| /linux-4.4.14/Documentation/devicetree/bindings/usb/ |
| D | generic.txt | 13 OTG.
14 - otg-rev: tells usb driver the release number of the OTG and EH supplement
17 property is used if any real OTG features(HNP/SRP/ADP)
20 - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
21 is the basic function of real OTG except you want it
23 - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
24 optional for OTG device.
25 - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
26 optional for OTG device.
|
| D | samsung-hsotg.txt | 1 Samsung High Speed USB OTG controller
5 It gives functionality of OTG-compliant USB 2.0 host and device with
22 - first entry: OTG clock
|
| D | msm-hsusb.txt | 18 USB PHY with optional OTG:
26 - interrupts: interrupt-specifier for the OTG interrupt.
48 - qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
87 Example HSUSB OTG controller device node:
|
| D | omap-usb.txt | 14 - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
55 - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
|
| D | lpc32xx-udc.txt | 11 * External USB Transceiver Interrupt (OTG ATX)
|
| D | allwinner,sun4i-a10-musb.txt | 1 Allwinner sun4i A10 musb DRC/OTG controller
|
| D | dwc2.txt | 1 Platform DesignWare HS OTG USB 2.0 controller
|
| /linux-4.4.14/drivers/usb/phy/ |
| D | Kconfig | 17 Enable this to support the USB OTG transceiver in AB8500 chip.
22 bool "Freescale USB OTG Transceiver Driver"
26 Enable this to support Freescale USB OTG transceiver.
29 tristate "Philips ISP1301 with OMAP OTG"
35 USB-On-The-Go transceiver working with the OMAP OTG controller.
84 Enable this to support the USB OTG transceiver on TWL6030
86 and OTG SRP events capabilities. For all other transceiver functionality
102 tristate "OMAP USB OTG controller driver"
105 Enable this to support some transceivers on OMAP1 platforms. OTG
134 and OTG drivers (to be selected separately).
[all …]
|
| D | phy-isp1301-omap.c | 580 # define toggle(OTG,ISP) do { \ in otg_update_isp() argument
581 if (otg_ctrl & OTG) set |= ISP; \ in otg_update_isp()
|
| /linux-4.4.14/drivers/usb/core/ |
| D | Kconfig | 45 bool "OTG support"
49 The most notable feature of USB OTG is support for a
59 bool "Rely on OTG and EH Targeted Peripherals List"
65 USB OTG and EH specification for all devices not on your product's
74 external hubs. OTG hosts are allowed to reduce hardware
76 are "Embedded Hosts" that don't offer OTG support.
79 tristate "USB 2.0 OTG FSM implementation"
83 Implements OTG Finite State Machine as specified in On-The-Go
101 ULPI PHYs provide often functions such as ADP sensing/probing (OTG
|
| /linux-4.4.14/Documentation/devicetree/bindings/dma/ |
| D | ste-dma40.txt | 78 16: USB OTG in/out endpoints 7 & 15
79 17: USB OTG in/out endpoints 6 & 14
80 18: USB OTG in/out endpoints 5 & 13
81 19: USB OTG in/out endpoints 4 & 12
98 36: USB OTG in/out endpoints 3 & 11
99 37: USB OTG in/out endpoints 2 & 10
100 38: USB OTG in/out endpoints 1 & 9
101 39: USB OTG in/out endpoints 8
|
| /linux-4.4.14/arch/arm/mach-imx/devices/ |
| D | platform-mxc-ehci.c | 23 imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
32 imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
41 imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
|
| /linux-4.4.14/Documentation/ABI/stable/ |
| D | sysfs-class-udc | 6 Indicates if an OTG A-Host supports HNP at an alternate port.
