Searched refs:bit0 (Results 1 - 114 of 114) sorted by relevance

/linux-4.4.14/arch/powerpc/include/uapi/asm/
H A Dtm.h5 * convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if
/linux-4.4.14/arch/mips/math-emu/
H A Ddp_2008class.c26 * bit0 = SNAN ieee754dp_2008class()
H A Dsp_2008class.c26 * bit0 = SNAN ieee754sp_2008class()
/linux-4.4.14/arch/mips/kernel/
H A Dirq-gt641xx.c102 * bit0 : logical or of all the interrupt bits. gt641xx_irq_dispatch()
124 * bit0 : logical or of all the interrupt bits. gt641xx_irq_init()
/linux-4.4.14/include/video/
H A Dpxa168fb.h40 * bit0 is for rb swap.
/linux-4.4.14/sound/pci/au88x0/
H A Dau88x0_wt.h46 gmode, /* 7 RO Looks like only bit0 is used. */
/linux-4.4.14/drivers/ide/
H A Dtrm290.c47 * bit0 1=test_mode, 0=normal(default)
52 * bit0 channel0 interrupt status 0=none, 1=asserted
60 * bit0 channel0 interrupt mask: 1=masked, 0=unmasked(default)
86 * bit0 enable_io_ports: 1=enable(default), 0=disable
H A Dalim15x3.c305 * CD_ROM DMA on (m5229, 0x53, bit0) init_chipset_ali15x3()
390 * 0x4a bit0 is 0 => primary channel has 80-pin ali_cable_detect()
431 /* bit0, bit1 */ init_hwif_ali15x3()
H A Dht6560b.c35 * bit0 (0x01): "1" selects secondary interface
40 * bit0 (0x01): "1" selects secondary interface
/linux-4.4.14/drivers/media/usb/dvb-usb/
H A Ddib0700.h33 // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
/linux-4.4.14/drivers/input/touchscreen/
H A Dwdt87xx_i2c.c611 u32 bit0; misr() local
616 bit0 = a ^ (b & 1); misr()
617 bit0 ^= a >> 1; misr()
618 bit0 ^= a >> 2; misr()
619 bit0 ^= a >> 4; misr()
620 bit0 ^= a >> 5; misr()
621 bit0 ^= a >> 7; misr()
622 bit0 ^= a >> 11; misr()
623 bit0 ^= a >> 15; misr()
625 y = (y & ~1) | (bit0 & 1); misr()
/linux-4.4.14/drivers/acpi/pmic/
H A Dintel_pmic_crc.c129 * and 2bits in reg-1: bit0,1 intel_crc_pmic_get_raw_temp()
/linux-4.4.14/drivers/net/wireless/ath/ath9k/
H A Dar9003_eeprom.h188 * bit0 - enable tx temp comp
195 /* misc flags: bit0 - turn down drivestrength */
H A Dar9003_eeprom.c66 * bit0 - enable tx temp comp - disabled
73 .miscConfiguration = 0, /* bit0 - turn down drivestrength */
644 * bit0 - enable tx temp comp - disabled
651 .miscConfiguration = 0, /* bit0 - turn down drivestrength */
1223 * bit0 - enable tx temp comp - disabled
1230 .miscConfiguration = 0, /* bit0 - turn down drivestrength */
1802 * bit0 - enable tx temp comp - disabled
1809 .miscConfiguration = 0, /* bit0 - turn down drivestrength */
2380 * bit0 - enable tx temp comp - disabled
2387 .miscConfiguration = 0, /* bit0 - turn down drivestrength */
/linux-4.4.14/drivers/net/wireless/libertas/
H A Ddev.h122 /* bit0 1/0=data_sent/data_tx_done,
/linux-4.4.14/drivers/net/ethernet/atheros/alx/
H A Dreg.h124 /* bit0: MAC & DMA reset */
144 /* bit0: out of dsp RST state */
734 /* bit0: 25M switch to intnl OSC */
848 /* bit0: 1:bypass 10BT rx fifo, 0:original 10BT rx */
/linux-4.4.14/drivers/net/ethernet/amd/
H A D7990.h133 #define LE_CSR1 0x0001 /* IADR[15:0] (bit0==0 ie word aligned) */
181 #define LE_MO_PSEL0 0x0080 /* port selection bit0 */
/linux-4.4.14/drivers/scsi/
H A Ddc395x.h378 /* and bit2,bit1,bit0 is defined as follows : */
390 /* and bit2,bit1,bit0 is defined as follows : */
402 /* and bit2,bit1,bit0 is defined as follows : */
/linux-4.4.14/drivers/staging/rtl8723au/core/
H A Drtw_efuse.c247 /* Write E-fuse Register address bit0~7 */ EFUSE_Read1Byte23a()
291 /* Write E-fuse Register address bit0~7 */ EFUSE_Write1Byte()
/linux-4.4.14/drivers/gpu/drm/nouveau/dispnv04/
