/linux-4.4.14/drivers/pinctrl/sh-pfc/ |
D | Kconfig | 18 depends on PINCTRL_SH_PFC && GPIOLIB 25 depends on ARCH_EMEV2 30 depends on ARCH_R8A73A4 35 depends on ARCH_R8A7740 40 depends on ARCH_R8A7778 45 depends on ARCH_R8A7779 50 depends on ARCH_R8A7790 55 depends on ARCH_R8A7791 60 depends on ARCH_R8A7793 65 depends on ARCH_R8A7794 [all …]
|
/linux-4.4.14/arch/arm/boot/dts/ |
D | mmp2-brownstone.dts | 18 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 45 regulator-boot-on; 46 regulator-always-on; 51 regulator-boot-on; 52 regulator-always-on; 57 regulator-boot-on; 58 regulator-always-on; 63 regulator-boot-on; 64 regulator-always-on; 69 regulator-boot-on; [all …]
|
D | imx53-qsrb.dts | 45 regulator-boot-on; 46 regulator-always-on; 53 regulator-boot-on; 54 regulator-always-on; 61 regulator-boot-on; 62 regulator-always-on; 69 regulator-boot-on; 76 regulator-boot-on; 77 regulator-always-on; 84 regulator-boot-on; [all …]
|
D | pxa910-dkb.dts | 18 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 48 regulator-boot-on; 49 regulator-always-on; 54 regulator-boot-on; 55 regulator-always-on; 60 regulator-boot-on; 61 regulator-always-on; 66 regulator-boot-on; 67 regulator-always-on; 72 regulator-boot-on; [all …]
|
D | rk3288-evb-rk808.dts | 89 regulator-always-on; 90 regulator-boot-on; 100 regulator-always-on; 101 regulator-boot-on; 106 regulator-on-in-suspend; 112 regulator-always-on; 113 regulator-boot-on; 116 regulator-on-in-suspend; 121 regulator-always-on; 122 regulator-boot-on; [all …]
|
D | imx6sx-sdb-reva.dts | 29 regulator-boot-on; 30 regulator-always-on; 37 regulator-boot-on; 38 regulator-always-on; 45 regulator-boot-on; 46 regulator-always-on; 52 regulator-boot-on; 53 regulator-always-on; 59 regulator-boot-on; 60 regulator-always-on; [all …]
|
D | exynos5420-smdk5420.dts | 17 model = "Samsung SMDK5420 board based on EXYNOS5420"; 46 regulator-always-on; 55 regulator-always-on; 64 regulator-always-on; 155 regulator-always-on; 162 regulator-always-on; 169 regulator-always-on; 176 regulator-always-on; 183 regulator-always-on; 190 regulator-always-on; [all …]
|
D | tegra114-tn7.dts | 89 regulator-always-on; 90 regulator-boot-on; 97 regulator-always-on; 98 regulator-boot-on; 105 regulator-always-on; 106 regulator-boot-on; 113 regulator-always-on; 114 regulator-boot-on; 121 regulator-always-on; 122 regulator-boot-on; [all …]
|
D | imx6sx-sdb.dts | 44 regulator-boot-on; 45 regulator-always-on; 52 regulator-boot-on; 53 regulator-always-on; 59 regulator-boot-on; 60 regulator-always-on; 66 regulator-boot-on; 67 regulator-always-on; 78 regulator-boot-on; 79 regulator-always-on; [all …]
|
D | exynos4412-origen.dts | 7 * Device tree source file for Insignal's Origen board which is based on 21 model = "Insignal Origen evaluation board based on Exynos4412"; 139 regulator-always-on; 140 regulator-boot-on; 148 regulator-always-on; 156 regulator-always-on; 164 regulator-always-on; 172 regulator-always-on; 180 regulator-always-on; 188 regulator-always-on; [all …]
|
D | exynos5250-arndale.dts | 19 model = "Insignal Arndale evaluation board based on EXYNOS5250"; 209 regulator-always-on; 210 regulator-boot-on; 218 regulator-always-on; 219 regulator-boot-on; 227 regulator-always-on; 228 regulator-boot-on; 236 regulator-always-on; 244 regulator-always-on; 245 regulator-boot-on; [all …]
|
D | exynos5422-odroidxu3-common.dtsi | 117 regulator-always-on; 124 regulator-always-on; 131 regulator-always-on; 138 regulator-always-on; 145 regulator-always-on; 152 regulator-always-on; 159 regulator-always-on; 166 regulator-always-on; 173 regulator-always-on; 180 regulator-always-on; [all …]
|
D | imx53-qsb.dts | 32 regulator-always-on; 38 regulator-always-on; 44 regulator-always-on; 50 regulator-always-on; 56 regulator-boot-on; 57 regulator-always-on; 63 regulator-always-on; 69 regulator-always-on; 75 regulator-always-on; 81 regulator-always-on; [all …]
|
D | exynos4412-odroid-common.dtsi | 231 regulator-always-on; 238 regulator-always-on; 245 regulator-always-on; 252 regulator-always-on; 253 regulator-boot-on; 260 regulator-always-on; 261 regulator-boot-on; 268 regulator-always-on; 275 regulator-always-on; 294 regulator-always-on; [all …]
|
D | rk3288-popmetal.dts | 130 regulator-always-on; 131 regulator-boot-on; 155 regulator-always-on; 244 regulator-always-on; 245 regulator-boot-on; 255 regulator-always-on; 256 regulator-boot-on; 261 regulator-on-in-suspend; 267 regulator-always-on; 268 regulator-boot-on; [all …]
|
D | am335x-igep0033.dtsi | 36 default-state = "on"; 45 regulator-boot-on; 137 gpmc,cs-on-ns = <0>; 140 gpmc,adv-on-ns = <6>; 143 gpmc,we-on-ns = <0>; 145 gpmc,oe-on-ns = <0>; 150 gpmc,wait-on-read = "true"; 151 gpmc,wait-on-write = "true"; 258 regulator-always-on; 262 regulator-always-on; [all …]
|
D | integratorap.dts | 22 /* 24 MHz chrystal on the core module */ 90 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ 91 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ 92 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ 93 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ 95 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ 96 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ 97 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ 98 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ 100 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ [all …]
|
D | s5pv210-aquila.dts | 21 model = "Samsung Aquila based on S5PC110"; 97 regulator-always-on; 104 regulator-always-on; 117 regulator-always-on; 124 regulator-always-on; 131 regulator-always-on; 132 regulator-boot-on; 139 regulator-always-on; 146 regulator-always-on; 153 regulator-always-on; [all …]
|
D | am335x-chilisom.dtsi | 137 regulator-always-on; 145 regulator-boot-on; 146 regulator-always-on; 154 regulator-boot-on; 155 regulator-always-on; 160 regulator-boot-on; 161 regulator-always-on; 166 regulator-boot-on; 167 regulator-always-on; 172 regulator-boot-on; [all …]
|
D | imx27-phytec-phycore-som.dtsi | 105 regulator-always-on; 106 regulator-boot-on; 113 regulator-always-on; 114 regulator-boot-on; 120 regulator-always-on; 121 regulator-boot-on; 125 regulator-always-on; 126 regulator-boot-on; 132 regulator-always-on; 133 regulator-boot-on; [all …]
|
D | sh73a0-kzm9g.dts | 6 * Based on sh73a0-kzm9g.dts 56 regulator-always-on; 57 regulator-boot-on; 65 regulator-always-on; 66 regulator-boot-on; 230 regulator-always-on; 231 regulator-boot-on; 237 regulator-always-on; 238 regulator-boot-on; 244 regulator-always-on; [all …]
|
D | imx51-digi-connectcore-som.dtsi | 46 regulator-boot-on; 47 regulator-always-on; 53 regulator-boot-on; 54 regulator-always-on; 60 regulator-boot-on; 61 regulator-always-on; 67 regulator-always-on; 73 regulator-always-on; 79 regulator-always-on; 85 regulator-always-on; [all …]
|
D | imx6q-dmo-edmqmx6.dts | 47 regulator-always-on; 57 regulator-boot-on; 58 regulator-always-on; 153 regulator-boot-on; 154 regulator-always-on; 160 regulator-boot-on; 161 regulator-always-on; 167 regulator-boot-on; 168 regulator-always-on; 174 regulator-boot-on; [all …]
|
D | am335x-phycore-som.dtsi | 40 regulator-boot-on; 41 regulator-always-on; 174 gpmc,cs-on-ns = <0>; 177 gpmc,adv-on-ns = <0>; 180 gpmc,we-on-ns = <0>; 182 gpmc,oe-on-ns = <10>; 187 gpmc,wait-on-read = "true"; 188 gpmc,wait-on-write = "true"; 256 regulator-always-on; 260 regulator-always-on; [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/regulator/ |
D | pfuze100.txt | 32 regulator-boot-on; 33 regulator-always-on; 40 regulator-boot-on; 41 regulator-always-on; 47 regulator-boot-on; 48 regulator-always-on; 54 regulator-boot-on; 55 regulator-always-on; 61 regulator-boot-on; 62 regulator-always-on; [all …]
|
D | tps65090.txt | 54 regulator-boot-on; 55 regulator-always-on; 62 regulator-boot-on; 63 regulator-always-on; 68 regulator-boot-on; 69 regulator-always-on; 74 regulator-boot-on; 75 regulator-always-on; 80 regulator-boot-on; 81 regulator-always-on; [all …]
|
D | tps65217.txt | 15 - ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle. 32 regulator-boot-on; 33 regulator-always-on; 39 regulator-boot-on; 40 regulator-always-on; 46 regulator-boot-on; 47 regulator-always-on; 53 regulator-boot-on; 54 regulator-always-on; 60 regulator-boot-on; [all …]
|
D | ltc3589.txt | 16 Required properties (not on ldo3, ldo4): 24 regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 25 regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V 26 and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not 27 be disabled and thus should have the regulator-always-on property set. 41 regulator-boot-on; 42 regulator-always-on; 50 regulator-boot-on; 51 regulator-always-on; 59 regulator-boot-on; [all …]
|
/linux-4.4.14/drivers/usb/musb/ |
D | Kconfig | 3 # for silicon based on Mentor Graphics INVENTRA designs 9 depends on (USB || USB_GADGET) 12 controller based on the Mentor Graphics silicon IP. Then 40 depends on USB=y || USB=USB_MUSB_HDRC 47 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC 48 depends on HAS_DMA 55 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) 56 depends on HAS_DMA 67 depends on ARCH_SUNXI 68 depends on NOP_USB_XCEIV [all …]
|
/linux-4.4.14/drivers/phy/ |
D | Kconfig | 20 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF 23 Enable this to support the USB PHY on Marvell Berlin SoCs. 27 depends on ARCH_BERLIN && HAS_IOMEM && OF 30 Enable this to support the SATA PHY on Marvell Berlin SoCs. 34 depends on MACH_ARMADA_375 || COMPILE_TEST 35 depends on OF 40 depends on ARCH_OMAP2PLUS 41 depends on USB_SUPPORT 49 depends on HAS_IOMEM 50 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST [all …]
|
/linux-4.4.14/drivers/leds/ |
D | Kconfig | 24 depends on LEDS_CLASS 36 depends on LEDS_CLASS 37 depends on MFD_88PM860X 39 This option enables support for on-chip LED drivers found on Marvell 44 depends on LEDS_CLASS_FLASH 45 depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS 46 depends on GPIOLIB || COMPILE_TEST 47 depends on OF 48 depends on PINCTRL 50 This option enables support for the LEDs on the AAT1290. [all …]
|
/linux-4.4.14/kernel/ |
D | Kconfig.locks | 2 # The ARCH_INLINE foo is necessary because select ignores "depends on" 113 depends on ARCH_INLINE_SPIN_TRYLOCK 117 depends on ARCH_INLINE_SPIN_TRYLOCK_BH 121 depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK 125 depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK_BH 129 depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK_IRQ 133 depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK_IRQSAVE 137 depends on ARCH_INLINE_SPIN_UNLOCK_BH 141 depends on !PREEMPT || ARCH_INLINE_SPIN_UNLOCK_IRQ 145 depends on ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE [all …]
|
