1#
2# USB Gadget support on a system involves
3#    (a) a peripheral controller, and
4#    (b) the gadget driver using it.
5#
6# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
7#
8#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
9#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
10#  - Some systems have both kinds of controllers.
11#
12# With help from a special transceiver and a "Mini-AB" jack, systems with
13# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
14#
15
16#
17# USB Peripheral Controller Support
18#
19# The order here is alphabetical, except that integrated controllers go
20# before discrete ones so they will be the initial/default value:
21#   - integrated/SOC controllers first
22#   - licensed IP used in both SOC and discrete versions
23#   - discrete ones (including all PCI-only controllers)
24#   - debug/dummy gadget+hcd is last.
25#
26menu "USB Peripheral Controller"
27
28#
29# Integrated controllers
30#
31
32config USB_AT91
33	tristate "Atmel AT91 USB Device Port"
34	depends on ARCH_AT91
35	depends on OF || COMPILE_TEST
36	help
37	   Many Atmel AT91 processors (such as the AT91RM2000) have a
38	   full speed USB Device Port with support for five configurable
39	   endpoints (plus endpoint zero).
40
41	   Say "y" to link the driver statically, or "m" to build a
42	   dynamically linked module called "at91_udc" and force all
43	   gadget drivers to also be dynamically linked.
44
45config USB_LPC32XX
46	tristate "LPC32XX USB Peripheral Controller"
47	depends on ARCH_LPC32XX && I2C
48	select USB_ISP1301
49	help
50	   This option selects the USB device controller in the LPC32xx SoC.
51
52	   Say "y" to link the driver statically, or "m" to build a
53	   dynamically linked module called "lpc32xx_udc" and force all
54	   gadget drivers to also be dynamically linked.
55
56config USB_ATMEL_USBA
57	tristate "Atmel USBA"
58	depends on ((AVR32 && !OF) || ARCH_AT91)
59	help
60	  USBA is the integrated high-speed USB Device controller on
61	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
62
63config USB_BCM63XX_UDC
64	tristate "Broadcom BCM63xx Peripheral Controller"
65	depends on BCM63XX
66	help
67	   Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
68	   high speed USB Device Port with support for four fixed endpoints
69	   (plus endpoint zero).
70
71	   Say "y" to link the driver statically, or "m" to build a
72	   dynamically linked module called "bcm63xx_udc".
73
74config USB_FSL_USB2
75	tristate "Freescale Highspeed USB DR Peripheral Controller"
76	depends on FSL_SOC || ARCH_MXC
77	select USB_FSL_MPH_DR_OF if OF
78	help
79	   Some of Freescale PowerPC and i.MX processors have a High Speed
80	   Dual-Role(DR) USB controller, which supports device mode.
81
82	   The number of programmable endpoints is different through
83	   SOC revisions.
84
85	   Say "y" to link the driver statically, or "m" to build a
86	   dynamically linked module called "fsl_usb2_udc" and force
87	   all gadget drivers to also be dynamically linked.
88
89config USB_FUSB300
90	tristate "Faraday FUSB300 USB Peripheral Controller"
91	depends on !PHYS_ADDR_T_64BIT && HAS_DMA
92	help
93	   Faraday usb device controller FUSB300 driver
94
95config USB_FOTG210_UDC
96	depends on HAS_DMA
97	tristate "Faraday FOTG210 USB Peripheral Controller"
98	help
99	   Faraday USB2.0 OTG controller which can be configured as
100	   high speed or full speed USB device. This driver supppors
101	   Bulk Transfer so far.
102
103	   Say "y" to link the driver statically, or "m" to build a
104	   dynamically linked module called "fotg210_udc".
105
106config USB_GR_UDC
107       tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
108       depends on HAS_DMA
109       help
110          Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
111	  VHDL IP core library.
112
113config USB_OMAP
114	tristate "OMAP USB Device Controller"
115	depends on ARCH_OMAP1
116	depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
117	help
118	   Many Texas Instruments OMAP processors have flexible full
119	   speed USB device controllers, with support for up to 30
120	   endpoints (plus endpoint zero).  This driver supports the
121	   controller in the OMAP 1611, and should work with controllers
122	   in other OMAP processors too, given minor tweaks.
123
124	   Say "y" to link the driver statically, or "m" to build a
125	   dynamically linked module called "omap_udc" and force all
126	   gadget drivers to also be dynamically linked.
127
128config USB_PXA25X
129	tristate "PXA 25x or IXP 4xx"
130	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
131	help
132	   Intel's PXA 25x series XScale ARM-5TE processors include
133	   an integrated full speed USB 1.1 device controller.  The
134	   controller in the IXP 4xx series is register-compatible.
135
136	   It has fifteen fixed-function endpoints, as well as endpoint
137	   zero (for control transfers).
138
139	   Say "y" to link the driver statically, or "m" to build a
140	   dynamically linked module called "pxa25x_udc" and force all
141	   gadget drivers to also be dynamically linked.
