Home
last modified time | relevance | path

Searched refs:LCD (Results 1 – 190 of 190) sorted by relevance

/linux-4.4.14/drivers/staging/fbtft/
DKconfig2 tristate "Support for small TFT LCD display modules"
13 tristate "FB driver for the AGM1264K-FL LCD display"
16 Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatible chips)
19 tristate "FB driver for the BD663474 LCD Controller"
25 tristate "FB driver for the HX8340BN LCD Controller"
31 tristate "FB driver for the HX8347D LCD Controller"
37 tristate "FB driver for the HX8353D LCD Controller"
43 tristate "FB driver for the HX8357D LCD Controller"
49 tristate "FB driver for the ILI9163 LCD Controller"
55 tristate "FB driver for the ILI9320 LCD Controller"
[all …]
DREADME4 Linux Framebuffer drivers for small TFT LCD display modules.
/linux-4.4.14/drivers/staging/panel/
DKconfig2 tristate "Parallel port LCD/Keypad Panel support"
5 Say Y here if you have an HD44780 or KS-0074 LCD connected to your
6 parallel port. This driver also features 4 and 6-key keypads. The LCD
21 and LCD are connected to two separate ports, you have to start two
37 1 = 2x16 parallel LCD, old keypad
38 2 = 2x16 serial LCD (KS-0074), new keypad
39 3 = 2x16 parallel LCD (Hantronix), no keypad
40 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad
41 5 = 2x40 parallel LCD (old one), with old keypad
66 int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"
[all …]
/linux-4.4.14/drivers/video/backlight/
DKconfig2 # Backlight & LCD drivers configuration
6 bool "Backlight & LCD device support"
9 backlight and the LCD panel on some platforms, for example on PDAs.
14 # LCD
17 tristate "Lowlevel LCD controls"
20 This framework adds support for low-level control of LCD.
21 Some framebuffer devices connect to platform-specific LCD modules
23 (contrast and applying power to the LCD (not to the backlight!)).
25 To have support for your specific LCD panel you will have to
31 tristate "LCD Panel support for SHARP corgi/spitz model"
[all …]
/linux-4.4.14/drivers/video/fbdev/omap2/displays-new/
DKconfig52 This is the LCD panel used on Nokia N900
55 tristate "LG.Philips LB035Q02 LCD Panel"
58 LCD Panel used on the Gumstix Overo Palo35
61 tristate "Sharp LS037V7DW01 LCD Panel"
64 LCD Panel used in TI's SDP3430 and EVM boards
67 tristate "TPO TD028TTEC1 LCD Panel"
70 LCD panel used in Openmoko.
73 tristate "TPO TD043MTEA1 LCD Panel"
76 LCD Panel used in OMAP3 Pandora
83 This NEC NL8048HL11 panel is TFT LCD used in the
/linux-4.4.14/Documentation/auxdisplay/
Dks01082 ks0108 LCD Controller Driver Documentation
24 This driver supports the ks0108 LCD controller.
32 Device Name: KS0108 LCD Controller
36 Type: LCD Controller (Liquid Crystal Display Controller)
52 If you aren't building LCD related hardware, you should check
53 your LCD specific wiring information in the same folder.
Dcfag12864b2 cfag12864b LCD Driver Documentation
25 This driver supports a cfag12864b LCD.
33 Device Name: Crystalfontz 12864b LCD Series
37 Type: LCD (Liquid Crystal Display)
53 The cfag12864b LCD Series don't have official wiring.
99 Although the LCD won't get updated until the next refresh time arrives.
/linux-4.4.14/Documentation/devicetree/bindings/misc/
Darm-charlcd.txt1 ARM Versatile Character LCD
3 This binding defines the character LCD interface found on ARM Versatile AB
8 - reg : Location and size of character LCD registers
11 - interrupts - single interrupt for character LCD. The character LCD can
/linux-4.4.14/drivers/auxdisplay/
DKconfig19 tristate "KS0108 LCD Controller"
23 If you have a LCD controlled by one or more KS0108
25 driver for your LCD.
