1 2/* Advanced Micro Devices Inc. AMD8111E Linux Network Driver 3 * Copyright (C) 2004 Advanced Micro Devices 4 * 5 * 6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ] 7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c] 8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ] 9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker. 10 * Copyright 1993 United States Government as represented by the 11 * Director, National Security Agency.[ pcnet32.c ] 12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ] 13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. 14 * 15 * 16 * This program is free software; you can redistribute it and/or modify 17 * it under the terms of the GNU General Public License as published by 18 * the Free Software Foundation; either version 2 of the License, or 19 * (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * You should have received a copy of the GNU General Public License 27 * along with this program; if not, see <http://www.gnu.org/licenses/>. 28 29Module Name: 30 31 amd8111e.c 32 33Abstract: 34 35 AMD8111 based 10/100 Ethernet Controller Driver. 36 37Environment: 38 39 Kernel Mode 40 41Revision History: 42 3.0.0 43 Initial Revision. 44 3.0.1 45 1. Dynamic interrupt coalescing. 46 2. Removed prev_stats. 47 3. MII support. 48 4. Dynamic IPG support 49 3.0.2 05/29/2003 50 1. Bug fix: Fixed failure to send jumbo packets larger than 4k. 51 2. Bug fix: Fixed VLAN support failure. 52 3. Bug fix: Fixed receive interrupt coalescing bug. 53 4. Dynamic IPG support is disabled by default. 54 3.0.3 06/05/2003 55 1. Bug fix: Fixed failure to close the interface if SMP is enabled. 56 3.0.4 12/09/2003 57 1. Added set_mac_address routine for bonding driver support. 58 2. Tested the driver for bonding support 59 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth 60 indicated to the h/w. 61 4. Modified amd8111e_rx() routine to receive all the received packets 62 in the first interrupt. 63 5. Bug fix: Corrected rx_errors reported in get_stats() function. 64 3.0.5 03/22/2004 65 1. Added NAPI support 66 67*/ 68 69 70#include <linux/module.h> 71#include <linux/kernel.h> 72#include <linux/types.h> 73#include <linux/compiler.h> 74#include <linux/delay.h> 75#include <linux/interrupt.h> 76#include <linux/ioport.h> 77#include <linux/pci.h> 78#include <linux/netdevice.h> 79#include <linux/etherdevice.h> 80#include <linux/skbuff.h> 81#include <linux/ethtool.h> 82#include <linux/mii.h> 83#include <linux/if_vlan.h> 84#include <linux/ctype.h> 85#include <linux/crc32.h> 86#include <linux/dma-mapping.h> 87 88#include <asm/io.h> 89#include <asm/byteorder.h> 90#include <asm/uaccess.h> 91 92#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) 93#define AMD8111E_VLAN_TAG_USED 1 94#else 95#define AMD8111E_VLAN_TAG_USED 0 96#endif 97 98#include "amd8111e.h" 99#define MODULE_NAME "amd8111e" 100#define MODULE_VERS "3.0.7" 101MODULE_AUTHOR("Advanced Micro Devices, Inc."); 102MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS); 103MODULE_LICENSE("GPL"); 104module_param_array(speed_duplex, int, NULL, 0); 105MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex"); 106module_param_array(coalesce, bool, NULL, 0); 107MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable"); 108module_param_array(dynamic_ipg, bool, NULL, 0); 109MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable"); 110 111/* This function will read the PHY registers. */ 112static int amd8111e_read_phy(struct amd8111e_priv *lp, 113 int phy_id, int reg, u32 *val) 114{ 115 void __iomem *mmio = lp->mmio; 116 unsigned int reg_val; 117 unsigned int repeat= REPEAT_CNT; 118 119 reg_val = readl(mmio + PHY_ACCESS); 120 while (reg_val & PHY_CMD_ACTIVE) 121 reg_val = readl( mmio + PHY_ACCESS ); 122 123 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) | 124 ((reg & 0x1f) << 16), mmio +PHY_ACCESS); 125 do{ 126 reg_val = readl(mmio + PHY_ACCESS); 127 udelay(30); /* It takes 30 us to read/write data */ 128 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 129 if(reg_val & PHY_RD_ERR) 130 goto err_phy_read; 131 132 *val = reg_val & 0xffff; 133 return 0; 134err_phy_read: 135 *val = 0; 136 return -EINVAL; 137 138} 139 140/* This function will write into PHY registers. */ 141static int amd8111e_write_phy(struct amd8111e_priv *lp, 142 int phy_id, int reg, u32 val) 143{ 144 unsigned int repeat = REPEAT_CNT; 145 void __iomem *mmio = lp->mmio; 146 unsigned int reg_val; 147 148 reg_val = readl(mmio + PHY_ACCESS); 149 while (reg_val & PHY_CMD_ACTIVE) 150 reg_val = readl( mmio + PHY_ACCESS ); 151 152 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) | 153 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS); 154 155 do{ 156 reg_val = readl(mmio + PHY_ACCESS); 157 udelay(30); /* It takes 30 us to read/write the data */ 158 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 159 160 if(reg_val & PHY_RD_ERR) 161 goto err_phy_write; 162 163 return 0; 164 165err_phy_write: 166 return -EINVAL; 167 168} 169 170/* This is the mii register read function provided to the mii interface. */ 171static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num) 172{ 173 struct amd8111e_priv *lp = netdev_priv(dev); 174 unsigned int reg_val; 175 176 amd8111e_read_phy(lp,phy_id,reg_num,®_val); 177 return reg_val; 178 179} 180 181/* This is the mii register write function provided to the mii interface. */ 182static void amd8111e_mdio_write(struct net_device *dev, 183 int phy_id, int reg_num, int val) 184{ 185 struct amd8111e_priv *lp = netdev_priv(dev); 186 187 amd8111e_write_phy(lp, phy_id, reg_num, val); 188} 189 190/* This function will set PHY speed. During initialization sets 191 * the original speed to 100 full 192 */ 193static void amd8111e_set_ext_phy(struct net_device *dev) 194{ 195 struct amd8111e_priv *lp = netdev_priv(dev); 196 u32 bmcr,advert,tmp; 197 198 /* Determine mii register values to set the speed */ 199 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE); 200 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); 201 switch (lp->ext_phy_option){ 202 203 default: 204 case SPEED_AUTONEG: /* advertise all values */ 205 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL| 206 ADVERTISE_100HALF|ADVERTISE_100FULL) ; 207 break; 208 case SPEED10_HALF: 209 tmp |= ADVERTISE_10HALF; 210 break; 211 case SPEED10_FULL: 212 tmp |= ADVERTISE_10FULL; 213 break; 214 case SPEED100_HALF: 215 tmp |= ADVERTISE_100HALF; 216 break; 217 case SPEED100_FULL: 218 tmp |= ADVERTISE_100FULL; 219 break; 220 } 221 222 if(advert != tmp) 223 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp); 224 /* Restart auto negotiation */ 225 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR); 226 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 227 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr); 228 229} 230 231/* This function will unmap skb->data space and will free 232 * all transmit and receive skbuffs. 