Searched refs:acknowledge (Results 1 - 200 of 295) sorted by relevance

12

/linux-4.4.14/drivers/isdn/hardware/eicon/
H A Dxdi_msg.h12 As acknowledge one DWORD - card ordinal will be read from the card
17 no acknowledge will be generated, memory block will be written in the
23 no acknowledge will be genatated, FPGA will be programmed
28 As acknowledge block of SDRAM will be read in the user buffer
33 As acknowledge dword with serial number will be read in the user buffer
38 As acknowledge struct consisting from 9 dwords with PCI info.
H A Ds_4bri.c325 DBG_FTL(("FPGA download: acknowledge for FPGA memory clear missing")) qBri_FPGA_download()
H A Dpc.h181 #define FAC_REG_ACK 19 /* 1TR6 fac registration acknowledge */
/linux-4.4.14/arch/mips/include/asm/
H A Di8259.h48 * cases where no better interrupt acknowledge method is available and we
57 /* Perform an interrupt acknowledge cycle on controller 1. */ i8259_irq()
63 * acknowledge on controller 2. i8259_irq()
H A Djazz.h258 #define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */
H A Dsni.h191 /* PCI EISA Interrupt acknowledge */
/linux-4.4.14/include/video/
H A Dpmag-ba-fb.h18 #define PMAG_BA_IRQ 0x300000 /* IRQ acknowledge */
/linux-4.4.14/arch/metag/tbx/
H A Dtbidefr.S63 * the mask to acknowledge the exception
65 * D1Re0 -- The bits to acknowledge
86 XOR D1Re0, D1Re0, #-1 /* Prepare mask for acknowledge (avoids stall) */
126 * the mask to acknowledge the exception
136 * D1Re0 -- The bits to acknowledge
/linux-4.4.14/arch/powerpc/platforms/amigaone/
H A Dsetup.c97 /* Look for interrupt acknowledge address in the PCI root node. */ amigaone_init_IRQ()
100 prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); amigaone_init_IRQ()
107 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" amigaone_init_IRQ()
/linux-4.4.14/arch/cris/include/arch-v32/arch/
H A Dirq.h78 * which will acknowledge the interrupt, is run. The actual blocking is made
107 * timer irq handler is run to acknowledge the interrupt.
/linux-4.4.14/arch/arm/mach-netx/
H A Dtime.c98 /* acknowledge interrupt */ netx_timer_interrupt()
125 /* acknowledge interrupt */ netx_timer_init()
/linux-4.4.14/arch/powerpc/platforms/chrp/
H A Dgg2.h27 #define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */
H A Dsetup.c498 "8259-interrupt-acknowledge", NULL); chrp_find_8259()
507 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" chrp_find_8259()
/linux-4.4.14/arch/powerpc/sysdev/
H A Di8259.c31 * acknowledge feature or poll. How i8259_init() is called determines
47 /* Perform an interrupt acknowledge cycle on controller 1. */ i8259_irq()
53 * acknowledge on controller 2. i8259_irq()
224 * @intack_addr: PCI interrupt acknowledge (real) address which will return
H A Dfsl_gtm.c322 * gtm_ack_timer16 - acknowledge timer event (free-run timers only)
327 * Thus function used to acknowledge timer interrupt event, use it inside the
/linux-4.4.14/Documentation/blackfin/
H A Dgptimers-example.c45 /* acknowledge the interrupt */ gptimer_example_irq()
/linux-4.4.14/include/linux/
H A Dvirtio_mmio.h107 /* Interrupt acknowledge - Write Only */
135 * Interrupt flags (re: interrupt status & acknowledge registers)
H A Dsctp.h333 * The INIT ACK chunk is used to acknowledge the initiation of an SCTP
355 * This chunk is sent to the peer endpoint to acknowledge received DATA
/linux-4.4.14/drivers/reset/sti/
H A Dreset-syscfg.h24 * @ack: Regmap field description of the channel's acknowledge bit.
