/linux-4.1.27/arch/mips/bcm47xx/ |
H A D | workarounds.c | 12 err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power"); bcm47xx_workarounds_netgear_wnr3500l()
|
/linux-4.1.27/arch/arm/mach-s3c24xx/ |
H A D | common-smdk.c | 187 { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL }, 188 { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL }, 189 { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL }, 190 { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
|
H A D | mach-nexcoder.c | 122 gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL); nexcoder_sensorboard_init() 124 gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL); nexcoder_sensorboard_init() 128 gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL); nexcoder_sensorboard_init()
|
H A D | mach-osiris.c | 276 gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL); osiris_pm_suspend() 376 gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); osiris_map_io()
|
H A D | pm-s3c2410.c | 83 gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); s3c2410_pm_prepare()
|
H A D | mach-jive.c | 523 gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL); jive_power_off() 637 gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL); jive_machine_init()
|
H A D | mach-anubis.c | 402 gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); anubis_map_io()
|
H A D | mach-qt2410.c | 336 WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); qt2410_machine_init()
|
H A D | mach-mini2440.c | 642 WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL)); mini2440_init()
|
/linux-4.1.27/arch/arm/mach-pxa/ |
H A D | hx4700.c | 851 { GPIO59_HX4700_LCD_PC1, GPIOF_OUT_INIT_HIGH, "LCD_PC1" }, 852 { GPIO62_HX4700_LCD_nRESET, GPIOF_OUT_INIT_HIGH, "LCD_RESET" }, 853 { GPIO70_HX4700_LCD_SLIN1, GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" }, 854 { GPIO84_HX4700_LCD_SQN, GPIOF_OUT_INIT_HIGH, "LCD_SQN" }, 855 { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, 856 { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, 857 { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, 858 { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, 859 { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, 860 { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, 861 { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, 862 { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
|
H A D | spitz_pm.c | 113 gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); spitz_presuspend()
|
H A D | cm-x300.c | 772 { 71, GPIOF_OUT_INIT_HIGH, "wlan en" }, 773 { 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
|
H A D | magician.c | 728 { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
|
H A D | mioa701.c | 712 { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
|
/linux-4.1.27/drivers/pcmcia/ |
H A D | pxa2xx_stargate2.c | 37 { SG2_S0_GPIO_RESET, GPIOF_OUT_INIT_HIGH, "PCMCIA Reset" }, 38 { SG2_S0_POWER_CTL, GPIOF_OUT_INIT_HIGH, "PCMCIA Power Ctrl" },
|
/linux-4.1.27/sound/soc/pxa/ |
H A D | e750_wm9705.c | 107 { GPIO_E750_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Headphone amp" }, 108 { GPIO_E750_SPK_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
|
H A D | e800_wm9712.c | 106 { GPIO_E800_SPK_AMP_ON, GPIOF_OUT_INIT_HIGH, "Headphone amp" }, 107 { GPIO_E800_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
|
H A D | e740_wm9705.c | 126 { GPIO_E740_WM9705_nAVDD2, GPIOF_OUT_INIT_HIGH, "Audio power" },
|
H A D | hx4700.c | 179 { GPIO107_HX4700_SPK_nSD, GPIOF_OUT_INIT_HIGH, "SPK_POWER" },