37 hex "Parallel port where the LCD is connected"
41 The address of the parallel port where the LCD is connected.
66 If your LCD seems to miss random writings, increment this.
74 tristate "CFAG12864B LCD"
84 If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
85 say Y. You also need the ks0108 LCD Controller driver.
87 For help about how to wire your LCD to the parallel port,
[all …]
/linux-4.4.14/Documentation/fb/
Dsa1100fb.txt6 This is a driver for a graphic framebuffer for the SA-1100 LCD
24 (controlling backlights, powering on the LCD, etc.), the command line
33 lccr0:<value> Configure LCD control register 0 (11.7.3)
34 lccr1:<value> Configure LCD control register 1 (11.7.4)
35 lccr2:<value> Configure LCD control register 2 (11.7.5)
36 lccr3:<value> Configure LCD control register 3 (11.7.6)
Dviafb.txt14 Device: CRT, LCD, DVI
59 0 : LCD panel with LSB data format input (default)
60 1 : LCD panel with MSB data format input
106 This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
131 1 : LCD only
133 3 : LCD+DVI (default)
158 This option is used to specify LCD output port,
160 for external LCD + external DVI on CX700(External LCD is on DVP0),
Dep93xx-fb.txt2 Driver for EP93xx LCD controller
5 The EP93xx LCD controller can drive both standard desktop monitors and
6 embedded LCD displays. If you have a standard desktop monitor then you
14 If you have an embedded LCD display then you need to define a video
D00-INDEX23 - info on the driver for EP93xx LCD controller.
47 - info on the driver for the PXA25x LCD controller.
51 - information about the driver for the SA-1100 LCD controller.
Dsisfb.txt93 defaults to 800x600x8 unless CRT2 type is LCD, in which case the LCD's native
98 type is LCD, in which case it defaults to the LCD's native resolution. If
123 correctly, especially on laptops or if the output devices are LCD or TV.
Dsh7760fb.txt6 The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
45 The LCDC must explicitly be told about the type of LCD panel
Dpxafb.txt1 Driver for PXA25x LCD controller
61 Overlay Support for PXA27x and later LCD controllers
Dpvr2fb.txt42 inverse - invert colors on screen (for LCD displays)
Dmatroxfb.txt184 inverse - invert colors on screen (for LCD displays)
/linux-4.4.14/drivers/video/fbdev/omap/
DKconfig12 bool "External LCD controller support"
16 external LCD controller connected to the SoSSI/RFBI interface.
19 bool "Epson HWA742 LCD controller support"
23 Epson HWA742 LCD controller.
35 bool "MIPI DBI-C/DCS compatible LCD support"
43 bool "TPS65010 LCD controller on OMAP-H3"
48 Say Y here if you want to have support for the LCD on the
/linux-4.4.14/arch/avr32/boards/atngw100/
DKconfig6 bool "Enable ATNGW100 mkII LCD interface"
9 This enables the LCD controller (LCDC) in the AT32AP7000. Since the
28 addon board for the NGW100 and NGW100 mkII. By enabling this the LCD
35 RMT provides LCD support, AC97 codec and other
39 MCI platform device, since it conflicts with the LCD platform device.
46 prompt "LCD panel resolution on EVKLCD10X"
DKconfig_mrmt33 prompt "RMTx LCD Selection"
37 bool "LCD Disabled"
55 bool "Use PWM control for LCD Backlight"
57 Use PWM driver for controlling LCD Backlight.
58 Otherwise, LCD Backlight is always on.
/linux-4.4.14/Documentation/arm/SA1100/
DPangolin5 PCMCIA/IDE card and TFT-LCD card.
18 - SA1100 LCD controller for 800x600 16bpp TFT-LCD
19 - MQ-200 driver for 800x600 16bpp TFT-LCD
DADSBitsy19 - SA1100 LCD frame buffer (8/16bpp...sort of)
24 - console on LCD screen
DGraphicsMaster19 - SA1100 LCD frame buffer (8/16bpp...sort of)
27 - console on LCD screen
DGraphicsClient63 - SA1100 LCD frame buffer (8/16bpp...sort of)
70 - console on LCD screen
DBrutus50 - LCD screen
DItsy16 Disable Flash and LCD support. and then do a make zImage.
