1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_BERLIN_USB 19 tristate "Marvell Berlin USB PHY Driver" 20 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF 21 select GENERIC_PHY 22 help 23 Enable this to support the USB PHY on Marvell Berlin SoCs. 24 25config PHY_BERLIN_SATA 26 tristate "Marvell Berlin SATA PHY driver" 27 depends on ARCH_BERLIN && HAS_IOMEM && OF 28 select GENERIC_PHY 29 help 30 Enable this to support the SATA PHY on Marvell Berlin SoCs. 31 32config ARMADA375_USBCLUSTER_PHY 33 def_bool y 34 depends on MACH_ARMADA_375 || COMPILE_TEST 35 depends on OF 36 select GENERIC_PHY 37 38config PHY_DM816X_USB 39 tristate "TI dm816x USB PHY driver" 40 depends on ARCH_OMAP2PLUS 41 depends on USB_SUPPORT 42 select GENERIC_PHY 43 select USB_PHY 44 help 45 Enable this for dm816x USB to work. 46 47config PHY_EXYNOS_MIPI_VIDEO 48 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 49 depends on HAS_IOMEM 50 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 51 select GENERIC_PHY 52 default y if ARCH_S5PV210 || ARCH_EXYNOS 53 help 54 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 55 and EXYNOS SoCs. 56 57config PHY_LPC18XX_USB_OTG 58 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" 59 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 60 depends on MFD_SYSCON 61 select GENERIC_PHY 62 help 63 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. 64 65 This driver is need for USB0 support on LPC18xx/43xx and takes 66 care of enabling and clock setup. 67 68config PHY_PXA_28NM_HSIC 69 tristate "Marvell USB HSIC 28nm PHY Driver" 70 depends on HAS_IOMEM 71 select GENERIC_PHY 72 help 73 Enable this to support Marvell USB HSIC PHY driver for Marvell 74 SoC. This driver will do the PHY initialization and shutdown. 75 The PHY driver will be used by Marvell ehci driver. 76 77 To compile this driver as a module, choose M here. 78 79config PHY_PXA_28NM_USB2 80 tristate "Marvell USB 2.0 28nm PHY Driver" 81 depends on HAS_IOMEM 82 select GENERIC_PHY 83 help 84 Enable this to support Marvell USB 2.0 PHY driver for Marvell 85 SoC. This driver will do the PHY initialization and shutdown. 86 The PHY driver will be used by Marvell udc/ehci/otg driver. 87 88 To compile this driver as a module, choose M here. 89 90config PHY_MVEBU_SATA 91 def_bool y 92 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 93 depends on OF 94 select GENERIC_PHY 95 96config PHY_MIPHY28LP 97 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" 98 depends on ARCH_STI 99 select GENERIC_PHY 100 help 101 Enable this to support the miphy transceiver (for SATA/PCIE/USB3) 102 that is part of STMicroelectronics STiH407 SoC. 103 104config PHY_MIPHY365X 105 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" 106 depends on ARCH_STI 107 depends on HAS_IOMEM 108 depends on OF 109 select GENERIC_PHY 110 help 111 Enable this to support the miphy transceiver (for SATA/PCIE) 112 that is part of STMicroelectronics STiH41x SoC series. 113 114config PHY_RCAR_GEN2 115 tristate "Renesas R-Car generation 2 USB PHY driver" 116 depends on ARCH_SHMOBILE 117 depends on GENERIC_PHY 118 help 119 Support for USB PHY found on Renesas R-Car generation 2 SoCs. 120 121config OMAP_CONTROL_PHY 122 tristate "OMAP CONTROL PHY Driver" 123 depends on ARCH_OMAP2PLUS || COMPILE_TEST 124 help 125 Enable this to add support for the PHY part present in the control 126 module. This driver has API to power on the USB2 PHY and to write to 127 the mailbox. The mailbox is present only in omap4 and the register to 128 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 129 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 130 (PIPE3 PHY). 131 132config OMAP_USB2 133 tristate "OMAP USB2 PHY Driver" 134 depends on ARCH_OMAP2PLUS 135 depends on USB_SUPPORT 136 select GENERIC_PHY 137 select USB_PHY 138 select OMAP_CONTROL_PHY 139 depends on OMAP_OCP2SCP 140 help 141 Enable this to support the transceiver that is part of SOC. This 142 driver takes care of all the PHY functionality apart from comparator. 