/linux-4.1.27/Documentation/devicetree/bindings/clock/ |
D | rockchip,rk3288-cru.txt | 32 - "xin32k" - rtc clock - optional, 33 - "ext_i2s" - external I2S clock - optional, 34 - "ext_hsadc" - external HSADC clock - optional, 35 - "ext_edp_24m" - external display port clock - optional, 36 - "ext_vip" - external VIP clock - optional, 37 - "ext_isp" - external ISP clock - optional, 38 - "ext_jtag" - external JTAG clock - optional
|
D | rockchip,rk3188-cru.txt | 33 - "xin32k" - rtc clock - optional, 34 - "xin27m" - 27mhz crystal input on rk3066 - optional, 35 - "ext_hsadc" - external HSADC clock - optional, 36 - "ext_cif0" - external camera clock - optional, 37 - "ext_rmii" - external RMII clock - optional, 38 - "ext_jtag" - externalJTAG clock - optional
|
D | samsung,s3c64xx-clock.txt | 33 - "iiscdclk0" - I2S0 codec clock - optional, 34 - "iiscdclk1" - I2S1 codec clock - optional, 35 - "iiscdclk2" - I2S2 codec clock - optional, 36 - "pcmcdclk0" - PCM0 codec clock - optional, 37 - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
|
D | samsung,s3c2443-clock.txt | 31 - "ext" - external clock source - optional, 32 - "ext_i2s" - external I2S clock - optional, 33 - "ext_uart" - external uart clock - optional,
|
D | zynq-7000.txt | 32 The following strings are optional parameters to the 'clock-names' property in 33 order to provide an optional (E)MIO clock source. 107 # optional props
|
D | pistachio-clock.txt | 14 - "audio_clk_in": Alternate audio reference clock (optional) 15 - "enet_clk_in": Alternate ethernet PHY clock (optional) 110 - clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
|
D | samsung,s3c2412-clock.txt | 28 - "ext" - external clock source - optional,
|
D | renesas,cpg-mstp-clocks.txt | 24 The second register is the clock status register and is optional when not
|
/linux-4.1.27/net/sctp/ |
D | Kconfig | 27 -- optional bundling of multiple user messages into a single SCTP 70 bool "Enable optional MD5 hmac cookie generation" 72 Enable optional MD5 hmac based SCTP cookie generation 76 bool "Enable optional SHA1 hmac cookie generation" 78 Enable optional SHA1 hmac based SCTP cookie generation 89 bool "Enable optional MD5 hmac cookie generation" 91 Enable optional MD5 hmac based SCTP cookie generation 96 bool "Enable optional SHA1 hmac cookie generation" 98 Enable optional SHA1 hmac based SCTP cookie generation
|
/linux-4.1.27/Documentation/devicetree/bindings/pinctrl/ |
D | qcom,pmic-gpio.txt | 99 Usage: optional 104 Usage: optional 109 Usage: optional 114 Usage: optional 127 Usage: optional 132 Usage: optional 137 Usage: optional 143 Usage: optional 149 Usage: optional 156 Usage: optional [all …]
|
D | qcom,pmic-mpp.txt | 88 Usage: optional 93 Usage: optional 102 Usage: optional 107 Usage: optional 113 Usage: optional 119 Usage: optional 125 Usage: optional 131 Usage: optional 138 Usage: optional
|
D | qcom,apq8084-pinctrl.txt | 115 Usage: optional 120 Usage: optional 125 Usage: optional 130 Usage: optional 137 Usage: optional 144 Usage: optional
|
D | qcom,msm8960-pinctrl.txt | 117 Usage: optional 122 Usage: optional 127 Usage: optional 132 Usage: optional 139 Usage: optional 146 Usage: optional
|
D | qcom,msm8916-pinctrl.txt | 123 Usage: optional 128 Usage: optional 133 Usage: optional 138 Usage: optional 145 Usage: optional 152 Usage: optional
|
/linux-4.1.27/Documentation/hwmon/ |
D | lineage-pem | 59 in2_input Input voltage (mV, optional) 62 curr1_input Input current (mA, optional) 65 power1_input Input power (uW, optional) 68 fan1_input Fan 1 speed (rpm, optional) 69 fan2_input Fan 2 speed (rpm, optional) 70 fan3_input Fan 3 speed (rpm, optional)
|
D | ads7828 | 23 The ads7828 driver accepts an optional ads7828_platform_data structure (defined
|