14 Indicates if an OTG A-Host supports HNP at this port.
22 Indicates if an OTG A-Host enabled HNP support.
38 Indicates that this port is the default Host on an OTG session
47 Indicates that this port support OTG.
|
| /linux-4.4.14/Documentation/devicetree/bindings/phy/ |
| D | phy-lpc18xx-usb-otg.txt | 1 NXP LPC18xx/43xx internal USB OTG PHY binding
4 This file contains documentation for the internal USB OTG PHY found
|
| D | rockchip-usb-phy.txt | 17 "0x320" - for PHY attach to OTG controller
|
| /linux-4.4.14/Documentation/usb/ |
| D | chipidea.txt | 1 1. How to test OTG FSM(HNP and SRP)
3 To show how to demo OTG HNP and SRP functions via sys input files
6 1.1 How to enable OTG FSM in menuconfig
|
| /linux-4.4.14/Documentation/ABI/testing/ |
| D | sysfs-platform-tahvo-usb | 5 Set or read the current OTG mode. Valid values are "host" and
|
| /linux-4.4.14/arch/arm/mach-cns3xxx/ |
| D | Kconfig | 17 for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
|
| /linux-4.4.14/Documentation/arm/stm32/ |
| D | stm32f429-overview.txt | 11 - I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
|
| /linux-4.4.14/arch/arm/boot/dts/ |
| D | qcom-apq8064-cm-qs600.dts | 135 /* OTG */
161 /* OTG */
|
| D | qcom-apq8064-ifc6410.dts | 195 /* OTG */
221 /* OTG */
|
| D | sun4i-a10-gemei-g9.dts | 71 * OTG
|
| /linux-4.4.14/Documentation/devicetree/bindings/extcon/ |
| D | extcon-palmas.txt | 14 it performs id-detection using GPIO else using OTG core.
|
| /linux-4.4.14/drivers/phy/ |
| D | Kconfig | 58 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
63 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
143 The USB OTG controller communicates with the comparator using this
165 Enable this to support the USB OTG transceiver on TWL4030
229 This driver controls the entire USB PHY block, both the USB OTG
|
| /linux-4.4.14/arch/arm/mach-mmp/ |
| D | Kconfig | 134 bool "EHCI support for PXA USB OTG controller"
137 Enables support for OTG controller which can be switched to host mode.
|
| /linux-4.4.14/drivers/clk/imx/ |
| D | clk-pfd.c | 39 #define OTG 0xc macro
|
| /linux-4.4.14/drivers/usb/isp1760/ |
| D | Kconfig | 8 This driver does not support isochronous transfers or OTG.
|
| /linux-4.4.14/drivers/usb/host/ |
| D | Kconfig | 9 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
10 host/peripheral/OTG USB controllers.
213 This driver depends on OTG driver for PHY initialization,
254 USB SPH and OTG controller. SPH is a single port host, and it can
255 only be EHCI host. OTG is controller that can switch to host mode.
321 The OXU210HP is an USB host/OTG/device controller. Enable this
325 implement OTG nor USB device controllers.
355 Faraday FOTG210 is an OTG controller which can be configured as
|
| /linux-4.4.14/drivers/usb/ |
| D | README | 10 such as those for USB OTG and the various device classes.
|
| /linux-4.4.14/drivers/usb/gadget/udc/ |
| D | Kconfig | 99 Faraday USB2.0 OTG controller which can be configured as
220 USB2.0 OTG controller, which can be configured as high speed or
258 The UDC port supports OTG operation, and may be used as a host port
259 if it's not being used to implement peripheral or OTG roles.
|
| /linux-4.4.14/drivers/usb/musb/ |
| D | Kconfig | 2 # USB Dual Role (OTG-ready) Controller Drivers
|
| /linux-4.4.14/drivers/usb/gadget/legacy/ |
| D | Kconfig | 47 identifiers of the USB-OTG test device. That means that when
48 this gadget connects to another OTG device, with this one using
|
| /linux-4.4.14/arch/powerpc/boot/dts/ |
| D | canyonlands.dts | 188 interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
|
| /linux-4.4.14/arch/xtensa/configs/ |
| D | iss_defconfig | 484 # OTG and related infrastructure
|
| /linux-4.4.14/drivers/regulator/ |
| D | qcom_spmi-regulator.c | 1152 SPMI_VREG_VS(OTG, 0, INF),
|
| /linux-4.4.14/drivers/mfd/ |
| D | Kconfig | 1219 step-down converters, 11 general purpose LDOs, USB OTG Module,
1236 high speed USB OTG transceiver, an audio codec (on most
|
| /linux-4.4.14/ |
| D | MAINTAINERS | 11160 USB OTG FSM (Finite State Machine)
|