|
/linux-4.1.27/drivers/mtd/nand/ |
H A D | ams-delta.c | 142 .flags = GPIOF_OUT_INIT_HIGH, 147 .flags = GPIOF_OUT_INIT_HIGH, 152 .flags = GPIOF_OUT_INIT_HIGH, 157 .flags = GPIOF_OUT_INIT_HIGH,
|
/linux-4.1.27/drivers/misc/eeprom/ |
H A D | digsy_mtc_eeprom.c | 75 ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH, digsy_mtc_eeprom_devices_init()
|
/linux-4.1.27/include/linux/regulator/ |
H A D | lp872x.h | 46 DVS_HIGH = GPIOF_OUT_INIT_HIGH,
|
/linux-4.1.27/sound/soc/codecs/ |
H A D | wm1250-ev1.c | 176 wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH; wm1250_ev1_pdata() 177 wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH; wm1250_ev1_pdata()
|
H A D | pcm3008.c | 125 GPIOF_OUT_INIT_HIGH, "codec_dem0"); pcm3008_codec_probe()
|
H A D | ak4104.c | 303 GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, ak4104_spi_probe()
|
H A D | ssm2518.c | 771 GPIOF_OUT_INIT_HIGH, "SSM2518 nSD"); ssm2518_i2c_probe()
|
H A D | wm5100.c | 2362 GPIOF_OUT_INIT_HIGH, "WM5100 HP_POL"); wm5100_probe() 2477 GPIOF_OUT_INIT_HIGH, "WM5100 LDOENA"); wm5100_i2c_probe() 2488 GPIOF_OUT_INIT_HIGH, "WM5100 /RESET"); wm5100_i2c_probe()
|
H A D | cs4270.c | 688 GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, cs4270_i2c_probe()
|
H A D | wm0010.c | 932 gpio_flags = GPIOF_OUT_INIT_HIGH; wm0010_spi_probe()
|
H A D | wm2200.c | 2265 GPIOF_OUT_INIT_HIGH, wm2200_i2c_probe() 2277 GPIOF_OUT_INIT_HIGH, wm2200_i2c_probe()
|
H A D | cs42l52.c | 1204 GPIOF_OUT_INIT_HIGH, cs42l52_i2c_probe()
|
H A D | cs42l56.c | 1279 GPIOF_OUT_INIT_HIGH, "CS42L56 /RST"); cs42l56_i2c_probe()
|
H A D | tlv320aic31xx.c | 1211 GPIOF_OUT_INIT_HIGH, aic31xx_device_init()
|
H A D | cs42l73.c | 1423 GPIOF_OUT_INIT_HIGH, cs42l73_i2c_probe()
|
H A D | rt5640.c | 2232 GPIOF_OUT_INIT_HIGH, rt5640_i2c_probe()
|
H A D | rt5677.c | 5051 GPIOF_OUT_INIT_HIGH, rt5677_i2c_probe()
|
/linux-4.1.27/drivers/regulator/ |
H A D | gpio-regulator.c | 199 GPIOF_OUT_INIT_HIGH; of_get_gpio_regulator_config() 326 if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH) gpio_regulator_probe() 343 cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; gpio_regulator_probe() 350 cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; gpio_regulator_probe()
|
H A D | max8952.c | 231 config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; max8952_pmic_probe() 248 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; max8952_pmic_probe() 254 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; max8952_pmic_probe()
|
H A D | fixed.c | 171 cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; reg_fixed_voltage_probe() 178 cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; reg_fixed_voltage_probe()
|
H A D | tps62360-regulator.c | 432 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; tps62360_probe() 443 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; tps62360_probe()
|
H A D | lp8788-buck.c | 77 DVS_HIGH = GPIOF_OUT_INIT_HIGH,
|
H A D | lp8788-ldo.c | 88 #define ENABLE GPIOF_OUT_INIT_HIGH
|
H A D | da9055-regulator.c | 459 config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; da9055_gpio_init()
|
H A D | max77686.c | 272 config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; max77686_of_parse_cb()
|
H A D | max8973-regulator.c | 428 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; max8973_probe()
|
H A D | tps65090-regulator.c | 312 gpio_flag = GPIOF_OUT_INIT_HIGH; tps65090_configure_regulator_config()
|
