Lines Matching refs:on
8 depends on HAS_IOMEM
23 depends on ARM_AMBA
33 bool "Support for console on AMBA serial port"
34 depends on SERIAL_AMBA_PL010=y
50 depends on ARM_AMBA
60 bool "Support for console on AMBA serial port"
61 depends on SERIAL_AMBA_PL011=y
78 depends on ARM64 || ARM
85 with "earlycon=smh" on the kernel command line. The console is
89 tristate "BCM1xxx on-chip DUART serial support"
90 depends on SIBYTE_SB1xxx_SOC=y
97 is implemented. Depending on the SOC configuration there may be
104 bool "Support for console on a BCM1xxx DUART serial port"
105 depends on SERIAL_SB1250_DUART=y
117 bool "AT91 / AT32 on-chip serial port support"
118 depends on ARCH_AT91 || AVR32 || COMPILE_TEST
122 This enables the driver for the on-chip UARTs of the Atmel
126 bool "Support for console on AT91 / AT32 serial port"
127 depends on SERIAL_ATMEL=y
130 Say Y here if you wish to use an on-chip UART on a Atmel
136 bool "Support DMA transfers on AT91 / AT32 serial port"
137 depends on SERIAL_ATMEL
152 depends on SERIAL_ATMEL=y
169 depends on KGDB_SERIAL_CONSOLE
188 depends on ARCH_KS8695
194 bool "Support for console on KS8695 (Centaur) serial port"
195 depends on SERIAL_KS8695=y
205 depends on ARCH_MESON
208 This enables the driver for the on-chip UARTs of the Amlogic
212 bool "Support for console on meson"
213 depends on SERIAL_MESON=y
223 depends on ARCH_CLPS711X || COMPILE_TEST
227 This enables the driver for the on-chip UARTs of the Cirrus
231 bool "Support for console on CLPS711X serial port"
232 depends on SERIAL_CLPS711X=y
242 depends on PLAT_SAMSUNG || ARCH_EXYNOS
245 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
247 provide all of these ports, depending on how the serial port
252 depends on SERIAL_SAMSUNG
259 depends on SERIAL_SAMSUNG
268 depends on SERIAL_SAMSUNG && DEBUG_LL
276 bool "Support for console on Samsung SoC serial port"
277 depends on SERIAL_SAMSUNG=y
281 Allow selection of the S3C24XX on-board serial ports for use as
293 depends on ARCH_SIRF
296 Support for the on-chip UART on the CSR SiRFprimaII series,
298 provide all of these ports, depending on how the serial port
302 bool "Support for console on SiRF SoC serial port"
303 depends on SERIAL_SIRFSOC=y
315 depends on ARCH_TEGRA && TEGRA20_APB_DMA
318 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
320 provide all of these ports, depending on how the serial port
326 depends on SPI
333 depends on SPI_MASTER
347 depends on MACH_DECSTATION && 32BIT
355 bool "Support console on DECstation DZ serial driver"
356 depends on SERIAL_DZ=y
365 Note that the firmware uses ttyS3 as the serial console on
372 depends on MACH_DECSTATION
385 bool "Support for console on a DECstation Z85C30 serial port"
386 depends on SERIAL_ZS=y
395 Note that the firmware uses ttyS1 as the serial console on the
396 Maxine and ttyS3 on the others using this driver.
402 depends on FOOTBRIDGE
405 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
410 bool "Console on DC21285 serial port"
411 depends on SERIAL_21285=y
414 If you have enabled the serial port on the 21285 footbridge you can
426 depends on MV64X60
432 bool "Support for console on Marvell MPSC serial port"
433 depends on SERIAL_MPSC
436 Say Y here if you want to support a serial console on a Marvell MPSC.
440 depends on ARCH_PXA || ARCH_MMP
443 If you have a machine based on an Intel XScale PXA2xx CPU you
447 bool "Console on PXA serial port"
448 depends on SERIAL_PXA
451 If you have enabled the serial port on the Intel XScale PXA
463 depends on ARCH_SA1100
466 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
472 bool "Console on SA1100 serial port"