/linux-4.4.14/arch/blackfin/kernel/
H A Dipipe.c112 if (!m_ack && idesc->acknowledge != NULL) __ipipe_handle_irq()
113 idesc->acknowledge(irq, irq_to_desc(irq)); __ipipe_handle_irq()
130 if (!m_ack && idesc->acknowledge != NULL) { __ipipe_handle_irq()
131 idesc->acknowledge(irq, irq_to_desc(irq)); __ipipe_handle_irq()
/linux-4.4.14/arch/mips/sni/
H A Drm200.c292 * cases where no better interrupt acknowledge method is available and we
301 /* Perform an interrupt acknowledge cycle on controller 1. */ sni_rm200_i8259_irq()
307 * acknowledge on controller 2. sni_rm200_i8259_irq()
H A Dpcimt.c241 * Note: ASIC PCI's builtin interrupt acknowledge feature is pcimt_hwint1()
/linux-4.4.14/drivers/ide/
H A Dgayle.c58 * Check and acknowledge the interrupt status
H A Dbuddha.c100 * Check and acknowledge the interrupt status
/linux-4.4.14/drivers/bluetooth/
H A Dhci_ll.c219 /* acknowledge device wake up */ ll_device_want_to_wakeup()
221 BT_ERR("cannot acknowledge device wake up"); ll_device_want_to_wakeup()
258 /* acknowledge device sleep */ ll_device_want_to_sleep()
260 BT_ERR("cannot acknowledge device sleep"); ll_device_want_to_sleep()
H A Dhci_qca.c268 /* Always acknowledge device wake up, qca_wq_awake_rx()
272 BT_ERR("Failed to acknowledge device wake up"); qca_wq_awake_rx()
363 BT_ERR("Failed to acknowledge device wake up"); hci_ibs_wake_retrans_timeout()
564 /* Always acknowledge device wake up, device_want_to_wakeup()
568 BT_ERR("Failed to acknowledge device wake up"); device_want_to_wakeup()
/linux-4.4.14/arch/alpha/kernel/
H A Dirq_i8259.c127 * Generate a PCI interrupt acknowledge cycle. The PIC will isa_device_interrupt()
H A Derr_titan.c214 * to acknowledge the error. If this timing happens, a second titan_parse_p_perror()
/linux-4.4.14/include/uapi/linux/
H A Dvt.h30 #define VT_ACKACQ 0x02 /* acknowledge switch */
H A Dmei.h123 * the ioctl has to be called in order to acknowledge pending event
H A Dvirtio_pci.h69 * a read-and-acknowledge. */
/linux-4.4.14/arch/powerpc/platforms/52xx/
H A Dmpc52xx_sleep.S136 /* acknowledge wakeup, so CCS releases power pown */
/linux-4.4.14/arch/m68k/amiga/
H A Damiints.c130 /* acknowledge of IF_RBF must be done by the serial interrupt */ ami_int5()
/linux-4.4.14/sound/pci/au88x0/
H A Dau88x0_mpu401.c76 dev_err(vortex->card->dev, "midi port doesn't acknowledge!\n"); snd_vortex_midi()
/linux-4.4.14/drivers/usb/renesas_usbhs/
H A Dmod.c260 #define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */
261 #define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */ usbhs_interrupt()
/linux-4.4.14/drivers/isdn/pcbit/
H A Dedss1.c155 {EV_NET_SETUP_ACK, "NET->TE: setup acknowledge (more info needed)"},
157 {EV_NET_CONN_ACK, "NET->TE: connect acknowledge"},
/linux-4.4.14/drivers/connector/
H A Dconnector.c50 * and random acknowledge numbers. Sequence number may be copied into
57 * acknowledge number MUST be the same + 1.
/linux-4.4.14/arch/cris/include/arch-v10/arch/
H A Dirq.h117 * will acknowledge the interrupt is run.
146 * timer irq handler is run to acknowledge the interrupt.
/linux-4.4.14/arch/powerpc/platforms/powernv/
H A Dopal-elog.c71 return sprintf(buf, "ack - acknowledge log message\n"); elog_ack_show()
90 __ATTR(acknowledge, 0660, elog_ack_show, elog_ack_store);
H A Dopal-dump.c73 return sprintf(buf, "ack - acknowledge dump\n"); dump_ack_show()
110 __ATTR(acknowledge, 0660, dump_ack_show, dump_ack_store);
/linux-4.4.14/arch/arm/mach-realview/include/mach/
H A Dplatform.h152 * - used to acknowledge and control MMCI and UART interrupts
157 /* write 1 to acknowledge and clear */
/linux-4.4.14/net/nfc/nci/
H A Dspi.c158 static int send_acknowledge(struct nci_spi *nspi, u8 acknowledge) send_acknowledge() argument
171 hdr[2] = acknowledge << NCI_SPI_ACK_SHIFT; send_acknowledge()
/linux-4.4.14/drivers/misc/mic/bus/
H A Dscif_bus.h87 * @ack_interrupt: acknowledge an interrupt in the ISR.
/linux-4.4.14/drivers/media/radio/
H A Dradio-trust.c100 /* acknowledge bit */ write_i2c()
/linux-4.4.14/arch/x86/include/asm/uv/
H A Duv_bau.h300 unsigned int swack_flag:1; /* software acknowledge flag */
304 software acknowledge */
364 unsigned int swack_flag:1; /* software acknowledge flag */
430 * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
/linux-4.4.14/scripts/gdb/linux/
H A Dsymbols.py38 # get stuck waiting for the user to acknowledge paged output.
