1/****************************************************************************** 2 * 3 * Copyright(c) 2009-2012 Realtek Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of version 2 of the GNU General Public License as 7 * published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc., 16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA 17 * 18 * The full GNU General Public License is included in this distribution in the 19 * file called LICENSE. 20 * 21 * Contact Information: 22 * wlanfae <wlanfae@realtek.com> 23 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 24 * Hsinchu 300, Taiwan. 25 * 26 * Larry Finger <Larry.Finger@lwfinger.net> 27 * 28 *****************************************************************************/ 29 30#include "../wifi.h" 31#include "../efuse.h" 32#include "../base.h" 33#include "../regd.h" 34#include "../cam.h" 35#include "../ps.h" 36#include "../pci.h" 37#include "reg.h" 38#include "def.h" 39#include "phy.h" 40#include "dm.h" 41#include "fw.h" 42#include "led.h" 43#include "sw.h" 44#include "hw.h" 45 46u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct) 47{ 48 struct rtl_priv *rtlpriv = rtl_priv(hw); 49 u32 value; 50 51 rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC)); 52 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct); 53 udelay(10); 54 value = rtl_read_dword(rtlpriv, REG_DBI_RDATA); 55 return value; 56} 57 58void rtl92de_write_dword_dbi(struct ieee80211_hw *hw, 59 u16 offset, u32 value, u8 direct) 60{ 61 struct rtl_priv *rtlpriv = rtl_priv(hw); 62 63 rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000)); 64 rtl_write_dword(rtlpriv, REG_DBI_WDATA, value); 65 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct); 66} 67 68static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw, 69 u8 set_bits, u8 clear_bits) 70{ 71 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 72 struct rtl_priv *rtlpriv = rtl_priv(hw); 73 74 rtlpci->reg_bcn_ctrl_val |= set_bits; 75 rtlpci->reg_bcn_ctrl_val &= ~clear_bits; 76 rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val); 77} 78 79static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw) 80{ 81 struct rtl_priv *rtlpriv = rtl_priv(hw); 82 u8 tmp1byte; 83 84 tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); 85 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6))); 86 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff); 87 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64); 88 tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); 89 tmp1byte &= ~(BIT(0)); 90 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); 91} 92 93static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw) 94{ 95 struct rtl_priv *rtlpriv = rtl_priv(hw); 96 u8 tmp1byte; 97 98 tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); 99 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6)); 100 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); 101 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); 102 tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); 103 tmp1byte |= BIT(0); 104 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); 105} 106 107static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw) 108{ 109 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1)); 110} 111 112static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw) 113{ 114 _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0); 115} 116 117void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) 118{ 119 struct rtl_priv *rtlpriv = rtl_priv(hw); 120 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 121 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 122 123 switch (variable) { 124 case HW_VAR_RCR: 125 *((u32 *) (val)) = rtlpci->receive_config; 126 break; 127 case HW_VAR_RF_STATE: 128 *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; 129 break; 130 case HW_VAR_FWLPS_RF_ON:{ 131 enum rf_pwrstate rfState; 132 u32 val_rcr; 133 134 rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, 135 (u8 *) (&rfState)); 136 if (rfState == ERFOFF) { 137 *((bool *) (val)) = true; 138 } else { 139 val_rcr = rtl_read_dword(rtlpriv, REG_RCR); 140 val_rcr &= 0x00070000; 141 if (val_rcr) 142 *((bool *) (val)) = false; 143 else 144 *((bool *) (val)) = true; 145 } 146 break; 147 } 148 case HW_VAR_FW_PSMODE_STATUS: 149 *((bool *) (val)) = ppsc->fw_current_inpsmode; 150 break; 151 case HW_VAR_CORRECT_TSF:{ 152 u64 tsf; 153 u32 *ptsf_low = (u32 *)&tsf; 154 u32 *ptsf_high = ((u32 *)&tsf) + 1; 155 156 *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4)); 157 *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR); 158 *((u64 *) (val)) = tsf; 159 break; 160 } 161 case HW_VAR_INT_MIGRATION: 162 *((bool *)(val)) = rtlpriv->dm.interrupt_migration; 163 break; 164 case HW_VAR_INT_AC: 165 *((bool *)(val)) = rtlpriv->dm.disable_tx_int; 166 break; 167 default: 168 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 169 "switch case not processed\n"); 170 break; 171 } 172} 173 174void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) 175{ 176 struct rtl_priv *rtlpriv = rtl_priv(hw); 177 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 178 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 179 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 180 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 181 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 182 u8 idx; 183 184 switch (variable) { 185 case HW_VAR_ETHER_ADDR: 186 for (idx = 0; idx < ETH_ALEN; idx++) { 187 rtl_write_byte(rtlpriv, (REG_MACID + idx), 188 val[idx]); 189 } 190 break; 191 case HW_VAR_BASIC_RATE: { 192 u16 rate_cfg = ((u16 *) val)[0]; 193 u8 rate_index = 0; 194 195 rate_cfg = rate_cfg & 0x15f; 196 if (mac->vendor == PEER_CISCO && 197 ((rate_cfg & 0x150) == 0)) 198 rate_cfg |= 0x01; 199 rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff); 200 rtl_write_byte(rtlpriv, REG_RRSR + 1, 201 (rate_cfg >> 8) & 0xff); 202 while (rate_cfg > 0x1) { 203 rate_cfg = (rate_cfg >> 1); 204 rate_index++; 205 } 206 if (rtlhal->fw_version > 0xe) 207 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 208 rate_index); 209 break; 210 } 211 case HW_VAR_BSSID: 212 for (idx = 0; idx < ETH_ALEN; idx++) { 213 rtl_write_byte(rtlpriv, (REG_BSSID + idx), 214 val[idx]); 215 } 216 break; 217 case HW_VAR_SIFS: 218 rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]); 219 rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]); 220 rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]); 221 rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]); 222 if (!mac->ht_enable) 223 rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, 224 0x0e0e); 225 else 226 rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, 227 *((u16 *) val)); 228 break; 229 case HW_VAR_SLOT_TIME: { 230 u8 e_aci; 231 232 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, 233 "HW_VAR_SLOT_TIME %x\n", val[0]); 234 rtl_write_byte(rtlpriv, REG_SLOT, val[0]); 235 for (e_aci = 0; e_aci < AC_MAX; e_aci++) 236 rtlpriv->cfg->ops->set_hw_reg(hw, 237 HW_VAR_AC_PARAM, 238 (&e_aci)); 239 break; 240 } 241 case HW_VAR_ACK_PREAMBLE: { 242 u8 reg_tmp; 243 u8 short_preamble = (bool) (*val); 244 245 reg_tmp = (mac->cur_40_prime_sc) << 5; 246 if (short_preamble) 247 reg_tmp |= 0x80; 248 rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp); 249 break; 250 } 251 case HW_VAR_AMPDU_MIN_SPACE: { 252 u8 min_spacing_to_set; 253 u8 sec_min_space; 254 255 min_spacing_to_set = *val; 256 if (min_spacing_to_set <= 7) { 257 sec_min_space = 0; 258 if (min_spacing_to_set < sec_min_space) 259 min_spacing_to_set = sec_min_space; 260 mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) | 261 min_spacing_to_set); 262 *val = min_spacing_to_set; 263 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, 264 "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", 265 mac->min_space_cfg); 266 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 267 mac->min_space_cfg); 268 } 269 break; 270 } 271 case HW_VAR_SHORTGI_DENSITY: { 272 u8 density_to_set; 273 274 density_to_set = *val; 275 mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg; 276 mac->min_space_cfg |= (density_to_set << 3); 277 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, 278 "Set HW_VAR_SHORTGI_DENSITY: %#x\n", 279 mac->min_space_cfg); 280 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 281 mac->min_space_cfg); 282 break; 283 } 284 case HW_VAR_AMPDU_FACTOR: { 285 u8 factor_toset; 286 u32 regtoSet; 287 u8 *ptmp_byte = NULL; 288 u8 index; 289 290 if (rtlhal->macphymode == DUALMAC_DUALPHY) 291 regtoSet = 0xb9726641; 292 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) 293 regtoSet = 0x66626641; 294 else 295 regtoSet = 0xb972a841; 296 factor_toset = *val; 297 if (factor_toset <= 3) { 298 factor_toset = (1 << (factor_toset + 2)); 299 if (factor_toset > 0xf) 300 factor_toset = 0xf; 301 for (index = 0; index < 4; index++) { 302 ptmp_byte = (u8 *) (®toSet) + index; 303 if ((*ptmp_byte & 0xf0) > 304 (factor_toset << 4)) 305 *ptmp_byte = (*ptmp_byte & 0x0f) 306 | (factor_toset << 4); 307 if ((*ptmp_byte & 0x0f) > factor_toset) 308 *ptmp_byte = (*ptmp_byte & 0xf0) 309 | (factor_toset); 310 } 311 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoSet); 312 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, 313 "Set HW_VAR_AMPDU_FACTOR: %#x\n", 314 factor_toset); 315 } 316 break; 317 } 318 case HW_VAR_AC_PARAM: { 319 u8 e_aci = *val; 320 rtl92d_dm_init_edca_turbo(hw); 321 if (rtlpci->acm_method != EACMWAY2_SW) 322 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, 323 &e_aci); 324 break; 325 } 326 case HW_VAR_ACM_CTRL: { 327 u8 e_aci = *val; 328 union aci_aifsn *p_aci_aifsn = 329 (union