1/* 2 * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 6 * as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program; if not, write to the Free Software 15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 16 */ 17 18#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 19#define SUPPORT_SYSRQ 20#endif 21 22#include <linux/device.h> 23#include <linux/module.h> 24#include <linux/ioport.h> 25#include <linux/init.h> 26#include <linux/console.h> 27#include <linux/sysrq.h> 28#include <linux/platform_device.h> 29#include <linux/tty.h> 30#include <linux/tty_flip.h> 31#include <linux/serial_core.h> 32#include <linux/serial.h> 33 34#include <asm/io.h> 35#include <asm/irq.h> 36#include <mach/hardware.h> 37#include <mach/netx-regs.h> 38 39/* We've been assigned a range on the "Low-density serial ports" major */ 40#define SERIAL_NX_MAJOR 204 41#define MINOR_START 170 42 43enum uart_regs { 44 UART_DR = 0x00, 45 UART_SR = 0x04, 46 UART_LINE_CR = 0x08, 47 UART_BAUDDIV_MSB = 0x0c, 48 UART_BAUDDIV_LSB = 0x10, 49 UART_CR = 0x14, 50 UART_FR = 0x18, 51 UART_IIR = 0x1c, 52 UART_ILPR = 0x20, 53 UART_RTS_CR = 0x24, 54 UART_RTS_LEAD = 0x28, 55 UART_RTS_TRAIL = 0x2c, 56 UART_DRV_ENABLE = 0x30, 57 UART_BRM_CR = 0x34, 58 UART_RXFIFO_IRQLEVEL = 0x38, 59 UART_TXFIFO_IRQLEVEL = 0x3c, 60}; 61 62#define SR_FE (1<<0) 63#define SR_PE (1<<1) 64#define SR_BE (1<<2) 65#define SR_OE (1<<3) 66 67#define LINE_CR_BRK (1<<0) 68#define LINE_CR_PEN (1<<1) 69#define LINE_CR_EPS (1<<2) 70#define LINE_CR_STP2 (1<<3) 71#define LINE_CR_FEN (1<<4) 72#define LINE_CR_5BIT (0<<5) 73#define LINE_CR_6BIT (1<<5) 74#define LINE_CR_7BIT (2<<5) 75#define LINE_CR_8BIT (3<<5) 76#define LINE_CR_BITS_MASK (3<<5) 77 78#define CR_UART_EN (1<<0) 79#define CR_SIREN (1<<1) 80#define CR_SIRLP (1<<2) 81#define CR_MSIE (1<<3) 82#define CR_RIE (1<<4) 83#define CR_TIE (1<<5) 84#define CR_RTIE (1<<6) 85#define CR_LBE (1<<7) 86 87#define FR_CTS (1<<0) 88#define FR_DSR (1<<1) 89#define FR_DCD (1<<2) 90#define FR_BUSY (1<<3) 91#define FR_RXFE (1<<4) 92#define FR_TXFF (1<<5) 93#define FR_RXFF (1<<6) 94#define FR_TXFE (1<<7) 95 96#define IIR_MIS (1<<0) 97#define IIR_RIS (1<<1) 98#define IIR_TIS (1<<2) 99#define IIR_RTIS (1<<3) 100#define IIR_MASK 0xf 101 102#define RTS_CR_AUTO (1<<0) 103#define RTS_CR_RTS (1<<1) 104#define RTS_CR_COUNT (1<<2) 105#define RTS_CR_MOD2 (1<<3) 106#define RTS_CR_RTS_POL (1<<4) 107#define RTS_CR_CTS_CTR (1<<5) 108#define RTS_CR_CTS_POL (1<<6) 109#define RTS_CR_STICK (1<<7) 110 111#define UART_PORT_SIZE 0x40 112#define DRIVER_NAME "netx-uart" 113 114struct netx_port { 115 struct uart_port port; 116}; 117 118static void netx_stop_tx(struct uart_port *port) 119{ 120 unsigned int val; 121 val = readl(port->membase + UART_CR); 122 writel(val & ~CR_TIE, port->membase + UART_CR); 123} 124 125static void netx_stop_rx(struct uart_port *port) 126{ 127 unsigned int val; 128 val = readl(port->membase + UART_CR); 129 writel(val & ~CR_RIE, port->membase + UART_CR); 130} 131 132static void netx_enable_ms(struct uart_port *port) 133{ 134 unsigned int val; 135 val = readl(port->membase + UART_CR); 136 writel(val | CR_MSIE, port->membase + UART_CR); 137} 138 139static inline void netx_transmit_buffer(struct uart_port *port) 140{ 141 struct circ_buf *xmit = &port->state->xmit; 142 143 if (port->x_char) { 144 writel(port->x_char, port->membase + UART_DR); 145 port->icount.tx++; 146 port->x_char = 0; 147 return; 148 } 149 150 if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { 151 netx_stop_tx(port); 152 return; 153 } 154 155 do { 156 /* send xmit->buf[xmit->tail] 157 * out the port here */ 158 writel(xmit->buf[xmit->tail], port->membase + UART_DR); 159 xmit->tail = (xmit->tail + 1) & 160 (UART_XMIT_SIZE - 1); 161 port->icount.tx++; 162 if (uart_circ_empty(xmit)) 163 break; 164 } while (!