/linux-4.4.14/include/net/
H A Dlapb.h24 #define LAPB_UA 0x63 /* Unnumbered acknowledge */
H A Dllc_conn.h66 the P-bit of acknowledge */
H A Dslhc_vj.h15 * distribution and use acknowledge that the software was developed
H A Dax25.h81 #define AX25_UA 0x63 /* Unnumbered acknowledge */
/linux-4.4.14/arch/powerpc/platforms/embedded6xx/
H A Dmvme5100.c94 prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); mvme5100_pic_init()
/linux-4.4.14/arch/sh/boards/mach-dreamcast/
H A Dirq.c26 * is set, and that bit should be rewritten to the ESR to acknowledge that
/linux-4.4.14/arch/sh/include/mach-sdk7786/mach/
H A Dfpga.h77 #define PWRCR_PDWNACK BIT(5) /* Power down acknowledge */
/linux-4.4.14/arch/sparc/include/asm/
H A Diommu_32.h60 #define IOMMU_AFSR_BE 0x10000000 /* Write access received error acknowledge */
/linux-4.4.14/arch/m68k/coldfire/
H A Dintc-5272.c36 * they also need acknowledging via acknowledge bits.
/linux-4.4.14/arch/arm/mach-lpc32xx/
H A Dsuspend.S73 @ Wait for self-refresh acknowledge, clocks to the DRAM device
/linux-4.4.14/drivers/rtc/
H A Drtc-mpc5121.c251 /* acknowledge and clear status */ mpc5121_rtc_handler()
268 /* acknowledge */ mpc5121_rtc_handler_upd()
/linux-4.4.14/drivers/media/pci/saa7134/
H A Dsaa7134-i2c.c75 NO_DEVICE = 9, // no acknowledge on device slave address
76 NO_ACKN = 10, // no acknowledge after data byte transfer
/linux-4.4.14/arch/arm/mach-versatile/include/mach/
H A Dplatform.h176 * - used to acknowledge and control MMCI and UART interrupts
181 /* write 1 to acknowledge and clear */
/linux-4.4.14/net/llc/
H A Dllc_c_ac.c898 * llc_conn_ac_send_i_rsp_f_set_ackpf - acknowledge received PDUs
902 * Sends an I response PDU with f-bit set to ack_pf flag as acknowledge to
926 * llc_conn_ac_send_i_as_ack - sends an I-format PDU to acknowledge rx PDUs
930 * This action sends an I-format PDU as acknowledge to received PDUs which
954 * acknowledge to all received PDUs which have not been acknowledged, yet,
/linux-4.4.14/drivers/i2c/busses/
H A Di2c-pnx.c304 /* Last byte, do not acknowledge next rcv. */ i2c_pnx_master_rcv()
389 /* Slave did not acknowledge, generate a STOP */ i2c_pnx_interrupt()
391 "%s(): Slave did not acknowledge, generating a STOP.\n", i2c_pnx_interrupt()
H A Di2c-at91.c560 * Whenever the slave doesn't acknowledge a byte, the LOCK, NACK and at91_do_twi_transfer()
H A Di2c-nomadik.c168 * @xfer_complete: acknowledge completion for a I2C message.
H A Di2c-sh_mobile.c711 /* handle missing acknowledge and arbitration lost */ poll_busy()
H A Di2c-stu300.c145 * @cmd_complete: acknowledge completion for an I2C command
/linux-4.4.14/drivers/misc/c2port/
H A Dcore.c562 /* Wait for input acknowledge */ __c2port_write_flash_erase()
655 /* Wait for input acknowledge */ __c2port_read_flash_data()
766 /* Wait for input acknowledge */ __c2port_write_flash_data()
/linux-4.4.14/drivers/char/
H A Dapm-emulation.c260 * - acknowledge a suspend read from /dev/apm_bios.
262 * has acknowledge does the actual suspend happen.
284 * interpreted as an acknowledge. apm_ioctl()
/linux-4.4.14/drivers/usb/musb/
H A Dblackfin.c119 /* acknowledge dma interrupt */ bfin_write_fifo()
173 /* acknowledge dma interrupt */ bfin_read_fifo()
H A Dmusb_gadget_ep0.c689 /* I sent a stall.. need to acknowledge it now.. */ musb_g_ep0_irq()
/linux-4.4.14/drivers/net/wireless/ti/wl12xx/
H A Dreg.h138 register to clear (acknowledge) the corresp.