473 depends on SERIAL_SA1100
476 If you have enabled the serial port on the SA1100/SA1110 StrongARM
488 depends on BLACKFIN
492 Add support for the built-in UARTs on the Blackfin.
498 bool "Console on Blackfin serial port"
499 depends on SERIAL_BFIN=y
504 depends on SERIAL_BFIN
512 depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
526 depends on SERIAL_BFIN
532 depends on SERIAL_BFIN_UART0
538 depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
544 depends on SERIAL_BFIN_UART1
550 depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
556 depends on SERIAL_BFIN_UART2
562 depends on SERIAL_BFIN && (BF54x)
568 depends on SERIAL_BFIN_UART3
574 depends on ARCH_MXC || COMPILE_TEST
578 If you have a machine based on a Motorola IMX CPU you
582 bool "Console on IMX serial port"
583 depends on SERIAL_IMX=y
587 If you have enabled the serial port on the Freescale IMX
598 depends on HAS_IOMEM
607 bool "Support for console on Xilinx uartlite serial port"
608 depends on SERIAL_UARTLITE=y
617 depends on SPARC
624 depends on SPARC
626 This driver supports the Zilog8530 serial ports found on many Sparc
630 bool "Console on Sun Zilog8530 serial port"
631 depends on SERIAL_SUNZILOG=y
634 on your Sparc system as the console, you can do so by answering
639 depends on SPARC && PCI
642 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
646 bool "Console on Sun SU serial port"
647 depends on SERIAL_SUNSU=y
650 on your Sparc system as the console, you can do so by answering
655 depends on GSC
667 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
668 3. Add device ttyB0 to /etc/securetty (if you want to log on as
669 root on this console.)
673 bool "Support for console on serial MUX"
674 depends on SERIAL_MUX=y
680 depends on PARISC && !SERIAL_MUX && VT
689 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
690 3. Add device ttyB0 to /etc/securetty (if you want to log on as
691 root on this console.)
696 depends on SPARC && PCI
698 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
703 bool "Console on Sun Siemens SAB82532 serial port"
704 depends on SERIAL_SUNSAB=y
707 on your Sparc system as the console, you can do so by answering
712 depends on SPARC64
714 This driver supports the console device found on SUN4V Sparc
719 depends on SGI_HAS_ZILOG
722 This driver supports the Zilog8530 serial ports found on SGI
726 bool "Console on SGI Zilog8530 serial port"
727 depends on SERIAL_IP22_ZILOG=y
732 depends on SUPERH || ARCH_SHMOBILE || H8300 || COMPILE_TEST
737 depends on SERIAL_SH_SCI
741 bool "Support for console on SuperH SCI(F)"
742 depends on SERIAL_SH_SCI=y
747 depends on SERIAL_SH_SCI && DMA_ENGINE
751 depends on SOC_PNX833X
759 depends on SERIAL_PNX8XXX
767 depends on ARCH_LPC32XX && OF
771 Those are UARTs completely different from the Standard UARTs on the
777 depends on SERIAL_HS_LPC32XX=y
781 ports on the LPC32XX as the console, you can do so by answering
795 depends on M68328 || M68EZ328 || M68VZ328
801 bool "Support RTS/CTS on 68328 serial port"
802 depends on SERIAL_68328
806 depends on COLDFIRE
813 depends on SERIAL_MCF
822 depends on SERIAL_MCF
829 depends on (M68K && MAC) || PPC_PMAC
832 This driver supports the Zilog z85C30 serial ports found on
838 depends on SERIAL_PMACZILOG
840 The pmac_zilog driver for the z85C30 chip on many powermacs
850 access the built-in serial ports on powermacs will need to
858 Say N unless you need the z85c30 ports on your (Power)Mac
862 bool "Console on Mac or PowerMac z85c30 serial port"
863 depends on SERIAL_PMACZILOG=y
867 on your (Power)Mac as the console, you can do so by answering
872 depends on CPM2 || CPM1
875 This driver supports the SCC and SMC serial ports on Motorola
879 bool "Support for console on CPM SCC/SMC serial port"
880 depends on SERIAL_CPM=y
896 depends on IA64_GENERIC || IA64_SGI_SN2
906 depends on PPC_MPC52xx || PPC_MPC512x
915 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
916 depends on SERIAL_MPC52xx=y
924 depends on SERIAL_MPC52xx_CONSOLE=y
933 depends on PCI && PPC_PSERIES
946 depends on M32R
954 depends on SERIAL_M32R_SIO=y
963 bool "M32R SIO I/F on a PLD"
964 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
968 on a PLD (Programmable Logic Device).
975 depends on HAS_TXX9_SERIAL
984 depends on SERIAL_TXX9
989 depends on SERIAL_TXX9=y
994 depends on !SERIAL_8250 && SERIAL_TXX9
998 depends on CPU_VR41XX
1007 depends on SERIAL_VR41XX=y
1011 a console on a serial port, say Y. Otherwise, say N.
1015 depends on PCI
1031 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1035 and wish to use the serial ports on this card, say Y.
1040 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1047 bool "MSM on-chip serial port support"
1048 depends on ARCH_QCOM
1053 depends on SERIAL_MSM=y
1058 bool "VIA VT8500 on-chip serial port support"
1059 depends on ARCH_VT8500
1064 depends on SERIAL_VT8500=y
1069 depends on ETRAX_ARCH_V32 && OF
1075 depends on SERIAL_ETRAXFS
1080 depends on ARCH_NETX
1083 If you have a machine based on a Hilscher NetX SoC you
1090 bool "Console on NetX serial port"
1091 depends on SERIAL_NETX=y
1094 If you have enabled the serial port on the Hilscher NetX SoC
1098 tristate "Serial port on Open Firmware platform bus"
1099 depends on OF
1100 depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
1103 on a platform specific bus, you should enable this option.