143 The USB OTG controller communicates with the comparator using this 144 driver. 145 146config TI_PIPE3 147 tristate "TI PIPE3 PHY Driver" 148 depends on ARCH_OMAP2PLUS || COMPILE_TEST 149 select GENERIC_PHY 150 select OMAP_CONTROL_PHY 151 depends on OMAP_OCP2SCP 152 help 153 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 154 driver takes care of all the PHY functionality apart from comparator. 155 This driver interacts with the "OMAP Control PHY Driver" to power 156 on/off the PHY. 157 158config TWL4030_USB 159 tristate "TWL4030 USB Transceiver Driver" 160 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 161 depends on USB_SUPPORT 162 select GENERIC_PHY 163 select USB_PHY 164 help 165 Enable this to support the USB OTG transceiver on TWL4030 166 family chips (including the TWL5030 and TPS659x0 devices). 167 This transceiver supports high and full speed devices plus, 168 in host mode, low speed. 169 170config PHY_EXYNOS_DP_VIDEO 171 tristate "EXYNOS SoC series Display Port PHY driver" 172 depends on OF 173 depends on ARCH_EXYNOS || COMPILE_TEST 174 default ARCH_EXYNOS 175 select GENERIC_PHY 176 help 177 Support for Display Port PHY found on Samsung EXYNOS SoCs. 178 179config BCM_KONA_USB2_PHY 180 tristate "Broadcom Kona USB2 PHY Driver" 181 depends on HAS_IOMEM 182 select GENERIC_PHY 183 help 184 Enable this to support the Broadcom Kona USB 2.0 PHY. 185 186config PHY_EXYNOS5250_SATA 187 tristate "Exynos5250 Sata SerDes/PHY driver" 188 depends on SOC_EXYNOS5250 189 depends on HAS_IOMEM 190 depends on OF 191 select GENERIC_PHY 192 select I2C 193 select I2C_S3C2410 194 select MFD_SYSCON 195 help 196 Enable this to support SATA SerDes/Phy found on Samsung's 197 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 198 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 199 port to accept one SATA device. 200 201config PHY_HIX5HD2_SATA 202 tristate "HIX5HD2 SATA PHY Driver" 203 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM 204 select GENERIC_PHY 205 select MFD_SYSCON 206 help 207 Support for SATA PHY on Hisilicon hix5hd2 Soc. 208 209config PHY_MT65XX_USB3 210 tristate "Mediatek USB3.0 PHY Driver" 211 depends on ARCH_MEDIATEK && OF 212 select GENERIC_PHY 213 help 214 Say 'Y' here to add support for Mediatek USB3.0 PHY driver 215 for mt65xx SoCs. it supports two usb2.0 ports and 216 one usb3.0 port. 217 218config PHY_SUN4I_USB 219 tristate "Allwinner sunxi SoC USB PHY driver" 220 depends on ARCH_SUNXI && HAS_IOMEM && OF 221 depends on RESET_CONTROLLER 222 depends on EXTCON 223 depends on POWER_SUPPLY 224 select GENERIC_PHY 225 help 226 Enable this to support the transceiver that is part of Allwinner 227 sunxi SoCs. 228 229 This driver controls the entire USB PHY block, both the USB OTG 230 parts, as well as the 2 regular USB 2 host PHYs. 231 232config PHY_SUN9I_USB 233 tristate "Allwinner sun9i SoC USB PHY driver" 234 depends on ARCH_SUNXI && HAS_IOMEM && OF 235 depends on RESET_CONTROLLER 236 depends on USB_COMMON 237 select GENERIC_PHY 238 help 239 Enable this to support the transceiver that is part of Allwinner 240 sun9i SoCs. 241 242 This driver controls each individual USB 2 host PHY. 243 244config PHY_SAMSUNG_USB2 245 tristate "Samsung USB 2.0 PHY driver" 246 depends on HAS_IOMEM 247 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 248 select GENERIC_PHY 249 select MFD_SYSCON 250 default ARCH_EXYNOS 251 help 252 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 253 SoCs. This driver provides the interface for USB 2.0 PHY. Support 254 for particular PHYs will be enabled based on the SoC type in addition 255 to this driver. 