| /linux-4.1.27/arch/arm/mach-omap1/ |
| D | clock_data.c | 116 .set_rate = &omap1_set_sossi_rate,
126 .set_rate = omap1_clk_set_rate_ckctl_arm,
140 .set_rate = omap1_clk_set_rate_ckctl_arm,
220 .set_rate = omap1_clk_set_rate_ckctl_arm,
230 .set_rate = omap1_clk_set_rate_ckctl_arm,
242 .set_rate = &omap1_clk_set_rate_dsp_domain,
272 .set_rate = omap1_clk_set_rate_ckctl_arm,
393 .set_rate = omap1_clk_set_rate_ckctl_arm,
407 .set_rate = omap1_clk_set_rate_ckctl_arm,
427 .set_rate = &omap1_set_uart_rate,
[all …]
|
| D | clock.h | 151 int (*set_rate)(struct clk *, unsigned long); member
|
| D | clock.c | 573 if (clk->set_rate) in omap1_clk_set_rate()
574 ret = clk->set_rate(clk, rate); in omap1_clk_set_rate()
|
| /linux-4.1.27/arch/arm/mach-ep93xx/ |
| D | clock.c | 39 int (*set_rate)(struct clk *clk, unsigned long rate); member
99 .set_rate = set_keytchclk_rate,
114 .set_rate = set_div_rate,
121 .set_rate = set_div_rate,
129 .set_rate = set_i2s_sclk_rate,
137 .set_rate = set_i2s_lrclk_rate,
471 if (clk->set_rate) in clk_set_rate()
472 return clk->set_rate(clk, rate); in clk_set_rate()
|
| /linux-4.1.27/drivers/clk/st/ |
| D | clk-flexgen.c | 156 clk_divider_ops.set_rate(pdiv_hw, parent_rate, parent_rate); in flexgen_set_rate()
157 ret = clk_divider_ops.set_rate(fdiv_hw, rate, rate * div); in flexgen_set_rate()
159 clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate); in flexgen_set_rate()
160 ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * div); in flexgen_set_rate()
174 .set_rate = flexgen_set_rate,
|
| D | clkgen-mux.c | 190 return clk_divider_ops.set_rate(div_hw, rate, parent_rate); in clkgena_divmux_set_rate()
212 .set_rate = clkgena_divmux_set_rate,
|
| D | clkgen-fsyn.c | 614 .set_rate = quadfs_pll_fs660c32_set_rate,
1017 .set_rate = quadfs_set_rate,
|
| /linux-4.1.27/arch/avr32/mach-at32ap/ |
| D | clock.c | 144 if (!clk->set_rate) in clk_round_rate()
148 actual_rate = clk->set_rate(clk, rate, 0); in clk_round_rate()
163 if (!clk->set_rate) in clk_set_rate()
167 ret = clk->set_rate(clk, rate, 1); in clk_set_rate()
|
| D | clock.h | 27 long (*set_rate)(struct clk *clk, unsigned long rate, member
|
| D | at32ap700x.c | 320 .set_rate = pll1_set_rate,
485 .set_rate = cpu_clk_set_rate,
1480 .set_rate = genclk_set_rate,
2125 .set_rate = genclk_set_rate,
2182 .set_rate = genclk_set_rate,
2190 .set_rate = genclk_set_rate,
2198 .set_rate = genclk_set_rate,
2206 .set_rate = genclk_set_rate,
2214 .set_rate = genclk_set_rate,
|
| /linux-4.1.27/arch/mips/jz4740/ |
| D | clock.c | 330 .set_rate = jz_clk_main_set_rate,
560 .set_rate = jz_clk_ldclk_set_rate,
576 .set_rate = jz_clk_divided_set_rate,
585 .set_rate = jz_clk_divided_set_rate,
594 .set_rate = jz_clk_divided_set_rate,
656 .set_rate = jz_clk_udc_set_rate,
765 if (!clk->ops->set_rate) in clk_set_rate()
767 return clk->ops->set_rate(clk, rate); in clk_set_rate()
|
| D | clock.h | 36 int (*set_rate)(struct clk *clk, unsigned long rate); member
|