H A D | s2mps11.c | 1044 config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH; s2mps11_pmic_probe()
|
H A D | s5m8767.c | 469 config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; s5m8767_regulator_config_ext_control()
|
/linux-4.1.27/drivers/net/wireless/brcm80211/brcmsmac/ |
H A D | led.c | 89 active_low ? GPIOF_OUT_INIT_HIGH brcms_led_register()
|
/linux-4.1.27/arch/arm/mach-omap2/ |
H A D | gpmc-smsc911x.c | 69 GPIOF_OUT_INIT_HIGH, "smsc911x reset"); gpmc_smsc911x_init()
|
H A D | pdata-quirks.c | 68 res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, omap3_sbc_t3730_twl_callback() 184 { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" }, 185 { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
|
H A D | board-overo.c | 488 { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, 531 ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, overo_init() 553 ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, overo_init()
|
H A D | board-ldp.c | 230 {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, ldp_display_init() 231 {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, ldp_display_init()
|
H A D | board-rx51-peripherals.c | 295 GPIOF_OUT_INIT_HIGH, "isp1704_reset")); rx51_charger_init() 1187 { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" },
|
H A D | board-omap3pandora.c | 307 ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); omap3pandora_twl_gpio_setup()
|
H A D | board-cm-t35.c | 456 if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { cm_t35_twl_gpio_setup()
|
/linux-4.1.27/drivers/leds/ |
H A D | leds-ns2.c | 203 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, create_ns2_led() 213 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, create_ns2_led()
|
H A D | leds-lt3593.c | 109 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, create_lt3593_led()
|
H A D | leds-bd2802.c | 689 gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB"); bd2802_probe()
|
/linux-4.1.27/drivers/nfc/st21nfcb/ |
H A D | i2c.c | 248 GPIOF_OUT_INIT_HIGH, "clf_reset"); st21nfcb_nci_i2c_of_request_resources() 283 phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset"); st21nfcb_nci_i2c_request_resources()
|
/linux-4.1.27/drivers/char/tpm/st33zp24/ |
H A D | i2c.c | 140 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); st33zp24_i2c_of_request_resources() 173 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, st33zp24_i2c_request_resources()
|
H A D | spi.c | 260 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); tpm_stm_spi_of_request_resources() 293 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, tpm_stm_spi_request_resources()
|
/linux-4.1.27/drivers/video/fbdev/omap2/displays-new/ |
H A D | panel-sharp-ls037v7dw01.c | 247 r = sharp_ls_get_gpio(&pdev->dev, pdata->lr_gpio, GPIOF_OUT_INIT_HIGH, sharp_ls_probe_pdata() 251 r = sharp_ls_get_gpio(&pdev->dev, pdata->ud_gpio, GPIOF_OUT_INIT_HIGH, sharp_ls_probe_pdata()
|
H A D | panel-nec-nl8048hl11.c | 332 GPIOF_OUT_INIT_HIGH, "lcd QVGA"); nec_8048_probe()
|
/linux-4.1.27/drivers/power/ |
H A D | tosa_battery.c | 316 { TOSA_GPIO_CHARGE_OFF, GPIOF_OUT_INIT_HIGH, "main charge off" }, 317 { TOSA_GPIO_CHARGE_OFF_JC, GPIOF_OUT_INIT_HIGH, "jacket charge off" },
|
H A D | isp1704_charger.c | 424 GPIOF_OUT_INIT_HIGH, "isp1704_reset"); isp1704_charger_probe()
|
/linux-4.1.27/arch/arm/mach-clps711x/ |
H A D | board-p720t.c | 172 { PLD_COM1_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM1_EN" }, 173 { PLD_COM2_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM2_EN" },
|