256 257config PHY_S5PV210_USB2 258 bool "Support for S5PV210" 259 depends on PHY_SAMSUNG_USB2 260 depends on ARCH_S5PV210 261 help 262 Enable USB PHY support for S5PV210. This option requires that Samsung 263 USB 2.0 PHY driver is enabled and means that support for this 264 particular SoC is compiled in the driver. In case of S5PV210 two phys 265 are available - device and host. 266 267config PHY_EXYNOS4210_USB2 268 bool 269 depends on PHY_SAMSUNG_USB2 270 default CPU_EXYNOS4210 271 272config PHY_EXYNOS4X12_USB2 273 bool 274 depends on PHY_SAMSUNG_USB2 275 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 276 277config PHY_EXYNOS5250_USB2 278 bool 279 depends on PHY_SAMSUNG_USB2 280 default SOC_EXYNOS5250 || SOC_EXYNOS5420 281 282config PHY_EXYNOS5_USBDRD 283 tristate "Exynos5 SoC series USB DRD PHY driver" 284 depends on ARCH_EXYNOS && OF 285 depends on HAS_IOMEM 286 depends on USB_DWC3_EXYNOS 287 select GENERIC_PHY 288 select MFD_SYSCON 289 default y 290 help 291 Enable USB DRD PHY support for Exynos 5 SoC series. 292 This driver provides PHY interface for USB 3.0 DRD controller 293 present on Exynos5 SoC series. 294 295config PHY_PISTACHIO_USB 296 tristate "IMG Pistachio USB2.0 PHY driver" 297 depends on MACH_PISTACHIO 298 select GENERIC_PHY 299 help 300 Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. 301 302config PHY_QCOM_APQ8064_SATA 303 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 304 depends on ARCH_QCOM 305 depends on HAS_IOMEM 306 depends on OF 307 select GENERIC_PHY 308 309config PHY_QCOM_IPQ806X_SATA 310 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 311 depends on ARCH_QCOM 312 depends on HAS_IOMEM 313 depends on OF 314 select GENERIC_PHY 315 316config PHY_ROCKCHIP_USB 317 tristate "Rockchip USB2 PHY Driver" 318 depends on ARCH_ROCKCHIP && OF 319 select GENERIC_PHY 320 help 321 Enable this to support the Rockchip USB 2.0 PHY. 322 323config PHY_ST_SPEAR1310_MIPHY 324 tristate "ST SPEAR1310-MIPHY driver" 325 select GENERIC_PHY 326 depends on MACH_SPEAR1310 || COMPILE_TEST 327 help 328 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. 329 330config PHY_ST_SPEAR1340_MIPHY 331 tristate "ST SPEAR1340-MIPHY driver" 332 select GENERIC_PHY 333 depends on MACH_SPEAR1340 || COMPILE_TEST 334 help 335 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. 336 337config PHY_XGENE 338 tristate "APM X-Gene 15Gbps PHY support" 339 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 340 select GENERIC_PHY 341 help 342 This option enables support for APM X-Gene SoC multi-purpose PHY. 343 344config PHY_STIH407_USB 345 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" 346 depends on RESET_CONTROLLER 347 depends on ARCH_STI || COMPILE_TEST 348 select GENERIC_PHY 349 help 350 Enable this support to enable the picoPHY device used by USB2 351 and USB3 controllers on STMicroelectronics STiH407 SoC families. 352 353config PHY_STIH41X_USB 354 tristate "STMicroelectronics USB2 PHY driver for STiH41x series" 355 depends on ARCH_STI 356 select GENERIC_PHY 357 help 358 Enable this to support the USB transceiver that is part of 359 STMicroelectronics STiH41x SoC series. 360 361config PHY_QCOM_UFS 362 tristate "Qualcomm UFS PHY driver" 363 depends on OF && ARCH_QCOM 364 select GENERIC_PHY 365 help 366 Support for UFS PHY on QCOM chipsets. 367 368config PHY_TUSB1210 369 tristate "TI TUSB1210 ULPI PHY module" 370 depends on USB_ULPI_BUS 371 select GENERIC_PHY 372 help 373 Support for TI TUSB1210 USB ULPI PHY. 374 375config PHY_BRCMSTB_SATA 376 tristate "Broadcom STB SATA PHY driver" 377 depends on ARCH_BRCMSTB 378 depends on OF 379 select GENERIC_PHY 380 help 381 Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. 382 Likely useful only with CONFIG_SATA_BRCMSTB enabled. 383 384config PHY_CYGNUS_PCIE 385 tristate "Broadcom Cygnus PCIe PHY driver" 386 depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) 387 select GENERIC_PHY 388 default ARCH_BCM_CYGNUS 389 help 390 Enable this to support the Broadcom Cygnus PCIe PHY. 391 If unsure, say N. 392 393endmenu 394