(readl(port->membase + UART_FR) & FR_TXFF)); 165 166 if (uart_circ_empty(xmit)) 167 netx_stop_tx(port); 168} 169 170static void netx_start_tx(struct uart_port *port) 171{ 172 writel( 173 readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); 174 175 if (!(readl(port->membase + UART_FR) & FR_TXFF)) 176 netx_transmit_buffer(port); 177} 178 179static unsigned int netx_tx_empty(struct uart_port *port) 180{ 181 return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; 182} 183 184static void netx_txint(struct uart_port *port) 185{ 186 struct circ_buf *xmit = &port->state->xmit; 187 188 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 189 netx_stop_tx(port); 190 return; 191 } 192 193 netx_transmit_buffer(port); 194 195 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 196 uart_write_wakeup(port); 197} 198 199static void netx_rxint(struct uart_port *port, unsigned long *flags) 200{ 201 unsigned char rx, flg, status; 202 203 while (!(readl(port->membase + UART_FR) & FR_RXFE)) { 204 rx = readl(port->membase + UART_DR); 205 flg = TTY_NORMAL; 206 port->icount.rx++; 207 status = readl(port->membase + UART_SR); 208 if (status & SR_BE) { 209 writel(0, port->membase + UART_SR); 210 if (uart_handle_break(port)) 211 continue; 212 } 213 214 if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { 215 216 if (status & SR_PE) 217 port->icount.parity++; 218 else if (status & SR_FE) 219 port->icount.frame++; 220 if (status & SR_OE) 221 port->icount.overrun++; 222 223 status &= port->read_status_mask; 224 225 if (status & SR_BE) 226 flg = TTY_BREAK; 227 else if (status & SR_PE) 228 flg = TTY_PARITY; 229 else if (status & SR_FE) 230 flg = TTY_FRAME; 231 } 232 233 if (uart_handle_sysrq_char(port, rx)) 234 continue; 235 236 uart_insert_char(port, status, SR_OE, rx, flg); 237 } 238 239 spin_unlock_irqrestore(&port->lock, *flags); 240 tty_flip_buffer_push(&port->state->port); 241 spin_lock_irqsave(&port->lock, *flags); 242} 243 244static irqreturn_t netx_int(int irq, void *dev_id) 245{ 246 struct uart_port *port = dev_id; 247 unsigned long flags; 248 unsigned char status; 249 250 spin_lock_irqsave(&port->lock,flags); 251 252 status = readl(port->membase + UART_IIR) & IIR_MASK; 253 while (status) { 254 if (status & IIR_RIS) 255 netx_rxint(port, &flags); 256 if (status & IIR_TIS) 257 netx_txint(port); 258 if (status & IIR_MIS) { 259 if (readl(port->membase + UART_FR) & FR_CTS) 260 uart_handle_cts_change(port, 1); 261 else 262 uart_handle_cts_change(port, 0); 263 } 264 writel(0, port->membase + UART_IIR); 265 status = readl(port->membase + UART_IIR) & IIR_MASK; 266 } 267 268 spin_unlock_irqrestore(&port->lock,flags); 269 return IRQ_HANDLED; 270} 271 272static unsigned int netx_get_mctrl(struct uart_port *port) 273{ 274 unsigned int ret = TIOCM_DSR | TIOCM_CAR; 275 276 if (readl(port->membase + UART_FR) & FR_CTS) 277 ret |= TIOCM_CTS; 278 279 return ret; 280} 281 282static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) 283{ 284 unsigned int val; 285 286 /* FIXME: Locking needed ? */ 287 if (mctrl & TIOCM_RTS) { 288 val = readl(port->membase + UART_RTS_CR); 289 writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); 290 } 291} 292 293static void netx_break_ctl(struct uart_port *port, int break_state) 294{ 295 unsigned int line_cr; 296 spin_lock_irq(&port->lock); 297 298 line_cr = readl(port->membase + UART_LINE_CR); 299 if (break_state != 0) 300 line_cr |= LINE_CR_BRK; 301 else 302 line_cr &= ~LINE_CR_BRK; 