Home
last modified time | relevance | path

Searched refs:CTRL (Results 1 – 59 of 59) sorted by relevance

/linux-4.4.14/drivers/rtc/
Drtc-at32ap700x.c127 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_setalarm()
130 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_setalarm()
149 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_alarm_irq_enable()
154 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_alarm_irq_enable()
177 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_interrupt()
236 if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) { in at32_rtc_probe()
237 rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR)); in at32_rtc_probe()
239 rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe) in at32_rtc_probe()
/linux-4.4.14/drivers/scsi/arm/
Dcumana_1.c42 #define CTRL 0x16fc macro
55 writeb(0x02, priv(host)->base + CTRL); in NCR5380_pwrite()
80 writeb(0x12, priv(host)->base + CTRL); in NCR5380_pwrite()
106 writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL); in NCR5380_pwrite()
118 writeb(0x00, priv(host)->base + CTRL); in NCR5380_pread()
142 writeb(0x10, priv(host)->base + CTRL); in NCR5380_pread()
168 writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL); in NCR5380_pread()
177 writeb(0, base + CTRL); in cumanascsi_read()
182 writeb(0x40, base + CTRL); in cumanascsi_read()
191 writeb(0, base + CTRL); in cumanascsi_write()
[all …]
/linux-4.4.14/drivers/net/ethernet/intel/e1000e/
Dmac.c485 ctrl = er32(CTRL); in e1000e_check_for_fiber_link()
509 ctrl = er32(CTRL); in e1000e_check_for_fiber_link()
511 ew32(CTRL, ctrl); in e1000e_check_for_fiber_link()
527 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000e_check_for_fiber_link()
550 ctrl = er32(CTRL); in e1000e_check_for_serdes_link()
572 ctrl = er32(CTRL); in e1000e_check_for_serdes_link()
574 ew32(CTRL, ctrl); in e1000e_check_for_serdes_link()
590 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000e_check_for_serdes_link()
857 ctrl = er32(CTRL); in e1000e_setup_fiber_serdes_link()
876 ew32(CTRL, ctrl); in e1000e_setup_fiber_serdes_link()
[all …]
D82571.c997 ctrl = er32(CTRL); in e1000_reset_hw_82571()
1000 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_82571()
1213 reg = er32(CTRL); in e1000_initialize_hw_bits_82571()
1215 ew32(CTRL, reg); in e1000_initialize_hw_bits_82571()
1443 ctrl = er32(CTRL); in e1000_setup_copper_link_82571()
1446 ew32(CTRL, ctrl); in e1000_setup_copper_link_82571()
1522 ctrl = er32(CTRL); in e1000_check_for_serdes_link_82571()
1555 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000_check_for_serdes_link_82571()
1589 ew32(CTRL, ctrl); in e1000_check_for_serdes_link_82571()
1611 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000_check_for_serdes_link_82571()
Dethtool.c445 regs_buff[0] = er32(CTRL); in e1000_get_regs()
1327 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1334 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
1406 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1427 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
1443 u32 ctrl = er32(CTRL); in e1000_set_82571_fiber_loopback()
1452 ew32(CTRL, ctrl); in e1000_set_82571_fiber_loopback()
1463 ctrl = er32(CTRL); in e1000_set_82571_fiber_loopback()
1465 ew32(CTRL, ctrl); in e1000_set_82571_fiber_loopback()
1483 u32 ctrl = er32(CTRL); in e1000_set_es2lan_mac_loopback()
[all …]
D80003es2lan.c703 ctrl = er32(CTRL); in e1000_reset_hw_80003es2lan()
710 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_80003es2lan()
1034 ctrl = er32(CTRL); in e1000_setup_copper_link_80003es2lan()
1037 ew32(CTRL, ctrl); in e1000_setup_copper_link_80003es2lan()
Dich8lan.c276 mac_reg = er32(CTRL); in e1000_toggle_lanphypc_pch_lpt()
279 ew32(CTRL, mac_reg); in e1000_toggle_lanphypc_pch_lpt()
283 ew32(CTRL, mac_reg); in e1000_toggle_lanphypc_pch_lpt()
2264 ctrl_reg = er32(CTRL); in e1000_configure_k1_ich8lan()