233 */ 234static int amd8111e_free_skbs(struct net_device *dev) 235{ 236 struct amd8111e_priv *lp = netdev_priv(dev); 237 struct sk_buff *rx_skbuff; 238 int i; 239 240 /* Freeing transmit skbs */ 241 for(i = 0; i < NUM_TX_BUFFERS; i++){ 242 if(lp->tx_skbuff[i]){ 243 pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE); 244 dev_kfree_skb (lp->tx_skbuff[i]); 245 lp->tx_skbuff[i] = NULL; 246 lp->tx_dma_addr[i] = 0; 247 } 248 } 249 /* Freeing previously allocated receive buffers */ 250 for (i = 0; i < NUM_RX_BUFFERS; i++){ 251 rx_skbuff = lp->rx_skbuff[i]; 252 if(rx_skbuff != NULL){ 253 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i], 254 lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE); 255 dev_kfree_skb(lp->rx_skbuff[i]); 256 lp->rx_skbuff[i] = NULL; 257 lp->rx_dma_addr[i] = 0; 258 } 259 } 260 261 return 0; 262} 263 264/* This will set the receive buffer length corresponding 265 * to the mtu size of networkinterface. 266 */ 267static inline void amd8111e_set_rx_buff_len(struct net_device *dev) 268{ 269 struct amd8111e_priv *lp = netdev_priv(dev); 270 unsigned int mtu = dev->mtu; 271 272 if (mtu > ETH_DATA_LEN){ 273 /* MTU + ethernet header + FCS 274 * + optional VLAN tag + skb reserve space 2 275 */ 276 lp->rx_buff_len = mtu + ETH_HLEN + 10; 277 lp->options |= OPTION_JUMBO_ENABLE; 278 } else{ 279 lp->rx_buff_len = PKT_BUFF_SZ; 280 lp->options &= ~OPTION_JUMBO_ENABLE; 281 } 282} 283 284/* This function will free all the previously allocated buffers, 285 * determine new receive buffer length and will allocate new receive buffers. 286 * This function also allocates and initializes both the transmitter 287 * and receive hardware descriptors. 288 */ 289static int amd8111e_init_ring(struct net_device *dev) 290{ 291 struct amd8111e_priv *lp = netdev_priv(dev); 292 int i; 293 294 lp->rx_idx = lp->tx_idx = 0; 295 lp->tx_complete_idx = 0; 296 lp->tx_ring_idx = 0; 297 298 299 if(lp->opened) 300 /* Free previously allocated transmit and receive skbs */ 301 amd8111e_free_skbs(dev); 302 303 else{ 304 /* allocate the tx and rx descriptors */ 305 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, 306 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, 307 &lp->tx_ring_dma_addr)) == NULL) 308 309 goto err_no_mem; 310 311 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, 312 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, 313 &lp->rx_ring_dma_addr)) == NULL) 314 315 goto err_free_tx_ring; 316 317 } 318 /* Set new receive buff size */ 319 amd8111e_set_rx_buff_len(dev); 320 321 /* Allocating receive skbs */ 322 for (i = 0; i < NUM_RX_BUFFERS; i++) { 323 324 lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len); 325 if (!lp->rx_skbuff[i]) { 326 /* Release previos allocated skbs */ 327 for(--i; i >= 0 ;i--) 328 dev_kfree_skb(lp->rx_skbuff[i]); 329 goto err_free_rx_ring; 330 } 331 skb_reserve(lp->rx_skbuff[i],2); 332 } 333 /* Initilaizing receive descriptors */ 334 for (i = 0; i < NUM_RX_BUFFERS; i++) { 335 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, 336 lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); 337 338 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]); 339 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2); 340 wmb(); 341 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT); 342 } 343 344 /* Initializing transmit descriptors */ 345 for (i = 0; i < NUM_TX_RING_DR; i++) { 346 lp->tx_ring[i].buff_phy_addr = 0; 347 lp->tx_ring[i].tx_flags = 0; 348 lp->tx_ring[i].buff_count = 0; 349 } 350 351 return 0; 352 353err_free_rx_ring: 354 355 pci_free_consistent(lp->pci_dev, 356 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring, 357 lp->rx_ring_dma_addr); 358 359err_free_tx_ring: 360 361 pci_free_consistent(lp->pci_dev, 362 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring, 363 lp->tx_ring_dma_addr); 364 365err_no_mem: 366 return -ENOMEM; 367} 368 369/* This function will set the interrupt coalescing according 370 * to the input arguments 371 */ 372static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod) 373{ 374 unsigned int timeout; 375 unsigned int event_count; 376 377 struct amd8111e_priv *lp = netdev_priv(dev); 378 void __iomem *mmio = lp->mmio; 379 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 380 381 382 switch(cmod) 383 { 384 case RX_INTR_COAL : 385 timeout = coal_conf->rx_timeout; 386 event_count = coal_conf->rx_event_count; 387 if( timeout > MAX_TIMEOUT || 388 event_count > MAX_EVENT_COUNT ) 389 return -EINVAL; 390 391 timeout = timeout * DELAY_TIMER_CONV; 392 writel(VAL0|STINTEN, mmio+INTEN0); 393 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout, 394 mmio+DLY_INT_A); 395 break; 396 397 case TX_INTR_COAL : 398 timeout = coal_conf->tx_timeout; 399 event_count = coal_conf->tx_event_count; 400 if( timeout > MAX_TIMEOUT || 401 event_count > MAX_EVENT_COUNT ) 402 return -EINVAL; 403 404 405 timeout = timeout * DELAY_TIMER_CONV; 406 writel(VAL0|STINTEN,mmio+INTEN0); 407 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout, 408 mmio+DLY_INT_B); 409 break; 410 411 case DISABLE_COAL: 412 writel(0,mmio+STVAL); 413 writel(STINTEN, mmio+INTEN0); 414 writel(0, mmio +DLY_INT_B); 415 writel(0, mmio+DLY_INT_A); 416 break; 417 case ENABLE_COAL: 418 /* Start the timer */ 419 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */ 420 writel(VAL0|STINTEN, mmio+INTEN0); 421 break; 422 default: 423 break; 424 425 } 426 return 0; 427 428} 429 430/* This function initializes the device registers and starts the device. */ 431static int amd8111e_restart(struct net_device *dev) 432{ 433 struct amd8111e_priv *lp = netdev_priv(dev); 434 void __iomem *mmio = lp->mmio; 435 int i,reg_val; 436 437 /* stop the chip */ 438 writel(RUN, mmio + CMD0); 439 440 if(amd8111e_init_ring(dev)) 441 return -ENOMEM; 442 443 /* enable the port manager and set auto negotiation always */ 444 writel((u32) VAL1|EN_PMGR, mmio + CMD3 ); 445 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2); 446 447 amd8111e_set_ext_phy(dev); 448 449 /* set control registers */ 450 reg_val = readl(mmio + CTRL1); 451 reg_val &= ~XMTSP_MASK; 452 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 ); 453 454 /* enable interrupt */ 455 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN | 456 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN | 457 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0); 458 459 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0); 460 461 /* initialize tx and rx ring base addresses */ 462 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0); 463 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0); 464 465 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0); 466 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0); 467 468 /* set default IPG to 96 */ 469 writew((u32)DEFAULT_IPG,mmio+IPG); 470 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1); 471 472 if(lp->options & OPTION_JUMBO_ENABLE){ 473 writel((u32)VAL2|JUMBO, mmio + CMD3); 474 /* Reset REX_UFLO */ 475 writel( REX_UFLO, mmio + CMD2); 476 /* Should not set REX_UFLO for jumbo frames */ 477 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2); 478 }else{ 479 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2); 480 writel((u32)JUMBO, mmio + CMD3); 481 } 482 483#if AMD8111E_VLAN_TAG_USED 484 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3); 485#endif 486 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 ); 487 488 /* Setting the MAC address to the device */ 489 for (i = 0; i < ETH_ALEN; i++) 490 writeb( dev->dev_addr[i], mmio + PADR + i ); 491 492 /* Enable interrupt coalesce */ 493 if(lp->options & OPTION_INTR_COAL_ENABLE){ 494 netdev_info(dev, "Interrupt Coalescing Enabled.