1Intel(R) TXT Overview:
2=====================
3
4Intel's technology for safer computing, Intel(R) Trusted Execution
5Technology (Intel(R) TXT), defines platform-level enhancements that
6provide the building blocks for creating trusted platforms.
7
8Intel TXT was formerly known by the code name LaGrande Technology (LT).
9
10Intel TXT in Brief:
11o  Provides dynamic root of trust for measurement (DRTM)
12o  Data protection in case of improper shutdown
13o  Measurement and verification of launched environment
14
15Intel TXT is part of the vPro(TM) brand and is also available some
16non-vPro systems.  It is currently available on desktop systems
17based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell
18Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45,
19PM45, and GS45 Express chipsets.
20
21For more information, see http://www.intel.com/technology/security/.
22This site also has a link to the Intel TXT MLE Developers Manual,
23which has been updated for the new released platforms.
24
25Intel TXT has been presented at various events over the past few
26years, some of which are:
27      LinuxTAG 2008:
28          http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag.html
29      TRUST2008:
30          http://www.trust-conference.eu/downloads/Keynote-Speakers/
31          3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
32      IDF, Shanghai:
33          http://www.prcidf.com.cn/index_en.html
34      IDFs 2006, 2007 (I'm not sure if/where they are online)
35
36Trusted Boot Project Overview:
37=============================
38
39Trusted Boot (tboot) is an open source, pre-kernel/VMM module that
40uses Intel TXT to perform a measured and verified launch of an OS
41kernel/VMM.
42
43It is hosted on SourceForge at http://sourceforge.net/projects/tboot.
44The mercurial source repo is available at http://www.bughost.org/
45repos.hg/tboot.hg.
46
47Tboot currently supports launching Xen (open source VMM/hypervisor
48w/ TXT support since v3.2), and now Linux kernels.
49
50
51Value Proposition for Linux or "Why should you care?"
52=====================================================
53
54While there are many products and technologies that attempt to
55measure or protect the integrity of a running kernel, they all
56assume the kernel is "good" to begin with.  The Integrity
57Measurement Architecture (IMA) and Linux Integrity Module interface
58are examples of such solutions.
59
60To get trust in the initial kernel without using Intel TXT, a
61static root of trust must be used.  This bases trust in BIOS
62starting at system reset and requires measurement of all code
63executed between system reset through the completion of the kernel
64boot as well as data objects used by that code.  In the case of a
65Linux kernel, this means all of BIOS, any option ROMs, the
66bootloader and the boot config.  In practice, this is a lot of
67code/data, much of which is subject to change from boot to boot
68(e.g. changing NICs may change option ROMs).  Without reference
69hashes, these measurement changes are difficult to assess or
70confirm as benign.  This process also does not provide DMA
71protection, memory configuration/alias checks and locks, crash
72protection, or policy support.
73
74By using the hardware-based root of trust that Intel TXT provides,
75many of these issues can be mitigated.  Specifically: many
76pre-launch components can be removed from the trust chain, DMA
77protection is provided to all launched components, a large number
78of platform configuration checks are performed and values locked,
79protection is provided for any data in the event of an improper
80shutdown, and there is support for policy-based execution/verification.
81This provides a more stable measurement and a higher assurance of
82system configuration and initial state than would be otherwise
83possible.  Since the tboot project is open source, source code for
84almost all parts of the trust chain is available (excepting SMM and
85Intel-provided firmware).
86
87How Does it Work?
88=================
89
90o  Tboot is an executable that is launched by the bootloader as
91   the "kernel" (the binary the bootloader executes).
92o  It performs all of the work necessary to determine if the
93   platform supports Intel TXT and, if so, executes the GETSEC[SENTER]
94   processor instruction that initiates the dynamic root of trust.
95   -  If tboot determines that the system does not support Intel TXT
96      or is not configured correctly (e.g. the SINIT AC Module was
97      incorrect), it will directly launch the kernel with no changes
98      to any state.
99   -  Tboot will output various information about its progress to the
100      terminal, serial port, and/or an in-memory log; the output
101      locations can be configured with a command line switch.
102o  The GETSEC[SENTER] instruction will return control to tboot and
103   tboot then verifies certain aspects of the environment (e.g. TPM NV
104   lock, e820 table does not have invalid entries, etc.).
105o  It will wake the APs from the special sleep state the GETSEC[SENTER]
106   instruction had put them in and place them into a wait-for-SIPI
107   state.
108   -  Because the processors will not respond to an INIT or SIPI when
109      in the TXT environment, it is necessary to create a small VT-x
110      guest for the APs.  When they run in this guest, they will
111      simply wait for the INIT-SIPI-SIPI sequence, which will cause
112      VMEXITs, and then disable VT and jump to the SIPI vector.  This
113      approach seemed like a better choice than having to insert
114      special code into the kernel's MP wakeup sequence.