| /linux-4.1.27/drivers/sh/clk/ |
| D | cpg.c | 197 .set_rate = sh_clk_div_set_rate,
203 .set_rate = sh_clk_div_set_rate,
330 .set_rate = sh_clk_div_set_rate,
382 .set_rate = sh_clk_div_set_rate,
462 .set_rate = fsidiv_set_rate,
|
| D | core.c | 483 if (likely(clk->ops && clk->ops->set_rate)) { in clk_set_rate()
484 ret = clk->ops->set_rate(clk, rate); in clk_set_rate()
658 if (likely(clkp->ops->set_rate)) in clks_core_resume()
659 clkp->ops->set_rate(clkp, rate); in clks_core_resume()
|
| /linux-4.1.27/drivers/clk/mxs/ |
| D | clk-div.c | 64 ret = div->ops->set_rate(&div->divider.hw, rate, parent_rate); in clk_div_set_rate()
74 .set_rate = clk_div_set_rate,
|
| D | clk-frac.c | 108 .set_rate = clk_frac_set_rate,
|
| D | clk-ref.c | 125 .set_rate = clk_ref_set_rate,
|
| /linux-4.1.27/arch/mips/loongson/lemote-2f/ |
| D | clock.c | 99 if (likely(clk->ops && clk->ops->set_rate)) { in clk_set_rate()
103 ret = clk->ops->set_rate(clk, rate, 0); in clk_set_rate()
|
| /linux-4.1.27/drivers/clk/tegra/ |
| D | clk-periph.c | 80 return div_ops->set_rate(div_hw, rate, parent_rate); in clk_periph_set_rate()
119 .set_rate = clk_periph_set_rate,
138 .set_rate = clk_periph_set_rate,
|
| D | clk-audio-sync.c | 53 .set_rate = clk_sync_source_set_rate,
|
| D | clk-divider.c | 146 .set_rate = clk_frac_div_set_rate,
|
| D | clk-pll.c | 809 .set_rate = clk_pll_set_rate,
1520 .set_rate = clk_pllxc_set_rate,
1529 .set_rate = clk_pllm_set_rate,
1538 .set_rate = clk_pllc_set_rate,
1547 .set_rate = clk_pllre_set_rate,
1817 .set_rate = clk_pllxc_set_rate,
|
| /linux-4.1.27/arch/sh/kernel/cpu/sh4/ |
| D | clock-sh4-202.c | 84 if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0) in shoc_clk_init()
136 .set_rate = shoc_clk_set_rate,
|
| /linux-4.1.27/arch/blackfin/mach-bf609/ |
| D | clock.c | 127 if (clk->ops && clk->ops->set_rate) in clk_set_rate()
128 ret = clk->ops->set_rate(clk, rate); in clk_set_rate()
262 .set_rate = pll_set_rate,
271 .set_rate = sys_clk_set_rate,
|
| /linux-4.1.27/drivers/clk/ti/ |
| D | dpll.c | 36 .set_rate = &omap3_noncore_dpll_set_rate,
59 .set_rate = &omap3_noncore_dpll_set_rate,
70 .set_rate = &omap3_noncore_dpll_set_rate,
87 .set_rate = &omap2_reprogram_dpllcore,
109 .set_rate = &omap3_noncore_dpll_set_rate,
121 .set_rate = &omap3_dpll4_set_rate,
|
| D | fapll.c | 277 .set_rate = ti_fapll_set_rate,
486 .set_rate = ti_fapll_synth_set_rate,
|
| D | composite.c | 54 .set_rate = &ti_composite_set_rate,
|
| D | clk-dra7-atl.c | 164 .set_rate = atl_clk_set_rate,
|
| D | divider.c | 252 .set_rate = ti_clk_divider_set_rate,
|
| /linux-4.1.27/arch/arm/mach-lpc32xx/ |
| D | clock.h | 28 int (*set_rate) (struct clk *, unsigned long); member
|
| D | clock.c | 519 .set_rate = local_usbpll_set_rate,
976 .set_rate = mmc_set_rate,
1059 .set_rate = clcd_set_rate,
1155 if (clk->set_rate) in clk_set_rate()
1156 ret = clk->set_rate(clk, rate); in clk_set_rate()
|
| /linux-4.1.27/drivers/clk/mvebu/ |
| D | clk-corediv.c | 200 .set_rate = clk_corediv_set_rate,
