single (reference) in projects: linux-4.1.27

Searched refs:single (Results 1 – 200 of 933) sorted by relevance

/linux-4.1.27/arch/arm/boot/dts/
D	hi3620-hi4511.dts	`72 pinctrl-single,pins = < 78 pinctrl-single,pins = < 84 pinctrl-single,pins = < 90 pinctrl-single,pins = < 96 pinctrl-single,pins = < 102 pinctrl-single,pins = < 108 pinctrl-single,pins = < 114 pinctrl-single,pins = < 120 pinctrl-single,pins = < 126 pinctrl-single,pins = < [all …]`
D	da850.dtsi	`35 compatible = "pinctrl-single"; 39 pinctrl-single,bit-per-mux; 40 pinctrl-single,register-width = <32>; 41 pinctrl-single,function-mask = <0xf>; 45 pinctrl-single,bits = < 61 pinctrl-single,bits = < 67 pinctrl-single,bits = < 76 pinctrl-single,bits = < 82 pinctrl-single,bits = < 88 pinctrl-single,bits = < [all …]`
D	omap3-ha-common.dtsi	`24 pinctrl-single,pins = < 30 pinctrl-single,pins = < 36 pinctrl-single,pins = < 42 pinctrl-single,pins = < 48 pinctrl-single,pins = < 54 pinctrl-single,pins = < 60 pinctrl-single,pins = < 69 pinctrl-single,pins = <`
D	omap4-var-om44customboard.dtsi	`67 pinctrl-single,pins = < 76 pinctrl-single,pins = < 85 pinctrl-single,pins = < 91 pinctrl-single,pins = < 124 pinctrl-single,pins = < 132 pinctrl-single,pins = < 139 pinctrl-single,pins = < 151 pinctrl-single,pins = < 158 pinctrl-single,pins = < 164 pinctrl-single,pins = < [all …]`
D	omap3-cm-t3517.dts	`46 pinctrl-single,pins = < 56 pinctrl-single,pins = < 62 pinctrl-single,pins = < 68 pinctrl-single,pins = < 74 pinctrl-single,pins = < 85 pinctrl-single,pins = < 92 pinctrl-single,pins = <`
D	omap4-var-som-om44.dtsi	`70 pinctrl-single,pins = < 77 pinctrl-single,pins = < 87 pinctrl-single,pins = < 94 pinctrl-single,pins = < 103 pinctrl-single,pins = < 120 pinctrl-single,pins = < 126 pinctrl-single,pins = < 133 pinctrl-single,pins = < 140 pinctrl-single,pins = < 159 pinctrl-single,pins = < [all …]`
D	am437x-idk-evm.dts	`117 pinctrl-single,pins = < 123 pinctrl-single,pins = < 130 pinctrl-single,pins = < 137 pinctrl-single,pins = < 144 pinctrl-single,pins = < 151 pinctrl-single,pins = < 163 pinctrl-single,pins = < 175 pinctrl-single,pins = < 181 pinctrl-single,pins = < 198 pinctrl-single,pins = < [all …]`
D	omap3-zoom3.dts	`56 pinctrl-single,pins = < 67 pinctrl-single,pins = < 82 pinctrl-single,pins = < 89 pinctrl-single,pins = < 98 pinctrl-single,pins = < 107 pinctrl-single,pins = < 117 pinctrl-single,pins = < 125 pinctrl-single,pins = < 137 pinctrl-single,pins = <`
D	omap5-uevm.dts	`153 pinctrl-single,pins = < 159 pinctrl-single,pins = < 169 pinctrl-single,pins = < 178 pinctrl-single,pins = < 187 pinctrl-single,pins = < 194 pinctrl-single,pins = < 201 pinctrl-single,pins = < 210 pinctrl-single,pins = < 219 pinctrl-single,pins = < 230 pinctrl-single,pins = < [all …]`
D	omap4-duovero.dtsi	`74 pinctrl-single,pins = < 81 pinctrl-single,pins = < 91 pinctrl-single,pins = < 100 pinctrl-single,pins = < 117 pinctrl-single,pins = < 123 pinctrl-single,pins = < 130 pinctrl-single,pins = < 137 pinctrl-single,pins = < 144 pinctrl-single,pins = < 155 pinctrl-single,pins = <`
D	omap4-panda-common.dtsi	`201 pinctrl-single,pins = < 208 pinctrl-single,pins = < 218 pinctrl-single,pins = < 227 pinctrl-single,pins = < 262 pinctrl-single,pins = < 268 pinctrl-single,pins = < 276 pinctrl-single,pins = < 284 pinctrl-single,pins = < 301 pinctrl-single,pins = < 308 pinctrl-single,pins = < [all …]`
D	omap3-lilly-a83x.dtsi	`61 pinctrl-single,pins = < 67 pinctrl-single,pins = < 73 pinctrl-single,pins = < 83 pinctrl-single,pins = < 92 pinctrl-single,pins = < 99 pinctrl-single,pins = < 106 pinctrl-single,pins = < 113 pinctrl-single,pins = < 120 pinctrl-single,pins = < 127 pinctrl-single,pins = < [all …]`
D	omap3-igep.dtsi	`37 pinctrl-single,pins = < 44 pinctrl-single,pins = < 51 pinctrl-single,pins = < 60 pinctrl-single,pins = < 71 pinctrl-single,pins = < 82 pinctrl-single,pins = < 88 pinctrl-single,pins = < 95 pinctrl-single,pins = <`
D	dra7-evm.dts	`56 pinctrl-single,pins = < 62 pinctrl-single,pins = < 69 pinctrl-single,pins = < 76 pinctrl-single,pins = < 83 pinctrl-single,pins = < 94 pinctrl-single,pins = < 103 pinctrl-single,pins = < 112 pinctrl-single,pins = < 121 pinctrl-single,pins = < 128 pinctrl-single,pins = < [all …]`
D	am335x-evm.dts	`142 pinctrl-single,pins = < 152 pinctrl-single,pins = < 159 pinctrl-single,pins = < 166 pinctrl-single,pins = < 173 pinctrl-single,pins = < 180 pinctrl-single,pins = < 186 pinctrl-single,pins = < 206 pinctrl-single,pins = < 212 pinctrl-single,pins = < 230 pinctrl-single,pins = < [all …]`
D	am57xx-beagle-x15.dts	`110 pinctrl-single,pins = < 119 pinctrl-single,pins = < 126 pinctrl-single,pins = < 133 pinctrl-single,pins = < 140 pinctrl-single,pins = < 152 pinctrl-single,pins = < 167 pinctrl-single,pins = < 200 pinctrl-single,pins = < 232 pinctrl-single,pins = < 240 pinctrl-single,pins = < [all …]`
D	omap3-overo-common-peripherals.dtsi	`31 pinctrl-single,pins = < 38 pinctrl-single,pins = < 63 st,click-single-x; 64 st,click-single-y; 65 st,click-single-z;`
D	omap4-sdp.dts	`214 pinctrl-single,pins = < 223 pinctrl-single,pins = < 232 pinctrl-single,pins = < 239 pinctrl-single,pins = < 246 pinctrl-single,pins = < 256 pinctrl-single,pins = < 265 pinctrl-single,pins = < 274 pinctrl-single,pins = < 283 pinctrl-single,pins = < 292 pinctrl-single,pins = < [all …]`
D	am437x-sk-evm.dts	`137 pinctrl-single,pins = < 146 pinctrl-single,pins = < 155 pinctrl-single,pins = < 162 pinctrl-single,pins = < 169 pinctrl-single,pins = < 181 pinctrl-single,pins = < 187 pinctrl-single,pins = < 194 pinctrl-single,pins = < 214 pinctrl-single,pins = < 234 pinctrl-single,pins = < [all …]`
