1/* 2 * Driver for M-5MOLS 8M Pixel camera sensor with ISP 3 * 4 * Copyright (C) 2011 Samsung Electronics Co., Ltd. 5 * Author: HeungJun Kim <riverful.kim@samsung.com> 6 * 7 * Copyright (C) 2009 Samsung Electronics Co., Ltd. 8 * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 */ 15 16#include <linux/i2c.h> 17#include <linux/slab.h> 18#include <linux/irq.h> 19#include <linux/interrupt.h> 20#include <linux/delay.h> 21#include <linux/gpio.h> 22#include <linux/regulator/consumer.h> 23#include <linux/videodev2.h> 24#include <linux/module.h> 25#include <media/v4l2-ctrls.h> 26#include <media/v4l2-device.h> 27#include <media/v4l2-subdev.h> 28#include <media/m5mols.h> 29 30#include "m5mols.h" 31#include "m5mols_reg.h" 32 33int m5mols_debug; 34module_param(m5mols_debug, int, 0644); 35 36#define MODULE_NAME "M5MOLS" 37#define M5MOLS_I2C_CHECK_RETRY 500 38 39/* The regulator consumer names for external voltage regulators */ 40static struct regulator_bulk_data supplies[] = { 41 { 42 .supply = "core", /* ARM core power, 1.2V */ 43 }, { 44 .supply = "dig_18", /* digital power 1, 1.8V */ 45 }, { 46 .supply = "d_sensor", /* sensor power 1, 1.8V */ 47 }, { 48 .supply = "dig_28", /* digital power 2, 2.8V */ 49 }, { 50 .supply = "a_sensor", /* analog power */ 51 }, { 52 .supply = "dig_12", /* digital power 3, 1.2V */ 53 }, 54}; 55 56static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = { 57 [M5MOLS_RESTYPE_MONITOR] = { 58 .width = 1920, 59 .height = 1080, 60 .code = MEDIA_BUS_FMT_VYUY8_2X8, 61 .field = V4L2_FIELD_NONE, 62 .colorspace = V4L2_COLORSPACE_JPEG, 63 }, 64 [M5MOLS_RESTYPE_CAPTURE] = { 65 .width = 1920, 66 .height = 1080, 67 .code = MEDIA_BUS_FMT_JPEG_1X8, 68 .field = V4L2_FIELD_NONE, 69 .colorspace = V4L2_COLORSPACE_JPEG, 70 }, 71}; 72#define SIZE_DEFAULT_FFMT ARRAY_SIZE(m5mols_default_ffmt) 73 74static const struct m5mols_resolution m5mols_reg_res[] = { 75 { 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 }, /* SUB-QCIF */ 76 { 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 }, /* QQVGA */ 77 { 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 }, /* QCIF */ 78 { 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 }, 79 { 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 }, /* QVGA */ 80 { 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 }, /* QVGA */ 81 { 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 }, /* WQVGA */ 82 { 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 }, /* WQVGA */ 83 { 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 }, /* CIF */ 84 { 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 }, 85 { 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 }, /* qHD */ 86 { 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 }, /* VGA */ 87 { 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 }, 88 { 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 }, /* WVGA */ 89 { 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 }, /* SVGA */ 90 { 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 }, /* HD */ 91 { 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 }, /* 1080p */ 92 { 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 }, /* 2.63fps 8M */ 93 { 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 }, /* AHS_MON debug */ 94 95 { 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 }, /* QVGA */ 96 { 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 }, /* WQVGA */ 97 { 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 }, 98 { 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 }, /* qHD */ 99 { 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 }, /* VGA */ 100 { 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 }, /* WVGA */ 101 { 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 }, /* HD */ 102 { 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 }, /* 1M */ 103 { 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 }, /* 2M */ 104 { 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 }, /* Full-HD */ 105 { 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 }, /* 3Mega */ 106 { 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 }, 107 { 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 }, /* 4Mega */ 108 { 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 }, 109 { 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 }, /* 5Mega */ 110 { 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 }, /* 6Mega */ 111 { 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 }, 112 { 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 }, /* 8Mega */ 113}; 114 115/** 116 * m5mols_swap_byte - an byte array to integer conversion function 117 * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet 118 * 119 * Convert I2C data byte array with performing any required byte 120 * reordering to assure proper values for each data type, regardless 121 * of the architecture endianness. 122 */ 123static u32 m5mols_swap_byte(u8 *data, u8 length) 124{ 125 if (length == 1) 126 return *data; 127 else if (length == 2) 128 return be16_to_cpu(*((__be16 *)data)); 129 else 130 return be32_to_cpu(*((__be32 *)data)); 131} 132 133/** 134 * m5mols_read - I2C read function 135 * @reg: combination of size, category and command for the I2C packet 136 * @size: desired size of I2C packet 137 * @val: read value 138 * 139 * Returns 0 on success, or else negative errno. 140 */ 141static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val) 142{ 143 struct i2c_client *client = v4l2_get_subdevdata(sd); 144 struct m5mols_info *info = to_m5mols(sd); 145 u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; 146 u8 category = I2C_CATEGORY(reg); 147 u8 cmd = I2C_COMMAND(reg); 148 struct i2c_msg msg[2]; 149 u8 wbuf[5]; 150 int ret; 151 152 if (!client->adapter) 153 return -ENODEV; 154 155 msg[0].addr = client->addr; 156 msg[0].flags = 0; 157 msg[0].len = 5; 158 msg[0].buf = wbuf; 159 wbuf[0] = 5; 160 wbuf[1] = M5MOLS_BYTE_READ; 161 wbuf[2] = category; 162 wbuf[3] = cmd; 163 wbuf[4] = size; 164 165 msg[1].addr = client->addr; 166 msg[1].flags = I2C_M_RD; 167 msg[1].len = size + 1; 168 msg[1].buf = rbuf; 169 170 /* minimum stabilization time */ 171 usleep_range(200, 200); 172 173 ret = i2c_transfer(client->adapter, msg, 2); 174 175 if (ret == 2) { 176 *val = m5mols_swap_byte(&rbuf[1], size); 177 return 0; 178 } 179 180 if (info->isp_ready) 181 v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n", 182 size, category, cmd, ret); 183 184 return ret < 0 ? ret : -EIO; 185} 186 187int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val) 188{ 189 u32 val_32; 190 int ret; 191 192 if (I2C_SIZE(reg) != 1) { 193 v4l2_err(sd, "Wrong data size\n"); 194 return -EINVAL; 195 } 196 197 ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); 198 if (ret) 199 return ret; 200 201 *val = (u8)val_32; 202 return ret; 203} 204 205int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val) 206{ 207 u32 val_32; 208 int ret; 209 210 if (I2C_SIZE(reg) != 2) { 211 v4l2_err(sd, "Wrong data size\n"); 212 return -EINVAL; 213 } 214 215 ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); 216 if (ret) 217 return ret; 218 219 *val = (u16)val_32; 220 return ret; 221} 222 223int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val) 224{ 225 if (I2C_SIZE(reg) != 4) { 226 v4l2_err(sd, "Wrong data size\n"); 227 return -EINVAL; 228 } 229 230 return m5mols_read(sd, I2C_SIZE(reg), reg, val); 231} 232 233/** 234 * m5mols_write - I2C command write function 235 * @reg: combination of size, category and command for the I2C packet 236 * @val: value to write 237 * 238 * Returns 0 on success, or else negative errno. 