H A Dhw.h146 * 0x03 bit0 set for dual link (LVDS, possibly elsewhere too)
297 * bit0: same as bit 0 of 0x60?804 nv_lock_vga_crtc_shadow()
H A Dcrtc.c537 * bit0: crtc0?, head A nv_crtc_mode_set_regs()
/linux-4.4.14/drivers/staging/rtl8188eu/include/
H A Dsta_info.h328 * bit0~bit15 */
/linux-4.4.14/drivers/staging/rtl8723au/include/
H A Dsta_info.h338 * aid=0~15 mapping bit0~bit15 */
H A Drtl8723a_spec.h2130 /* bit0: RSVD */
/linux-4.4.14/drivers/media/rc/
H A Dfintek-cir.h187 #define CIR_CR_DEV_EN 0x30 /* bit0 = 1 enables CIR */
/linux-4.4.14/drivers/misc/lis3lv02d/
H A Dlis3lv02d.h307 unsigned long misc_opened; /* bit0: whether the device is open */
/linux-4.4.14/drivers/media/dvb-frontends/
H A Dec100.c201 /* bit0 clear - have ~valid signal */ ec100_read_status()
H A Dm88rs2000.c423 data |= 0x03; /* bit0 V/H, bit1 off/on */ m88rs2000_set_voltage()
H A Dds3000.c416 data |= 0x03; /* bit0 V/H, bit1 off/on */ ds3000_set_voltage()
/linux-4.4.14/drivers/net/ethernet/toshiba/
H A Dps3_gelic_wireless.h275 u16 ch_info; /* available channels. bit0 = ch1 */
/linux-4.4.14/drivers/char/
H A Dpc8736x_gpio.c46 #define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
/linux-4.4.14/include/scsi/fc/
H A Dfc_fip.h248 __u8 fd_flags; /* bit0 is fka disable flag */
/linux-4.4.14/include/scsi/
H A Dscsi.h72 * FIXME: bit0 is listed as reserved in SCSI-2, but is scsi_status_is_good()
/linux-4.4.14/drivers/staging/rtl8188eu/hal/
H A Drtl8188e_hal_init.c549 pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7); /* bit0~2 */ Hal_ReadTxPowerInfo88E()
551 pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */ Hal_ReadTxPowerInfo88E()
/linux-4.4.14/drivers/media/usb/gspca/
H A Dspca506.c135 /* NTSC bit0 -> 1(525 l) PAL SECAM bit0 -> 0 (625 l) */ spca506_SetNormeInput()
H A Dsonixb.c302 0x07 offset sign bit (bit0 1 > negative offset)
368 0x0b offset sign bit (bit0 1 > negative offset)
H A Dpac7302.c848 * reg->reg: bit0..15: reserved for register index (wIndex is 16bit sd_dbg_s_register()
/linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/rtl8723be/
H A Dfw.c272 /* parm[0]: bit0=0-->Disconnect, bit0=1-->Connect rtl8723be_set_fw_media_status_rpt_cmd()
H A Dphy.c1594 /* bit0 = 1 => Tx OK, bit1 = 1 => Rx OK */ _rtl8723be_phy_path_a_rx_iqk()
1814 /* bit0 = 1 => Tx OK, bit1 = 1 => Rx OK */ _rtl8723be_phy_path_b_rx_iqk()
H A Dhw.c2013 hwinfo[EEPROM_RF_BOARD_OPTION_88E] & 0x07;/*bit0~2*/ _rtl8723be_read_txpower_info_from_hwpg()
/linux-4.4.14/drivers/net/ethernet/chelsio/cxgb/
H A Dvsc7326_reg.h37 #define REG_MPLS_BIT0 CRA(0x7,0x1,0x08) /* MPLS bit0 position */
42 #define REG_PRE_BIT0POS CRA(0x7,0x1,0x10) /* Preamble bit0 position */
/linux-4.4.14/drivers/ata/
H A Dsata_via.c215 /* read the DET field, bit0 and 1 of the config byte */ vt8251_scr_read()
237 /* read the DET field, bit0 and bit1 */ vt8251_scr_read()
H A Dahci_xgene.c271 * bit0: Reserved xgene_ahci_read_id()
/linux-4.4.14/drivers/staging/rtl8192u/ieee80211/
H A Drtl819x_Qos.h461 AC_UAPSD b4ac_Uapsd; //VoUapsd(bit0), ViUapsd(bit1), BkUapsd(bit2), BeUapsd(bit3),
/linux-4.4.14/drivers/media/usb/cx231xx/
H A Dcx231xx-conf-reg.h60 #define I2C_DEMOD_EN 0x01 /* bit0 */
H A Dcx231xx-avcore.c2761 /* toggle bit0 of GP_IO */ cx231xx_set_gpio_value()
/linux-4.4.14/drivers/net/wireless/libertas_tf/
H A Dlibertas_tf.h184 bit0 1/0=data_sent/data_tx_done,
/linux-4.4.14/drivers/net/ethernet/hisilicon/hns/
H A Dhns_dsaf_main.h157 /* bit0-bit5 means Port0-Port5(1bit is vld)**/
/linux-4.4.14/arch/arm/probes/kprobes/
H A Dopt-arm.c80 " strne r2, [sp, #60] @ set bit0 of PC for thumb\n"