\n"); 495 amd8111e_set_coalesce(dev,ENABLE_COAL); 496 } 497 498 /* set RUN bit to start the chip */ 499 writel(VAL2 | RDMD0, mmio + CMD0); 500 writel(VAL0 | INTREN | RUN, mmio + CMD0); 501 502 /* To avoid PCI posting bug */ 503 readl(mmio+CMD0); 504 return 0; 505} 506 507/* This function clears necessary the device registers. */ 508static void amd8111e_init_hw_default(struct amd8111e_priv *lp) 509{ 510 unsigned int reg_val; 511 unsigned int logic_filter[2] ={0,}; 512 void __iomem *mmio = lp->mmio; 513 514 515 /* stop the chip */ 516 writel(RUN, mmio + CMD0); 517 518 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */ 519 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0); 520 521 /* Clear RCV_RING_BASE_ADDR */ 522 writel(0, mmio + RCV_RING_BASE_ADDR0); 523 524 /* Clear XMT_RING_BASE_ADDR */ 525 writel(0, mmio + XMT_RING_BASE_ADDR0); 526 writel(0, mmio + XMT_RING_BASE_ADDR1); 527 writel(0, mmio + XMT_RING_BASE_ADDR2); 528 writel(0, mmio + XMT_RING_BASE_ADDR3); 529 530 /* Clear CMD0 */ 531 writel(CMD0_CLEAR,mmio + CMD0); 532 533 /* Clear CMD2 */ 534 writel(CMD2_CLEAR, mmio +CMD2); 535 536 /* Clear CMD7 */ 537 writel(CMD7_CLEAR , mmio + CMD7); 538 539 /* Clear DLY_INT_A and DLY_INT_B */ 540 writel(0x0, mmio + DLY_INT_A); 541 writel(0x0, mmio + DLY_INT_B); 542 543 /* Clear FLOW_CONTROL */ 544 writel(0x0, mmio + FLOW_CONTROL); 545 546 /* Clear INT0 write 1 to clear register */ 547 reg_val = readl(mmio + INT0); 548 writel(reg_val, mmio + INT0); 549 550 /* Clear STVAL */ 551 writel(0x0, mmio + STVAL); 552 553 /* Clear INTEN0 */ 554 writel( INTEN0_CLEAR, mmio + INTEN0); 555 556 /* Clear LADRF */ 557 writel(0x0 , mmio + LADRF); 558 559 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */ 560 writel( 0x80010,mmio + SRAM_SIZE); 561 562 /* Clear RCV_RING0_LEN */ 563 writel(0x0, mmio + RCV_RING_LEN0); 564 565 /* Clear XMT_RING0/1/2/3_LEN */ 566 writel(0x0, mmio + XMT_RING_LEN0); 567 writel(0x0, mmio + XMT_RING_LEN1); 568 writel(0x0, mmio + XMT_RING_LEN2); 569 writel(0x0, mmio + XMT_RING_LEN3); 570 571 /* Clear XMT_RING_LIMIT */ 572 writel(0x0, mmio + XMT_RING_LIMIT); 573 574 /* Clear MIB */ 575 writew(MIB_CLEAR, mmio + MIB_ADDR); 576 577 /* Clear LARF */ 578 amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF); 579 580 /* SRAM_SIZE register */ 581 reg_val = readl(mmio + SRAM_SIZE); 582 583 if(lp->options & OPTION_JUMBO_ENABLE) 584 writel( VAL2|JUMBO, mmio + CMD3); 585#if AMD8111E_VLAN_TAG_USED 586 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 ); 587#endif 588 /* Set default value to CTRL1 Register */ 589 writel(CTRL1_DEFAULT, mmio + CTRL1); 590 591 /* To avoid PCI posting bug */ 592 readl(mmio + CMD2); 593 594} 595 596/* This function disables the interrupt and clears all the pending 597 * interrupts in INT0 598 */ 599static void amd8111e_disable_interrupt(struct amd8111e_priv *lp) 600{ 601 u32 intr0; 602 603 /* Disable interrupt */ 604 writel(INTREN, lp->mmio + CMD0); 605 606 /* Clear INT0 */ 607 intr0 = readl(lp->mmio + INT0); 608 writel(intr0, lp->mmio + INT0); 609 610 /* To avoid PCI posting bug */ 611 readl(lp->mmio + INT0); 612 613} 614 615/* This function stops the chip. */ 616static void amd8111e_stop_chip(struct amd8111e_priv *lp) 617{ 618 writel(RUN, lp->mmio + CMD0); 619 620 /* To avoid PCI posting bug */ 621 readl(lp->mmio + CMD0); 622} 623 624/* This function frees the transmiter and receiver descriptor rings. */ 625static void amd8111e_free_ring(struct amd8111e_priv *lp) 626{ 627 /* Free transmit and receive descriptor rings */ 628 if(lp->rx_ring){ 629 pci_free_consistent(lp->pci_dev, 630 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, 631 lp->rx_ring, lp->rx_ring_dma_addr); 632 lp->rx_ring = NULL; 633 } 634 635 if(lp->tx_ring){ 636 pci_free_consistent(lp->pci_dev, 637 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, 638 lp->tx_ring, lp->tx_ring_dma_addr); 639 640 lp->tx_ring = NULL; 641 } 642 643} 644 645/* This function will free all the transmit skbs that are actually 646 * transmitted by the device. It will check the ownership of the 647 * skb before freeing the skb. 648 */ 649static int amd8111e_tx(struct net_device *dev) 650{ 651 struct amd8111e_priv *lp = netdev_priv(dev); 652 int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 653 int status; 654 /* Complete all the transmit packet */ 655 while (lp->tx_complete_idx != lp->tx_idx){ 656 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 657 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags); 658 659 if(status & OWN_BIT) 660 break; /* It still hasn't been Txed */ 661 662 lp->tx_ring[tx_index].buff_phy_addr = 0; 663 664 /* We must free the original skb */ 665 if (lp->tx_skbuff[tx_index]) { 666 pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index], 667 lp->tx_skbuff[tx_index]->len, 668 PCI_DMA_TODEVICE); 669 dev_kfree_skb_irq (lp->tx_skbuff[tx_index]); 670 lp->tx_skbuff[tx_index] = NULL; 671 lp->tx_dma_addr[tx_index] = 0; 672 } 673 lp->tx_complete_idx++; 674 /*COAL update tx coalescing parameters */ 675 lp->coal_conf.tx_packets++; 676 lp->coal_conf.tx_bytes += 677 le16_to_cpu(lp->tx_ring[tx_index].buff_count); 678 679 if (netif_queue_stopped(dev) && 680 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){ 681 /* The ring is no longer full, clear tbusy. */ 682 /* lp->tx_full = 0; */ 683 netif_wake_queue (dev); 684 } 685 } 686 return 0; 687} 688 689/* This function handles the driver receive operation in polling mode */ 690static int amd8111e_rx_poll(struct napi_struct *napi, int budget) 691{ 692 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi); 693 struct net_device *dev = lp->amd8111e_net_dev; 694 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK; 695 void __iomem *mmio = lp->mmio; 696 struct sk_buff *skb,*new_skb; 697 int min_pkt_len, status; 698 unsigned int intr0; 699 int num_rx_pkt = 0; 700 short pkt_len; 701#if AMD8111E_VLAN_TAG_USED 702 short vtag; 703#endif 704 int rx_pkt_limit = budget; 705 unsigned long flags; 706 707 if (rx_pkt_limit <= 0) 708 goto rx_not_empty; 709 710 do{ 711 /* process receive packets until we use the quota. 712 * If we own the next entry, it's a new packet. Send it up. 713 */ 714 while(1) { 715 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags); 716 if (status & OWN_BIT) 717 break; 718 719 /* There is a tricky error noted by John Murphy, 720 * <murf@perftech.com> to Russ Nelson: Even with 721 * full-sized * buffers it's possible for a 722 * jabber packet to use two buffers, with only 723 * the last correctly noting the error. 724 */ 725 if(status & ERR_BIT) { 726 /* resetting flags */ 727 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 728 goto err_next_pkt; 729 } 730 /* check for STP and ENP */ 731 if(!