239 */ 240int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) 241{ 242 struct i2c_client *client = v4l2_get_subdevdata(sd); 243 struct m5mols_info *info = to_m5mols(sd); 244 u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4]; 245 u8 category = I2C_CATEGORY(reg); 246 u8 cmd = I2C_COMMAND(reg); 247 u8 size = I2C_SIZE(reg); 248 u32 *buf = (u32 *)&wbuf[4]; 249 struct i2c_msg msg[1]; 250 int ret; 251 252 if (!client->adapter) 253 return -ENODEV; 254 255 if (size != 1 && size != 2 && size != 4) { 256 v4l2_err(sd, "Wrong data size\n"); 257 return -EINVAL; 258 } 259 260 msg->addr = client->addr; 261 msg->flags = 0; 262 msg->len = (u16)size + 4; 263 msg->buf = wbuf; 264 wbuf[0] = size + 4; 265 wbuf[1] = M5MOLS_BYTE_WRITE; 266 wbuf[2] = category; 267 wbuf[3] = cmd; 268 269 *buf = m5mols_swap_byte((u8 *)&val, size); 270 271 usleep_range(200, 200); 272 273 ret = i2c_transfer(client->adapter, msg, 1); 274 if (ret == 1) 275 return 0; 276 277 if (info->isp_ready) 278 v4l2_err(sd, "write failed: cat:%02x cmd:%02x ret:%d\n", 279 category, cmd, ret); 280 281 return ret < 0 ? ret : -EIO; 282} 283 284/** 285 * m5mols_busy_wait - Busy waiting with I2C register polling 286 * @reg: the I2C_REG() address of an 8-bit status register to check 287 * @value: expected status register value 288 * @mask: bit mask for the read status register value 289 * @timeout: timeout in miliseconds, or -1 for default timeout 290 * 291 * The @reg register value is ORed with @mask before comparing with @value. 292 * 293 * Return: 0 if the requested condition became true within less than 294 * @timeout ms, or else negative errno. 295 */ 296int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, 297 int timeout) 298{ 299 int ms = timeout < 0 ? M5MOLS_BUSY_WAIT_DEF_TIMEOUT : timeout; 300 unsigned long end = jiffies + msecs_to_jiffies(ms); 301 u8 status; 302 303 do { 304 int ret = m5mols_read_u8(sd, reg, &status); 305 306 if (ret < 0 && !(mask & M5MOLS_I2C_RDY_WAIT_FL)) 307 return ret; 308 if (!ret && (status & mask & 0xff) == (value & 0xff)) 309 return 0; 310 usleep_range(100, 250); 311 } while (ms > 0 && time_is_after_jiffies(end)); 312 313 return -EBUSY; 314} 315 316/** 317 * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts 318 * 319 * Before writing desired interrupt value the INT_FACTOR register should 320 * be read to clear pending interrupts. 321 */ 322int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg) 323{ 324 struct m5mols_info *info = to_m5mols(sd); 325 u8 mask = is_available_af(info) ? REG_INT_AF : 0; 326 u8 dummy; 327 int ret; 328 329 ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy); 330 if (!ret) 331 ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); 332 return ret; 333} 334 335int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout) 336{ 337 struct m5mols_info *info = to_m5mols(sd); 338 339 int ret = wait_event_interruptible_timeout(info->irq_waitq, 340 atomic_add_unless(&info->irq_done, -1, 0), 341 msecs_to_jiffies(timeout)); 342 if (ret <= 0) 343 return ret ? ret : -ETIMEDOUT; 344 345 return m5mols_busy_wait(sd, SYSTEM_INT_FACTOR, irq_mask, 346 M5MOLS_I2C_RDY_WAIT_FL | irq_mask, -1); 347} 348 349/** 350 * m5mols_reg_mode - Write the mode and check busy status 351 * 352 * It always accompanies a little delay changing the M-5MOLS mode, so it is 353 * needed checking current busy status to guarantee right mode. 354 */ 355static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) 356{ 357 