115o  Tboot then applies an (optional) user-defined launch policy to
116   verify the kernel and initrd.
117   -  This policy is rooted in TPM NV and is described in the tboot
118      project.  The tboot project also contains code for tools to
119      create and provision the policy.
120   -  Policies are completely under user control and if not present
121      then any kernel will be launched.
122   -  Policy action is flexible and can include halting on failures
123      or simply logging them and continuing.
124o  Tboot adjusts the e820 table provided by the bootloader to reserve
125   its own location in memory as well as to reserve certain other
126   TXT-related regions.
127o  As part of its launch, tboot DMA protects all of RAM (using the
128   VT-d PMRs).  Thus, the kernel must be booted with 'intel_iommu=on'
129   in order to remove this blanket protection and use VT-d's
130   page-level protection.
131o  Tboot will populate a shared page with some data about itself and
132   pass this to the Linux kernel as it transfers control.
133   -  The location of the shared page is passed via the boot_params
134      struct as a physical address.
135o  The kernel will look for the tboot shared page address and, if it
136   exists, map it.
137o  As one of the checks/protections provided by TXT, it makes a copy
138   of the VT-d DMARs in a DMA-protected region of memory and verifies
139   them for correctness.  The VT-d code will detect if the kernel was
140   launched with tboot and use this copy instead of the one in the
141   ACPI table.
142o  At this point, tboot and TXT are out of the picture until a
143   shutdown (S<n>)
144o  In order to put a system into any of the sleep states after a TXT
145   launch, TXT must first be exited.  This is to prevent attacks that
146   attempt to crash the system to gain control on reboot and steal
147   data left in memory.
148   -  The kernel will perform all of its sleep preparation and
149      populate the shared page with the ACPI data needed to put the
150      platform in the desired sleep state.
151   -  Then the kernel jumps into tboot via the vector specified in the
152      shared page.
153   -  Tboot will clean up the environment and disable TXT, then use the
154      kernel-provided ACPI information to actually place the platform
155      into the desired sleep state.
156   -  In the case of S3, tboot will also register itself as the resume
157      vector.  This is necessary because it must re-establish the
158      measured environment upon resume.  Once the TXT environment
159      has been restored, it will restore the TPM PCRs and then
160      transfer control back to the kernel's S3 resume vector.
161      In order to preserve system integrity across S3, the kernel
162      provides tboot with a set of memory ranges (RAM and RESERVED_KERN
163      in the e820 table, but not any memory that BIOS might alter over
164      the S3 transition) that tboot will calculate a MAC (message
165      authentication code) over and then seal with the TPM. On resume
166      and once the measured environment has been re-established, tboot
167      will re-calculate the MAC and verify it against the sealed value.
168      Tboot's policy determines what happens if the verification fails.
169      Note that the c/s 194 of tboot which has the new MAC code supports
170      this.
171
172That's pretty much it for TXT support.
173
174
175Configuring the System:
176======================
177
178This code works with 32bit, 32bit PAE, and 64bit (x86_64) kernels.
179
180In BIOS, the user must enable:  TPM, TXT, VT-x, VT-d.  Not all BIOSes
181allow these to be individually enabled/disabled and the screens in
182which to find them are BIOS-specific.
183
184grub.conf needs to be modified as follows:
185        title Linux 2.6.29-tip w/ tboot
186          root (hd0,0)
187                kernel /tboot.gz logging=serial,vga,memory
188                module /vmlinuz-2.6.29-tip intel_iommu=on ro
189                       root=LABEL=/ rhgb console=ttyS0,115200 3
190                module /initrd-2.6.29-tip.img
191                module /Q35_SINIT_17.BIN
192
193The kernel option for enabling Intel TXT support is found under the
194Security top-level menu and is called "Enable Intel(R) Trusted
195Execution Technology (TXT)".  It is considered EXPERIMENTAL and
196depends on the generic x86 support (to allow maximum flexibility in
197kernel build options), since the tboot code will detect whether the
198platform actually supports Intel TXT and thus whether any of the
199kernel code is executed.
200
201The Q35_SINIT_17.BIN file is what Intel TXT refers to as an
202Authenticated Code Module.  It is specific to the chipset in the
203system and can also be found on the Trusted Boot site.  It is an
204(unencrypted) module signed by Intel that is used as part of the
205DRTM process to verify and configure the system.  It is signed
206because it operates at a higher privilege level in the system than
207any other macrocode and its correct operation is critical to the
208establishment of the DRTM.  The process for determining the correct
209SINIT ACM for a system is documented in the SINIT-guide.txt file
210that is on the tboot SourceForge site under the SINIT ACM downloads.
211