/linux-4.4.14/sound/soc/samsung/ |
D | Kconfig | 3 depends on (PLAT_SAMSUNG || ARCH_EXYNOS) 4 depends on S3C64XX_PL080 || !ARCH_S3C64XX 5 depends on S3C24XX_DMAC || !ARCH_S3C24XX 38 depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02 48 depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C 52 Say Y if you want to add support for SoC audio on the Jive. 55 tristate "SoC I2S Audio support for WM8580 on SMDK" 56 depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) 57 depends on I2C 61 Say Y if you want to add support for SoC audio on the SMDKs. [all …]
|
/linux-4.4.14/drivers/media/platform/ |
D | Kconfig | 7 depends on MEDIA_CAMERA_SUPPORT 18 depends on FB_VIA 23 Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems 38 depends on MEDIA_CAMERA_SUPPORT 39 depends on VIDEO_DEV && I2C && HAS_DMA 40 depends on ARCH_SHMOBILE || COMPILE_TEST 43 Support for the Video Output Unit (VOU) on SuperH SoCs. 47 depends on VIDEO_V4L2 && PPC_MPC512x 52 video data, or overlays video on DIU frame buffer. 54 Say Y here if you want to enable VIU device on MPC5121e Rev2+. [all …]
|
/linux-4.4.14/arch/cris/arch-v10/drivers/ |
D | Kconfig | 5 depends on ETRAX_ARCH_V10 && NETDEVICES 13 depends on ETRAX_ARCH_V10 20 depends on ETRAX_SERIAL 29 depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER 38 depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER && !ETRAX_SERIAL_FLUSH_DMA_FAST 48 depends on ETRAX_SERIAL 51 Normally you want this on, unless you use external DMA 1 that uses 56 depends on ETRAX_SERIAL_PORT0 68 Enables the status and control signals DTR, RI, DSR and CD on PB for 77 …int "Ser0 DTR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DS… [all …]
|
/linux-4.4.14/include/linux/usb/ |
D | otg-fsm.h | 125 void (*chrg_vbus)(struct otg_fsm *fsm, int on); 126 void (*drv_vbus)(struct otg_fsm *fsm, int on); 127 void (*loc_conn)(struct otg_fsm *fsm, int on); 128 void (*loc_sof)(struct otg_fsm *fsm, int on); 134 int (*start_host)(struct otg_fsm *fsm, int on); 135 int (*start_gadget)(struct otg_fsm *fsm, int on); 139 static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on) in otg_chrg_vbus() argument 143 fsm->ops->chrg_vbus(fsm, on); in otg_chrg_vbus() 147 static inline int otg_drv_vbus(struct otg_fsm *fsm, int on) in otg_drv_vbus() argument 151 if (fsm->drv_vbus != on) { in otg_drv_vbus() [all …]
|
/linux-4.4.14/drivers/ssb/ |
D | Kconfig | 3 depends on HAS_IOMEM && HAS_DMA 7 depends on SSB_POSSIBLE 11 depends on SSB_POSSIBLE 31 depends on SSB 35 depends on SSB && (PCI = y || PCI = SSB) 39 bool "Support for SSB on PCI-bus host" 40 depends on SSB_PCIHOST_POSSIBLE 44 Support for a Sonics Silicon Backplane on top 51 depends on SSB_PCIHOST 56 depends on SSB && (PCMCIA = y || PCMCIA = SSB) [all …]
|
/linux-4.4.14/drivers/pci/host/ |
D | Kconfig | 2 depends on PCI 7 depends on OF && HAS_IOMEM && TI_PIPE3 8 depends on BROKEN 16 depends on ARCH_MVEBU || ARCH_DOVE 17 depends on OF 24 depends on SOC_EXYNOS5440 30 depends on SOC_IMX6Q 36 depends on ARCH_TEGRA && !ARM64 39 on NVIDIA Tegra SoCs. 43 depends on ARM [all …]
|
/linux-4.4.14/drivers/platform/x86/ |
D | Kconfig | 8 depends on X86 20 depends on ACPI 23 depends on BACKLIGHT_CLASS_DEVICE 24 depends on SERIO_I8042 25 depends on INPUT 26 depends on RFKILL || RFKILL = n 27 depends on ACPI_WMI 29 # Acer WMI depends on ACPI_VIDEO when ACPI is enabled 33 wireless radio and bluetooth control, and on some laptops, 41 depends on ACPI && THERMAL [all …]
|
/linux-4.4.14/drivers/edac/ |
D | Kconfig | 14 depends on HAS_IOMEM && EDAC_SUPPORT 22 If this code is reporting problems on your system, please 47 This turns on debugging information for the entire EDAC subsystem. 53 tristate "Decode MCEs in human-readable form (only on AMD for now)" 54 depends on CPU_SUP_AMD && X86_MCE_AMD 58 occurring on your machine in human-readable form. 69 memory. EDAC can report statistics on memory error 77 depends on ACPI_APEI_GHES && (EDAC_MM_EDAC=y) 100 depends on EDAC_MM_EDAC && AMD_NB && EDAC_DECODE_MCE 102 Support for error detection and correction of DRAM ECC errors on [all …]
|
/linux-4.4.14/Documentation/filesystems/ |
D | 00-INDEX | 2 - this file (info on some of the filesystems supported by linux). 4 - info on locking rules as they pertain to Linux VFS. 16 - info on device control operations for autofs4 module. 36 - info on the cram filesystem for small storage (ROMs etc). 38 - info on avoiding the page cache for files stored on CPU-addressable 41 - info on the debugfs filesystem. 43 - info on the devpts filesystem. 47 - info on the userspace interface to the OCFS2 DLM. 53 - docs on eCryptfs: stacked cryptographic filesystem for Linux. 67 - info on fiemap ioctl. [all …]
|
/linux-4.4.14/drivers/mtd/maps/ |
D | Kconfig | 2 depends on MTD!=n 3 depends on HAS_IOMEM 13 depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_LPDDR 18 the physical address and size of the flash chips on your 27 depends on MTD_PHYSMAP 38 depends on MTD_PHYSMAP_COMPAT 42 are mapped on your particular target board. Refer to the 48 depends on MTD_PHYSMAP_COMPAT 51 This is the total length of the mapping of the flash chips on 60 depends on MTD_PHYSMAP_COMPAT [all …]
|
/linux-4.4.14/arch/arm/ |
D | Kconfig.debug | 7 depends on DEBUG_KERNEL 8 depends on MMU 20 depends on MMU 27 If this option is switched on, the /dev/mem file only allows 38 depends on !THUMB2_KERNEL 48 depends on AEABI 59 depends on FUNCTION_TRACER && FRAME_POINTER 67 sometimes helpful for debugging but serves no purpose on a 70 In addition, you need to pass user_debug=N on the kernel command 82 depends on DEBUG_KERNEL [all …]
|
/linux-4.4.14/drivers/isdn/hardware/mISDN/ |
D | Kconfig | 8 depends on MISDN 9 depends on PCI 16 depends on PCI || 8xx 17 depends on MISDN 22 * HFC-4S (4 S/T interfaces on one chip) 23 * HFC-8S (8 S/T interfaces on one chip) 28 depends on MISDN 29 depends on MISDN_HFCMULTI 30 depends on 8xx 37 depends on USB [all …]
|
/linux-4.4.14/Documentation/isdn/ |
D | README.act2000 | 18 on on on on 0x0200 (Factory default) 19 off on on on 0x0240 20 on off on on 0x0280 21 off off on on 0x02c0 22 on on off on 0x0300 23 off on off on 0x0340 24 on off off on 0x0380 25 on on on off 0xcfe0 26 off on on off 0xcfa0 27 on off on off 0xcf60 [all …]
|
D | 00-INDEX | 2 - this file (info on ISDN implementation for Linux) 14 - general info on what you need and what to do for Linux ISDN. 18 - info on the HiSax driver which replaces the old teles. 20 - info on driver for IBM ACT-2000 card. 24 - info on driver for AVM-B1 ISDN card. 26 - info on "CONCAP" encapsulation protocol interface used for X.25. 28 - info on module for isdn diversion services. 32 - info on the drivers for Siemens Gigaset ISDN adapters 34 - info on hfc-pci based cards. 36 - info on driver for Hypercope active HYSDN cards [all …]
|
/linux-4.4.14/Documentation/ |
D | 00-INDEX | 5 Please keep the descriptions small enough to fit on one line. 8 Following translations are available on the WWW: 16 - info on kernel <-> userspace ABI and relative interface stability. 35 - directory with info on customizing EDID for broken gfx/displays. 39 - info on Linux Intelligent Platform Management Interface (IPMI) Driver. 41 - how to select which CPU(s) handle which interrupt events on SMP. 43 - info on interrupt numbering and setting up IRQ domains. 47 - basic info on the Intel IOMMU virtualization support. 53 - directory with info on RCU (read-copy update). 55 - info on Secure Attention Keys. [all …]
|
/linux-4.4.14/drivers/tty/serial/ |
D | Kconfig | 8 depends on HAS_IOMEM 23 depends on ARM_AMBA 33 bool "Support for console on AMBA serial port" 34 depends on SERIAL_AMBA_PL010=y 50 depends on ARM_AMBA 60 bool "Support for console on AMBA serial port" 61 depends on SERIAL_AMBA_PL011=y 78 depends on ARM64 || ARM 85 with "earlycon=smh" on the kernel command line. The console is 89 tristate "BCM1xxx on-chip DUART serial support" [all …]
|
/linux-4.4.14/sound/soc/pxa/ |
D | Kconfig | 3 depends on ARCH_PXA 12 depends on ARCH_MMP 42 depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx && I2C 46 Say Y if you want to add support for SoC audio on Sharp 51 depends on SND_PXA2XX_SOC && PXA_SHARP_Cxx00 && I2C 55 Say Y if you want to add support for SoC audio on Sharp 60 depends on SND_PXA2XX_SOC && MACH_ZIPIT2 && I2C 64 Say Y if you want to add support for SoC audio on Zipit Z2. 68 depends on SND_PXA2XX_SOC && MACH_POODLE && I2C 72 Say Y if you want to add support for SoC audio on Sharp [all …]
|
/linux-4.4.14/drivers/media/platform/soc_camera/ |
D | Kconfig | 3 depends on VIDEO_V4L2 && HAS_DMA && I2C 16 depends on SOC_CAMERA 22 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA 23 depends on MX3_IPU || COMPILE_TEST 24 depends on HAS_DMA 31 depends on VIDEO_DEV && PXA27x && SOC_CAMERA 38 depends on VIDEO_DEV && SOC_CAMERA 39 depends on ARCH_SHMOBILE || COMPILE_TEST 40 depends on HAS_DMA 48 depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK [all …]
|
/linux-4.4.14/drivers/staging/fbtft/ |
D | Kconfig | 3 depends on FB && SPI 4 depends on GPIOLIB || COMPILE_TEST 14 depends on FB_TFT 20 depends on FB_TFT 26 depends on FB_TFT 32 depends on FB_TFT 38 depends on FB_TFT 44 depends on FB_TFT 50 depends on FB_TFT 56 depends on FB_TFT [all …]
|
/linux-4.4.14/Documentation/fb/ |
D | 00-INDEX | 11 - info on the fbdev driver for ARK Logic chips. 13 - info on the ATI Rage128 frame buffer driver. 15 - info on the driver for Cirrus Logic chipsets. 21 - info on the EFI platform driver for Intel based Apple computers. 23 - info on the driver for EP93xx LCD controller. 29 - info on the framebuffer driver for AMD Geode GX2 based processors. 37 - info on the framebuffer driver for AMD Geode LX based processors. 39 - info on the Matrox framebuffer driver for Alpha, Intel and PPC. 41 - info on the driver for the Metronome display controller. 43 - info on the video mode database. [all …]
|
/linux-4.4.14/drivers/mtd/nand/ |
D | Kconfig | 6 depends on MTD_NAND_ECC 15 depends on MTD 28 depends on MTD_NAND_ECC_BCH 48 tristate "Support Denali NAND controller on Intel Moorestown" 50 depends on HAS_DMA && PCI 52 Enable the driver for NAND flash on Intel Moorestown, using the 58 depends on HAS_DMA && HAVE_CLK 60 Enable the driver for NAND flash on platforms using a Denali NAND 66 depends on MTD_NAND_DENALI_PCI 76 depends on GPIOLIB || COMPILE_TEST [all …]
|
/linux-4.4.14/drivers/media/usb/gspca/ |
D | Kconfig | 3 depends on VIDEO_V4L2 4 depends on INPUT || INPUT=n 8 on the GSPCA framework. 27 depends on VIDEO_V4L2 && USB_GSPCA 36 depends on VIDEO_V4L2 && USB_GSPCA 38 Say Y here if you want support for cameras based on the Conexant chip. 45 depends on VIDEO_V4L2 && USB_GSPCA 47 Say Y here if you want support for USB cameras based on the cpia 56 depends on VIDEO_V4L2 && USB_GSPCA 66 depends on VIDEO_V4L2 && USB_GSPCA [all …]