142
143# if there's only one gadget driver, using only two bulk endpoints,
144# don't waste memory for the other endpoints
145config USB_PXA25X_SMALL
146	depends on USB_PXA25X
147	bool
148	default n if USB_ETH_RNDIS
149	default y if USB_ZERO
150	default y if USB_ETH
151	default y if USB_G_SERIAL
152
153config USB_R8A66597
154	tristate "Renesas R8A66597 USB Peripheral Controller"
155	depends on HAS_DMA
156	help
157	   R8A66597 is a discrete USB host and peripheral controller chip that
158	   supports both full and high speed USB 2.0 data transfers.
159	   It has nine configurable endpoints, and endpoint zero.
160
161	   Say "y" to link the driver statically, or "m" to build a
162	   dynamically linked module called "r8a66597_udc" and force all
163	   gadget drivers to also be dynamically linked.
164
165config USB_RENESAS_USBHS_UDC
166	tristate 'Renesas USBHS controller'
167	depends on USB_RENESAS_USBHS && HAS_DMA
168	help
169	   Renesas USBHS is a discrete USB host and peripheral controller chip
170	   that supports both full and high speed USB 2.0 data transfers.
171	   It has nine or more configurable endpoints, and endpoint zero.
172
173	   Say "y" to link the driver statically, or "m" to build a
174	   dynamically linked module called "renesas_usbhs" and force all
175	   gadget drivers to also be dynamically linked.
176
177config USB_PXA27X
178	tristate "PXA 27x"
179	help
180	   Intel's PXA 27x series XScale ARM v5TE processors include
181	   an integrated full speed USB 1.1 device controller.
182
183	   It has up to 23 endpoints, as well as endpoint zero (for
184	   control transfers).
185
186	   Say "y" to link the driver statically, or "m" to build a
187	   dynamically linked module called "pxa27x_udc" and force all
188	   gadget drivers to also be dynamically linked.
189
190config USB_S3C2410
191	tristate "S3C2410 USB Device Controller"
192	depends on ARCH_S3C24XX
193	help
194	  Samsung's S3C2410 is an ARM-4 processor with an integrated
195	  full speed USB 1.1 device controller.  It has 4 configurable
196	  endpoints, as well as endpoint zero (for control transfers).
197
198	  This driver has been tested on the S3C2410, S3C2412, and
199	  S3C2440 processors.
200
201config USB_S3C2410_DEBUG
202	bool "S3C2410 udc debug messages"
203	depends on USB_S3C2410
204
205config USB_S3C_HSUDC
206	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
207	depends on ARCH_S3C24XX
208	help
209	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
210	  integrated with dual speed USB 2.0 device controller. It has
211	  8 endpoints, as well as endpoint zero.
212
213	  This driver has been tested on S3C2416 and S3C2450 processors.
214
215config USB_MV_UDC
216	tristate "Marvell USB2.0 Device Controller"
217	depends on HAS_DMA
218	help
219	  Marvell Socs (including PXA and MMP series) include a high speed
220	  USB2.0 OTG controller, which can be configured as high speed or
221	  full speed USB peripheral.
222
223config USB_MV_U3D
224	depends on HAS_DMA
225	tristate "MARVELL PXA2128 USB 3.0 controller"
226	help
227	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
228	  controller, which support super speed USB peripheral.
229
230#
231# Controllers available in both integrated and discrete versions
232#
233
234config USB_M66592
235	tristate "Renesas M66592 USB Peripheral Controller"
236	help
237	   M66592 is a discrete USB peripheral controller chip that
238	   supports both full and high speed USB 2.0 data transfers.
239	   It has seven configurable endpoints, and endpoint zero.
240
241	   Say "y" to link the driver statically, or "m" to build a
242	   dynamically linked module called "m66592_udc" and force all
243	   gadget drivers to also be dynamically linked.
244
245source "drivers/usb/gadget/udc/bdc/Kconfig"
246
247#
248# Controllers available only in discrete form (and all PCI controllers)
249#
250
251config USB_AMD5536UDC
252	tristate "AMD5536 UDC"
253	depends on PCI
254	help
255	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
256	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
257	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
258	   The UDC port supports OTG operation, and may be used as a host port
259	   if it's not being used to implement peripheral or OTG roles.
260
261	   Say "y" to link the driver statically, or "m" to build a
262	   dynamically linked module called "amd5536udc" and force all
263	   gadget drivers to also be dynamically linked.
264
265config USB_FSL_QE
266	tristate "Freescale QE/CPM USB Device Controller"
267	depends on FSL_SOC && (QUICC_ENGINE || CPM)
268	help
269	   Some of Freescale PowerPC processors have a Full Speed
270	   QE/CPM2 USB controller, which support device mode with 4
271	   programmable endpoints. This driver supports the
272	   controller in the MPC8360 and MPC8272, and should work with
273	   controllers having QE or CPM2, given minor tweaks.