DAssabet260 LCD: Fully tested. PM
261 (LCD doesn't like being blanked with
/linux-4.4.14/arch/avr32/boards/hammerhead/
DKconfig14 bool "Atmel AT91/AT32 LCD support"
16 This enables LCD support for the Hammerhead board. You may
17 also add support for framebuffer devices (AT91/AT32 LCD Controller)
18 and framebuffer console support to get the most out of your LCD.
21 want to have support for your Hantronix HDA-351T-LV LCD.
/linux-4.4.14/drivers/pinctrl/
Dpinctrl-lpc18xx.c264 LPC_P(3,1, I2S0_TX_WS, I2S0_RX_WS,CAN0,USB1,GPIO, R, LCD, R, 0, ND);
265 LPC_P(3,2, I2S0_TX_SDA, I2S0_RX_SDA,CAN0,USB1,GPIO, R, LCD, R, 0, ND);
267 LPC_P(3,4, GPIO, R, R, SPIFI, UART1, I2S0_TX_WS, I2S1, LCD, 0, ND);
268 LPC_P(3,5, GPIO, R, R, SPIFI, UART1, I2S0_TX_SDA,I2S1, LCD, 0, ND);
272 LPC_P(4,0, GPIO, MCTRL, NMI, R, R, LCD, UART3, R, 0, ND);
273 LPC_P(4,1, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, ENET, ADC0|1, ND);
274 LPC_P(4,2, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, 0, ND);
275 LPC_P(4,3, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, ADC0|0, ND);
276 LPC_P(4,4, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, DAC, ND);
277 LPC_P(4,5, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND);
[all …]
/linux-4.4.14/Documentation/video4linux/
DREADME.davinci-vpbe40 using sub device ops. The connection of external encoders to VENC LCD
56 setting timings at LCD controller port when external encoders are connected
57 at the port or LCD panel timings required. When external encoder/LCD panel
62 Support LCD Panel displays using the VENC. For example to support a Logic
63 PD display, it requires setting up the LCD controller port with a set of
68 various LCD displays.As of this patch a basic driver is present, and this
90 - add support for LogicPD LCD.
Dfimc.txt9 data from LCD controller (FIMD) through the SoC internal writeback data
12 availability, LCD writeback support, etc. The driver is located at
32 - LCD writeback input
Dgspca.txt178 sunplus 055f:c430 Mustek Gsmart LCD 2
181 sunplus 055f:c530 Mustek Gsmart LCD 3
214 sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom
229 sunplus 0733:2211 Jenoptik jdc 21 LCD
/linux-4.4.14/drivers/video/fbdev/exynos/
DKconfig24 bool "S6E8AX0 MIPI AMOLED LCD Driver"
29 If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
30 LCD control driver.
/linux-4.4.14/Documentation/ABI/testing/
Dsysfs-class-lcd6 Control LCD power, values are FB_BLANK_* from fb.h
15 Current contrast of this LCD device. Value is between 0 and
23 Maximum contrast for this LCD device.
Dsysfs-platform-eeepc-laptop7 - 1 = LCD
9 - 3 = LCD+CRT
Dsysfs-platform-asus-laptop9 |||`- LCD
14 - 3 (0011b) CRT+LCD.