((status & STP_BIT) && (status & ENP_BIT))){ 732 /* resetting flags */ 733 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 734 goto err_next_pkt; 735 } 736 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4; 737 738#if AMD8111E_VLAN_TAG_USED 739 vtag = status & TT_MASK; 740 /*MAC will strip vlan tag*/ 741 if (vtag != 0) 742 min_pkt_len =MIN_PKT_LEN - 4; 743 else 744#endif 745 min_pkt_len =MIN_PKT_LEN; 746 747 if (pkt_len < min_pkt_len) { 748 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 749 lp->drv_rx_errors++; 750 goto err_next_pkt; 751 } 752 if(--rx_pkt_limit < 0) 753 goto rx_not_empty; 754 new_skb = netdev_alloc_skb(dev, lp->rx_buff_len); 755 if (!new_skb) { 756 /* if allocation fail, 757 * ignore that pkt and go to next one 758 */ 759 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 760 lp->drv_rx_errors++; 761 goto err_next_pkt; 762 } 763 764 skb_reserve(new_skb, 2); 765 skb = lp->rx_skbuff[rx_index]; 766 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index], 767 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); 768 skb_put(skb, pkt_len); 769 lp->rx_skbuff[rx_index] = new_skb; 770 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev, 771 new_skb->data, 772 lp->rx_buff_len-2, 773 PCI_DMA_FROMDEVICE); 774 775 skb->protocol = eth_type_trans(skb, dev); 776 777#if AMD8111E_VLAN_TAG_USED 778 if (vtag == TT_VLAN_TAGGED){ 779 u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info); 780 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); 781 } 782#endif 783 netif_receive_skb(skb); 784 /*COAL update rx coalescing parameters*/ 785 lp->coal_conf.rx_packets++; 786 lp->coal_conf.rx_bytes += pkt_len; 787 num_rx_pkt++; 788 789 err_next_pkt: 790 lp->rx_ring[rx_index].buff_phy_addr 791 = cpu_to_le32(lp->rx_dma_addr[rx_index]); 792 lp->rx_ring[rx_index].buff_count = 793 cpu_to_le16(lp->rx_buff_len-2); 794 wmb(); 795 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT); 796 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK; 797 } 798 /* Check the interrupt status register for more packets in the 799 * mean time. Process them since we have not used up our quota. 800 */ 801 intr0 = readl(mmio + INT0); 802 /*Ack receive packets */ 803 writel(intr0 & RINT0,mmio + INT0); 804 805 } while(intr0 & RINT0); 806 807 if (rx_pkt_limit > 0) { 808 /* Receive descriptor is empty now */ 809 spin_lock_irqsave(&lp->lock, flags); 810 __napi_complete(napi); 811 writel(VAL0|RINTEN0, mmio + INTEN0); 812 writel(VAL2 | RDMD0, mmio + CMD0); 813 spin_unlock_irqrestore(&lp->lock, flags); 814 } 815 816rx_not_empty: 817 return num_rx_pkt; 818} 819 820/* This function will indicate the link status to the kernel. */ 821static int amd8111e_link_change(struct net_device *dev) 822{ 823 struct amd8111e_priv *lp = netdev_priv(dev); 824 int status0,speed; 825 826 /* read the link change */ 827 status0 = readl(lp->mmio + STAT0); 828 829 if(status0 & LINK_STATS){ 830 if(status0 & AUTONEG_COMPLETE) 831 lp->link_config.autoneg = AUTONEG_ENABLE; 832 else 833 lp->link_config.autoneg = AUTONEG_DISABLE; 834 835 if(status0 & FULL_DPLX) 836 lp->link_config.duplex = DUPLEX_FULL; 837 else 838 lp->link_config.duplex = DUPLEX_HALF; 839 speed = (status0 & SPEED_MASK) >> 7; 840 if(speed == PHY_SPEED_10) 841 lp->link_config.speed = SPEED_10; 842 else if(speed == PHY_SPEED_100) 843 lp->link_config.speed = SPEED_100; 844 845 netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n", 846 (lp->link_config.speed == SPEED_100) ? 847 "100" : "10", 848 (lp->link_config.duplex == DUPLEX_FULL) ? 849 "Full" : "Half"); 850 851 netif_carrier_on(dev); 852 } 853 else{ 854 lp->link_config.speed = SPEED_INVALID; 855 lp->link_config.duplex = DUPLEX_INVALID; 856 lp->link_config.autoneg = AUTONEG_INVALID; 857 netdev_info(dev, "Link is Down.\n"); 858 netif_carrier_off(dev); 859 } 860 861 return 0; 862} 863 864/* This function reads the mib counters. */ 865static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER) 866{ 867 unsigned int status; 868 unsigned int data; 869 unsigned int repeat = REPEAT_CNT; 870 871 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR); 872 do { 873 status = readw(mmio + MIB_ADDR); 874 udelay(2); /* controller takes MAX 2 us to get mib data */ 875 } 876 while (--repeat && (status & MIB_CMD_ACTIVE)); 877 878 data = readl(mmio + MIB_DATA); 879 return data; 880} 881 882/* This function reads the mib registers and returns the hardware statistics. 883 * It updates previous internal driver statistics with new values. 884 */ 885static struct net_device_stats *amd8111e_get_stats(struct net_device *dev) 886{ 887 struct amd8111e_priv *lp = netdev_priv(dev); 888 void __iomem *mmio = lp->mmio; 889 unsigned long flags; 890 struct net_device_stats *new_stats = &dev->stats; 891 892 if (!lp->opened) 893 return new_stats; 894 spin_lock_irqsave (&lp->lock, flags); 895 896 /* stats.rx_packets */ 897 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+ 898 amd8111e_read_mib(mmio, rcv_multicast_pkts)+ 899 amd8111e_read_mib(mmio, rcv_unicast_pkts); 900 901 /* stats.tx_packets */ 902 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets); 903 904 /*stats.rx_bytes */ 905 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets); 906 907 /* stats.tx_bytes */ 908 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets); 909 910 /* stats.rx_errors */ 911 /* hw errors + errors driver reported */ 912 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 913 amd8111e_read_mib(mmio, rcv_fragments)+ 914 amd8111e_read_mib(mmio, rcv_jabbers)+ 915 amd8111e_read_mib(mmio, rcv_alignment_errors)+ 916 amd8111e_read_mib(mmio, rcv_fcs_errors)+ 917 amd8111e_read_mib(mmio, rcv_miss_pkts)+ 918 lp->drv_rx_errors; 919 920 /* stats.tx_errors */ 921 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 922 923 /* stats.rx_dropped*/ 924 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts); 925 926 /* stats.tx_dropped*/ 927 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts); 928 929 /* stats.multicast*/ 930 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts); 931 932 /* stats.collisions*/ 933 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions); 934 935 /* stats.rx_length_errors*/ 936 new_stats->rx_length_errors = 937 amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 938 amd8111e_read_mib(mmio, rcv_oversize_pkts); 939 940 /* stats.rx_over_errors*/ 941 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 942 943 /* stats.rx_crc_errors*/ 944 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors); 945 946 /* stats.rx_frame_errors*/ 947 new_stats->rx_frame_errors = 948 amd8111e_read_mib(mmio, rcv_alignment_errors); 949 950 /* stats.rx_fifo_errors */ 951 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 952 953 /* stats.rx_missed_errors */ 954 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 955 956 /* stats.tx_aborted_errors*/ 957 new_stats->tx_aborted_errors = 958 amd8111e_read_mib(mmio, xmt_excessive_collision); 959 960 /* stats.tx_carrier_errors*/ 961 new_stats->tx_carrier_errors = 962 amd8111e_read_mib(mmio, xmt_loss_carrier); 963 964 /* stats.tx_fifo_errors*/ 965 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 966 967 /* stats.tx_window_errors*/ 968 new_stats->tx_window_errors = 969 amd8111e_read_mib(mmio, xmt_late_collision); 970 971 /* Reset the mibs for collecting new statistics */ 972 