| /linux-4.1.27/drivers/input/joystick/ |
| D | spaceball.c | 233 input_dev->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_9); in spaceball_connect()
238 input_dev->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_2) | in spaceball_connect()
243 input_dev->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_1) | in spaceball_connect()
|
| D | magellan.c | 47 static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 };
|
| D | gamecon.c | 558 static const short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 };
|
| /linux-4.1.27/arch/mips/bcm47xx/ |
| D | buttons.c | 26 BCM47XX_GPIO_KEY(4, BTN_0), /* Router mode */
137 BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
144 BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
151 BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
|
| /linux-4.1.27/arch/mips/ath79/ |
| D | mach-ap81.c | 56 .code = BTN_0,
|
| /linux-4.1.27/drivers/input/tablet/ |
| D | hanwang.c | 118 BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8,
230 input_report_key(input_dev, BTN_0, data[2]); in hanwang_parse_packet()
244 input_report_key(input_dev, BTN_0, data[5] & 0x01); in hanwang_parse_packet()
|
| /linux-4.1.27/drivers/input/misc/ |
| D | powermate.c | 109 input_report_key(pm->input, BTN_0, pm->data[0] & 0x01); in powermate_irq()
370 input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); in powermate_probe()
|
| D | rb532_button.c | 17 #define RB532_BTN_KSYM BTN_0
|
| /linux-4.1.27/drivers/hid/ |
| D | wacom_wac.c | 257 input_report_key(input, BTN_0, (data[1] & 0x01)); in wacom_dtus_irq()
428 input_report_key(pad_input, BTN_0, (data[7] & 0x02)); in wacom_graphire_irq()
709 input_report_key(input, BTN_0, (data[2] & 0x01)); in wacom_intuos_irq()
732 input_report_key(input, BTN_0, (data[6] & 0x01)); in wacom_intuos_irq()
744 input_report_key(input, BTN_0, (data[3] & 0x01)); in wacom_intuos_irq()
759 input_report_key(input, BTN_0, (data[6] & 0x01)); in wacom_intuos_irq()
834 input_report_key(input, BTN_0, (data[3] & 0x01)); /* Center */ in wacom_intuos_irq()
845 input_report_key(input, BTN_0, (data[3] & 0x01)); in wacom_intuos_irq()
869 input_report_key(input, BTN_0, (data[5] & 0x01)); in wacom_intuos_irq()
894 input_report_key(input, BTN_0, (data[5] & 0x01)); in wacom_intuos_irq()
[all …]
|
| D | hid-ntrig.c | 880 __clear_bit(BTN_0, input->keybit); in ntrig_input_configured()
|
| D | hid-debug.c | 855 [BTN_0] = "Btn0", [BTN_1] = "Btn1",
|
| D | hid-sony.c | 683 [0x0f] = BTN_0, /* cross */
|
| /linux-4.1.27/arch/sh/boards/mach-rsk/ |
| D | devices-rsk7203.c | 91 .code = BTN_0,
|
| /linux-4.1.27/arch/arm/boot/dts/ |
| D | omap3-overo-palo43-common.dtsi | 42 linux,code = <BTN_0>;
|
| D | omap3-overo-gallop43-common.dtsi | 42 linux,code = <BTN_0>;
|
| D | omap3-overo-chestnut43-common.dtsi | 42 linux,code = <BTN_0>;
|
| D | omap3-overo-alto35-common.dtsi | 49 linux,code = <BTN_0>;
|
| D | bcm4708-buffalo-wzr-1750dhp.dts | 120 linux,code = <BTN_0>;
|
| D | imx51-apf51dev.dts | 65 linux,code = <256>; /* BTN_0 */
|
| D | omap4-duovero-parlor.dts | 37 linux,code = <BTN_0>;
|
| D | imx6qdl-cubox-i.dtsi | 118 linux,code = <BTN_0>;
|
| /linux-4.1.27/Documentation/input/ |
| D | input-programming.txt | 25 input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
47 button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
87 type events, and from those only BTN_0 event code. Thus we only set these