Dsysfs-driver-hid-picolcd4 Description: Make it possible to switch the PicoLCD device between LCD
/linux-4.4.14/Documentation/devicetree/bindings/display/panel/
Dnec,nl4827hc19-05b.txt1 NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
Dortustech,com43h4m85ulc.txt1 OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
Dlg,lb070wv8.txt1 LG 7" (800x480 pixels) TFT LCD panel
Dinnolux,at043tn24.txt1 Innolux AT043TN24 4.3" WQVGA TFT LCD panel
Dpanasonic,vvx10f004b00.txt1 Panasonic Corporation 10.1" WUXGA TFT LCD panel
Dlg,lp129qe.txt1 LG 12.9" (2560x1700 pixels) TFT LCD panel
Dinnolux,n156bge-l21.txt1 InnoLux 15.6" WXGA TFT LCD panel
Dsamsung,ltn101nt05.txt1 Samsung Electronics 10.1" WSVGA TFT LCD panel
Dgiantplus,gpg482739qs5.txt1 GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
Dauo,b101xtn01.txt1 AU Optronics Corporation 10.1" WXGA TFT LCD panel
Dauo,b101aw03.txt1 AU Optronics Corporation 10.1" WSVGA TFT LCD panel
Dlg,lh500wx1-sd03.txt1 LG Corporation 5" HD TFT LCD panel
Dfoxlink,fl500wvr00-a0t.txt1 Foxlink Group 5" WVGA TFT LCD panel
Dsamsung,ltn140at29-301.txt1 Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
Dinnolux,n116bge.txt1 Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
Dauo,b101ean01.txt1 AU Optronics Corporation 10.1" WSVGA TFT LCD panel
Dlg,ld070wx3-sl01.txt1 LG Corporation 7" WXGA TFT LCD panel
Dauo,b080uan01.txt1 AU Optronics Corporation 8.0" WUXGA TFT LCD panel
Dinnolux,g121i1-l01.txt1 Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
Dedt,et057090dhu.txt1 Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
Dchunghwa,claa101wb03.txt1 Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
Dinnolux,zj070na-01p.txt1 Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
Dauo,b133xtn01.txt1 AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
Dhannstar,hsd070pww1.txt1 HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
Dhit,tx23d38vm0caa.txt1 Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
Davic,tm070ddh03.txt1 Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
Dampire,am800480r3tmqwa1h.txt1 Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
Dchunghwa,claa101wa01a.txt1 Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
Dauo,b116xw03.txt1 AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
Dauo,b133htn01.txt1 AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
Dshelly,sca07010-bfn-lnn.txt1 Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
Dokaya,rs800480t-7x0gp.txt1 OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
Dedt,et070080dh6.txt1 Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel
Dedt,etm0700g0dh6.txt1 Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel
Dsamsung,s6e8aa0.txt1 Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
Dsharp,ls037v7dw01.txt1 SHARP LS037V7DW01 TFT-LCD panel
Dsamsung,ld9040.txt1 Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
Dsharp,lq101r1sx01.txt1 Sharp Microelectronics 10.1" WQXGA TFT LCD panel
/linux-4.4.14/Documentation/devicetree/bindings/display/
Dcirrus,clps711x-fb.txt12 - ac-prescale : LCD AC bias frequency. This frequency is the required
13 AC bias frequency for a given manufacturer's LCD plate.
17 - lcd-supply: Regulator for LCD supply voltage.
Dmarvell,pxa2xx-lcdc.txt1 PXA LCD Controller
14 - port: connection to the LCD panel (see video-interfaces.txt)
Darm,pl11x.txt1 * ARM PrimeCell Color LCD Controller PL110/PL111
40 - port: describes LCD panel signals, following the common binding
51 pad used as B0, see also "LCD panel signal multiplexing
Datmel,lcdc.txt26 - lcd-supply: Regulator for LCD supply voltage.
