For compatibility reasons the character device file names recommended for V4L2 video capture, overlay, radio and raw vbi capture devices did not change from those used by V4L. They are listed in Chapter 4, Interfaces and below in Table 7.1, “V4L Device Types, Names and Numbers”.

The teletext devices (minor range 192-223) have been removed in V4L2 and no longer exist. There is no hardware available anymore for handling pure teletext. Instead raw or sliced VBI is used.

The V4L videodev module automatically assigns minor numbers to drivers in load order, depending on the registered device type. We recommend that V4L2 drivers by default register devices with the same numbers, but the system administrator can assign arbitrary minor numbers using driver module options. The major device number remains 81.

V4L prohibits (or used to prohibit) multiple opens of a device file. V4L2 drivers may support multiple opens, see the section called “Opening and Closing Devices” for details and consequences.

V4L drivers respond to V4L2 ioctls with an EINVAL error code.

The V4L VIDIOCGCAP ioctl is equivalent to V4L2's VIDIOC_QUERYCAP.

The name field in struct video_capability became card in struct v4l2_capability, type was replaced by capabilities. Note V4L2 does not distinguish between device types like this, better think of basic video input, video output and radio devices supporting a set of related functions like video capturing, video overlay and VBI capturing. See the section called “Opening and Closing Devices” for an introduction.

The audios field was replaced by capabilities flag V4L2_CAP_AUDIO, indicating if the device has any audio inputs or outputs. To determine their number applications can enumerate audio inputs with the VIDIOC_G_AUDIO ioctl. The audio ioctls are described in the section called “Audio Inputs and Outputs”.

The maxwidth, maxheight, minwidth and minheight fields were removed. Calling the VIDIOC_S_FMT or VIDIOC_TRY_FMT ioctl with the desired dimensions returns the closest size possible, taking into account the current video standard, cropping and scaling limitations.

V4L provides the VIDIOCGCHAN and VIDIOCSCHAN ioctl using struct video_channel to enumerate the video inputs of a V4L device. The equivalent V4L2 ioctls are VIDIOC_ENUMINPUT, VIDIOC_G_INPUT and VIDIOC_S_INPUT using struct v4l2_input as discussed in the section called “Video Inputs and Outputs”.

The channel field counting inputs was renamed to index, the video input types were renamed as follows:

Unlike the tuners field expressing the number of tuners of this input, V4L2 assumes each video input is connected to at most one tuner. However a tuner can have more than one input, i. e. RF connectors, and a device can have multiple tuners. The index number of the tuner associated with the input, if any, is stored in field tuner of struct v4l2_input. Enumeration of tuners is discussed in the section called “Tuners and Modulators”.

The redundant VIDEO_VC_TUNER flag was dropped. Video inputs associated with a tuner are of type V4L2_INPUT_TYPE_TUNER. The VIDEO_VC_AUDIO flag was replaced by the audioset field. V4L2 considers devices with up to 32 audio inputs. Each set bit in the audioset field represents one audio input this video input combines with. For information about audio inputs and how to switch between them see the section called “Audio Inputs and Outputs”.

The norm field describing the supported video standards was replaced by std. The V4L specification mentions a flag VIDEO_VC_NORM indicating whether the standard can be changed. This flag was a later addition together with the norm field and has been removed in the meantime. V4L2 has a similar, albeit more comprehensive approach to video standards, see the section called “Video Standards” for more information.

The V4L VIDIOCGTUNER and VIDIOCSTUNER ioctl and struct video_tuner can be used to enumerate the tuners of a V4L TV or radio device. The equivalent V4L2 ioctls are VIDIOC_G_TUNER and VIDIOC_S_TUNER using struct v4l2_tuner. Tuners are covered in the section called “Tuners and Modulators”.

The tuner field counting tuners was renamed to index. The fields name, rangelow and rangehigh remained unchanged.

The VIDEO_TUNER_PAL, VIDEO_TUNER_NTSC and VIDEO_TUNER_SECAM flags indicating the supported video standards were dropped. This information is now contained in the associated struct v4l2_input. No replacement exists for the VIDEO_TUNER_NORM flag indicating whether the video standard can be switched. The mode field to select a different video standard was replaced by a whole new set of ioctls and structures described in the section called “Video Standards”. Due to its ubiquity it should be mentioned the BTTV driver supports several standards in addition to the regular VIDEO_MODE_PAL (0), VIDEO_MODE_NTSC, VIDEO_MODE_SECAM and VIDEO_MODE_AUTO (3). Namely N/PAL Argentina, M/PAL, N/PAL, and NTSC Japan with numbers 3-6 (sic).