D	am335x-evmsk.dts	`194 pinctrl-single,pins = < 227 pinctrl-single,pins = < 261 pinctrl-single,pins = < 270 pinctrl-single,pins = < 279 pinctrl-single,pins = < 286 pinctrl-single,pins = < 293 pinctrl-single,pins = < 299 pinctrl-single,pins = < 305 pinctrl-single,pins = < 337 pinctrl-single,pins = < [all …]`
D	am335x-bone-common.dtsi	`69 pinctrl-single,pins = < 78 pinctrl-single,pins = < 85 pinctrl-single,pins = < 92 pinctrl-single,pins = < 98 pinctrl-single,pins = < 117 pinctrl-single,pins = < 136 pinctrl-single,pins = < 144 pinctrl-single,pins = < 152 pinctrl-single,pins = < 158 pinctrl-single,pins = <`
D	am335x-pepper.dts	`94 pinctrl-single,pins = < 100 pinctrl-single,pins = < 131 pinctrl-single,pins = < 178 pinctrl-single,pins = < 229 pinctrl-single,pins = < 292 pinctrl-single,pins = < 313 pinctrl-single,pins = < 364 pinctrl-single,pins = < 375 pinctrl-single,pins = < 391 pinctrl-single,pins = < [all …]`
D	am437x-gp-evm.dts	`113 pinctrl-single,pins = < 120 pinctrl-single,pins = < 127 pinctrl-single,pins = < 133 pinctrl-single,pins = < 139 pinctrl-single,pins = < 145 pinctrl-single,pins = < 163 pinctrl-single,pins = < 181 pinctrl-single,pins = < 189 pinctrl-single,pins = < 197 pinctrl-single,pins = < [all …]`
D	am43x-epos-evm.dts	`115 pinctrl-single,pins = < 130 pinctrl-single,pins = < 145 pinctrl-single,pins = < 153 pinctrl-single,pins = < 161 pinctrl-single,pins = < 168 pinctrl-single,pins = < 189 pinctrl-single,pins = < 195 pinctrl-single,pins = < 202 pinctrl-single,pins = < 211 pinctrl-single,pins = < [all …]`
D	omap4-duovero-parlor.dts	`67 pinctrl-single,pins = < 73 pinctrl-single,pins = < 79 pinctrl-single,pins = < 86 pinctrl-single,pins = < 93 pinctrl-single,pins = < 101 pinctrl-single,pins = <`
D	omap3-cm-t3x.dtsi	`75 pinctrl-single,pins = < 82 pinctrl-single,pins = < 93 pinctrl-single,pins = < 99 pinctrl-single,pins = < 127 pinctrl-single,pins = < 138 pinctrl-single,pins = < 144 pinctrl-single,pins = < 153 pinctrl-single,pins = < 160 pinctrl-single,pins = <`
D	am335x-chilisom.dtsi	`31 pinctrl-single,pins = < 38 pinctrl-single,pins = < 45 pinctrl-single,pins = < 59 pinctrl-single,pins = < 74 pinctrl-single,pins = < 83 pinctrl-single,pins = < 91 pinctrl-single,pins = <`
D	omap3-evm-37xx.dts	`39 pinctrl-single,pins = < 68 pinctrl-single,pins = < 84 pinctrl-single,pins = < 95 pinctrl-single,pins = < 102 pinctrl-single,pins = < 109 pinctrl-single,pins = < 117 pinctrl-single,pins = <`
D	dra72-evm.dts	`42 pinctrl-single,pins = < 49 pinctrl-single,pins = < 76 pinctrl-single,pins = < 82 pinctrl-single,pins = < 88 pinctrl-single,pins = < 94 pinctrl-single,pins = < 106 pinctrl-single,pins = < 121 pinctrl-single,pins = < 128 pinctrl-single,pins = < 135 pinctrl-single,pins = < [all …]`
D	omap3-tao3530.dtsi	`73 pinctrl-single,pins = < 90 pinctrl-single,pins = < 105 pinctrl-single,pins = < 117 pinctrl-single,pins = < 123 pinctrl-single,pins = < 130 pinctrl-single,pins = < 137 pinctrl-single,pins = < 146 pinctrl-single,pins = < 155 pinctrl-single,pins = <`
D	am335x-lxm.dts	`48 pinctrl-single,pins = < 59 pinctrl-single,pins = < 66 pinctrl-single,pins = < 92 pinctrl-single,pins = < 118 pinctrl-single,pins = < 126 pinctrl-single,pins = < 134 pinctrl-single,pins = < 149 pinctrl-single,pins = <`
D	omap5-cm-t54.dts	`177 pinctrl-single,pins = < 191 pinctrl-single,pins = < 197 pinctrl-single,pins = < 204 pinctrl-single,pins = < 211 pinctrl-single,pins = < 222 pinctrl-single,pins = < 237 pinctrl-single,pins = < 248 pinctrl-single,pins = < 255 pinctrl-single,pins = < 268 pinctrl-single,pins = < [all …]`
D	omap34xx.dtsi	`33 compatible = "ti,omap3-padconf", "pinctrl-single"; 39 pinctrl-single,register-width = <16>; 40 pinctrl-single,function-mask = <0xff1f>;`
D	omap3-gta04a3.dts	`26 st,click-single-x; 27 st,click-single-y; 28 st,click-single-z;`
D	am335x-nano.dts	`43 pinctrl-single,pins = < 49 pinctrl-single,pins = < 93 pinctrl-single,pins = < 100 pinctrl-single,pins = < 107 pinctrl-single,pins = < 116 pinctrl-single,pins = < 125 pinctrl-single,pins = < 134 pinctrl-single,pins = < 143 pinctrl-single,pins = < 150 pinctrl-single,pins = <`
D	omap3-sb-t35.dtsi	`60 pinctrl-single,pins = < 67 pinctrl-single,pins = < 73 pinctrl-single,pins = < 80 pinctrl-single,pins = <`
D	omap3-overo-common-lcd35.dtsi	`15 pinctrl-single,pins = < 48 pinctrl-single,pins = < 54 pinctrl-single,pins = < 60 pinctrl-single,pins = < 69 pinctrl-single,pins = <`
D	omap3-ha-lcd.dts	`31 pinctrl-single,pins = < 37 pinctrl-single,pins = < 43 pinctrl-single,pins = < 76 pinctrl-single,pins = < 82 pinctrl-single,pins = <`
D	omap4-panda-es.dts	`36 pinctrl-single,pins = < 45 pinctrl-single,pins = < 52 pinctrl-single,pins = <`
D	omap3-lilly-dbb056.dts	`32 pinctrl-single,pins = < 38 pinctrl-single,pins = < 44 pinctrl-single,pins = < 50 pinctrl-single,pins = < 77 pinctrl-single,pins = < 94 pinctrl-single,pins = <`
D	omap3-overo-base.dtsi	`90 pinctrl-single,pins = < 99 pinctrl-single,pins = < 106 pinctrl-single,pins = < 117 pinctrl-single,pins = < 129 pinctrl-single,pins = < 136 pinctrl-single,pins = <`
D	omap3-pandora-600mhz.dts	`34 pinctrl-single,pins = < 45 pinctrl-single,pins = < 56 pinctrl-single,pins = <`
D	omap3-overo-common-lcd43.dtsi	`15 pinctrl-single,pins = < 48 pinctrl-single,pins = < 54 pinctrl-single,pins = < 60 pinctrl-single,pins = < 69 pinctrl-single,pins = <`