503 * sets this bit to acknowledge that it received
/linux-4.4.14/drivers/clocksource/
H A Dsh_tmu.c220 /* acknowledge interrupt */ sh_tmu_set_next()
242 /* disable or acknowledge interrupt */ sh_tmu_interrupt()
H A Dsh_mtu2.c265 /* acknowledge interrupt */ sh_mtu2_interrupt()
/linux-4.4.14/net/tipc/
H A Dbcast.c133 * drop and never acknowledge the unexpected packets, and missing destinations
246 /* tipc_bcast_ack_rcv - receive and handle a broadcast acknowledge
/linux-4.4.14/drivers/uio/
H A Duio_dmem_genirq.c256 * for performing hardware specific acknowledge and re-enabling of uio_dmem_genirq_probe()
H A Duio_pdrv_genirq.c189 * for performing hardware specific acknowledge and re-enabling of uio_pdrv_genirq_probe()
/linux-4.4.14/drivers/pwm/
H A Dpwm-tiecap.c274 * Due to hardware misbehaviour, acknowledge of the stop_req ecap_pwm_remove()
H A Dpwm-tiehrpwm.c521 * Due to hardware misbehaviour, acknowledge of the stop_req ehrpwm_pwm_remove()
/linux-4.4.14/drivers/isdn/hisax/
H A Djade.c66 /* Got acknowledge */ jade_write_indirect()
/linux-4.4.14/drivers/isdn/hysdn/
H A Dhysdn_sched.c82 hysdn_tx_netack(card); /* acknowledge packet send */ hysdn_sched_tx()
H A Dhysdn_defs.h264 extern void hysdn_tx_netack(hysdn_card *); /* acknowledge a packet tx */
H A Dhycapi.c628 Internally acknowledge a msg sent. This will remove the msg from the
/linux-4.4.14/drivers/net/arcnet/
H A Dcapmode.c212 ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ ack_tx()
H A Darcdevice.h173 #define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */
H A Darcnet.c640 /* done right away and we don't want to acknowledge arcnet_send_packet()
/linux-4.4.14/drivers/hid/
H A Dhid-elo.c166 dev_err(&dev->dev, "get acknowledge response failed, error %d\n", elo_work()
/linux-4.4.14/drivers/media/pci/cobalt/
H A Dcobalt-i2c.c74 /* Receive acknowledge from slave */
/linux-4.4.14/drivers/input/serio/
H A Dlibps2.c30 * ps2_sendbyte() sends a byte to the device and waits for acknowledge.
H A Dolpc_apsp.c117 * Write 1 to PJ_RST_INTERRUPT to acknowledge and clear the interrupt olpc_apsp_rx()
/linux-4.4.14/drivers/input/touchscreen/
H A Dmigor_ts.c57 * the interrupt line we need to acknowledge the interrupt by migor_ts_isr()
/linux-4.4.14/drivers/net/wireless/ti/wl18xx/
H A Dreg.h185 * sets this bit to acknowledge that it received
/linux-4.4.14/arch/tile/lib/
H A Dcacheflush.c79 * Wait for the home cache to acknowledge that it has processed finv_buffer_remote()
/linux-4.4.14/arch/cris/arch-v10/kernel/
H A Dtime.c143 /* acknowledge the timer irq */ timer_interrupt()
/linux-4.4.14/arch/m68k/emu/
H A Dnfeth.c27 XIF_IRQ, /* acknowledge interrupt from host */
/linux-4.4.14/arch/arm/kernel/
H A Dsmp_twd.c82 * If a local timer interrupt has occurred, acknowledge and return 1.
/linux-4.4.14/net/rose/
H A Drose_in.c189 * acknowledge hold back timer. rose_state3_machine()
/linux-4.4.14/drivers/xen/
H A Dmanage.c246 /* Only acknowledge commands which we are prepared to handle. */ shutdown_handler()
/linux-4.4.14/arch/powerpc/kernel/
H A Dprom_init.c1665 unsigned long *acknowledge prom_hold_cpus() local
1684 prom_debug(" 1) acknowledge = 0x%x\n", prom_hold_cpus()
1685 (unsigned long)acknowledge); prom_hold_cpus()
1686 prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge); prom_hold_cpus()
1717 /* Init the acknowledge var which will be reset by prom_hold_cpus()
1721 *acknowledge = (unsigned long)-1; prom_hold_cpus()
1730 (*acknowledge == ((unsigned long)-1)); i++ ) prom_hold_cpus()
1733 if (*acknowledge == cpu_no) prom_hold_cpus()
1736 prom_printf("failed: %x\n", *acknowledge); prom_hold_cpus()
/linux-4.4.14/drivers/mfd/
H A Dsi476x-cmd.c769 * command can be used to just acknowledge different interrupt si476x_core_cmd_am_rsq_status()
929 * used to just acknowledge different interrupt flags in those si476x_core_cmd_fm_rds_status()
1194 * command can be used to just acknowledge different interrupt si476x_core_cmd_fm_rsq_status_a10()
1248 * command can be used to just acknowledge different interrupt si476x_core_cmd_fm_rsq_status_a20()
1303 * command can be used to just acknowledge different interrupt si476x_core_cmd_fm_rsq_status_a30()
H A Dtwl4030-irq.c289 * thread. All we do here is acknowledge and mask the interrupt and wakeup
H A Ddb8500-prcmu.c372 * @ack: Reply ("acknowledge") data.
393 * @ack: Reply ("acknowledge") data.
431 * @ack: Reply ("acknowledge") data.