/linux-4.1.27/Documentation/devicetree/bindings/spi/ |
D | spi-bus.txt | 15 - cs-gpios - (optional) gpios chip select. 50 - spi-cpol - (optional) Empty property indicating device requires 52 - spi-cpha - (optional) Empty property indicating device requires 54 - spi-cs-high - (optional) Empty property indicating device requires 56 - spi-3wire - (optional) Empty property indicating device requires 58 - spi-lsb-first - (optional) Empty property indicating device requires 60 - spi-tx-bus-width - (optional) The bus width(number of data wires) that 62 - spi-rx-bus-width - (optional) The bus width(number of data wires) that
|
D | ti_qspi.txt | 9 - (optional) qspi_ctrlmod: Control module Address space
|
/linux-4.1.27/Documentation/devicetree/bindings/leds/ |
D | leds-pwm.txt | 12 - pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device 16 - active-low : (optional) For PWMs where the LED is wired to supply 18 - label : (optional) 20 - linux,default-trigger : (optional)
|
D | leds-gpio.txt | 13 - label : (optional) 15 - linux,default-trigger : (optional) 17 - default-state: (optional) The initial state of the LED. Valid 24 - retain-state-suspended: (optional) The suspend state can be retained.Such
|
D | tca6507.txt | 16 - label : (optional) see Documentation/devicetree/bindings/leds/common.txt 18 - linux,default-trigger : (optional)
|
D | pca963x.txt | 14 - label : (optional) see Documentation/devicetree/bindings/leds/common.txt 17 - linux,default-trigger : (optional)
|
D | register-bit-led.txt | 22 - label : (optional) 24 - linux,default-trigger : (optional) 26 - default-state: (optional) The initial state of the LED. Valid
|
D | leds-lp55xx.txt | 28 - chan-name (optional): name of channel 29 - linux,default-trigger (optional): see
|
/linux-4.1.27/Documentation/devicetree/bindings/input/ |
D | qcom,pm8xxx-keypad.txt | 32 Usage: optional 37 Usage: optional 54 Usage: optional 60 Usage: optional 66 Usage: optional
|
D | qcom,pm8941-pwrkey.txt | 24 Usage: optional 30 Usage: optional
|
D | qcom,pm8xxx-pwrkey.txt | 26 Usage: optional 32 Usage: optional
|
D | brcm,bcm-keypad.txt | 51 - row-output-enabled: An optional property indicating whether the row or 55 - pull-up-enabled: An optional property indicating the Keypad scan mode. 59 subsystem (optional).
|
D | matrix-keymap.txt | 12 Properties for the number of rows and columns are optional because some
|
/linux-4.1.27/Documentation/devicetree/bindings/iio/adc/ |
D | qcom,spmi-vadc.txt | 36 Usage: optional 49 Usage: optional 57 Usage: optional 67 Usage: optional 76 Usage: optional 86 Usage: optional
|
D | qcom,spmi-iadc.txt | 22 Usage: optional 27 Usage: optional
|
/linux-4.1.27/Documentation/devicetree/bindings/reserved-memory/ |
D | reserved-memory.txt | 24 optional constraints to request a dynamically allocated block of memory. 38 alignment (optional) - length based on parent's #size-cells 40 alloc-ranges (optional) - prop-encoded-array (address, length pairs). 48 compatible (optional) - standard definition 55 no-map (optional) - empty property 60 reusable (optional) - empty property 76 memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
|
/linux-4.1.27/Documentation/devicetree/bindings/video/ |
D | sharp,ls037v7dw01.txt | 9 - enable-gpios: a GPIO spec for the optional enable pin. 11 - reset-gpios: a GPIO spec for the optional reset pin. 21 configured with external pulls, all the GPIOs are considered optional with holes
|
D | display-timing.txt | 10 optional properties: 25 optional properties: 39 All the optional properties that are not bool follow the following logic:
|
D | fsl,imx-fb.txt | 19 - fsl,dmacr: DMA Control Register value. This is optional. By default, the
|
D | exynos_hdmi.txt | 15 c) optional flags and pull up/down.