2268 ew32(CTRL, reg); in e1000_configure_k1_ich8lan()
2273 ew32(CTRL, ctrl_reg); in e1000_configure_k1_ich8lan()
4636 ctrl = er32(CTRL); in e1000_reset_hw_ich8lan()
4654 ew32(CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw_ich8lan()
4856 reg = er32(CTRL); in e1000_initialize_hw_bits_ich8lan()
4858 ew32(CTRL, reg); in e1000_initialize_hw_bits_ich8lan()
[all …]
Dphy.c1445 ctrl = er32(CTRL); in e1000e_phy_force_speed_duplex_setup()
1480 ew32(CTRL, ctrl); in e1000e_phy_force_speed_duplex_setup()
2123 ctrl = er32(CTRL); in e1000e_phy_hw_reset_generic()
2124 ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); in e1000e_phy_hw_reset_generic()
2129 ew32(CTRL, ctrl); in e1000e_phy_hw_reset_generic()
Dnetdev.c1166 if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE)) in e1000_print_hw_hang()
2814 ctrl = er32(CTRL); in e1000e_vlan_strip_disable()
2816 ew32(CTRL, ctrl); in e1000e_vlan_strip_disable()
2829 ctrl = er32(CTRL); in e1000e_vlan_strip_enable()
2831 ew32(CTRL, ctrl); in e1000e_vlan_strip_enable()
4992 u32 ctrl = er32(CTRL); in e1000_print_link_info()
5037 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { in e1000e_has_link()
6176 mac_reg = er32(CTRL); in e1000_init_phy_wakeup()
6279 ctrl = er32(CTRL); in __e1000_shutdown()
6283 ew32(CTRL, ctrl); in __e1000_shutdown()
/linux-4.4.14/drivers/watchdog/
Dat32ap700x_wdt.c96 psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f); in at32_wdt_stop()
97 wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55)); in at32_wdt_stop()
98 wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa)); in at32_wdt_stop()
111 wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) in at32_wdt_start()
114 wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) in at32_wdt_start()
/linux-4.4.14/Documentation/devicetree/bindings/leds/
Dleds-ktd2692.txt6 The ExpressWire interface through CTRL pin can control LED on/off and
10 Also, When the AUX pin is pulled high while CTRL pin is high,
15 - ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
/linux-4.4.14/drivers/net/ethernet/intel/e1000/
De1000_hw.c436 ctrl = er32(CTRL); in e1000_reset_hw()
440 ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); in e1000_reset_hw()
462 E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw()
471 ew32(CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw()
615 ctrl = er32(CTRL); in e1000_init_hw()
616 ew32(CTRL, ctrl | E1000_CTRL_PRIOR); in e1000_init_hw()
841 ctrl = er32(CTRL); in e1000_setup_fiber_serdes_link()
916 ew32(CTRL, ctrl); in e1000_setup_fiber_serdes_link()
930 (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { in e1000_setup_fiber_serdes_link()
1035 ctrl = er32(CTRL); in e1000_copper_link_preconfig()
[all …]
De1000_ethtool.c357 regs_buff[0] = er32(CTRL); in e1000_get_regs()
1165 ctrl_reg = er32(CTRL); in e1000_nonintegrated_phy_loopback()
1172 ew32(CTRL, ctrl_reg); in e1000_nonintegrated_phy_loopback()
1242 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1248 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1267 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
De1000_main.c706 u32 ctrl = er32(CTRL); in e1000_reset()
712 ew32(CTRL, ctrl); in e1000_reset()
2452 ctrl = er32(CTRL); in e1000_watchdog()
3299 regs_buff[0] = er32(CTRL); in e1000_regdump()
4885 ctrl = er32(CTRL); in __e1000_vlan_mode()
4893 ew32(CTRL, ctrl); in __e1000_vlan_mode()
5099 ctrl = er32(CTRL); in __e1000_shutdown()
5106 ew32(CTRL, ctrl); in __e1000_shutdown()
/linux-4.4.14/drivers/staging/sm750fb/
Dddk750_hwi2c.c125 FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START)); in hw_i2c_write_data()
188 FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START)); in hw_i2c_read_data()
/linux-4.4.14/Documentation/
DSAK.txt24 What key sequence should you use? Well, CTRL-ALT-DEL is used to reboot
25 the machine. CTRL-ALT-BACKSPACE is magical to the X server. We'll
26 choose CTRL-ALT-PAUSE.