64 - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
Dmxsfb.txt1 * Freescale MXS LCD Interface (LCDIF)
Dsm501fb.txt3 The SM SM501 is a LCD controller, with proper hardware, it can also
/linux-4.4.14/arch/mips/lasat/
DKconfig2 tristate "PICVUE LCD display driver"
6 tristate "PICVUE LCD display driver /proc interface"
/linux-4.4.14/arch/arm/boot/dts/
Domap3-devkit8000-lcd43.dts11 * 4.3'' LCD panel sold with devkit8000 board
16 model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
Domap3-devkit8000-lcd70.dts11 * 7.0'' LCD panel sold with some devkit8000 board
16 model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
Dimx53-tx53-x03x.dts19 model = "Ka-Ro electronics TX53 module (LCD)";
180 regulator-name = "LCD POWER";
191 regulator-name = "LCD RESET";
Dtegra30-colibri-eval-v3.dts151 * edt,et057090dhu: EDT 5.7" LCD TFT
152 * edt,et070080dh6: EDT 7.0" LCD TFT
Dwm8850-w70v2.dts5 * - HongLianYing 'HLY070ML268-21A' 7" LCD panel
Dtegra30-apalis-eval.dts205 * edt,et057090dhu: EDT 5.7" LCD TFT
206 * edt,et070080dh6: EDT 7.0" LCD TFT
Dkirkwood-ts419.dtsi29 * JP1 indicates if an LCD module is installed
Dsocfpga_arria10_socdk.dtsi79 * because the LCD module does not work at the standard 100Khz
Domap3-ha-lcd.dts13 model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
Domap3-overo-common-lcd43.dtsi10 * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
Dimx27-eukrea-mbimxsd27-baseboard.dts73 regulator-name = "LCD";
Domap3-overo-common-lcd35.dtsi10 * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
Dimx6qdl-tx6.dtsi492 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */
498 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */
Dat91sam9x5_lcd.dtsi3 * LCD controller.
Dimx28-tx28.dts105 regulator-name = "LCD POWER";
115 regulator-name = "LCD RESET";
Ddove-sbc-a510.dts53 * 0.5 LCD nRST (active low reset)
Domap3-pandora-common.dtsi211 * disabling this regulator causes current leakage, and LCD flicker
439 /* LCD */
Dsama5d3_lcd.dtsi3 * LCD support
Dam43x-epos-evm.dts313 /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
543 * High: LCD display with analog audio via aic3111 codec
Dam437x-gp-evm.dts295 /* GPIO 5_8 to select LCD / HDMI */
700 * High: LCD display with analog audio via aic3111 codec
Dste-href-family-pinctrl.dtsi614 "lcdvsi0_a_1", /* VSI0 for LCD */
Dimx6qdl-aristainetos2.dtsi491 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */
Dam335x-pepper.dts190 /* Display: 24-bit LCD Screen */
Dste-dbx5x0.dtsi1214 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
/linux-4.4.14/drivers/media/tuners/
Dtuner-xc2028-types.h49 #define STD_SPECIFIC_TYPES (MTS|FM|LCD|NOGD)
62 #define LCD (1<<12) macro
Dxc4000.c598 if (type & LCD) in dump_firm_type_and_int_freq()
657 & (BASE_TYPES | DTV_TYPES | LCD | NOGD | MONO | SCODE); in seek_firmware()
Dtuner-xc2028.c207 if (type & LCD) in dump_firm_type_and_int_freq()
/linux-4.4.14/Documentation/devicetree/bindings/display/armada/
Dmarvell,dove-lcd.txt5 - reg: base address and size of the LCD controller
6 - interrupts: single interrupt number for the LCD controller
/linux-4.4.14/Documentation/input/
Dyealink.txt7 - LCD full support, yealink.ko / sysfs API
68 3. LCD features
70 The LCD is divided and organised as a 3 line display:
137 Writing to /sys/../lineX will set the corresponding LCD line.
147 Will update the LCD with the current date & time.
/linux-4.4.14/Documentation/arm/OMAP/
DDSS153 - DISPC LCD overlay manager can be connected to all displays, except TV
232 Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
238 FB1 --- VID1 --+- LCD ---- LCD
241 Example: Switch from LCD to DVI
257 FB1 --- VID1 --+- LCD -/ LCD
260 Example: Clone GFX overlay to LCD and TV
282 FB0 +-- GFX ---- LCD ---- LCD
/linux-4.4.14/drivers/video/fbdev/
DKconfig291 Colour LCD controller. ARM PrimeCells provide the building
323 tristate "CLPS711X LCD support"
338 bool "SA-1100 LCD support"