|
D | ti,dra7-dss.txt | 67 HDMI Endpoint optional properties:
|
D | ti,omap5-dss.txt | 94 HDMI Endpoint optional properties:
|
/linux-4.1.27/Documentation/devicetree/bindings/mfd/ |
D | qcom-rpm.txt | 83 Usage: optional (pm8058 only) 105 Usage: optional (pm8901 only) 135 Usage: optional (pm8921 only) 165 Usage: optional 179 Usage: optional (default if no other qcom,force-mode is specified) 192 Usage: optional 200 Usage: optional 205 Usage: optional
|
D | qcom-pm8xxx.txt | 77 Usage: optional
|
/linux-4.1.27/Documentation/devicetree/bindings/net/ |
D | fixed-link.txt | 14 * 'full-duplex' (boolean, optional), to indicate that full duplex is 16 * 'pause' (boolean, optional), to indicate that pause should be 18 * 'asym-pause' (boolean, optional), to indicate that asym_pause should
|
D | brcm,unimac-mdio.txt | 7 base register, and the second one is optional and for indirect accesses to 9 - reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
|
D | brcm,systemport.txt | 8 optional third interrupt cell for Wake-on-LAN can be specified
|
D | samsung-sxgbe.txt | 14 and 1 optional lpi interrupt.
|
D | amd-xgbe-phy.txt | 19 The following optional properties are represented by an array with each
|
D | amd-xgbe.txt | 11 listed is required and is the general device interrupt. If the optional
|
/linux-4.1.27/Documentation/device-mapper/ |
D | dm-crypt.txt | 14 Encryption cipher and an optional IV generation mode. 49 Number of optional parameters. If there are no optional parameters, 50 the optional paramaters section can be skipped or #opt_params can be zero. 53 Example of optional parameters section:
|
D | verity.txt | 67 Number of optional parameters. If there are no optional parameters, 68 the optional paramaters section can be skipped or #opt_params can be zero. 71 Example of optional parameters section:
|
D | statistics.txt | 52 An optional parameter. A name that uniquely identifies 60 An optional parameter. A word that provides auxiliary data 84 An optional parameter.
|
D | switch.txt | 81 The number of optional arguments. Currently, no optional arguments
|
/linux-4.1.27/Documentation/devicetree/bindings/gpio/ |
D | gpio_atmel.txt | 8 the second cell is used to specify optional parameters (currently 12 optional properties:
|
D | gpio-poweroff.txt | 5 install a pm_power_off handler. If the optional properties 'input' is 27 it to an output when the pm_power_off function is called. If this optional
|
D | pl061-gpio.txt | 6 second cell is used to specify optional parameters:
|
D | gpio-zevio.txt | 7 second cell is used to specify optional parameters (currently unused).
|
D | gpio-restart.txt | 6 handler. If the optional properties 'open-source' is not found, the GPIO line 29 it to when the restart is initiated. If this optional property is not
|
D | fujitsu,mb86s70-gpio.txt | 10 second cell is used to specify optional parameters:
|
D | gpio-msm.txt | 8 - second cell is used to specify optional parameters (unused)
|
D | gpio-zynq.txt | 7 - Second cell is used to specify optional
|
D | gpio_lpc32xx.txt | 16 3) optional parameters:
|
D | gpio-sx150x.txt | 17 second cell is used to specify optional parameters:
|
D | gpio-adnp.txt | 9 second cell is used to specify optional parameters:
|
D | gpio-nmk.txt | 9 The second cell is used to specify optional parameters:
|
D | abilis,tb10x-gpio.txt | 8 second cell is used to specify optional parameters:
|
D | gpio-twl4030.txt | 8 - second cell is used to specify optional parameters (unused)
|
D | nvidia,tegra20-gpio.txt | 10 second cell is used to specify optional parameters:
|
D | gpio-mm-lantiq.txt | 14 the second cell is used to specify optional parameters (currently
|
D | gpio-omap.txt | 11 - second cell is used to specify optional parameters (unused)
|
D | gpio-davinci.txt | 13 - second cell is used to specify optional parameters (unused)
|
D | gpio-stp-xway.txt | 13 the second cell is used to specify optional parameters (currently
|
D | gpio-xilinx.txt | 12 second cell is used to specify optional parameters (currently unused).
