1/*
2 *  linux/arch/arm/mach-clps711x/autcpu12.c
3 *
4 * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
19 */
20#include <linux/kernel.h>
21#include <linux/init.h>
22#include <linux/types.h>
23#include <linux/string.h>
24#include <linux/mm.h>
25#include <linux/io.h>
26#include <linux/gpio.h>
27#include <linux/ioport.h>
28#include <linux/interrupt.h>
29#include <linux/mtd/physmap.h>
30#include <linux/mtd/plat-ram.h>
31#include <linux/mtd/partitions.h>
32#include <linux/mtd/nand-gpio.h>
33#include <linux/platform_device.h>
34#include <linux/basic_mmio_gpio.h>
35
36#include <mach/hardware.h>
37#include <asm/sizes.h>
38#include <asm/setup.h>
39#include <asm/mach-types.h>
40#include <asm/mach/arch.h>
41#include <asm/pgtable.h>
42#include <asm/page.h>
43
44#include <asm/mach/map.h>
45
46#include "common.h"
47#include "devices.h"
48
49/* NOR flash */
50#define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
51
52/* Board specific hardware definitions */
53#define AUTCPU12_CHAR_LCD_BASE	(CS1_PHYS_BASE + 0x00000000)
54#define AUTCPU12_CSAUX1_BASE	(CS1_PHYS_BASE + 0x04000000)
55#define AUTCPU12_CAN_BASE	(CS1_PHYS_BASE + 0x08000000)
56#define AUTCPU12_TOUCH_BASE	(CS1_PHYS_BASE + 0x0a000000)
57#define AUTCPU12_IO_BASE	(CS1_PHYS_BASE + 0x0c000000)
58#define AUTCPU12_LPT_BASE	(CS1_PHYS_BASE + 0x0e000000)
59
60/* NVRAM */
61#define AUTCPU12_NVRAM_BASE	(CS1_PHYS_BASE + 0x02000000)
62
63/* SmartMedia flash */
64#define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
65#define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
66
67/* Ethernet */
68#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
69#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
70
71/* NAND flash */
72#define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
73#define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
74#define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
75#define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
76#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 4)
77
78/* LCD contrast digital potentiometer */
79#define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
80#define AUTCPU12_DPOT_CLK	CLPS711X_GPIO(4, 1)
81#define AUTCPU12_DPOT_UD	CLPS711X_GPIO(4, 2)
82
83static struct resource autcpu12_cs8900_resource[] __initdata = {
84	DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K),
85	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
86};
87
88static struct resource autcpu12_nand_resource[] __initdata = {
89	DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16),
90};
91
92static struct mtd_partition autcpu12_nand_parts[] __initdata = {
93	{
94		.name	= "Flash partition 1",
95		.offset	= 0,
96		.size	= SZ_8M,
97	},
98	{
99		.name	= "Flash partition 2",
100		.offset	= MTDPART_OFS_APPEND,
101		.size	= MTDPART_SIZ_FULL,
102	},
103};
104
105static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata,
106					 size_t sz)
107{
108	switch (sz) {
109	case SZ_16M:
110	case SZ_32M:
111		break;
112	case SZ_64M:
113	case SZ_128M:
114		pdata->parts[0].size = SZ_16M;
115		break;
116	default:
117		pr_warn("Unsupported SmartMedia device size %u\n", sz);
118		break;
119	}
120}
121
122static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = {
123	.gpio_rdy	= AUTCPU12_SMC_RDY,
124	.gpio_nce	= AUTCPU12_SMC_NCE,
125	.gpio_ale	= AUTCPU12_SMC_ALE,
126	.gpio_cle	= AUTCPU12_SMC_CLE,
127	.gpio_nwp	= -1,
128	.chip_delay	= 20,
129	.parts		= autcpu12_nand_parts,
130	.num_parts	= ARRAY_SIZE(autcpu12_nand_parts),
131	.adjust_parts	= autcpu12_adjust_parts,
132};
133
134static struct platform_device autcpu12_nand_pdev __initdata = {
135	.name		= "gpio-nand",
136	.id		= -1,
137	.resource	= autcpu12_nand_resource,
138	.num_resources	= ARRAY_SIZE(autcpu12_nand_resource),
139	.dev		= {
140		.platform_data = &autcpu12_nand_pdata,
141	},
142};
143
144static struct resource autcpu12_mmgpio_resource[] __initdata = {