Demail-clients.txt76 should appear, and then pressing CTRL-R let you specify the patch file
84 To insert a patch use Message->Insert File (CTRL+i) or an external editor.
Dxillybus.txt126 possibly pressing CTRL-C as some stage, even though the xillybus_* pipes have
/linux-4.4.14/sound/pci/ali5451/
Dali5451.c1000 unsigned int CTRL, in snd_ali_write_voice_regs() argument
1013 ((CTRL & 0x0000000f) << 12) | in snd_ali_write_voice_regs()
1061 unsigned int CTRL; in snd_ali_control_mode() local
1067 CTRL = 0x00000001; in snd_ali_control_mode()
1069 CTRL |= 0x00000008; /* 16-bit data */ in snd_ali_control_mode()
1071 CTRL |= 0x00000002; /* signed data */ in snd_ali_control_mode()
1073 CTRL |= 0x00000004; /* stereo data */ in snd_ali_control_mode()
1074 return CTRL; in snd_ali_control_mode()
1222 unsigned int CTRL; in snd_ali_playback_prepare() local
1261 CTRL = snd_ali_control_mode(substream); in snd_ali_playback_prepare()
[all …]
/linux-4.4.14/sound/pci/trident/
Dtrident_main.c454 ((voice->CTRL & 0x0000000f) << 12); in snd_trident_write_voice_regs()
593 outw((voice->CTRL << 12) | voice->Vol, in snd_trident_write_vol_reg()
764 unsigned int CTRL; in snd_trident_control_mode() local
770 CTRL = 0x00000001; in snd_trident_control_mode()
772 CTRL |= 0x00000008; // 16-bit data in snd_trident_control_mode()
774 CTRL |= 0x00000002; // signed data in snd_trident_control_mode()
776 CTRL |= 0x00000004; // stereo data in snd_trident_control_mode()
777 return CTRL; in snd_trident_control_mode()
969 voice->CTRL = snd_trident_control_mode(substream); in snd_trident_playback_prepare()
995 evoice->CTRL = voice->CTRL; in snd_trident_playback_prepare()
[all …]
Dtrident.h302 unsigned char CTRL; /* 4 bits */ member
/linux-4.4.14/drivers/net/ethernet/intel/igbvf/
Dvf.c132 ctrl = er32(CTRL); in e1000_reset_hw_vf()
133 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_vf()
Dethtool.c160 regs_buff[0] = er32(CTRL); in igbvf_get_regs()
/linux-4.4.14/include/linux/mtd/
Dfsmc.h36 #define CTRL 0x0 macro
/linux-4.4.14/tools/perf/ui/browsers/
Dheader.c67 case CTRL('c'): in list_menu__run()
Dmap.c91 case CTRL('c'): in map_browser__run()
Dhists.c1469 if ((err == 'q' || err == CTRL('c')) && he->branch_info) in do_annotate()
1979 case CTRL('c'): in perf_evsel__hists_browse()
2216 case CTRL('c'): in perf_evsel_menu__run()
2230 case CTRL('c'): in perf_evsel_menu__run()
Dannotate.c863 case CTRL('c'): in annotate_browser__run()
/linux-4.4.14/drivers/staging/rdma/hfi1/
Dpio.c730 write_kctxt_csr(dd, hw_context, SC(CTRL), reg); in sc_alloc()
855 write_kctxt_csr(dd, hw_context, SC(CTRL), 0); in sc_free()
883 reg = read_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL)); in sc_disable()
887 write_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL), reg); in sc_disable()
1186 sc_ctrl = read_kctxt_csr(dd, sc->hw_context, SC(CTRL)); in sc_enable()
1246 write_kctxt_csr(dd, sc->hw_context, SC(CTRL), sc_ctrl); in sc_enable()
