/linux-4.4.14/Documentation/devicetree/bindings/phy/ |
D | qcom,usb-8x16-phy.txt | 5 Value type: <string> 10 Value type: <prop-encoded-array> 15 Value type: <prop-encoded-array> 22 Value type: <string> 27 Value type: <phandle> 32 Value type: <phandle> 37 Value type: <phandle> 42 Value type: <prop-encoded-array> 47 Value type: <string> 52 Value type: <prop-encoded-array>
|
/linux-4.4.14/Documentation/devicetree/bindings/input/ |
D | qcom,pm8xxx-keypad.txt | 7 Value type: <string> 14 Value type: <prop-encoded-array> 19 Value type: <prop-encoded-array> 27 Value type: <prop-encoded-array> 33 Value type: <bool> 38 Value type: <bool> 44 Value type: <u32> 50 Value type: <u32> 56 Value type: <u32> 62 Value type: <u32> [all …]
|
D | qcom,pm8941-pwrkey.txt | 7 Value type: <string> 13 Value type: <prop-encoded-array> 18 Value type: <prop-encoded-array> 25 Value type: <u32> 31 Value type: <empty>
|
D | qcom,pm8xxx-pwrkey.txt | 7 Value type: <string> 14 Value type: <prop-encoded-array> 19 Value type: <prop-encoded-array> 27 Value type: <u32> 33 Value type: <empty>
|
D | qcom,pm8xxx-vib.txt | 7 Value type: <string> 14 Value type: <prop-encoded-array>
|
/linux-4.4.14/Documentation/devicetree/bindings/pinctrl/ |
D | qcom,pmic-gpio.txt | 8 Value type: <string> 21 Value type: <prop-encoded-array> 26 Value type: <prop-encoded-array> 32 Value type: <none> 37 Value type: <u32> 72 Value type: <string-array> 86 Value type: <string> 100 Value type: <none> 105 Value type: <none> 110 Value type: <empty> [all …]
|
D | qcom,pmic-mpp.txt | 8 Value type: <string> 22 Value type: <prop-encoded-array> 27 Value type: <prop-encoded-array> 33 Value type: <none> 38 Value type: <u32> 72 Value type: <string-array> 82 Value type: <string> 91 Value type: <none> 96 Value type: <u32> 105 Value type: <none> [all …]
|
D | qcom,msm8960-pinctrl.txt | 8 Value type: <string> 13 Value type: <prop-encoded-array> 18 Value type: <prop-encoded-array> 23 Value type: <none> 28 Value type: <u32> 34 Value type: <none> 39 Value type: <u32> 74 Value type: <string-array> 87 Value type: <string> 118 Value type: <none> [all …]
|
D | qcom,apq8084-pinctrl.txt | 8 Value type: <string> 13 Value type: <prop-encoded-array> 18 Value type: <prop-encoded-array> 23 Value type: <none> 28 Value type: <u32> 34 Value type: <none> 39 Value type: <u32> 74 Value type: <string-array> 87 Value type: <string> 116 Value type: <none> [all …]
|
D | qcom,msm8916-pinctrl.txt | 8 Value type: <string> 13 Value type: <prop-encoded-array> 18 Value type: <prop-encoded-array> 23 Value type: <none> 28 Value type: <u32> 34 Value type: <none> 39 Value type: <u32> 74 Value type: <string-array> 92 Value type: <string> 124 Value type: <none> [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/mfd/ |
D | qcom-pm8xxx.txt | 10 Value type: <string> 17 Value type: <u32> 22 Value type: <u32> 27 Value type: <prop-encoded-array> 35 Value type : <u32> 48 Value type: <empty> 60 Value type: <string> 68 Value type: <prop-encoded-array> 73 Value type: <prop-encoded-array> 78 Value type: <empty>
|
D | qcom-rpm.txt | 10 Value type: <string> 19 Value type: <prop-encoded-array> 24 Value type: <prop-encoded-array> 32 Value type: <string-array> 37 Value type: <prop-encoded-array> 57 Value type: <string> 84 Value type: <phandle> 106 Value type: <phandle> 136 Value type: <phandle> 166 Value type: <empty> [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/crypto/ |
D | fsl-sec4.txt | 56 Value type: <string> 61 Value type: <u32> 67 Value type: <u32> 73 Value type: <u32> 80 Value type: <prop-encoded-array> 87 Value type: <prop-encoded-array> 95 Value type: <prop_encoded-array> 104 Value type: <phandle> 111 Value type: <prop_encoded-array> 117 Value type: <string> [all …]
|
D | fsl-sec6.txt | 22 Value type: <string> 27 Value type: <u32> 33 Value type: <u32> 39 Value type: <u32> 46 Value type: <prop-encoded-array> 52 Value type: <prop-encoded-array> 83 Value type: <string> 88 Value type: <prop-encoded-array> 94 Value type: <prop_encoded-array>