344 This is a framebuffer device for the SA-1100 LCD Controller.
348 If you plan to use the LCD display with your SA-1100 system, say
352 tristate "Freescale i.MX1/21/25/27 LCD support"
455 tristate "Arc Monochrome LCD board support"
462 This enables support for the Arc Monochrome LCD board. The board
568 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
574 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
[all …]
/linux-4.4.14/arch/arc/boot/dts/
Dvdk_axs10x_mb.dtsi77 /* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */
85 /* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */
/linux-4.4.14/arch/sh/boards/mach-migor/
DKconfig4 prompt "Migo-R LCD Panel Board Selection"
/linux-4.4.14/drivers/parisc/
DKconfig129 bool "Chassis LCD and LED support"
135 or support for the LCD that can be found on recent material.
150 This driver will also display progress messages on LCD display,
152 shown by the LED/LCD driver.
153 This driver updates the state panel (LED and/or LCD) upon system
/linux-4.4.14/drivers/gpu/drm/armada/
DKconfig10 Support the "LCD" controllers found on the Marvell Armada 510
/linux-4.4.14/Documentation/arm/stm32/
Dstm32f429-overview.txt12 - LCD controller & Camera interface
/linux-4.4.14/Documentation/laptops/
Dasus-laptop.txt14 switching the LCD backlight on and off, and most importantly, allows you to
39 - LCD brightness control
40 - LCD on and off
114 | Bin | Val | DVI | TV | CRT | LCD |
Dthinkpad-acpi.txt44 - LCD brightness control
616 LCD, CRT or DVI (if available). The following commands are available:
647 whether the display is expanded to fill the entire LCD screen when a
710 4 - Related to "LCD brightness up" key press
711 5 - Related to "LCD brightness down" key press
936 LCD brightness control
942 This feature allows software control of the LCD brightness on ThinkPad
945 It has some limitations: the LCD backlight cannot be actually turned
979 the LCD brightness control feature will be enabled when available.
Dsonypi.txt32 This driver supports also some ioctl commands for setting the LCD screen
/linux-4.4.14/arch/xtensa/
DKconfig455 bool "Enable XTFPGA LCD driver"
459 There's a 2x16 LCD on most of XTFPGA boards, kernel may output
466 hex "XTFPGA LCD base address"
470 Base address of the LCD controller inside KIO region.
471 Different boards from XTFPGA family have LCD controller at different
476 bool "Use 8-bit access to XTFPGA LCD"
480 LCD may be connected with 4- or 8-bit interface, 8-bit access may
/linux-4.4.14/Documentation/devicetree/bindings/powerpc/fsl/
Ddiu.txt3 The Freescale DIU is a LCD controller, with proper hardware, it can also
/linux-4.4.14/Documentation/devicetree/bindings/pwm/
Datmel-hlcdc-pwm.txt1 Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
/linux-4.4.14/arch/sh/cchips/
DKconfig15 the SH7709 CPU, supporting a LCD controller,
/linux-4.4.14/Documentation/devicetree/bindings/mfd/
Datmel-hlcdc.txt1 Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
/linux-4.4.14/Documentation/devicetree/bindings/display/atmel/
Dhlcdc-dc.txt1 Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
/linux-4.4.14/arch/arm/mach-mmp/
Dclock-pxa168.c59 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
Dpxa168.c110 PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
Dpxa910.c144 PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
/linux-4.4.14/Documentation/devicetree/bindings/display/imx/
Dfsl,imx-fb.txt18 - lcd-supply: Regulator for LCD supply voltage.
/linux-4.4.14/Documentation/devicetree/bindings/media/
Drenesas,vsp1.txt22 - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
Dsamsung-fimc.txt89 - samsung,lcd-wb: this property must be present if the IP block has the LCD
/linux-4.4.14/drivers/staging/olpc_dcon/
DKconfig11 controller (integrate into the processor or chipset) and the LCD
/linux-4.4.14/Documentation/arm/Samsung-S3C24XX/
DSMDK2440.txt8 processor. It includes support for LCD, SmartMedia, Audio, SD and
/linux-4.4.14/drivers/gpu/drm/panel/
DKconfig47 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
/linux-4.4.14/Documentation/devicetree/bindings/display/rockchip/
Drockchip-vop.txt5 buffer to an external LCD interface.