274
275	   Set CONFIG_USB_GADGET to "m" to build this driver as a
276	   dynamically linked module called "fsl_qe_udc".
277
278config USB_NET2272
279	tristate "PLX NET2272"
280	help
281	  PLX NET2272 is a USB peripheral controller which supports
282	  both full and high speed USB 2.0 data transfers.
283
284	  It has three configurable endpoints, as well as endpoint zero
285	  (for control transfer).
286	  Say "y" to link the driver statically, or "m" to build a
287	  dynamically linked module called "net2272" and force all
288	  gadget drivers to also be dynamically linked.
289
290config USB_NET2272_DMA
291	bool "Support external DMA controller"
292	depends on USB_NET2272 && HAS_DMA
293	help
294	  The NET2272 part can optionally support an external DMA
295	  controller, but your board has to have support in the
296	  driver itself.
297
298	  If unsure, say "N" here.  The driver works fine in PIO mode.
299
300config USB_NET2280
301	tristate "NetChip 228x / PLX USB338x"
302	depends on PCI
303	help
304	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
305	   supports both full and high speed USB 2.0 data transfers.
306
307	   It has six configurable endpoints, as well as endpoint zero
308	   (for control transfers) and several endpoints with dedicated
309	   functions.
310
311	   PLX 3380 / 3382 is a PCIe based USB peripheral controller which
312	   supports full, high speed USB 2.0 and super speed USB 3.0
313	   data transfers.
314
315	   It has eight configurable endpoints, as well as endpoint zero
316	   (for control transfers) and several endpoints with dedicated
317	   functions.
318
319	   Say "y" to link the driver statically, or "m" to build a
320	   dynamically linked module called "net2280" and force all
321	   gadget drivers to also be dynamically linked.
322
323config USB_GOKU
324	tristate "Toshiba TC86C001 'Goku-S'"
325	depends on PCI
326	help
327	   The Toshiba TC86C001 is a PCI device which includes controllers
328	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
329
330	   The device controller has three configurable (bulk or interrupt)
331	   endpoints, plus endpoint zero (for control transfers).
332
333	   Say "y" to link the driver statically, or "m" to build a
334	   dynamically linked module called "goku_udc" and to force all
335	   gadget drivers to also be dynamically linked.
336
337config USB_EG20T
338	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
339	depends on PCI
340	help
341	  This is a USB device driver for EG20T PCH.
342	  EG20T PCH is the platform controller hub that is used in Intel's
343	  general embedded platform. EG20T PCH has USB device interface.
344	  Using this interface, it is able to access system devices connected
345	  to USB device.
346	  This driver enables USB device function.
347	  USB device is a USB peripheral controller which
348	  supports both full and high speed USB 2.0 data transfers.
349	  This driver supports both control transfer and bulk transfer modes.
350	  This driver dose not support interrupt transfer or isochronous
351	  transfer modes.
352
353	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
354	  for IVI(In-Vehicle Infotainment) use.
355	  ML7831 is for general purpose use.
356	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
357	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
358
359	  This driver can be used with Intel's Quark X1000 SOC platform
360
361config USB_GADGET_XILINX
362	tristate "Xilinx USB Driver"
363	depends on HAS_DMA
364	depends on OF || COMPILE_TEST
365	help
366	  USB peripheral controller driver for Xilinx USB2 device.
367	  Xilinx USB2 device is a soft IP which supports both full
368	  and high speed USB 2.0 data transfers. It has seven configurable
369	  endpoints(bulk or interrupt or isochronous), as well as
370	  endpoint zero(for control transfers).
371
372	  Say "y" to link the driver statically, or "m" to build a
373	  dynamically linked module called "udc-xilinx" and force all
374	  gadget drivers to also be dynamically linked.
375
376#
377# LAST -- dummy/emulated controller
378#
379
380config USB_DUMMY_HCD
381	tristate "Dummy HCD (DEVELOPMENT)"
382	depends on USB=y || (USB=m && USB_GADGET=m)
383	help
384	  This host controller driver emulates USB, looping all data transfer
385	  requests back to a USB "gadget driver" in the same host.  The host
386	  side is the master; the gadget side is the slave.  Gadget drivers
387	  can be high, full, or low speed; and they have access to endpoints
388	  like those from NET2280, PXA2xx, or SA1100 hardware.
389
390	  This may help in some stages of creating a driver to embed in a
391	  Linux device, since it lets you debug several parts of the gadget
392	  driver without its hardware or drivers being involved.
393
394	  Since such a gadget side driver needs to interoperate with a host
395	  side Linux-USB device driver, this may help to debug both sides
396	  of a USB protocol stack.
397
398	  Say "y" to link the driver statically, or "m" to build a
399	  dynamically linked module called "dummy_hcd" and force all
400	  gadget drivers to also be dynamically linked.
401
402# NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
403# first and will be selected by default.
404
405endmenu
406