|
/linux-4.4.14/Documentation/devicetree/bindings/iio/adc/ |
D | qcom,spmi-vadc.txt | 10 Value type: <string> 15 Value type: <prop-encoded-array> 20 Value type: <u32> 26 Value type: <u32> 31 Value type: <u32> 37 Value type: <prop-encoded-array> 44 Value type: <u32> 50 Value type: <u32> 58 Value type: <u32 array> 68 Value type: <empty> [all …]
|
D | qcom,spmi-iadc.txt | 13 Value type: <string> 18 Value type: <prop-encoded-array> 23 Value type: <prop-encoded-array> 28 Value type: <u32>
|
D | at91_adc.txt | 40 * trigger-value: Value to put in the Trigger register
|
/linux-4.4.14/Documentation/devicetree/bindings/power_supply/ |
D | qcom_smbb.txt | 6 Value type: <stringlist> 12 Value type: <prop-encoded-array> 17 Value type: <prop-encoded-array> 32 Value type: <stringlist> 45 Value type: <u32>; uA; range [100mA : 3A] 50 Value type: <u32>; uV; range [2.1V : 3.6V] 57 Value type: <u32>; uV; range [3.24V : 5V] 64 Value type: <u32>; uV; range [3.24V : 5V] 71 Value type: <u32>; uA; range [100mA : 3A] 78 Value type: <u32>; uV; range [3.24V : 5V] [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/powerpc/fsl/ |
D | mcm.txt | 17 Value type: <string> 22 Value type: <prop-encoded-array> 29 Value type: <u32> 45 Value type: <string> 51 Value type: <prop-encoded-array> 58 Value type: <prop-encoded-array> 62 Value type: <phandle>
|
D | ecm.txt | 17 Value type: <string> 22 Value type: <prop-encoded-array> 29 Value type: <u32> 45 Value type: <string> 51 Value type: <prop-encoded-array> 58 Value type: <prop-encoded-array> 62 Value type: <phandle>
|
D | dcsr.txt | 23 Value type: <string> 29 Value type: <u32> 35 Value type: <u32> 42 Value type: <prop-encoded-array> 63 Value type: <string> 68 Value type: <prop_encoded-array> 89 Value type: <phandle> 92 is being mapped. Value must be "&mpic" 96 Value type: <prop-encoded-array> 120 Value type: <string> [all …]
|
D | fman.txt | 25 Value type: <stringlist> 34 Value type: <u32> 66 Value type: <prop-encoded-array> 77 Value type: <prop-encoded-array> 82 Value type: <prop-encoded-array> 87 Value type: <stringlist> 92 Value type: <prop-encoded-array> 99 Value type: <prop-encoded-array> 129 Value type: <stringlist> 134 Value type: <prop-encoded-array> [all …]
|
D | srio-rmu.txt | 12 Value type: <string> 20 Value type: <prop-encoded-array> 27 Value type: <prop-encoded-array> 43 Value type: <string> 51 Value type: <prop-encoded-array> 58 Value type: <prop_encoded-array> 72 Value type: <string> 81 Value type: <prop-encoded-array> 88 Value type: <prop_encoded-array> 102 Value type: <string> [all …]
|
D | srio.txt | 7 Value type: <string> 17 Value type: <prop-encoded-array> 24 Value type: <prop_encoded-array> 35 Value type: <phandle> 45 Value type: <u32> 50 Value type: <prop-encoded-array> 58 Value type: <prop-encoded-array>
|
D | interlaken-lac.txt | 41 Value type: <string> 49 Value Device 60 Value type: <phandle> 66 Value type: <prop-encoded-array> 72 Value type: <prop-encoded-array> 102 Value type: <u32> 107 Value type: <u32> 112 Value type: <string> 117 Value type: <prop-encoded-array> 133 Value type: <string> [all …]
|
D | mpic.txt | 16 Value type: <string> 24 Value type: <prop-encoded-array> 31 Value type: <empty> 37 Value type: <u32> 44 Value type: <u32> 49 Value type: <empty> 62 Value type: <empty> 69 Value type: <empty> 75 Value type: <u32>
|
D | cpus.txt | 15 Value type: <empty> 26 Value type: <u32>
|
D | raideng.txt | 61 property is normally set by firmware. Value
|
/linux-4.4.14/Documentation/devicetree/bindings/soc/fsl/ |
D | qman-portals.txt | 21 Value type: <stringlist> 27 Value type: <prop-encoded-array> 34 Value type: <prop-encoded-array> 39 Value type: <prop-encoded-array> 45 Value type: <phandle> 52 Value type: <u32> 71 Value type: <prop-encoded-array> 76 Value type: <phandle> 81 Value type: <phandle> 93 Value type: <stringlist> [all …]
|