|
D | brcm,kona-gpio.txt | 22 cell is used to specify optional parameters:
|
D | gpio-tz1090.txt | 33 Bank subnode optional properties:
|
/linux-4.1.27/Documentation/devicetree/bindings/ |
D | unittest.txt | 8 All other properties are optional. 38 All other properties are optional
|
/linux-4.1.27/arch/arm/mach-s3c24xx/ |
D | mach-mini2440.c | 566 struct platform_device *optional[8]; member 593 features->optional[features->count++] = in mini2440_parse_features() 605 features->optional[features->count++] = in mini2440_parse_features() 619 features->optional[features->count++] = in mini2440_parse_features() 686 platform_add_devices(features.optional, features.count); in mini2440_init()
|
/linux-4.1.27/Documentation/devicetree/bindings/interrupt-controller/ |
D | snps,dw-apb-ictl.txt | 14 - interrupt-parent: (optional) reference specific primary interrupt controller 22 - (optional) fast interrupts start at 64.
|
/linux-4.1.27/Documentation/ptp/ |
D | ptp.txt | 76 - 2 Alarm registers (optional interrupt) 77 - 3 Periodic signals (optional interrupt) 88 - Auxiliary Slave/Master Mode Snapshot (optional interrupt) 89 - Target Time (optional interrupt)
|
/linux-4.1.27/Documentation/devicetree/bindings/powerpc/fsl/ |
D | cpus.txt | 14 Usage: optional 25 Usage: optional
|
D | dma.txt | 16 - interrupt-parent : optional, if needed for interrupt mapping 28 - interrupt-parent : optional, if needed for interrupt mapping 91 - interrupt-parent : optional, if needed for interrupt mapping 149 - interrupt-parent : optional, if needed for interrupt mapping
|
D | mpic.txt | 48 Usage: optional 61 Usage: optional 68 Usage: optional 74 Usage: optional
|
D | mpic-timer.txt | 11 timer interrupts can be used. This property is optional; without this,
|
D | srio.txt | 57 Usage: optional-but-recommended (for devices with PAMU) 75 Note: All other standard properties (see ePAPR) are allowed but are optional.
|
D | msi-pic.txt | 10 should be used. The first entry is optional; the second entry is 32 optional, without this, all the MSI interrupts can be used.
|
D | srio-rmu.txt | 26 Usage: optional-but-recommended (for devices with PAMU) 128 but are optional.
|
/linux-4.1.27/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ |
D | usb.txt | 20 USBRN, SPEED (optional), and POWER (optional).
|
/linux-4.1.27/Documentation/devicetree/bindings/arm/ |
D | arch_timer.txt | 5 physical and optional virtual timer per frame. 65 The virtual timer interrupt is optional. 68 base address is optional.
|
D | atmel-at91.txt | 121 optional properties: 126 optional at91sam9260 properties: 129 optional at91sam9rl properties: 133 optional at91sam9x5 properties:
|
D | primecell.txt | 17 pclk. Additional clocks are optional and specific to those peripherals.
|
D | cpus.txt | 188 # On ARM 32-bit systems this property is optional and 233 Usage: optional for systems that have an "enable-method" 235 While optional, it is the preferred way to get access to
|
/linux-4.1.27/Documentation/devicetree/bindings/powerpc/4xx/ |
D | emac.txt | 21 - interrupt-parent : optional, if needed for interrupt mapping 66 - phy-address : 1 cell, optional, MDIO address of the PHY. If absent, 68 - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY 80 - tah-device : 1 cell, optional. If connected to a TAH engine for 82 - tah-channel : 1 cell, optional. If appropriate, channel used on the
|
/linux-4.1.27/Documentation/i2c/busses/ |
D | i2c-ocores | 41 /* optional board info */ 57 .devices = ocores_i2c_board_info, /* optional table of devices */
|
D | i2c-parport-light | 20 * irq: optional IRQ
|
/linux-4.1.27/Documentation/devicetree/bindings/usb/ |
D | usb3503.txt | 18 - refclk: Clock used for driving REFCLK signal (optional, if not provided 23 pins (optional, if not provided, driver will not set rate of the
|
D | msm-hsusb.txt | 18 USB PHY with optional OTG: 35 reset methodology. (optional)
|
D | twlxxxx-usb.txt | 27 and VBUS interrupts. The second interrupt number is optional.
|
D | am33xx-usb.txt | 9 node and its PHY node is optional. The DMA node is also optional.
|
/linux-4.1.27/Documentation/devicetree/bindings/mmc/ |
D | tmio_mmc.txt | 8 compulsory and any optional properties, common to all SD/MMC drivers, as 10 optional bindings can be used.
