1/* 2 * max77802.c - Regulator driver for the Maxim 77802 3 * 4 * Copyright (C) 2013-2014 Google, Inc 5 * Simon Glass <sjg@chromium.org> 6 * 7 * Copyright (C) 2012 Samsung Electronics 8 * Chiwoong Byun <woong.byun@smasung.com> 9 * Jonghwa Lee <jonghwa3.lee@samsung.com> 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * This driver is based on max8997.c 22 */ 23 24#include <linux/kernel.h> 25#include <linux/bug.h> 26#include <linux/err.h> 27#include <linux/gpio.h> 28#include <linux/slab.h> 29#include <linux/gpio/consumer.h> 30#include <linux/module.h> 31#include <linux/platform_device.h> 32#include <linux/regulator/driver.h> 33#include <linux/regulator/machine.h> 34#include <linux/regulator/of_regulator.h> 35#include <linux/mfd/max77686.h> 36#include <linux/mfd/max77686-private.h> 37#include <dt-bindings/regulator/maxim,max77802.h> 38 39/* Default ramp delay in case it is not manually set */ 40#define MAX77802_RAMP_DELAY 100000 /* uV/us */ 41 42#define MAX77802_OPMODE_SHIFT_LDO 6 43#define MAX77802_OPMODE_BUCK234_SHIFT 4 44#define MAX77802_OPMODE_MASK 0x3 45 46#define MAX77802_VSEL_MASK 0x3F 47#define MAX77802_DVS_VSEL_MASK 0xFF 48 49#define MAX77802_RAMP_RATE_MASK_2BIT 0xC0 50#define MAX77802_RAMP_RATE_SHIFT_2BIT 6 51#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0 52#define MAX77802_RAMP_RATE_SHIFT_4BIT 4 53 54#define MAX77802_STATUS_OFF 0x0 55#define MAX77802_OFF_PWRREQ 0x1 56#define MAX77802_LP_PWRREQ 0x2 57 58/* MAX77802 has two register formats: 2-bit and 4-bit */ 59static const unsigned int ramp_table_77802_2bit[] = { 60 12500, 61 25000, 62 50000, 63 100000, 64}; 65 66static unsigned int ramp_table_77802_4bit[] = { 67 1000, 2000, 3030, 4000, 68 5000, 5880, 7140, 8330, 69 9090, 10000, 11110, 12500, 70 16670, 25000, 50000, 100000, 71}; 72 73struct max77802_regulator_prv { 74 /* Array indexed by regulator id */ 75 unsigned int opmode[MAX77802_REG_MAX]; 76}; 77 78static inline unsigned int max77802_map_mode(unsigned int mode) 79{ 80 return mode == MAX77802_OPMODE_NORMAL ? 81 REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY; 82} 83 84static int max77802_get_opmode_shift(int id) 85{ 86 if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 && 87 id <= MAX77802_BUCK10)) 88 return 0; 89 90 if (id >= MAX77802_BUCK2 && id <= MAX77802_BUCK4) 91 return MAX77802_OPMODE_BUCK234_SHIFT; 92 93 if (id >= MAX77802_LDO1 && id <= MAX77802_LDO35) 94 return MAX77802_OPMODE_SHIFT_LDO; 95 96 return -EINVAL; 97} 98 99/** 100 * max77802_set_suspend_disable - Disable the regulator during system suspend 101 * @rdev: regulator to mark as disabled 102 * 103 * All regulators expect LDO 1, 3, 20 and 21 support OFF by PWRREQ. 104 * Configure the regulator so the PMIC will turn it OFF during system suspend. 105 */ 106static int max77802_set_suspend_disable(struct regulator_dev *rdev) 107{ 108 unsigned int val = MAX77802_OFF_PWRREQ; 109 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 110 int id = rdev_get_id(rdev); 111 int shift = max77802_get_opmode_shift(id); 112 113 max77802->opmode[id] = val; 114 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 115 rdev->desc->enable_mask, val << shift); 116} 117 118/* 119 * Some LDOs support Low Power Mode while the system is running. 120 * 121 * LDOs 1, 3, 20, 21. 