D | qman.txt | 24 Value type: <stringlist> 30 Value type: <prop-encoded-array> 38 Value type: <prop-encoded-array> 43 Value type: <phandle> 48 Value type: <prop-encoded-array> 53 Value type: <phandle> 60 Value type: <prop-encoded-array> 69 Value type: <prop-encoded-array> 85 Value type: <stringlist> 94 Value type: <stringlist>
|
D | bman.txt | 22 Value type: <stringlist> 28 Value type: <prop-encoded-array> 36 Value type: <prop-encoded-array> 41 Value type: <phandle> 46 Value type: <prop-encoded-array> 51 Value type: <phandle> 61 Value type: <prop-encoded-array> 77 Value type: <stringlist>
|
D | bman-portals.txt | 20 Value type: <stringlist> 26 Value type: <prop-encoded-array> 33 Value type: <prop-encoded-array>
|
/linux-4.4.14/drivers/staging/rtl8723au/core/ |
D | rtw_efuse.c | 277 void EFUSE_Write1Byte(struct rtw_adapter *Adapter, u16 Address, u8 Value) in EFUSE_Write1Byte() argument 289 rtl8723au_write8(Adapter, EFUSE_CTRL, Value); in EFUSE_Write1Byte() 526 u8 *Value) in efuse_ShadowRead1Byte() argument 530 *Value = pEEPROM->efuse_eeprom_data[Offset]; in efuse_ShadowRead1Byte() 534 u16 *Value) in efuse_ShadowRead2Byte() argument 538 *Value = pEEPROM->efuse_eeprom_data[Offset]; in efuse_ShadowRead2Byte() 539 *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8; in efuse_ShadowRead2Byte() 543 u32 *Value) in efuse_ShadowRead4Byte() argument 547 *Value = pEEPROM->efuse_eeprom_data[Offset]; in efuse_ShadowRead4Byte() 548 *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8; in efuse_ShadowRead4Byte() [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/regulator/ |
D | qcom,spmi-regulator.txt | 5 Value type: <string> 13 Value type: <prop-encoded-array> 18 Value type: <string-array> 34 Value type: <phandle> 49 Value type: <phandle> 67 Value type: <phandle> 93 Value type: <u32> 109 Value type: <u32> 116 Value type: <u32> 122 Value type: <u32> [all …]
|
/linux-4.4.14/Documentation/isdn/ |
D | INTERFACE.fax | 122 Value of +FBADLIN 125 Value of +FBADMUL 128 Value of +FBOR 131 Value of +FET command in send-mode. 138 Value of +FCQ 141 Value of +FCR 144 Value of +FCTCRTY 147 Value of +FMINSP 150 Value of +FPHCTO 153 Value of +FREL [all …]
|
D | README.HiSax | 412 <delay> in ms Value between 50 and 800 ms is recommended.
|
/linux-4.4.14/Documentation/devicetree/bindings/power/ |
D | qcom,coincell-charger.txt | 9 Value type: <string> 14 Value type: <u32> 19 Value type: <u32> 25 Value type: <u32> 31 Value type: <boolean>
|
/linux-4.4.14/Documentation/device-mapper/ |
D | dm-uevent.txt | 23 Value: Name of device-mapper target that generated the event. 29 Value: Device-mapper specific action that caused the uevent action. 37 Value: Valid unsigned integer range. 44 Value: Path name in the form of "Major:Minor" 50 Value: Valid unsigned integer range. 56 Value: Name 62 Value: UUID. (Empty string if there isn't one.)
|
/linux-4.4.14/drivers/staging/rtl8188eu/hal/ |
D | odm.c | 235 void ODM_CmnInfoInit(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def CmnInfo, u32 Value) in ODM_CmnInfoInit() argument 241 pDM_Odm->SupportAbility = (u32)Value; in ODM_CmnInfoInit() 244 pDM_Odm->SupportPlatform = (u8)Value; in ODM_CmnInfoInit() 247 pDM_Odm->SupportInterface = (u8)Value; in ODM_CmnInfoInit() 250 pDM_Odm->bIsMPChip = (u8)Value; in ODM_CmnInfoInit() 253 pDM_Odm->SupportICType = Value; in ODM_CmnInfoInit() 256 pDM_Odm->CutVersion = (u8)Value; in ODM_CmnInfoInit() 259 pDM_Odm->FabVersion = (u8)Value; in ODM_CmnInfoInit() 262 pDM_Odm->RFType = (u8)Value; in ODM_CmnInfoInit() 265 pDM_Odm->AntDivType = (u8)Value; in ODM_CmnInfoInit() [all …]
|
D | odm_HWConfig.c | 70 static u8 odm_EVMdbToPercentage(s8 Value) in odm_EVMdbToPercentage() argument 75 ret_val = Value; in odm_EVMdbToPercentage()
|
D | phy.c | 1429 dm_odm->RFCalibrateInfo.IQKMatrixRegSetting[chn_index].Value[0][i] = result[final][i]; in rtl88eu_phy_iq_calibrate()
|
/linux-4.4.14/Documentation/devicetree/bindings/soc/qcom/ |
D | qcom,smd.txt | 9 Value type: <stringlist> 21 Value type: <prop-encoded-array> 27 Value type: <prop-encoded-array> 36 Value type: <u32> 42 Value type: <u32> 55 Value type: <stringlist>