H A Dwm831x-core.c1898 * driver or no IRQ line wired up) then acknowledge the wm831x_device_suspend()
/linux-4.4.14/drivers/net/ethernet/broadcom/bnx2x/
H A Dbnx2x_reg.h178 acknowledge output is deasserted; all other signals are treated as usual;
181 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
203 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
207 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
240 acknowledge output is deasserted; all other signals are treated as usual;
256 acknowledge output is deasserted; all other signals are treated as usual;
308 acknowledge output is deasserted; all other signals are treated as usual;
333 disregarded; acknowledge output is deasserted; all other signals are
345 disregarded; acknowledge output is deasserted; all other signals are
356 disregarded; acknowledge output is deasserted; all other signals are
367 disregarded; acknowledge output is deasserted; all other signals are
778 /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
783 acknowledge input is disregarded; valid is deasserted; full is asserted;
1704 This will acknowledge an interrupt on the falling edge of corresponding
1707 register. This will acknowledge an interrupt on the rising edge of
1868 corresponding bit in the #OLD_VALUE register. This will acknowledge an
1871 in the #OLD_VALUE register. This will acknowledge an interrupt on the
3364 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
4461 disregarded; acknowledge output is deasserted; all other signals are
4510 acknowledge output is deasserted; all other signals are treated as usual;
4529 acknowledge output is deasserted; all other signals are treated as usual;
4545 disregarded; acknowledge output is deasserted; all other signals are
4553 acknowledge output is deasserted; all other signals are treated as usual;
4571 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4575 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4579 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4588 disregarded; acknowledge output is deasserted; all other signals are
4612 acknowledge output is deasserted; all other signals are treated as usual;
4616 acknowledge output is deasserted; all other signals are treated as usual;
4627 disregarded; acknowledge output is deasserted; all other signals are
4981 disregarded; acknowledge output is deasserted; all other signals are
4992 disregarded; acknowledge output is deasserted; all other signals are
5056 disregarded; acknowledge output is deasserted; all other signals are
5070 disregarded; acknowledge output is deasserted; all other signals are
5078 disregarded; acknowledge output is deasserted; all other signals are
5089 acknowledge output is deasserted; all other signals are treated as usual;
5107 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
5111 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
5116 disregarded; acknowledge output is deasserted; all other signals are
5119 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
5142 acknowledge output is deasserted; all other signals are treated as usual;
5146 acknowledge output is deasserted; all other signals are treated as usual;
5157 disregarded; acknowledge output is deasserted; all other signals are
5480 disregarded; acknowledge output is deasserted; all other signals are
5491 disregarded; acknowledge output is deasserted; all other signals are
5533 disregarded; acknowledge output is deasserted; all other signals are
5544 disregarded; acknowledge output is deasserted; all other signals are
5562 acknowledge output is deasserted; all other signals are treated as usual;
5584 disregarded; acknowledge output is deasserted; all other signals are
5598 disregarded; acknowledge output is deasserted; all other signals are
5602 disregarded; acknowledge output is deasserted; all other signals are
5615 disregarded; acknowledge output is deasserted; all other signals are
5638 acknowledge output is deasserted; all other signals are treated as usual;
5657 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
5661 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
5666 disregarded; acknowledge output is deasserted; all other signals are
5669 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
5694 acknowledge output is deasserted; all other signals are treated as usual;
5698 acknowledge output is deasserted; all other signals are treated as usual;
7113 bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
/linux-4.4.14/drivers/tty/serial/
H A Dmen_z135_uart.c244 * Copy from RX FIFO and acknowledge number of bytes copied.
275 /* Be sure to first copy all data and then acknowledge it */ men_z135_handle_rx()
/linux-4.4.14/drivers/ps3/
H A Dps3-sys-manager.c611 * then spins calling ps3_sys_manager_handle_msg() to receive and acknowledge
636 * then spins calling ps3_sys_manager_handle_msg() to receive and acknowledge
/linux-4.4.14/drivers/net/wireless/ti/wl1251/
H A Dreg.h188 register to clear (acknowledge) the corresp.
614 * sets this bit to acknowledge that it received
/linux-4.4.14/arch/powerpc/include/asm/
H A Depapr_hcalls.h391 * ev_int_iack - acknowledge an interrupt
398 * interrupt controller that is the target of the acknowledge.