|
/linux-4.4.14/drivers/power/ |
D | Kconfig | 19 depends on !S390 27 depends on APM_EMULATION 34 depends on IIO 41 depends on MFD_MAX8925 48 depends on MFD_WM831X 55 depends on MFD_WM831X 62 depends on MFD_WM8350 74 depends on MFD_88PM860X 80 depends on W1 && W1_SLAVE_DS2760 86 depends on HAS_IOMEM [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/mfd/ |
D | rk808.txt | 78 regulator-always-on; 79 regulator-boot-on; 86 regulator-always-on; 87 regulator-boot-on; 94 regulator-always-on; 95 regulator-boot-on; 100 regulator-always-on; 101 regulator-boot-on; 108 regulator-always-on; 109 regulator-boot-on; [all …]
|
D | tps6507x.txt | 19 If some of input supply is powered through battery or always-on 21 node handle of always on power supply. 52 regulator-always-on; 53 regulator-boot-on; 60 regulator-always-on; 61 regulator-boot-on; 69 regulator-always-on; 70 regulator-boot-on; 78 regulator-always-on; 79 regulator-boot-on; [all …]
|
/linux-4.4.14/drivers/regulator/ |
D | Kconfig | 59 depends on MFD_88PM800 69 depends on MFD_88PM860X=y 75 depends on I2C 83 depends on I2C 89 tristate "Freescale i.MX on-chip ANATOP LDO regulators" 90 depends on MFD_SYSCON 92 Say y here to support Freescale i.MX on-chip ANATOP LDOs 94 enabled on i.MX6 platform. 98 depends on MFD_AAT2870_CORE 105 depends on AB3100_CORE [all …]
|
/linux-4.4.14/drivers/spi/ |
D | Kconfig | 10 depends on HAS_IOMEM 33 depends on DEBUG_KERNEL 64 depends on ATH79 && GPIOLIB 67 This enables support for the SPI controller present on the 72 depends on HAS_DMA 73 depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) 75 This selects a driver for the Atmel SPI Controller, present on 80 depends on GPIOLIB 81 depends on ARCH_BCM2835 || COMPILE_TEST 82 depends on GPIOLIB [all …]
|
/linux-4.4.14/arch/sh/boards/ |
D | Kconfig | 13 depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ 23 depends on CPU_SUBTYPE_SH7206 31 depends on CPU_SUBTYPE_SH7619 39 depends on CPU_SUBTYPE_SH7721 49 depends on CPU_SUBTYPE_SH7722 57 depends on CPU_SUBTYPE_SH7724 69 depends on CPU_SUBTYPE_SH7751 78 depends on CPU_SUBTYPE_SH7780 88 depends on CPU_SUBTYPE_SH7343 97 depends on CPU_SUBTYPE_SH7709 [all …]
|
/linux-4.4.14/drivers/ata/ |
D | Kconfig | 15 depends on HAS_IOMEM 16 depends on BLOCK 17 depends on !(M32R || M68K || S390) || BROKEN 30 depending on your hardware configuration. 51 depends on ACPI 64 depends on ATA_ACPI && PM 69 support, and if enabled, will automatically power on/off the 87 depends on PCI 103 depends on ARCH_BRCMSTB 105 This option enables support for the AHCI SATA3 controller found on [all …]
|
/linux-4.4.14/Documentation/scsi/ |
D | 00-INDEX | 4 - info on driver for 53c700 based adapters 6 - info on driver for adapters with BusLogic chips 26 - info on driver for BusLogic FlashPoint adapters 34 - info on driver for Mylex adapters 36 - info on WorkBiT NinjaSCSI-32/32Bi driver 42 - info on driver for Adaptec AHA152x based adapters 46 - info on driver for Adaptec controllers 58 - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters 60 - info on driver for DTC 2x80 based adapters 62 - info on driver for NCR5380 and NCR53c400 based adapters [all …]
|
/linux-4.4.14/drivers/clk/qcom/ |
D | Kconfig | 7 depends on OF 8 depends on ARCH_QCOM || COMPILE_TEST 15 depends on COMMON_CLK_QCOM 17 Support for the global clock controller on apq8084 devices. 25 depends on COMMON_CLK_QCOM 27 Support for the multimedia clock controller on apq8084 devices. 33 depends on COMMON_CLK_QCOM 35 Support for the global clock controller on ipq806x devices. 42 depends on COMMON_CLK_QCOM 44 Support for the LPASS clock controller on ipq806x devices. [all …]
|
/linux-4.4.14/arch/powerpc/platforms/ |
D | Kconfig.cputype | 13 depends on PPC32 61 depends on PPC64 89 depends on PPC64 93 The resulting kernel may not run on other CPUs, so use this with care. 99 depends on !CPU_LITTLE_ENDIAN 103 depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN 107 depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN 111 depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN 115 depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN 119 depends on PPC_BOOK3S_64 [all …]
|
D | Kconfig | 44 depends on 6xx || PPC64 46 Support for running natively on the hardware, i.e. without 52 depends on 6xx || PPC64 64 depends on PPC_RTAS 73 messages on to one ipi. 85 depends on MPIC && FSL_SOC 91 an interrupt. The driver currently is only tested on fsl 97 depends on FSL_SOC && MPIC_TIMER && PM 115 depends on MPIC 127 depends on PPC64 [all …]
|
/linux-4.4.14/drivers/bus/ |
D | Kconfig | 20 depends on (ARM && CPU_V7) || ARM64 21 depends on PERF_EVENTS 25 Support for PMU events monitoring on the ARM CCI-400 (cache coherent 31 depends on ARM && OF && CPU_V7 39 depends on (ARM && CPU_V7) || ARM64 40 depends on PERF_EVENTS 43 Support for PMU events monitoring on the ARM CCI-500 cache coherent 52 depends on ARM || ARM64 53 depends on PERF_EVENTS 60 depends on ARM || MIPS [all …]
|
/linux-4.4.14/drivers/bcma/ |
D | Kconfig | 3 depends on HAS_IOMEM && HAS_DMA 7 depends on BCMA_POSSIBLE 11 depends on BCMA_POSSIBLE 19 depends on BCMA 23 depends on BCMA && PCI = y 27 bool "Support for BCMA on PCI-host bus" 28 depends on BCMA_HOST_PCI_POSSIBLE 34 depends on BCMA 44 depends on BCMA && PCI 52 In general PCIe (Gen 2) clientmode core is required on PCIe [all …]
|
/linux-4.4.14/drivers/mmc/host/ |
D | Kconfig | 9 depends on ARM_AMBA 19 depends on MMC_ARMMMCI && QCOM_BAM_DMA 22 This selects the Qualcomm Data Mover lite/local on SD Card controller. 30 depends on ARCH_PXA 40 depends on HAS_DMA 53 depends on MMC_SDHCI 60 depends on MMC_SDHCI 63 This option is selected by drivers running on big endian hosts 73 tristate "SDHCI support on PCI bus" 74 depends on MMC_SDHCI && PCI [all …]
|
/linux-4.4.14/drivers/media/dvb-frontends/ |
D | Kconfig | 5 depends on DVB_CORE 9 depends on DVB_CORE && I2C 17 depends on DVB_CORE && I2C 25 depends on DVB_CORE && I2C 33 depends on DVB_CORE && I2C 40 depends on DVB_CORE && I2C && I2C_MUX 47 depends on DVB_CORE 51 depends on DVB_CORE && I2C 60 depends on DVB_CORE && I2C 69 depends on DVB_CORE && I2C [all …]
|
/linux-4.4.14/net/mac80211/ |
D | Kconfig | 3 depends on CFG80211 15 depends on CFG80211=n 31 depends on MAC80211_RC_MINSTREL 38 depends on MAC80211_RC_MINSTREL_HT 45 depends on MAC80211_HAS_RC 55 depends on MAC80211_RC_MINSTREL 71 depends on MAC80211 && MAC80211_HAS_RC=n 75 depends on MAC80211 78 The implementation is based on Draft 2.08 of the Mesh Networking 85 depends on MAC80211 [all …]
|
/linux-4.4.14/drivers/usb/host/ |
D | Kconfig | 31 depends on PCI 47 depends on ARCH_MVEBU || COMPILE_TEST 55 depends on ARCH_SHMOBILE || COMPILE_TEST 85 depends on USB_EHCI_HCD 97 depends on USB_EHCI_HCD 122 depends on PCI 126 tristate "EHCI support for on-chip PMC MSP71xx USB controller" 127 depends on MSP_HAS_USB 132 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. 137 depends on (PPC32 || MICROBLAZE) [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/clock/ |
D | sunxi.txt | 11 "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 12 "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23 13 "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80 16 "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 17 "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80 20 "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 23 "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 24 "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 25 "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 26 "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 [all …]
|
/linux-4.4.14/drivers/gpio/ |
D | Kconfig | 17 it is possible to use gpiolib on the architecture, but let the 20 not depend on GPIOs being available, but rather let the user 36 depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB 48 depends on HAS_IOMEM 52 depends on OF 56 depends on ACPI 64 depends on DEBUG_KERNEL 75 depends on SYSFS 101 depends on OF_GPIO 115 depends on OF_GPIO [all …]
|
/linux-4.4.14/arch/m68k/ |
D | Kconfig.machine | 7 depends on MMU 11 you plan to use this kernel on an Amiga, say Y here and browse the 16 depends on MMU 21 this kernel on an Atari, say Y here and browse the material 26 depends on MMU 38 depends on MMU 41 Say Y here if you want to run Linux on an MC680x0-based Apollo 46 depends on MMU 56 depends on MMU 57 depends on VME [all …]
|
D | Kconfig.cpu | 15 If you anticipate running this kernel on a computer with a classic 17 If you anticipate running this kernel on a computer with a ColdFire 38 depends on !MMU 56 based on the 68020 processor. For the most part it is used in 61 depends on MMU 64 If you anticipate running this kernel on a computer with a MC68020 66 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the 71 depends on MMU && !MMU_SUN3 74 If you anticipate running this kernel on a computer with a MC68030 80 depends on MMU && !MMU_SUN3 [all …]
|
/linux-4.4.14/drivers/power/reset/ |
D | Kconfig | 5 or shut it down, by manipulating the main power supply on the board. 13 depends on MFD_AS3722 19 depends on ARCH_AT91 27 depends on ARCH_AT91 35 depends on ARCH_AXXIA 43 depends on ARM || MIPS || COMPILE_TEST 44 depends on MFD_SYSCON 54 depends on OF_GPIO 62 depends on OF_GPIO 70 depends on ARCH_HISI [all …]
|
/linux-4.4.14/drivers/pinctrl/ |
D | Kconfig | 9 depends on PINCTRL 23 depends on DEBUG_KERNEL 29 depends on BLACKFIN 39 depends on MFD_AS3722 && GPIOLIB 58 depends on OF 59 depends on ARCH_AT91 70 depends on OF 71 depends on ARCH_AT91 79 controller available on sama5d2 SoC. 83 depends on GPIOLIB [all …]
|
/linux-4.4.14/drivers/media/v4l2-core/ |
D | Kconfig | 8 depends on (I2C || I2C=n) && VIDEO_DEV 12 bool "Enable advanced debug functionality on V4L2 drivers" 15 Say Y here to enable advanced debugging functionality on some 20 bool "Enable old-style fixed minor ranges on drivers/video devices" 24 Only useful if you rely on the old behavior and use mknod instead of udev. 30 depends on PCI && BUILD_DOCSRC 31 depends on VIDEO_V4L2 && VIDEOBUF2_CORE 32 depends on VIDEOBUF2_MEMOPS && VIDEOBUF2_DMA_CONTIG 40 depends on MEDIA_TUNER 45 depends on VIDEOBUF2_CORE [all …]
|
/linux-4.4.14/arch/powerpc/platforms/cell/ |
D | Kconfig | 28 depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN 38 depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN 43 depends on PPC_IBM_CELL_BLADE && PCI_MSI 47 depends on PPC_CELL 52 depends on PPC_CELL 57 Units on machines implementing the Broadband Processor 67 depends on PPC_CELL_NATIVE 72 depends on CBE_RAS && PPC_IBM_CELL_BLADE 75 Support Pinhole Resetbutton on IBM Cell blades. 80 depends on PPC_IBM_CELL_BLADE && INPUT_EVDEV [all …]