D	omap4-var-som-om44-wlan.dtsi	`26 pinctrl-single,pins = < 35 pinctrl-single,pins = < 43 pinctrl-single,pins = <`
D	omap3-n900.dts	`151 pinctrl-single,pins = < 158 pinctrl-single,pins = < 165 pinctrl-single,pins = < 173 pinctrl-single,pins = < 200 pinctrl-single,pins = < 207 pinctrl-single,pins = < 214 pinctrl-single,pins = < 221 pinctrl-single,pins = < 227 pinctrl-single,pins = < 236 pinctrl-single,pins = < [all …]`
D	omap3-pandora-1ghz.dts	`34 pinctrl-single,pins = < 45 pinctrl-single,pins = < 56 pinctrl-single,pins = <`
D	am335x-chiliboard.dts	`39 pinctrl-single,pins = < 45 pinctrl-single,pins = < 57 pinctrl-single,pins = <`
D	omap3-cm-t3730.dts	`36 pinctrl-single,pins = < 50 pinctrl-single,pins = < 61 pinctrl-single,pins = <`
D	am335x-base0033.dts	`48 pinctrl-single,pins = < 73 pinctrl-single,pins = < 79 pinctrl-single,pins = <`
D	dm8168-evm.dts	`31 pinctrl-single,pins = < 40 pinctrl-single,pins = < 54 pinctrl-single,pins = < 60 pinctrl-single,pins = <`
D	omap3-igep0020-common.dtsi	`113 pinctrl-single,pins = < 119 pinctrl-single,pins = < 152 pinctrl-single,pins = < 168 pinctrl-single,pins = < 185 pinctrl-single,pins = <`
D	omap5-sbc-t54.dts	`14 pinctrl-single,pins = < 21 pinctrl-single,pins = <`
D	omap3-overo-storm.dtsi	`19 pinctrl-single,pins = < 30 pinctrl-single,pins = <`
D	omap36xx.dtsi	`65 compatible = "ti,omap3-padconf", "pinctrl-single"; 71 pinctrl-single,register-width = <16>; 72 pinctrl-single,function-mask = <0xff1f>;`
D	twl6030_omap4.dtsi	`26 pinctrl-single,pins = < 34 pinctrl-single,pins = <`
D	omap3-overo-palo43.dts	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap3-overo-gallop43.dts	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap3-overo-chestnut43.dts	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap3-overo.dtsi	`19 pinctrl-single,pins = < 30 pinctrl-single,pins = <`
D	omap3-beagle-xm.dts	`178 pinctrl-single,pins = < 184 pinctrl-single,pins = < 202 pinctrl-single,pins = < 209 pinctrl-single,pins = < 220 pinctrl-single,pins = < 256 pinctrl-single,pins = <`
D	omap3-overo-storm-gallop43.dts	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap3-overo-storm-palo43.dts	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap3-overo-storm-chestnut43.dts	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap3-gta04.dtsi	`129 pinctrl-single,pins = < 140 pinctrl-single,pins = < 147 pinctrl-single,pins = < 154 pinctrl-single,pins = < 161 pinctrl-single,pins = < 172 pinctrl-single,pins = < 212 pinctrl-single,pins = < 223 pinctrl-single,pins = <`
D	twl4030_omap3.dtsi	`21 pinctrl-single,pins = < 35 pinctrl-single,pins = <`
D	omap3-igep0030-common.dtsi	`40 pinctrl-single,pins = < 51 pinctrl-single,pins = <`
D	omap3-sbc-t3517.dts	`39 pinctrl-single,pins = < 46 pinctrl-single,pins = <`
D	omap3-beagle.dts	`173 pinctrl-single,pins = < 186 pinctrl-single,pins = < 197 pinctrl-single,pins = < 204 pinctrl-single,pins = < 210 pinctrl-single,pins = < 250 pinctrl-single,pins = <`
D	omap3-thunder.dts	`19 pinctrl-single,pins = < 52 pinctrl-single,pins = < 58 pinctrl-single,pins = <`
D	omap3-overo-alto35-common.dtsi	`58 pinctrl-single,pins = < 69 pinctrl-single,pins = <`
D	omap3-igep0030-rev-g.dts	`31 pinctrl-single,pins = < 39 pinctrl-single,pins = <`
D	am335x-igep0033.dtsi	`58 pinctrl-single,pins = < 65 pinctrl-single,pins = < 85 pinctrl-single,pins = < 92 pinctrl-single,pins = <`
D	omap3-igep0020.dts	`42 pinctrl-single,pins = < 50 pinctrl-single,pins = <`
D	omap2420.dtsi	`45 "pinctrl-single"; 49 pinctrl-single,register-width = <8>; 50 pinctrl-single,function-mask = <0x3f>;`
D	hi3620.dtsi	`536 compatible = "pinctrl-single"; 543 pinctrl-single,register-width = <32>; 544 pinctrl-single,function-mask = <7>; 546 pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 552 #pinctrl-single,gpio-range-cells = <3>; 557 compatible = "pinconf-single"; 563 pinctrl-single,register-width = <32>;`
D	omap3-pandora-common.dtsi	`207 pinctrl-single,pins = < 218 pinctrl-single,pins = < 233 pinctrl-single,pins = < 267 pinctrl-single,pins = < 274 pinctrl-single,pins = < 283 pinctrl-single,pins = < 305 pinctrl-single,pins = <`
D	am335x-boneblack.dts	`38 pinctrl-single,pins = < 63 pinctrl-single,pins = <`
D	omap3-cm-t3x30.dtsi	`25 pinctrl-single,pins = < 32 pinctrl-single,pins = <`
D	omap4-sdp-es23plus.dts	`12 pinctrl-single,pins = <`
D	omap4-panda-a4.dts	`15 pinctrl-single,pins = <`
D	omap3-overo-summit.dts	`25 pinctrl-single,pins = <`
D	omap3-overo-storm-summit.dts	`25 pinctrl-single,pins = <`
D	omap3-sbc-t3730.dts	`23 pinctrl-single,pins = <`
D	omap2430.dtsi	`45 "pinctrl-single"; 49 pinctrl-single,register-width = <8>; 50 pinctrl-single,function-mask = <0x3f>;`
D	omap3-ldp.dts	`226 pinctrl-single,pins = < 240 pinctrl-single,pins = < 257 pinctrl-single,pins = <`
D	omap3-sbc-t3530.dts	`23 pinctrl-single,pins = <`
/linux-4.1.27/Documentation/devicetree/bindings/pinctrl/
D	pinctrl-single.txt	4 - compatible : "pinctrl-single" or "pinconf-single". 5 "pinctrl-single" means that pinconf isn't supported. 6 "pinconf-single" means that generic pinconf is supported. 10 - pinctrl-single,register-width : pinmux register access width in bits 12 - pinctrl-single,function-mask : mask of allowed pinmux function bits 16 - pinctrl-single,function-off : function off mode for disabled state if 20 - pinctrl-single,bit-per-mux : boolean to indicate that one register controls 21 more than one pin, for which "pinctrl-single,function-mask" property specifies 24 - pinctrl-single,drive-strength : array of value that are used to configure 29 pinctrl-single,power-source = <0x30 0xf0>; [all …]
