Searched refs:after (Results 1 - 200 of 6502) sorted by relevance

1234567891011>>

/linux-4.4.14/arch/mips/power/
H A Dhibernate.c7 /* Avoid TLB mismatch during and after kernel resume */ swsusp_arch_resume()
/linux-4.4.14/drivers/pnp/
H A DMakefile13 # pnp_system_init goes after pnpacpi/pnpbios init
/linux-4.4.14/arch/x86/power/
H A DMakefile1 # __restore_processor_state() restores %gs after S3 resume and so should not
/linux-4.4.14/tools/testing/selftests/powerpc/pmu/ebb/
H A Dpmae_handling_test.c29 static uint64_t before, after; variable
49 after = mfspr(SPRN_MMCR0); syscall_ebb_callee()
50 if (before != after) syscall_ebb_callee()
90 printf("Saw MMCR0 before 0x%lx after 0x%lx\n", before, after); test_body()
/linux-4.4.14/arch/alpha/kernel/
H A Dvmlinux.lds.S40 /* Will be freed after init */
46 needed for the THREAD_SIZE aligned init_task gets freed after init */
49 /* Freed after init ends here */
H A Dprocess.c108 delay this until after srm_paging_stop unless common_shutdown_1()
132 /* If we've gotten here after SysRq-b, leave interrupt common_shutdown_1()
364 * to be in so that we can fail gracefully. This is just for ps after
393 * code assumes that sleep_on() follows immediately after get_wchan()
395 * immediately after interruptible_sleep(). Ugly, isn't it? get_wchan()
397 * after all... get_wchan()
/linux-4.4.14/scripts/
H A Dconfig25 --enable-after|-E beforeopt option
26 Enable option directly after other option
27 --disable-after|-D beforeopt option
28 Disable option directly after other option
29 --module-after|-M beforeopt option
30 Turn option into module directly after other option
81 local after="$2"
85 sed -e "s:$before:$after:" "$infile" >"$tmpfile"
148 --*-after|-E|-D|-M)
204 --enable-after|-E)
208 --disable-after|-D)
212 --module-after|-M)
/linux-4.4.14/arch/cris/arch-v32/kernel/
H A Dcache.c10 /* Flush descriptor to make sure we get correct in_eop and after. */ flush_dma_descr()
15 (unsigned)(descr->after - descr->buf)); flush_dma_descr()
H A Dprocess.c43 * The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled
128 childregs->r10 = 0; /* Child returns 0 after a fork/clone. */ copy_thread()
143 * We want to return into ret_from_sys_call after the _resume. copy_thread()
/linux-4.4.14/drivers/staging/sm750fb/
H A Dddk750_help.c7 /* after driver mapped io registers, use this function first */ ddk750_set_mmio()
/linux-4.4.14/fs/ncpfs/
H A Dncp_fs_i.h13 * all the information we need to work with an inode after creation.
/linux-4.4.14/include/linux/
H A Deeprom_93xx46.h14 * before and after spi transfer.
H A Dpoison.h38 * Placed in the first word before and the first word after an obj.
48 #define POISON_FREE 0x6b /* for use-after-free poisoning */
77 #define FLEX_ARRAY_FREE 0x6c /* for use-after-free poisoning */
H A Dcrash_dump.h45 * is_kdump_kernel() checks whether this kernel is booting after a panic of
50 * return 1 if CONFIG_CRASH_DUMP=y and if kernel is booting after a panic of
59 /* is_vmcore_usable() checks if the kernel is booting after a panic and
H A Dlz4.h31 * dst_len : is the output size, which is returned after compress done
48 * dst_len : is the output size, which is returned after compress done
62 * src_len : is the input size, whcih is returned after decompress done
79 * returned with actual size of decompressed data after
H A Dsuspend.h121 * @prepare() is called right after devices have been suspended (ie. the
130 * @prepare_late is called before disabling nonboot CPUs and after
142 * @wake: Called when the system has just left a sleep state, right after
147 * after @prepare_late and @enter(), even if one of them fails.
153 * that implement @prepare(). If implemented, it is always called after
154 * @enter() and @wake(), even if any of them fails. It is executed after
164 * @end: Called by the PM core right after resuming devices, to indicate to
262 * arch_suspend_enable_irqs - enable IRQs after suspend
309 * Called right after shrinking memory and before freezing devices.
311 * @end: Called by the PM core right after resuming devices, to indicate to
315 * Called right after devices have been frozen and before the nonboot
318 * @finish: Restore the previous state of the platform after the hibernation
320 * mode after the hibernation (the same method is executed in both cases).
321 * Called right after the nonboot CPUs have been enabled and before
325 * Called right after the hibernation image has been saved and before
328 * @enter: Put the system into the low power state after the hibernation image
330 * Called after the nonboot CPUs have been disabled and all of the low
333 * @leave: Perform the first stage of the cleanup after the system sleep state
335 * Called right after the control has been passed from the boot kernel to
340 * Called right after devices have been frozen and before the nonboot
343 * @restore_cleanup: Clean up after a failing image restoration.