216 .set_rate = clk_corediv_set_rate,
229 .set_rate = clk_corediv_set_rate,
|
| D | clk-cpu.c | 164 .set_rate = clk_cpu_set_rate,
|
| /linux-4.1.27/drivers/clk/ux500/ |
| D | clk-prcmu.c | 198 .set_rate = clk_prcmu_set_rate,
215 .set_rate = clk_prcmu_set_rate,
242 .set_rate = clk_prcmu_set_rate,
|
| /linux-4.1.27/arch/arm/mach-imx/ |
| D | clk-pllv3.c | 142 .set_rate = clk_pllv3_set_rate,
196 .set_rate = clk_pllv3_sys_set_rate,
268 .set_rate = clk_pllv3_av_set_rate,
|
| D | clk-busy.c | 68 ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate); in clk_busy_divider_set_rate()
78 .set_rate = clk_busy_divider_set_rate,
|
| D | clk-cpu.c | 74 .set_rate = clk_cpu_set_rate,
|
| D | clk-pfd.c | 127 .set_rate = clk_pfd_set_rate,
|
| D | clk-fixup-div.c | 92 .set_rate = clk_fixup_div_set_rate,
|
| D | clk-pllv2.c | 237 .set_rate = clk_pllv2_set_rate,
|
| /linux-4.1.27/drivers/clk/ |
| D | clk-composite.c | 154 return rate_ops->set_rate(rate_hw, rate, parent_rate); in clk_composite_set_rate()
245 if (rate_ops->set_rate) { in clk_register_composite()
247 clk_composite_ops->set_rate = in clk_register_composite()
|
| D | clk-fixed-factor.c | 63 .set_rate = clk_factor_set_rate,
|
| D | clk-highbank.c | 201 .set_rate = clk_pll_set_rate,
271 .set_rate = clk_periclk_set_rate,
|
| D | clk-mb86s7x.c | 175 .set_rate = crg_port_set_rate,
327 .set_rate = clc_set_rate,
|
| D | clk-vt8500.c | 215 .set_rate = vt8500_dclk_set_rate,
224 .set_rate = vt8500_dclk_set_rate,
646 .set_rate = vtwm_pll_set_rate,
|
| D | clk-fractional-divider.c | 98 .set_rate = clk_fd_set_rate,
|
| D | clk-cdce706.c | 259 .set_rate = cdce706_pll_set_rate,
383 .set_rate = cdce706_divider_set_rate,
448 .set_rate = cdce706_clkout_set_rate,
|
| D | clk-u300.c | 688 .set_rate = syscon_clk_set_rate,
1110 .set_rate = mclk_clk_set_rate,
|
| D | clk-si5351.c | 340 .set_rate = si5351_vxco_set_rate,
536 .set_rate = si5351_pll_set_rate,
780 .set_rate = si5351_msynth_set_rate,
1097 .set_rate = si5351_clkout_set_rate,
|
| D | clk-wm831x.c | 228 .set_rate = wm831x_fll_set_rate,
|
| D | clk.c | 1782 if (!skip_set_rate && clk->ops->set_rate) in clk_change_rate()
1783 clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); in clk_change_rate()
2294 if (clk->ops->set_rate && in __clk_init()
2311 !(clk->ops->set_parent && clk->ops->set_rate)) { in __clk_init()
2622 .set_rate = clk_nodrv_set_rate,
|
| D | clk-si570.c | 371 .set_rate = si570_set_rate,
|
| D | clk-axi-clkgen.c | 467 .set_rate = axi_clkgen_set_rate,
|
| D | clk-divider.c | 411 .set_rate = clk_divider_set_rate,
|
| D | clk-xgene.c | 394 .set_rate = xgene_clk_set_rate,
|
| /linux-4.1.27/arch/blackfin/mach-common/ |
| D | clock.h | 9 int (*set_rate)(struct clk *clk, unsigned long rate); member
|
| /linux-4.1.27/arch/mips/include/asm/ |
| D | clock.h | 16 int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id); member
|
| /linux-4.1.27/sound/usb/6fire/ |
| D | control.h | 35 int (*set_rate)(struct control_runtime *rt, int rate); member