D	ti,omap-pinctrl.txt	`13 See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details.`
/linux-4.1.27/arch/mips/kernel/
D	elf.c	`44 bool single; member 174 prog_req.single = interp_req.single && prog_req.single; in arch_check_elf() 207 (prog_req.single && !prog_req.frdefault)) in arch_check_elf() 215 !prog_req.fr1 && !prog_req.single && !prog_req.soft) in arch_check_elf()`
/linux-4.1.27/Documentation/hwmon/
D	pcf8591	`24 The PCF8591 has 4 analog inputs programmable as single-ended or 26 - mode 0 : four single ended inputs 27 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3 33 - mode 2 : single ended and differential mixed 34 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1 52 0 = four single ended inputs 54 2 = single ended and differential mixed 81 from 0 to 255 for single ended inputs and -128 to +127 for differential inputs`
D	ads7828	`27 set to true for differential mode, false for default single ended mode. 38 If no structure is provided, the configuration defaults to single ended 49 It can operate in single ended mode (8 +ve inputs) or in differential mode,`
/linux-4.1.27/Documentation/devicetree/bindings/misc/
D	lis302.txt	`23 - st,click-single-{x,y,z}: if present, tells the device to issue an 24 interrupt on single click events on the 74 st,click-single-x; 75 st,click-single-y; 76 st,click-single-z; 98 st,click-single-x; 99 st,click-single-y; 100 st,click-single-z;`
D	arm-charlcd.txt	`11 - interrupts - single interrupt for character LCD. The character LCD can`
/linux-4.1.27/Documentation/scsi/
D	bfa.txt	`16 1657:0017:1657:0014 415 4Gbps single port FC HBA 17 1657:0017:1657:0014 815 8Gbps single port FC HBA 18 1657:0017:103c:1741 HP 41B 4Gbps single port FC HBA 19 1657:0017:103c 1743 HP 81B 8Gbps single port FC HBA 22 1657:0014:1657:0014 1010 10Gbps single port CNA - FCOE`
/linux-4.1.27/Documentation/devicetree/bindings/arm/omap/
D	ctrl.txt	`11 [1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt 45 "pinctrl-single"; 51 pinctrl-single,register-width = <16>; 52 pinctrl-single,function-mask = <0xff1f>;`
/linux-4.1.27/Documentation/fb/
D	viafb.txt	63 0 : Resolution: 640x480, Channel: single, Dithering: Enable 64 1 : Resolution: 800x600, Channel: single, Dithering: Enable 65 2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default) 66 3 : Resolution: 1280x768, Channel: single, Dithering: Enable 71 8 : Resolution: 800x480, Channel: single, Dithering: Enable 73 10: Resolution: 1024x768, Channel: single, Dithering: Disable 75 12: Resolution: 1280x768, Channel: single, Dithering: Disable 79 16: Resolution: 1366x768, Channel: single, Dithering: Disable 80 17: Resolution: 1024x600, Channel: single, Dithering: Enable 82 19: Resolution: 1280x800, Channel: single, Dithering: Enable [all …]
/linux-4.1.27/arch/sparc/kernel/
D	sun4d_smp.c	`184 int single; member 201 work->single = work->msk = work->resched = 0; in smp4d_ipi_init() 209 if (work->single) { in sun4d_ipi_interrupt() 210 work->single = 0; in sun4d_ipi_interrupt() 241 work->single = 1; in sun4d_ipi_single() 395 .single = sun4d_ipi_single,`
D	leon_smp.c	`263 int single; member 300 work->single = work->msk = work->resched = 0; in leon_ipi_init() 316 work->single = 1; in leon_ipi_single() 348 if (work->single) { in leonsmp_ipi_interrupt() 349 work->single = 0; in leonsmp_ipi_interrupt() 459 .single = leon_ipi_single,`
/linux-4.1.27/arch/frv/kernel/
D	entry-table.S	`39 # (5) The fixup table for kernel-trap single-step 40 # (6) The fixup table for user-trap single-step 42 # Due to the way single-stepping works on this CPU (single-step is not 44 # we have to catch the single-step event in break.S and jump to the fixup 49 # single-step bypass management 77 # trap fixup table for single-stepping in user mode 83 # trap fixup table for single-stepping in user mode`
D	break.S	82 # catch the return from a TLB-miss handler that had single-step disabled 93 # - we need to take special action to suspend h/w single stepping if we've done 129 # special break insn requests single-stepping to be turned back on 286 # cancel single-stepping mode 305 # we single-stepped into an interrupt handler whilst interrupts were merely virtually disabled 336 # we also want to single step anyway, but after fixing up so that we get an event on the 360 # and then process the single step 389 # cancel single-stepping mode 428 # single stepping on return
/linux-4.1.27/drivers/staging/slicoss/
D	README	`3 Mojave cards (single port PCI Gigabit) both copper and fiber 4 Oasis cards (single and dual port PCI-x Gigabit) copper and fiber`
D	Kconfig	`9 Mojave cards (single port PCI Gigabit) both copper and fiber 10 Oasis cards (single and dual port PCI-x Gigabit) copper and fiber`
/linux-4.1.27/Documentation/
D	kselftest.txt	`11 run on a single cpu as opposed to all hotplug capable cpus, and memory 24 To build and run the tests with a single command, use: 33 single test to run, or a list of tests to run. 35 To run only tests targeted for a single subsystem:`
D	DMA-attributes.txt	`74 By default dma_map_{single,page,sg} functions family transfer a given 78 performed by calling dma_map_{single,page,sg} function more than once 84 dma_map_{single,page,sg}() for other devices will perform exactly the 91 dma_unmap_{single,page,sg} functions family to force buffer to stay in`