int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); 358 if (ret < 0) 359 return ret; 360 return m5mols_busy_wait(sd, SYSTEM_SYSMODE, mode, 0xff, 361 M5MOLS_MODE_CHANGE_TIMEOUT); 362} 363 364/** 365 * m5mols_set_mode - set the M-5MOLS controller mode 366 * @mode: the required operation mode 367 * 368 * The commands of M-5MOLS are grouped into specific modes. Each functionality 369 * can be guaranteed only when the sensor is operating in mode which a command 370 * belongs to. 371 */ 372int m5mols_set_mode(struct m5mols_info *info, u8 mode) 373{ 374 struct v4l2_subdev *sd = &info->sd; 375 int ret = -EINVAL; 376 u8 reg; 377 378 if (mode < REG_PARAMETER || mode > REG_CAPTURE) 379 return ret; 380 381 ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); 382 if (ret || reg == mode) 383 return ret; 384 385 switch (reg) { 386 case REG_PARAMETER: 387 ret = m5mols_reg_mode(sd, REG_MONITOR); 388 if (mode == REG_MONITOR) 389 break; 390 if (!ret) 391 ret = m5mols_reg_mode(sd, REG_CAPTURE); 392 break; 393 394 case REG_MONITOR: 395 if (mode == REG_PARAMETER) { 396 ret = m5mols_reg_mode(sd, REG_PARAMETER); 397 break; 398 } 399 400 ret = m5mols_reg_mode(sd, REG_CAPTURE); 401 break; 402 403 case REG_CAPTURE: 404 ret = m5mols_reg_mode(sd, REG_MONITOR); 405 if (mode == REG_MONITOR) 406 break; 407 if (!ret) 408 ret = m5mols_reg_mode(sd, REG_PARAMETER); 409 break; 410 411 default: 412 v4l2_warn(sd, "Wrong mode: %d\n", mode); 413 } 414 415 if (!ret) 416 info->mode = mode; 417 418 return ret; 419} 420 421/** 422 * m5mols_get_version - retrieve full revisions information of M-5MOLS 423 * 424 * The version information includes revisions of hardware and firmware, 425 * AutoFocus alghorithm version and the version string. 426 */ 427static int m5mols_get_version(struct v4l2_subdev *sd) 428{ 429 struct m5mols_info *info = to_m5mols(sd); 430 struct m5mols_version *ver = &info->ver; 431 u8 *str = ver->str; 432 int i; 433 int ret; 434 435 ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer); 436 if (!ret) 437 ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project); 438 if (!ret) 439 ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw); 440 if (!ret) 441 ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw); 442 if (!ret) 443 ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param); 444 if (!ret) 445 ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb); 446 if (!ret) 447 ret = m5mols_read_u8(sd, AF_VERSION, &ver->af); 448 if (ret) 449 return ret; 450 451 for (i = 0; i < VERSION_STRING_SIZE; i++) { 452 ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]); 453 if (ret) 454 return ret; 455 } 456 457 v4l2_info(sd, "Manufacturer\t[%s]\n", 458 is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? 459 "Samsung Electro-Machanics" : 460 is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 461 "Samsung Fiber-Optics" : 462 is_manufacturer(info, REG_SAMSUNG_TECHWIN) ? 463 "Samsung Techwin" : "None"); 464 v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n", 465 info->ver.customer, info->ver.project); 466 467 if (!is_available_af(info)) 468 v4l2_info(sd, "No support Auto Focus on this firmware\n"); 469 470 return ret; 471} 472 473/** 474 * __find_restype - Lookup M-5MOLS resolution type according to pixel code 475 * @code: pixel code 476 */ 477static enum m5mols_restype __find_restype(u32 code) 478{ 479 enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR; 480 481 do { 482 if (code == m5mols_default_ffmt[type].code) 483 return type; 484 } while (type++ != SIZE_DEFAULT_FFMT); 485 486 return 0; 487} 488 489/** 490 * __find_resolution - Lookup preset and type of M-5MOLS's resolution 491 * @mf: pixel format to find/negotiate the resolution preset for 492 * @type: M-5MOLS resolution type 493 * @resolution: M-5MOLS resolution preset register value 494 * 495 * Find nearest resolution matching resolution preset and adjust mf 496 * to supported values. 