|
| D | control.c | 567 rt->set_rate = usb6fire_control_set_rate; in usb6fire_control_init()
|
| D | pcm.c | 88 ret = ctrl_rt->set_rate(ctrl_rt, rt->rate); in usb6fire_pcm_set_rate()
|
| /linux-4.1.27/arch/arm/mach-shmobile/ |
| D | clock-sh73a0.c | 273 ret = div4_clk_ops->set_rate(clk, rate / 2); in zclk_set_rate()
288 ret = div4_clk_ops->set_rate(clk, rate); in zclk_set_rate()
328 return div4_clk_ops->set_rate(clk, rate); in kicker_set_rate()
342 kicker_ops.set_rate = kicker_set_rate; in div4_clk_extend()
343 zclk_ops.set_rate = zclk_set_rate; in div4_clk_extend()
515 .set_rate = dsiphy_set_rate,
|
| D | clock-r8a7740.c | 251 .set_rate = usb24_set_rate,
421 .set_rate = hdmi12_set_rate,
|
| /linux-4.1.27/drivers/staging/clocking-wizard/ |
| D | TODO | 4 - support for set_rate() operations (may benefit from Stephen Boyd's
|
| /linux-4.1.27/drivers/clk/samsung/ |
| D | clk-pll.c | 223 .set_rate = samsung_pll35xx_set_rate,
334 .set_rate = samsung_pll36xx_set_rate,
471 .set_rate = samsung_pll45xx_set_rate,
630 .set_rate = samsung_pll46xx_set_rate,
859 .set_rate = samsung_s3c2410_pll_set_rate,
867 .set_rate = samsung_s3c2410_pll_set_rate,
875 .set_rate = samsung_s3c2410_pll_set_rate,
1056 .set_rate = samsung_pll2550xx_set_rate,
1150 .set_rate = samsung_pll2650xx_set_rate,
|
| /linux-4.1.27/arch/blackfin/include/asm/ |
| D | clocks.h | 56 int (*set_rate)(struct clk *clk, unsigned long rate); member
|
| /linux-4.1.27/include/media/ |
| D | v4l2-clk.h | 42 int (*set_rate)(struct v4l2_clk *clk, unsigned long); member
|
| /linux-4.1.27/drivers/clk/at91/ |
| D | clk-usb.c | 160 .set_rate = at91sam9x5_clk_usb_set_rate,
196 .set_rate = at91sam9x5_clk_usb_set_rate,
340 .set_rate = at91rm9200_clk_usb_set_rate,
|
| D | clk-h32mx.c | 92 .set_rate = clk_sama5d4_h32mx_set_rate,
|
| D | clk-plldiv.c | 79 .set_rate = clk_plldiv_set_rate,
|
| D | clk-smd.c | 113 .set_rate = at91sam9x5_clk_smd_set_rate,
|
| D | clk-programmable.c | 171 .set_rate = clk_programmable_set_rate,
|
| D | clk-peripheral.c | 309 .set_rate = clk_sam9x5_peripheral_set_rate,
|
| D | clk-pll.c | 307 .set_rate = clk_pll_set_rate,
|
| /linux-4.1.27/drivers/clk/qcom/ |
| D | clk-rcg2.c | 299 .set_rate = clk_rcg2_set_rate,
425 .set_rate = clk_edp_pixel_set_rate,
483 .set_rate = clk_byte_set_rate,
570 .set_rate = clk_pixel_set_rate,
|
| D | clk-regmap-divider.c | 67 .set_rate = div_set_rate,
|
| D | clk-rcg.c | 632 .set_rate = clk_rcg_set_rate,
643 .set_rate = clk_rcg_bypass_set_rate,
654 .set_rate = clk_rcg_lcc_set_rate,
666 .set_rate = clk_dyn_rcg_set_rate,
|
| D | clk-pll.c | 188 .set_rate = clk_pll_set_rate,
|
| /linux-4.1.27/drivers/media/v4l2-core/ |
| D | v4l2-clk.c | 208 if (!clk->ops->set_rate) in v4l2_clk_set_rate()
211 ret = clk->ops->set_rate(clk, rate); in v4l2_clk_set_rate()
|
| /linux-4.1.27/Documentation/ |
| D | clk.txt | 28 clk_ops, such as .enable or .set_rate, implies the hardware-specific
82 int (*set_rate)(struct clk_hw *hw,