|
/linux-4.4.14/drivers/cpufreq/ |
D | Kconfig.arm | 8 depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK 15 depends on ARM_BIG_LITTLE_CPUFREQ && OF 22 depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC 29 depends on SOC_EXYNOS5440 30 depends on HAVE_CLK && OF 43 depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR 53 depends on ARCH_HISI && CPUFREQ_DT 62 depends on ARCH_MXC 63 depends on REGULATOR_ANATOP 72 depends on ARCH_INTEGRATOR [all …]
|
D | Kconfig.powerpc | 3 depends on CBE_RAS && PPC_CELL 12 depends on CPU_FREQ_CBE 21 depends on PPC_MAPLE 23 This adds support for frequency switching on Maple 970FX 28 depends on ADB_PMU && PPC32 30 This adds support for frequency switching on Apple PowerBooks, 36 depends on PPC_PMAC && PPC64 38 This adds support for frequency switching on Apple iMac G5, 43 depends on PPC_PASEMI 46 This adds the support for frequency switching on PA Semi [all …]
|
/linux-4.4.14/drivers/s390/char/ |
D | Kconfig | 2 depends on S390 7 depends on CCW 13 prompt "Support for tty input/output on 3270 terminals" 14 depends on TN3270 && TTY 20 prompt "Support for fullscreen applications on 3270 terminals" 21 depends on TN3270 23 Include support for fullscreen applications on an IBM 3270 terminal. 27 prompt "Support for console on 3270 terminal" 28 depends on TN3270=y && TN3270_TTY=y 36 depends on CCW && TTY [all …]
|
/linux-4.4.14/drivers/clocksource/ |
D | Kconfig | 2 depends on !ARCH_USES_GETTIMEOFFSET 82 depends on (ARCH_NOMADIK || ARCH_U8500) 91 depends on CLKSRC_NOMADIK_MTU 97 depends on UX500_SOC_DB8500 100 Use the always on PRCMU Timer as clocksource 104 depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK) 107 Use the always on PRCMU Timer as sched_clock 111 depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST) 129 depends on GENERIC_SCHED_CLOCK 133 available on many OMAP-like platforms. [all …]
|
/linux-4.4.14/drivers/media/tuners/ |
D | Kconfig | 4 …depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SD… 19 …depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR… 23 depends on MEDIA_SUPPORT && I2C 31 depends on MEDIA_SUPPORT && I2C 40 depends on MEDIA_SUPPORT && I2C 47 depends on MEDIA_SUPPORT && I2C 54 depends on MEDIA_SUPPORT && I2C 62 depends on MEDIA_SUPPORT && I2C 69 depends on MEDIA_SUPPORT && I2C 76 depends on MEDIA_SUPPORT && SPI && VIDEO_V4L2 [all …]
|
/linux-4.4.14/arch/mips/jazz/ |
D | Kconfig | 3 depends on MACH_JAZZ 8 kernel that runs on these, say Y here. For details about Linux on 9 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at 14 depends on MACH_JAZZ 20 kernel that runs on these, say Y here. For details about Linux on 21 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at 26 depends on MACH_JAZZ 31 kernel that runs on these, say Y here. For details about Linux on 32 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
|
/linux-4.4.14/arch/arm/mach-omap2/ |
D | Kconfig | 2 depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 6 depends on ARCH_MULTI_V6 13 depends on ARCH_MULTI_V7 23 depends on ARCH_MULTI_V7 42 depends on ARCH_MULTI_V7 56 depends on ARCH_MULTI_V7 62 depends on ARCH_MULTI_V7 73 depends on ARCH_MULTI_V7 104 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 138 depends on SOC_OMAP5 || SOC_DRA7XX [all …]
|
/linux-4.4.14/drivers/video/logo/ |
D | Kconfig | 7 depends on FB || SGI_NEWPORT_CONSOLE 15 depends on FB=y 32 depends on BLACKFIN 37 depends on BLACKFIN 42 depends on MACH_DECSTATION || ALPHA 47 depends on MAC 52 depends on PARISC 57 depends on SGI_IP22 || SGI_IP27 || SGI_IP32 62 depends on SPARC 67 depends on SUPERH [all …]
|
/linux-4.4.14/drivers/dma/ |
D | Kconfig | 7 depends on HAS_DMA 18 depends on DMADEVICES != n 25 depends on DMADEVICES_DEBUG != n 51 depends on ACPI 55 depends on OF 61 depends on ARM_AMBA 70 depends on 440SPe || 440SP 80 depends on ARCH_AT91 87 depends on ARCH_AT91 94 depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_SOCFPGA || COMPILE_TEST [all …]
|
/linux-4.4.14/arch/arm/mach-pxa/ |
D | Kconfig | 103 Say Y here if you intend to run this kernel on a Cogent 108 depends on MACH_CSB726 134 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" 142 Say Y here if you intend to run this kernel on 147 depends on ARCH_GUMSTIX 183 depends on TRIZEPS_PXA 189 depends on TRIZEPS_PXA 196 depends on TRIZEPS_PXA 230 depends on MACH_PCM027 233 prompt "display on pcm990" [all …]
|
/linux-4.4.14/drivers/media/i2c/ |
D | Kconfig | 9 depends on I2C && RC_CORE 31 depends on VIDEO_V4L2 && I2C 33 Support for several audio decoder chips found on some bt8xx boards: 36 Microchip: pic16c54 based design on ProVideo PV951 board. 43 depends on VIDEO_V4L2 && I2C 45 Support for tda7432 audio decoder chip found on some bt8xx boards. 52 depends on I2C 54 Support for tda9840 audio decoder chip found on some Zoran boards. 61 depends on I2C 63 Support for tea6415c audio decoder chip found on some bt8xx boards. [all …]
|
/linux-4.4.14/arch/x86/ |
D | Kconfig.cpu | 9 that can run on all supported x86 CPU types (albeit not 16 The kernel will not necessarily run on earlier architectures than 17 the one you have chosen, e.g. a Pentium optimized kernel will run on 18 a PPro, but not necessarily on a i486. 47 - "Generic-x86-64" for a kernel which runs on any x86-64 CPU. 54 depends on X86_32 61 depends on X86_32 69 depends on X86_32 76 depends on X86_32 83 depends on X86_32 [all …]
|
D | Kconfig | 11 depends on !64BIT 15 depends on 64BIT 158 depends on KPROBES || PERF_EVENTS || UPROBES 162 depends on PERF_EVENTS && CPU_SUP_INTEL && PCI 191 depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB 198 depends on ISA_DMA_API 202 depends on BUG 213 depends on ISA_DMA_API 262 depends on KASAN 267 depends on INTEL_IOMMU && ACPI [all …]
|
/linux-4.4.14/drivers/gpu/drm/imx/ |
D | Kconfig | 8 depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM) && HAVE_DMA_ATTRS 9 depends on IMX_IPUV3_CORE 16 depends on DRM_IMX 25 depends on DRM_IMX 30 depends on DRM_IMX 34 found on i.MX53 processors. 38 depends on DRM_IMX && MFD_SYSCON 42 found on i.MX53 and i.MX6 processors. 46 depends on DRM_IMX 47 depends on IMX_IPUV3_CORE [all …]
|
/linux-4.4.14/sound/soc/tegra/ |
D | Kconfig | 2 tristate "SoC Audio for the Tegra System-on-Chip" 3 depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST 4 depends on COMMON_CLK 5 depends on RESET_CONTROLLER 9 Say Y or M here if you want support for SoC audio on Tegra. 13 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC 23 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC 31 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC 40 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC 49 depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC [all …]
|
/linux-4.4.14/drivers/char/agp/ |
D | Kconfig | 3 depends on ALPHA || IA64 || PARISC || PPC || X86 4 depends on PCI 19 write-combining with MTRR support on the AGP bus. Without it, OpenGL 31 depends on AGP && X86_32 34 X on the following ALi chipsets. The supported chipsets 46 depends on AGP && X86_32 49 X on the ATI RadeonIGP family of chipsets. 53 depends on AGP && X86_32 56 X on AMD Irongate, 761, and 762 chipsets. 59 tristate "AMD Opteron/Athlon64 on-CPU GART support" [all …]
|
/linux-4.4.14/drivers/macintosh/ |
D | Kconfig | 4 depends on PPC || MAC || X86 16 depends on MAC || (PPC_PMAC && PPC32) 26 depends on ADB && MAC 35 depends on ADB && MAC && BROKEN 43 depends on ADB && MAC 52 depends on ADB && MAC 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 79 depends on PPC_PMAC 83 control system power, and battery charging on the portable models. 85 the keyboard and mouse on some machines, as well as the non-volatile [all …]
|
/linux-4.4.14/arch/cris/arch-v10/ |
D | Kconfig | 8 depends on ETRAX_ARCH_V10 && ETRAX100LX 13 depends on ETRAX_ARCH_V10 19 depends on ETRAX_ARCH_V10 29 separately. Select this if the LEDs are on port PA. Some products 30 put the leds on PB or a memory-mapped latch (CSP0) instead. 39 separately. Select this if the LEDs are on port PB. Some products 40 put the leds on PA or a memory-mapped latch (CSP0) instead. 49 separately. Select this if the LEDs are on a memory-mapped latch 51 Some products put the leds on PA or PB instead. 62 depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS [all …]
|
/linux-4.4.14/drivers/video/backlight/ |
D | Kconfig | 9 backlight and the LCD panel on some platforms, for example on PDAs. 26 select the proper drivers which depend on this option. 32 depends on SPI_MASTER && PXA_SHARPSL && BACKLIGHT_CLASS_DEVICE 34 Say y here to support the LCD panels usually found on SHARP 39 depends on SPI_MASTER 40 depends on GPIOLIB || COMPILE_TEST 47 depends on SPI_MASTER 48 depends on GPIOLIB || COMPILE_TEST 55 depends on SPI_MASTER 62 The LTV350QV panel is present on all ATSTK1000 boards. [all …]
|
/linux-4.4.14/drivers/iommu/ |
D | Kconfig | 7 depends on MMU 12 remap DMA requests and/or remap interrupts from other devices on the 26 depends on HAS_DMA && (ARM || ARM64 || COMPILE_TEST) 35 depends on IOMMU_IO_PGTABLE_LPAE 49 depends on OF && IOMMU_API 54 depends on NEED_SG_DMA_LENGTH 60 depends on PPC32 61 depends on PPC_E500MC || COMPILE_TEST 65 Freescale PAMU support. PAMU is the IOMMU present on Freescale QorIQ platforms. 72 depends on ARM [all …]
|
/linux-4.4.14/drivers/pinctrl/nomadik/ |
D | Kconfig | 5 depends on AB8500_CORE 12 depends on PINCTRL_ABX500 && ARCH_U8500 16 depends on PINCTRL_ABX500 && ARCH_U8500 20 depends on PINCTRL_ABX500 && ARCH_U8500 24 depends on PINCTRL_ABX500 && ARCH_U8500 32 depends on ARCH_U8500 || ARCH_NOMADIK 33 depends on OF && GPIOLIB 41 depends on PINCTRL_NOMADIK && ARCH_NOMADIK 45 depends on PINCTRL_NOMADIK && ARCH_U8500 49 depends on PINCTRL_NOMADIK && ARCH_U8500
|
/linux-4.4.14/drivers/net/ethernet/amd/ |
D | Kconfig | 8 depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ 24 depends on ZORRO 35 depends on PCI 47 depends on ISA && ISA_DMA_API && !ARM 57 depends on PCI 69 depends on ZORRO 79 depends on ARM && ARCH_EBSA110 87 depends on ATARI 90 on the AMD LANCE chipset: RieblCard (with or without battery), or 95 depends on MACH_DECSTATION [all …]
|
/linux-4.4.14/drivers/isdn/hisax/ |
D | Kconfig | 8 This is a driver supporting the Siemens chipset on various 34 depends on HISAX_EURO 37 upper level of the isdn code on each AOCD (Advice Of Charge, During 39 on each AOCE (Advice Of Charge, at the End of the call -- 45 depends on HISAX_EURO 52 depends on HISAX_EURO 59 depends on HISAX_EURO 77 Enable this if you like to use ISDN in US on a NI1 basic rate 91 depends on ISA 96 See <file:Documentation/isdn/README.HiSax> on how to configure it [all …]