/linux-4.4.14/Documentation/devicetree/bindings/reset/
Dnxp,lpc1850-rgu.txt22 16 LCD controller
/linux-4.4.14/Documentation/devicetree/bindings/display/exynos/
Dexynos5433-decon.txt5 buffer to an external LCD interface.
Dexynos7-decon.txt5 buffer to an external LCD interface.
Dsamsung-fimd.txt5 buffer to an external LCD interface.
/linux-4.4.14/Documentation/power/regulator/
Doverview.txt109 from 5mA to 10mA to increase LCD illumination. This passes
112 Consumer: need to increase LCD brightness. Lookup and
Dconsumer.txt101 current limit to match system operating points. e.g. LCD backlight driver can
/linux-4.4.14/drivers/clk/pxa/
Dclk-pxa25x.c138 PXA25X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, clk_pxa25x_memory_parents, 0),
Dclk-pxa27x.c140 PXA27X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, pxa27x_lcd_bus_parents, 0),
Dclk-pxa3xx.c168 PXA3XX_CKEN("pxa2xx-fb", NULL, pxa3xx_sbus_parents, 1, 1, 1, 1, LCD,
/linux-4.4.14/arch/arm/mach-davinci/
DKconfig151 bool "LCD"
153 Say Y here to use the LCD as a framebuffer or simple character
/linux-4.4.14/Documentation/devicetree/bindings/devfreq/event/
Dexynos-ppmu.txt8 usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
/linux-4.4.14/drivers/platform/x86/
DKconfig34 exposes the mail LED and LCD backlight.
86 support for video output switching, LCD backlight control,
175 It adds support for LCD brightness control and some hotkeys.
281 It adds support for Bluetooth, WLAN and LCD brightness control.
312 It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
653 by the general ACPI drivers, such as LCD brightness, video output,
854 function keys, wireless LED, LCD backlight level.
/linux-4.4.14/Documentation/spi/
Dbutterfly8 sensors, LCD, flash, toggle stick, and more. You can use AVR-GCC to
/linux-4.4.14/Documentation/devicetree/bindings/clock/
Dlpc1850-cgu.txt58 11 BASE_LCD_CLK Base clock for LCD
Dmvebu-gated-clock.txt108 16 lcd LCD Cntrl
/linux-4.4.14/Documentation/cpu-freq/
Dcore.txt35 speed limits (like LCD drivers on ARM architecture). Additionally, the
/linux-4.4.14/arch/unicore32/
DKconfig233 tristate "LCD Backlight support"
/linux-4.4.14/drivers/usb/misc/
DKconfig72 tristate "USB LCD driver support"
76 alphanumeric LCD modules. See <http://www.usblcd.de/> for more
/linux-4.4.14/drivers/macintosh/
DKconfig136 bool "Backlight control for LCD screens"
259 tristate "Support for ANS LCD display"
/linux-4.4.14/Documentation/devicetree/bindings/arm/omap/
Domap.txt124 - OMAP4 VAR-DVK-OM44 : Commercial dev kit with VAR-OM44CustomBoard, VAR-SOM-OM44 w/WLAN and LCD tou…
/linux-4.4.14/arch/arm/mach-sa1100/
DKconfig148 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
/linux-4.4.14/arch/m32r/platforms/mappi/
Ddot.gdbinit100 # LCD & CRT dual-head setting (8bpp)
Ddot.gdbinit.nommu100 # LCD & CRT dual-head setting (8bpp)
Ddot.gdbinit.smp164 # LCD & CRT dual-head setting (8bpp)
/linux-4.4.14/arch/avr32/
DKconfig138 bool "Favr-32 LCD-board"
/linux-4.4.14/drivers/pwm/
DKconfig59 (Atmel High-end LCD Controller). This PWM output is mainly used
60 to control the LCD backlight.