|
D | qcom,smem.txt | 8 Value type: <stringlist> 14 Value type: <prop-encoded-array> 19 Value type: <prop-encoded-array> 24 Value type: <prop-encoded-array>
|
/linux-4.4.14/Documentation/devicetree/bindings/arm/ |
D | cci.txt | 33 Value type: <string> 40 Value type: Integer cells. A register entry, expressed as a pair 48 Value type: Integer cells. An array of range entries, expressed 69 Value type: <string> 75 Value type: <string> 82 Value type: Integer cells. A register entry, expressed 97 Value type: <string> 106 Value type: Integer cells. A register entry, expressed 115 Value type: Integer cells. Array of interrupt specifier 139 Value type: <phandle>
|
D | cpus.txt | 42 Value type: <u32> 62 Value type: <u32> 73 Value type: <string> 119 Value type: <string> 182 Value type: <stringlist> 209 Value type: <prop-encoded-array> 219 Value type: <phandle> 226 Value type: <phandle> 231 Value type: <prop-encoded-array> 241 Value type: <phandle>
|
D | idle-states.txt | 237 Value type: <stringlist> 272 Value type: <stringlist> 277 Value type: <none> 283 Value type: <prop-encoded-array> 291 Value type: <prop-encoded-array> 297 Value type: <prop-encoded-array> 306 Value type: <prop-encoded-array> 322 Value type: <string> 336 Value type: <string>
|
D | l2cc.txt | 76 - prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> 78 - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
|
D | primecell.txt | 15 - arm,primecell-periphid : Value to override the h/w value with
|
D | psci.txt | 64 Value type: <u32>
|
D | topology.txt | 134 Value type: <phandle> 159 Value type: <phandle>
|
/linux-4.4.14/Documentation/devicetree/bindings/hwlock/ |
D | qcom-hwspinlock.txt | 8 Value type: <string> 15 Value type: <prop-encoded-array> 23 Value type: <u32>
|
/linux-4.4.14/drivers/staging/rtl8723au/hal/ |
D | odm.c | 283 u32 Value in ODM_CmnInfoInit23a() argument 294 pDM_Odm->bIsMPChip = (u8)Value; in ODM_CmnInfoInit23a() 297 pDM_Odm->SupportICType = Value; in ODM_CmnInfoInit23a() 300 pDM_Odm->CutVersion = (u8)Value; in ODM_CmnInfoInit23a() 303 pDM_Odm->FabVersion = (u8)Value; in ODM_CmnInfoInit23a() 306 pDM_Odm->BoardType = (u8)Value; in ODM_CmnInfoInit23a() 309 pDM_Odm->ExtLNA = (u8)Value; in ODM_CmnInfoInit23a() 312 pDM_Odm->ExtPA = (u8)Value; in ODM_CmnInfoInit23a() 315 pDM_Odm->ExtTRSW = (u8)Value; in ODM_CmnInfoInit23a() 318 pDM_Odm->bInHctTest = (bool)Value; in ODM_CmnInfoInit23a() [all …]
|
D | odm_HWConfig.c | 63 s8 Value in odm_EVMdbToPercentage() argument 71 ret_val = Value; in odm_EVMdbToPercentage()
|
/linux-4.4.14/Documentation/devicetree/bindings/soc/ |
D | qcom,smd-rpm.txt | 10 Value type: <string> 16 Value type: <stringlist> 30 Value type: <string> 44 Value type: <phandle> 62 Value type: <phandle>
|
/linux-4.4.14/Documentation/arm/Samsung/ |
D | Bootloader-interface.txt | 20 Offset Value Purpose 34 Offset Value Purpose 43 Offset Value Purpose 57 Offset Value Purpose
|
/linux-4.4.14/arch/metag/include/asm/ |
D | tbx.h | 269 #define METAC_COREID_CFGXCTX_MASK( Value ) (\ argument 270 ( (((Value & METAC_COREID_CFGDSP_BITS)>> \ 835 #define TBI_SETREG( Reg, Value ) do {\ argument 836 int __SRValue = Value; \ 840 #define TBI_SWAPREG( Reg, Value ) do {\ argument 841 int __XRValue = (Value); \ 844 Value = __XRValue; } while (0) 922 #define TBI_STOPINTS( Value ) do {\ argument 925 Value = __TT; } while (0) 926 #define TBI_RESTINTS( Value ) do {\ argument [all …]
|
/linux-4.4.14/arch/arm/mach-pxa/include/mach/ |
D | bitfield.h | 90 #define FInsrt(Value, Field) \ argument 91 (UData (Value) << FShft (Field))
|
/linux-4.4.14/arch/arm/mach-sa1100/include/mach/ |
D | bitfield.h | 90 #define FInsrt(Value, Field) \ argument 91 (UData (Value) << FShft (Field))
|
/linux-4.4.14/Documentation/ABI/testing/ |
D | sysfs-class-power-twl4030 | 8 Value is in micro-Amps. 10 Value is set automatically to an appropriate 13 Value can the set by writing to the attribute.