aci_aifsn *)(&(mac->ac[0].aifs)); 330 u8 acm = p_aci_aifsn->f.acm; 331 u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL); 332 333 acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1); 334 if (acm) { 335 switch (e_aci) { 336 case AC0_BE: 337 acm_ctrl |= ACMHW_BEQEN; 338 break; 339 case AC2_VI: 340 acm_ctrl |= ACMHW_VIQEN; 341 break; 342 case AC3_VO: 343 acm_ctrl |= ACMHW_VOQEN; 344 break; 345 default: 346 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, 347 "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", 348 acm); 349 break; 350 } 351 } else { 352 switch (e_aci) { 353 case AC0_BE: 354 acm_ctrl &= (~ACMHW_BEQEN); 355 break; 356 case AC2_VI: 357 acm_ctrl &= (~ACMHW_VIQEN); 358 break; 359 case AC3_VO: 360 acm_ctrl &= (~ACMHW_VOQEN); 361 break; 362 default: 363 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 364 "switch case not processed\n"); 365 break; 366 } 367 } 368 RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE, 369 "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", 370 acm_ctrl); 371 rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl); 372 break; 373 } 374 case HW_VAR_RCR: 375 rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]); 376 rtlpci->receive_config = ((u32 *) (val))[0]; 377 break; 378 case HW_VAR_RETRY_LIMIT: { 379 u8 retry_limit = val[0]; 380 381 rtl_write_word(rtlpriv, REG_RL, 382 retry_limit << RETRY_LIMIT_SHORT_SHIFT | 383 retry_limit << RETRY_LIMIT_LONG_SHIFT); 384 break; 385 } 386 case HW_VAR_DUAL_TSF_RST: 387 rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1))); 388 break; 389 case HW_VAR_EFUSE_BYTES: 390 rtlefuse->efuse_usedbytes = *((u16 *) val); 391 break; 392 case HW_VAR_EFUSE_USAGE: 393 rtlefuse->efuse_usedpercentage = *val; 394 break; 395 case HW_VAR_IO_CMD: 396 rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val)); 397 break; 398 case HW_VAR_WPA_CONFIG: 399 rtl_write_byte(rtlpriv, REG_SECCFG, *val); 400 break; 401 case HW_VAR_SET_RPWM: 402 rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (val)); 403 break; 404 case HW_VAR_H2C_FW_PWRMODE: 405 break; 406 case HW_VAR_FW_PSMODE_STATUS: 407 ppsc->fw_current_inpsmode = *((bool *) val); 408 break; 409 case HW_VAR_H2C_FW_JOINBSSRPT: { 410 u8 mstatus = (*val); 411 u8 tmp_regcr, tmp_reg422; 412 bool recover = false; 413 414 if (mstatus == RT_MEDIA_CONNECT) { 415 rtlpriv->cfg->ops->set_hw_reg(hw, 416 HW_VAR_AID, NULL); 417 tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1); 418 rtl_write_byte(rtlpriv, REG_CR + 1, 419 (tmp_regcr | BIT(0))); 420 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); 421 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); 422 tmp_reg422 = rtl_read_byte(rtlpriv, 423 REG_FWHW_TXQ_CTRL + 2); 424 if (tmp_reg422 & BIT(6)) 425 recover = true; 426 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, 427 tmp_reg422 & (~BIT(6))); 428 rtl92d_set_fw_rsvdpagepkt(hw, 0); 429 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); 430 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); 431 if (recover) 432 rtl_write_byte(rtlpriv, 433 REG_FWHW_TXQ_CTRL + 2, 434 tmp_reg422); 435 rtl_write_byte(rtlpriv, REG_CR + 1, 436 (tmp_regcr & ~(BIT(0)))); 437 } 438 rtl92d_set_fw_joinbss_report_cmd(hw, (*val)); 439 break; 440 } 441 case HW_VAR_AID: { 442 u16 u2btmp; 443 u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT); 444 u2btmp &= 0xC000; 445 rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp | 446 mac->assoc_id)); 447 break; 448 } 449 case HW_VAR_CORRECT_TSF: { 450 u8 btype_ibss = val[0]; 451 452 if (btype_ibss) 453 _rtl92de_stop_tx_beacon(hw); 454 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); 455 rtl_write_dword(rtlpriv, REG_TSFTR, 456 (u32) (mac->tsf & 0xffffffff)); 457 rtl_write_dword(rtlpriv, REG_TSFTR + 4, 458 (u32) ((mac->tsf >> 32) & 0xffffffff)); 459 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); 460 if (btype_ibss) 461 _rtl92de_resume_tx_beacon(hw); 462 463 break; 464 } 465 case HW_VAR_INT_MIGRATION: { 466 bool int_migration = *(bool *) (val); 467 468 if (int_migration) { 469 /* Set interrupt migration timer and 470 * corresponding Tx/Rx counter. 471 * timer 25ns*0xfa0=100us for 0xf packets. 472 * 0x306:Rx, 0x307:Tx */ 473 rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); 474 rtlpriv->dm.interrupt_migration = int_migration; 475 } else { 476 /* Reset all interrupt migration settings. */ 477 rtl_write_dword(rtlpriv, REG_INT_MIG, 0); 478 rtlpriv->dm.interrupt_migration = int_migration; 479 } 480 break; 481 } 482 case HW_VAR_INT_AC: { 483 bool disable_ac_int = *((bool *) val); 484 485 /* Disable four ACs interrupts. */ 486 if (disable_ac_int) { 487 /* Disable VO, VI, BE and BK four AC interrupts 488 * to gain more efficient CPU utilization. 489 * When extremely highly Rx OK occurs, 490 * we will disable Tx interrupts. 491 */ 492 rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, 493 RT_AC_INT_MASKS); 494 rtlpriv->dm.disable_tx_int = disable_ac_int; 495 /* Enable four ACs interrupts. */ 496 } else { 497 rtlpriv->cfg->ops->update_interrupt_mask(hw, 498 RT_AC_INT_MASKS, 0); 499 rtlpriv->dm.disable_tx_int = disable_ac_int; 500 } 501 break; 502 } 503 default: 504 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 505 "switch case not processed\n"); 506 break; 507 } 508} 509 510static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data) 511{ 512 struct rtl_priv *rtlpriv = rtl_priv(hw); 513 bool status = true; 514 long count = 0; 515 u32 value = _LLT_INIT_ADDR(address) | 516 _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); 517 518 rtl_write_dword(rtlpriv, REG_LLT_INIT, value); 519 do { 520 value = rtl_read_dword(rtlpriv, REG_LLT_INIT); 521 if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) 522 break; 523 if (count > POLLING_LLT_THRESHOLD) { 524 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 525 "Failed to polling write LLT done at address %d!\n", 526 address); 527 status = false; 528 break; 529 } 530 } while (++count); 531 return status; 532} 533 534static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw) 535{ 536 struct rtl_priv *rtlpriv = rtl_priv(hw); 537 unsigned short i; 538 u8 txpktbuf_bndy; 539 u8 maxPage; 540 bool status; 541 u32 value32; /* High+low page number */ 542 u8 value8; /* normal page number */ 543 544 if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { 545 maxPage = 255; 546 txpktbuf_bndy = 246; 547 value8 = 0; 548 value32 = 0x80bf0d29; 549 } else { 550 maxPage = 127; 551 txpktbuf_bndy = 123; 552 value8 = 0; 553 value32 = 0x80750005; 554 } 555 556 /* Set reserved page for each queue */ 557 /* 11. RQPN 0x200[31:0] = 0x80BD1C1C */ 558 /* load RQPN */ 559 rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); 560 rtl_write_dword(rtlpriv, REG_RQPN, value32); 561 562 /* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */ 563 /* TXRKTBUG_PG_BNDY */ 564 rtl_write_dword(rtlpriv, REG_TRXFF_BNDY, 565 (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 | 566 txpktbuf_bndy)); 567 568 /* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */ 569 /* Beacon Head for TXDMA */ 570 rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy); 571 572 /* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */ 573 /* BCNQ_PGBNDY */ 574 rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); 575 rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); 576 577 /* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */ 578 /* WMAC_LBK_BF_HD */ 579 rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy); 580 581 /* Set Tx/Rx page size (Tx must be 128 Bytes, */ 582 /* Rx can be 64,128,256,512,1024 bytes) */ 583 /* 16. PBP [7:0] = 0x11 */ 584 /* TRX page size */ 585 rtl_write_byte(rtlpriv, REG_PBP, 0x11); 586 587 /* 17. DRV_INFO_SZ = 0x04 */ 588 rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4); 589 590 /* 18. LLT_table_init(Adapter); */ 591 for (i = 0; i < (txpktbuf_bndy - 1); i++) { 592 status = _rtl92de_llt_write(hw, i, i + 1); 593 if (true != status) 594 return status; 595 } 596 597 /* end of list */ 598 status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF); 599 if (true != status) 600 return status; 601 602 /* Make the other pages as ring buffer */ 603 /* This ring buffer is used as beacon buffer if we */ 604 /* config this MAC as two MAC transfer. */ 605 /* Otherwise used as local loopback buffer. */ 606 for (i = txpktbuf_bndy; i < maxPage; i++) { 607 status = _rtl92de_llt_write(hw, i, (i + 1)); 608 if (true != status) 609 return status; 610 } 611 612 /* Let last entry point to the start entry of ring buffer */ 613 status = _rtl92de_llt_write(hw, maxPage, txpktbuf_bndy); 614 if (true != status) 615 return status; 616 617 return true; 618} 619 620static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw) 621{ 622 struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); 623 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 624 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 625 struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); 626 627 if (rtlpci->up_first_time) 628 return; 629 if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) 630 rtl92de_sw_led_on(hw, pLed0); 631 else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT) 632 rtl92de_sw_led_on(hw, pLed0); 633 else 634 rtl92de_sw_led_off(hw, pLed0); 635} 636 637static bool _rtl92de_init_mac(struct ieee80211_hw *hw) 638{ 639 struct rtl_priv *rtlpriv = rtl_priv(hw); 640 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 641 unsigned char bytetmp; 642 unsigned short wordtmp; 643 u16 retry; 644 645 rtl92d_phy_set_poweron(hw); 646 /* Add for resume sequence of power domain according 647 * to power document V11. Chapter V.11.... */ 648 /* 0. RSV_CTRL 0x1C[7:0] = 