D	dell_rbu.txt	`43 copied to a single contiguous block of physical memory. 44 In case of packet mechanism the single memory can be broken in smaller chunks 61 image file and then arrange all these packets back to back in to one single 67 This method makes sure that all the packets get to the driver in a single operation.`
/linux-4.1.27/Documentation/filesystems/
D	inotify.txt	`36 There are other good arguments. With a single fd, there is a single 37 item to block on, which is mapped to a single queue of events. The single 43 which happened first. A single queue trivially gives you ordering. Such 48 versus just one. It is a lot messier in the kernel. A single, linear`
D	devpts.txt	`12 IOW, devpts now supports both single-instance and multi-instance semantics. 22 'single-instance' mode and the current, single-instance semantics are 25 The only difference between this single-instance mode and the legacy mode 32 of ptys in other instances of devpts. Like in the single-instance mode, the 78 enables better error-reporting and treats both single-instance and 90 should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single-`
D	ceph.txt	`11 * High availability and reliability. No single point of failure. 40 particular, inodes with only a single link are embedded in 42 loaded into its cache with a single I/O operation. The contents of 73 You only need to specify a single monitor, as the client will get the`
/linux-4.1.27/Documentation/block/
D	stat.txt	`9 Q. Why are there multiple statistics in a single file? Doesn't sysfs 10 normally contain a single value per file? 11 A. By having a single file, the kernel can guarantee that the statistics 15 represent a single point in time. 17 The stat file consists of a single line of text containing 11 decimal`
D	queue-sysfs.txt	`26 the number of bytes that can be trimmed or unmapped in a single operation. 28 number of bytes that can be discarded in a single operation. Discard 52 This is the maximum number of kilobytes supported in a single data transfer.`
/linux-4.1.27/Documentation/devicetree/bindings/clock/
D	fixed-clock.txt	`10 - clock-frequency : frequency of clock in Hz. Should be a single cell. 14 Should be a single cell.`
D	pistachio-clock.txt	`26 - #clock-cells: Must be 1. The single cell is the clock identifier. 55 - #clock-cells: Must be 1. The single cell is the clock identifier. 83 - #clock-cells: Must be 1. The single cell is the clock identifier. 112 - #clock-cells: Must be 1. The single cell is the clock identifier.`
/linux-4.1.27/Documentation/devicetree/bindings/dma/
D	ste-coh901318.txt	`9 - interrupts: the single DMA IRQ 11 COH 901 318 are simple and identified by a single number`
/linux-4.1.27/tools/perf/config/
D	utilities.mak	`23 # single space each newline character in the output 51 # single-quotes, so be wary of the characters 67 # delimited by shell single-quotes, so be wary 84 # single-quotes. 90 # Usage: single-quoted-and-escaped-text = $(call shell-sq,text) 119 # to render the text as a single line; when the shell`
/linux-4.1.27/Documentation/devicetree/bindings/iommu/
D	rockchip,iommu.txt	`5 its master device. Each slave device is bound to a single master device, and 14 "single-master" device, and needs no additional information`
D	iommu.txt	`29 IOMMUs can be single-master or multiple-master. Single-master IOMMU devices 50 be multi-master yet only expose a single master in a given configuration. 53 in order to enable translation for a given master. In such cases the single 55 one cell can be required to represent a single master ID.`
/linux-4.1.27/drivers/media/dvb-frontends/drx39xyj/
D	drx_dap_fasi.h	`201 #error DRXDAP_MAX_WCHUNKSIZE must be at least 3 in single master mode 209 #error DRXDAP_MAX_WCHUNKSIZE must be at least 5 in single master mode`
/linux-4.1.27/Documentation/devicetree/bindings/pwm/
D	pwm.txt	`10 pwm-list ::= <single-pwm> [pwm-list] 11 single-pwm ::= <pwm-phandle> <pwm-specifier> 22 Drivers for devices that use more than a single PWM device can use the`
/linux-4.1.27/Documentation/devicetree/bindings/timer/
D	arm,sp804.txt	`7 interrupt for timer 1 and timer 2. In the case of a single entry, it is 13 apb_pclk. A single clock can also be specified if the same clock is`
D	nvidia,tegra20-timer.txt	`3 The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free`
D	brcm,bcm2835-system-timer.txt	`4 single 64-bit free running counter. Each channel has an output compare`
/linux-4.1.27/drivers/power/
D	bq27x00_battery.c	89 int (read)(struct bq27x00_device_info di, u8 reg, bool single); 207 bool single) in bq27x00_read() argument 210 return di->bus.read(di, reg - BQ27425_REG_OFFSET, single); in bq27x00_read() 211 return di->bus.read(di, reg, single); in bq27x00_read() 840 static int bq27x00_read_i2c(struct bq27x00_device_info *di, u8 reg, bool single) in bq27x00_read_i2c() argument 857 if (single) in bq27x00_read_i2c() 866 if (!single) in bq27x00_read_i2c() 981 bool single) in bq27000_read_platform() argument 989 if (!single) { in bq27000_read_platform()
/linux-4.1.27/arch/unicore32/mm/
D	Kconfig	`37 bool "Disable TLB single entry ops" 40 Say Y here to disable the TLB single entry operations.`
/linux-4.1.27/Documentation/devicetree/bindings/gpio/
D	gpio.txt	10 gpio-list ::= <single-gpio> [gpio-list] 11 single-gpio ::= <gpio-phandle> <gpio-specifier> 85 a) Define a single static polarity for the signal, with the expectation that 104 b) Pick a single option for device signal polarity, and document this choice 176 gpio-range-list ::= <single-gpio-range> [gpio-range-list] 177 single-gpio-range ::= <numeric-gpio-range> \| <named-gpio-range> 191 for every single-gpio-range in gpio-ranges: 219 Here, a single GPIO controller has GPIOs 0..9 routed to pin controller