|
D | sysfs-bus-pci-devices-cciss | 67 Description: Value of 1 indicates the controller can honor the reset_devices 68 kernel parameter. Value of 0 indicates reset_devices cannot be 78 Description: Value of "simple" indicates that the controller has been placed 79 in "simple mode". Value of "performant" indicates that the
|
D | sysfs-bus-pci-drivers-janz-cmodio | 6 Value representing the HEX switch S2 of the janz carrier board CMOD-IO or CAN-PCI2
|
D | sysfs-class-net-janz-ican3 | 6 Value representing the can bus termination
|
D | sysfs-class-lcd | 15 Current contrast of this LCD device. Value is between 0 and
|
D | sysfs-platform-at91 | 6 Value representing the can_id of mailbox 0.
|
D | sysfs-class-bdi | 19 Value of st_dev on fuseblk filesystems.
|
D | sysfs-class-pwm | 32 Value is between 0 and /sys/class/pwm/pwmchipN/npwm - 1.
|
D | sysfs-class-net | 223 Indicates the interface latest or current speed value. Value is 235 as an integer value. Value depend on the type of interface,
|
/linux-4.4.14/Documentation/backlight/ |
D | lp855x-driver.txt | 24 Value : pwm based or register based 28 Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557 36 * device_control : Value of DEVICE CONTROL register.
|
/linux-4.4.14/Documentation/input/ |
D | cma3000_d0x.txt | 66 Value 47 71 Value -28 76 Value 905 81 Value 0
|
D | walkera0701.txt | 42 be changed by TX "joystick", check output from /proc/interrupts. Value for
|
D | iforce-protocol.txt | 48 00 ? Bit 1 (Value 2) is the value of the deadman switch
|
D | input-programming.txt | 178 Value is interpreted as a truth value, ie any nonzero value means key
|
D | joystick.txt | 425 Value | Joystick type
|
/linux-4.4.14/drivers/scsi/pcmcia/ |
D | nsp_io.h | 22 unsigned char Value); 56 unsigned char Value) in nsp_index_write() argument 59 outb(Value, BaseAddr + DATAREG); in nsp_index_write()
|
/linux-4.4.14/drivers/usb/usbip/ |
D | usbip_protocol.txt | 93 Offset | Length | Value | Description 104 Offset | Length | Value | Description 172 Offset | Length | Value | Description 189 Offset | Length | Value | Description 238 Offset | Length | Value | Description 286 Offset | Length | Value | Description 319 Offset | Length | Value | Description 340 Offset | Length | Value | Description
|
/linux-4.4.14/Documentation/devicetree/bindings/arm/msm/ |
D | qcom,kpss-acc.txt | 12 Value type: <string> 19 Value type: <prop-encoded-array>
|
D | qcom,saw2.txt | 23 Value type: <string> 33 Value type: <prop-encoded-array> 40 Value type: boolean
|
/linux-4.4.14/Documentation/arm64/ |
D | legacy_instructions.txt | 12 Value: 0 17 Value: 1 24 Value: 2
|
/linux-4.4.14/scripts/kconfig/ |
D | merge_config.sh | 122 echo Value of $CFG is redefined by fragment $MERGE_FILE: 127 echo Value of $CFG is redundant by fragment $MERGE_FILE:
|
D | zconf.tab.c | 845 #define YYBACKUP(Token, Value) \ argument 850 yylval = (Value); \ 922 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ argument 928 Type, Value); \ 1068 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) argument
|
D | zconf.tab.c_shipped | 845 #define YYBACKUP(Token, Value) \ 850 yylval = (Value); \ 922 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ 928 Type, Value); \ 1068 # define YY_SYMBOL_PRINT(Title, Type, Value, Location)
|
/linux-4.4.14/Documentation/networking/ |
D | e1000.txt | 49 Default Value: 0x2F 62 Default Value: 0 73 Default Value: Reads flow control settings from the EEPROM 83 Default Value: 3 172 Default Value: 256 190 Default Value: 0 211 Default Value: 128 224 Default Value: 0 (auto-negotiate at all supported speeds) 235 Default Value: 256 250 Default Value: 1 (use every Tx Descriptor) [all …]
|
D | e1000e.txt | 51 Default Value: 3 129 Default Value: 0 149 Default Value: 8 161 Default Value: 8 172 Default Value: 32 184 Default Value: 256 197 Default Value: 0 (disabled) 205 Default Value: 1 (enabled) 213 Default Value: 2 224 Default Value: 1 (enabled) [all …]
|
D | ixgbe.txt | 166 Default Value: 1 173 Default Value: 0 180 Default Value: 20 188 Default Value: 1 (off) 200 Default Value: 0
|
D | ixgb.txt | 131 Default Value: 512 143 Default Value: 72 154 Default Value: 256 161 Default Value: 1
|
D | arcnet-hardware.txt | 471 Setting Value 479 Setting Value 495 Setting Value 514 Setting Value 828 Switch | Value 1344 Switch | Label | Value 1554 Switch | Label | Value 1820 Switch | Value 1841 Switch | Value 1961 Switch | Value [all …]
|
D | igb.txt | 34 Default Value: 0
|
D | README.ipw2100 | 122 Name Value Example:
|
D | cdc_mbim.txt | 24 Default Value: Y (MBIM is preferred)
|
D | ip-sysctl.txt | 203 buffer. Value 0 is special, it means that nothing is reserved.