0x00 */ 649 /* unlock ISO/CLK/Power control register */ 650 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00); 651 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05); 652 653 /* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */ 654 /* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */ 655 /* 3. delay (1ms) this is not necessary when initially power on */ 656 657 /* C. Resume Sequence */ 658 /* a. SPS0_CTRL 0x11[7:0] = 0x2b */ 659 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b); 660 661 /* b. AFE_XTAL_CTRL [7:0] = 0x0F */ 662 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F); 663 664 /* c. DRV runs power on init flow */ 665 666 /* auto enable WLAN */ 667 /* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */ 668 /* Power On Reset for MAC Block */ 669 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0); 670 udelay(2); 671 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp); 672 udelay(2); 673 674 /* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */ 675 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); 676 udelay(50); 677 retry = 0; 678 while ((bytetmp & BIT(0)) && retry < 1000) { 679 retry++; 680 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); 681 udelay(50); 682 } 683 684 /* Enable Radio off, GPIO, and LED function */ 685 /* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */ 686 rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012); 687 688 /* release RF digital isolation */ 689 /* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */ 690 /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */ 691 rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82); 692 udelay(2); 693 694 /* make sure that BB reset OK. */ 695 /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */ 696 697 /* Disable REG_CR before enable it to assure reset */ 698 rtl_write_word(rtlpriv, REG_CR, 0x0); 699 700 /* Release MAC IO register reset */ 701 rtl_write_word(rtlpriv, REG_CR, 0x2ff); 702 703 /* clear stopping tx/rx dma */ 704 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0); 705 706 /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */ 707 708 /* System init */ 709 /* 18. LLT_table_init(Adapter); */ 710 if (!_rtl92de_llt_table_init(hw)) 711 return false; 712 713 /* Clear interrupt and enable interrupt */ 714 /* 19. HISR 0x124[31:0] = 0xffffffff; */ 715 /* HISRE 0x12C[7:0] = 0xFF */ 716 rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff); 717 rtl_write_byte(rtlpriv, REG_HISRE, 0xff); 718 719 /* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */ 720 /* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */ 721 /* The IMR should be enabled later after all init sequence 722 * is finished. */ 723 724 /* 22. PCIE configuration space configuration */ 725 /* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */ 726 /* and PCIe gated clock function is enabled. */ 727 /* PCIE configuration space will be written after 728 * all init sequence.(Or by BIOS) */ 729 730 rtl92d_phy_config_maccoexist_rfpage(hw); 731 732 /* THe below section is not related to power document Vxx . */ 733 /* This is only useful for driver and OS setting. */ 734 /* -------------------Software Relative Setting---------------------- */ 735 wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL); 736 wordtmp &= 0xf; 737 wordtmp |= 0xF771; 738 rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp); 739 740 /* Reported Tx status from HW for rate adaptive. */ 741 /* This should be realtive to power on step 14. But in document V11 */ 742 /* still not contain the description.!!! */ 743 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F); 744 745 /* Set Tx/Rx page size (Tx must be 128 Bytes, 746 * Rx can be 64,128,256,512,1024 bytes) */ 747 /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */ 748 749 /* Set RCR register */ 750 rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config); 751 /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */ 752 753 /* Set TCR register */ 754 rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config); 755 756 /* disable earlymode */ 757 rtl_write_byte(rtlpriv, 0x4d0, 0x0); 758 759 /* Set TX/RX descriptor physical address(from OS API). */ 760 rtl_write_dword(rtlpriv, REG_BCNQ_DESA, 761 rtlpci->tx_ring[BEACON_QUEUE].dma); 762 rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma); 763 rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma); 764 rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma); 765 rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma); 766 rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma); 767 rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma); 768 /* Set RX Desc Address */ 769 rtl_write_dword(rtlpriv, REG_RX_DESA, 770 rtlpci->rx_ring[RX_MPDU_QUEUE].dma); 771 772 /* if we want to support 64 bit DMA, we should set it here, 773 * but now we do not support 64 bit DMA*/ 774 775 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33); 776 777 /* Reset interrupt migration setting when initialization */ 778 rtl_write_dword(rtlpriv, REG_INT_MIG, 0); 779 780 /* Reconsider when to do this operation after asking HWSD. */ 781 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); 782 rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6)); 783 do { 784 retry++; 785 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); 786 } while ((retry < 200) && !(bytetmp & BIT(7))); 787 788 /* After MACIO reset,we must refresh LED state. */ 789 _rtl92de_gen_refresh_led_state(hw); 790 791 /* Reset H2C protection register */ 792 rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0); 793 794 return true; 795} 796 797static void _rtl92de_hw_configure(struct ieee80211_hw *hw) 798{ 799 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 800 struct rtl_priv *rtlpriv = rtl_priv(hw); 801 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 802 u8 reg_bw_opmode = BW_OPMODE_20MHZ; 803 u32 reg_rrsr; 804 805 reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; 806 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8); 807 rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode); 808 rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr); 809 rtl_write_byte(rtlpriv, REG_SLOT, 0x09); 810 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0); 811 rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80); 812 rtl_write_word(rtlpriv, REG_RL, 0x0707); 813 rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802); 814 rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF); 815 rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000); 816 rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504); 817 rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000); 818 rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504); 819 /* Aggregation threshold */ 820 if (rtlhal->macphymode == DUALMAC_DUALPHY) 821 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641); 822 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) 823 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641); 824 else 825 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841); 826 rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2); 827 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); 828 rtlpci->reg_bcn_ctrl_val = 0x1f; 829 rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val); 830 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); 831 rtl_write_byte(rtlpriv, REG_PIFS, 0x1C); 832 rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16); 833 rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020); 834 /* For throughput */ 835 rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666); 836 /* ACKTO for IOT issue. */ 837 rtl_write_byte(rtlpriv, REG_ACKTO, 0x40); 838 /* Set Spec SIFS (used in NAV) */ 839 rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010); 840 rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010); 841 /* Set SIFS for CCK */ 842 rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010); 843 /* Set SIFS for OFDM */ 844 rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010); 845 /* Set Multicast Address. */ 846 rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff); 847 rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff); 848 switch (rtlpriv->phy.rf_type) { 849 case RF_1T2R: 850 case RF_1T1R: 851 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); 852 break; 853 case RF_2T2R: 854 case RF_2T2R_GREEN: 855 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); 856 break; 857 } 858} 859 860static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw) 861{ 862 struct rtl_priv *rtlpriv = rtl_priv(hw); 863 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 864 865 rtl_write_byte(rtlpriv, 0x34b, 0x93); 866 rtl_write_word(rtlpriv, 0x350, 0x870c); 867 rtl_write_byte(rtlpriv, 0x352, 0x1); 868 if (ppsc->support_backdoor) 869 rtl_write_byte(rtlpriv, 0x349, 0x1b); 870 else 871 rtl_write_byte(rtlpriv, 0x349, 0x03); 872 rtl_write_word(rtlpriv, 0x350, 0x2718); 873 rtl_write_byte(rtlpriv, 0x352, 0x1); 874} 875 876void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw) 877{ 878 struct rtl_priv *rtlpriv = rtl_priv(hw); 879 u8 sec_reg_value; 880 881 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 882 "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n", 883 rtlpriv->sec.pairwise_enc_algorithm, 884 rtlpriv->sec.group_enc_algorithm); 885 if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { 886 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, 887 "not open hw encryption\n"); 888 return; 889 } 890 sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE; 891 if (rtlpriv->sec.use_defaultkey) { 892 sec_reg_value |= SCR_TXUSEDK; 893 sec_reg_value |= SCR_RXUSEDK; 894 } 895 sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK); 896 rtl_write_byte(rtlpriv, REG_CR + 1, 0x02); 897 RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, 898 "The SECR-value %x\n", sec_reg_value); 899 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); 900} 901 902int rtl92de_hw_init(struct ieee80211_hw *hw) 903{ 904 struct rtl_priv *rtlpriv = rtl_priv(hw); 905 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 906 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 907 struct rtl_phy *rtlphy = &(rtlpriv->phy); 908 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 909 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 910 bool rtstatus = true; 911 u8 tmp_u1b; 912 int i; 913 int err; 914 unsigned long flags; 915 916 rtlpci->being_init_adapter = true; 917 rtlpci->init_ready = false; 918 spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); 919 /* we should do iqk after disable/enable */ 920 rtl92d_phy_reset_iqk_result(hw); 921 /* rtlpriv->intf_ops->disable_aspm(hw); */ 922 rtstatus = _rtl92de_init_mac(hw); 923 if (!rtstatus) { 924 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n"); 925 err = 1; 926 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 927 return err; 928 } 929 err = rtl92d_download_fw(hw); 930 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 931 if (err) { 932 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, 933 "Failed to download FW. Init HW without FW..\n"); 934 return 1; 935 } 936 rtlhal->last_hmeboxnum = 0; 937 rtlpriv->psc.fw_current_inpsmode = false; 938 939 tmp_u1b = rtl_read_byte(rtlpriv, 0x605); 940 tmp_u1b = tmp_u1b | 0x30; 941 rtl_write_byte(rtlpriv, 0x605, tmp_u1b); 942 943 if (rtlhal->earlymode_enable) { 944 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 945 "EarlyMode Enabled!!!\n"); 946 947 tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0); 948 tmp_u1b = tmp_u1b | 0x1f; 949 rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b); 950 951 rtl_write_byte(rtlpriv, 0x4d3, 0x80); 952 953 tmp_u1b = rtl_read_byte(rtlpriv, 0x605); 954 tmp_u1b = tmp_u1b | 0x40; 955 rtl_write_byte(rtlpriv, 0x605, tmp_u1b); 956 } 957 958 if (mac->rdg_en) { 959 rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff); 960 rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200); 961 rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05); 962 } 963 964 rtl92d_phy_mac_config(hw); 965 /* because last function modify RCR, so we update 966 * rcr var here, or TP will unstable for receive_config 967 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx 968 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/ 969 rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR); 970 rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); 971 972 rtl92d_phy_bb_config(hw); 973 974 rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; 975 /* set before initialize RF */ 976 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); 977 978 /* config RF */ 979 rtl92d_phy_rf_config(hw); 980 981 /* After read predefined TXT, we must set BB/MAC/RF 982 * register as our requirement */ 983 /* After load BB,RF params,we need do more for 92D. */ 984 rtl92d_update_bbrf_configuration(hw); 985 /* set default value after initialize RF, */ 986 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0); 987 rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0, 988 RF_CHNLBW, RFREG_OFFSET_MASK); 989 rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1, 990 RF_CHNLBW, RFREG_OFFSET_MASK); 991 992 /*---- Set CCK and OFDM Block "ON"----*/ 993 if (rtlhal->current_bandtype == BAND_ON_2_4G) 994 rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); 995 rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); 996 if (rtlhal->interfaceindex == 0) { 997 /* RFPGA0_ANALOGPARAMETER2: cck clock select, 998 * set to 20MHz by default */ 999 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) | 1000 BIT(11), 3); 1001 } else { 1002 /* Mac1 */ 1003 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) | 1004 BIT(10), 3); 1005 } 1006 1007 _rtl92de_hw_configure(hw); 1008 1009 /* reset hw sec */ 1010 rtl_cam_reset_all_entry(hw); 1011 rtl92de_enable_hw_security_config(hw); 1012 1013 /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ 1014 /* TX power index for different rate set. */ 1015 rtl92d_phy_get_hw_reg_originalvalue(hw); 1016 rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel); 1017 1018 ppsc->rfpwr_state = ERFON; 1019 1020 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); 1021 1022 _rtl92de_enable_aspm_back_door(hw); 1023 /* rtlpriv->intf_ops->enable_aspm(hw); */ 1024 1025 rtl92d_dm_init(hw); 1026 rtlpci->being_init_adapter = false; 1027 1028 if (ppsc->rfpwr_state == ERFON) { 1029 rtl92d_phy_lc_calibrate(hw); 1030 /* 5G and 2.4G must wait sometime to let RF LO ready */ 1031 if (rtlhal->macphymode == DUALMAC_DUALPHY) { 1032 u32 tmp_rega; 1033 for (i = 0; i < 10000; i++) { 1034 udelay(MAX_STALL_TIME); 1035 1036 tmp_rega = rtl_get_rfreg(hw, 1037 (enum radio_path)RF90_PATH_A, 1038 0x2a, MASKDWORD); 1039 1040 if (((tmp_rega & BIT(11)) == BIT(11))) 1041 break; 1042 } 1043 /* check that loop was successful. If not, exit now */ 1044 if (i == 10000) { 1045 rtlpci->init_ready = false; 1046 return 1; 1047 } 1048 } 1049 } 1050 rtlpci->init_ready = true; 1051 return err; 1052} 1053 1054static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw) 1055{ 1056 struct rtl_priv *rtlpriv = rtl_priv(hw); 1057 enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY; 1058 u32 value32; 1059 1060 value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG); 1061 if (!(value32 & 0x000f0000)) { 1062 version = VERSION_TEST_CHIP_92D_SINGLEPHY; 1063 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "TEST CHIP!!!\n"); 1064 } else { 1065 version = VERSION_NORMAL_CHIP_92D_SINGLEPHY; 1066 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Normal CHIP!!!\n"); 1067 } 1068 return version; 1069} 1070 1071static int _rtl92de_set_media_status(struct ieee80211_hw *hw, 1072 enum nl80211_iftype type) 1073{ 1074 struct rtl_priv *rtlpriv = rtl_priv(hw); 1075 u8 bt_msr = rtl_read_byte(rtlpriv, MSR); 1076 enum led_ctl_mode ledaction = LED_CTL_NO_LINK; 1077 u8 bcnfunc_enable; 1078 1079 bt_msr &= 0xfc; 1080 1081 if (type == NL80211_IFTYPE_UNSPECIFIED || 1082 type == NL80211_IFTYPE_STATION) { 1083 _rtl92de_stop_tx_beacon(hw); 1084 _rtl92de_enable_bcn_sub_func(hw); 1085 } else if (type == NL80211_IFTYPE_ADHOC || 1086 type == NL80211_IFTYPE_AP) { 1087 _rtl92de_resume_tx_beacon(hw); 1088 _rtl92de_disable_bcn_sub_func(hw); 1089 } else { 1090 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, 1091 "Set HW_VAR_MEDIA_STATUS: No such media status(%x)\n", 1092 type); 1093 } 1094 bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL); 1095 switch (type) { 1096 case NL80211_IFTYPE_UNSPECIFIED: 1097 bt_msr |= MSR_NOLINK; 1098 ledaction = LED_CTL_LINK; 1099 bcnfunc_enable &= 0xF7; 1100 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, 1101 "Set Network type to NO LINK!\n"); 1102 break; 1103 case NL80211_IFTYPE_ADHOC: 1104 bt_msr |= MSR_ADHOC; 1105 bcnfunc_enable |= 0x08; 1106 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, 1107 "Set Network type to Ad Hoc!\n"); 1108 break; 1109 case NL80211_IFTYPE_STATION: 1110 bt_msr |= MSR_INFRA; 1111 ledaction = LED_CTL_LINK; 1112 bcnfunc_enable &= 0xF7; 1113 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, 1114 "Set Network type to STA!\n"); 1115 break; 1116 case NL80211_IFTYPE_AP: 1117 bt_msr |= MSR_AP; 1118 bcnfunc_enable |= 0x08; 1119 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, 1120 "Set Network type to AP!\n"); 1121 break; 1122 default: 1123 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 1124 "Network type %d not supported!\n", type); 1125 return 1; 1126 break; 1127 1128 } 1129 rtl_write_byte(rtlpriv, MSR, bt_msr); 1130 rtlpriv->cfg->ops->led_control(hw, ledaction); 1131 if ((bt_msr & MSR_MASK) == MSR_AP) 1132 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00); 1133 else 1134 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66); 1135 return 0; 1136} 1137 1138void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) 1139{ 1140 struct rtl_priv *rtlpriv = rtl_priv(hw); 1141 u32 reg_rcr; 1142 1143 if (rtlpriv->psc.rfpwr_state != ERFON) 1144 return; 1145 1146 rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 1147 1148 if (check_bssid) { 1149 reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); 1150 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 1151 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); 1152 } else if (!check_bssid) { 1153 reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); 1154 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); 1155 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 1156 } 1157} 1158 1159int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) 1160{ 1161 struct rtl_priv *rtlpriv = rtl_priv(hw); 1162 1163 if (_rtl92de_set_media_status(hw, type)) 1164 return -EOPNOTSUPP; 1165 1166 /* check bssid */ 1167 if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { 1168 if (type != NL80211_IFTYPE_AP) 1169 rtl92de_set_check_bssid(hw, true); 1170 } else { 1171 rtl92de_set_check_bssid(hw, false); 1172 } 1173 return 0; 1174} 1175 1176/* do iqk or reload iqk */ 1177/* windows just rtl92d_phy_reload_iqk_setting in set channel, 1178 * but it's very strict for time sequence so we add 1179 * rtl92d_phy_reload_iqk_setting here */ 1180void rtl92d_linked_set_reg(struct ieee80211_hw *hw) 1181{ 1182 struct rtl_priv *rtlpriv = rtl_priv(hw); 1183 struct rtl_phy *rtlphy = &(rtlpriv->phy); 1184 u8 indexforchannel; 1185 u8 channel = rtlphy->current_channel; 1186 1187 indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel); 1188 if (!rtlphy->iqk_matrix[indexforchannel].iqk_done) { 1189 RT_TRACE(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG, 1190 "Do IQK for channel:%d\n", channel); 1191 rtl92d_phy_iq_calibrate(hw); 1192 } 1193} 1194 1195/* don't set REG_EDCA_BE_PARAM here because 1196 * mac80211 will send pkt when scan */ 1197void rtl92de_set_qos(struct ieee80211_hw *hw, int aci) 1198{ 1199 rtl92d_dm_init_edca_turbo(hw); 1200} 1201 1202void rtl92de_enable_interrupt(struct ieee80211_hw *hw) 1203{ 1204 struct rtl_priv *rtlpriv = rtl_priv(hw); 1205 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1206 1207 rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF); 1208 rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF); 1209} 1210 1211void rtl92de_disable_interrupt(struct ieee80211_hw *hw) 1212{ 1213 struct rtl_priv *rtlpriv = rtl_priv(hw); 1214 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1215 1216 rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED); 1217 rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED); 1218 synchronize_irq(rtlpci->pdev->irq); 1219} 1220 1221static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw) 1222{ 1223 struct rtl_priv *rtlpriv = rtl_priv(hw); 1224 u8 u1b_tmp; 1225 unsigned long flags; 1226 1227 rtlpriv->intf_ops->enable_aspm(hw); 1228 rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00); 1229 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0); 1230 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0); 1231 1232 /* 0x20:value 05-->04 */ 1233 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04); 1234 1235 /* ==== Reset digital sequence ====== */ 1236 rtl92d_firmware_selfreset(hw); 1237 1238 /* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */ 1239 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51); 1240 1241 /* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */ 1242 rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00); 1243 1244 /* ==== Pull GPIO PIN to balance level and LED control ====== */ 1245 1246 /* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */ 1247 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000); 1248 1249 /* i. Value = GPIO_PIN_CTRL[7:0] */ 1250 u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL); 1251 1252 /* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */ 1253 /* write external PIN level */ 1254 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 1255 0x00FF0000 | (u1b_tmp << 8)); 1256 1257 /* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */ 1258 rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790); 1259 1260 /* l. LEDCFG 0x4C[15:0] = 0x8080 */ 1261 rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080); 1262 1263 /* ==== Disable analog sequence === */ 1264 1265 /* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */ 1266 rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80); 1267 1268 /* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */ 1269 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23); 1270 1271 /* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */ 1272 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e); 1273 1274 /* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */ 1275 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e); 1276 1277 /* ==== interface into suspend === */ 1278 1279 /* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */ 1280 /* According to power document V11, we need to set this */ 1281 /* value as 0x18. Otherwise, we may not L0s sometimes. */ 1282 /* This indluences power consumption. Bases on SD1's test, */ 1283 /* set as 0x00 do not affect power current. And if it */ 1284 /* is set as 0x18, they had ever met auto load fail problem. */ 1285 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10); 1286 1287 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1288 "In PowerOff,reg0x%x=%X\n", 1289 REG_SPS0_CTRL, rtl_read_byte(rtlpriv, REG_SPS0_CTRL)); 1290 /* r. Note: for PCIe interface, PON will not turn */ 1291 /* off m-bias and BandGap in PCIe suspend mode. */ 1292 1293 /* 0x17[7] 1b': power off in process 0b' : power off over */ 1294 if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { 1295 spin_lock_irqsave(&globalmutex_power, flags); 1296 u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS); 1297 u1b_tmp &= (~BIT(7)); 1298 rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp); 1299 spin_unlock_irqrestore(&globalmutex_power, flags); 1300 } 1301 1302 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "<=======\n"); 1303} 1304 1305void rtl92de_card_disable(struct ieee80211_hw *hw) 1306{ 1307 struct rtl_priv *rtlpriv = rtl_priv(hw); 1308 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 1309 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1310 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1311 enum nl80211_iftype opmode; 1312 1313 mac->link_state = MAC80211_NOLINK; 1314 opmode = NL80211_IFTYPE_UNSPECIFIED; 1315 _rtl92de_set_media_status(hw, opmode); 1316 1317 if (rtlpci->driver_is_goingto_unload || 1318 ppsc->rfoff_reason > RF_CHANGE_BY_PS) 1319 rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); 1320 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); 1321 /* Power sequence for each MAC. */ 1322 /* a. stop tx DMA */ 1323 /* b. close RF */ 1324 /* c. clear rx buf */ 1325 /* d. stop rx DMA */ 1326 /* e. reset MAC */ 1327 1328 /* a. stop tx DMA */ 1329 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE); 1330 udelay(50); 1331 1332 /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */ 1333 1334 /* c. ========RF OFF sequence========== */ 1335 /* 0x88c[23:20] = 0xf. */ 1336 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); 1337 rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00); 1338 1339 /* APSD_CTRL 0x600[7:0] = 0x40 */ 1340 rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40); 1341 1342 /* Close antenna 0,0xc04,0xd04 */ 1343 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0); 1344 rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0); 1345 1346 /* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */ 1347 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2); 1348 1349 /* Mac0 can not do Global reset. Mac1 can do. */ 1350 /* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */ 1351 if (rtlpriv->rtlhal.interfaceindex == 1) 1352 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0); 1353 udelay(50); 1354 1355 /* d. stop tx/rx dma before disable REG_CR (0x100) to fix */ 1356 /* dma hang issue when disable/enable device. */ 1357 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff); 1358 udelay(50); 1359 rtl_write_byte(rtlpriv, REG_CR, 0x0); 1360 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "==> Do power off.......\n"); 1361 if (rtl92d_phy_check_poweroff(hw)) 1362 _rtl92de_poweroff_adapter(hw); 1363 return; 1364} 1365 1366void rtl92de_interrupt_recognized(struct ieee80211_hw *hw, 1367 u32 *p_inta, u32 *p_intb) 1368{ 1369 struct rtl_priv *rtlpriv = rtl_priv(hw); 1370 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1371 1372 *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; 1373 rtl_write_dword(rtlpriv, ISR, *p_inta); 1374 1375 /* 1376 * *p_intb = rtl_read_dword(rtlpriv, REG_HISRE) & rtlpci->irq_mask[1]; 1377 * rtl_write_dword(rtlpriv, ISR + 4, *p_intb); 1378 */ 1379} 1380 1381void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw) 1382{ 1383 struct rtl_priv *rtlpriv = rtl_priv(hw); 1384 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1385 u16 bcn_interval, atim_window; 1386 1387 bcn_interval = mac->beacon_interval; 1388 atim_window = 2; 1389 /*rtl92de_disable_interrupt(hw); */ 1390 rtl_write_word(rtlpriv, REG_ATIMWND, atim_window); 1391 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); 1392 rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f); 1393 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20); 1394 if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G) 1395 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30); 1396 else 1397 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20); 1398 rtl_write_byte(rtlpriv, 0x606, 0x30); 1399} 1400 1401void rtl92de_set_beacon_interval(struct ieee80211_hw *hw) 1402{ 1403 struct rtl_priv *rtlpriv = rtl_priv(hw); 1404 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1405 u16 bcn_interval = mac->beacon_interval; 1406 1407 RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG, 1408 "beacon_interval:%d\n", bcn_interval); 1409 /* rtl92de_disable_interrupt(hw); */ 1410 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); 1411 /* rtl92de_enable_interrupt(hw); */ 1412} 1413 1414void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw, 1415 u32 add_msr, u32 rm_msr) 1416{ 1417 struct rtl_priv *rtlpriv = rtl_priv(hw); 1418 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1419 1420 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n", 1421 add_msr, rm_msr); 1422 if (add_msr) 1423 rtlpci->irq_mask[0] |= add_msr; 1424 if (rm_msr) 1425 rtlpci->irq_mask[0] &= (~rm_msr); 1426 rtl92de_disable_interrupt(hw); 1427 rtl92de_enable_interrupt(hw); 1428} 1429 1430static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo, 1431 u8 *rom_content, bool autoLoadfail) 1432{ 1433 u32 rfpath, eeaddr, group, offset1, offset2; 1434 u8 i; 1435 1436 memset(pwrinfo, 0, sizeof(struct txpower_info)); 1437 if (autoLoadfail) { 1438 for (group = 0; group < CHANNEL_GROUP_MAX; group++) { 1439 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1440 if (group < CHANNEL_GROUP_MAX_2G) { 1441 pwrinfo->cck_index[rfpath][group] = 1442 EEPROM_DEFAULT_TXPOWERLEVEL_2G; 1443 pwrinfo->ht40_1sindex[rfpath][group] = 1444 EEPROM_DEFAULT_TXPOWERLEVEL_2G; 1445 } else { 1446 pwrinfo->ht40_1sindex[rfpath][group] = 1447 EEPROM_DEFAULT_TXPOWERLEVEL_5G; 1448 } 1449 pwrinfo->ht40_2sindexdiff[rfpath][group] = 1450 EEPROM_DEFAULT_HT40_2SDIFF; 1451 pwrinfo->ht20indexdiff[rfpath][group] = 1452 EEPROM_DEFAULT_HT20_DIFF; 1453 pwrinfo->ofdmindexdiff[rfpath][group] = 1454 EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; 1455 pwrinfo->ht40maxoffset[rfpath][group] = 1456 EEPROM_DEFAULT_HT40_PWRMAXOFFSET; 1457 pwrinfo->ht20maxoffset[rfpath][group] = 1458 EEPROM_DEFAULT_HT20_PWRMAXOFFSET; 1459 } 1460 } 1461 for (i = 0; i < 3; i++) { 1462 pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI; 1463 pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI; 1464 } 1465 return; 1466 } 1467 1468 /* Maybe autoload OK,buf the tx power index value is not filled. 