122 */ 123static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode) 124{ 125 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 126 int id = rdev_get_id(rdev); 127 unsigned int val; 128 int shift = max77802_get_opmode_shift(id); 129 130 switch (mode) { 131 case REGULATOR_MODE_STANDBY: 132 val = MAX77802_OPMODE_LP; /* ON in Low Power Mode */ 133 break; 134 case REGULATOR_MODE_NORMAL: 135 val = MAX77802_OPMODE_NORMAL; /* ON in Normal Mode */ 136 break; 137 default: 138 dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", 139 rdev->desc->name, mode); 140 return -EINVAL; 141 } 142 143 max77802->opmode[id] = val; 144 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 145 rdev->desc->enable_mask, val << shift); 146} 147 148static unsigned max77802_get_mode(struct regulator_dev *rdev) 149{ 150 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 151 int id = rdev_get_id(rdev); 152 153 return max77802_map_mode(max77802->opmode[id]); 154} 155 156/** 157 * max77802_set_suspend_mode - set regulator opmode when the system is suspended 158 * @rdev: regulator to change mode 159 * @mode: operating mode to be set 160 * 161 * Will set the operating mode for the regulators during system suspend. 162 * This function is valid for the three different enable control logics: 163 * 164 * Enable Control Logic1 by PWRREQ (BUCK 2-4 and LDOs 2, 4-19, 22-35) 165 * Enable Control Logic2 by PWRREQ (LDOs 1, 20, 21) 166 * Enable Control Logic3 by PWRREQ (LDO 3) 167 * 168 * If setting the regulator mode fails, the function only warns but does 169 * not return an error code to avoid the regulator core to stop setting 170 * the operating mode for the remaining regulators. 171 */ 172static int max77802_set_suspend_mode(struct regulator_dev *rdev, 173 unsigned int mode) 174{ 175 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 176 int id = rdev_get_id(rdev); 177 unsigned int val; 178 int shift = max77802_get_opmode_shift(id); 179 180 /* 181 * If the regulator has been disabled for suspend 182 * then is invalid to try setting a suspend mode. 183 */ 184 if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) { 185 dev_warn(&rdev->dev, "%s: is disabled, mode: 0x%x not set\n", 186 rdev->desc->name, mode); 187 return 0; 188 } 189 190 switch (mode) { 191 case REGULATOR_MODE_STANDBY: 192 /* 193 * If the regulator opmode is normal then enable 194 * ON in Low Power Mode by PWRREQ. If the mode is 195 * already Low Power then no action is required. 196 */ 197 if (max77802->opmode[id] == MAX77802_OPMODE_NORMAL) 198 val = MAX77802_LP_PWRREQ; 199 else 200 return 0; 201 break; 202 case REGULATOR_MODE_NORMAL: 203 /* 204 * If the regulator operating mode is Low Power then 205 * normal is not a valid opmode in suspend. If the 206 * mode is already normal then no action is required. 207 */ 208 if (max77802->opmode[id] == MAX77802_OPMODE_LP) 209 dev_warn(&rdev->dev, "%s: in Low Power: 0x%x invalid\n", 210 rdev->desc->name, mode); 211 return 0; 212 default: 213 dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", 214 rdev->desc->name, mode); 215 return -EINVAL; 216 } 217 218 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 219 rdev->desc->enable_mask, val << shift); 220} 221 222static int max77802_enable(struct regulator_dev *rdev) 223{ 224 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 225 int id = rdev_get_id(rdev); 226 int shift = max77802_get_opmode_shift(id); 227 228 if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) 229 max77802->opmode[id] = MAX77802_OPMODE_NORMAL; 230 231 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 232 rdev->desc->enable_mask, 233 max77802->opmode[id] << shift); 234} 235 236static int max77802_find_ramp_value(struct regulator_dev *rdev, 237 const unsigned int limits[], int size, 238 unsigned int ramp_delay) 239{ 240 int i; 241 242 for (i = 0; i < size; i++) { 243 if (ramp_delay <= limits[i]) 244 return i; 245 } 246 247 /* Use maximum value for no ramp control */ 248 dev_warn(&rdev->dev, "%s: ramp_delay: %d not supported, setting 100000\n", 249 rdev->desc->name, ramp_delay); 250 return size - 1; 251} 252 253/* Used for BUCKs 2-4 */ 254static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev, 255 int ramp_delay) 256{ 257 int id = rdev_get_id(rdev); 258 unsigned int ramp_value; 259 260 if (id > MAX77802_BUCK4) { 261 dev_warn(&rdev->dev, 262 "%s: regulator: ramp delay not supported\n", 263 rdev->desc->name); 264 return -EINVAL; 265 } 266 ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit, 267 ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay); 268 269 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 270 MAX77802_RAMP_RATE_MASK_2BIT, 271 ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT); 272} 273 274/* For BUCK1, 6 */ 275static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev, 276 int ramp_delay) 277{ 278 unsigned int ramp_value; 279 280 ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit, 281 ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay); 282 283 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 284 MAX77802_RAMP_RATE_MASK_4BIT, 285 ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT); 286} 287 288/* 289 * LDOs 2, 4-19, 22-35 290 */ 291static struct regulator_ops max77802_ldo_ops_logic1 = { 292 .list_voltage = regulator_list_voltage_linear, 293 .map_voltage = regulator_map_voltage_linear, 294 .is_enabled = regulator_is_enabled_regmap, 295 .enable = max77802_enable, 296 .disable = regulator_disable_regmap, 297 .get_voltage_sel = regulator_get_voltage_sel_regmap, 298 .set_voltage_sel = regulator_set_voltage_sel_regmap, 299 .set_voltage_time_sel = regulator_set_voltage_time_sel, 300 .set_suspend_disable = max77802_set_suspend_disable, 301 .set_suspend_mode = max77802_set_suspend_mode, 302}; 303 304/* 305 * LDOs 1, 20, 21, 3 306 */ 307static struct regulator_ops max77802_ldo_ops_logic2 = { 308 .list_voltage = regulator_list_voltage_linear, 309 .map_voltage = regulator_map_voltage_linear, 310 .is_enabled = regulator_is_enabled_regmap, 311 .enable = max77802_enable, 312 .disable = regulator_disable_regmap, 313 .get_voltage_sel = regulator_get_voltage_sel_regmap, 314 .set_voltage_sel = regulator_set_voltage_sel_regmap, 315 .set_voltage_time_sel = regulator_set_voltage_time_sel, 316 .set_mode = max77802_set_mode, 317 .get_mode = max77802_get_mode, 318 .set_suspend_mode = max77802_set_suspend_mode, 319}; 320 321/* BUCKS 1, 6 */ 322static struct regulator_ops max77802_buck_16_dvs_ops = { 323 .list_voltage = regulator_list_voltage_linear, 324 .map_voltage = regulator_map_voltage_linear, 325 .is_enabled = regulator_is_enabled_regmap, 326 .enable = max77802_enable, 327 .disable = regulator_disable_regmap, 328 .get_voltage_sel = regulator_get_voltage_sel_regmap, 329 .set_voltage_sel = regulator_set_voltage_sel_regmap, 330 .set_voltage_time_sel = regulator_set_voltage_time_sel, 331 .set_ramp_delay = max77802_set_ramp_delay_4bit, 332 .set_suspend_disable = max77802_set_suspend_disable, 333}; 334 335/* BUCKs 2-4 */ 336static struct regulator_ops max77802_buck_234_ops = { 337 .list_voltage = regulator_list_voltage_linear, 338 .map_voltage = regulator_map_voltage_linear, 339 .is_enabled = regulator_is_enabled_regmap, 340 .enable = max77802_enable, 341 .disable = regulator_disable_regmap, 342 .get_voltage_sel = regulator_get_voltage_sel_regmap, 343 .set_voltage_sel = regulator_set_voltage_sel_regmap, 344 .set_voltage_time_sel = regulator_set_voltage_time_sel, 345 .set_ramp_delay = max77802_set_ramp_delay_2bit, 346 .set_suspend_disable = max77802_set_suspend_disable, 347 .set_suspend_mode = max77802_set_suspend_mode, 348}; 349 350/* BUCKs 5, 7-10 */ 351static struct regulator_ops max77802_buck_dvs_ops = { 352 .list_voltage = regulator_list_voltage_linear, 353 .map_voltage = regulator_map_voltage_linear, 354 .is_enabled = regulator_is_enabled_regmap, 355 .enable = max77802_enable, 356 .disable = regulator_disable_regmap, 357 .get_voltage_sel = regulator_get_voltage_sel_regmap, 358 .set_voltage_sel = regulator_set_voltage_sel_regmap, 359 .set_voltage_time_sel = regulator_set_voltage_time_sel, 360 .set_ramp_delay = max77802_set_ramp_delay_2bit, 361 .set_suspend_disable = max77802_set_suspend_disable, 362}; 363 364/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */ 365#define regulator_77802_desc_p_ldo(num, supply, log) { \ 366 .name = "LDO"#num, \ 367 .of_match = of_match_ptr("LDO"#num), \ 368 .regulators_node = of_match_ptr("regulators"), \ 369 .id = MAX77802_LDO##num, \ 370 .supply_name = "inl"#supply, \ 371 .ops = &max77802_ldo_ops_logic##log, \ 372 .type = REGULATOR_VOLTAGE, \ 373 .owner = THIS_MODULE, \ 374 .min_uV = 800000, \ 375 .uV_step = 50000, \ 376 .ramp_delay = MAX77802_RAMP_DELAY, \ 377 .n_voltages = 1 << 6, \ 378 .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 379 .vsel_mask = MAX77802_VSEL_MASK, \ 380 .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 381 .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ 382 .of_map_mode = max77802_map_mode, \ 383} 384 385/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */ 386#define regulator_77802_desc_n_ldo(num, supply, log) { \ 387 .name = "LDO"#num, \ 388 .of_match = of_match_ptr("LDO"#num), \ 389 .regulators_node = of_match_ptr("regulators"), \ 390 .id = MAX77802_LDO##num, \ 391 .supply_name = "inl"#supply, \ 392 .ops = &max77802_ldo_ops_logic##log, \ 393 .type = REGULATOR_VOLTAGE, \ 394 .owner = THIS_MODULE, \ 395 .min_uV = 800000, \ 396 .uV_step = 25000, \ 397 .ramp_delay = MAX77802_RAMP_DELAY, \ 398 .n_voltages = 1 << 6, \ 399 .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 400 .vsel_mask = MAX77802_VSEL_MASK, \ 401 .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 402 .