/linux-4.4.14/drivers/watchdog/
H A Dpcwd_usb.c280 pr_err("Card did not acknowledge enable attempt\n"); usb_pcwd_start()
298 pr_err("Card did not acknowledge disable attempt\n"); usb_pcwd_stop()
H A Dcoh901327_wdt.c216 * just acknowledge, disable the interrupt and await the imminent end. coh901327_interrupt()
H A Dpcwd_pci.c300 pr_err("Card did not acknowledge disable attempt\n"); pcipcwd_stop()
/linux-4.4.14/drivers/irqchip/
H A Dirq-hip04.c92 * Routines to acknowledge, disable and enable interrupts
H A Dirq-metag.c119 * metag_internal_irq_ack - acknowledge irq
H A Dirq-gic.c169 * Routines to acknowledge, disable and enable interrupts
H A Dirq-metag-ext.c171 * meta_intc_ack_irq() - acknowledge an external irq
/linux-4.4.14/drivers/misc/mei/
H A Dinit.c214 /* acknowledge interrupt and stop interrupts */ mei_start()
H A Dhw-txe.c950 * single bit mask and acknowledge the interrupts
953 * @do_ack: acknowledge interrupts
1085 * Aliveness: Detection of SeC acknowledge of host request that mei_txe_irq_thread_handler()
/linux-4.4.14/drivers/media/dvb-frontends/
H A Ddibx000_common.c82 /* no acknowledge */ dibx000_is_i2c_done()
/linux-4.4.14/fs/afs/
H A Dvolume.c350 /* another server might acknowledge its existence */ afs_volume_release_fileserver()
/linux-4.4.14/include/linux/usb/
H A Dwusb.h102 * Used to acknowledge device connect requests. See note for
H A Dr8a66597.h336 #define SACK 0x0010 /* b4: Setup acknowledge interrupt */
/linux-4.4.14/arch/powerpc/platforms/85xx/
H A Dsmp.c304 /* clear the acknowledge status */ smp_85xx_kick_cpu()
/linux-4.4.14/arch/mips/jazz/
H A Djazzdma.c422 * read to ensure that the current DMA acknowledge cycle is completed. vdma_disable()
/linux-4.4.14/drivers/gpu/drm/amd/amdgpu/
H A Dcik_ih.c172 /* Wait and acknowledge irq */ cik_ih_irq_disable()
H A Dcz_ih.c174 /* Wait and acknowledge irq */ cz_ih_irq_disable()
H A Diceland_ih.c174 /* Wait and acknowledge irq */ iceland_ih_irq_disable()
H A Dtonga_ih.c182 /* Wait and acknowledge irq */ tonga_ih_irq_disable()
/linux-4.4.14/drivers/usb/serial/
H A Dkeyspan.h182 /* Input acknowledge endpoints */
/linux-4.4.14/drivers/staging/sm750fb/
H A Dddk750_swi2c.c307 * ack - Flag to indicate either to send the acknowledge
/linux-4.4.14/drivers/macintosh/
H A Dvia-cuda.c55 #define TACK 0x10 /* Transfer acknowledge (output) */
H A Dvia-maciisi.c44 #define TACK 0x10 /* Transfer acknowledge (output) */
H A Dvia-pmu68k.c66 #define TACK 0x02 /* Transfer acknowledge (input) */
/linux-4.4.14/drivers/media/common/saa7146/
H A Dsaa7146_i2c.c330 dvb cards don't acknowledge correctly, so the saa7146 saa7146_i2c_transfer()
/linux-4.4.14/drivers/media/usb/gspca/
H A Dsq905.c281 /* acknowledge the frame */ sq905_dostream()
/linux-4.4.14/drivers/misc/
H A Dioc4.c365 /* Clear (i.e. acknowledge) */ ioc4_probe()
/linux-4.4.14/drivers/ata/
H A Dahci_imx.c144 * In case we're resetting the phy, it's unable to acknowledge, imx_phy_reg_write()
H A Dsata_rcar.c87 /* Physical layer control acknowledge register (SATAPHYACK) bits */
/linux-4.4.14/arch/x86/kvm/
H A Di8259.c220 * acknowledge interrupt 'irq'
/linux-4.4.14/arch/x86/platform/uv/
H A Dtlb_uv.c188 * Free a software acknowledge hardware resource by clearing its Pending
1157 * same software acknowledge resource bit vector as the 'msg' message.
1212 * acknowledge it. Don't get the processing of sw_ack's process_uv2_message()
1221 * other message using this sw_ack, so it is safe to acknowledge it. process_uv2_message()
/linux-4.4.14/sound/aoa/soundbus/i2sbus/
H A Dcore.c99 /* acknowledge interrupt reasons */ i2sbus_bus_intr()
/linux-4.4.14/include/net/nfc/
H A Dnci_core.h386 /* ----- NCI over SPI acknowledge modes ----- */
/linux-4.4.14/sound/pcmcia/vx/
H A Dvxp_ops.c275 * vx_test_and_ack - test and acknowledge interrupt
/linux-4.4.14/drivers/virtio/
H A Dvirtio_pci_common.c79 /* A small wrapper to also acknowledge the interrupt when it's handled.
H A Dvirtio_mmio.c300 /* Read and acknowledge interrupts */ vm_interrupt()
/linux-4.4.14/drivers/scsi/
H A Dqla1280.h764 * ISP queue - notify acknowledge entry structure definition.
768 #define NOTIFY_ACK_TYPE 0xE /* Notify acknowledge entry. */
H A Dgdth.h741 u8 irqdel; /* acknowledge board int. */
762 u8 irqdel; /* acknowledge board int. */
/linux-4.4.14/drivers/scsi/qla2xxx/
H A Dqla_target.h200 #define NOTIFY_ACK_TYPE 0x0E /* Notify acknowledge entry. */
202 * ISP queue - notify acknowledge entry structure definition.