1251 read_kctxt_csr(dd, sc->hw_context, SC(CTRL)); in sc_enable()
Duser_sdma.c1126 tidctrl = EXP_TID_GET(tidval, CTRL), in check_header_template()
1252 EXP_TID_GET(tidval, CTRL)); in set_txreq_header()
1339 val = cpu_to_le16(((EXP_TID_GET(tidval, CTRL) & 0x3) << 10) | in set_txreq_header_ahg()
Dsdma.c1630 write_sde_csr(sde, SD(CTRL), in sdma_sendctrl()
1634 write_sde_csr(sde, SD(CTRL), sde->p_senddmactrl); in sdma_sendctrl()
1779 sdma_dumpstate_helper(SD(CTRL)); in sdma_dumpstate()
1898 (unsigned long long)read_sde_csr(sde, SD(CTRL)), in sdma_seqfile_dump_sde()
Dfile_ops.c1752 EXP_TID_SET(CTRL, 1); in exp_tid_setup()
1756 EXP_TID_SET(CTRL, 2); in exp_tid_setup()
/linux-4.4.14/drivers/mtd/nand/
Datmel_nand.c904 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); in pmecc_enable()
905 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); in pmecc_enable()
915 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); in pmecc_enable()
916 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA); in pmecc_enable()
1000 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); in atmel_pmecc_core_init()
1001 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); in atmel_pmecc_core_init()
1053 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); in atmel_pmecc_core_init()
1794 nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_DISABLE); in nfc_select_chip()
1796 nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE); in nfc_select_chip()
2270 pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); in atmel_nand_probe()
[all …]
/linux-4.4.14/sound/atmel/
Dabdac.c249 dac_writel(dac, CTRL, DAC_BIT(EN)); in atmel_abdac_trigger()
256 dac_writel(dac, CTRL, 0); in atmel_abdac_trigger()
465 dac_writel(dac, CTRL, 0); in atmel_abdac_probe()
/linux-4.4.14/drivers/mmc/host/
Ddw_mmc.c433 temp = mci_readl(host, CTRL); in dw_mci_idmac_stop_dma()
436 mci_writel(host, CTRL, temp); in dw_mci_idmac_stop_dma()
584 temp = mci_readl(host, CTRL); in dw_mci_idmac_start_dma()
586 mci_writel(host, CTRL, temp); in dw_mci_idmac_start_dma()
979 temp = mci_readl(host, CTRL); in dw_mci_submit_data_dma()
981 mci_writel(host, CTRL, temp); in dw_mci_submit_data_dma()
1037 temp = mci_readl(host, CTRL); in dw_mci_submit_data()
1039 mci_writel(host, CTRL, temp); in dw_mci_submit_data()
2734 ctrl = mci_readl(host, CTRL); in dw_mci_ctrl_reset()
2736 mci_writel(host, CTRL, ctrl); in dw_mci_ctrl_reset()
[all …]
/linux-4.4.14/drivers/usb/gadget/udc/
Datmel_usba_udc.c979 ctrl = usba_readl(udc, CTRL); in usba_udc_wakeup()
980 usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); in usba_udc_wakeup()
1106 regval = usba_readl(udc, CTRL); in set_address()
1108 usba_writel(udc, CTRL, regval); in set_address()
1386 usba_writel(udc, CTRL, (usba_readl(udc, CTRL) in usba_control_irq()
1783 usba_writel(udc, CTRL, USBA_ENABLE_MASK); in usba_start()
1800 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in usba_stop()