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/ 973 974 spin_unlock_irqrestore (&lp->lock, flags); 975 976 return new_stats; 977} 978 979/* This function recalculate the interrupt coalescing mode on every interrupt 980 * according to the datarate and the packet rate. 981 */ 982static int amd8111e_calc_coalesce(struct net_device *dev) 983{ 984 struct amd8111e_priv *lp = netdev_priv(dev); 985 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 986 int tx_pkt_rate; 987 int rx_pkt_rate; 988 int tx_data_rate; 989 int rx_data_rate; 990 int rx_pkt_size; 991 int tx_pkt_size; 992 993 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets; 994 coal_conf->tx_prev_packets = coal_conf->tx_packets; 995 996 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes; 997 coal_conf->tx_prev_bytes = coal_conf->tx_bytes; 998 999 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets; 1000 coal_conf->rx_prev_packets = coal_conf->rx_packets; 1001 1002 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes; 1003 coal_conf->rx_prev_bytes = coal_conf->rx_bytes; 1004 1005 if(rx_pkt_rate < 800){ 1006 if(coal_conf->rx_coal_type != NO_COALESCE){ 1007 1008 coal_conf->rx_timeout = 0x0; 1009 coal_conf->rx_event_count = 0; 1010 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1011 coal_conf->rx_coal_type = NO_COALESCE; 1012 } 1013 } 1014 else{ 1015 1016 rx_pkt_size = rx_data_rate/rx_pkt_rate; 1017 if (rx_pkt_size < 128){ 1018 if(coal_conf->rx_coal_type != NO_COALESCE){ 1019 1020 coal_conf->rx_timeout = 0; 1021 coal_conf->rx_event_count = 0; 1022 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1023 coal_conf->rx_coal_type = NO_COALESCE; 1024 } 1025 1026 } 1027 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){ 1028 1029 if(coal_conf->rx_coal_type != LOW_COALESCE){ 1030 coal_conf->rx_timeout = 1; 1031 coal_conf->rx_event_count = 4; 1032 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1033 coal_conf->rx_coal_type = LOW_COALESCE; 1034 } 1035 } 1036 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){ 1037 1038 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){ 1039 coal_conf->rx_timeout = 1; 1040 coal_conf->rx_event_count = 4; 1041 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1042 coal_conf->rx_coal_type = MEDIUM_COALESCE; 1043 } 1044 1045 } 1046 else if(rx_pkt_size >= 1024){ 1047 if(coal_conf->rx_coal_type != HIGH_COALESCE){ 1048 coal_conf->rx_timeout = 2; 1049 coal_conf->rx_event_count = 3; 1050 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1051 coal_conf->rx_coal_type = HIGH_COALESCE; 1052 } 1053 } 1054 } 1055 /* NOW FOR TX INTR COALESC */ 1056 if(tx_pkt_rate < 800){ 1057 if(coal_conf->tx_coal_type != NO_COALESCE){ 1058 1059 coal_conf->tx_timeout = 0x0; 1060 coal_conf->tx_event_count = 0; 1061 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1062 coal_conf->tx_coal_type = NO_COALESCE; 1063 } 1064 } 1065 else{ 1066 1067 tx_pkt_size = tx_data_rate/tx_pkt_rate; 1068 if (tx_pkt_size < 128){ 1069 1070 if(coal_conf->tx_coal_type != NO_COALESCE){ 1071 1072 coal_conf->tx_timeout = 0; 1073 coal_conf->tx_event_count = 0; 1074 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1075 coal_conf->tx_coal_type = NO_COALESCE; 1076 } 1077 1078 } 1079 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){ 1080 1081 if(coal_conf->tx_coal_type != LOW_COALESCE){ 1082 coal_conf->tx_timeout = 1; 1083 coal_conf->tx_event_count = 2; 1084 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1085 coal_conf->tx_coal_type = LOW_COALESCE; 1086 1087 } 1088 } 1089 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){ 1090 1091 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){ 1092 coal_conf->tx_timeout = 2; 1093 coal_conf->tx_event_count = 5; 1094 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1095 coal_conf->tx_coal_type = MEDIUM_COALESCE; 1096 } 1097 1098 } 1099 else if(tx_pkt_size >= 1024){ 1100 if (tx_pkt_size >= 1024){ 1101 if(coal_conf->tx_coal_type != HIGH_COALESCE){ 1102 coal_conf->tx_timeout = 4; 1103 coal_conf->tx_event_count = 8; 1104 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1105 coal_conf->tx_coal_type = HIGH_COALESCE; 1106 } 1107 } 1108 } 1109 } 1110 return 0; 1111 1112} 1113 1114/* This is device interrupt function. It handles transmit, 1115 * receive,link change and hardware timer interrupts. 1116 */ 1117static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) 1118{ 1119 1120 struct net_device *dev = (struct net_device *)dev_id; 1121 struct amd8111e_priv *lp = netdev_priv(dev); 1122 void __iomem *mmio = lp->mmio; 1123 unsigned int intr0, intren0; 1124 unsigned int handled = 1; 1125 1126 if(unlikely(dev == NULL)) 1127 return IRQ_NONE; 1128 1129 spin_lock(&lp->lock); 1130 1131 /* disabling interrupt */ 1132 writel(INTREN, mmio + CMD0); 1133 1134 /* Read interrupt status */ 1135 intr0 = readl(mmio + INT0); 1136 intren0 = readl(mmio + INTEN0); 1137 1138 /* Process all the INT event until INTR bit is clear. */ 1139 1140 if (!(intr0 & INTR)){ 1141 handled = 0; 1142 goto err_no_interrupt; 1143 } 1144 1145 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */ 1146 writel(intr0, mmio + INT0); 1147 1148 /* Check if Receive Interrupt has occurred. */ 1149 if (intr0 & RINT0) { 1150 if (napi_schedule_prep(&lp->napi)) { 1151 /* Disable receive interupts */ 1152 writel(RINTEN0, mmio + INTEN0); 1153 /* Schedule a polling routine */ 1154 __napi_schedule(&lp->napi); 1155 } else if (intren0 & RINTEN0) { 1156 netdev_dbg(dev, "************Driver bug! interrupt while in poll\n"); 1157 /* Fix by disable receive interrupts */ 1158 writel(RINTEN0, mmio + INTEN0); 1159 } 1160 } 1161 1162 /* Check if Transmit Interrupt has occurred. */ 1163 if (intr0 & TINT0) 1164 amd8111e_tx(dev); 1165 1166 /* Check if Link Change Interrupt has occurred. */ 1167 if (intr0 & LCINT) 1168 amd8111e_link_change(dev); 1169 1170 /* Check if Hardware Timer Interrupt has occurred. */ 1171 if (intr0 & STINT) 1172 amd8111e_calc_coalesce(dev); 1173 1174err_no_interrupt: 1175 writel( VAL0 | INTREN,mmio + CMD0); 1176 1177 spin_unlock(&lp->lock); 1178 1179 return IRQ_RETVAL(handled); 1180} 1181 1182#ifdef CONFIG_NET_POLL_CONTROLLER 1183static void amd8111e_poll(struct net_device *dev) 1184{ 1185 unsigned long flags; 1186 local_irq_save(flags); 1187 amd8111e_interrupt(0, dev); 1188 local_irq_restore(flags); 1189} 1190#endif 1191 1192 1193/* This function closes the network interface and updates 1194 * the statistics so that most recent statistics will be 1195 * available after the interface is down. 1196 */ 1197static int amd8111e_close(struct net_device *dev) 1198{ 1199 struct amd8111e_priv *lp = netdev_priv(dev); 1200 netif_stop_queue(dev); 1201 1202 napi_disable(&lp->napi); 1203 1204 spin_lock_irq(&lp->lock); 1205 1206 amd8111e_disable_interrupt(lp); 1207 amd8111e_stop_chip(lp); 1208 1209 /* Free transmit and receive skbs */ 1210 amd8111e_free_skbs(lp->amd8111e_net_dev); 1211 1212 netif_carrier_off(lp->amd8111e_net_dev); 1213 1214 /* Delete ipg timer */ 1215 if(lp->options & OPTION_DYN_IPG_ENABLE) 1216 del_timer_sync(&lp->ipg_data.ipg_timer); 1217 1218 spin_unlock_irq(&lp->lock); 1219 free_irq(dev->irq, dev); 1220 amd8111e_free_ring(lp); 1221 1222 /* Update the statistics before closing */ 1223 amd8111e_get_stats(dev); 1224 lp->opened = 0; 1225 return 0; 1226} 1227 1228/* This function opens new interface.It requests irq for the device, 1229 * initializes the device,buffers and descriptors, and starts the device. 