/linux-4.4.14/drivers/net/caif/
H A Dcaif_hsi.c797 /* Wait for acknowledge. */ cfhsi_wake_up()
914 /* Wait for acknowledge. */ cfhsi_wake_down()
/linux-4.4.14/drivers/net/can/
H A Dti_hecc.c112 #define HECC_CANTA 0x10 /* Transmission acknowledge */
113 #define HECC_CANAA 0x14 /* Abort acknowledge */
/linux-4.4.14/drivers/net/hyperv/
H A Dhyperv_net.h365 * This message is used by the VSP to acknowledge a receive buffer send by the
414 * This message is used by the VSP to acknowledge a send buffer sent by the
/linux-4.4.14/drivers/staging/unisys/include/
H A Diochannel.h105 NET_RCV_ENBDIS_ACK, /* acknowledge enable/disable packet
/linux-4.4.14/drivers/thunderbolt/
H A Dctl.c367 * tb_ctl_handle_plug_event() - acknowledge a plug event, invoke ctl->callback
/linux-4.4.14/drivers/spi/
H A Dspi-s3c24xx.c245 * Returns the bit to write to the interrupt acknowledge register.
/linux-4.4.14/drivers/staging/comedi/drivers/
H A Dcb_pcidas64.c1672 return 0; /* return fake acknowledge bit */ i2c_read_ack()
1715 /* get acknowledge */ i2c_write()
1717 dev_err(dev->class_dev, "failed: no acknowledge\n"); i2c_write()
1725 dev_err(dev->class_dev, "failed: no acknowledge\n"); i2c_write()
/linux-4.4.14/drivers/isdn/gigaset/
H A Di4l.c108 * gigaset_skb_sent() - acknowledge sending an skb
/linux-4.4.14/drivers/net/can/softing/
H A Dsofting_main.c293 /* acknowledge, was tx msg */ softing_handle_1()
/linux-4.4.14/drivers/i2c/algos/
H A Di2c-algo-bit.c209 /* acknowledge is sent in i2c_read. */ i2c_inb()
/linux-4.4.14/drivers/gpu/drm/shmobile/
H A Dshmob_drm_crtc.c630 /* Be careful not to acknowledge any pending interrupt. */ shmob_drm_crtc_enable_vblank()
/linux-4.4.14/drivers/media/i2c/
H A Dks0127.c305 * during the place where the acknowledge bit should be. Any standard
/linux-4.4.14/drivers/net/wireless/orinoco/
H A Dhermes.c231 obsolete event occurrence information. We have to acknowledge hermes_init()
/linux-4.4.14/drivers/net/wireless/iwlwifi/dvm/
H A Dtt.c488 * just set the GP1 bit to acknowledge the event
H A Dtx.c1280 * Handles block-acknowledge notification from device, which reports success
/linux-4.4.14/drivers/net/wireless/iwlwifi/mvm/
H A Dfw-api-tx.h409 * frames that used block-acknowledge. All frames were transmitted at
/linux-4.4.14/drivers/net/wireless/iwlwifi/pcie/
H A Dinternal.h464 /* acknowledge/clear/reset any interrupts still pending iwl_disable_interrupts()
/linux-4.4.14/drivers/net/slip/
H A Dslhc.c12 * distribution and use acknowledge that the software was developed
/linux-4.4.14/net/dccp/
H A Dinput.c67 * end is just waiting for the other to acknowledge termination. dccp_rcv_close()
/linux-4.4.14/arch/powerpc/platforms/cell/
H A Dspu_base.c374 /* acknowledge all interrupts before the callbacks */ spu_irq_class_2()
/linux-4.4.14/arch/powerpc/platforms/pseries/
H A Dsetup.c160 addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); pseries_setup_i8259_cascade()
/linux-4.4.14/arch/ia64/kernel/
H A Dmca_drv.c600 case 12: /* interrupt acknowledge or recover_from_platform_error()
/linux-4.4.14/drivers/net/cris/
H A Deth_v10.c1145 /* acknowledge the eop interrupt */ e100rxtx_interrupt()
1186 /* acknowledge the eop interrupt. */ e100rxtx_interrupt()
/linux-4.4.14/drivers/net/ethernet/smsc/
H A Dsmc9194.c541 /* acknowledge the interrupt */ smc_wait_to_send_packet()
1304 . branch off into routines to handle each case, and acknowledge
/linux-4.4.14/sound/core/
H A Drawmidi.c1139 * __snd_rawmidi_transmit_ack - acknowledge the transmission
1168 * snd_rawmidi_transmit_ack - acknowledge the transmission
/linux-4.4.14/drivers/s390/net/
H A Dnetiucv.c398 "Remote connection acknowledge",
435 * no acknowledge and no connection request received yet.