|
D | sdhci-msm.txt | 19 "bus" - SDCC bus voter clock (optional)
|
D | sdhci-pxa.txt | 22 "io" for I/O clock and "core" for optional core clock.
|
D | synopsys-dw-mshc.txt | 19 connnected to the controller. The following are optional properties which 30 for write-protect, this property is optional.
|
/linux-4.1.27/Documentation/devicetree/bindings/iio/ |
D | st-sensors.txt | 12 - vdd-supply: an optional regulator that needs to be on to provide VDD 14 - vddio-supply: an optional regulator that needs to be on to provide the
|
/linux-4.1.27/scripts/ |
D | sign-file | 121 my ($cursor, $expected_tag, $optional) = @_; 124 if ($cursor->[1] == 0 && $optional); 133 if ($optional);
|
/linux-4.1.27/Documentation/ABI/testing/ |
D | sysfs-class-extcon | 27 object. If the extcon object has an optional callback 37 If the extcon object has an optional callback "show_state" 38 defined, the showing function is overridden with the optional
|
D | sysfs-driver-pciback | 9 Device.Function-Register:Size:Mask (Domain is optional).
|
D | debugfs-olpc | 12 are optional (hex) arguments.
|
/linux-4.1.27/drivers/iio/magnetometer/ |
D | Kconfig | 64 - st_magn_i2c (necessary for the I2C devices [optional*]); 65 - st_magn_spi (necessary for the SPI devices [optional*]);
|
/linux-4.1.27/Documentation/devicetree/bindings/regulator/ |
D | ti-abb-regulator.txt | 46 - reg-names: In addition to the required properties, the following are optional 103 1012500 0 0 0x40000 0 0 /* RBB optional */ 104 1200000 0 0x4 0 0x40000 0 /* FBB optional */ 130 1200000 0 0x4 0 0x40000 0x1f00 /* FBB optional, vset */
|
D | s5m8767-regulator.txt | 28 [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional 33 If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional 47 Additional properties required if either of the optional properties are used: 79 - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
|
D | tps65218.txt | 15 - Any optional property defined in bindings/regulator/regulator.txt
|
D | max8997-regulator.txt | 25 [1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional 30 If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional 44 Additional properties required if either of the optional properties are used:
|
D | pbias-regulator.txt | 15 - Any optional property defined in bindings/regulator/regulator.txt
|
D | max8925-regulator.txt | 30 - Any optional property defined in bindings/regulator/regulator.txt
|
D | isl9305.txt | 17 - Per-regulator optional properties are defined in regulator.txt
|
D | da9211.txt | 15 - Any optional property defined in regulator.txt
|
/linux-4.1.27/Documentation/devicetree/bindings/thermal/ |
D | exynos-thermal.txt | 35 -- 2. optional clock to access the shared registers of TMU channel 36 -- 3. optional special clock for functional operation 43 - vtmu-supply: This entry is optional and provides the regulator node supplying
|
/linux-4.1.27/Documentation/devicetree/bindings/pwm/ |
D | pwm.txt | 18 An optional property "pwm-names" may contain a list of strings to label 50 Example with optional PWM specifier for inverse polarity
|
/linux-4.1.27/Documentation/devicetree/bindings/power_supply/ |
D | charger-manager.txt | 15 (optional) - cm-cable-min : minimum current of cable 16 (optional) - cm-cable-max : maximum current of cable
|
/linux-4.1.27/Documentation/devicetree/bindings/arm/msm/ |
D | qcom,saw2.txt | 35 the register region. An optional second element specifies 39 Usage: optional
|
D | qcom,kpss-acc.txt | 21 the register region. An optional second element specifies
|
/linux-4.1.27/Documentation/i2c/muxes/ |
D | i2c-mux-gpio | 51 .base_nr = 2, /* optional */ 56 .idle = 4, /* optional */
|
/linux-4.1.27/Documentation/devicetree/bindings/w1/ |
D | w1-gpio.txt | 8 - the second one is optional. If specified, it is used as
|
/linux-4.1.27/Documentation/devicetree/bindings/ata/ |
D | atmel-at91_cf.txt | 8 optional and may be set to 0 if not present.