/linux-4.4.14/drivers/w1/
H A Dw1.h131 * @return bit0=Id bit1=comp_id bit2=dir_taken
/linux-4.4.14/drivers/input/tablet/
H A Daiptek.c93 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
101 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
113 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
125 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
135 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
/linux-4.4.14/drivers/acpi/acpica/
H A Dhwxface.c285 * returned is normalized to bit0 (is shifted all the way right) ACPI_EXPORT_SYMBOL()
/linux-4.4.14/arch/m68k/include/asm/
H A Dmac_via.h145 * bit1 bit0 size of ICs in bank A
/linux-4.4.14/arch/m32r/kernel/
H A Dentry.S462 * | bit3 | bit2 | bit1 | bit0 |
/linux-4.4.14/drivers/gpu/drm/radeon/
H A Datombios.h1035 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1037 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1100 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1102 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1196 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1198 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
2018 UCHAR ucMisc; // bit0=0: Enable single link
2042 UCHAR ucTruncate; // bit0=0: Disable truncate
2046 UCHAR ucSpatial; // bit0=0: Disable spatial dithering
2050 UCHAR ucTemporal; // bit0=0: Disable temporal dithering
4479 UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv
4944 ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5170 ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5375 ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
6469 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
6496 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
6529 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
6608 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
6650 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
6681 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
7599 UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
H A Drv770d.h891 * bit0 = 32 kHz
H A Dsid.h728 * bit0 = 32 kHz
H A Devergreend.h755 * bit0 = 32 kHz
H A Dr600d.h1012 * bit0 = 32 kHz
/linux-4.4.14/drivers/gpu/drm/amd/include/
H A Datombios.h1049 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1051 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1114 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1116 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1210 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1212 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
2073 UCHAR ucMisc; // bit0=0: Enable single link
2096 UCHAR ucTruncate; // bit0=0: Disable truncate
2100 UCHAR ucSpatial; // bit0=0: Disable spatial dithering
2104 UCHAR ucTemporal; // bit0=0: Disable temporal dithering
4605 UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv
5203 ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5434 ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5640 ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
6934 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
6961 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
6997 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
7077 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
7119 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
7151 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
8168 UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
/linux-4.4.14/drivers/scsi/pm8001/
H A Dpm8001_hwi.h512 * data retries: bit15-bit0.