|
/linux-4.4.14/drivers/net/wireless/libertas/ |
D | README | 121 Value Frequency Subscribed 135 Value field specifies the number of consecutive missing beacons which 142 Value field specifies the consecutive failure count threshold which 150 above a threshold, specified by Value. 154 below a threshold, specified by Value. 158 above a threshold, specified by Value. 162 below a threshold, specified by Value.
|
/linux-4.4.14/Documentation/scsi/ |
D | aic79xx.txt | 226 Default Value: disabled 234 Default Value: 0x0000 240 Default Value: disabled 245 Default Value: disabled 251 Default Value: disabled 257 Default Value: disabled 265 Default Value: 32 287 Default Value: 32 312 Default Value: 0x0000 328 Default Value: DV Serial EEPROM configuration setting. [all …]
|
D | aic7xxx.txt | 201 Default Value: disabled 206 Default Value: 0x0000 218 Default Value: EISA/VLB probing is disabled by default. 231 Default Value: PCI Parity Error reporting is disabled 237 Default Value: disabled 242 Default Value: disabled 248 Default Value: disabled 254 Default Value: disabled 262 Default Value: 32 284 Default Value: 32 [all …]
|
D | link_power_management_policy.txt | 4 Value Effect
|
D | tmscsim.txt | 318 Value Number of Tagged Commands
|
D | st.txt | 468 Defines the default block size set automatically. Value
|
D | scsi_mid_low_api.txt | 1239 vendor-specific message requests. Value consists of an
|
/linux-4.4.14/Documentation/s390/ |
D | s390dbf.txt | 112 Return Value: Handle for generated debug area 133 Return Value: Handle for generated debug area 144 Return Value: none 156 Return Value: none 166 Return Value: True if level is less or equal to the current debug level. 175 Return Value: none 189 Return Value: Address of written debug entry 204 Return Value: Address of written debug entry 217 Return Value: Address of written debug entry 231 Return Value: Address of written debug entry [all …]
|
D | Debugging390.txt | 81 Bit Value
|
/linux-4.4.14/Documentation/devicetree/bindings/misc/ |
D | fsl,qoriq-mc.txt | 15 Value type: <string> 22 Value type: <prop-encoded-array>
|
/linux-4.4.14/drivers/staging/rtl8723au/include/ |
D | rtw_io.h | 193 u32 Value; member 220 u32 Value;
|
D | odm.h | 452 s32 Value[1][IQK_Matrix_REG_NUM]; member 833 u32 ConvertTo_dB23a(u32 Value); 846 void ODM_CmnInfoInit23a(struct dm_odm_t *pDM_Odm, enum odm_cmninfo CmnInfo, u32 Value); 850 void ODM_CmnInfoUpdate23a(struct dm_odm_t *pDM_Odm, u32 CmnInfo, u64 Value);
|
D | rtw_efuse.h | 107 void EFUSE_ShadowRead23a(struct rtw_adapter *pAdapter, u8 Type, u16 Offset, u32 *Value);
|
/linux-4.4.14/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/ |
D | qe.txt | 27 Value type: <phandle> 91 Value type: <string> 97 Value type: <prop-encoded-array>, encoded as an array of bytes
|
/linux-4.4.14/Documentation/block/ |
D | capability.txt | 9 Capability Value
|
/linux-4.4.14/sound/usb/usx2y/ |
D | usbus428ctldefs.h | 68 Value; member
|
/linux-4.4.14/Documentation/devicetree/bindings/display/bridge/ |
D | ptn3460.txt | 10 | Value | Resolution | Description |
|
/linux-4.4.14/Documentation/ |
D | pwm.txt | 71 Value is in nanoseconds and is the sum of the active and inactive 75 Value is in nanoseconds and must be less than the period. 80 enabled. Value is the string "normal" or "inversed".
|
D | intel_txt.txt | 51 Value Proposition for Linux or "Why should you care?"
|
D | kernel-parameters.txt | 609 Value can be changed at runtime via 1164 Value can be changed at runtime via /selinux/enforce.
|
/linux-4.4.14/drivers/staging/rtl8188eu/include/ |
D | odm.h | 609 s32 Value[1][IQK_Matrix_REG_NUM]; member 1086 u32 ConvertTo_dB(u32 Value); 1090 enum odm_common_info_def CmnInfo, u32 Value); 1091 void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
|
/linux-4.4.14/Documentation/devicetree/bindings/net/ |
D | marvell-armada-370-neta.txt | 13 Value is presented in bytes. If not used, by default 1600B is set for
|
/linux-4.4.14/drivers/staging/rtl8712/ |
D | rtl871x_io.h | 197 u32 Value; member 216 u32 Value;
|
/linux-4.4.14/Documentation/devicetree/bindings/spi/ |
D | efm32-spi.txt | 13 - energymicro,location: Value to write to the ROUTE register's LOCATION
|
/linux-4.4.14/drivers/staging/rtl8192e/rtl8192e/ |
D | rtl_dm.h | 165 u32 Value; member
|
D | rtl_dm.c | 634 u32 Value; in _rtl92e_dm_tx_power_tracking_callback_tssi() local 647 Value = (RF_Type<<8) | powerlevelOFDM24G; in _rtl92e_dm_tx_power_tracking_callback_tssi() 657 tx_cmd.Value = Value; in _rtl92e_dm_tx_power_tracking_callback_tssi()
|
/linux-4.4.14/Documentation/devicetree/bindings/pci/ |
D | ralink,rt3883-pci.txt | 24 Value must be either "disabled" or "okay". 100 Value must be either "disabled" or "okay".