1230 */ 1231static int amd8111e_open(struct net_device *dev) 1232{ 1233 struct amd8111e_priv *lp = netdev_priv(dev); 1234 1235 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED, 1236 dev->name, dev)) 1237 return -EAGAIN; 1238 1239 napi_enable(&lp->napi); 1240 1241 spin_lock_irq(&lp->lock); 1242 1243 amd8111e_init_hw_default(lp); 1244 1245 if(amd8111e_restart(dev)){ 1246 spin_unlock_irq(&lp->lock); 1247 napi_disable(&lp->napi); 1248 if (dev->irq) 1249 free_irq(dev->irq, dev); 1250 return -ENOMEM; 1251 } 1252 /* Start ipg timer */ 1253 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1254 add_timer(&lp->ipg_data.ipg_timer); 1255 netdev_info(dev, "Dynamic IPG Enabled\n"); 1256 } 1257 1258 lp->opened = 1; 1259 1260 spin_unlock_irq(&lp->lock); 1261 1262 netif_start_queue(dev); 1263 1264 return 0; 1265} 1266 1267/* This function checks if there is any transmit descriptors 1268 * available to queue more packet. 1269 */ 1270static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp) 1271{ 1272 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK; 1273 if (lp->tx_skbuff[tx_index]) 1274 return -1; 1275 else 1276 return 0; 1277 1278} 1279 1280/* This function will queue the transmit packets to the 1281 * descriptors and will trigger the send operation. It also 1282 * initializes the transmit descriptors with buffer physical address, 1283 * byte count, ownership to hardware etc. 1284 */ 1285static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb, 1286 struct net_device *dev) 1287{ 1288 struct amd8111e_priv *lp = netdev_priv(dev); 1289 int tx_index; 1290 unsigned long flags; 1291 1292 spin_lock_irqsave(&lp->lock, flags); 1293 1294 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK; 1295 1296 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len); 1297 1298 lp->tx_skbuff[tx_index] = skb; 1299 lp->tx_ring[tx_index].tx_flags = 0; 1300 1301#if AMD8111E_VLAN_TAG_USED 1302 if (skb_vlan_tag_present(skb)) { 1303 lp->tx_ring[tx_index].tag_ctrl_cmd |= 1304 cpu_to_le16(TCC_VLAN_INSERT); 1305 lp->tx_ring[tx_index].tag_ctrl_info = 1306 cpu_to_le16(skb_vlan_tag_get(skb)); 1307 1308 } 1309#endif 1310 lp->tx_dma_addr[tx_index] = 1311 pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); 1312 lp->tx_ring[tx_index].buff_phy_addr = 1313 cpu_to_le32(lp->tx_dma_addr[tx_index]); 1314 1315 /* Set FCS and LTINT bits */ 1316 wmb(); 1317 lp->tx_ring[tx_index].tx_flags |= 1318 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT); 1319 1320 lp->tx_idx++; 1321 1322 /* Trigger an immediate send poll. */ 1323 writel( VAL1 | TDMD0, lp->mmio + CMD0); 1324 writel( VAL2 | RDMD0,lp->mmio + CMD0); 1325 1326 if(amd8111e_tx_queue_avail(lp) < 0){ 1327 netif_stop_queue(dev); 1328 } 1329 spin_unlock_irqrestore(&lp->lock, flags); 1330 return NETDEV_TX_OK; 1331} 1332/* This function returns all the memory mapped registers of the device. */ 1333static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) 1334{ 1335 void __iomem *mmio = lp->mmio; 1336 /* Read only necessary registers */ 1337 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0); 1338 buf[1] = readl(mmio + XMT_RING_LEN0); 1339 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0); 1340 buf[3] = readl(mmio + RCV_RING_LEN0); 1341 buf[4] = readl(mmio + CMD0); 1342 buf[5] = readl(mmio + CMD2); 1343 buf[6] = readl(mmio + CMD3); 1344 buf[7] = readl(mmio + CMD7); 1345 buf[8] = readl(mmio + INT0); 1346 buf[9] = readl(mmio + INTEN0); 1347 buf[10] = readl(mmio + LADRF); 1348 buf[11] = readl(mmio + LADRF+4); 1349 buf[12] = readl(mmio + STAT0); 1350} 1351 1352 1353/* This function sets promiscuos mode, all-multi mode or the multicast address 1354 * list to the device. 1355 */ 1356static void amd8111e_set_multicast_list(struct net_device *dev) 1357{ 1358 struct netdev_hw_addr *ha; 1359 struct amd8111e_priv *lp = netdev_priv(dev); 1360 u32 mc_filter[2] ; 1361 int bit_num; 1362 1363 if(dev->flags & IFF_PROMISC){ 1364 writel( VAL2 | PROM, lp->mmio + CMD2); 1365 return; 1366 } 1367 else 1368 writel( PROM, lp->mmio + CMD2); 1369 if (dev->flags & IFF_ALLMULTI || 1370 netdev_mc_count(dev) > MAX_FILTER_SIZE) { 1371 /* get all multicast packet */ 1372 mc_filter[1] = mc_filter[0] = 0xffffffff; 1373 lp->options |= OPTION_MULTICAST_ENABLE; 1374 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1375 return; 1376 } 1377 if (netdev_mc_empty(dev)) { 1378 /* get only own packets */ 1379 mc_filter[1] = mc_filter[0] = 0; 1380 lp->options &= ~OPTION_MULTICAST_ENABLE; 1381 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1382 /* disable promiscuous mode */ 1383 writel(PROM, lp->mmio + CMD2); 1384 return; 1385 } 1386 /* load all the multicast addresses in the logic filter */ 1387 lp->options |= OPTION_MULTICAST_ENABLE; 1388 mc_filter[1] = mc_filter[0] = 0; 1389 netdev_for_each_mc_addr(ha, dev) { 1390 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f; 1391 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); 1392 } 1393 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1394 1395 /* To eliminate PCI posting bug */ 1396 readl(lp->mmio + CMD2); 1397 1398} 1399 1400static void amd8111e_get_drvinfo(struct net_device *dev, 1401 struct ethtool_drvinfo *info) 1402{ 1403 struct amd8111e_priv *lp = netdev_priv(dev); 1404 struct pci_dev *pci_dev = lp->pci_dev; 1405 strlcpy(info->driver, MODULE_NAME, sizeof(info->driver)); 1406 strlcpy(info->version, MODULE_VERS, sizeof(info->version)); 1407 snprintf(info->fw_version, sizeof(info->fw_version), 1408 "%u", chip_version); 1409 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); 1410} 1411 1412static int amd8111e_get_regs_len(struct net_device *dev) 1413{ 1414 return AMD8111E_REG_DUMP_LEN; 1415} 1416 1417static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) 1418{ 1419 struct amd8111e_priv *lp = netdev_priv(dev); 1420 regs->version = 0; 1421 amd8111e_read_regs(lp, buf); 1422} 1423 1424static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1425{ 1426 struct amd8111e_priv *lp = netdev_priv(dev); 1427 spin_lock_irq(&lp->lock); 1428 mii_ethtool_gset(&lp->mii_if, ecmd); 1429 spin_unlock_irq(&lp->lock); 1430 return 0; 1431} 1432 1433static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1434{ 1435 struct amd8111e_priv *lp = netdev_priv(dev); 1436 int res; 1437 spin_lock_irq(&lp->lock); 1438 res = mii_ethtool_sset(&lp->mii_if, ecmd); 1439 spin_unlock_irq(&lp->lock); 1440 return res; 1441} 1442 1443static int amd8111e_nway_reset(struct net_device *dev) 1444{ 1445 struct amd8111e_priv *lp = netdev_priv(dev); 1446 return mii_nway_restart(&lp->mii_if); 1447} 1448 1449static u32 amd8111e_get_link(struct net_device *dev) 1450{ 1451 struct amd8111e_priv *lp = netdev_priv(dev); 1452 return mii_link_ok(&lp->mii_if); 1453} 1454 1455static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1456{ 1457 struct amd8111e_priv *lp = netdev_priv(dev); 1458 wol_info->supported = WAKE_MAGIC|WAKE_PHY; 