1469 * If we find it, we set it to default value. */ 1470 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1471 for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) { 1472 eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3) 1473 + group; 1474 pwrinfo->cck_index[rfpath][group] = 1475 (rom_content[eeaddr] == 0xFF) ? 1476 (eeaddr > 0x7B ? 1477 EEPROM_DEFAULT_TXPOWERLEVEL_5G : 1478 EEPROM_DEFAULT_TXPOWERLEVEL_2G) : 1479 rom_content[eeaddr]; 1480 } 1481 } 1482 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1483 for (group = 0; group < CHANNEL_GROUP_MAX; group++) { 1484 offset1 = group / 3; 1485 offset2 = group % 3; 1486 eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) + 1487 offset2 + offset1 * 21; 1488 pwrinfo->ht40_1sindex[rfpath][group] = 1489 (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ? 1490 EEPROM_DEFAULT_TXPOWERLEVEL_5G : 1491 EEPROM_DEFAULT_TXPOWERLEVEL_2G) : 1492 rom_content[eeaddr]; 1493 } 1494 } 1495 /* These just for 92D efuse offset. */ 1496 for (group = 0; group < CHANNEL_GROUP_MAX; group++) { 1497 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1498 int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G; 1499 1500 offset1 = group / 3; 1501 offset2 = group % 3; 1502 1503 if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF) 1504 pwrinfo->ht40_2sindexdiff[rfpath][group] = 1505 (rom_content[base1 + 1506 offset2 + offset1 * 21] >> (rfpath * 4)) 1507 & 0xF; 1508 else 1509 pwrinfo->ht40_2sindexdiff[rfpath][group] = 1510 EEPROM_DEFAULT_HT40_2SDIFF; 1511 if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2 1512 + offset1 * 21] != 0xFF) 1513 pwrinfo->ht20indexdiff[rfpath][group] = 1514 (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G 1515 + offset2 + offset1 * 21] >> (rfpath * 4)) 1516 & 0xF; 1517 else 1518 pwrinfo->ht20indexdiff[rfpath][group] = 1519 EEPROM_DEFAULT_HT20_DIFF; 1520 if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2 1521 + offset1 * 21] != 0xFF) 1522 pwrinfo->ofdmindexdiff[rfpath][group] = 1523 (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G 1524 + offset2 + offset1 * 21] >> (rfpath * 4)) 1525 & 0xF; 1526 else 1527 pwrinfo->ofdmindexdiff[rfpath][group] = 1528 EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; 1529 if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2 1530 + offset1 * 21] != 0xFF) 1531 pwrinfo->ht40maxoffset[rfpath][group] = 1532 (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G 1533 + offset2 + offset1 * 21] >> (rfpath * 4)) 1534 & 0xF; 1535 else 1536 pwrinfo->ht40maxoffset[rfpath][group] = 1537 EEPROM_DEFAULT_HT40_PWRMAXOFFSET; 1538 if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2 1539 + offset1 * 21] != 0xFF) 1540 pwrinfo->ht20maxoffset[rfpath][group] = 1541 (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + 1542 offset2 + offset1 * 21] >> (rfpath * 4)) & 1543 0xF; 1544 else 1545 pwrinfo->ht20maxoffset[rfpath][group] = 1546 EEPROM_DEFAULT_HT20_PWRMAXOFFSET; 1547 } 1548 } 1549 if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) { 1550 /* 5GL */ 1551 pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F; 1552 pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F; 1553 /* 5GM */ 1554 pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F; 1555 pwrinfo->tssi_b[1] = 1556 (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 | 1557 (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2; 1558 /* 5GH */ 1559 pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] & 1560 0xF0) >> 4 | 1561 (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4; 1562 pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] & 1563 0xFC) >> 2; 1564 } else { 1565 for (i = 0; i < 3; i++) { 1566 pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI; 1567 pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI; 1568 } 1569 } 1570} 1571 1572static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw, 1573 bool autoload_fail, u8 *hwinfo) 1574{ 1575 struct rtl_priv *rtlpriv = rtl_priv(hw); 1576 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 1577 struct txpower_info pwrinfo; 1578 u8 tempval[2], i, pwr, diff; 1579 u32 ch, rfPath, group; 1580 1581 _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail); 1582 if (!autoload_fail) { 1583 /* bit0~2 */ 1584 rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7); 1585 rtlefuse->eeprom_thermalmeter = 1586 hwinfo[EEPROM_THERMAL_METER] & 0x1f; 1587 rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K]; 1588 tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03; 1589 tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2; 1590 rtlefuse->txpwr_fromeprom = true; 1591 if (IS_92D_D_CUT(rtlpriv->rtlhal.version) || 1592 IS_92D_E_CUT(rtlpriv->rtlhal.version)) { 1593 rtlefuse->internal_pa_5g[0] = 1594 !((hwinfo[EEPROM_TSSI_A_5G] & BIT(6)) >> 6); 1595 rtlefuse->internal_pa_5g[1] = 1596 !((hwinfo[EEPROM_TSSI_B_5G] & BIT(6)) >> 6); 1597 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, 1598 "Is D cut,Internal PA0 %d Internal PA1 %d\n", 1599 rtlefuse->internal_pa_5g[0], 1600 rtlefuse->internal_pa_5g[1]); 1601 } 1602 rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6]; 1603 rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7]; 1604 } else { 1605 rtlefuse->eeprom_regulatory = 0; 1606 rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER; 1607 rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP; 1608 tempval[0] = tempval[1] = 3; 1609 } 1610 1611 /* Use default value to fill parameters if 1612 * efuse is not filled on some place. */ 1613 1614 /* ThermalMeter from EEPROM */ 1615 if (rtlefuse->eeprom_thermalmeter < 0x06 || 1616 rtlefuse->eeprom_thermalmeter > 0x1c) 1617 rtlefuse->eeprom_thermalmeter = 0x12; 1618 rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter; 1619 1620 /* check XTAL_K */ 1621 if (rtlefuse->crystalcap == 0xFF) 1622 rtlefuse->crystalcap = 0; 1623 if (rtlefuse->eeprom_regulatory > 3) 1624 rtlefuse->eeprom_regulatory = 0; 1625 1626 for (i = 0; i < 2; i++) { 1627 switch (tempval[i]) { 1628 case 0: 1629 tempval[i] = 5; 1630 break; 1631 case 1: 1632 tempval[i] = 4; 1633 break; 1634 case 2: 1635 tempval[i] = 3; 1636 break; 1637 case 3: 1638 default: 1639 tempval[i] = 0; 1640 break; 1641 } 1642 } 1643 1644 rtlefuse->delta_iqk = tempval[0]; 1645 if (tempval[1] > 0) 1646 rtlefuse->delta_lck = tempval[1] - 1; 1647 if (rtlefuse->eeprom_c9 == 0xFF) 1648 rtlefuse->eeprom_c9 = 0x00; 1649 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, 1650 "EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory); 1651 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, 1652 "ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter); 1653 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, 1654 "CrystalCap = 0x%x\n", rtlefuse->crystalcap); 1655 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, 1656 "Delta_IQK = 0x%x Delta_LCK = 0x%x\n", 1657 rtlefuse->delta_iqk, rtlefuse->delta_lck); 1658 1659 for (rfPath = 0; rfPath < RF6052_MAX_PATH; rfPath++) { 1660 for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) { 1661 group = rtl92d_get_chnlgroup_fromarray((u8) ch); 1662 if (ch < CHANNEL_MAX_NUMBER_2G) 1663 rtlefuse->txpwrlevel_cck[rfPath][ch] = 1664 pwrinfo.cck_index[rfPath][group]; 1665 rtlefuse->txpwrlevel_ht40_1s[rfPath][ch] = 1666 pwrinfo.ht40_1sindex[rfPath][group]; 1667 rtlefuse->txpwr_ht20diff[rfPath][ch] = 1668 pwrinfo.ht20indexdiff[rfPath][group]; 1669 rtlefuse->txpwr_legacyhtdiff[rfPath][ch] = 1670 pwrinfo.ofdmindexdiff[rfPath][group]; 1671 rtlefuse->pwrgroup_ht20[rfPath][ch] = 1672 pwrinfo.ht20maxoffset[rfPath][group]; 1673 rtlefuse->pwrgroup_ht40[rfPath][ch] = 1674 pwrinfo.ht40maxoffset[rfPath][group]; 1675 pwr = pwrinfo.ht40_1sindex[rfPath][group]; 1676 diff = pwrinfo.ht40_2sindexdiff[rfPath][group]; 1677 rtlefuse->txpwrlevel_ht40_2s[rfPath][ch] = 1678 (pwr > diff) ? (pwr - diff) : 0; 1679 } 1680 } 1681} 1682 1683static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw, 1684 u8 *content) 1685{ 1686 struct rtl_priv *rtlpriv = rtl_priv(hw); 1687 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1688 u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION]; 1689 1690 if (macphy_crvalue & BIT(3)) { 1691 rtlhal->macphymode = SINGLEMAC_SINGLEPHY; 1692 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1693 "MacPhyMode SINGLEMAC_SINGLEPHY\n"); 1694 } else { 1695 rtlhal->macphymode = DUALMAC_DUALPHY; 1696 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1697 "MacPhyMode DUALMAC_DUALPHY\n"); 1698 } 1699} 1700 1701static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw, 1702 u8 *content) 1703{ 1704 _rtl92de_read_macphymode_from_prom(hw, content); 1705 rtl92d_phy_config_macphymode(hw); 1706 rtl92d_phy_config_macphymode_info(hw); 1707} 1708 1709static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw) 1710{ 1711 struct rtl_priv *rtlpriv = rtl_priv(hw); 1712 enum version_8192d chipver = rtlpriv->rtlhal.version; 1713 u8 cutvalue[2]; 1714 u16 chipvalue; 1715 1716 rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H, 1717 &cutvalue[1]); 1718 rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L, 1719 &cutvalue[0]); 1720 chipvalue = (cutvalue[1] << 8) | cutvalue[0]; 1721 switch (chipvalue) { 1722 case 0xAA55: 1723 chipver |= CHIP_92D_C_CUT; 1724 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "C-CUT!!!