213 .set_rate | | y | | | |
292 can for instance cause a .set_rate operation of one clock being called from
293 within the .set_rate operation of another clock. This case must be considered
|
| /linux-4.1.27/arch/arm/mach-davinci/ |
| D | clock.h | 104 int (*set_rate) (struct clk *clk, unsigned long rate); member
|
| D | da850.c | 62 .set_rate = davinci_simple_set_rate,
70 .set_rate = da850_set_pll0rate,
98 .set_rate = davinci_set_sysclk_rate,
284 .set_rate = da850_set_armrate,
|
| D | clock.c | 165 if (clk->set_rate) in clk_set_rate()
166 ret = clk->set_rate(clk, rate); in clk_set_rate()
|
| D | dm646x.c | 67 .set_rate = davinci_simple_set_rate,
|
| /linux-4.1.27/arch/c6x/include/asm/ |
| D | clock.h | 95 int (*set_rate) (struct clk *clk, unsigned long rate); member
|
| /linux-4.1.27/drivers/clk/versatile/ |
| D | clk-vexpress-osc.c | 67 .set_rate = vexpress_osc_set_rate,
|
| D | clk-icst.c | 121 .set_rate = icst_set_rate,
|
| /linux-4.1.27/drivers/clk/spear/ |
| D | clk-vco-pll.c | 171 .set_rate = clk_pll_set_rate,
272 .set_rate = clk_vco_set_rate,
|
| D | clk-frac-synth.c | 122 .set_rate = clk_frac_set_rate,
|
| D | clk-gpt-synth.c | 111 .set_rate = clk_gpt_set_rate,
|
| D | clk-aux-synth.c | 134 .set_rate = clk_aux_set_rate,
|
| /linux-4.1.27/drivers/clk/sirf/ |
| D | clk-common.c | 188 .set_rate = pll_clk_set_rate,
439 .set_rate = dmn_clk_set_rate,
492 .set_rate = cpu_clk_set_rate,
516 .set_rate = dmn_clk_set_rate,
|
| /linux-4.1.27/arch/c6x/platforms/ |
| D | pll.c | 117 if (clk->set_rate) in clk_set_rate()
118 ret = clk->set_rate(clk, rate); in clk_set_rate()
|
| /linux-4.1.27/drivers/net/ethernet/renesas/ |
| D | sh_eth.c | 472 .set_rate = sh_eth_set_rate_r8a777x,
495 .set_rate = sh_eth_set_rate_r8a777x,
537 .set_rate = sh_eth_set_rate_sh7724,
577 .set_rate = sh_eth_set_rate_sh7757,
647 .set_rate = sh_eth_set_rate_giga,
706 .set_rate = sh_eth_set_rate_gether,
735 .set_rate = sh_eth_set_rate_gether,
774 .set_rate = sh_eth_set_rate_gether,
1344 if (mdp->cd->set_rate) in sh_eth_dev_init()
1345 mdp->cd->set_rate(ndev); in sh_eth_dev_init()
[all …]
|
| D | sh_eth.h | 460 void (*set_rate)(struct net_device *ndev); member
|
| /linux-4.1.27/drivers/gpu/drm/msm/mdp/mdp4/ |
| D | mdp4_lvds_pll.c | 133 .set_rate = mpd4_lvds_pll_set_rate,
|
| /linux-4.1.27/arch/arm/mach-omap2/ |
| D | clkt2xxx_virt_prcm_set.c | 218 .set_rate = &omap2_select_table_rate,
|
| /linux-4.1.27/drivers/clk/pistachio/ |
| D | clk-pll.c | 219 .set_rate = pll_gf40lp_frac_set_rate,
326 .set_rate = pll_gf40lp_laint_set_rate,
|
| /linux-4.1.27/arch/mips/alchemy/common/ |
| D | clock.c | 227 .set_rate = alchemy_clk_aux_setr,
579 .set_rate = alchemy_clk_fgv1_setr,
724 .set_rate = alchemy_clk_fgv2_setr,
936 .set_rate = alchemy_clk_csrc_setr,
|
| /linux-4.1.27/sound/soc/sh/ |
| D | fsi.c | 244 int (*set_rate)(struct device *dev, member
737 int (*set_rate)(struct device *dev, in fsi_clk_init()
748 clock->set_rate = set_rate; in fsi_clk_init()