D	snps-dwapb-gpio.txt	`19 - reg : The integer port index of the port, a single cell. 31 - snps,nr-gpios : The number of pins in the port, a single cell.`
/linux-4.1.27/Documentation/devicetree/bindings/mipi/dsi/
D	mipi-dsi-bus.txt	`15 The following assumes that only a single peripheral is connected to a DSI 27 a maximum of 4 devices can be addressed on a single bus. Hence the value of 43 Some DSI peripherals respond to more than a single virtual channel. In that`
/linux-4.1.27/arch/mn10300/kernel/
D	switch_to.S	`81 # Lift the single-step breakpoints when the task being traced is switched out 91 # Clear the single-step flag to prevent us coming this way until we get 132 # Reinstall the single-step breakpoints when the task being traced is switched`
/linux-4.1.27/arch/x86/xen/
D	time.c	`359 struct vcpu_set_singleshot_timer single; in xen_vcpuop_set_next_event() local 364 single.timeout_abs_ns = get_abs_timeout(delta); in xen_vcpuop_set_next_event() 365 single.flags = VCPU_SSHOTTMR_future; in xen_vcpuop_set_next_event() 367 ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, cpu, &single); in xen_vcpuop_set_next_event()`
/linux-4.1.27/Documentation/devicetree/bindings/interrupt-controller/
D	interrupts.txt	`20 interrupts are routed and contains a single phandle referring to the interrupt 38 property defines the number of cells needed to specify a single interrupt. 46 The #interrupt-cells property is set to 1 and the single cell defines the`
/linux-4.1.27/Documentation/vm/
D	zsmalloc.txt	`7 fail under memory pressure. On the other hand, if we just use single 14 pages act as a single higher-order page i.e. an object can span 0-order 15 page boundaries. The code refers to these linked pages as a single entity`
/linux-4.1.27/arch/arm/nwfpe/
D	softfloat-specialize	71 The pattern for a default generated single-precision NaN. 78 Returns 1 if the single-precision floating-point value `a' is a NaN; 91 Returns 1 if the single-precision floating-point value `a' is a signaling 104 Returns the result of converting the single-precision floating-point NaN 123 Returns the result of converting the canonical NaN `a' to the single- 136 Takes two single-precision floating-point values `a' and `b', one of which
/linux-4.1.27/Documentation/ABI/testing/
D	sysfs-ocfs2	`23 Reading from this file returns a single line, the major 59 on a single line. 81 cluster stack on a single line.`
D	sysfs-block	`195 trimmed or unmapped in a single operation. Some storage 197 blocks that can be described in a single command. The 200 a single operation. Discard requests issued to the 223 single data block can be written to a range of several 227 bytes can be written in a single write same command. If`
D	sysfs-driver-tegra-fuse	`7 words in LSB first format. Each bit represents a single value`
/linux-4.1.27/Documentation/i2c/
D	smbus-protocol	23 single data byte, the functions using SMBus protocol operation names execute 54 This sends a single bit to the device, at the place of the Rd/Wr bit. 64 This reads a single byte from a device, without specifying a device 77 This operation is the reverse of Receive Byte: it sends a single byte 88 This reads a single byte from a device, from a designated register. 115 This writes a single byte to a device, to a designated register. The 230 single interrupt pin on the SMBus master, while still allowing the master
/linux-4.1.27/firmware/cis/
D	3CXEM556.cis.ihex	`12 # This card is MFC-compliant, but identifies itself as single function`
D	3CCFEM556.cis.ihex	`12 # This card is MFC-compliant, but identifies itself as single function`
/linux-4.1.27/arch/x86/math-emu/
D	reg_ld_str.c	155 int FPU_load_single(float __user single, FPU_REG loaded_data) in FPU_load_single() argument 161 FPU_access_ok(VERIFY_READ, single, 4); in FPU_load_single() 162 FPU_get_user(m32, (unsigned long __user )single); in FPU_load_single() 563 int FPU_store_single(FPU_REG st0_ptr, u_char st0_tag, float __user single) in FPU_store_single() argument 726 FPU_access_ok(VERIFY_WRITE, single, 4); in FPU_store_single() 728 (unsigned long __user )single); in FPU_store_single() 744 FPU_access_ok(VERIFY_WRITE, single, 4); in FPU_store_single() 745 FPU_put_user(templ, (unsigned long __user *)single); in FPU_store_single()
D	fpu_proto.h	`116 extern int FPU_load_single(float __user single, FPU_REG loaded_data); 126 float __user * single);`
/linux-4.1.27/Documentation/pcmcia/
D	locking.txt	`61 or single-use fields not mentioned): 100 or single-use fields not mentioned):`
/linux-4.1.27/Documentation/devicetree/bindings/iio/adc/
D	xilinx-xadc.txt	`29 * "single": External multiplexer mode is used with one 35 Valid values for single external multiplexer mode are: 48 external multiplexer mode (either single or dual). If the device is`
/linux-4.1.27/Documentation/devicetree/bindings/powerpc/fsl/
D	srio.txt	`30 A single IRQ that handles error conditions is specified by this 36 Definition: A single <phandle> value that points to the RMU. 64 memory and maintenance transactions then a single LIODN is`
/linux-4.1.27/Documentation/blockdev/
D	zram.txt	`27 By default, compression backend uses single compression stream. 39 initialisation. Once the device initialised as a single stream compression 41 the value of max_comp_streams because single stream compression backend 156 single line of text and contains the following stats separated by 165 The stat file represents device's mm statistics. It consists of a single`