|
/linux-4.4.14/drivers/media/i2c/soc_camera/ |
D | Kconfig | 5 depends on SOC_CAMERA && I2C 11 depends on SOC_CAMERA && I2C 18 depends on SOC_CAMERA && I2C 25 depends on SOC_CAMERA && I2C 31 depends on SOC_CAMERA && I2C 37 depends on SOC_CAMERA && I2C 43 depends on SOC_CAMERA && I2C 49 depends on SOC_CAMERA && I2C 55 depends on SOC_CAMERA && I2C 61 depends on SOC_CAMERA && I2C [all …]
|
/linux-4.4.14/arch/blackfin/mach-bf527/ |
D | Kconfig | 3 depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) 32 depends on BF527_SPORT0_PORTG 93 depends on BFIN_HYSTERESIS_CONTROL 95 bool "Enable Hysteresis on PORTF {0...7}" 97 bool "Enable Hysteresis on PORTF {8, 9}" 99 bool "Enable Hysteresis on PORTF 10" 101 bool "Enable Hysteresis on PORTF 11" 103 bool "Enable Hysteresis on PORTF {12, 13}" 105 bool "Enable Hysteresis on PORTF {14, 15}" 109 depends on BFIN_HYSTERESIS_CONTROL [all …]
|
/linux-4.4.14/arch/mn10300/ |
D | Kconfig | 96 compiled. It affects the on-chip peripherals catered for. 100 depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305 108 depends on MN10300_UNIT_ASB2364 125 depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 130 depends on FPU && !SMP 133 task's thread struct. This is useful if most tasks on the system 138 This can't be so easily used on SMP as the process that owns the FPU 139 state on a CPU may be currently running on another CPU, so for the 158 the TBR register. It must be on 16MiB address boundary. 175 depends on SMP [all …]
|
D | Kconfig.debug | 7 depends on DEBUG_KERNEL 12 "Ok, booting the kernel.\n" on console. 15 bool "Run tests on the misalignment handler" 16 depends on DEBUG_KERNEL 25 depends on DEBUG_KERNEL 35 depends on DEBUG_KERNEL && DEPRECATED 50 depends on GDBSTUB 58 depends on GDBSTUB && !SMP && !PREEMPT 61 kernel. This doesn't work very well on SMP or preemptible kernels as 66 depends on GDBSTUB [all …]
|
/linux-4.4.14/security/integrity/ima/ |
D | Kconfig | 32 depends on IMA 42 depends on IMA && AUDIT && (SECURITY_SELINUX || SECURITY_SMACK) 50 depends on IMA 70 depends on IMA 78 depends on IMA 87 depends on CRYPTO_SHA1 91 depends on CRYPTO_SHA256 && !IMA_TEMPLATE 95 depends on CRYPTO_SHA512 && !IMA_TEMPLATE 99 depends on CRYPTO_WP512 && !IMA_TEMPLATE 104 depends on IMA [all …]
|
/linux-4.4.14/sound/soc/omap/ |
D | Kconfig | 3 depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST) 17 depends on SND_OMAP_SOC 32 depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C 33 depends on OMAP_MUX 37 Say Y if you want to add support for SoC audio on Nokia N810. 41 depends on SND_OMAP_SOC && ARM && I2C 45 depends on GPIOLIB 47 Say Y if you want to add support for SoC audio on Nokia N900 52 depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY 57 a handset and a speakerphone found on Amstrad E3 (Delta) videophone. [all …]
|
/linux-4.4.14/lib/fonts/ |
D | Kconfig | 12 depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE 25 depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE 48 depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE 56 depends on FRAMEBUFFER_CONSOLE 64 depends on FRAMEBUFFER_CONSOLE 72 depends on FRAMEBUFFER_CONSOLE 80 depends on !SPARC && FONTS 84 depends on !SPARC && FONTS 86 Medium-size console font. Suitable for framebuffer consoles on 92 depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC) [all …]
|
/linux-4.4.14/drivers/leds/trigger/ |
D | Kconfig | 3 depends on LEDS_CLASS 13 depends on LEDS_TRIGGERS 24 depends on LEDS_TRIGGERS 27 controlled via sysfs. It's useful to notify the user on 29 or on dense events, where this blinks the LED at constant rate if 38 depends on IDE_GD_ATA 39 depends on LEDS_TRIGGERS 46 depends on LEDS_TRIGGERS 55 depends on LEDS_TRIGGERS 58 turn off and on when the display is blanked and unblanked. [all …]
|
/linux-4.4.14/drivers/net/ethernet/stmicro/stmmac/ |
D | Kconfig | 3 depends on HAS_IOMEM && HAS_DMA 11 Synopsys IP Core and only tested on the STMicroelectronics 18 depends on STMMAC_ETH 23 This is the driver used on several SoCs: 43 depends on OF 50 acceleration features available on this SoC. Network devices 56 depends on OF 64 depends on OF 66 Support for Ethernet controller on Amlogic Meson SoCs. 75 depends on OF [all …]
|
/linux-4.4.14/arch/cris/arch-v32/drivers/ |
D | Kconfig | 5 depends on ETRAX_ARCH_V32 && NETDEVICES 13 depends on ETRAX_ETHERNET 23 depends on ETRAX_ARCH_V32 32 depends on ETRAXFS_SERIAL 38 depends on ETRAX_RS485 45 depends on ETRAXFS_SERIAL 48 Normally you want this on. You can control what DMA channels to use 54 depends on ETRAXFS_SERIAL 60 depends on ETRAXFS_SERIAL 66 depends on ETRAXFS_SERIAL [all …]
|
/linux-4.4.14/drivers/thermal/ |
D | Kconfig | 21 depends on HWMON=y || HWMON=THERMAL 35 depends on OF 43 based on device tree. 75 devices based on their 'contribution' to a zone. The 89 Select this if you want to control temperature based on 91 operate on cooling devices that implement the power API. 113 used for fans without throttling. Some fan drivers depend on this 129 depends on CPU_FREQ 130 depends on THERMAL_OF 142 depends on COMMON_CLK [all …]
|
/linux-4.4.14/drivers/media/platform/davinci/ |
D | Kconfig | 3 depends on VIDEO_V4L2 4 depends on ARCH_DAVINCI || COMPILE_TEST 5 depends on HAS_DMA 11 This module is used for display on TI DM6467/DA850/OMAPL138 19 depends on VIDEO_V4L2 20 depends on ARCH_DAVINCI || COMPILE_TEST 21 depends on HAS_DMA 25 This module is used for capture on TI DM6467/DA850/OMAPL138 33 depends on VIDEO_V4L2 34 depends on ARCH_DAVINCI || COMPILE_TEST [all …]
|
/linux-4.4.14/drivers/media/common/siano/ |
D | Kconfig | 7 depends on DVB_CORE && HAS_DMA 8 depends on !RC_CORE || RC_CORE 9 depends on SMS_USB_DRV || SMS_SDIO_DRV 14 depends on SMS_SIANO_MDTV && RC_CORE 15 depends on SMS_USB_DRV || SMS_SDIO_DRV 16 depends on MEDIA_COMMON_OPTIONS 23 depends on SMS_SIANO_MDTV 24 depends on DEBUG_FS 25 depends on SMS_USB_DRV = SMS_SDIO_DRV
|
/linux-4.4.14/arch/arm/mach-davinci/ |
D | Kconfig | 35 depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR 37 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 42 depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR 60 depends on ARCH_DAVINCI_DA8XX 69 depends on ARCH_DAVINCI_DM644x 78 depends on ARCH_DAVINCI_DM644x 87 depends on ARCH_DAVINCI_DM644x 95 depends on ARCH_DAVINCI_DM355 102 depends on ARCH_DAVINCI_DM355 110 depends on ARCH_DAVINCI_DM646x [all …]
|
/linux-4.4.14/sound/soc/blackfin/ |
D | Kconfig | 3 depends on BLACKFIN 14 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI 24 tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards" 25 depends on SND_BF5XX_I2S && I2C 34 tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards" 35 depends on SND_BF5XX_I2S && I2C 44 first SPORT port on the BF5XX board. 47 tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards" 48 depends on SND_BF5XX_I2S && I2C 57 first SPORT port on the BF5XX board. [all …]
|
/linux-4.4.14/scripts/coccinelle/misc/ |
D | boolinit.cocci | 2 /// comparisons. Based on contributions from Joe Perches, Rusty Russell 16 @depends on patch@ 48 @depends on patch disable is_zero, isnt_zero@ 66 @depends on patch@ 81 @r1 depends on !patch@ 104 @r2 depends on !patch disable is_zero, isnt_zero@ 119 @r3 depends on !patch@ 132 @script:python depends on org@ 138 @script:python depends on org@ 144 @script:python depends on org@ [all …]
|
D | warn.cocci | 23 @r1 depends on context || report || org@ 30 @script:python depends on org@ 36 @script:python depends on report@ 43 @ok1 depends on patch@ 53 @depends on patch@ 72 @r2 depends on context || report || org@ 79 @script:python depends on org@ 85 @script:python depends on report@ 92 @ok2 depends on patch@ 102 @depends on patch@
|
/linux-4.4.14/drivers/pinctrl/freescale/ |
D | Kconfig | 13 depends on SOC_IMX1 20 depends on SOC_IMX21 27 depends on SOC_IMX27 35 depends on OF 36 depends on SOC_IMX25 43 depends on SOC_IMX35 50 depends on SOC_IMX50 57 depends on SOC_IMX51 64 depends on SOC_IMX53 71 depends on SOC_IMX6Q [all …]
|
/linux-4.4.14/drivers/net/wireless/ath/ath6kl/ |
D | Kconfig | 3 depends on CFG80211 5 This module adds core support for wireless adapters based on 15 depends on ATH6KL 16 depends on MMC 18 This module adds support for wireless adapters based on 26 depends on ATH6KL 27 depends on USB 29 This module adds support for wireless adapters based on 30 Atheros AR6004 chipset and chipsets based on it running over 36 depends on ATH6KL [all …]
|
/linux-4.4.14/drivers/net/ethernet/i825xx/ |
D | Kconfig | 8 depends on NET_VENDOR_INTEL 21 depends on ARM && ARCH_ACORN 28 depends on BVME6000 30 This is the driver for the Ethernet interface on BVME4000 and 37 depends on GSC 44 depends on MVME16x 46 This is the driver for the Ethernet interface on the Motorola 53 depends on SNI_RM 55 Say Y here to support the on-board Intel 82596 ethernet controller 59 bool "Sun3 on-board Intel 82586 support" [all …]
|
/linux-4.4.14/drivers/media/rc/ |
D | Kconfig | 3 depends on MEDIA_RC_SUPPORT 4 depends on INPUT 11 depends on RC_CORE 17 depends on RC_CORE 28 depends on RC_CORE 29 depends on LIRC 39 depends on RC_CORE 49 depends on RC_CORE 59 depends on RC_CORE 69 depends on RC_CORE [all …]
|
/linux-4.4.14/drivers/pcmcia/ |
D | Kconfig | 39 depends on PCMCIA 47 subsystem, instead of relying on cardmgr from pcmcia-cs to do so. 53 depends on PCI 70 depends on PCI 87 depends on YENTA 92 depends on YENTA 97 depends on YENTA 102 depends on YENTA_TI && CARDBUS 107 depends on YENTA 111 depends on PCMCIA && PCI [all …]
|
/linux-4.4.14/net/netfilter/ |
D | Kconfig | 2 depends on NET && INET && NETFILTER 17 depends on NETFILTER_ADVANCED 25 depends on NETFILTER_ADVANCED 64 depends on NETFILTER_ADVANCED 73 depends on NETWORK_SECMARK 86 depends on NETFILTER_ADVANCED 87 depends on NETFILTER_XT_TARGET_CT 100 depends on PROC_FS 109 depends on NETFILTER_ADVANCED 119 depends on NETFILTER_ADVANCED [all …]
|
/linux-4.4.14/drivers/usb/phy/ |
D | Kconfig | 14 depends on AB8500_CORE 23 depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM 30 depends on I2C && ARCH_OMAP_OTG 31 depends on USB 45 depends on ARCH_KEYSTONE || COMPILE_TEST 65 depends on ARM || COMPILE_TEST 82 depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS 84 Enable this to support the USB OTG transceiver on TWL6030 93 depends on GPIOLIB || COMPILE_TEST 103 depends on ARCH_OMAP_OTG && EXTCON [all …]
|
D | am35x-phy-control.h | 5 void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on); 6 void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on); 9 static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id, bool on) in phy_ctrl_power() argument 11 phy_ctrl->phy_power(phy_ctrl, id, on); in phy_ctrl_power() 14 static inline void phy_ctrl_wkup(struct phy_control *phy_ctrl, u32 id, bool on) in phy_ctrl_wkup() argument 16 phy_ctrl->phy_wkup(phy_ctrl, id, on); in phy_ctrl_wkup()