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ 403 .of_map_mode = max77802_map_mode, \ 404} 405 406/* BUCKs 1, 6 */ 407#define regulator_77802_desc_16_buck(num) { \ 408 .name = "BUCK"#num, \ 409 .of_match = of_match_ptr("BUCK"#num), \ 410 .regulators_node = of_match_ptr("regulators"), \ 411 .id = MAX77802_BUCK##num, \ 412 .supply_name = "inb"#num, \ 413 .ops = &max77802_buck_16_dvs_ops, \ 414 .type = REGULATOR_VOLTAGE, \ 415 .owner = THIS_MODULE, \ 416 .min_uV = 612500, \ 417 .uV_step = 6250, \ 418 .ramp_delay = MAX77802_RAMP_DELAY, \ 419 .n_voltages = 1 << 8, \ 420 .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ 421 .vsel_mask = MAX77802_DVS_VSEL_MASK, \ 422 .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \ 423 .enable_mask = MAX77802_OPMODE_MASK, \ 424 .of_map_mode = max77802_map_mode, \ 425} 426 427/* BUCKS 2-4 */ 428#define regulator_77802_desc_234_buck(num) { \ 429 .name = "BUCK"#num, \ 430 .of_match = of_match_ptr("BUCK"#num), \ 431 .regulators_node = of_match_ptr("regulators"), \ 432 .id = MAX77802_BUCK##num, \ 433 .supply_name = "inb"#num, \ 434 .ops = &max77802_buck_234_ops, \ 435 .type = REGULATOR_VOLTAGE, \ 436 .owner = THIS_MODULE, \ 437 .min_uV = 600000, \ 438 .uV_step = 6250, \ 439 .ramp_delay = MAX77802_RAMP_DELAY, \ 440 .n_voltages = 0x91, \ 441 .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ 442 .vsel_mask = MAX77802_DVS_VSEL_MASK, \ 443 .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \ 444 .enable_mask = MAX77802_OPMODE_MASK << \ 445 MAX77802_OPMODE_BUCK234_SHIFT, \ 446 .of_map_mode = max77802_map_mode, \ 447} 448 449/* BUCK 5 */ 450#define regulator_77802_desc_buck5(num) { \ 451 .name = "BUCK"#num, \ 452 .of_match = of_match_ptr("BUCK"#num), \ 453 .regulators_node = of_match_ptr("regulators"), \ 454 .id = MAX77802_BUCK##num, \ 455 .supply_name = "inb"#num, \ 456 .ops = &max77802_buck_dvs_ops, \ 457 .type = REGULATOR_VOLTAGE, \ 458 .owner = THIS_MODULE, \ 459 .min_uV = 750000, \ 460 .uV_step = 50000, \ 461 .ramp_delay = MAX77802_RAMP_DELAY, \ 462 .n_voltages = 1 << 6, \ 463 .vsel_reg = MAX77802_REG_BUCK5OUT, \ 464 .vsel_mask = MAX77802_VSEL_MASK, \ 465 .enable_reg = MAX77802_REG_BUCK5CTRL, \ 466 .enable_mask = MAX77802_OPMODE_MASK, \ 467 .of_map_mode = max77802_map_mode, \ 468} 469 470/* BUCKs 7-10 */ 471#define regulator_77802_desc_buck7_10(num) { \ 472 .name = "BUCK"#num, \ 473 .of_match = of_match_ptr("BUCK"#num), \ 474 .regulators_node = of_match_ptr("regulators"), \ 475 .id = MAX77802_BUCK##num, \ 476 .supply_name = "inb"#num, \ 477 .ops = &max77802_buck_dvs_ops, \ 478 .type = REGULATOR_VOLTAGE, \ 479 .owner = THIS_MODULE, \ 480 .min_uV = 750000, \ 481 .uV_step = 50000, \ 482 .ramp_delay = MAX77802_RAMP_DELAY, \ 483 .n_voltages = 1 << 6, \ 484 .vsel_reg = MAX77802_REG_BUCK7OUT + (num - 7) * 3, \ 485 .vsel_mask = MAX77802_VSEL_MASK, \ 486 .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \ 487 .enable_mask = MAX77802_OPMODE_MASK, \ 488 .of_map_mode = max77802_map_mode, \ 489} 490 491static const struct regulator_desc regulators[] = { 492 regulator_77802_desc_16_buck(1), 493 regulator_77802_desc_234_buck(2), 494 regulator_77802_desc_234_buck(3), 495 regulator_77802_desc_234_buck(4), 496 regulator_77802_desc_buck5(5), 497 regulator_77802_desc_16_buck(6), 498 regulator_77802_desc_buck7_10(7), 499 regulator_77802_desc_buck7_10(8), 500 regulator_77802_desc_buck7_10(9), 501 regulator_77802_desc_buck7_10(10), 502 regulator_77802_desc_n_ldo(1, 10, 2), 503 regulator_77802_desc_n_ldo(2, 10, 1), 504 regulator_77802_desc_p_ldo(3, 3, 