1/*
2 * Suppport for CompuLab CM-T54 on SB-T54 baseboard
3 */
4
5#include "omap5-cm-t54.dts"
6
7/ {
8	model = "CompuLab CM-T54 on SB-T54";
9	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
10};
11
12&omap5_pmx_core {
13	i2c4_pins: pinmux_i2c4_pins {
14		pinctrl-single,pins = <
15			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
16			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
17		>;
18	};
19
20	mmc1_aux_pins: pinmux_mmc1_aux_pins {
21		pinctrl-single,pins = <
22			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
23			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
24		>;
25	};
26};
27
28&mmc1 {
29	pinctrl-names = "default";
30	pinctrl-0 = <
31		&mmc1_pins
32		&mmc1_aux_pins
33	>;
34	cd-inverted;
35	wp-inverted;
36	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
37	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
38};
39
40&i2c4 {
41	pinctrl-names = "default";
42	pinctrl-0 = <&i2c4_pins>;
43
44	clock-frequency = <400000>;
45
46	at24@50 {
47		compatible = "at24,24c02";
48		pagesize = <16>;
49		reg = <0x50>;
50	};
51};
52