804 return fsi->clock.set_rate && in fsi_clk_is_valid()
818 ret = clock->set_rate(dev, fsi); in fsi_clk_enable()
|
| /linux-4.1.27/drivers/clk/sunxi/ |
| D | clk-sun6i-ar100.c | 170 .set_rate = ar100_set_rate,
|
| D | clk-factors.c | 158 .set_rate = clk_factors_set_rate,
|
| D | clk-sunxi.c | 187 .set_rate = sun6i_ahb1_clk_set_rate,
|
| /linux-4.1.27/sound/firewire/oxfw/ |
| D | oxfw-stream.c | 42 static int set_rate(struct snd_oxfw *oxfw, unsigned int rate) in set_rate() function
89 return set_rate(oxfw, rate); in set_stream_format()
|
| /linux-4.1.27/include/linux/ |
| D | sh_clk.h | 28 int (*set_rate)(struct clk *clk, unsigned long rate); member
|
| D | clk-provider.h | 186 int (*set_rate)(struct clk_hw *hw, unsigned long rate, member
|
| /linux-4.1.27/drivers/clk/mmp/ |
| D | clk-frac.c | 155 .set_rate = clk_factor_set_rate,
|
| D | clk-mix.c | 435 .set_rate = mmp_clk_set_rate,
|
| /linux-4.1.27/drivers/input/mouse/ |
| D | psmouse.h | 73 void (*set_rate)(struct psmouse *psmouse, unsigned int rate); member
|
| D | focaltech.c | 436 psmouse->set_rate = focaltech_set_rate; in focaltech_init()
|
| D | psmouse-base.c | 728 psmouse->set_rate = psmouse_set_rate; in psmouse_apply_defaults()
1216 psmouse->set_rate(psmouse, psmouse->rate); in psmouse_initialize()
1871 psmouse->set_rate(psmouse, value); in psmouse_attr_set_rate()
|
| D | elantech.c | 1658 etd->original_set_rate = psmouse->set_rate; in elantech_init()
1659 psmouse->set_rate = elantech_set_rate_restore_reg_07; in elantech_init()
|
| D | cypress_ps2.c | 693 psmouse->set_rate = cypress_set_rate; in cypress_init()
|
| D | synaptics.c | 1516 psmouse->set_rate = synaptics_set_rate; in __synaptics_init()
|
| /linux-4.1.27/drivers/clk/shmobile/ |
| D | clk-div6.c | 172 .set_rate = cpg_div6_clock_set_rate,
|
| D | clk-rcar-gen2.c | 135 .set_rate = cpg_z_clk_set_rate,
|
| /linux-4.1.27/sound/pci/ice1712/ |
| D | maya44.c | 601 static void set_rate(struct snd_ice1712 *ice, unsigned int rate) in set_rate() function
712 ice->gpio.set_pro_rate = set_rate; in maya44_init()
|
| D | ice1712.h | 386 void (*set_rate)(struct snd_ice1712 *ice, unsigned int rate); member
|
| D | juli.c | 648 ice->set_rate = juli_set_rate; in juli_init()
|
| D | ice1724.c | 689 ice->set_rate(ice, rate); in snd_vt1724_set_pro_rate()
2684 if (!ice->set_rate) in snd_vt1724_probe()
2685 ice->set_rate = stdclock_set_rate; in snd_vt1724_probe()
|
| D | quartet.c | 1020 ice->set_rate = qtet_set_rate; in qtet_init()
|
| /linux-4.1.27/drivers/tty/serial/ |
| D | sirfsoc_uart.c | 784 sirfsoc_usp_calc_sample_div(unsigned long set_rate, in sirfsoc_usp_calc_sample_div() argument
795 (ioclk_rate + (set_rate * sample_div) / 2) in sirfsoc_usp_calc_sample_div()
796 / (set_rate * sample_div) * set_rate * sample_div; in sirfsoc_usp_calc_sample_div()
801 (set_rate * sample_div) + 1) / 2 - 1; in sirfsoc_usp_calc_sample_div()
|
| /linux-4.1.27/Documentation/trace/ |
| D | events-power.txt | 55 clock rate for set_rate.
