| /linux-4.1.27/drivers/net/ |
| D | mii.c | 58 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0; in mii_ethtool_gset() local
169 u32 bmcr, advert, tmp; in mii_ethtool_sset() local
206 u32 bmcr, tmp; in mii_ethtool_sset() local
270 int bmcr; in mii_nway_restart() local
|
| /linux-4.1.27/drivers/net/phy/ |
| D | icplus.c | 105 int bmcr; in ip1xx_reset() local
|
| D | lxt.c | 219 int bmcr = phy_read(phydev, MII_BMCR); in lxt973a2_read_status() local
|
| D | national.c | 99 int bmcr = phy_read(phydev, MII_BMCR); in ns_giga_speed_fallback() local
|
| D | marvell.c | 209 int bmcr; in marvell_config_aneg() local
795 int bmcr = phy_read(phydev, MII_BMCR); in marvell_read_status() local
|
| D | fixed_phy.c | 51 u16 bmcr = 0; in fixed_phy_update_regs() local
|
| D | at803x.c | 56 u16 bmcr; member
|
| D | phy_device.c | 1028 int bmcr = phy_read(phydev, MII_BMCR); in genphy_read_status() local
|
| /linux-4.1.27/drivers/net/ethernet/chelsio/cxgb3/ |
| D | vsc8211.c | 133 unsigned int bmcr, status, lpa, adv; in vsc8211_get_link_status() local
209 unsigned int bmcr, status, lpa, adv; in vsc8211_get_link_status_fiber() local
|
| /linux-4.1.27/drivers/net/ethernet/dlink/ |
| D | dl2k.c | 1455 __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR); in mii_get_media() local
1488 __u16 bmcr; in mii_set_media() local
1609 __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); in mii_get_media_pcs() local
1632 __u16 bmcr; in mii_set_media_pcs() local
|
| /linux-4.1.27/drivers/net/ethernet/ |
| D | jme.c | 421 u32 phylink, cnt = JME_SPDRSV_TIMEOUT, bmcr; in jme_check_link() local
1637 u32 bmcr; in jme_restart_an() local
1725 u32 bmcr; in jme_phy_on() local
1738 u32 bmcr; in jme_phy_off() local
1898 u32 bmcr, tmp; in jme_set_100m_half() local
3004 u16 bmcr, bmsr; in jme_init_one() local
|
| /linux-4.1.27/drivers/net/ethernet/smsc/ |
| D | smc911x.c | 745 int bmcr; in smc911x_phy_fixed() local
831 unsigned int bmcr; in smc911x_phy_powerdown() local
851 unsigned int bmcr, cr; in smc911x_phy_check_media() local
|
| D | smc91x.c | 916 int bmcr, cfg1; in smc_phy_fixed() local
964 unsigned int bmcr; in smc_phy_reset() local
991 unsigned int bmcr; in smc_phy_powerdown() local
|
| /linux-4.1.27/drivers/net/ethernet/ibm/emac/ |
| D | phy.c | 258 int bmcr = phy_read(phy, MII_BMCR); in genmii_read_link() local
|
| /linux-4.1.27/drivers/net/ethernet/broadcom/ |
| D | bnx2.c | 1161 u32 bmcr, local_adv, remote_adv, common; in bnx2_5706s_linkup() local
1198 u32 bmcr; in bnx2_copper_linkup() local
1599 u32 bmcr; in bnx2_set_link() local
1743 u32 adv, bmcr; in bnx2_setup_serdes_phy() local
2061 u32 bmcr, adv_reg, new_adv = 0; in bnx2_setup_copper_phy() local
6067 u32 bmcr; in bnx2_5706_serdes_timer() local
6089 u32 bmcr; in bnx2_5706_serdes_timer() local