|
/linux-4.4.14/fs/nfs/ |
D | Kconfig | 3 depends on INET && FILE_LOCKING && MULTIUSER 8 Choose Y here if you want to access files residing on other 27 system on NFS" below. You cannot compile this file system as a 34 depends on NFS_FS 44 depends on NFS_FS 54 depends on NFS_V3 59 applications on NFS clients to manipulate POSIX Access Control 60 Lists on files residing on NFS servers. NFS servers enforce 61 ACLs on local files whether this protocol is available or not. 65 applications to access and modify ACLs on files on the server. [all …]
|
/linux-4.4.14/drivers/pinctrl/vt8500/ |
D | Kconfig | 14 depends on ARCH_WM8505 17 Say yes here to support the gpio/pin control module on 22 depends on ARCH_WM8505 25 Say yes here to support the gpio/pin control module on 30 depends on ARCH_WM8505 33 Say yes here to support the gpio/pin control module on 38 depends on ARCH_WM8750 41 Say yes here to support the gpio/pin control module on 46 depends on ARCH_WM8850 49 Say yes here to support the gpio/pin control module on
|
/linux-4.4.14/arch/powerpc/ |
D | Kconfig.debug | 19 depends on !PPC_DISABLE_WERROR 23 bool "Do extra type checking on mm types" 26 This option turns on extra type checking for some mm related types. 41 depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS 55 depends on DEBUG_FS 68 depends on DEBUG_KERNEL 73 depends on DEBUG_KERNEL 78 depends on DEBUG_KERNEL 83 depends on DEBUG_KERNEL 87 Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise [all …]
|
/linux-4.4.14/drivers/char/hw_random/ |
D | Kconfig | 27 depends on HAS_IOMEM 32 the default FPGA bitstream on the TS-7800 has such functionality. 41 depends on (X86 || IA64) && PCI 45 Generator hardware found on Intel i8xx-based motherboards. 54 depends on (X86 || PPC_MAPLE) && PCI 58 Generator hardware found on AMD 76x-based motherboards. 67 depends on ARCH_AT91 && HAVE_CLK && OF 71 Generator hardware found on Atmel AT91 devices. 80 depends on BCM63XX 84 Generator hardware found on the Broadcom BCM63xx SoCs. [all …]
|
/linux-4.4.14/net/sunrpc/ |
D | Kconfig | 3 depends on MULTIUSER 8 depends on MULTIUSER 12 depends on SUNRPC 16 depends on SUNRPC 20 depends on SUNRPC && CRYPTO 21 depends on CRYPTO_MD5 && CRYPTO_DES && CRYPTO_CBC && CRYPTO_CTS 22 depends on CRYPTO_ECB && CRYPTO_HMAC && CRYPTO_SHA1 && CRYPTO_AES 23 depends on CRYPTO_ARC4 39 depends on SUNRPC && SYSCTL 43 that is be used by the 'rpcdebug' utility to turn on or off [all …]
|
/linux-4.4.14/Documentation/hwmon/ |
D | max6639 | 44 temp1_max_alarm R Alarm on THERM temperature on channel 1 45 temp2_max_alarm R Alarm on THERM temperature on channel 2 46 temp1_crit_alarm R Alarm on ALERT temperature on channel 1 47 temp2_crit_alarm R Alarm on ALERT temperature on channel 2 48 temp1_emergency_alarm R Alarm on OT temperature on channel 1 49 temp2_emergency_alarm R Alarm on OT temperature on channel 2
|
/linux-4.4.14/scripts/coccinelle/api/ |
D | ptr_ret.cocci | 19 @depends on patch@ 26 @depends on patch@ 33 @depends on patch@ 40 @r1 depends on !patch@ 47 @r2 depends on !patch@ 54 @r3 depends on !patch@ 61 @script:python depends on org@ 68 @script:python depends on org@ 74 @script:python depends on org@ 80 @script:python depends on report@ [all …]
|
D | vma_pages.cocci | 2 /// Use vma_pages function on vma object instead of explicit computation. 6 // Comment: Based on resource_size.cocci 17 @r_context depends on context && !patch && !org && !report@ 27 @r_patch depends on !context && patch && !org && !report@ 38 @r_org depends on !context && !patch && (org || report)@ 45 @script:python depends on report@ 50 msg="WARNING: Consider using vma_pages helper on %s" % (x) 53 @script:python depends on org@ 58 msg="WARNING: Consider using vma_pages helper on %s" % (x)
|
D | platform_no_drv_owner.cocci | 25 @fix1 depends on match1 && patch && !context && !org && !report@ 34 @fix1_i2c depends on match1 && patch && !context && !org && !report@ 56 @fix2 depends on match2 && patch && !context && !org && !report@ 65 @fix2_i2c depends on match2 && patch && !context && !org && !report@ 76 @fix1_context depends on match1 && !patch && (context || org || report)@ 87 @fix1_i2c_context depends on match1 && !patch && (context || org || report)@ 98 @fix2_context depends on match2 && !patch && (context || org || report)@ 109 @fix2_i2c_context depends on match2 && !patch && (context || org || report)@ 122 @script:python fix1_org depends on org@ 129 @script:python fix1_i2c_org depends on org@ [all …]
|
/linux-4.4.14/drivers/gpu/drm/exynos/ |
D | Kconfig | 3 depends on OF && DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM) 18 depends on EXYNOS_IOMMU && ARM_DMA_USE_IOMMU 25 depends on !FB_S3C 32 bool "DECON on Exynos5433" 37 bool "DECON on Exynos7" 38 depends on !FB_S3C 45 depends on !VIDEO_SAMSUNG_S5P_TV 58 depends on DRM_EXYNOS_FIMD 66 depends on DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON 75 depends on DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON [all …]
|
/linux-4.4.14/sound/soc/davinci/ |
D | Kconfig | 3 depends on ARCH_DAVINCI 8 depends on SOC_AM33XX || SOC_AM43XX || ARCH_DAVINCI 22 depends on SND_OMAP_SOC || SND_EDMA_SOC 40 depends on SND_EDMA_SOC && SOC_AM33XX && I2C 43 Say Y or M if you want to add support for SoC audio on AM33XX 50 depends on SND_EDMA_SOC && I2C 51 depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM 54 Say Y if you want to add support for SoC audio on TI 59 depends on SND_DAVINCI_SOC_EVM 60 depends on MACH_DAVINCI_DM365_EVM [all …]
|
/linux-4.4.14/drivers/media/platform/s5p-tv/ |
D | Kconfig | 11 depends on PM 12 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 22 depends on VIDEO_V4L2 23 depends on I2C 24 depends on VIDEO_SAMSUNG_S5P_TV 35 depends on VIDEO_SAMSUNG_S5P_HDMI 42 depends on VIDEO_DEV && VIDEO_V4L2 && I2C 43 depends on VIDEO_SAMSUNG_S5P_TV 52 depends on VIDEO_DEV && VIDEO_V4L2 && I2C 53 depends on VIDEO_SAMSUNG_S5P_TV [all …]
|
/linux-4.4.14/drivers/hid/ |
D | Kconfig | 5 depends on INPUT 9 depends on INPUT 30 depends on HID 40 depends on HID 47 event interface on /dev/hidraw. 52 to work on raw hid events when they want to, and avoid using transport-specific 59 depends on HID 65 corresponding HID Device Driver or provides input devices on top of your 80 depends on HID 83 Support for generic devices on the HID bus. This includes most [all …]
|
/linux-4.4.14/drivers/pwm/ |
D | Kconfig | 37 depends on AB8500_CORE && ARCH_U8500 46 depends on ARCH_AT91 || AVR32 55 depends on MFD_ATMEL_HLCDC 56 depends on HAVE_CLK 67 depends on ATMEL_TCLIB && OF 79 depends on ARCH_BCM_MOBILE 88 depends on ARCH_BCM2835 97 depends on ARCH_BERLIN 106 depends on BFIN_GPTIMERS 115 depends on ARCH_BRCMSTB || BMIPS_GENERIC [all …]
|
/linux-4.4.14/drivers/remoteproc/ |
D | Kconfig | 6 depends on HAS_DMA 14 depends on HAS_DMA 15 depends on ARCH_OMAP4 || SOC_OMAP5 16 depends on OMAP_IOMMU 23 and DSP on OMAP4) via the remote processor framework. 25 Currently only supported on OMAP4. 28 use-cases to run on your platform (multimedia codecs are 36 depends on HAS_DMA 46 depends on SOC_AM33XX || SOC_AM43XX 49 Say y here to support Wakeup M3 remote processor on TI AM33xx [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/mmc/ |
D | tmio_mmc.txt | 14 "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC 15 "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC 16 "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC 17 "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC 18 "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC 19 "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC 20 "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC 21 "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC 22 "renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC 23 "renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC [all …]
|
/linux-4.4.14/drivers/gpu/drm/msm/ |
D | Kconfig | 4 depends on DRM 5 depends on ARCH_QCOM || (ARM && COMPILE_TEST) 6 depends on OF && COMMON_CLK 19 depends on DRM_MSM 24 logging can be switched on via msm.reglog=y module param. 28 depends on DRM_MSM 38 depends on DRM_MSM_DSI && COMMON_CLK 46 depends on DRM_MSM_DSI 49 Choose this option if the 28nm DSI PHY is used on the platform. 53 depends on DRM_MSM_DSI [all …]
|
/linux-4.4.14/fs/nfsd/ |
D | Kconfig | 3 depends on INET 4 depends on FILE_LOCKING 9 depends on MULTIUSER 12 files residing on this system using Sun's Network File System 26 available to clients mounting the NFS server on this system. 34 depends on NFSD 38 depends on NFSD 47 depends on NFSD_V3 52 This protocol extension allows applications on NFS clients to 53 manipulate POSIX Access Control Lists on files residing on NFS [all …]
|
/linux-4.4.14/arch/arm/mach-omap1/ |
D | Kconfig | 6 depends on ARCH_OMAP1 9 depends on ARCH_OMAP1 16 depends on ARCH_OMAP1 22 depends on ARCH_OMAP1 29 depends on ARCH_OMAP1 35 depends on ARCH_OMAP1 39 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) 46 depends on ARCH_OMAP1 && ARCH_OMAP16XX 53 depends on ARCH_OMAP1 && ARCH_OMAP16XX 60 depends on ARCH_OMAP850 [all …]
|
/linux-4.4.14/drivers/i2c/busses/ |
D | Kconfig | 6 depends on HAS_IOMEM 9 depends on PCI 13 depends on PCI 16 Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB 25 depends on PCI 28 Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB 37 depends on PCI 47 depends on PCI 58 tristate "SMBus multiplexing on the Tyan S4882" 59 depends on I2C_AMD756 && X86 [all …]
|
/linux-4.4.14/drivers/cpuidle/ |
D | Kconfig.arm | 16 depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS 17 depends on MCPM && !ARM64 29 depends on ARCH_CLPS711X && !ARM64 || COMPILE_TEST 31 Select this to enable cpuidle on Cirrus Logic CLPS711X SOCs. 35 depends on ARM_PSCI && !ARM64 38 Select this to enable cpuidle on Calxeda processors. 42 depends on MACH_KIRKWOOD && !ARM64 48 depends on ARCH_ZYNQ && !ARM64 50 Select this to enable cpuidle on Xilinx Zynq processors. 54 depends on ARCH_U8500 && !ARM64 [all …]
|
/linux-4.4.14/drivers/dma/sh/ |
D | Kconfig | 15 depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST 16 depends on !SUPERH || SH_DMA 17 depends on !SH_DMA_API 29 depends on SH_DMAE_BASE 37 depends on ARCH_R8A73A4 38 depends on OF 44 depends on ARCH_SHMOBILE || COMPILE_TEST 52 depends on SH_DMAE_BASE 58 depends on ARCH_SHMOBILE || COMPILE_TEST 67 depends on SH_DMAE_BASE
|
/linux-4.4.14/drivers/video/fbdev/ |
D | Kconfig | 42 depends on FB 52 something on your display, try setting this to N. Matrox cards in 61 depends on FB 68 depends on FB 76 depends on FB 85 depends on FB 94 depends on FB 103 depends on FB 106 Allow generic frame-buffer functions to work on displays with 1, 2 112 depends on FB [all …]