303 writel(line_cr, port->membase + UART_LINE_CR); 304 305 spin_unlock_irq(&port->lock); 306} 307 308static int netx_startup(struct uart_port *port) 309{ 310 int ret; 311 312 ret = request_irq(port->irq, netx_int, 0, 313 DRIVER_NAME, port); 314 if (ret) { 315 dev_err(port->dev, "unable to grab irq%d\n",port->irq); 316 goto exit; 317 } 318 319 writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, 320 port->membase + UART_LINE_CR); 321 322 writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, 323 port->membase + UART_CR); 324 325exit: 326 return ret; 327} 328 329static void netx_shutdown(struct uart_port *port) 330{ 331 writel(0, port->membase + UART_CR) ; 332 333 free_irq(port->irq, port); 334} 335 336static void 337netx_set_termios(struct uart_port *port, struct ktermios *termios, 338 struct ktermios *old) 339{ 340 unsigned int baud, quot; 341 unsigned char old_cr; 342 unsigned char line_cr = LINE_CR_FEN; 343 unsigned char rts_cr = 0; 344 345 switch (termios->c_cflag & CSIZE) { 346 case CS5: 347 line_cr |= LINE_CR_5BIT; 348 break; 349 case CS6: 350 line_cr |= LINE_CR_6BIT; 351 break; 352 case CS7: 353 line_cr |= LINE_CR_7BIT; 354 break; 355 case CS8: 356 line_cr |= LINE_CR_8BIT; 357 break; 358 } 359 360 if (termios->c_cflag & CSTOPB) 361 line_cr |= LINE_CR_STP2; 362 363 if (termios->c_cflag & PARENB) { 364 line_cr |= LINE_CR_PEN; 365 if (!(termios->c_cflag & PARODD)) 366 line_cr |= LINE_CR_EPS; 367 } 368 369 if (termios->c_cflag & CRTSCTS) 370 rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; 371 372 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 373 quot = baud * 4096; 374 quot /= 1000; 375 quot *= 256; 376 quot /= 100000; 377 378 spin_lock_irq(&port->lock); 379 380 uart_update_timeout(port, termios->c_cflag, baud); 381 382 old_cr = readl(port->membase + UART_CR); 383 384 /* disable interrupts */ 385 writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), 386 port->membase + UART_CR); 387 388 /* drain transmitter */ 389 while (readl(port->membase + UART_FR) & FR_BUSY); 390 391 /* disable UART */ 392 writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); 393 394 /* modem status interrupts */ 395 old_cr &= ~CR_MSIE; 396 if (UART_ENABLE_MS(port, termios->c_cflag)) 397 old_cr |= CR_MSIE; 398 399 writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); 400 writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); 401 writel(line_cr, port->membase + UART_LINE_CR); 402 403 writel(rts_cr, port->membase + UART_RTS_CR); 404 405 /* 406 * Characters to ignore 407 */ 408 port->ignore_status_mask = 0; 409 if (termios->c_iflag & IGNPAR) 410 port->ignore_status_mask |= SR_PE; 411 if (termios->c_iflag & IGNBRK) { 412 port->ignore_status_mask |= SR_BE; 413 /* 414 * If we're ignoring parity and break indicators, 415 * ignore overruns too (for real raw support). 416 */ 417 if (termios->c_iflag & IGNPAR) 418 port->ignore_status_mask |= SR_PE; 419 } 420 421 port->read_status_mask = 0; 422 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 423 port->read_status_mask |= SR_BE; 424 if (termios->c_iflag & INPCK) 425 port->read_status_mask |= SR_PE | SR_FE; 426 427 writel(old_cr, port->membase + UART_CR); 428 429 spin_unlock_irq(&port->lock); 430} 431 432static const char *netx_type(struct uart_port *port) 433{ 434 return port->type == PORT_NETX ? "NETX" : NULL; 435} 436 437static void netx_release_port(struct uart_port *port) 438{ 439 release_mem_region(port->mapbase, UART_PORT_SIZE); 440} 441 442static int netx_request_port(struct uart_port *port) 443{ 444 return request_mem_region(port->mapbase, UART_PORT_SIZE, 445 DRIVER_NAME) != NULL ? 