1109 depends on ARCH_OMAP2PLUS
1112 If you have a machine based on an Texas Instruments OMAP CPU you
1120 bool "Console on OMAP serial port"
1121 depends on SERIAL_OMAP=y
1136 depends on PPC_DCR
1145 bool "Console on NWP serial port"
1146 depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1149 Support for Console on the NWP serial ports.
1153 depends on LANTIQ
1157 Support for console and UART on Lantiq SoCs.
1161 depends on QUICC_ENGINE
1166 This driver supports the QE serial ports on Freescale embedded
1178 bool "Console on SCCNXP serial port"
1179 depends on SERIAL_SCCNXP=y
1182 Support for console on SCCNXP serial ports.
1190 depends on (SPI_MASTER && !I2C) || I2C
1198 depends on SERIAL_SC16IS7XX
1199 depends on I2C
1204 Enable SC16IS7xx driver on I2C bus,
1211 depends on SERIAL_SC16IS7XX
1212 depends on SPI_MASTER
1216 Enable SC16IS7xx driver on SPI bus,
1223 depends on BLACKFIN
1226 Enable SPORT emulate UART on Blackfin series.
1232 bool "Console on Blackfin sport emulated uart"
1233 depends on SERIAL_BFIN_SPORT=y
1238 depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
1244 depends on SERIAL_BFIN_SPORT0_UART
1250 depends on SERIAL_BFIN_SPORT
1256 depends on SERIAL_BFIN_SPORT1_UART
1262 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1268 depends on SERIAL_BFIN_SPORT2_UART
1274 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1280 depends on SERIAL_BFIN_SPORT3_UART
1287 depends on X86_32 || COMPILE_TEST
1289 Add support for UART controller on timberdale.
1294 depends on MIPS || ARM || COMPILE_TEST
1296 This enables the driver for the onchip UART core found on
1305 bool "Console on BCM63xx serial port"
1306 depends on SERIAL_BCM63XX=y
1310 If you have enabled the serial port on the BCM63xx CPU
1315 depends on OF && SPARC
1321 bool "Console on GRLIB APBUART serial port"
1322 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1325 Support for running a console on the GRLIB APBUART
1335 depends on SERIAL_ALTERA_JTAGUART=y
1342 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1356 depends on SERIAL_ALTERA_UART
1365 depends on SERIAL_ALTERA_UART
1374 depends on SERIAL_ALTERA_UART=y
1381 depends on GPIOLIB || COMPILE_TEST
1382 depends on SPI && HAS_DMA
1384 Support for the IFX6x60 modem devices on Intel MID platforms.
1388 depends on PCI && (X86_32 || COMPILE_TEST)
1403 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1404 depends on SERIAL_PCH_UART=y
1412 depends on ARCH_MXS || COMPILE_TEST
1421 depends on SERIAL_MXS_AUART=y
1428 depends on OF
1436 depends on SERIAL_XILINX_PS_UART=y
1444 depends on HAVE_CLK && SOC_AR933X
1454 bool "Console on AR933X serial port"
1455 depends on SERIAL_AR933X=y
1462 depends on SERIAL_AR933X
1470 depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1473 This driver support the USART and UART ports on
1478 depends on SERIAL_EFM32_UART=y
1482 tristate "TILE-Gx on-chip serial port support"
1483 depends on TILEGX
1487 This device provides access to the on-chip UARTs on the TILE-Gx
1494 Driver for on-chip UART for ARC(Synopsys) for the legacy
1498 bool "Console on ARC UART"
1499 depends on SERIAL_ARC=y
1503 Enable system Console on ARC UART
1507 depends on SERIAL_ARC
1516 depends on PCI
1532 depends on SERIAL_RP2
1540 depends on HAS_DMA
1543 Support for the on-chip lpuart on some Freescale SOCs.
1546 bool "Console on Freescale lpuart serial port"
1547 depends on SERIAL_FSL_LPUART=y
1551 If you have enabled the lpuart serial port on the Freescale SoCs,
1556 depends on OF
1559 Support for the on-chip USART on Conexant Digicolor SoCs.
1562 bool "Console on Conexant Digicolor serial port"
1563 depends on SERIAL_CONEXANT_DIGICOLOR=y
1566 If you have enabled the USART serial port on Conexant Digicolor
1572 depends on ARM || COMPILE_TEST
1574 This driver is for the on-chip Asychronous Serial Controller on
1582 bool "Support for console on ST ASC"
1583 depends on SERIAL_ST_ASC=y
1589 depends on MCB
1592 on a MCB carrier.
1599 depends on ARCH_SPRD
1606 depends on SERIAL_SPRD=y
1612 with "earlycon" on the kernel command line. The console is
1618 depends on ARM || COMPILE_TEST
1620 This driver is for the on-chip Serial Controller on
1628 bool "Support for console on STM32"
1629 depends on SERIAL_STM32=y