821 #define SPC_MSGU_CFG_TABLE_UPDATE 0x01/* Inbound doorbell bit0 */
H A Dpm8001_hwi.c529 /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the mpi_init_check()
H A Dpm80xx_hwi.c653 /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the mpi_init_check()
/linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/
H A Dfw.c532 /* parm[0]: bit0=0-->Disconnect, bit0=1-->Connect rtl92ee_set_fw_media_status_rpt_cmd()
/linux-4.4.14/drivers/edac/
H A Dcpc925_edac.c43 * CPC925 registers are of 32 bits with bit0 defined at the
152 #define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/
/linux-4.4.14/drivers/tty/serial/
H A Dsprd_serial.c452 /* clock divider bit0~bit15 */ sprd_set_termios()
/linux-4.4.14/drivers/scsi/mvsas/
H A Dmv_94xx.c529 /* set bit0 to 0 to enable retry for no_dest reject case */ mvs_94xx_init()
/linux-4.4.14/drivers/media/pci/cx18/
H A Dcx23418.h213 bit0: 1:mute, 0: unmute
/linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/rtl8192de/
H A Dphy.c1426 /* bit0 = 1 => Tx OK, bit1 = 1 => Rx OK */ _rtl92d_phy_patha_iqk()
1488 /* bit0 = 1 => Tx OK, bit1 = 1 => Rx OK */ _rtl92d_phy_patha_iqk_5g_normal()
1572 /* bit0 = 1 => Tx OK, bit1 = 1 => Rx OK */ _rtl92d_phy_pathb_iqk()
1612 /* bit0 = 1 => Tx OK, bit1 = 1 => Rx OK */ _rtl92d_phy_pathb_iqk_5g_normal()
H A Dhw.c1583 /* bit0~2 */ _rtl92de_read_txpower_info()
/linux-4.4.14/drivers/char/tpm/
H A Dtpm_i2c_nuvoton.c91 #define TPM_STS_ERR_VAL 0x07 /* bit2...bit0 reads always 0 */
/linux-4.4.14/include/uapi/linux/
H A Dhdreg.h443 unsigned char multsect_valid; /* when (bit0==1) multsect is ok */
/linux-4.4.14/arch/arm/mach-tegra/
H A Dsleep-tegra30.S468 lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1
/linux-4.4.14/include/linux/
H A Disdn.h193 /* bit0: chargeint is invalid */
/linux-4.4.14/drivers/mmc/host/
H A Dmtk-sd.c251 #define GPDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
267 #define BDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
/linux-4.4.14/kernel/locking/
H A Drtmutex.c28 * owner bit0
40 * we need to set the bit0 before looking at the lock, and the owner may be
/linux-4.4.14/drivers/media/usb/usbvision/
H A Dusbvision-core.c1528 buffer[2] = (unsigned char)(distortion & 0xFF); /* distortion threshold bit0-7 */ usbvision_adjust_compression()
1531 buffer[4] = (unsigned char)(distortion & 0xFF); /* maximum distortion bit0-7 */ usbvision_adjust_compression()
/linux-4.4.14/arch/xtensa/kernel/
H A Dentry.S156 /* Rotate ws so that the current windowbase is at bit0. */
296 /* Rotate ws so that the current windowbase is at bit0. */
/linux-4.4.14/block/
H A Dblk-mq.c2146 * ctx1->rq_list and set bit0 in pending bitmap as ctx1->index_hw is blk_mq_queue_reinit_notify()
2149 * And then while running hw queue, flush_busy_ctxs() finds bit0 is blk_mq_queue_reinit_notify()
/linux-4.4.14/arch/mips/include/asm/octeon/
H A Dcvmx-pip-defs.h141 uint64_t bit0:6; member in struct:cvmx_pip_alt_skip_cfgx::cvmx_pip_alt_skip_cfgx_s
155 uint64_t bit0:6;
/linux-4.4.14/drivers/staging/rts5208/
H A Drtsx_chip.h195 #define BIT_ILLEGAL0 0 /* bit0 is illegal */
/linux-4.4.14/drivers/net/can/c_can/
H A Dc_can.c984 netdev_dbg(dev, "bit0 error\n"); c_can_handle_bus_err()
/linux-4.4.14/drivers/net/can/m_can/
H A Dm_can.c509 netdev_dbg(dev, "bit0 error\n"); m_can_handle_lec_err()
/linux-4.4.14/drivers/hwmon/
H A Dapplesmc.c255 /* Read the data port until bit0 is cleared */ read_smc()
H A Dw83793.c175 /* bit field, fan1 is bit0, fan2 is bit1 ... */
/linux-4.4.14/drivers/acpi/
H A Dbus.c263 /* Need to ignore the bit0 in result code */ acpi_run_osc()
/linux-4.4.14/arch/sparc/kernel/
