| /linux-4.1.27/drivers/tty/serial/8250/ |
| D | 8250_mtk.c | 64 baud = uart_get_baud_rate(port, termios, old, in mtk8250_set_termios()
|
| D | 8250_omap.c | 333 baud = uart_get_baud_rate(port, termios, old, in omap_8250_set_termios()
|
| D | 8250_core.c | 2575 baud = uart_get_baud_rate(port, termios, old, in serial8250_do_set_termios()
3399 baud = uart_get_baud_rate(port, &termios, NULL, in serial8250_console_write()
|
| /linux-4.1.27/drivers/tty/serial/ |
| D | dz.c | 596 baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); in dz_set_termios()
599 baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); in dz_set_termios()
|
| D | mpc52xx_uart.c | 300 baud = uart_get_baud_rate(port, new, old, in mpc5200_psc_set_baudrate()
320 baud = uart_get_baud_rate(port, new, old, in mpc5200b_psc_set_baudrate()
559 baud = uart_get_baud_rate(port, new, old, in mpc512x_psc_set_baudrate()
900 baud = uart_get_baud_rate(port, new, old, in mpc5125_psc_set_baudrate()
|
| D | 21285.c | 229 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in serial21285_set_termios()
|
| D | m32r_sio.c | 729 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); in m32r_sio_set_termios()
731 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in m32r_sio_set_termios()
|
| D | sunhv.c | 326 unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); in sunhv_set_termios()
|
| D | arc_uart.c | 376 baud = uart_get_baud_rate(port, new, old, 0, 460800); in arc_serial_set_termios()
|
| D | timbuart.c | 299 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); in timbuart_set_termios()
|
| D | apbuart.c | 243 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); in apbuart_set_termios()
|
| D | digicolor-usart.c | 305 baud = uart_get_baud_rate(port, termios, old, in digicolor_uart_set_termios()
|
| D | serial_ks8695.c | 391 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in ks8695uart_set_termios()
|
| D | tilegx.c | 479 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); in tilegx_set_termios()
|
| D | altera_uart.c | 173 baud = uart_get_baud_rate(port, termios, old, 0, 4000000); in altera_uart_set_termios()
|
| D | uartlite.c | 307 baud = uart_get_baud_rate(port, termios, old, 0, 460800); in ulite_set_termios()
|
| D | clps711x.c | 272 baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096, in uart_clps711x_set_termios()
|
| D | meson_uart.c | 339 baud = uart_get_baud_rate(port, termios, old, 9600, 115200); in meson_uart_set_termios()
|
| D | mcf.c | 208 baud = uart_get_baud_rate(port, termios, old, 0, 230400); in mcf_set_termios()
|
| D | netx-serial.c | 372 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in netx_set_termios()
|
| D | ar933x_uart.c | 265 baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud); in ar933x_uart_set_termios()
|
| D | vt8500_serial.c | 384 baud = uart_get_baud_rate(port, termios, old, 900, 921600); in vt8500_set_termios()
|
| D | lpc32xx_hs.c | 548 baud = uart_get_baud_rate(port, termios, old, 0, in serial_lpc32xx_set_termios()
|
| D | sprd_serial.c | 379 baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT); in sprd_set_termios()
|
| D | lantiq.c | 457 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); in lqasc_set_termios()
|
| D | pnx8xxx_uart.c | 478 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in pnx8xxx_set_termios()
|
| D | st-asc.c | 493 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in asc_set_termios()
|
| D | bcm63xx_uart.c | 551 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); in bcm_uart_set_termios()
|
| D | efm32-uart.c | 357 baud = uart_get_baud_rate(port, new, old, in efm32_uart_set_termios()
|
| D | men_z135_uart.c | 717 baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16); in men_z135_set_termios()
|
| D | amba-pl010.c | 406 baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); in pl010_set_termios()
|
| D | bfin_sport_uart.c | 557 port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); in sport_set_termios()
|
| D | pmac_zilog.c | 1267 baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); in __pmz_set_termios()
1276 baud = uart_get_baud_rate(port, termios, old, 1200, 230400); in __pmz_set_termios()
|
| D | sb1250-duart.c | 587 baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); in sbd_set_termios()
|