2), 505 regulator_77802_desc_p_ldo(4, 6, 1), 506 regulator_77802_desc_p_ldo(5, 3, 1), 507 regulator_77802_desc_p_ldo(6, 3, 1), 508 regulator_77802_desc_p_ldo(7, 3, 1), 509 regulator_77802_desc_n_ldo(8, 1, 1), 510 regulator_77802_desc_p_ldo(9, 5, 1), 511 regulator_77802_desc_p_ldo(10, 4, 1), 512 regulator_77802_desc_p_ldo(11, 4, 1), 513 regulator_77802_desc_p_ldo(12, 9, 1), 514 regulator_77802_desc_p_ldo(13, 4, 1), 515 regulator_77802_desc_p_ldo(14, 4, 1), 516 regulator_77802_desc_n_ldo(15, 1, 1), 517 regulator_77802_desc_n_ldo(17, 2, 1), 518 regulator_77802_desc_p_ldo(18, 7, 1), 519 regulator_77802_desc_p_ldo(19, 5, 1), 520 regulator_77802_desc_p_ldo(20, 7, 2), 521 regulator_77802_desc_p_ldo(21, 6, 2), 522 regulator_77802_desc_p_ldo(23, 9, 1), 523 regulator_77802_desc_p_ldo(24, 6, 1), 524 regulator_77802_desc_p_ldo(25, 9, 1), 525 regulator_77802_desc_p_ldo(26, 9, 1), 526 regulator_77802_desc_n_ldo(27, 2, 1), 527 regulator_77802_desc_p_ldo(28, 7, 1), 528 regulator_77802_desc_p_ldo(29, 7, 1), 529 regulator_77802_desc_n_ldo(30, 2, 1), 530 regulator_77802_desc_p_ldo(32, 9, 1), 531 regulator_77802_desc_p_ldo(33, 6, 1), 532 regulator_77802_desc_p_ldo(34, 9, 1), 533 regulator_77802_desc_n_ldo(35, 2, 1), 534}; 535 536static int max77802_pmic_probe(struct platform_device *pdev) 537{ 538 struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); 539 struct max77802_regulator_prv *max77802; 540 int i, val; 541 struct regulator_config config = { }; 542 543 max77802 = devm_kzalloc(&pdev->dev, 544 sizeof(struct max77802_regulator_prv), 545 GFP_KERNEL); 546 if (!max77802) 547 return -ENOMEM; 548 549 config.dev = iodev->dev; 550 config.regmap = iodev->regmap; 551 config.driver_data = max77802; 552 platform_set_drvdata(pdev, max77802); 553 554 for (i = 0; i < MAX77802_REG_MAX; i++) { 555 struct regulator_dev *rdev; 556 int id = regulators[i].id; 557 int shift = max77802_get_opmode_shift(id); 558 int ret; 559 560 ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val); 561 if (ret < 0) { 562 dev_warn(&pdev->dev, 563 "cannot read current mode for %d\n", i); 564 val = MAX77802_OPMODE_NORMAL; 565 } else { 566 val = val >> shift & MAX77802_OPMODE_MASK; 567 } 568 569 /* 570 * If the regulator is disabled and the system warm rebooted, 571 * the hardware reports OFF as the regulator operating mode. 572 * Default to operating mode NORMAL in that case. 573 */ 574 if (val == MAX77802_STATUS_OFF) 575 max77802->opmode[id] = MAX77802_OPMODE_NORMAL; 576 else 577 max77802->opmode[id] = val; 578 579 rdev = devm_regulator_register(&pdev->dev, 580 ®ulators[i], &config); 581 if (IS_ERR(rdev)) { 582 ret = PTR_ERR(rdev); 583 dev_err(&pdev->dev, 584 "regulator init failed for %d: %d\n", i, ret); 585 return ret; 586 } 587 } 588 589 return 0; 590} 591 592static const struct platform_device_id max77802_pmic_id[] = { 593 {"max77802-pmic", 0}, 594 { }, 595}; 596MODULE_DEVICE_TABLE(platform, max77802_pmic_id); 597 598static struct platform_driver max77802_pmic_driver = { 599 .driver = { 600 .name = "max77802-pmic", 601 }, 602 .probe = max77802_pmic_probe, 603 .id_table = max77802_pmic_id, 604}; 605 606module_platform_driver(max77802_pmic_driver); 607 608MODULE_DESCRIPTION("MAXIM 77802 Regulator Driver"); 609MODULE_AUTHOR("Simon Glass <sjg@chromium.org>"); 610MODULE_LICENSE("GPL"); 611