497 */ 498static int __find_resolution(struct v4l2_subdev *sd, 499 struct v4l2_mbus_framefmt *mf, 500 enum m5mols_restype *type, 501 u32 *resolution) 502{ 503 const struct m5mols_resolution *fsize = &m5mols_reg_res[0]; 504 const struct m5mols_resolution *match = NULL; 505 enum m5mols_restype stype = __find_restype(mf->code); 506 int i = ARRAY_SIZE(m5mols_reg_res); 507 unsigned int min_err = ~0; 508 509 while (i--) { 510 int err; 511 if (stype == fsize->type) { 512 err = abs(fsize->width - mf->width) 513 + abs(fsize->height - mf->height); 514 515 if (err < min_err) { 516 min_err = err; 517 match = fsize; 518 } 519 } 520 fsize++; 521 } 522 if (match) { 523 mf->width = match->width; 524 mf->height = match->height; 525 *resolution = match->reg; 526 *type = stype; 527 return 0; 528 } 529 530 return -EINVAL; 531} 532 533static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info, 534 struct v4l2_subdev_pad_config *cfg, 535 enum v4l2_subdev_format_whence which, 536 enum m5mols_restype type) 537{ 538 if (which == V4L2_SUBDEV_FORMAT_TRY) 539 return cfg ? v4l2_subdev_get_try_format(&info->sd, cfg, 0) : NULL; 540 541 return &info->ffmt[type]; 542} 543 544static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, 545 struct v4l2_subdev_format *fmt) 546{ 547 struct m5mols_info *info = to_m5mols(sd); 548 struct v4l2_mbus_framefmt *format; 549 int ret = 0; 550 551 mutex_lock(&info->lock); 552 553 format = __find_format(info, cfg, fmt->which, info->res_type); 554 if (format) 555 fmt->format = *format; 556 else 557 ret = -EINVAL; 558 559 mutex_unlock(&info->lock); 560 return ret; 561} 562 563static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, 564 struct v4l2_subdev_format *fmt) 565{ 566 struct m5mols_info *info = to_m5mols(sd); 567 struct v4l2_mbus_framefmt *format = &fmt->format; 568 struct v4l2_mbus_framefmt *sfmt; 569 enum m5mols_restype type; 570 u32 resolution = 0; 571 int ret; 572 573 ret = __find_resolution(sd, format, &type, &resolution); 574 if (ret < 0) 575 return ret; 576 577 sfmt = __find_format(info, cfg, fmt->which, type); 578 if (!sfmt) 579 return 0; 580 581 mutex_lock(&info->lock); 582 583 format->code = m5mols_default_ffmt[type].code; 584 format->colorspace = V4L2_COLORSPACE_JPEG; 585 format->field = V4L2_FIELD_NONE; 586 587 if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { 588 *sfmt = *format; 589 info->resolution = resolution; 590 info->res_type = type; 591 } 592 593 mutex_unlock(&info->lock); 594 return ret; 595} 596 597static int m5mols_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, 598 struct v4l2_mbus_frame_desc *fd) 599{ 600 struct m5mols_info *info = to_m5mols(sd); 601 602 if (pad != 0 || fd == NULL) 603 return -EINVAL; 604 605 mutex_lock(&info->lock); 606 /* 607 * .get_frame_desc is only used for compressed formats, 608 * thus we always return the capture frame parameters here. 609 */ 610 fd->entry[0].length = info->cap.buf_size; 611 fd->entry[0].pixelcode = info->ffmt[M5MOLS_RESTYPE_CAPTURE].code; 612 mutex_unlock(&info->lock); 613 614 fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; 615 fd->num_entries = 1; 616 617 return 0; 618} 619 620static int m5mols_set_frame_desc(struct v4l2_subdev *sd, unsigned int pad, 621 struct v4l2_mbus_frame_desc *fd) 622{ 623 struct m5mols_info *info = to_m5mols(sd); 624 struct v4l2_mbus_framefmt *mf = &info->ffmt[M5MOLS_RESTYPE_CAPTURE]; 625 626 if (pad != 0 || fd == NULL) 627 return -EINVAL; 628 629 fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; 