\n"); 1725 break; 1726 case 0x9966: 1727 chipver |= CHIP_92D_D_CUT; 1728 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n"); 1729 break; 1730 case 0xCC33: 1731 chipver |= CHIP_92D_E_CUT; 1732 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n"); 1733 break; 1734 default: 1735 chipver |= CHIP_92D_D_CUT; 1736 RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown CUT!\n"); 1737 break; 1738 } 1739 rtlpriv->rtlhal.version = chipver; 1740} 1741 1742static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw) 1743{ 1744 struct rtl_priv *rtlpriv = rtl_priv(hw); 1745 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 1746 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1747 u16 i, usvalue; 1748 u8 hwinfo[HWSET_MAX_SIZE]; 1749 u16 eeprom_id; 1750 unsigned long flags; 1751 1752 if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { 1753 spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); 1754 rtl_efuse_shadow_map_update(hw); 1755 _rtl92de_efuse_update_chip_version(hw); 1756 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 1757 memcpy((void *)hwinfo, (void *)&rtlefuse->efuse_map 1758 [EFUSE_INIT_MAP][0], 1759 HWSET_MAX_SIZE); 1760 } else if (rtlefuse->epromtype == EEPROM_93C46) { 1761 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 1762 "RTL819X Not boot from eeprom, check it !!\n"); 1763 } 1764 RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP", 1765 hwinfo, HWSET_MAX_SIZE); 1766 1767 eeprom_id = *((u16 *)&hwinfo[0]); 1768 if (eeprom_id != RTL8190_EEPROM_ID) { 1769 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, 1770 "EEPROM ID(%#x) is invalid!!\n", eeprom_id); 1771 rtlefuse->autoload_failflag = true; 1772 } else { 1773 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); 1774 rtlefuse->autoload_failflag = false; 1775 } 1776 if (rtlefuse->autoload_failflag) { 1777 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 1778 "RTL819X Not boot from eeprom, check it !!\n"); 1779 return; 1780 } 1781 rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID]; 1782 _rtl92de_read_macphymode_and_bandtype(hw, hwinfo); 1783 1784 /* VID, DID SE 0xA-D */ 1785 rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID]; 1786 rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID]; 1787 rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID]; 1788 rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID]; 1789 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROMId = 0x%4x\n", eeprom_id); 1790 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1791 "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid); 1792 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1793 "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did); 1794 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1795 "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid); 1796 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1797 "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid); 1798 1799 /* Read Permanent MAC address */ 1800 if (rtlhal->interfaceindex == 0) { 1801 for (i = 0; i < 6; i += 2) { 1802 usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i]; 1803 *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; 1804 } 1805 } else { 1806 for (i = 0; i < 6; i += 2) { 1807 usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i]; 1808 *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; 1809 } 1810 } 1811 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, 1812 rtlefuse->dev_addr); 1813 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr); 1814 _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo); 1815 1816 /* Read Channel Plan */ 1817 switch (rtlhal->bandset) { 1818 case BAND_ON_2_4G: 1819 rtlefuse->channel_plan = COUNTRY_CODE_TELEC; 1820 break; 1821 case BAND_ON_5G: 1822 rtlefuse->channel_plan = COUNTRY_CODE_FCC; 1823 break; 1824 case BAND_ON_BOTH: 1825 rtlefuse->channel_plan = COUNTRY_CODE_FCC; 1826 break; 1827 default: 1828 rtlefuse->channel_plan = COUNTRY_CODE_FCC; 1829 break; 1830 } 1831 rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION]; 1832 rtlefuse->txpwr_fromeprom = true; 1833 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, 1834 "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid); 1835} 1836 1837void rtl92de_read_eeprom_info(struct ieee80211_hw *hw) 1838{ 1839 struct rtl_priv *rtlpriv = rtl_priv(hw); 1840 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 1841 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1842 u8 tmp_u1b; 1843 1844 rtlhal->version = _rtl92de_read_chip_version(hw); 1845 tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR); 1846 rtlefuse->autoload_status = tmp_u1b; 1847 if (tmp_u1b & BIT(4)) { 1848 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n"); 1849 rtlefuse->epromtype = EEPROM_93C46; 1850 } else { 1851 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n"); 1852 rtlefuse->epromtype = EEPROM_BOOT_EFUSE; 1853 } 1854 if (tmp_u1b & BIT(5)) { 1855 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); 1856 1857 rtlefuse->autoload_failflag = false; 1858 _rtl92de_read_adapter_info(hw); 1859 } else { 1860 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n"); 1861 } 1862 return; 1863} 1864 1865static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw, 1866 struct ieee80211_sta *sta) 1867{ 1868 struct rtl_priv *rtlpriv = rtl_priv(hw); 1869 struct rtl_phy *rtlphy = &(rtlpriv->phy); 1870 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1871 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1872 u32 ratr_value; 1873 u8 ratr_index = 0; 1874 u8 nmode = mac->ht_enable; 1875 u8 mimo_ps = IEEE80211_SMPS_OFF; 1876 u16 shortgi_rate; 1877 u32 tmp_ratr_value; 1878 u8 curtxbw_40mhz = mac->bw_40; 1879 u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1880 1 : 0; 1881 u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1882 1 : 0; 1883 enum wireless_mode wirelessmode = mac->mode; 1884 1885 if (rtlhal->current_bandtype == BAND_ON_5G) 1886 ratr_value = sta->supp_rates[1] << 4; 1887 else 1888 ratr_value = sta->supp_rates[0]; 1889 ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | 1890 sta->ht_cap.mcs.rx_mask[0] << 12); 1891 switch (wirelessmode) { 1892 case WIRELESS_MODE_A: 1893 ratr_value &= 0x00000FF0; 1894 break; 1895 case WIRELESS_MODE_B: 1896 if (ratr_value & 0x0000000c) 1897 ratr_value &= 0x0000000d; 1898 else 1899 ratr_value &= 0x0000000f; 1900 break; 1901 case WIRELESS_MODE_G: 1902 ratr_value &= 0x00000FF5; 1903 break; 1904 case WIRELESS_MODE_N_24G: 1905 case WIRELESS_MODE_N_5G: 1906 nmode = 1; 1907 if (mimo_ps == IEEE80211_SMPS_STATIC) { 1908 ratr_value &= 0x0007F005; 1909 } else { 1910 u32 ratr_mask; 1911 1912 if (get_rf_type(rtlphy) == RF_1T2R || 1913 get_rf_type(rtlphy) == RF_1T1R) { 1914 ratr_mask = 0x000ff005; 1915 } else { 1916 ratr_mask = 0x0f0ff005; 1917 } 1918 1919 ratr_value &= ratr_mask; 1920 } 1921 break; 1922 default: 1923 if (rtlphy->rf_type == RF_1T2R) 1924 ratr_value &= 0x000ff0ff; 1925 else 1926 ratr_value &= 0x0f0ff0ff; 1927 1928 break; 1929 } 1930 ratr_value &= 0x0FFFFFFF; 1931 if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || 1932 (!curtxbw_40mhz && curshortgi_20mhz))) { 1933 ratr_value |= 0x10000000; 1934 tmp_ratr_value = (ratr_value >> 12); 1935 for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { 1936 if ((1 << shortgi_rate) & tmp_ratr_value) 1937 break; 1938 } 1939 shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | 1940 (shortgi_rate << 4) | (shortgi_rate); 1941 } 1942 rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); 1943 RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", 1944 rtl_read_dword(rtlpriv, REG_ARFR0)); 1945} 1946 1947static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, 1948 struct ieee80211_sta *sta, u8 rssi_level) 1949{ 1950 struct rtl_priv *rtlpriv = rtl_priv(hw); 1951 struct rtl_phy *rtlphy = &(rtlpriv->phy); 1952 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1953 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1954 struct rtl_sta_info *sta_entry = NULL; 1955 u32 ratr_bitmap; 1956 u8 ratr_index; 1957 u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; 1958 u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1959 1 : 0; 1960 u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1961 1 : 0; 1962 enum wireless_mode wirelessmode = 0; 1963 bool shortgi = false; 1964 u32 value[2]; 1965 u8 macid = 0; 1966 u8 mimo_ps = IEEE80211_SMPS_OFF; 1967 1968 sta_entry = (struct rtl_sta_info *) sta->drv_priv; 1969 mimo_ps = sta_entry->mimo_ps; 1970 wirelessmode = sta_entry->wireless_mode; 1971 if (mac->opmode == NL80211_IFTYPE_STATION) 1972 curtxbw_40mhz = mac->bw_40; 1973 else if (mac->opmode == NL80211_IFTYPE_AP || 1974 mac->opmode == NL80211_IFTYPE_ADHOC) 1975 macid = sta->aid + 1; 1976 1977 if (rtlhal->current_bandtype == BAND_ON_5G) 1978 ratr_bitmap = sta->supp_rates[1] << 4; 1979 else 1980 ratr_bitmap = sta->supp_rates[0]; 1981 ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | 1982 sta->ht_cap.mcs.rx_mask[0] << 12); 1983 switch (wirelessmode) { 1984 case WIRELESS_MODE_B: 1985 ratr_index = RATR_INX_WIRELESS_B; 1986 if (ratr_bitmap & 0x0000000c) 1987 ratr_bitmap &= 0x0000000d; 1988 else 1989 