H A Dleon_pci_grpci2.c50 * bit0 = PCI INTA#
/linux-4.4.14/arch/m68k/kernel/
H A Dtraps.c750 err_code |= 2; /* bit1 - write, bit0 - protection */ access_errorcf()
/linux-4.4.14/sound/pci/cs46xx/
H A Ddsp_spos_scb_lib.c551 DMA_RQ_C2_SIGNAL_SOURCE_PINGPONG + /* set play interrupt (bit0) in HISR when source */ cs46xx_dsp_create_pcm_reader_scb()
/linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/
H A Dfw.c593 /* parm[0]: bit0=0-->Disconnect, bit0=1-->Connect rtl8821ae_set_fw_media_status_rpt_cmd()
H A Dhw.c2856 hwinfo[EEPROM_RF_BOARD_OPTION] & 0x07;/*bit0~2*/
2941 /*bit0~2*/ _rtl8821ae_read_txpower_info_from_hwpg()
/linux-4.4.14/drivers/gpu/drm/i915/
H A Dintel_ringbuffer.c2567 /* bit0-7 is the length on GEN6+ */ hsw_ring_dispatch_execbuffer()
2590 /* bit0-7 is the length on GEN6+ */ gen6_ring_dispatch_execbuffer()
/linux-4.4.14/drivers/video/fbdev/
H A Dw100fb.c1557 val &= ~(0x00000001); /* bit0=0 */ w100_suspend()
/linux-4.4.14/drivers/net/fddi/skfp/h/
H A Dsupern_2.h418 #define FM_RXFBB01 0x0600 /* rec. frame byte boundary bit0 & 1 */
/linux-4.4.14/drivers/net/ethernet/davicom/
H A Ddm9000.c1320 iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ dm9000_open()
/linux-4.4.14/drivers/mtd/devices/
H A Ddocg3.c623 * the BCH library, the function reverses the order of bits (ie. bit7 and bit0,
/linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/
H A Dhw.c1823 hwinfo[EEPROM_RF_BOARD_OPTION_88E] & 0x07;/*bit0~2*/ _rtl88ee_read_txpower_info_from_hwpg()
/linux-4.4.14/sound/pci/asihpi/
H A Dhpi.h707 /** bit0: 1 when PLL is not locked */
/linux-4.4.14/drivers/staging/rtl8192u/
H A Dr8192U_core.c2600 /* Antenna B gain offset to antenna A, bit0~3 */ rtl8192_read_eeprom_info()
2607 /* ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2 rtl8192_read_eeprom_info()
/linux-4.4.14/drivers/usb/dwc3/
H A Dgadget.c193 /* bit0 indicates direction; 1 means IN ep */ dwc3_gadget_resize_tx_fifos()
/linux-4.4.14/drivers/usb/gadget/udc/
H A Damd5536udc.c354 /* CNAK pending field: bit0 = ep0in, bit16 = ep0out */
/linux-4.4.14/drivers/net/wireless/rt2x00/
H A Drt2800.h2081 * - bit0: detect SIG on primary channel only (on 40MHz bandwidth)
/linux-4.4.14/drivers/net/ethernet/broadcom/bnx2x/
H A Dbnx2x_link.c465 * bit4 bit3 bit2 bit1 bit0 bnx2x_ets_e2e3a0_disabled()
616 * bit4 bit3 bit2 bit1 bit0 bnx2x_ets_e3b0_nig_disabled()
1272 * bit4 bit3 bit2 bit1 bit0 bnx2x_ets_bw_limit_common()
1327 * bit4 bit3 bit2 bit1 bit0 bnx2x_ets_strict()
H A Dbnx2x_hsi.h253 /* The value of PM_TL_IGNORE_REQS (bit0) in PCI register
H A Dbnx2x_reg.h7112 /*WhenthelinkpartnerisinSGMIImode(bit0=1),then
/linux-4.4.14/arch/x86/kernel/cpu/
H A Dperf_event_intel.c1548 * 3) set bit0~bit3 of MSR_CORE_PERF_GLOBAL_CTRL; intel_pmu_nhm_workaround()
/linux-4.4.14/tools/power/x86/turbostat/
H A Dturbostat.c2725 * APERF/MPERF is advertised by CPUID.EAX=0x6: ECX.bit0 process_cpuid()
/linux-4.4.14/drivers/staging/xgifb/
H A Dvb_setmode.c2236 /* 000001b : clear bit 0, to set bit0 */
/linux-4.4.14/drivers/net/wireless/brcm80211/brcmfmac/
H A Dsdio.c799 /* only check for bit0, bit1(dev on status) may not brcmf_sdio_kso_control()
/linux-4.4.14/drivers/net/wireless/iwlwifi/dvm/
H A Dcommands.h3944 * bit0: reserved
/linux-4.4.14/drivers/net/ethernet/micrel/
H A Dksz884x.c1696 * @data_lo: The low part of data to be written (bit31 ~ bit0).
/linux-4.4.14/arch/ia64/kernel/
H A Dperfmon.c79 * bit0 : register implemented
/linux-4.4.14/arch/m68k/ifpsp060/src/
H A Dpfpsp.S4302 # operations and postincrement mode. (bit7 = FP7 ... bit0 = FP0)
H A Dfpsp.S18253 # operations and postincrement mode. (bit7 = FP7 ... bit0 = FP0)

Completed in 6397 milliseconds