The VIDEO_TUNER_STEREO_ON flag indicating stereo reception became V4L2_TUNER_SUB_STEREO in field rxsubchans. This field also permits the detection of monaural and bilingual audio, see the definition of struct v4l2_tuner for details. Presently no replacement exists for the VIDEO_TUNER_RDS_ON and VIDEO_TUNER_MBS_ON flags.

The VIDEO_TUNER_LOW flag was renamed to V4L2_TUNER_CAP_LOW in the struct v4l2_tuner capability field.

The VIDIOCGFREQ and VIDIOCSFREQ ioctl to change the tuner frequency where renamed to VIDIOC_G_FREQUENCY and VIDIOC_S_FREQUENCY. They take a pointer to a struct v4l2_frequency instead of an unsigned long integer.

V4L2 has no equivalent of the VIDIOCGPICT and VIDIOCSPICT ioctl and struct video_picture. The following fields where replaced by V4L2 controls accessible with the VIDIOC_QUERYCTRL, VIDIOC_G_CTRL and VIDIOC_S_CTRL ioctls:

The V4L picture controls are assumed to range from 0 to 65535 with no particular reset value. The V4L2 API permits arbitrary limits and defaults which can be queried with the VIDIOC_QUERYCTRL ioctl. For general information about controls see the section called “User Controls”.

The depth (average number of bits per pixel) of a video image is implied by the selected image format. V4L2 does not explicitly provide such information assuming applications recognizing the format are aware of the image depth and others need not know. The palette field moved into the struct v4l2_pix_format:

V4L2 image formats are defined in Chapter 2, Image Formats. The image format can be selected with the VIDIOC_S_FMT ioctl.

The VIDIOCGAUDIO and VIDIOCSAUDIO ioctl and struct video_audio are used to enumerate the audio inputs of a V4L device. The equivalent V4L2 ioctls are VIDIOC_G_AUDIO and VIDIOC_S_AUDIO using struct v4l2_audio as discussed in the section called “Audio Inputs and Outputs”.

The audio "channel number" field counting audio inputs was renamed to index.

On VIDIOCSAUDIO the mode field selects one of the VIDEO_SOUND_MONO, VIDEO_SOUND_STEREO, VIDEO_SOUND_LANG1 or VIDEO_SOUND_LANG2 audio demodulation modes. When the current audio standard is BTSC VIDEO_SOUND_LANG2 refers to SAP and VIDEO_SOUND_LANG1 is meaningless. Also undocumented in the V4L specification, there is no way to query the selected mode. On VIDIOCGAUDIO the driver returns the actually received audio programmes in this field. In the V4L2 API this information is stored in the struct v4l2_tuner rxsubchans and audmode fields, respectively. See the section called “Tuners and Modulators” for more information on tuners. Related to audio modes struct v4l2_audio also reports if this is a mono or stereo input, regardless if the source is a tuner.

The following fields where replaced by V4L2 controls accessible with the VIDIOC_QUERYCTRL, VIDIOC_G_CTRL and VIDIOC_S_CTRL ioctls:

To determine which of these controls are supported by a driver V4L provides the flags VIDEO_AUDIO_VOLUME, VIDEO_AUDIO_BASS, VIDEO_AUDIO_TREBLE and VIDEO_AUDIO_BALANCE. In the V4L2 API the VIDIOC_QUERYCTRL ioctl reports if the respective control is supported. Accordingly the VIDEO_AUDIO_MUTABLE and VIDEO_AUDIO_MUTE flags where replaced by the boolean V4L2_CID_AUDIO_MUTE control.

All V4L2 controls have a step attribute replacing the struct video_audio step field. The V4L audio controls are assumed to range from 0 to 65535 with no particular reset value. The V4L2 API permits arbitrary limits and defaults which can be queried with the VIDIOC_QUERYCTRL ioctl. For general information about controls see the section called “User Controls”.