0 : -EBUSY; 446} 447 448static void netx_config_port(struct uart_port *port, int flags) 449{ 450 if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) 451 port->type = PORT_NETX; 452} 453 454static int 455netx_verify_port(struct uart_port *port, struct serial_struct *ser) 456{ 457 int ret = 0; 458 459 if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) 460 ret = -EINVAL; 461 462 return ret; 463} 464 465static struct uart_ops netx_pops = { 466 .tx_empty = netx_tx_empty, 467 .set_mctrl = netx_set_mctrl, 468 .get_mctrl = netx_get_mctrl, 469 .stop_tx = netx_stop_tx, 470 .start_tx = netx_start_tx, 471 .stop_rx = netx_stop_rx, 472 .enable_ms = netx_enable_ms, 473 .break_ctl = netx_break_ctl, 474 .startup = netx_startup, 475 .shutdown = netx_shutdown, 476 .set_termios = netx_set_termios, 477 .type = netx_type, 478 .release_port = netx_release_port, 479 .request_port = netx_request_port, 480 .config_port = netx_config_port, 481 .verify_port = netx_verify_port, 482}; 483 484static struct netx_port netx_ports[] = { 485 { 486 .port = { 487 .type = PORT_NETX, 488 .iotype = UPIO_MEM, 489 .membase = (char __iomem *)io_p2v(NETX_PA_UART0), 490 .mapbase = NETX_PA_UART0, 491 .irq = NETX_IRQ_UART0, 492 .uartclk = 100000000, 493 .fifosize = 16, 494 .flags = UPF_BOOT_AUTOCONF, 495 .ops = &netx_pops, 496 .line = 0, 497 }, 498 }, { 499 .port = { 500 .type = PORT_NETX, 501 .iotype = UPIO_MEM, 502 .membase = (char __iomem *)io_p2v(NETX_PA_UART1), 503 .mapbase = NETX_PA_UART1, 504 .irq = NETX_IRQ_UART1, 505 .uartclk = 100000000, 506 .fifosize = 16, 507 .flags = UPF_BOOT_AUTOCONF, 508 .ops = &netx_pops, 509 .line = 1, 510 }, 511 }, { 512 .port = { 513 .type = PORT_NETX, 514 .iotype = UPIO_MEM, 515 .membase = (char __iomem *)io_p2v(NETX_PA_UART2), 516 .mapbase = NETX_PA_UART2, 517 .irq = NETX_IRQ_UART2, 518 .uartclk = 100000000, 519 .fifosize = 16, 520 .flags = UPF_BOOT_AUTOCONF, 521 .ops = &netx_pops, 522 .line = 2, 523 }, 524 } 525}; 526 527#ifdef CONFIG_SERIAL_NETX_CONSOLE 528 529static void netx_console_putchar(struct uart_port *port, int ch) 530{ 531 while (readl(port->membase + UART_FR) & FR_BUSY); 532 writel(ch, port->membase + UART_DR); 533} 534 535static void 536netx_console_write(struct console *co, const char *s, unsigned int count) 537{ 538 struct uart_port *port = &netx_ports[co->index].port; 539 unsigned char cr_save; 540 541 cr_save = readl(port->membase + UART_CR); 542 writel(cr_save | CR_UART_EN, port->membase + UART_CR); 543 544 uart_console_write(port, s, count, netx_console_putchar); 545 546 while (readl(port->membase + UART_FR) & FR_BUSY); 547 writel(cr_save, port->membase + UART_CR); 548} 549 550static void __init 551netx_console_get_options(struct uart_port *port, int *baud, 552 int *parity, int *bits, int *flow) 553{ 554 unsigned char line_cr; 555 556 *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | 557 readl(port->membase + UART_BAUDDIV_LSB); 558 *baud *= 1000; 559 *baud /= 4096; 560 *baud *= 1000; 561 *baud /= 256; 562 *baud *= 100; 563 564 line_cr = readl(port->membase + UART_LINE_CR); 565 *parity = 'n'; 566 if (line_cr & LINE_CR_PEN) { 567 if (line_cr & LINE_CR_EPS) 568 *parity = 'e'; 569 else 570 *parity = 'o'; 571 } 572 573 switch (line_cr & LINE_CR_BITS_MASK) { 574 case LINE_CR_8BIT: 575 *bits = 8; 576 break; 577 case LINE_CR_7BIT: 578 *bits = 7; 579 break; 580 case LINE_CR_6BIT: 581 *bits = 6; 582 break; 583 case LINE_CR_5BIT: 584 *bits = 5; 585 break; 586 } 587 588 if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) 589 *flow = 'r'; 590} 591 592static int __init 593netx_console_setup(struct console *co, char *options) 594{ 595 struct netx_port *sport; 596 int baud = 9600; 597 int bits = 8; 598 int parity = 'n'; 599 int flow = 'n'; 600 601 /* 602 * Check whether an invalid uart number has been specified, and 603 * if so, search for the first available port that does have 604 * console support. 