/linux-4.4.14/arch/m68k/
DKconfig.machine179 bool "Initialize LCD"
182 Initialize the LCD controller of the 68x328 processor.
/linux-4.4.14/arch/arm/mach-s3c64xx/
DKconfig41 Compile in platform device definition LCD backlight with PWM Timer
/linux-4.4.14/arch/powerpc/boot/dts/
Dsbc8641d.dts81 6 0 0xf4000000 0x00100000 // LCD display (1MB)
/linux-4.4.14/Documentation/devicetree/bindings/
Dvendor-prefixes.txt152 nec NEC LCD Technologies, Ltd.
Dxilinx.txt6 devices (gpio, LCD, spi, etc). Also, since these devices are
/linux-4.4.14/Documentation/kbuild/
Dkconfig.txt195 bluetitle => a LCD friendly version of classic. (default)
/linux-4.4.14/drivers/clk/nxp/
Dclk-lpc18xx-cgu.c233 LPC1XX_CGU_BASE_CLK(LCD, base_common_src_ids, 0),
/linux-4.4.14/drivers/misc/
DKconfig432 bool "ARM Ltd. Character LCD Driver"
435 This is a driver for the character LCD found on the ARM Ltd.
/linux-4.4.14/drivers/leds/
DKconfig69 tristate "LCD Backlight driver for LM3530"
73 This option enables support for the LCD backlight using
/linux-4.4.14/Documentation/arm/pxa/
Dmfp.txt103 /* LCD - 16bpp Active TFT */
/linux-4.4.14/Documentation/acpi/
Dnamespace.txt153 | +-| DD01 | Device(DD01): the LCD output device
/linux-4.4.14/arch/arm/mach-s3c24xx/
DKconfig473 available via various sources. It can come with a 3.5" or 7" touch LCD.
/linux-4.4.14/drivers/media/rc/
DKconfig184 IR Receiver and/or LCD/VFD/VGA display.
/linux-4.4.14/drivers/usb/serial/
DKconfig643 tristate "USB ZyXEL omni.net LCD Plus Driver"
645 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
/linux-4.4.14/drivers/gpio/
DKconfig564 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
565 LCD port.
/linux-4.4.14/drivers/mfd/
DKconfig49 individual components like LCD backlight, LEDs, GPIOs and Kepad
75 tristate "Atmel HLCDC (High-end LCD Controller)"
154 individual components like LCD backlight, voltage regulators,
/linux-4.4.14/Documentation/thermal/
Dsysfs-api.txt389 - for generic ACPI: should be "Fan", "Processor" or "LCD"
/linux-4.4.14/Documentation/
D00-INDEX85 - misc. LCD driver documentation (cfag12864b, ks0108).
Ddevices.txt374 156 = /dev/lcd Front panel LCD display
409 192 = /dev/nas_xbus NAS xbus LCD/buttons access
2547 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
2561 144 = /dev/usb/lcd USB LCD device
/linux-4.4.14/Documentation/power/
Ddevices.txt652 can be fully active in certain sleep states, such as an LCD display that's
661 ways; the aforementioned LCD might be active in one product's "standby",
/linux-4.4.14/drivers/input/misc/
DKconfig397 Say Y here if you want to enable keyboard and LCD functions of the
/linux-4.4.14/Documentation/arm64/
Darm-acpi.txt352 LCD displays, for example.
/linux-4.4.14/drivers/hid/
DKconfig638 Provide access to PicoLCD's LCD contrast via lcd class.
/linux-4.4.14/
DCREDITS843 D: PA-RISC Linux hacker, LASI-, ASP-, WAX-, LCD/LED-driver
2051 D: Arc monochrome LCD framebuffer driver, x86 reboot fixups
DMAINTAINERS2711 CFAG12864B LCD DRIVER
2719 CFAG12864BFB LCD FRAMEBUFFER DRIVER
6202 KS0108 LCD CONTROLLER DRIVER
10195 STAGING - PARALLEL LCD/KEYPAD PANEL DRIVER
/linux-4.4.14/arch/x86/
DKconfig2280 turn off the LCD backlight when the screen blanker of the Linux