|
/linux-4.4.14/arch/arc/kernel/ |
D | unwind.c | 135 Value enumerator 688 case Value: in set_rule() 761 set_rule(value, Value, in processCFI() 771 set_rule(value, Value, in processCFI() 1165 case Value: in arc_unwind() 1266 case Value: in arc_unwind()
|
/linux-4.4.14/Documentation/devicetree/bindings/sound/ |
D | adi,adau1701.txt | 6 - reg: The i2c address. Value depends on the state of ADDR0
|
/linux-4.4.14/Documentation/devicetree/bindings/leds/backlight/ |
D | lp855x.txt | 7 - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
|
/linux-4.4.14/Documentation/hwmon/ |
D | w83l786ng | 54 tolerance[1-2] - Value in degrees of Celsius (degC) for +- T
|
D | nct6775 | 109 pwm[1-5]_temp_sel Temperature source. Value is temperature sensor index. 112 Secondary temperature source. Value is temperature
|
D | w83792d | 179 tolerance[1-3] - Value in degrees of Celsius (degC) for +- T
|
D | vt1211 | 86 Voltage R1 R2 Divider Raw Value
|
D | lm85 | 203 Value Meaning
|
/linux-4.4.14/Documentation/virtual/kvm/devices/ |
D | arm-vgic.txt | 105 -EINVAL: Value set is out of the expected range 106 -EBUSY: Value has already be set, or GIC has already been initialized
|
/linux-4.4.14/Documentation/virtual/kvm/ |
D | msr.txt | 176 injection to indicate type of asynchronous page fault. Value 178 present. Value 2 means that the page is now available. Disabling 244 injection. Value of 1 means that guest can skip writing EOI to the apic 248 Value of 0 means that the EOI write is required.
|
/linux-4.4.14/drivers/gpu/drm/amd/amdkfd/ |
D | kfd_dbgmgr.h | 94 uint32_t Value; member
|
D | kfd_dbgdev.c | 643 wac_info->dbgWave_msg.DbgWaveMsg.WaveMsgInfoGen2.Value); in dbgdev_wave_control_diq() 766 wac_info->dbgWave_msg.DbgWaveMsg.WaveMsgInfoGen2.Value); in dbgdev_wave_control_nodiq()
|
D | kfd_chardev.c | 709 wac_info.dbgWave_msg.DbgWaveMsg.WaveMsgInfoGen2.Value = in kfd_ioctl_dbg_wave_control() 718 wac_info.dbgWave_msg.DbgWaveMsg.WaveMsgInfoGen2.Value); in kfd_ioctl_dbg_wave_control()
|
/linux-4.4.14/scripts/gdb/linux/ |
D | utils.py | 46 element = gdb.Value(0).cast(typeobj)
|
/linux-4.4.14/drivers/staging/rtl8192u/ |
D | r8192U_dm.h | 197 u32 Value; member
|
D | r8192U_dm.c | 516 u32 Value; in dm_TXPowerTrackingCallback_TSSI() local 530 Value = (RF_Type<<8) | powerlevelOFDM24G; in dm_TXPowerTrackingCallback_TSSI() 537 tx_cmd.Value = Value; in dm_TXPowerTrackingCallback_TSSI()
|
/linux-4.4.14/arch/sh/lib/ |
D | ashlsi3.S | 46 ! r4: Value to shift
|
D | ashrsi3.S | 46 ! r4: Value to shift
|
D | lshrsi3.S | 46 ! r4: Value to shift
|
/linux-4.4.14/Documentation/accounting/ |
D | taskstats-struct.txt | 121 * Value is cumulative, in nanoseconds, without a corresponding count 129 * Value is cumulative, in nanoseconds, without a corresponding count
|
/linux-4.4.14/scripts/dtc/ |
D | dtc-parser.tab.h_shipped | 72 /* Value type. */
|
D | dtc-parser.tab.c_shipped | 142 /* Value type. */ 295 # define YY_INITIAL_VALUE(Value) Value 302 # define YY_INITIAL_VALUE(Value) /* Nothing. */ 712 #define YYBACKUP(Token, Value) \ 717 yylval = (Value); \ 820 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ 826 Type, Value, Location); \ 927 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) 1766 ERROR(&(yylsp[0]), "Value out of range for"
|
/linux-4.4.14/Documentation/acpi/apei/ |
D | einj.txt | 40 Error Type Value Error Description 73 injection. Value is a bitmask as specified in ACPI5.0 spec for the
|
/linux-4.4.14/Documentation/devicetree/bindings/usb/ |
D | dwc3.txt | 46 - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
|
D | msm-hsusb.txt | 61 written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
|
/linux-4.4.14/Documentation/leds/ |
D | leds-lp5562.txt | 21 Value : RGB or W
|
/linux-4.4.14/Documentation/sound/alsa/ |
D | hdspm.txt | 230 Values - <channel-number 0-127> <Value 0-65535> 235 fader and 64-127 the playback to outputs fader. Value 0
|
D | ALSA-Configuration.txt | 1011 * Hoontech SoundTrack DSP 24 Value
|
/linux-4.4.14/Documentation/devicetree/bindings/thermal/ |
D | exynos-thermal.txt | 48 - samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
|
/linux-4.4.14/Documentation/video4linux/cx2341x/ |
D | fw-dma.txt | 48 The Flags, Command, Return Value and Timeout fields are ignored.