|
D | fsl-sata.txt | 19 - interrupt-parent : optional, if needed for interrupt mapping
|
D | apm-xgene.txt | 17 5th optional memory resource shall be the host
|
/linux-4.1.27/Documentation/devicetree/bindings/memory-controllers/ |
D | ingenic,jz4780-nemc.txt | 39 for all optional parameters will be configured for all banks. If any optional
|
/linux-4.1.27/Documentation/devicetree/bindings/cpufreq/ |
D | cpufreq-spear.txt | 16 Both required and optional properties listed above must be defined under node
|
D | arm_big_little_dt.txt | 7 Both required and optional properties listed below must be defined
|
D | cpufreq-dt.txt | 7 Both required and optional properties listed below must be defined
|
/linux-4.1.27/Documentation/devicetree/bindings/media/ |
D | exynos-jpeg-codec.txt | 12 - "sclk" for the special clock (optional).
|
D | samsung-s5c73m3.txt | 40 similarly specified, but it is optional since the S5C73M3 ISP and a raw image 48 - data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
|
D | samsung-s5k6a3.txt | 32 - data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
|
D | samsung-s5k5baf.txt | 34 - data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
|
D | ti,omap3isp.txt | 26 Port nodes (optional)
|
/linux-4.1.27/Documentation/devicetree/bindings/timer/ |
D | lsi,zevio-timer.txt | 15 If any of the optional properties are not given, the timer is added as a
|
/linux-4.1.27/Documentation/devicetree/bindings/sound/ |
D | alc5632.txt | 14 second cell is used to specify optional parameters (currently unused).
|
D | wm8994.txt | 15 second cell is used to specify optional parameters (currently unused). 24 connected to. This is optional, if it is not connected then none
|
D | imx-audmux.txt | 13 Required properties of optional child nodes:
|
D | tlv320aic32x4.txt | 13 If you supply ldoin, dv and av are optional. Otherwise they are required
|
D | mvebu-audio.txt | 20 The second one is optional and defines an external clock.
|
D | wm8903.txt | 14 second cell is used to specify optional parameters (currently unused).
|
D | rt5677.txt | 16 second cell is used to specify optional parameters (currently unused).
|
/linux-4.1.27/Documentation/ |
D | DMA-attributes.txt | 31 Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING, 41 Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE, 67 Since it is optional for platforms to implement
|
/linux-4.1.27/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/ |
D | serial.txt | 16 The gpios property is optional and can be left out when control lines are
|
D | gpio.txt | 14 second cell is used to specify optional parameters (currently unused).
|
/linux-4.1.27/Documentation/filesystems/nfs/ |
D | Exporting | 109 encode_fh (optional) 120 fh_to_parent (optional but strongly recommended) 125 get_parent (optional but strongly recommended) 133 get_name (optional)
|
D | nfs41-server.txt | 28 the operations that are mandatory to implement (REQ), optional 41 NS* Unimplemented optional feature. 165 * no support for dynamic slot table renegotiation (optional)
|
/linux-4.1.27/Documentation/devicetree/bindings/mtd/ |
D | mtd-physmap.txt | 14 - device-width : (optional) Width of a single mtd chip. If 40 additional (optional) property is defined:
|
D | gpmc-onenand.txt | 20 For inline partition table parsing (optional):
|
D | atmel-nand.txt | 9 The PMECC lookup table address and size in ROM is optional. If not 17 optional gpio and may be set to 0 if not present.
|
D | pxa3xx-nand.txt | 41 /* partitions (optional) */
|
D | fsl-upm-nand.txt | 15 - gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
|
D | gpio-control-nand.txt | 15 GPIO references is: RDY, nCE, ALE, CLE, and an optional nWP.
|
/linux-4.1.27/drivers/dma/bestcomm/ |
D | Kconfig | 13 optional for some drivers (like ATA), but required for
|
/linux-4.1.27/drivers/iio/gyro/ |
D | Kconfig | 90 - st_gyro_i2c (necessary for the I2C devices [optional*]); 91 - st_gyro_spi (necessary for the SPI devices [optional*]);
|
/linux-4.1.27/Documentation/devicetree/bindings/net/dsa/ |
D | dsa.txt | 28 A switch child node has the following optional property: 33 otherwise optional.
|
/linux-4.1.27/drivers/iio/pressure/ |
D | Kconfig | 96 - st_pressure_i2c (necessary for the I2C devices [optional*]); 97 - st_pressure_spi (necessary for the SPI devices [optional*]);
|
/linux-4.1.27/Documentation/devicetree/bindings/drm/armada/ |
D | marvell,dove-lcd.txt | 18 Note: all clocks are optional but at least one must be specified.