H A D | board-autcpu12.c | 164 { AUTCPU12_DPOT_CS, GPIOF_OUT_INIT_HIGH, "DPOT CS" },
|
/linux-4.1.27/arch/arm/mach-imx/ |
H A D | mach-mx27_3ds.c | 170 { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" }, 171 { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
|
H A D | mach-mx31_3ds.c | 174 { MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" }, 175 { MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
|
/linux-4.1.27/sound/soc/samsung/ |
H A D | neo1973_wm8753.c | 314 { S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" }, 315 { S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
|
/linux-4.1.27/drivers/clk/ |
H A D | clk-gpio-gate.c | 83 gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_HIGH; clk_register_gpio_gate()
|
/linux-4.1.27/drivers/watchdog/ |
H A D | gpio_wdt.c | 190 f = priv->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; gpio_wdt_probe()
|
H A D | mtx-1_wdt.c | 212 GPIOF_OUT_INIT_HIGH, "mtx1-wdt"); mtx1_wdt_probe()
|
/linux-4.1.27/drivers/staging/fbtft/ |
H A D | fb_agm1264k-fl.c | 158 return GPIOF_OUT_INIT_HIGH; request_gpios_match() 162 return GPIOF_OUT_INIT_HIGH; request_gpios_match()
|
H A D | fbtft-core.c | 88 return GPIOF_OUT_INIT_HIGH; fbtft_request_gpios_match() 94 return GPIOF_OUT_INIT_HIGH; fbtft_request_gpios_match() 97 return GPIOF_OUT_INIT_HIGH; fbtft_request_gpios_match() 100 return GPIOF_OUT_INIT_HIGH; fbtft_request_gpios_match() 115 return GPIOF_OUT_INIT_HIGH; fbtft_request_gpios_match() 183 GPIOF_OUT_INIT_HIGH; fbtft_request_one_gpio()
|
/linux-4.1.27/drivers/iio/common/ssp_sensors/ |
H A D | ssp_dev.c | 475 ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH, ssp_parse_dt() 481 GPIOF_OUT_INIT_HIGH, "mcu-reset-gpios"); ssp_parse_dt()
|
/linux-4.1.27/drivers/nfc/st21nfca/ |
H A D | i2c.c | 531 r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH, st21nfca_hci_i2c_of_request_resources() 574 GPIOF_OUT_INIT_HIGH, "clf_enable"); st21nfca_hci_i2c_request_resources()
|
/linux-4.1.27/arch/arm/mach-shmobile/ |
H A D | board-kzm9g.c | 873 gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */ kzm_init() 874 gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */ kzm_init()
|
H A D | board-armadillo800eva.c | 1253 gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ eva_init() 1276 gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ eva_init() 1292 gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL); eva_init()
|
/linux-4.1.27/drivers/i2c/busses/ |
H A D | i2c-cbus-gpio.c | 268 GPIOF_OUT_INIT_HIGH, "CBUS sel"); cbus_i2c_probe()
|
/linux-4.1.27/drivers/i2c/muxes/ |
H A D | i2c-arb-gpio-challenge.c | 154 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; i2c_arbitrator_probe()
|
/linux-4.1.27/drivers/usb/host/ |
H A D | ehci-exynos.c | 133 err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, exynos_setup_vbus_gpio()
|
/linux-4.1.27/drivers/video/backlight/ |
H A D | l4f00242t03.c | 194 GPIOF_OUT_INIT_HIGH, "lcd l4f00242t03 reset"); l4f00242t03_probe()
|
H A D | sky81452-backlight.c | 280 GPIOF_OUT_INIT_HIGH, "sky81452-en"); sky81452_bl_probe()
|
H A D | pwm_bl.c | 256 GPIOF_OUT_INIT_HIGH, "enable"); pwm_backlight_probe()
|
H A D | hx8357.c | 612 GPIOF_OUT_INIT_HIGH, hx8357_probe()
|
/linux-4.1.27/arch/arm/mach-ep93xx/ |
H A D | edb93xx.c | 112 GPIOF_OUT_INIT_HIGH, spi->modalias); edb93xx_cs4271_hw_setup()
|
/linux-4.1.27/sound/arm/ |
H A D | pxa2xx-ac97-lib.c | 347 ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH, pxa2xx_ac97_hw_probe()
|
/linux-4.1.27/sound/soc/blackfin/ |