|
/linux-4.4.14/drivers/clk/ |
D | Kconfig | 26 depends on COMMON_CLK 30 depends on MFD_WM831X 42 depends on MFD_MAX77686 49 depends on MFD_MAX77686 56 depends on MFD_RK808 60 clocked at 32KHz each. Clkout1 is always on, Clkout2 can off 65 depends on ARM_SCPI_PROTOCOL || COMPILE_TEST 75 depends on I2C 84 depends on I2C 85 depends on OF [all …]
|
/linux-4.4.14/drivers/pinctrl/spear/ |
D | Kconfig | 9 depends on OF 16 depends on ARCH_SPEAR3XX 21 depends on MACH_SPEAR300 26 depends on MACH_SPEAR310 32 depends on MACH_SPEAR320 38 depends on MACH_SPEAR1310 44 depends on MACH_SPEAR1340 50 depends on GPIOLIB && PINCTRL_SPEAR 53 Say yes here to support PLGPIO controller on ST Microelectronics SPEAr
|
/linux-4.4.14/drivers/video/fbdev/omap2/displays-new/ |
D | Kconfig | 2 depends on OMAP2_DSS 23 depends on I2C 44 depends on BACKLIGHT_CLASS_DEVICE 50 depends on SPI && BACKLIGHT_CLASS_DEVICE 52 This is the LCD panel used on Nokia N900 56 depends on SPI 58 LCD Panel used on the Gumstix Overo Palo35 62 depends on BACKLIGHT_CLASS_DEVICE 68 depends on SPI 74 depends on SPI [all …]
|
/linux-4.4.14/arch/sh/mm/ |
D | Kconfig | 8 depends on !CPU_SH2 12 boot on these systems, this option must not be set. 15 turning this off will boot the kernel on these machines with the 61 value on any of the known systems will only lead to disaster. 68 be overridden as normal by the 'mem=' argument on the kernel command 77 depends on SUPERH32 86 depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP 96 depends on (CPU_SHX2 || CPU_SHX3) && MMU 100 depends on MMU && (CPU_SH3 || CPU_SH4) 113 depends on MMU && SYS_SUPPORTS_NUMA [all …]
|
/linux-4.4.14/arch/blackfin/ |
D | Kconfig | 49 depends on BUG 238 depends on BF561 250 depends on SMP 255 depends on SMP 280 depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) 284 depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) 288 depends on (BF51x || BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM)) 292 depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) 296 depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539 || BF54x) 300 depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539) [all …]
|
/linux-4.4.14/sound/soc/codecs/ |
D | Kconfig | 15 depends on COMPILE_TEST 255 depends on I2C 319 depends on SPI_MASTER 329 depends on I2C 336 depends on I2C 346 depends on I2C 356 depends on I2C 363 depends on I2C 368 depends on I2C && INPUT 372 depends on I2C && INPUT [all …]
|
/linux-4.4.14/drivers/input/touchscreen/ |
D | Kconfig | 16 depends on INPUT 20 depends on MFD_88PM860X 32 depends on SPI_MASTER 33 depends on HWMON = n || HWMON 41 on your board, you will also get hwmon interfaces for the voltage 42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip. 51 depends on SPI_MASTER 75 depends on TOUCHSCREEN_AD7879 && I2C 84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER 95 depends on I2C && OF [all …]
|
/linux-4.4.14/drivers/scsi/arm/ |
D | Kconfig | 6 depends on ARCH_ACORN && SCSI 14 depends on SCSI_ACORNSCSI_3 16 Say Y here to enable tagged queuing support on the Acorn SCSI card. 25 depends on SCSI_ACORNSCSI_3 28 targets on the Acorn SCSI card. 35 depends on ARCH_ACORN && SCSI 39 HD discs from the then new A5000 on earlier models. This interface 40 was either sold on its own or with an integral SCSI controller. 41 Technical details on this NCR53c94-based device are available at 47 depends on ARCH_ACORN && SCSI [all …]
|
/linux-4.4.14/arch/mips/sibyte/ |
D | Kconfig | 82 depends on SIBYTE_SB1xxx_SOC 86 depends on SIBYTE_SB1250 93 depends on SIBYTE_SB1250 100 depends on SIBYTE_SB1250 107 depends on SIBYTE_BCM112X 112 depends on SIBYTE_BCM112X 129 depends on SIBYTE_SB1xxx_SOC 132 bool "Stall (rather than panic) on fatal cache error" 133 depends on SIBYTE_SB1xxx_SOC 137 depends on SIBYTE_SB1xxx_SOC [all …]
|
/linux-4.4.14/drivers/net/ethernet/freescale/ |
D | Kconfig | 8 depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \ 24 depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \ 31 controller on some Motorola ColdFire and Freescale i.MX processors. 35 depends on PPC_MPC52xx && PPC_BESTCOMM 40 This option enables support for the MPC5200's on-chip 46 depends on FEC_MPC52xx 69 This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and 70 on the FMan mEMAC (which supports both Clauses 22 and 45) 74 depends on QUICC_ENGINE 79 which is available on some Freescale SOCs. [all …]
|
/linux-4.4.14/drivers/input/keyboard/ |
D | Kconfig | 17 depends on PMIC_ADP5520 20 on Analog Devices ADP5520 PMICs. 27 depends on I2C 37 depends on I2C 47 depends on AMIGA 49 Say Y here if you are running Linux on any AMIGA and have a keyboard 60 depends on ATARI 63 Say Y here if you are running Linux on any Atari and have a keyboard 89 depends on PARISC && KEYBOARD_ATKBD 100 depends on KEYBOARD_ATKBD_HP_KEYCODES [all …]
|
/linux-4.4.14/drivers/watchdog/ |
D | Kconfig | 15 on-line as fast as possible after a lock-up. There's both a watchdog 41 bool "Disable watchdog shutdown on close" 70 depends on PMIC_DA9052 82 depends on MFD_DA9055 85 If you say yes here you get support for watchdog on the Dialog 93 depends on MFD_DA9063 102 depends on MFD_DA9062 111 depends on OF_GPIO 119 depends on GPIO_WATCHDOG=y 130 depends on MFD_MENF21BMC [all …]
|
/linux-4.4.14/drivers/net/wireless/ath/ath10k/ |
D | Kconfig | 3 depends on MAC80211 && HAS_DMA 6 This module adds support for wireless adapters based on 13 depends on ATH10K && PCI 19 depends on ATH10K 27 depends on ATH10K && DEBUG_FS 36 depends on ATH10K 37 depends on EVENT_TRACING 43 depends on ATH10K && CFG80211_CERTIFICATION_ONUS 46 This option enables DFS support for initiating radiation on
|
/linux-4.4.14/drivers/staging/iio/adc/ |
D | Kconfig | 8 depends on GPIOLIB || COMPILE_TEST 20 depends on AD7606 22 Say yes here to include parallel interface support on the AD7606 30 depends on AD7606 31 depends on SPI 33 Say yes here to include parallel interface support on the AD7606 41 depends on SPI 42 depends on GPIOLIB || COMPILE_TEST 54 depends on SPI 55 depends on GPIOLIB || COMPILE_TEST [all …]
|
/linux-4.4.14/drivers/staging/media/lirc/ |
D | Kconfig | 6 depends on LIRC 17 depends on LIRC && PCI 19 Driver for the IR interface on BT829-based hardware 23 depends on LIRC && USB 31 depends on LIRC && PARPORT 37 depends on LIRC && USB 43 depends on LIRC 50 depends on LIRC_SERIAL 56 depends on LIRC 62 depends on LIRC && I2C [all …]
|
/linux-4.4.14/arch/blackfin/mach-bf518/ |
D | Kconfig | 3 depends on (BF512 || BF514 || BF516 || BF518) 96 depends on BFIN_HYSTERESIS_CONTROL 98 bool "Enable Hysteresis on PORTF {0...7}" 100 bool "Enable Hysteresis on PORTF {8, 9}" 102 bool "Enable Hysteresis on PORTF 10" 104 bool "Enable Hysteresis on PORTF 11" 106 bool "Enable Hysteresis on PORTF {12, 13}" 108 bool "Enable Hysteresis on PORTF {14, 15}" 112 depends on BFIN_HYSTERESIS_CONTROL 114 bool "Enable Hysteresis on PORTG 0" [all …]
|
/linux-4.4.14/fs/fscache/ |
D | Kconfig | 7 Different sorts of caches can be plugged in, depending on the 13 bool "Gather statistical information on local caching" 14 depends on FSCACHE && PROC_FS 16 This option causes statistical information to be gathered on local 22 execution as there are a quite a few stats gathered, and on a 23 multi-CPU system these may be on cachelines that keep bouncing 30 bool "Gather latency information on local caching" 31 depends on FSCACHE && PROC_FS 33 This option causes latency information to be gathered on local 40 and on a multi-CPU system these may be on cachelines that keep [all …]
|
/linux-4.4.14/arch/arm/mach-exynos/ |
D | Kconfig | 70 depends on ARCH_EXYNOS3 75 depends on ARCH_EXYNOS4 80 depends on ARCH_EXYNOS4 85 depends on ARCH_EXYNOS4 90 depends on ARCH_EXYNOS4 95 depends on ARCH_EXYNOS5 100 depends on ARCH_EXYNOS5 105 depends on ARCH_EXYNOS5 110 depends on ARCH_EXYNOS5 115 depends on ARCH_EXYNOS5 [all …]
|
/linux-4.4.14/drivers/media/ |
D | Kconfig | 7 depends on HAS_IOMEM 11 Additional info and docs are available on the web at 36 Note: There are several DVB cards that are based on chips that 53 Additional info and docs are available on the web at 58 Note: There are several TV cards that are based on chips that 71 depends on INPUT 73 Enable support for Remote Controllers on Linux. This is 90 depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT 99 depends on MEDIA_CONTROLLER 100 depends on BROKEN [all …]
|
/linux-4.4.14/drivers/net/wireless/ath/ath9k/ |
D | Kconfig | 10 depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED 14 depends on (ATH9K || ATH9K_HTC) 22 depends on MAC80211 && HAS_DMA 29 This module adds support for wireless adapters based on 43 depends on ATH9K && PCI 51 depends on ATH9K 61 depends on ATH9K && DEBUG_FS 72 depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS 80 depends on ATH9K && CFG80211_CERTIFICATION_ONUS 83 This option enables DFS support for initiating radiation on [all …]
|
/linux-4.4.14/drivers/misc/ |
D | Kconfig | 9 depends on INPUT 15 depends on (I2C || SPI) && SYSFS 36 depends on AD525X_DPOT && I2C 45 depends on AD525X_DPOT && SPI_MASTER 56 depends on (AVR32 || ARCH_AT91) 59 blocks found on many Atmel processors. This facilitates using 64 depends on ATMEL_TCLIB 67 Select this to get a high precision clocksource based on a 73 (delays of up to two seconds) based on the 32 KiHz clock. 77 depends on ATMEL_TCB_CLKSRC [all …]
|
/linux-4.4.14/arch/x86/xen/ |
D | Kconfig | 7 depends on PARAVIRT 11 depends on X86_64 || (X86_32 && X86_PAE) 12 depends on X86_LOCAL_APIC && X86_TSC 20 depends on XEN && PCI_XEN && SWIOTLB_XEN 21 depends on X86_IO_APIC && ACPI && PCI 25 depends on XEN && PCI && X86_LOCAL_APIC 29 depends on XEN && X86_64 42 depends on XEN 48 depends on XEN && DEBUG_FS 56 depends on X86_64 && XEN && XEN_PVHVM
|
/linux-4.4.14/drivers/thermal/ti-soc-thermal/ |
D | Kconfig | 5 OMAP4460+ on die bandgap temperature sensor support. The register 13 depends on TI_SOC_THERMAL 14 depends on CPU_THERMAL 17 framework for the Texas Instruments on die bandgap temperature sensor. 24 depends on TI_SOC_THERMAL 25 depends on ARCH_OMAP3 || COMPILE_TEST 39 depends on TI_SOC_THERMAL 40 depends on ARCH_OMAP4 || COMPILE_TEST 53 depends on TI_SOC_THERMAL 54 depends on SOC_OMAP5 || COMPILE_TEST [all …]
|
/linux-4.4.14/drivers/media/pci/zoran/ |
D | Kconfig | 3 depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 && VIRT_TO_BUS 4 depends on !ALPHA 6 Say Y for support for MJPEG capture cards based on the Zoran 17 depends on VIDEO_ZORAN 22 card. This also supports really old DC10 cards based on the 27 depends on VIDEO_ZORAN 29 Say Y to support Zoran boards based on 36060 chips. 35 depends on VIDEO_ZORAN_ZR36060 43 depends on VIDEO_ZORAN_ZR36060 52 depends on VIDEO_ZORAN_ZR36060 [all …]