| D | rp2.c | 385 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); in rp2_uart_set_termios()
|
| D | pxa.c | 468 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in serial_pxa_set_termios()
|
| D | sa1100.c | 452 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in sa1100_set_termios()
|
| D | vr41xx_siu.c | 548 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); in siu_set_termios()
|
| D | etraxfs-uart.c | 744 baud = uart_get_baud_rate(port, termios, old, 0, in etraxfs_uart_set_termios()
|
| D | fsl_lpuart.c | 1273 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); in lpuart_set_termios()
1408 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); in lpuart32_set_termios()
|
| D | msm_serial.c | 528 baud = uart_get_baud_rate(port, termios, old, 300, 115200); in msm_set_termios()
|
| D | sc16is7xx.c | 820 baud = uart_get_baud_rate(port, termios, old, in sc16is7xx_set_termios()
|
| D | ip22zilog.c | 886 baud = uart_get_baud_rate(port, termios, old, 1200, 76800); in ip22zilog_set_termios()
|
| D | sccnxp.c | 676 baud = uart_get_baud_rate(port, termios, old, 50, in sccnxp_set_termios()
|
| D | serial_txx9.c | 672 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); in serial_txx9_set_termios()
|
| D | ucc_uart.c | 953 baud = uart_get_baud_rate(port, termios, old, 0, 115200); in qe_uart_set_termios()
|
| D | xilinx_uartps.c | 660 baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud); in cdns_uart_set_termios()
|
| D | sunsab.c | 787 unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); in sunsab_set_termios()
|
| D | max310x.c | 869 baud = uart_get_baud_rate(port, termios, old, in max310x_set_termios()
|
| D | serial_core.c | 335 uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, in uart_get_baud_rate() function
404 EXPORT_SYMBOL(uart_get_baud_rate);
|
| D | mxs-auart.c | 755 baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); in mxs_auart_settermios()
|
| D | zs.c | 914 baud = uart_get_baud_rate(uport, termios, old_termios, 0, in zs_set_termios()
|
| D | serial-tegra.c | 1156 baud = uart_get_baud_rate(u, termios, oldtermios, in tegra_uart_set_termios()
|
| D | sunsu.c | 915 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in sunsu_set_termios()
|
| D | bfin_uart.c | 857 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); in bfin_serial_set_termios()
|
| D | sunzilog.c | 951 baud = uart_get_baud_rate(port, termios, old, 1200, 76800); in sunzilog_set_termios()
|
| D | ioc3_serial.c | 992 baud = uart_get_baud_rate(the_port, new_termios, old_termios, in ioc3_change_speed()
|
| D | icom.c | 1157 baud = uart_get_baud_rate(port, termios, old_termios, in icom_set_termios()
|
| D | omap-serial.c | 898 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); in serial_omap_set_termios()
|
| D | pch_uart.c | 1431 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); in pch_uart_set_termios()
|
| D | sirfsoc_uart.c | 944 baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000); in sirfsoc_uart_set_termios()
|
| D | mpsc.c | 1448 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); in mpsc_set_termios()
|
| D | ioc4_serial.c | 1728 baud = uart_get_baud_rate(the_port, new_termios, old_termios, in ioc4_change_speed()
|
| D | imx.c | 1339 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); in imx_set_termios()
|
| D | samsung.c | 1281 baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); in s3c24xx_serial_set_termios()
|
| D | amba-pl011.c | 1777 baud = uart_get_baud_rate(port, termios, old, 0, in pl011_set_termios()
|
| D | sh-sci.c | 1933 baud = uart_get_baud_rate(port, termios, old, 0, max_baud); in sci_set_termios()
|
| D | atmel_serial.c | 1974 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); in atmel_set_termios()
|
| /linux-4.1.27/include/linux/ |
| D | serial_core.h | 319 unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
|
| /linux-4.1.27/Documentation/serial/ |
| D | driver | 358 uart_get_baud_rate(port,termios,old,min,max)
|
| /linux-4.1.27/drivers/tty/serial/cpm_uart/ |
| D | cpm_uart_core.c | 513 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); in cpm_uart_set_termios()
|
| /linux-4.1.27/arch/mn10300/kernel/ |
| D | mn10300-serial.c | 1162 baud = uart_get_baud_rate(&port->uart, new, old, 0, in mn10300_serial_change_speed()
|