/linux-4.4.14/drivers/media/platform/soc_camera/
H A Dsh_mobile_ceu_camera.c274 #define CEU_CETCR_MAGIC 0x0317f313 /* acknowledge magical interrupt sources */
298 * the CEU_CETCR_MAGIC value. It seems like we need to acknowledge sh_mobile_ceu_capture()
/linux-4.4.14/drivers/net/ethernet/sfc/
H A Dfarch_regs.h93 /* INT_ACK_KER: Kernel interrupt acknowledge register */
2810 /* Interrupt acknowledge work-around register (A0/A1 only) */
H A Dfalcon.c415 * BIU. Interrupt acknowledge is read sensitive so must write instead
459 * register and acknowledge the device interrupt. falcon_legacy_interrupt_a1()
/linux-4.4.14/drivers/usb/isp1760/
H A Disp1760-udc.c197 * There's no data to be read from the FIFO, acknowledge the RX isp1760_udc_receive()
/linux-4.4.14/drivers/target/iscsi/
H A Discsi_target_login.c597 * to acknowledge commands for the failed connection. iscsi_login_post_auth_non_zero_tsih()
/linux-4.4.14/drivers/scsi/pm8001/
H A Dpm8001_hwi.h325 * use to acknowledge receive HW event (64 bytes)
/linux-4.4.14/drivers/staging/lustre/lnet/klnds/o2iblnd/
H A Do2iblnd.h443 #define IBLND_MSG_CONNACK 0xc1 /* connection acknowledge */
/linux-4.4.14/drivers/scsi/be2iscsi/
H A Dbe_cmds.h1338 #define DRIVERMSG_NOTIFY 31 /* TCP acknowledge based
/linux-4.4.14/drivers/net/can/m_can/
H A Dm_can.c409 /* acknowledge rx fifo 0 */ m_can_read_fifo()
/linux-4.4.14/drivers/gpu/drm/radeon/
H A Drs600.c758 /* Wait and acknowledge irq */ rs600_irq_disable()
/linux-4.4.14/drivers/net/wireless/libertas/
H A Dmain.c772 * If the device didn't even acknowledge the command, reset the state lbs_cmd_timeout_handler()
/linux-4.4.14/drivers/net/wireless/prism54/
H A Dislpci_dev.c502 /* The software reset acknowledge needs about 220 msec here. islpci_reset_if()
/linux-4.4.14/drivers/net/ethernet/intel/igb/
H A De1000_defines.h61 /* Interrupt acknowledge Auto-mask */
/linux-4.4.14/drivers/net/wireless/hostap/
H A Dhostap_wlan.h421 /* Events; EvStat, Interrupt mask (IntEn), and acknowledge bits (EvAck) */
/linux-4.4.14/drivers/parisc/
H A Ddino.c366 /* read and acknowledge pending interrupts */ dino_isr()
/linux-4.4.14/drivers/net/wireless/ath/ath9k/
H A Drecv.c34 * buffer (or rx fifo). This can incorrectly acknowledge packets
/linux-4.4.14/drivers/net/ethernet/amd/
H A Dau1000_eth.c920 * Called from the interrupt service routine to acknowledge
/linux-4.4.14/drivers/power/
H A Dtwl4030_charger.c493 /* Watch dog key: WOVF acknowledge */ twl4030_charger_enable_usb()
/linux-4.4.14/include/acpi/
H A Dactbl2.h1325 #define ACPI_WAET_RTC_NO_ACK (1) /* RTC requires no int acknowledge */
/linux-4.4.14/arch/arm/mach-omap2/
H A Domap_hwmod.h392 * functional clock, and can check whether they should acknowledge the
/linux-4.4.14/net/irda/
H A Dirlap.c683 * will acknowledge all the frames we have sent! So in that case we irlap_update_nr_received()
/linux-4.4.14/net/phonet/
H A Dpep.c1262 /* Dequeue and acknowledge control request */ pep_recvmsg()
/linux-4.4.14/sound/drivers/vx/
H A Dvx_pcm.c345 * and wait for a positive acknowledge (when there are vx_toggle_pipe()
/linux-4.4.14/sound/isa/
H A Dsscape.c508 * If all has gone well, then the board should acknowledge upload_dma_data()
/linux-4.4.14/sound/oss/
H A Dmpu401.c452 /* Dummy read (just to acknowledge the interrupt) */ mpuintr()
/linux-4.4.14/sound/pci/vx222/
H A Dvx222_ops.c443 * vx_test_and_ack - test and acknowledge interrupt
/linux-4.4.14/drivers/scsi/arm/
H A Dacornscsi.c2562 * and acknowledge the abort. Neither the devices nor the acornscsi_do_abort()
2572 * acknowledge the abort condition, and when the target acornscsi_do_abort()
H A Dfas216.c1071 * SCSI II standard says that we must not acknowledge fas216_parse_message()
2357 * and acknowledge the abort. Neither the device nor the fas216_find_command()
/linux-4.4.14/drivers/net/wan/
H A Dfarsync.c283 * set to 0xEE by host to acknowledge interrupt
1503 /* Set the software acknowledge */ fst_intr()

Completed in 7606 milliseconds

12