|
| /linux-4.1.27/drivers/gpu/drm/msm/hdmi/ |
| D | hdmi_phy_8960.c | 404 .set_rate = hdmi_pll_set_rate,
|
| /linux-4.1.27/drivers/clk/rockchip/ |
| D | clk-pll.c | 320 .set_rate = rockchip_rk3066_pll_set_rate,
|
| /linux-4.1.27/arch/arm/mach-vexpress/ |
| D | spc.c | 529 .set_rate = spc_set_rate,
|
| /linux-4.1.27/sound/spi/ |
| D | at73c213.c | 182 goto set_rate; in snd_at73c213_set_bitrate()
190 set_rate: in snd_at73c213_set_bitrate()
|
| /linux-4.1.27/drivers/rtc/ |
| D | rtc-hym8563.c | 398 .set_rate = hym8563_clkout_set_rate,
|
| /linux-4.1.27/drivers/tty/ |
| D | synclink_gt.c | 477 static void set_rate(struct slgt_info *info, u32 data_rate);
3951 set_rate(info, info->params.clock_speed); in enable_loopback()
3953 set_rate(info, 3686400); in enable_loopback()
3960 static void set_rate(struct slgt_info *info, u32 rate) in set_rate() function
4260 set_rate(info, info->params.data_rate * 8); in async_mode()
4263 set_rate(info, info->params.data_rate * 16); in async_mode()
4461 set_rate(info, info->params.clock_speed * 16); in sync_mode()
4464 set_rate(info, info->params.clock_speed); in sync_mode()
|
| D | synclinkmp.c | 591 static void set_rate(SLMP_INFO *info, u32 data_rate);
4066 set_rate(info, info->params.clock_speed); in enable_loopback()
4068 set_rate(info, 3686400); in enable_loopback()
4076 static void set_rate( SLMP_INFO *info, u32 data_rate ) in set_rate() function
4516 set_rate( info, info->params.data_rate * 16 ); in async_mode()
4629 set_rate(info, info->params.clock_speed * DpllDivisor); in hdlc_mode()
4631 set_rate(info, info->params.clock_speed); in hdlc_mode()
4715 set_rate(info, info->params.clock_speed); in hdlc_mode()
|
| /linux-4.1.27/drivers/clk/hisilicon/ |
| D | clk-hi3620.c | 428 .set_rate = mmc_clk_set_rate,
|
| /linux-4.1.27/drivers/gpu/drm/imx/ |
| D | imx-tve.c | 468 .set_rate = clk_tve_di_set_rate,
|
| /linux-4.1.27/drivers/clk/bcm/ |
| D | clk-kona.c | 1181 .set_rate = kona_peri_clk_set_rate,
|
| /linux-4.1.27/drivers/staging/rtl8712/ |
| D | rtl871x_ioctl_linux.c | 1359 goto set_rate; in r8711_wx_set_rate()
1403 set_rate: in r8711_wx_set_rate()
|
| /linux-4.1.27/drivers/staging/rtl8188eu/os_dep/ |
| D | ioctl_linux.c | 1434 goto set_rate; in rtw_wx_set_rate()
1480 set_rate: in rtw_wx_set_rate()
|
| /linux-4.1.27/drivers/media/platform/omap3isp/ |
| D | isp.c | 282 .set_rate = isp_xclk_set_rate,
|