2160 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in usba_udc_probe()
/linux-4.4.14/Documentation/zh_CN/
Demail-clients.txt76 当写邮件时，光标应该放在补丁会出现的地方，然后按下CTRL-R组合键，使指定的
/linux-4.4.14/Documentation/devicetree/bindings/arm/bcm/
Dbrcm,brcmstb.txt126 = Always-On control block (AON CTRL)
133 - reg : the register start and length for the AON CTRL block
/linux-4.4.14/tools/perf/ui/tui/
Dutil.c45 case CTRL('c'): in popup_menu__run()
/linux-4.4.14/Documentation/usb/
DURB.txt62 // (OUT) sometimes only part of CTRL/BULK/INTR transfer_buffer is used
65 // (IN) setup stage for CTRL (pass a struct usb_ctrlrequest)
90 you want to schedule. For CTRL/BULK/INT, use 0. The mem_flags parameter
/linux-4.4.14/Documentation/power/
Dvideo.txt73 to a virtual terminal and back to X using CTRL+ALT+F1 - CTRL+ALT+F7 to get
/linux-4.4.14/arch/arm/boot/dts/
Dste-hrefv60plus.dtsi115 /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
Dtegra30-colibri.dtsi243 /* SW CTRL: +V1.0_VDD_CPU */
Dtegra30-apalis.dtsi471 /* SW CTRL: +V1.0_VDD_CPU */
/linux-4.4.14/scripts/kconfig/
Dqconf.cc1386 quitAction->setShortcut(Qt::CTRL + Qt::Key_Q); in ConfigMainWindow()
1389 loadAction->setShortcut(Qt::CTRL + Qt::Key_L); in ConfigMainWindow()
1392 saveAction->setShortcut(Qt::CTRL + Qt::Key_S); in ConfigMainWindow()
1400 searchAction->setShortcut(Qt::CTRL + Qt::Key_F); in ConfigMainWindow()
/linux-4.4.14/drivers/regulator/
Dmax77802.c422 .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
/linux-4.4.14/drivers/staging/media/omap4iss/
Diss_ipipeif.c74 ISP5_PRINT_REGISTER(iss, CTRL); in ipipeif_print_status()
Diss.c47 ISS_PRINT_REGISTER(iss, CTRL); in iss_print_status()
Diss_csi2.c621 CSI2_PRINT_REGISTER(iss, csi2->regs1, CTRL); in csi2_print_status()
/linux-4.4.14/drivers/media/platform/omap3isp/
Dispccp2.c85 CCP2_PRINT_REGISTER(isp, CTRL); in ccp2_print_status()
Dispcsi2.c649 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL); in csi2_print_status()
Disp.c1685 ISP_PRINT_REGISTER(isp, CTRL); in omap3isp_print_status()
/linux-4.4.14/arch/cris/arch-v10/drivers/
DKconfig417 for CTRL and BULK traffic only, INTR traffic may work as well
/linux-4.4.14/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/
Dhub.fuc189 call(nv_wr32) // CTRL
/linux-4.4.14/Documentation/input/
Datarikbd.txt634 1D CTRL
/linux-4.4.14/drivers/s390/net/
Dqeth_core_main.c701 QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN); in qeth_check_idx_response()
2017 QETH_DBF_HEX(CTRL, 2, iob->data, QETH_DBF_CTRL_LEN); in qeth_prepare_control_data()
2079 QETH_DBF_HEX(CTRL, 2, iob->data, QETH_DBF_CTRL_LEN); in qeth_send_control_data()
Dqeth_l2_main.c526 QETH_DBF_HEX(CTRL, 3, hdr, QETH_DBF_CTRL_LEN); in qeth_l2_process_inbound_buffer()
Dqeth_l3_main.c1905 QETH_DBF_HEX(CTRL, 3, hdr, QETH_DBF_CTRL_LEN); in qeth_l3_process_inbound_buffer()
/linux-4.4.14/Documentation/virtual/uml/
DUserModeLinux-HOWTO.txt2425 # What to do when CTRL-ALT-DEL is pressed.