145	DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"),
146};
147
148static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = {
149	.base	= AUTCPU12_MMGPIO_BASE,
150	.ngpio	= 8,
151};
152
153static struct platform_device autcpu12_mmgpio_pdev __initdata = {
154	.name		= "basic-mmio-gpio",
155	.id		= -1,
156	.resource	= autcpu12_mmgpio_resource,
157	.num_resources	= ARRAY_SIZE(autcpu12_mmgpio_resource),
158	.dev		= {
159		.platform_data = &autcpu12_mmgpio_pdata,
160	},
161};
162
163static const struct gpio autcpu12_gpios[] __initconst = {
164	{ AUTCPU12_DPOT_CS,	GPIOF_OUT_INIT_HIGH,	"DPOT CS" },
165	{ AUTCPU12_DPOT_CLK,	GPIOF_OUT_INIT_LOW,	"DPOT CLK" },
166	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
167};
168
169static struct mtd_partition autcpu12_flash_partitions[] = {
170	{
171		.name	= "NOR.0",
172		.offset	= 0,
173		.size	= MTDPART_SIZ_FULL,
174	},
175};
176
177static struct physmap_flash_data autcpu12_flash_pdata = {
178	.width		= 4,
179	.parts		= autcpu12_flash_partitions,
180	.nr_parts	= ARRAY_SIZE(autcpu12_flash_partitions),
181};
182
183static struct resource autcpu12_flash_resources[] __initdata = {
184	DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M),
185};
186
187static struct platform_device autcpu12_flash_pdev __initdata = {
188	.name		= "physmap-flash",
189	.id		= 0,
190	.resource	= autcpu12_flash_resources,
191	.num_resources	= ARRAY_SIZE(autcpu12_flash_resources),
192	.dev		= {
193		.platform_data	= &autcpu12_flash_pdata,
194	},
195};
196
197static struct resource autcpu12_nvram_resource[] __initdata = {
198	DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0),
199};
200
201static struct platdata_mtd_ram autcpu12_nvram_pdata = {
202	.bankwidth	= 4,
203};
204
205static struct platform_device autcpu12_nvram_pdev __initdata = {
206	.name		= "mtd-ram",
207	.id		= 0,
208	.resource	= autcpu12_nvram_resource,
209	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
210	.dev		= {
211		.platform_data	= &autcpu12_nvram_pdata,
212	},
213};
214
215static void __init autcpu12_nvram_init(void)
216{
217	void __iomem *nvram;
218	unsigned int save[2];
219	resource_size_t nvram_size = SZ_128K;
220
221	/*
222	 * Check for 32K/128K
223	 * Read ofs 0K
224	 * Read ofs 64K
225	 * Write complement to ofs 64K
226	 * Read and check result on ofs 0K
227	 * Restore contents
228	 */
229	nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K);
230	if (nvram) {
231		save[0] = readl(nvram + 0);
232		save[1] = readl(nvram + SZ_64K);
233		writel(~save[0], nvram + SZ_64K);
234		if (readl(nvram + 0) != save[0]) {
235			writel(save[0], nvram + 0);
236			nvram_size = SZ_32K;
237		} else
238			writel(save[1], nvram + SZ_64K);
239		iounmap(nvram);
240
241		autcpu12_nvram_resource[0].end =
242			autcpu12_nvram_resource[0].start + nvram_size - 1;
243		platform_device_register(&autcpu12_nvram_pdev);
244	} else
245		pr_err("Failed to remap NVRAM resource\n");
246}
247
248static void __init autcpu12_init(void)
249{
250	clps711x_devices_init();
251	platform_device_register(&autcpu12_flash_pdev);
252	platform_device_register_simple("video-clps711x", 0, NULL, 0);
253	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
254					ARRAY_SIZE(autcpu12_cs8900_resource));
255	platform_device_register(&autcpu12_mmgpio_pdev);
256	autcpu12_nvram_init();
257}
258
259static void __init autcpu12_init_late(void)
260{
261	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
262	platform_device_register(&autcpu12_nand_pdev);
263}
264
265MACHINE_START(AUTCPU12, "autronix autcpu12")
266	/* Maintainer: Thomas Gleixner */
267	.atag_offset	= 0x20000,
268	.map_io		= clps711x_map_io,
269	.init_irq	= clps711x_init_irq,
270	.init_time	= clps711x_timer_init,
271	.init_machine	= autcpu12_init,
272	.init_late	= autcpu12_init_late,
273	.restart	= clps711x_restart,
274MACHINE_END
275
276