/linux-4.1.27/arch/m68k/fpsp040/
D	util.S	`109 beql ovff_sgl \|force precision is single 124 beql ovff_sgl \|the instruction is force single 143 movel #0x00000001,%d0 \|set single 318 \| 01 - single 361 beql unff_sgl \|force precision is single 376 beql unff_sgl \|force single 395 \| Force single 440 \| single 001 -> 01 451 cmpb #1,%d0 \|check for single`
D	bugfix.S	`348 \| Check for opclass 2 and single size. If not both, exit. 451 \| We have the opclass 2 single source situation. 457 cmpw #0x407F,ETEMP_EX(%a6) \|single +max 462 cmpw #0xC07F,ETEMP_EX(%a6) \|single -max 467 cmpw #0x3F80,ETEMP_EX(%a6) \|single +min 472 cmpw #0xBF80,ETEMP_EX(%a6) \|single -min`
/linux-4.1.27/drivers/devfreq/
D	Kconfig	`15 However, because the clock frequencies of a single device are 16 determined by the single device's state, an instance of devfreq 17 is attached to a single device and returns a "representative"`
/linux-4.1.27/arch/ia64/
D	module.lds	`2 /* Group unwind sections into a single section: */`
/linux-4.1.27/Documentation/devicetree/bindings/arm/samsung/
D	interrupt-combiner.txt	`4 can combine interrupt sources as a group and provide a single interrupt request 13 A single node in the device tree is used to describe the interrupt combiner`
/linux-4.1.27/Documentation/devicetree/bindings/spmi/
D	qcom,spmi-pmic-arb.txt	`5 devices to control a single SPMI master. 33 single interrupt entry for the peripheral interrupt`
/linux-4.1.27/drivers/ide/
D	cy82c693.c	`59 u8 single = (mode & 0x10) >> 4, index = 0, data = 0; in cy82c693_set_dma_mode() local 63 data = (mode & 3) \| (single << 2); in cy82c693_set_dma_mode()`
/linux-4.1.27/Documentation/devicetree/bindings/arm/spear/
D	shirq.txt	`4 of devices. The multiplexor provides a single interrupt to parent 13 A single node in the device tree is used to describe the shared`
/linux-4.1.27/Documentation/devicetree/bindings/mfd/
D	qcom-pm8xxx.txt	`69 Definition: single entry specifying the base address of the RTC registers 74 Definition: single entry specifying the RTC's alarm interrupt`
D	omap-usb-host.txt	`32 - single-ulpi-bypass: Must be present if the controller contains a single`
/linux-4.1.27/include/linux/amba/
D	pl08x.h	`68 bool single; member`
/linux-4.1.27/Documentation/arm/SA1100/
D	nanoEngine	`4 "nanoEngine" is a SA1110 based single board computer from`
/linux-4.1.27/Documentation/devicetree/bindings/media/
D	meson-ir.txt	`6 - interrupts : a single specifier for the interrupt from the device`
/linux-4.1.27/tools/build/Documentation/
D	Build.txt	`10 Unlike the kernel we don't have a single build object 'obj-y' list that where 90 It's only a matter of 2 single commands to create the final binaries: 135 It's possible to build single object file by choice, like:`
/linux-4.1.27/Documentation/x86/
D	tlb.txt	`7 2. Use the invlpg instruction to invalidate a single page at a 26 expensive relative to single-page flushes. 45 Despite the fact that a single individual flush on x86 is`
/linux-4.1.27/Documentation/devicetree/bindings/arm/calxeda/
D	l2ecc.txt	`6 - interrupts : Should be single bit error interrupt, then double bit error`
/linux-4.1.27/Documentation/device-mapper/
D	switch.txt	`23 The storage group exposes a single target discovery portal, no matter 25 session is connected to an eth port on a single member. Data to a LUN 53 The lower tier consists of a single dm multipath device for each member. 60 The upper tier consists of a single dm-switch device. This device uses`
/linux-4.1.27/Documentation/ABI/stable/
D	sysfs-driver-ib_srp	`25 512-byte sectors to be transferred via a single SCSI command. 27 number of outstanding commands for a single LUN. 40 for a single SRP_CMD, and commands whose S/G list length 49 target via a single SCSI command. Since not all SRP target 103 the target in a single SRP_CMD request.`
/linux-4.1.27/Documentation/devicetree/bindings/arm/
D	ccn.txt	`12 - interrupts: (standard interrupt property) single interrupt`
/linux-4.1.27/Documentation/devicetree/bindings/regulator/
D	da9210.txt	`8 Any standard regulator properties can be used to configure the single da9210`
D	max8973-regulator.txt	`8 Any standard regulator properties can be used to configure the single max8973`
/linux-4.1.27/Documentation/devicetree/bindings/serial/
D	cavium-uart.txt	`9 - interrupts: A single interrupt specifier.`
D	brcm,bcm6345-uart.txt	`9 - interrupts: A single interrupt specifier.`
D	mtk-uart.txt	`15 - interrupts: A single interrupt specifier.`
D	digicolor-usart.txt	`10 - interrupts: Should contain a single USART controller interrupt.`
/linux-4.1.27/drivers/usb/serial/
D	Kconfig	29 allows logins in single user mode). This could be useful if some 95 Say Y here if you want to use a Belkin USB Serial single port 96 adaptor (F5U103 is one of the model numbers) or the Peracom single 105 Say Y here if you want to use a Winchiphead CH341 single port 162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} 172 Say Y here if you want to use a FTDI SIO single port USB to serial 252 Say Y here if you want to use the Fintek F81232 single 294 Say Y here if you want to use a Keyspan PDA single port USB to 396 Say Y here if you want to use a KL5KUSB105 - based single port 428 Say Y here if you want to use a USB Serial single port adapter from [all …]
/linux-4.1.27/drivers/net/ethernet/wiznet/