|
/linux-4.1.27/Documentation/devicetree/bindings/rtc/ |
D | dw-apb.txt | 21 If using the clock specifiers, the pclk clock is optional, as not all
|
/linux-4.1.27/arch/x86/crypto/sha-mb/ |
D | sha1_mb_mgr_datastruct.S | 92 # RES_* macros take a name, a count and an optional alignment.
|
/linux-4.1.27/scripts/kconfig/ |
D | zconf.gperf | 28 optional, T_OPTIONAL, TF_COMMAND
|
/linux-4.1.27/Documentation/devicetree/bindings/dma/ |
D | mv-xor.txt | 15 And the following optional properties:
|
D | fsl-imx-dma.txt | 11 - interrupts : First item should be DMA interrupt, second one is optional and
|
/linux-4.1.27/fs/cifs/ |
D | Kconfig | 25 The module also provides optional support for the followon 34 safe distributed caching (oplock), optional packet 51 allow optional logging of slow responses to dmesg (depending on the 78 can be set to required (or optional) either in
|
/linux-4.1.27/Documentation/devicetree/bindings/drm/msm/ |
D | gpu.txt | 13 - qcom,chipid: gpu chip-id. Note this may become optional for future
|
/linux-4.1.27/Documentation/networking/ |
D | smc9.txt | 26 optional parameters:
|
D | dm9000.txt | 65 This shows a typical platform device, without the optional configuration 67 the optional platform data to pass extra configuration data:
|
D | dl2k.txt | 108 insmod dl2k.o <optional parameter> ; add parameter 162 options dl2k <optional parameters> 166 previous section for the list of optional parameters.
|
/linux-4.1.27/Documentation/devicetree/bindings/hwmon/ |
D | g762.txt | 20 If an optional property is not set in .dts file, then current value is kept
|
/linux-4.1.27/include/uapi/asm-generic/ |
D | Kbuild.asm | 2 # Headers that are optional in usr/include/asm/
|
/linux-4.1.27/Documentation/devicetree/bindings/net/wireless/ |
D | ti,wl1251.txt | 20 for optional SPI connection related properties,
|
/linux-4.1.27/Documentation/devicetree/bindings/crypto/ |
D | fsl-sec6.txt | 26 Usage: optional 59 but are optional.
|
D | fsl-sec4.txt | 60 Usage: optional 110 but are optional. 147 Usage: optional-but-recommended 259 Usage: optional-but-recommended 268 Usage: optional-but-recommended
|
/linux-4.1.27/drivers/iio/accel/ |
D | Kconfig | 64 - st_accel_i2c (necessary for the I2C devices [optional*]); 65 - st_accel_spi (necessary for the SPI devices [optional*]);
|
/linux-4.1.27/Documentation/devicetree/bindings/mailbox/ |
D | altera-mailbox.txt | 35 "mboxes" and the optional "mbox-names" (please see
|
/linux-4.1.27/arch/arm64/crypto/ |
D | Kconfig | 53 tristate "CRC32 and CRC32C using optional ARMv8 instructions"
|
/linux-4.1.27/arch/avr32/boards/atngw100/ |
D | Kconfig_mrmt | 64 RMT1 has an optional RTC device on the I2C bus.
|
D | Kconfig | 36 optional peripherals to the Atmel NGW100.
|
/linux-4.1.27/Documentation/i2c/ |
D | ten-bit-addresses | 16 * Some optional features do not support 10-bit addresses. This is the
|
D | writing-clients | 4 To set up a driver, you need to do several things. Some are optional, and 39 .pm = &foo_pm_ops, /* optional */ 50 .shutdown = foo_shutdown, /* optional */ 51 .command = foo_command, /* optional, deprecated */ 212 Note that this mechanism is purely optional and not suitable for all
|
/linux-4.1.27/Documentation/sound/alsa/soc/ |
D | dapm.txt | 61 o Headphone - Headphone (and optional Jack) 62 o Mic - Mic (and optional Jack) 63 o Line - Line Input/Output (and optional Jack) 152 A machine widget can have an optional call back.