630 fd->num_entries = 1; 631 fd->entry[0].length = clamp_t(u32, fd->entry[0].length, 632 mf->width * mf->height, 633 M5MOLS_MAIN_JPEG_SIZE_MAX); 634 mutex_lock(&info->lock); 635 info->cap.buf_size = fd->entry[0].length; 636 mutex_unlock(&info->lock); 637 638 return 0; 639} 640 641 642static int m5mols_enum_mbus_code(struct v4l2_subdev *sd, 643 struct v4l2_subdev_pad_config *cfg, 644 struct v4l2_subdev_mbus_code_enum *code) 645{ 646 if (!code || code->index >= SIZE_DEFAULT_FFMT) 647 return -EINVAL; 648 649 code->code = m5mols_default_ffmt[code->index].code; 650 651 return 0; 652} 653 654static struct v4l2_subdev_pad_ops m5mols_pad_ops = { 655 .enum_mbus_code = m5mols_enum_mbus_code, 656 .get_fmt = m5mols_get_fmt, 657 .set_fmt = m5mols_set_fmt, 658 .get_frame_desc = m5mols_get_frame_desc, 659 .set_frame_desc = m5mols_set_frame_desc, 660}; 661 662/** 663 * m5mols_restore_controls - Apply current control values to the registers 664 * 665 * m5mols_do_scenemode() handles all parameters for which there is yet no 666 * individual control. It should be replaced at some point by setting each 667 * control individually, in required register set up order. 668 */ 669int m5mols_restore_controls(struct m5mols_info *info) 670{ 671 int ret; 672 673 if (info->ctrl_sync) 674 return 0; 675 676 ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL); 677 if (ret) 678 return ret; 679 680 ret = v4l2_ctrl_handler_setup(&info->handle); 681 info->ctrl_sync = !ret; 682 683 return ret; 684} 685 686/** 687 * m5mols_start_monitor - Start the monitor mode 688 * 689 * Before applying the controls setup the resolution and frame rate 690 * in PARAMETER mode, and then switch over to MONITOR mode. 691 */ 692static int m5mols_start_monitor(struct m5mols_info *info) 693{ 694 struct v4l2_subdev *sd = &info->sd; 695 int ret; 696 697 ret = m5mols_set_mode(info, REG_PARAMETER); 698 if (!ret) 699 ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution); 700 if (!ret) 701 ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30); 702 if (!ret) 703 ret = m5mols_set_mode(info, REG_MONITOR); 704 if (!ret) 705 ret = m5mols_restore_controls(info); 706 707 return ret; 708} 709 710static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) 711{ 712 struct m5mols_info *info = to_m5mols(sd); 713 u32 code; 714 int ret; 715 716 mutex_lock(&info->lock); 717 code = info->ffmt[info->res_type].code; 718 719 if (enable) { 720 if (is_code(code, M5MOLS_RESTYPE_MONITOR)) 721 ret = m5mols_start_monitor(info); 722 else if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) 723 ret = m5mols_start_capture(info); 724 else 725 ret = -EINVAL; 726 } else { 727 ret = m5mols_set_mode(info, REG_PARAMETER); 728 } 729 730 mutex_unlock(&info->lock); 731 return ret; 732} 733 734static const struct v4l2_subdev_video_ops m5mols_video_ops = { 735 .s_stream = m5mols_s_stream, 736}; 737 738static int m5mols_sensor_power(struct m5mols_info *info, bool enable) 739{ 740 struct v4l2_subdev *sd = &info->sd; 741 struct i2c_client *client = v4l2_get_subdevdata(sd); 742 const struct m5mols_platform_data *pdata = info->pdata; 743 int ret; 744 745 if (info->power == enable) 746 return 0; 747 748 if (enable) { 749 if (info->set_power) { 750 ret = info->set_power(&client->dev, 1); 751 if (ret) 752 return ret; 753 } 754 755 ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); 756 if (ret) { 757 info->set_power(&client->dev, 0); 758 return ret; 759 } 760 761 gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity); 762 info->power = 1; 763 764 return ret; 765 } 766 767 ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); 768 if (ret) 769 return ret; 770 771 if (info->set_power) 772 info->set_power(&client->dev, 0); 773 774 gpio_set_value(pdata->gpio_reset, pdata->reset_polarity); 775 776 info->isp_ready = 0; 777 info->power = 0; 778 779 return ret; 780} 781 782/* m5mols_update_fw - optional firmware update routine */ 783int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd, 784 int (*set_power)(struct m5mols_info *, bool)) 785{ 786 return 0; 787} 788 789/** 790 * m5mols_fw_start - M-5MOLS internal ARM controller initialization 791 * 792 * Execute the M-5MOLS internal ARM controller initialization sequence. 