H A D | bf5xx-ac97.c | 297 GPIOF_OUT_INIT_HIGH, "SND_AD198x RESET"); asoc_bfin_ac97_probe()
|
/linux-4.1.27/sound/soc/tegra/ |
H A D | tegra20_ac97.c | 353 GPIOF_OUT_INIT_HIGH, "codec-reset"); tegra20_ac97_platform_probe()
|
H A D | tegra_rt5677.c | 256 GPIOF_OUT_INIT_HIGH, "dmic_clk_en"); tegra_rt5677_probe()
|
H A D | tegra_wm8903.c | 278 GPIOF_OUT_INIT_HIGH, "hp_mute"); tegra_wm8903_driver_probe()
|
/linux-4.1.27/include/linux/ |
H A D | gpio.h | 17 #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) macro
|
/linux-4.1.27/drivers/spi/ |
H A D | spi-img-spfi.c | 460 GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, img_spfi_setup() 470 GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH); img_spfi_setup()
|
H A D | spi-adi-v3.c | 689 ret = gpio_request_one(chip->cs_gpio, GPIOF_OUT_INIT_HIGH, adi_spi_setup()
|
H A D | spi-s3c64xx.c | 809 err = gpio_request_one(spi->cs_gpio, GPIOF_OUT_INIT_HIGH, s3c64xx_spi_setup()
|
/linux-4.1.27/drivers/video/fbdev/ |
H A D | bf537-lq035.c | 391 if (gpio_request_one(LBR, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) { request_ports() 398 if (gpio_request_one(MOD, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) { request_ports()
|
H A D | ssd1307fb.c | 524 GPIOF_OUT_INIT_HIGH, ssd1307fb_probe()
|
H A D | bf54x-lq043fb.c | 243 if (gpio_request_one(disp, GPIOF_OUT_INIT_HIGH, DRIVER_NAME)) { request_ports()
|
/linux-4.1.27/drivers/mfd/ |
H A D | aat2870-core.c | 408 GPIOF_OUT_INIT_HIGH, "aat2870-en"); aat2870_i2c_probe()
|
/linux-4.1.27/drivers/usb/misc/ |
H A D | usb3503.c | 270 GPIOF_OUT_INIT_HIGH; usb3503_probe()
|
/linux-4.1.27/drivers/staging/iio/adc/ |
H A D | ad7606_core.c | 366 GPIOF_OUT_INIT_HIGH, ad7606_request_gpios()
|
/linux-4.1.27/drivers/pci/host/ |
H A D | pci-exynos.c | 314 GPIOF_OUT_INIT_HIGH, "RESET"); exynos_pcie_assert_reset()
|
/linux-4.1.27/drivers/input/touchscreen/ |
H A D | bu21013_ts.c | 554 error = gpio_request_one(pdata->cs_pin, GPIOF_OUT_INIT_HIGH, bu21013_probe()
|
/linux-4.1.27/drivers/media/i2c/ |
H A D | adv7183.c | 564 GPIOF_OUT_INIT_HIGH, adv7183_probe()
|
H A D | vs6624.c | 772 ret = devm_gpio_request_one(&client->dev, *ce, GPIOF_OUT_INIT_HIGH, vs6624_probe()
|
H A D | s5k6aa.c | 1516 flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW) s5k6aa_configure_gpios() 1528 flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW) s5k6aa_configure_gpios()
|
H A D | s5k4ecgx.c | 850 unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; s5k4ecgx_config_gpio()
|
H A D | ov9650.c | 1418 GPIOF_OUT_INIT_HIGH, "OV965X"); ov965x_configure_gpios()
|
/linux-4.1.27/drivers/media/i2c/m5mols/ |
H A D | m5mols_core.c | 956 ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; m5mols_probe()
|
/linux-4.1.27/drivers/staging/nvec/ |
H A D | nvec.c | 855 err = devm_gpio_request_one(&pdev->dev, nvec->gpio, GPIOF_OUT_INIT_HIGH, tegra_nvec_probe()
|
/linux-4.1.27/drivers/extcon/ |
H A D | extcon-arizona.c | 1217 mode = GPIOF_OUT_INIT_HIGH; arizona_extcon_probe()
|
/linux-4.1.27/drivers/media/usb/em28xx/ |
H A D | em28xx-dvb.c | 727 flags = GPIOF_OUT_INIT_HIGH; /* enable LNA */ em28xx_pctv_290e_set_lna()
|
/linux-4.1.27/drivers/net/ieee802154/ |
H A D | at86rf230.c | 1669 GPIOF_OUT_INIT_HIGH, "rstn"); at86rf230_probe()
|
/linux-4.1.27/drivers/usb/gadget/udc/ |
H A D | s3c2410_udc.c | 1861 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, s3c2410_udc_probe()
|
/linux-4.1.27/drivers/i2c/ |
H A D | i2c-core.c | 522 GPIOF_OUT_INIT_HIGH, "i2c-scl"); i2c_get_gpios_for_recovery()
|