1SHARP LS037V7DW01 TFT-LCD panel
2===================================
3
4Required properties:
5- compatible: "sharp,ls037v7dw01"
6
7Optional properties:
8- label: a symbolic name for the panel
9- enable-gpios: a GPIO spec for the optional enable pin.
10  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
11- reset-gpios: a GPIO spec for the optional reset pin.
12  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
13- mode-gpios: a GPIO
14  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
15
16Required nodes:
17- Video port for DPI input
18
19This panel can have zero to five GPIOs to configure to change configuration
20between QVGA and VGA mode and the scan direction. As these pins can be also
21configured with external pulls, all the GPIOs are considered optional with holes
22in the array.
23
24Example
25-------
26
27Example when connected to a omap2+ based device:
28
29lcd0: display {
30	compatible = "sharp,ls037v7dw01";
31	power-supply = <&lcd_3v3>;
32	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
33	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
34	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
35		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
36		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
37
38	port {
39		lcd_in: endpoint {
40			remote-endpoint = <&dpi_out>;
41		};
42	};
43};
44