|
D | platform.txt | 64 5) Suspend and resume (optional)
|
/linux-4.1.27/drivers/acpi/apei/ |
D | apei-internal.h | 54 int __apei_exec_run(struct apei_exec_context *ctx, u8 action, bool optional);
|
/linux-4.1.27/Documentation/filesystems/ |
D | tmpfs.txt | 101 [See Documentation/cgroups/cpusets.txt] and any optional flags, listed 105 NUMA memory allocation policies have optional flags that can be used in 106 conjunction with their modes. These optional flags can be specified
|
/linux-4.1.27/Documentation/nfc/ |
D | nfc-hci.txt | 88 - hci_ready() is an optional entry point that is called right after the hci 92 - start_poll() is an optional entrypoint that shall set the hardware in polling 99 - target_from_gate() is an optional entrypoint to return the nfc protocols 101 - complete_target_discovered() is an optional entry point to let the driver 111 - check_presence() is an optional entry point that will be called regularly
|
/linux-4.1.27/Documentation/filesystems/cifs/ |
D | cifs.txt | 16 performance safe distributed caching (oplock), optional packet
|
/linux-4.1.27/arch/arm/boot/dts/ |
D | omap3-overo-common-peripherals.dtsi | 50 /* optional 1K EEPROM with revision information */
|
/linux-4.1.27/Documentation/w1/ |
D | w1.generic | 110 w1_slave - (optional) a binary file whose meaning depends on the 112 rw - (optional) created for slave devices which do not have
|
/linux-4.1.27/Documentation/usb/ |
D | linux.inf | 57 HKR, NDI\params\VistaProperty, optional, 0, "1"
|
/linux-4.1.27/Documentation/x86/x86_64/ |
D | uefi.txt | 25 CONFIG_EFI_VARS=y or m # optional
|
/linux-4.1.27/tools/perf/Documentation/ |
D | perf-script.txt | 42 succeed. [args] refers to the (mainly optional) args expected by 53 optional script args to be specified; if optional script args are
|
/linux-4.1.27/Documentation/devicetree/bindings/bus/ |
D | ti-gpmc.txt | 36 Timing properties for child nodes. All are optional and default to 0. 92 GPMC chip-select settings properties for child nodes. All are optional.
|
/linux-4.1.27/Documentation/watchdog/ |
D | watchdog-kernel-api.txt | 91 /* optional operations */ 120 Some operations are mandatory and some are optional. The mandatory operations 135 all other routines/operations are optional. They only need to be provided if 136 they are supported. These optional routines/operations are:
|
/linux-4.1.27/Documentation/powerpc/ |
D | cxl.txt | 189 Indicates which optional fields in the structure are 303 These flags indicate which optional fields are present 325 These flags indicate which optional fields are present in 353 These flags indicate which optional fields are present in
|
/linux-4.1.27/Documentation/devicetree/bindings/soc/mediatek/ |
D | pwrap.txt | 16 are marked with "IP Pairing". These are optional on SoCs which do not support
|
/linux-4.1.27/Documentation/devicetree/bindings/i2c/ |
D | i2c-mux-gpio.txt | 39 If an idle state is defined, using the idle-state (optional) property,
|
/linux-4.1.27/drivers/staging/iio/Documentation/ |
D | ring.txt | 24 are optional.
|
/linux-4.1.27/Documentation/devicetree/bindings/iommu/ |
D | arm,smmu.txt | 44 ** System MMU optional properties:
|
/linux-4.1.27/Documentation/sound/oss/ |
D | PSS | 31 The mpu_io/mpu_irq fields are optional. If they are not specified the
|
/linux-4.1.27/Documentation/filesystems/caching/ |
D | netfs-api.txt | 177 [optional]. 179 (3) A function to select the cache in which to store an index [optional]. 199 (5) A function to retrieve attribute data from the netfs [optional]. 208 (6) A function to retrieve auxiliary data from the netfs [optional]. 221 (7) A function to check the auxiliary data [optional]. 241 [optional]. 254 (9) A function to mark a page as retaining cache metadata [optional]. 307 representation tags. This step is optional; it can be left entirely up to 404 An optional step is to request an object of miscellaneous type be created in 776 The optional can_enable() function is passed the data argument and returns a
|
/linux-4.1.27/Documentation/devicetree/bindings/serial/ |
D | qcom,msm-uartdm.txt | 17 register shall specify the main control registers. An optional second
|
/linux-4.1.27/Documentation/devicetree/bindings/lpddr2/ |
D | lpddr2.txt | 19 The following optional properties represent the minimum value of some AC
|