The V4L2 ioctls equivalent to VIDIOCGFBUF and VIDIOCSFBUF are VIDIOC_G_FBUF and VIDIOC_S_FBUF. The base field of struct video_buffer remained unchanged, except V4L2 defines a flag to indicate non-destructive overlays instead of a NULL pointer. All other fields moved into the struct v4l2_pix_format fmt substructure of struct v4l2_framebuffer. The depth field was replaced by pixelformat. See the section called “RGB Formats” for a list of RGB formats and their respective color depths.

Instead of the special ioctls VIDIOCGWIN and VIDIOCSWIN V4L2 uses the general-purpose data format negotiation ioctls VIDIOC_G_FMT and VIDIOC_S_FMT. They take a pointer to a struct v4l2_format as argument. Here the win member of the fmt union is used, a struct v4l2_window.

The x, y, width and height fields of struct video_window moved into struct v4l2_rect substructure w of struct v4l2_window. The chromakey, clips, and clipcount fields remained unchanged. Struct video_clip was renamed to struct v4l2_clip, also containing a struct v4l2_rect, but the semantics are still the same.

The VIDEO_WINDOW_INTERLACE flag was dropped. Instead applications must set the field field to V4L2_FIELD_ANY or V4L2_FIELD_INTERLACED. The VIDEO_WINDOW_CHROMAKEY flag moved into struct v4l2_framebuffer, under the new name V4L2_FBUF_FLAG_CHROMAKEY.

In V4L, storing a bitmap pointer in clips and setting clipcount to VIDEO_CLIP_BITMAP (-1) requests bitmap clipping, using a fixed size bitmap of 1024 × 625 bits. Struct v4l2_window has a separate bitmap pointer field for this purpose and the bitmap size is determined by w.width and w.height.

The VIDIOCCAPTURE ioctl to enable or disable overlay was renamed to VIDIOC_OVERLAY.

To capture only a subsection of the full picture V4L defines the VIDIOCGCAPTURE and VIDIOCSCAPTURE ioctls using struct video_capture. The equivalent V4L2 ioctls are VIDIOC_G_CROP and VIDIOC_S_CROP using struct v4l2_crop, and the related VIDIOC_CROPCAP ioctl. This is a rather complex matter, see the section called “Image Cropping, Insertion and Scaling” for details.

The x, y, width and height fields moved into struct v4l2_rect substructure c of struct v4l2_crop. The decimation field was dropped. In the V4L2 API the scaling factor is implied by the size of the cropping rectangle and the size of the captured or overlaid image.

The VIDEO_CAPTURE_ODD and VIDEO_CAPTURE_EVEN flags to capture only the odd or even field, respectively, were replaced by V4L2_FIELD_TOP and V4L2_FIELD_BOTTOM in the field named field of struct v4l2_pix_format and struct v4l2_window. These structures are used to select a capture or overlay format with the VIDIOC_S_FMT ioctl.

Originally the V4L API did not specify a raw VBI capture interface, only the device file /dev/vbi was reserved for this purpose. The only driver supporting this interface was the BTTV driver, de-facto defining the V4L VBI interface. Reading from the device yields a raw VBI image with the following parameters:

Undocumented in the V4L specification, in Linux 2.3 the VIDIOCGVBIFMT and VIDIOCSVBIFMT ioctls using struct vbi_format were added to determine the VBI image parameters. These ioctls are only partially compatible with the V4L2 VBI interface specified in the section called “Raw VBI Data Interface”.

An offset field does not exist, sample_format is supposed to be VIDEO_PALETTE_RAW, equivalent to V4L2_PIX_FMT_GREY. The remaining fields are probably equivalent to struct v4l2_vbi_format.

Apparently only the Zoran (ZR 36120) driver implements these ioctls. The semantics differ from those specified for V4L2 in two ways. The parameters are reset on open() and VIDIOCSVBIFMT always returns an EINVAL error code if the parameters are invalid.

V4L2 has no equivalent of the VIDIOCGUNIT ioctl. Applications can find the VBI device associated with a video capture device (or vice versa) by reopening the device and requesting VBI data. For details see the section called “Opening and Closing Devices”.

No replacement exists for VIDIOCKEY, and the V4L functions for microcode programming. A new interface for MPEG compression and playback devices is documented in the section called “Extended Controls”.