|
/linux-4.4.14/arch/sh/drivers/dma/ |
D | Kconfig | 5 bool "SuperH on-chip DMA controller (DMAC) support" 6 depends on CPU_SH3 || CPU_SH4 11 depends on SH_DMA 19 depends on SH_DMA 29 depends on SH_DMA 38 This allows you to specify the number of channels that the on-chip 44 depends on CPU_SUBTYPE_SH7760 48 Say Y if you want to use Audio/USB DMA on your SH7760 board. 52 depends on SH_DREAMCAST && SH_DMA 55 As this chains off of the on-chip DMAC, that must also be [all …]
|
/linux-4.4.14/scripts/coccinelle/null/ |
D | badzero.cocci | 5 //# This relies on type information. More type information can be obtained 25 @depends on patch@ 49 @t1 depends on !patch@ 69 @script:python depends on org@ 75 @script:python depends on report@ 92 @script:ocaml depends on s@ 121 @ depends on patch disable is_zero,isnt_zero @ 145 @t2 depends on !patch disable is_zero,isnt_zero @ 167 @script:python depends on org@ 173 @script:python depends on org@ [all …]
|
/linux-4.4.14/drivers/mfd/ |
D | Kconfig | 16 depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) 26 depends on I2C=y 35 depends on I2C=y && OF 44 depends on I2C=y 55 depends on I2C=y 56 depends on GPIOLIB || COMPILE_TEST 66 depends on OF 78 depends on OF 89 depends on I2C 98 depends on I2C=y [all …]
|
/linux-4.4.14/drivers/usb/storage/ |
D | Kconfig | 5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 10 depends on SCSI 19 This option depends on 'SCSI' support being enabled, but you 28 depends on USB_STORAGE 35 depends on USB_STORAGE 44 depends on USB_STORAGE_REALTEK && PM 49 depends on USB_STORAGE 58 depends on USB_STORAGE 67 depends on USB_STORAGE 70 on the In-Systems Design ISD-200 USB/ATA bridge. [all …]
|
/linux-4.4.14/lib/ |
D | Kconfig.debug | 4 bool "Show timing information on printks" 5 depends on PRINTK 31 depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY 35 specified in milliseconds on the kernel command line, 50 depends on PRINTK 51 depends on DEBUG_FS 56 enabled/disabled based on various levels of scope - per source file, 64 turned on by many CONFIG_*DEBUG* options. 81 flags : '=p' means the line is turned 'on' for printing 122 depends on DEBUG_KERNEL && !COMPILE_TEST [all …]
|
/linux-4.4.14/drivers/crypto/ |
D | Kconfig | 15 depends on X86 && !UML 27 depends on CRYPTO_DEV_PADLOCK 40 depends on CRYPTO_DEV_PADLOCK 54 depends on X86_32 && PCI 58 Say 'Y' here to use the AMD Geode LX processor on-board AES 66 depends on S390 81 depends on S390 91 depends on S390 101 depends on S390 111 depends on S390 [all …]
|
/linux-4.4.14/net/rfkill/ |
D | Kconfig | 8 found on many WiFi and Bluetooth cards. 16 depends on RFKILL 17 depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS 22 depends on RFKILL 23 depends on INPUT = y || RFKILL = INPUT 28 depends on RFKILL || !RFKILL 29 depends on REGULATOR 39 depends on RFKILL 40 depends on GPIOLIB || COMPILE_TEST
|
/linux-4.4.14/arch/arm64/crypto/ |
D | Kconfig | 4 depends on ARM64 13 depends on ARM64 && KERNEL_MODE_NEON 18 depends on ARM64 && KERNEL_MODE_NEON 23 depends on ARM64 && KERNEL_MODE_NEON 28 depends on ARM64 && KERNEL_MODE_NEON 33 depends on ARM64 && KERNEL_MODE_NEON 40 depends on ARM64 && KERNEL_MODE_NEON 47 depends on ARM64 && KERNEL_MODE_NEON 54 depends on ARM64
|
/linux-4.4.14/net/wireless/ |
D | Kconfig | 6 depends on CFG80211_WEXT || WIRELESS_EXT 10 depends on PROC_FS 11 depends on WEXT_CORE 21 depends on RFKILL || !RFKILL 26 For more information refer to documentation on the wireless wiki: 34 depends on CFG80211 49 depends on CFG80211 61 on it (or mac80211). 66 depends on CFG80211 70 For more information on cfg80211 regulatory refer to the wireless [all …]
|
/linux-4.4.14/sound/soc/intel/ |
D | Kconfig | 3 depends on INTEL_SCU_IPC 27 depends on ACPI 32 depends on (X86 || COMPILE_TEST) 45 depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM 46 depends on DW_DMAC_CORE 51 This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell 58 depends on X86_INTEL_LPSS && I2C 59 depends on DW_DMAC_CORE 69 depends on X86_INTEL_LPSS && I2C 70 depends on DW_DMAC_CORE [all …]
|
/linux-4.4.14/drivers/net/ethernet/emulex/benet/ |
D | Kconfig | 3 depends on PCI 10 depends on BE2NET && HWMON 11 depends on !(BE2NET=y && HWMON=m) 14 Say Y here if you want to expose thermal sensor data on 18 bool "VXLAN offload support on be2net driver" 20 depends on BE2NET && VXLAN && !(BE2NET=y && VXLAN=m) 22 Say Y here if you want to enable VXLAN offload support on
|
/linux-4.4.14/drivers/net/wireless/brcm80211/ |
D | Kconfig | 6 depends on MAC80211 7 depends on BCMA_POSSIBLE 15 This module adds support for PCIe wireless adapters based on Broadcom 22 depends on CFG80211 25 This module adds support for embedded wireless adapters based on 38 depends on (MMC = y || MMC = BRCMFMAC) 39 depends on BRCMFMAC 50 depends on (USB = y || USB = BRCMFMAC) 51 depends on BRCMFMAC 61 depends on BRCMFMAC [all …]
|
/linux-4.4.14/drivers/gpu/drm/panel/ |
D | Kconfig | 3 depends on DRM 8 depends on DRM && DRM_PANEL 12 depends on OF 13 depends on BACKLIGHT_CLASS_DEVICE 23 depends on OF && SPI 28 depends on OF && SPI 36 depends on OF 42 depends on OF 43 depends on DRM_MIPI_DSI 44 depends on BACKLIGHT_CLASS_DEVICE
|
/linux-4.4.14/arch/powerpc/platforms/44x/ |
D | Kconfig | 3 depends on 44x 12 depends on 44x 22 depends on 44x 35 depends on 44x 45 depends on 44x 54 depends on 44x 63 depends on 44x 74 depends on 44x 87 depends on 44x 97 depends on 44x [all …]
|
/linux-4.4.14/sound/soc/atmel/ |
D | Kconfig | 2 tristate "SoC Audio for the Atmel System-on-Chip" 3 depends on HAS_IOMEM 35 depends on ARCH_AT91 || COMPILE_TEST 36 depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI 40 Say Y if you want to add support for SoC audio on WM8731-based 45 depends on ARCH_AT91 || COMPILE_TEST 46 depends on ATMEL_SSC && I2C 55 depends on ARCH_AT91 || COMPILE_TEST 56 depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI 60 Say Y if you want to add support for audio SoC on an [all …]
|
/linux-4.4.14/drivers/atm/ |
D | Kconfig | 7 depends on NETDEVICES && ATM 25 depends on INET 32 depends on PCI && ATM 34 Supports ATM cards based on the Efficient Networks "Lanai" 37 have the code to drive the on-board Alcatel DSL chipset (yet). 41 depends on PCI 45 2MB on-board RAM (Efficient calls them "C" and "S", respectively), 55 depends on ATM_ENI 59 generally using printks, but still has some impact on performance. 65 depends on ATM_ENI [all …]
|
/linux-4.4.14/arch/powerpc/sysdev/ |
D | Kconfig | 7 depends on PCI && 4xx 12 depends on PCI_MSI 13 depends on PCI && 4xx 18 depends on PCI_MSI 19 depends on PCI && 4xx 24 depends on PCI_MSI 37 depends on PPC_SCOM && DEBUG_FS
|
/linux-4.4.14/drivers/net/ethernet/broadcom/ |
D | Kconfig | 8 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 23 depends on SSB_POSSIBLE && HAS_DMA 37 depends on B44 && SSB_PCIHOST_POSSIBLE 44 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 50 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 55 depends on BCM63XX 74 depends on PCI 85 depends on PCI && (IPV6 || IPV6=n) 97 depends on SIBYTE_SB1xxx_SOC 100 This driver supports Gigabit Ethernet interfaces based on the [all …]
|
/linux-4.4.14/arch/powerpc/kvm/ |
D | Kconfig | 48 depends on PPC_BOOK3S_32 && !SMP && !PTE_64BIT 54 in virtual machines on book3s_32 host processors. 63 depends on PPC_BOOK3S_64 69 in virtual machines on book3s_64 host processors. 78 depends on KVM_BOOK3S_64 && PPC_POWERNV 84 virtual machines on POWER7 and newer processors that have 92 on POWER7 or later processors, and cannot emulate a 99 depends on KVM_BOOK3S_64 102 Support running guest kernels in virtual machines on processors 107 This is not as fast as using hypervisor mode, but works on [all …]
|
/linux-4.4.14/drivers/input/misc/ |
D | Kconfig | 17 depends on MFD_88PM860X 27 depends on MFD_88PM800 37 depends on AB8500_CORE 57 depends on INPUT_AD714X && I2C 67 depends on INPUT_AD714X && SPI 77 depends on MFD_ARIZONA && SND_SOC 87 depends on I2C 108 depends on PCSPKR_PLATFORM 120 depends on MFD_SPMI_PMIC 123 on boards using a Qualcomm PM8941 compatible PMIC. [all …]
|
/linux-4.4.14/drivers/net/ethernet/ibm/emac/ |
D | Kconfig | 3 depends on PPC_DCR 7 typically found on 4xx embedded PowerPC chips, but also on the 12 depends on IBM_EMAC 17 depends on IBM_EMAC 22 depends on IBM_EMAC 27 depends on IBM_EMAC 32 depends on IBM_EMAC 44 depends on IBM_EMAC
|
/linux-4.4.14/sound/ppc/ |
D | Kconfig | 5 depends on PPC 14 depends on I2C && INPUT && PPC_PMAC 25 depends on SND_POWERMAC 29 range compression) on Tumbler/Snapper. 31 headphone/line jack is plugged, and turned on when unplugged. 33 Note that you can turn on/off DRC manually even without this 38 depends on PS3_PS3AV 42 Say Y here to include support for audio on the PS3 49 depends on SND_PS3
|
/linux-4.4.14/drivers/media/platform/exynos4-is/ |
D | Kconfig | 4 depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API 5 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 6 depends on OF && COMMON_CLK 18 depends on I2C 19 depends on HAS_DMA 33 depends on REGULATOR 46 depends on I2C 47 depends on HAS_DMA 60 depends on I2C 61 depends on HAS_DMA [all …]
|
/linux-4.4.14/mm/ |
D | Kconfig | 3 depends on ARCH_SELECT_MEMORY_MODEL 7 depends on SELECT_MEMORY_MODEL 14 depends on !(ARCH_DISCONTIGMEM_ENABLE || ARCH_SPARSEMEM_ENABLE) || ARCH_FLATMEM_ENABLE 33 depends on ARCH_DISCONTIGMEM_ENABLE 49 depends on ARCH_SPARSEMEM_ENABLE 66 depends on (!SELECT_MEMORY_MODEL && ARCH_DISCONTIGMEM_ENABLE) || DISCONTIGMEM_MANUAL 70 depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL 74 depends on (!DISCONTIGMEM && !SPARSEMEM) || FLATMEM_MANUAL 78 depends on !SPARSEMEM 87 depends on DISCONTIGMEM || NUMA [all …]
|
/linux-4.4.14/drivers/acpi/ |
D | Kconfig | 7 depends on !IA64_HP_SIM 8 depends on IA64 || X86 || (ARM64 && EXPERT) 9 depends on PCI 29 Linux support for ACPI is based on Intel Corporation's ACPI 30 Component Architecture (ACPI CA). For more information on the 71 depends on SUSPEND || HIBERNATION 72 depends on ACPI_SYSTEM_POWER_STATES_SUPPORT 77 depends on X86 && PROC_FS 85 This option has no effect on /proc/acpi/ directories 94 depends on X86 [all …]
|
/linux-4.4.14/net/ipv6/netfilter/ |
D | Kconfig | 6 depends on INET && IPV6 && NETFILTER 14 depends on INET && IPV6 && NF_CONNTRACK 22 This is IPv6 support on Layer 3 independent connection tracking. 52 depends on !NF_CONNTRACK || NF_CONNTRACK 62 depends on !NF_CONNTRACK || NF_CONNTRACK 78 depends on NF_CONNTRACK_IPV6 79 depends on NETFILTER_ADVANCED 89 depends on NF_TABLES_IPV6 105 depends on NF_TABLES_IPV6 106 depends on NFT_MASQ [all …]
|