91 set_bit(BTN_0, button_dev.keybit);
|
| /linux-4.1.27/drivers/mfd/ |
| D | ucb1x00-assabet.c | 52 buttons[i].code = BTN_0 + i; in ucb1x00_assabet_add()
|
| /linux-4.1.27/arch/mips/alchemy/ |
| D | board-mtx1.c | 113 .code = BTN_0,
|
| /linux-4.1.27/arch/arm/mach-imx/ |
| D | eukrea_mbimxsd35-baseboard.c | 210 .code = BTN_0,
|
| /linux-4.1.27/sound/core/ |
| D | jack.c | 91 jack->key[i] = BTN_0 + i; in snd_jack_dev_register()
|
| /linux-4.1.27/arch/arm/boot/dts/include/dt-bindings/input/ |
| D | input.h | 275 #define BTN_0 0x100 macro
|
| /linux-4.1.27/arch/blackfin/mach-bf533/boards/ |
| D | blackstamp.c | 344 {BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
|
| D | ezkit.c | 371 {BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"},
|
| D | stamp.c | 494 {BTN_0, GPIO_PF5, 0, "gpio-keys: BTN0"},
|
| /linux-4.1.27/arch/mips/boot/dts/include/dt-bindings/input/ |
| D | input.h | 275 #define BTN_0 0x100 macro
|
| /linux-4.1.27/include/dt-bindings/input/ |
| D | input.h | 275 #define BTN_0 0x100 macro
|
| /linux-4.1.27/arch/powerpc/boot/dts/include/dt-bindings/input/ |
| D | input.h | 275 #define BTN_0 0x100 macro
|
| /linux-4.1.27/arch/arm64/boot/dts/include/dt-bindings/input/ |
| D | input.h | 275 #define BTN_0 0x100 macro
|
| /linux-4.1.27/arch/metag/boot/dts/include/dt-bindings/input/ |
| D | input.h | 275 #define BTN_0 0x100 macro
|
| /linux-4.1.27/arch/arm/mach-omap2/ |
| D | board-overo.c | 346 .code = BTN_0,
|
| /linux-4.1.27/arch/arm/mach-omap1/ |
| D | board-htcherald.c | 265 {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
|
| /linux-4.1.27/arch/blackfin/mach-bf561/boards/ |
| D | ezkit.c | 359 {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
|
| /linux-4.1.27/arch/blackfin/mach-bf518/boards/ |
| D | tcm-bf518.c | 572 {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
|
| D | ezbrd.c | 650 {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
|
| /linux-4.1.27/arch/blackfin/mach-bf527/boards/ |
| D | ezbrd.c | 693 {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
|
| D | cm_bf527.c | 819 {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
|
| D | ezkit.c | 1077 {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
|
| /linux-4.1.27/drivers/input/mouse/ |
| D | synaptics.c | 873 input_report_key(dev, BTN_0 + 2 * i, in synaptics_report_ext_buttons()
1240 __set_bit(BTN_0 + i, dev->keybit); in set_input_params()
|
| D | alps.c | 342 input_report_key(dev, BTN_0, packet[2] & 4); in alps_process_packet_v1_v2()
2898 dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); in alps_init()
|
| /linux-4.1.27/arch/blackfin/mach-bf538/boards/ |
| D | ezkit.c | 771 {BTN_0, GPIO_PC7, 1, "gpio-keys: BTN0"},
|
| /linux-4.1.27/include/uapi/linux/ |
| D | input.h | 483 #define BTN_0 0x100 macro
|
| /linux-4.1.27/arch/blackfin/mach-bf548/boards/ |
| D | cm_bf548.c | 1065 {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
|
| D | ezkit.c | 1784 {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
|
| /linux-4.1.27/drivers/input/ |
| D | mousedev.c | 232 case BTN_0: in mousedev_key_event()
|
| /linux-4.1.27/drivers/extcon/ |
| D | extcon-arizona.c | 108 { .max = 11, .key = BTN_0 },
|
| /linux-4.1.27/arch/blackfin/mach-bf609/boards/ |
| D | ezkit.c | 1707 {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"},
|
| /linux-4.1.27/arch/blackfin/mach-bf537/boards/ |
| D | stamp.c | 95 {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
|