605 */ 606 if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) 607 co->index = 0; 608 sport = &netx_ports[co->index]; 609 610 if (options) { 611 uart_parse_options(options, &baud, &parity, &bits, &flow); 612 } else { 613 /* if the UART is enabled, assume it has been correctly setup 614 * by the bootloader and get the options 615 */ 616 if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { 617 netx_console_get_options(&sport->port, &baud, 618 &parity, &bits, &flow); 619 } 620 621 } 622 623 return uart_set_options(&sport->port, co, baud, parity, bits, flow); 624} 625 626static struct uart_driver netx_reg; 627static struct console netx_console = { 628 .name = "ttyNX", 629 .write = netx_console_write, 630 .device = uart_console_device, 631 .setup = netx_console_setup, 632 .flags = CON_PRINTBUFFER, 633 .index = -1, 634 .data = &netx_reg, 635}; 636 637static int __init netx_console_init(void) 638{ 639 register_console(&netx_console); 640 return 0; 641} 642console_initcall(netx_console_init); 643 644#define NETX_CONSOLE &netx_console 645#else 646#define NETX_CONSOLE NULL 647#endif 648 649static struct uart_driver netx_reg = { 650 .owner = THIS_MODULE, 651 .driver_name = DRIVER_NAME, 652 .dev_name = "ttyNX", 653 .major = SERIAL_NX_MAJOR, 654 .minor = MINOR_START, 655 .nr = ARRAY_SIZE(netx_ports), 656 .cons = NETX_CONSOLE, 657}; 658 659static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) 660{ 661 struct netx_port *sport = platform_get_drvdata(pdev); 662 663 if (sport) 664 uart_suspend_port(&netx_reg, &sport->port); 665 666 return 0; 667} 668 669static int serial_netx_resume(struct platform_device *pdev) 670{ 671 struct netx_port *sport = platform_get_drvdata(pdev); 672 673 if (sport) 674 uart_resume_port(&netx_reg, &sport->port); 675 676 return 0; 677} 678 679static int serial_netx_probe(struct platform_device *pdev) 680{ 681 struct uart_port *port = &netx_ports[pdev->id].port; 682 683 dev_info(&pdev->dev, "initialising\n"); 684 685 port->dev = &pdev->dev; 686 687 writel(1, port->membase + UART_RXFIFO_IRQLEVEL); 688 uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); 689 platform_set_drvdata(pdev, &netx_ports[pdev->id]); 690 691 return 0; 692} 693 694static int serial_netx_remove(struct platform_device *pdev) 695{ 696 struct netx_port *sport = platform_get_drvdata(pdev); 697 698 if (sport) 699 uart_remove_one_port(&netx_reg, &sport->port); 700 701 return 0; 702} 703 704static struct platform_driver serial_netx_driver = { 705 .probe = serial_netx_probe, 706 .remove = serial_netx_remove, 707 708 .suspend = serial_netx_suspend, 709 .resume = serial_netx_resume, 710 711 .driver = { 712 .name = DRIVER_NAME, 713 }, 714}; 715 716static int __init netx_serial_init(void) 717{ 718 int ret; 719 720 printk(KERN_INFO "Serial: NetX driver\n"); 721 722 ret = uart_register_driver(&netx_reg); 723 if (ret) 724 return ret; 725 726 ret = platform_driver_register(&serial_netx_driver); 727 if (ret != 0) 728 uart_unregister_driver(&netx_reg); 729 730 return 0; 731} 732 733static void __exit netx_serial_exit(void) 734{ 735 platform_driver_unregister(&serial_netx_driver); 736 uart_unregister_driver(&netx_reg); 737} 738 739module_init(netx_serial_init); 740module_exit(netx_serial_exit); 741 742MODULE_AUTHOR("Sascha Hauer"); 743MODULE_DESCRIPTION("NetX serial port driver"); 744MODULE_LICENSE("GPL"); 745MODULE_ALIAS("platform:" DRIVER_NAME); 746