6134 u32 bmcr; in bnx2_5708_serdes_timer() local
7125 u32 bmcr; in bnx2_nway_reset() local
|
| D | b44.c | 479 u32 bmcr; in b44_setup_phy() local
1818 u32 bmcr; in b44_nway_reset() local
|
| D | tg3.c | 4445 u32 bmcr, orig_bmcr; in tg3_phy_copper_begin() local
4889 u32 aux_stat, bmcr; in tg3_setup_copper_phy() local
5808 u32 bmsr, bmcr; in tg3_setup_fiber_mii_phy() local
6009 u32 bmcr; in tg3_serdes_parallel_detect() local
6047 u32 bmcr; in tg3_serdes_parallel_detect() local
8181 u32 val, bmcr, mac_mode, ptest = 0; in tg3_phy_lpbk_set() local
12316 u32 bmcr; in tg3_nway_reset() local
|
| /linux-4.1.27/drivers/net/ethernet/xilinx/ |
| D | xilinx_emaclite.c | 909 u32 bmcr; in xemaclite_open() local
|
| /linux-4.1.27/drivers/net/ethernet/nvidia/ |
| D | forcedeth.c | 3307 u32 bmcr; in nv_update_linkspeed() local
4389 int adv, bmcr; in nv_set_settings() local
4434 int adv, bmcr; in nv_set_settings() local
4524 int bmcr; in nv_nway_reset() local
4700 int adv, bmcr; in nv_set_pauseparam() local
|
| /linux-4.1.27/drivers/net/ethernet/amd/ |
| D | amd8111e.c | 196 u32 bmcr,advert,tmp; in amd8111e_set_ext_phy() local
|
| D | pcnet32.c | 2135 u16 bmcr; in pcnet32_open() local
2745 u16 bmcr; in pcnet32_check_otherphy() local
|
| /linux-4.1.27/drivers/net/usb/ |
| D | rtl8150.c | 777 short lpa, bmcr; in rtl8150_get_settings() local
|
| D | smsc95xx.c | 832 int bmcr, ret, timeout = 0; in smsc95xx_phy_initialize() local
|
| D | smsc75xx.c | 814 int bmcr, ret, timeout = 0; in smsc75xx_phy_initialize() local
|
| D | r8152.c | 2787 u16 bmcr, anar, gbcr; in rtl8152_set_speed() local
|
| /linux-4.1.27/drivers/net/ethernet/nuvoton/ |
| D | w90p910_ether.c | 209 unsigned int bmsr, bmcr, lpa, speed, duplex; in update_linkspeed() local
|
| /linux-4.1.27/drivers/net/ethernet/silan/ |
| D | sc92031.c | 1315 u16 bmcr; in sc92031_ethtool_nway_reset() local
|
| /linux-4.1.27/drivers/net/ethernet/intel/e1000e/ |
| D | e1000.h | 196 u16 bmcr; /* basic mode control register */ member
|
| /linux-4.1.27/drivers/net/ethernet/oki-semi/pch_gbe/ |
| D | pch_gbe_main.c | 664 u16 bmcr, stat; in pch_gbe_init_phy() local
|
| /linux-4.1.27/drivers/net/ethernet/sun/ |
| D | niu.c | 1096 int bmsr, advert, ctrl1000, stat1000, lpa, bmcr, estatus; in link_status_mii() local
1674 u16 bmcr, bmsr, estat; in xcvr_init_1g_rgmii() local
1733 u16 bmcr, bmsr, adv, estat; in mii_init_common() local
|
| D | cassini.c | 4541 u16 bmcr; in cas_get_settings() local
|
| /linux-4.1.27/drivers/net/ethernet/natsemi/ |
| D | natsemi.c | 1292 u16 bmcr; in switch_port_internal() local
|
| /linux-4.1.27/drivers/net/ethernet/intel/ |
| D | e100.c | 1466 u16 bmcr, stat, id_lo, id_hi, cong; in e100_phy_init() local
|
| /linux-4.1.27/drivers/net/ethernet/realtek/ |
| D | r8169.c | 1904 int giga_ctrl, bmcr; in rtl8169_set_speed_xmii() local
|