ratr_bitmap &= 0x0000000f; 1990 break; 1991 case WIRELESS_MODE_G: 1992 ratr_index = RATR_INX_WIRELESS_GB; 1993 1994 if (rssi_level == 1) 1995 ratr_bitmap &= 0x00000f00; 1996 else if (rssi_level == 2) 1997 ratr_bitmap &= 0x00000ff0; 1998 else 1999 ratr_bitmap &= 0x00000ff5; 2000 break; 2001 case WIRELESS_MODE_A: 2002 ratr_index = RATR_INX_WIRELESS_G; 2003 ratr_bitmap &= 0x00000ff0; 2004 break; 2005 case WIRELESS_MODE_N_24G: 2006 case WIRELESS_MODE_N_5G: 2007 if (wirelessmode == WIRELESS_MODE_N_24G) 2008 ratr_index = RATR_INX_WIRELESS_NGB; 2009 else 2010 ratr_index = RATR_INX_WIRELESS_NG; 2011 if (mimo_ps == IEEE80211_SMPS_STATIC) { 2012 if (rssi_level == 1) 2013 ratr_bitmap &= 0x00070000; 2014 else if (rssi_level == 2) 2015 ratr_bitmap &= 0x0007f000; 2016 else 2017 ratr_bitmap &= 0x0007f005; 2018 } else { 2019 if (rtlphy->rf_type == RF_1T2R || 2020 rtlphy->rf_type == RF_1T1R) { 2021 if (curtxbw_40mhz) { 2022 if (rssi_level == 1) 2023 ratr_bitmap &= 0x000f0000; 2024 else if (rssi_level == 2) 2025 ratr_bitmap &= 0x000ff000; 2026 else 2027 ratr_bitmap &= 0x000ff015; 2028 } else { 2029 if (rssi_level == 1) 2030 ratr_bitmap &= 0x000f0000; 2031 else if (rssi_level == 2) 2032 ratr_bitmap &= 0x000ff000; 2033 else 2034 ratr_bitmap &= 0x000ff005; 2035 } 2036 } else { 2037 if (curtxbw_40mhz) { 2038 if (rssi_level == 1) 2039 ratr_bitmap &= 0x0f0f0000; 2040 else if (rssi_level == 2) 2041 ratr_bitmap &= 0x0f0ff000; 2042 else 2043 ratr_bitmap &= 0x0f0ff015; 2044 } else { 2045 if (rssi_level == 1) 2046 ratr_bitmap &= 0x0f0f0000; 2047 else if (rssi_level == 2) 2048 ratr_bitmap &= 0x0f0ff000; 2049 else 2050 ratr_bitmap &= 0x0f0ff005; 2051 } 2052 } 2053 } 2054 if ((curtxbw_40mhz && curshortgi_40mhz) || 2055 (!curtxbw_40mhz && curshortgi_20mhz)) { 2056 2057 if (macid == 0) 2058 shortgi = true; 2059 else if (macid == 1) 2060 shortgi = false; 2061 } 2062 break; 2063 default: 2064 ratr_index = RATR_INX_WIRELESS_NGB; 2065 2066 if (rtlphy->rf_type == RF_1T2R) 2067 ratr_bitmap &= 0x000ff0ff; 2068 else 2069 ratr_bitmap &= 0x0f0ff0ff; 2070 break; 2071 } 2072 2073 value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28); 2074 value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80; 2075 RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, 2076 "ratr_bitmap :%x value0:%x value1:%x\n", 2077 ratr_bitmap, value[0], value[1]); 2078 rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value); 2079 if (macid != 0) 2080 sta_entry->ratr_index = ratr_index; 2081} 2082 2083void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw, 2084 struct ieee80211_sta *sta, u8 rssi_level) 2085{ 2086 struct rtl_priv *rtlpriv = rtl_priv(hw); 2087 2088 if (rtlpriv->dm.useramask) 2089 rtl92de_update_hal_rate_mask(hw, sta, rssi_level); 2090 else 2091 rtl92de_update_hal_rate_table(hw, sta); 2092} 2093 2094void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw) 2095{ 2096 struct rtl_priv *rtlpriv = rtl_priv(hw); 2097 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 2098 u16 sifs_timer; 2099 2100 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, 2101 &mac->slot_time); 2102 if (!mac->ht_enable) 2103 sifs_timer = 0x0a0a; 2104 else 2105 sifs_timer = 0x1010; 2106 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); 2107} 2108 2109bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) 2110{ 2111 struct rtl_priv *rtlpriv = rtl_priv(hw); 2112 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 2113 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 2114 enum rf_pwrstate e_rfpowerstate_toset; 2115 u8 u1tmp; 2116 bool actuallyset = false; 2117 unsigned long flag; 2118 2119 if (rtlpci->being_init_adapter) 2120 return false; 2121 if (ppsc->swrf_processing) 2122 return false; 2123 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); 2124 if (ppsc->rfchange_inprogress) { 2125 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2126 return false; 2127 } else { 2128 ppsc->rfchange_inprogress = true; 2129 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2130 } 2131 rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv, 2132 REG_MAC_PINMUX_CFG) & ~(BIT(3))); 2133 u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL); 2134 e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF; 2135 if (ppsc->hwradiooff && (e_rfpowerstate_toset == ERFON)) { 2136 RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, 2137 "GPIOChangeRF - HW Radio ON, RF ON\n"); 2138 e_rfpowerstate_toset = ERFON; 2139 ppsc->hwradiooff = false; 2140 actuallyset = true; 2141 } else if (!ppsc->hwradiooff && (e_rfpowerstate_toset == ERFOFF)) { 2142 RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, 2143 "GPIOChangeRF - HW Radio OFF, RF OFF\n"); 2144 e_rfpowerstate_toset = ERFOFF; 2145 ppsc->hwradiooff = true; 2146 actuallyset = true; 2147 } 2148 if (actuallyset) { 2149 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); 2150 ppsc->rfchange_inprogress = false; 2151 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2152 } else { 2153 if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) 2154 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); 2155 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); 2156 ppsc->rfchange_inprogress = false; 2157 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2158 } 2159 *valid = 1; 2160 return !ppsc->hwradiooff; 2161} 2162 2163void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index, 2164 u8 *p_macaddr, bool is_group, u8 enc_algo, 2165 bool is_wepkey, bool clear_all) 2166{ 2167 struct rtl_priv *rtlpriv = rtl_priv(hw); 2168 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 2169 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 2170 u8 *macaddr = p_macaddr; 2171 u32 entry_id; 2172 bool is_pairwise = false; 2173 static u8 cam_const_addr[4][6] = { 2174 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, 2175 {0x00, 0x00, 0x00, 0x00, 0x00, 0x01}, 2176 {0x00, 0x00, 0x00, 0x00, 0x00, 0x02}, 2177 {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} 2178 }; 2179 static u8 cam_const_broad[] = { 2180 0xff, 0xff, 0xff, 0xff, 0xff, 0xff 2181 }; 2182 2183 if (clear_all) { 2184 u8 idx; 2185 u8 cam_offset = 0; 2186 u8 clear_number = 5; 2187 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n"); 2188 for (idx = 0; idx < clear_number; idx++) { 2189 rtl_cam_mark_invalid(hw, cam_offset + idx); 2190 rtl_cam_empty_entry(hw, cam_offset + idx); 2191 2192 if (idx < 5) { 2193 memset(rtlpriv->sec.key_buf[idx], 0, 2194 MAX_KEY_LEN); 2195 rtlpriv->sec.key_len[idx] = 0; 2196 } 2197 } 2198 } else { 2199 switch (enc_algo) { 2200 case WEP40_ENCRYPTION: 2201 enc_algo = CAM_WEP40; 2202 break; 2203 case WEP104_ENCRYPTION: 2204 enc_algo = CAM_WEP104; 2205 break; 2206 case TKIP_ENCRYPTION: 2207 enc_algo = CAM_TKIP; 2208 break; 2209 case AESCCMP_ENCRYPTION: 2210 enc_algo = CAM_AES; 2211 break; 2212 default: 2213 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, 2214 "switch case not processed\n"); 2215 enc_algo = CAM_TKIP; 2216 break; 2217 } 2218 if (is_wepkey || rtlpriv->sec.use_defaultkey) { 2219 macaddr = cam_const_addr[key_index]; 2220 entry_id = key_index; 2221 } else { 2222 if (is_group) { 2223 macaddr = cam_const_broad; 2224 entry_id = key_index; 2225 } else { 2226 if (mac->opmode == NL80211_IFTYPE_AP) { 2227 entry_id = rtl_cam_get_free_entry(hw, 2228 p_macaddr); 2229 if (entry_id >= TOTAL_CAM_ENTRY) { 2230 RT_TRACE(rtlpriv, COMP_SEC, 2231 DBG_EMERG, 2232 "Can not find free hw security cam entry\n"); 2233 return; 2234 } 2235 } else { 2236 entry_id = CAM_PAIRWISE_KEY_POSITION; 2237 } 2238 key_index = PAIRWISE_KEYIDX; 2239 is_pairwise = true; 2240 } 2241 } 2242 if (rtlpriv->sec.key_len[key_index] == 0) { 2243 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, 2244 "delete one entry, entry_id is %d\n", 2245 entry_id); 2246 if (mac->opmode == NL80211_IFTYPE_AP) 2247 rtl_cam_del_entry(hw, p_macaddr); 2248 rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); 2249 } else { 2250 RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, 2251 "The insert KEY length is %d\n", 2252 rtlpriv->sec.key_len[PAIRWISE_KEYIDX]); 2253 RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, 2254 "The insert KEY is %x %x\n", 2255 rtlpriv->sec.key_buf[0][0], 2256 rtlpriv->sec.key_buf[0][1]); 2257 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, 2258 "add one entry\n"); 2259 if (is_pairwise) { 2260 RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD, 2261 "Pairwise Key content", 2262 rtlpriv->sec.pairwise_key, 2263 rtlpriv-> 2264 sec.key_len[PAIRWISE_KEYIDX]); 2265 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, 2266 "set Pairwise key\n"); 2267 rtl_cam_add_one_entry(hw, macaddr, key_index, 2268 entry_id, enc_algo, 2269 CAM_CONFIG_NO_USEDK, 2270 rtlpriv-> 2271 sec.key_buf[key_index]); 2272 } else { 2273 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, 2274 "set group key\n"); 2275 if (mac->opmode == NL80211_IFTYPE_ADHOC) { 2276 rtl_cam_add_one_entry(hw, 2277 rtlefuse->dev_addr, 2278 PAIRWISE_KEYIDX, 2279 CAM_PAIRWISE_KEY_POSITION, 2280 enc_algo, CAM_CONFIG_NO_USEDK, 2281 rtlpriv->sec.key_buf[entry_id]); 2282 } 2283 rtl_cam_add_one_entry(hw, macaddr, key_index, 2284 entry_id, enc_algo, 2285 CAM_CONFIG_NO_USEDK, 2286 rtlpriv->sec.key_buf 2287 [entry_id]); 2288 } 2289 } 2290 } 2291} 2292 2293void rtl92de_suspend(struct ieee80211_hw *hw) 2294{ 2295 struct rtl_priv *rtlpriv = rtl_priv(hw); 2296 2297 rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv, 2298 REG_MAC_PHY_CTRL_NORMAL); 2299} 2300 2301void rtl92de_resume(struct ieee80211_hw *hw) 2302{ 2303 struct rtl_priv *rtlpriv = rtl_priv(hw); 2304 2305 rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL, 2306 rtlpriv->rtlhal.macphyctl_reg); 2307} 2308