1459 if (lp->options & OPTION_WOL_ENABLE) 1460 wol_info->wolopts = WAKE_MAGIC; 1461} 1462 1463static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1464{ 1465 struct amd8111e_priv *lp = netdev_priv(dev); 1466 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY)) 1467 return -EINVAL; 1468 spin_lock_irq(&lp->lock); 1469 if (wol_info->wolopts & WAKE_MAGIC) 1470 lp->options |= 1471 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE); 1472 else if(wol_info->wolopts & WAKE_PHY) 1473 lp->options |= 1474 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE); 1475 else 1476 lp->options &= ~OPTION_WOL_ENABLE; 1477 spin_unlock_irq(&lp->lock); 1478 return 0; 1479} 1480 1481static const struct ethtool_ops ops = { 1482 .get_drvinfo = amd8111e_get_drvinfo, 1483 .get_regs_len = amd8111e_get_regs_len, 1484 .get_regs = amd8111e_get_regs, 1485 .get_settings = amd8111e_get_settings, 1486 .set_settings = amd8111e_set_settings, 1487 .nway_reset = amd8111e_nway_reset, 1488 .get_link = amd8111e_get_link, 1489 .get_wol = amd8111e_get_wol, 1490 .set_wol = amd8111e_set_wol, 1491}; 1492 1493/* This function handles all the ethtool ioctls. It gives driver info, 1494 * gets/sets driver speed, gets memory mapped register values, forces 1495 * auto negotiation, sets/gets WOL options for ethtool application. 1496 */ 1497static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd) 1498{ 1499 struct mii_ioctl_data *data = if_mii(ifr); 1500 struct amd8111e_priv *lp = netdev_priv(dev); 1501 int err; 1502 u32 mii_regval; 1503 1504 switch(cmd) { 1505 case SIOCGMIIPHY: 1506 data->phy_id = lp->ext_phy_addr; 1507 1508 /* fallthru */ 1509 case SIOCGMIIREG: 1510 1511 spin_lock_irq(&lp->lock); 1512 err = amd8111e_read_phy(lp, data->phy_id, 1513 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval); 1514 spin_unlock_irq(&lp->lock); 1515 1516 data->val_out = mii_regval; 1517 return err; 1518 1519 case SIOCSMIIREG: 1520 1521 spin_lock_irq(&lp->lock); 1522 err = amd8111e_write_phy(lp, data->phy_id, 1523 data->reg_num & PHY_REG_ADDR_MASK, data->val_in); 1524 spin_unlock_irq(&lp->lock); 1525 1526 return err; 1527 1528 default: 1529 /* do nothing */ 1530 break; 1531 } 1532 return -EOPNOTSUPP; 1533} 1534static int amd8111e_set_mac_address(struct net_device *dev, void *p) 1535{ 1536 struct amd8111e_priv *lp = netdev_priv(dev); 1537 int i; 1538 struct sockaddr *addr = p; 1539 1540 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 1541 spin_lock_irq(&lp->lock); 1542 /* Setting the MAC address to the device */ 1543 for (i = 0; i < ETH_ALEN; i++) 1544 writeb( dev->dev_addr[i], lp->mmio + PADR + i ); 1545 1546 spin_unlock_irq(&lp->lock); 1547 1548 return 0; 1549} 1550 1551/* This function changes the mtu of the device. It restarts the device to 1552 * initialize the descriptor with new receive buffers. 1553 */ 1554static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) 1555{ 1556 struct amd8111e_priv *lp = netdev_priv(dev); 1557 int err; 1558 1559 if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU)) 1560 return -EINVAL; 1561 1562 if (!netif_running(dev)) { 1563 /* new_mtu will be used 1564 * when device starts netxt time 1565 */ 1566 dev->mtu = new_mtu; 1567 return 0; 1568 } 1569 1570 spin_lock_irq(&lp->lock); 1571 1572 /* stop the chip */ 1573 writel(RUN, lp->mmio + CMD0); 1574 1575 dev->mtu = new_mtu; 1576 1577 err = amd8111e_restart(dev); 1578 spin_unlock_irq(&lp->lock); 1579 if(!err) 1580 netif_start_queue(dev); 1581 return err; 1582} 1583 1584static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp) 1585{ 1586 writel( VAL1|MPPLBA, lp->mmio + CMD3); 1587 writel( VAL0|MPEN_SW, lp->mmio + CMD7); 1588 1589 /* To eliminate PCI posting bug */ 1590 readl(lp->mmio + CMD7); 1591 return 0; 1592} 1593 1594static int amd8111e_enable_link_change(struct amd8111e_priv *lp) 1595{ 1596 1597 /* Adapter is already stoped/suspended/interrupt-disabled */ 1598 writel(VAL0|LCMODE_SW,lp->mmio + CMD7); 1599 1600 /* To eliminate PCI posting bug */ 1601 readl(lp->mmio + CMD7); 1602 return 0; 1603} 1604 1605/* This function is called when a packet transmission fails to complete 1606 * within a reasonable period, on the assumption that an interrupt have 1607 * failed or the interface is locked up. This function will reinitialize 1608 * the hardware. 1609 */ 1610static void amd8111e_tx_timeout(struct net_device *dev) 1611{ 1612 struct amd8111e_priv *lp = netdev_priv(dev); 1613 int err; 1614 1615 netdev_err(dev, "transmit timed out, resetting\n"); 1616 1617 spin_lock_irq(&lp->lock); 1618 err = amd8111e_restart(dev); 1619 spin_unlock_irq(&lp->lock); 1620 if(!err) 1621 netif_wake_queue(dev); 1622} 1623static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state) 1624{ 1625 struct net_device *dev = pci_get_drvdata(pci_dev); 1626 struct amd8111e_priv *lp = netdev_priv(dev); 1627 1628 if (!netif_running(dev)) 1629 return 0; 1630 1631 /* disable the interrupt */ 1632 spin_lock_irq(&lp->lock); 1633 amd8111e_disable_interrupt(lp); 1634 spin_unlock_irq(&lp->lock); 1635 1636 netif_device_detach(dev); 1637 1638 /* stop chip */ 1639 spin_lock_irq(&lp->lock); 1640 if(lp->options & OPTION_DYN_IPG_ENABLE) 1641 del_timer_sync(&lp->ipg_data.ipg_timer); 1642 amd8111e_stop_chip(lp); 1643 spin_unlock_irq(&lp->lock); 1644 1645 if(lp->options & OPTION_WOL_ENABLE){ 1646 /* enable wol */ 1647 if(lp->options & OPTION_WAKE_MAGIC_ENABLE) 1648 amd8111e_enable_magicpkt(lp); 1649 if(lp->options & OPTION_WAKE_PHY_ENABLE) 1650 amd8111e_enable_link_change(lp); 1651 1652 pci_enable_wake(pci_dev, PCI_D3hot, 1); 1653 pci_enable_wake(pci_dev, PCI_D3cold, 1); 1654 1655 } 1656 else{ 1657 pci_enable_wake(pci_dev, PCI_D3hot, 0); 1658 pci_enable_wake(pci_dev, PCI_D3cold, 0); 1659 } 1660 1661 pci_save_state(pci_dev); 1662 pci_set_power_state(pci_dev, PCI_D3hot); 1663 1664 return 0; 1665} 1666static int amd8111e_resume(struct pci_dev *pci_dev) 1667{ 1668 struct net_device *dev = pci_get_drvdata(pci_dev); 1669 struct amd8111e_priv *lp = netdev_priv(dev); 1670 1671 if (!netif_running(dev)) 1672 return 0; 1673 1674 pci_set_power_state(pci_dev, PCI_D0); 1675 pci_restore_state(pci_dev); 1676 1677 pci_enable_wake(pci_dev, PCI_D3hot, 0); 1678 pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */ 1679 1680 netif_device_attach(dev); 1681 1682 spin_lock_irq(&lp->lock); 1683 amd8111e_restart(dev); 1684 /* Restart ipg timer */ 1685 if(lp->options & OPTION_DYN_IPG_ENABLE) 1686 mod_timer(&lp->ipg_data.ipg_timer, 1687 jiffies + IPG_CONVERGE_JIFFIES); 1688 spin_unlock_irq(&lp->lock); 1689 1690 return 0; 1691} 1692 1693static void amd8111e_config_ipg(struct net_device *dev) 1694{ 1695 struct amd8111e_priv *lp = netdev_priv(dev); 1696 struct ipg_info *ipg_data = &lp->ipg_data; 1697 void __iomem *mmio = lp->mmio; 1698 unsigned int prev_col_cnt = ipg_data->col_cnt; 1699 unsigned int total_col_cnt; 1700 unsigned int tmp_ipg; 1701 1702 if(lp->link_config.duplex == DUPLEX_FULL){ 1703 ipg_data->ipg = DEFAULT_IPG; 1704 return; 1705 } 1706 1707 if(ipg_data->ipg_state == SSTATE){ 1708 1709 if(ipg_data->timer_tick == IPG_STABLE_TIME){ 1710 1711 ipg_data->timer_tick = 0; 1712 ipg_data->ipg = MIN_IPG - IPG_STEP; 1713 ipg_data->current_ipg = MIN_IPG; 1714 ipg_data->diff_col_cnt = 0xFFFFFFFF; 1715 ipg_data->ipg_state = CSTATE; 1716 } 1717 else 1718 ipg_data->timer_tick++; 1719 } 1720 1721 if(ipg_data->ipg_state == CSTATE){ 1722 1723 /* Get the current collision count */ 1724 1725 total_col_cnt = ipg_data->col_cnt = 1726 amd8111e_read_mib(mmio, xmt_collisions); 1727 1728 if ((total_col_cnt - prev_col_cnt) < 1729 (ipg_data->diff_col_cnt)){ 1730 1731 ipg_data->diff_col_cnt = 1732 total_col_cnt - prev_col_cnt ; 1733 1734 ipg_data->ipg = ipg_data->current_ipg; 1735 } 1736 1737 ipg_data->current_ipg += IPG_STEP; 1738 1739 if (ipg_data->current_ipg <= MAX_IPG) 1740 tmp_ipg = ipg_data->current_ipg; 1741 else{ 1742 tmp_ipg = ipg_data->ipg; 1743 ipg_data->ipg_state = SSTATE; 1744 } 1745 writew((u32)tmp_ipg, mmio + IPG); 1746 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1); 1747 } 1748 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES); 1749 return; 1750 1751} 1752 1753static void amd8111e_probe_ext_phy(struct net_device *dev) 1754{ 1755 struct amd8111e_priv *lp = netdev_priv(dev); 1756 int i; 1757 1758 for (i = 0x1e; i >= 0; i--) { 1759 u32 id1, id2; 1760 1761 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1)) 1762 continue; 1763 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2)) 1764 continue; 1765 lp->ext_phy_id = (id1 << 16) | id2; 1766 lp->ext_phy_addr = i; 1767 return; 1768 } 1769 lp->ext_phy_id = 0; 1770 lp->ext_phy_addr = 1; 1771} 1772 1773static const struct net_device_ops amd8111e_netdev_ops = { 1774 .ndo_open = amd8111e_open, 1775 .ndo_stop = amd8111e_close, 1776 .ndo_start_xmit = amd8111e_start_xmit, 1777 .ndo_tx_timeout = amd8111e_tx_timeout, 1778 .ndo_get_stats = amd8111e_get_stats, 1779 .ndo_set_rx_mode = amd8111e_set_multicast_list, 1780 .ndo_validate_addr = eth_validate_addr, 1781 .ndo_set_mac_address = amd8111e_set_mac_address, 1782 .ndo_do_ioctl = amd8111e_ioctl, 1783 .ndo_change_mtu = amd8111e_change_mtu, 1784#ifdef CONFIG_NET_POLL_CONTROLLER 1785 .ndo_poll_controller = amd8111e_poll, 1786#endif 1787}; 1788 1789static int amd8111e_probe_one(struct pci_dev *pdev, 1790 const struct pci_device_id *ent) 1791{ 1792 int err, i; 1793 unsigned long reg_addr,reg_len; 1794 struct amd8111e_priv *lp; 1795 struct net_device *dev; 1796 1797 err = pci_enable_device(pdev); 1798 if(err){ 1799 dev_err(&pdev->dev, "Cannot enable new PCI device\n"); 1800 return err; 1801 } 1802 1803 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){ 1804 dev_err(&pdev->dev, "Cannot find PCI base address\n"); 1805 err = -ENODEV; 1806 goto err_disable_pdev; 1807 } 1808 1809 err = pci_request_regions(pdev, MODULE_NAME); 1810 if(err){ 1811 dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); 1812 goto err_disable_pdev; 1813 } 1814 1815 pci_set_master(pdev); 1816 1817 /* Find power-management capability. */ 1818 if (!pdev->pm_cap) { 1819 dev_err(&pdev->dev, "No Power Management capability\n"); 1820 err = -ENODEV; 1821 goto err_free_reg; 1822 } 1823 1824 /* Initialize DMA */ 1825 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) { 1826 dev_err(&pdev->dev, "DMA not supported\n"); 1827 err = -ENODEV; 1828 goto err_free_reg; 1829 } 1830 1831 reg_addr = pci_resource_start(pdev, 0); 1832 reg_len = pci_resource_len(pdev, 0); 1833 1834 dev = alloc_etherdev(sizeof(struct amd8111e_priv)); 1835 if (!dev) { 1836 err = -ENOMEM; 1837 goto err_free_reg; 1838 } 1839 1840 SET_NETDEV_DEV(dev, &pdev->dev); 1841 1842#if AMD8111E_VLAN_TAG_USED 1843 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ; 1844#endif 1845 1846 lp = netdev_priv(dev); 1847 lp->pci_dev = pdev; 1848 lp->amd8111e_net_dev = dev; 1849 lp->pm_cap = pdev->pm_cap; 1850 1851 spin_lock_init(&lp->lock); 1852 1853 lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len); 1854 if (!lp->mmio) { 1855 dev_err(&pdev->dev, "Cannot map device registers\n"); 1856 err = -ENOMEM; 1857 goto err_free_dev; 1858 } 1859 1860 /* Initializing MAC address */ 1861 for (i = 0; i < ETH_ALEN; i++) 1862 dev->dev_addr[i] = readb(lp->mmio + PADR + i); 1863 1864 /* Setting user defined parametrs */ 1865 lp->ext_phy_option = speed_duplex[card_idx]; 1866 if(coalesce[card_idx]) 1867 lp->options |= OPTION_INTR_COAL_ENABLE; 1868 if(dynamic_ipg[card_idx++]) 1869 lp->options |= OPTION_DYN_IPG_ENABLE; 1870 1871 1872 /* Initialize driver entry points */ 1873 dev->netdev_ops = &amd8111e_netdev_ops; 1874 dev->ethtool_ops = &ops; 1875 dev->irq =pdev->irq; 1876 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; 1877 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32); 1878 1879#if AMD8111E_VLAN_TAG_USED 1880 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; 1881#endif 1882 /* Probe the external PHY */ 1883 amd8111e_probe_ext_phy(dev); 1884 1885 /* setting mii default values */ 1886 lp->mii_if.dev = dev; 1887 lp->mii_if.mdio_read = amd8111e_mdio_read; 1888 lp->mii_if.mdio_write = amd8111e_mdio_write; 1889 lp->mii_if.phy_id = lp->ext_phy_addr; 1890 1891 /* Set receive buffer length and set jumbo option*/ 1892 amd8111e_set_rx_buff_len(dev); 1893 1894 1895 err = register_netdev(dev); 1896 if (err) { 1897 dev_err(&pdev->dev, "Cannot register net device\n"); 1898 goto err_free_dev; 1899 } 1900 1901 pci_set_drvdata(pdev, dev); 1902 1903 /* Initialize software ipg timer */ 1904 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1905 init_timer(&lp->ipg_data.ipg_timer); 1906 lp->ipg_data.ipg_timer.data = (unsigned long) dev; 1907 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg; 1908 lp->ipg_data.ipg_timer.expires = jiffies + 1909 IPG_CONVERGE_JIFFIES; 1910 lp->ipg_data.ipg = DEFAULT_IPG; 1911 lp->ipg_data.ipg_state = CSTATE; 1912 } 1913 1914 /* display driver and device information */ 1915 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28; 1916 dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS); 1917 dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", 1918 chip_version, dev->dev_addr); 1919 if (lp->ext_phy_id) 1920 dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n", 1921 lp->ext_phy_id, lp->ext_phy_addr); 1922 else 1923 dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n"); 1924 1925 return 0; 1926 1927err_free_dev: 1928 free_netdev(dev); 1929 1930err_free_reg: 1931 pci_release_regions(pdev); 1932 1933err_disable_pdev: 1934 pci_disable_device(pdev); 1935 return err; 1936 1937} 1938 1939static void amd8111e_remove_one(struct pci_dev *pdev) 1940{ 1941 struct net_device *dev = pci_get_drvdata(pdev); 1942 1943 if (dev) { 1944 unregister_netdev(dev); 1945 free_netdev(dev); 1946 pci_release_regions(pdev); 1947 pci_disable_device(pdev); 1948 } 1949} 1950 1951static const struct pci_device_id amd8111e_pci_tbl[] = { 1952 { 1953 .vendor = PCI_VENDOR_ID_AMD, 1954 .device = PCI_DEVICE_ID_AMD8111E_7462, 1955 }, 1956 { 1957 .vendor = 0, 1958 } 1959}; 1960MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl); 1961 1962static struct pci_driver amd8111e_driver = { 1963 .name = MODULE_NAME, 1964 .id_table = amd8111e_pci_tbl, 1965 .probe = amd8111e_probe_one, 1966 .remove = amd8111e_remove_one, 1967 .suspend = amd8111e_suspend, 1968 .resume = amd8111e_resume 1969}; 1970 1971module_pci_driver(amd8111e_driver); 1972