D	Kconfig	`27 W5100 is a single chip with integrated 10/100 Ethernet MAC, 40 W5300 is a single chip with integrated 10/100 Ethernet MAC,`
/linux-4.1.27/Documentation/devicetree/bindings/input/touchscreen/
D	ti-tsc-adc.txt	`11 read a single coordinate. A single`
/linux-4.1.27/Documentation/devicetree/bindings/spi/
D	spi-rspi.txt	`22 for a single muxed interrupt. 27 - "mux" for a single muxed interrupt.`
/linux-4.1.27/Documentation/devicetree/bindings/usb/
D	udc-xilinx.txt	`7 - interrupts : Should contain single irq line of USB2 device`
/linux-4.1.27/arch/sh/boards/mach-r2d/
D	Kconfig	`11 with a single PCI slot.`
/linux-4.1.27/arch/mn10300/
D	Kconfig.debug	`57 bool "Allow software single-stepping in GDB stub" 60 Allow GDB stub to perform software single-stepping through the 62 it uses temporary breakpoints to emulate single-stepping.`
/linux-4.1.27/drivers/net/can/usb/
D	Kconfig	`68 PCAN-USB single CAN 2.0b channel USB adapter 70 PCAN-USB FD single CAN-FD channel USB adapter`
/linux-4.1.27/Documentation/devicetree/bindings/leds/
D	register-bit-led.txt	`4 where single bits in a certain register can turn on/off a 5 single LED. The register bit LEDs appear as children to the`
/linux-4.1.27/Documentation/devicetree/bindings/mips/cavium/
D	dma-engine.txt	`14 - interrupts: A single interrupt specifier.`
/linux-4.1.27/Documentation/devicetree/bindings/i2c/
D	i2c-meson.txt	`6 - interrupts: a single interrupt specifier`
D	i2c-digicolor.txt	`6 - interrupts: a single interrupt specifier`
D	i2c-octeon.txt	`13 - interrupts: A single interrupt specifier.`
D	i2c-jz4780.txt	`7 - clocks: Should contain a single clock specifier for the JZ4780 I2C clock.`
/linux-4.1.27/arch/arm/mach-omap1/include/mach/
D	lcd_dma.h	`68 extern void omap_set_lcd_dma_single_transfer(int single);`
/linux-4.1.27/Documentation/dmaengine/
D	provider.txt	23 A very simple DMA controller would only take into account a single 29 require a specific number of bits to be transferred in a single 41 using a parameter called the burst size, that defines how many single 46 that involve a single contiguous block of data. However, some of the 188 scatter-gather transfer, with a single chunk to transfer, it's a 204 deal with a single chunk to copy or a collection of them, here, 205 we just have a single transaction type that is supposed to 207 - If you want to transfer a single contiguous memory buffer, 215 on a single ring buffer that you will fill with your audio data.
/linux-4.1.27/drivers/isdn/icn/
D	Kconfig	`6 company called ICN. 2B is the standard version for a single ISDN`
/linux-4.1.27/Documentation/devicetree/bindings/arm/msm/
D	ssbi.txt	`17 The slave device should be the single child node of the ssbi device`
/linux-4.1.27/fs/notify/inotify/
D	Kconfig	`9 directories via a single open fd. Events are read from the file`
/linux-4.1.27/Documentation/devicetree/bindings/video/
D	vga-connector.txt	`18 The VGA connector has a single port that must be connected to a video source`
/linux-4.1.27/Documentation/devicetree/bindings/net/
D	marvell-orion-net.txt	`11 the multiple levels is that the port registers are interleaved within a single 16 only one port associated. Multiple ports are implemented as multiple single-port`
/linux-4.1.27/Documentation/devicetree/bindings/sound/
D	wm8994.txt	`50 - wlf,lineout1-se : If present LINEOUT1 is in single ended mode. 51 - wlf,lineout2-se : If present LINEOUT2 is in single ended mode.`
/linux-4.1.27/scripts/
D	Makefile.lib	`53 single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m))) 84 single-used-m := $(addprefix $(obj)/,$(single-used-m))`
/linux-4.1.27/Documentation/filesystems/pohmelfs/
D	design_notes.txt	`20 directories with a single network command. 21 (like removing the whole kernel tree via a single network command). 37 command (or set of commands, which is frequently used during data writing: single transactions`
/linux-4.1.27/Documentation/networking/
D	ixgbe.txt	`59 Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL 60 Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ 61 Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL 87 - Only single speed, 10 gigabit modules are supported. 96 Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL 97 Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ 98 Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL`
/linux-4.1.27/arch/avr32/mach-at32ap/
D	Kconfig	`14 The current code can only support a single external memory bus`
/linux-4.1.27/arch/x86/lib/
D	cmpxchg16b_emu.S	`32 # atomic on a single cpu (as provided by the this_cpu_xx class of`
/linux-4.1.27/drivers/firmware/efi/libstub/
D	Makefile	`15 -fno-builtin -fpic -mno-single-pic-base`
/linux-4.1.27/Documentation/devicetree/bindings/rtc/
D	nvidia,tegra20-rtc.txt	`13 - interrupts : A single interrupt specifier.`
/linux-4.1.27/arch/um/
D	Kconfig.net	`28 The Ethertap User-Mode Linux network transport allows a single 84 UMLs on a single host). You may choose more than one without 92 UMLs on a single host to communicate with each other, but not to 103 If you'd like to set up a network with other UMLs on a single host, 116 UMLs on a single host to communicate with each other and also`
/linux-4.1.27/arch/cris/arch-v10/lib/
D	csumcpfruser.S	`42 ;; Here from a failing single byte.`
/linux-4.1.27/Documentation/devicetree/bindings/staging/iio/adc/
D	spear-adc.txt	`15 omitted, single data conversion will be used.`

12 3 4 5

Project(s)

Full Search
Definition
Symbol
File Path
History
Type