|
/linux-4.4.14/drivers/media/usb/pwc/ |
D | philips.txt | 192 Value Value Description Default
|
/linux-4.4.14/drivers/usb/storage/ |
D | freecom.c | 71 __le16 Value; /* Value to write. */ member
|
/linux-4.4.14/scripts/genksyms/ |
D | parse.tab.c_shipped | 911 #define YYBACKUP(Token, Value) \ 916 yylval = (Value); \ 960 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ 966 Type, Value); \ 1106 # define YY_SYMBOL_PRINT(Title, Type, Value, Location) 1413 # define YY_INITIAL_VALUE(Value) /* Nothing. */
|
/linux-4.4.14/tools/perf/Documentation/ |
D | perf-list.txt | 80 Num. Value Mnemonic Description Comment
|
/linux-4.4.14/drivers/net/ethernet/dec/tulip/ |
D | Kconfig | 36 own cache lines. Value of 4 corresponds to the typical 32 byte line
|
/linux-4.4.14/drivers/media/dvb-frontends/ |
D | drxd_hard.c | 870 u16 Value; in ReadIFAgc() local 871 status = Read16(state, FE_AG_REG_GC1_AGC_DAT__A, &Value, 0); in ReadIFAgc() 872 Value &= FE_AG_REG_GC1_AGC_DAT__M; in ReadIFAgc() 896 Vout = Vmin + ((Vmax - Vmin) * Value) / 1024; in ReadIFAgc()
|
/linux-4.4.14/Documentation/devicetree/bindings/mmc/ |
D | mmc.txt | 49 - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
|
/linux-4.4.14/drivers/media/usb/s2255/ |
D | s2255drv.c | 1900 u16 Index, u16 Value, void *TransferBuffer, in s2255_vendor_req() argument 1909 Value, Index, TransferBuffer, in s2255_vendor_req() 1914 Value, Index, TransferBuffer, in s2255_vendor_req()
|
/linux-4.4.14/Documentation/sysctl/ |
D | net.txt | 306 expires. Value is in milliseconds.
|
D | kernel.txt | 675 Value from 0 - 10000 is allowed.
|
/linux-4.4.14/Documentation/filesystems/nfs/ |
D | nfsroot.txt | 166 Value gets exported by /proc/net/pnp which is often linked
|
/linux-4.4.14/Documentation/RCU/ |
D | rcu_dereference.txt | 197 There is one exception to this rule: Value-speculation
|
/linux-4.4.14/Documentation/filesystems/ |
D | xfs.txt | 280 Causes certain error conditions to call BUG(). Value is a bitmask;
|
D | ntfs.txt | 205 Value MFT zone size (% of volume size)
|
/linux-4.4.14/drivers/tty/ |
D | synclinkmp.c | 5554 static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) in write_reg() argument 5557 *RegAddr = Value; in write_reg() 5566 static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) in write_reg16() argument 5569 *((u16 *)RegAddr) = Value; in write_reg16()
|
D | synclink.c | 666 static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value ); 670 static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
|
/linux-4.4.14/arch/tile/kernel/ |
D | intvec_64.S | 667 # error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix
|
D | intvec_32.S | 483 # error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix
|
/linux-4.4.14/Documentation/vm/ |
D | transhuge.txt | 169 A lower value leads to gain less thp performance. Value of
|
/linux-4.4.14/Documentation/ioctl/ |
D | hdio.txt | 694 performed. Value is one of:
|
/linux-4.4.14/drivers/watchdog/ |
D | Kconfig | 712 When "Watchdog Timer Value" enabled one can set 31-255 s operational range. 718 "Watchdog Timer Value" period, so to prevent it user can restart or
|
/linux-4.4.14/sound/pci/ |
D | Kconfig | 625 Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
|
/linux-4.4.14/drivers/scsi/aic7xxx/ |
D | aic79xx.reg | 3879 * Value to "or" into the SCBPTR[1] value to
|
/linux-4.4.14/Documentation/virtual/uml/ |
D | UserModeLinux-HOWTO.txt | 2708 Value returned is $1 = 0
|