793 * This function should be called after the supply voltage has been 794 * applied and before any requests to the device are made. 795 */ 796static int m5mols_fw_start(struct v4l2_subdev *sd) 797{ 798 struct m5mols_info *info = to_m5mols(sd); 799 int ret; 800 801 atomic_set(&info->irq_done, 0); 802 /* Wait until I2C slave is initialized in Flash Writer mode */ 803 ret = m5mols_busy_wait(sd, FLASH_CAM_START, REG_IN_FLASH_MODE, 804 M5MOLS_I2C_RDY_WAIT_FL | 0xff, -1); 805 if (!ret) 806 ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT); 807 if (!ret) 808 ret = m5mols_wait_interrupt(sd, REG_INT_MODE, 2000); 809 if (ret < 0) 810 return ret; 811 812 info->isp_ready = 1; 813 814 ret = m5mols_get_version(sd); 815 if (!ret) 816 ret = m5mols_update_fw(sd, m5mols_sensor_power); 817 if (ret) 818 return ret; 819 820 v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n"); 821 822 ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI); 823 if (!ret) 824 ret = m5mols_enable_interrupt(sd, 825 REG_INT_AF | REG_INT_CAPTURE); 826 827 return ret; 828} 829 830/* Execute the lens soft-landing algorithm */ 831static int m5mols_auto_focus_stop(struct m5mols_info *info) 832{ 833 int ret; 834 835 ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); 836 if (!ret) 837 ret = m5mols_write(&info->sd, AF_MODE, REG_AF_POWEROFF); 838 if (!ret) 839 ret = m5mols_busy_wait(&info->sd, SYSTEM_STATUS, REG_AF_IDLE, 840 0xff, -1); 841 return ret; 842} 843 844/** 845 * m5mols_s_power - Main sensor power control function 846 * 847 * To prevent breaking the lens when the sensor is powered off the Soft-Landing 848 * algorithm is called where available. The Soft-Landing algorithm availability 849 * dependends on the firmware provider. 850 */ 851static int m5mols_s_power(struct v4l2_subdev *sd, int on) 852{ 853 struct m5mols_info *info = to_m5mols(sd); 854 int ret; 855 856 mutex_lock(&info->lock); 857 858 if (on) { 859 ret = m5mols_sensor_power(info, true); 860 if (!ret) 861 ret = m5mols_fw_start(sd); 862 } else { 863 if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { 864 ret = m5mols_set_mode(info, REG_MONITOR); 865 if (!ret) 866 ret = m5mols_auto_focus_stop(info); 867 if (ret < 0) 868 v4l2_warn(sd, "Soft landing lens failed\n"); 869 } 870 ret = m5mols_sensor_power(info, false); 871 872 info->ctrl_sync = 0; 873 } 874 875 mutex_unlock(&info->lock); 876 return ret; 877} 878 879static int m5mols_log_status(struct v4l2_subdev *sd) 880{ 881 struct m5mols_info *info = to_m5mols(sd); 882 883 v4l2_ctrl_handler_log_status(&info->handle, sd->name); 884 885 return 0; 886} 887 888static const struct v4l2_subdev_core_ops m5mols_core_ops = { 889 .s_power = m5mols_s_power, 890 .log_status = m5mols_log_status, 891}; 892 893/* 894 * V4L2 subdev internal operations 895 */ 896static int m5mols_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 897{ 898 struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(sd, fh->pad, 0); 899 900 *format = m5mols_default_ffmt[0]; 901 return 0; 902} 903 904static const struct v4l2_subdev_internal_ops m5mols_subdev_internal_ops = { 905 .open = m5mols_open, 906}; 907 908static const struct v4l2_subdev_ops m5mols_ops = { 909 .core = &m5mols_core_ops, 910 .pad = &m5mols_pad_ops, 911 .video = &m5mols_video_ops, 912}; 913 914static irqreturn_t m5mols_irq_handler(int irq, void *data) 915{ 916 struct m5mols_info *info = to_m5mols(data); 917 918 atomic_set(&info->irq_done, 1); 919 wake_up_interruptible(&info->irq_waitq); 920 921 return IRQ_HANDLED; 922} 923 924static int m5mols_probe(struct i2c_client *client, 925 const struct i2c_device_id *id) 926{ 927 const struct m5mols_platform_data *pdata = client->dev.platform_data; 928 unsigned long gpio_flags; 929 struct m5mols_info *info; 930 struct v4l2_subdev *sd; 931 int ret; 932 933 if (pdata == NULL) { 934 dev_err(&client->dev, "No platform data\n"); 935 return -EINVAL; 936 } 937 938 if (!gpio_is_valid(pdata->gpio_reset)) { 939 dev_err(&client->dev, "No valid RESET GPIO specified\n"); 940 return -EINVAL; 941 } 942 943 if (!client->irq) { 944 dev_err(&client->dev, "Interrupt not assigned\n"); 945 return -EINVAL; 946 } 947 948 info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); 949 if (!info) 950 return -ENOMEM; 951 952 info->pdata = pdata; 953 info->set_power = pdata->set_power; 954 955 gpio_flags = pdata->reset_polarity 956 ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; 957 ret = devm_gpio_request_one(&client->dev, pdata->gpio_reset, gpio_flags, 958 "M5MOLS_NRST"); 959 if (ret) { 960 dev_err(&client->dev, "Failed to request gpio: %d\n", ret); 961 return ret; 962 } 963 964 ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), 965 supplies); 966 if (ret) { 967 dev_err(&client->dev, "Failed to get regulators: %d\n", ret); 968 return ret; 969 } 970 971 sd = &info->sd; 972 v4l2_i2c_subdev_init(sd, client, &m5mols_ops); 973 strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); 974 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 975 976 sd->internal_ops = &m5mols_subdev_internal_ops; 977 info->pad.flags = MEDIA_PAD_FL_SOURCE; 978 ret = media_entity_init(&sd->entity, 1, &info->pad, 0); 979 if (ret < 0) 980 return ret; 981 sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; 982 983 init_waitqueue_head(&info->irq_waitq); 984 mutex_init(&info->lock); 985 986 ret = devm_request_irq(&client->dev, client->irq, m5mols_irq_handler, 987 IRQF_TRIGGER_RISING, MODULE_NAME, sd); 988 if (ret) { 989 dev_err(&client->dev, "Interrupt request failed: %d\n", ret); 990 goto error; 991 } 992 info->res_type = M5MOLS_RESTYPE_MONITOR; 993 info->ffmt[0] = m5mols_default_ffmt[0]; 994 info->ffmt[1] = m5mols_default_ffmt[1]; 995 996 ret = m5mols_sensor_power(info, true); 997 if (ret) 998 goto error; 999 1000 ret = m5mols_fw_start(sd); 1001 if (!ret) 1002 ret = m5mols_init_controls(sd); 1003 1004 ret = m5mols_sensor_power(info, false); 1005 if (!ret) 1006 return 0; 1007error: 1008 media_entity_cleanup(&sd->entity); 1009 return ret; 1010} 1011 1012static int m5mols_remove(struct i2c_client *client) 1013{ 1014 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1015 1016 v4l2_device_unregister_subdev(sd); 1017 v4l2_ctrl_handler_free(sd->ctrl_handler); 1018 media_entity_cleanup(&sd->entity); 1019 1020 return 0; 1021} 1022 1023static const struct i2c_device_id m5mols_id[] = { 1024 { MODULE_NAME, 0 }, 1025 { }, 1026}; 1027MODULE_DEVICE_TABLE(i2c, m5mols_id); 1028 1029static struct i2c_driver m5mols_i2c_driver = { 1030 .driver = { 1031 .name = MODULE_NAME, 1032 }, 1033 .probe = m5mols_probe, 1034 .remove = m5mols_remove, 1035 .id_table = m5mols_id, 1036}; 1037 1038module_i2c_driver(m5mols_i2c_driver); 1039 1040MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); 1041MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>"); 1042MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver"); 1043MODULE_LICENSE("GPL"); 1044