344 * Called right after the nonboot CPUs have been enabled and before
H A Damifd.h39 unsigned int step_delay; /* time (in ms) for delay after step */
40 unsigned int settle_time; /* time to settle after dir change */
H A Dsrcu.h112 * call_srcu() - Queue a callback for invocation after an SRCU grace period
115 * @func: function to be invoked after the SRCU grace period
117 * The callback function will be invoked some time after a full SRCU
118 * grace period elapses, in other words after all pre-existing SRCU
121 * critical sections that started after call_srcu() was invoked. SRCU
242 * smp_mb__after_srcu_read_unlock - ensure full ordering after srcu_read_unlock
246 * Call this after srcu_read_unlock, to guarantee that all memory operations
247 * that occur after smp_mb__after_srcu_read_unlock will appear to happen after
H A Dcmdline-parser.h16 #define PF_POWERUP_LOCK 0x02 /* Always locked after reset */
H A Dkern_levels.h19 * Annotation for a "continued" line of log printout (only done after a
H A Dpm.h87 * the device from being registered after it has returned (the driver's
92 * that the PM core can execute it once again (e.g. after a new child has
104 * executed directly after @prepare() and it must ensure the proper
105 * functioning of the device after the system resume.
124 * The PM core executes subsystem-level @complete() after it has executed
131 * proper functioning of the device after the system resume. To this end,
139 * type), but generally the device must be quiescent after subsystem-level
141 * Subsystem-level @suspend() is executed for all devices after invoking
148 * @resume: Executed after waking the system up from a sleep state in which the
157 * Subsystem-level @resume() is executed for all devices after invoking
170 * Subsystem-level @freeze() is executed for all devices after invoking
177 * @thaw: Hibernation-specific, executed after creating a hibernation image OR
178 * if the creation of an image has failed. Also executed after a failing
182 * Subsystem-level @thaw() is executed for all devices after invoking
184 * directly after @freeze() in case of a transition error.
189 * @poweroff: Hibernation-specific, executed after saving a hibernation image.
192 * Subsystem-level @poweroff() is executed for all devices after invoking
198 * @restore: Hibernation-specific, executed after restoring the contents of main
208 * (appropriate for the target system sleep state) after subsystem-level
383 * quiescent after it has returned). Therefore it's better to point the "late"
623 * @sync: Called after successful driver probe.
624 * @dismiss: Called after unsuccessful driver probe and after driver removal.
644 * One transition is triggered by resume(), after a suspend() call; the
673 * the system from a snapshot taken after an earlier FREEZE.
780 /* How to reorder dpm_list after device_move() */
H A Dconcap.h72 cprot may no loger be referenced after calling this */
77 encapsulation protocol may be used after this*/
83 protocol may not call any *dops methods after this. */
H A Drculist_bl.h30 * Note: hlist_bl_unhashed() on the node returns true after this. It is
36 * zero the pprev pointer so list_unhashed() will return true after
58 * Note: hlist_bl_unhashed() on entry does not return true after this,
H A Drculist_nulls.h16 * Note: hlist_nulls_unhashed() on the node return true after this. It is
22 * zero the pprev pointer so list_unhashed() will return true after
50 * Note: hlist_nulls_unhashed() on entry does not return true after this,
H A Drcupdate.h131 * call_rcu() - Queue an RCU callback for invocation after a grace period.
133 * @func: actual callback function to be invoked after the grace period
135 * The callback function will be invoked some time after a full grace
136 * period elapses, in other words after all pre-existing RCU read-side
139 * that started after call_rcu() was invoked. RCU read-side critical
150 * executed a memory barrier after the call_rcu() but before the beginning
173 * call_rcu_bh() - Queue an RCU for invocation after a quicker grace period.
175 * @func: actual callback function to be invoked after the grace period
177 * The callback function will be invoked some time after a full grace
178 * period elapses, in other words after all currently executing RCU
197 * call_rcu_sched() - Queue an RCU for invocation after sched grace period.
199 * @func: actual callback function to be invoked after the grace period
201 * The callback function will be invoked some time after a full grace
202 * period elapses, in other words after all currently executing RCU
262 * @func: actual callback function to be invoked after the grace period
264 * The callback function will be invoked some time after a full grace
265 * period elapses, in other words after all currently executing RCU
638 * reordering the code that initializes the structure after the pointer
675 * the data, or after a synchronize_rcu() returns. This can be useful
676 * when tearing down multi-linked structures after a grace period
821 * synchronize_rcu() is guaranteed to block until after all the other
825 * until after the all the other CPUs exit their critical sections.
1039 * external-to-structure pointer -after- you have completely initialized
1075 * kfree_rcu() - kfree an object after a grace period.
H A Ddtlk.h27 bit goes zero 2-3 usec after
48 /* LPC Port Status Flags (valid only after one of the LPC
H A Dppp-comp.h96 * of an error detected after decompression. This is to avoid infringing
102 #define DECOMP_FATALERROR -2 /* error detected after decomp. */
H A Dscc.h32 unsigned char tailtime; /* Delay after last byte written */
36 unsigned int mintime; /* Minimal offtime after MAXKEYUP timeout (seconds) */
H A Dirqbypass.h42 * @start: Perform any startup operations necessary after add/del (optional)
67 * @start: Perform any startup operations necessary after add/del (optional)
H A Dwait.h259 * wake_up() has to be called after changing any variable that could
298 * wake_up() has to be called after changing any variable that could
325 * wake_up() has to be called after changing any variable that could
329 * 0 if the @condition evaluated to %false after the @timeout elapsed,
330 * 1 if the @condition evaluated to %true after the @timeout elapsed,
383 * @cmd2: the command will be executed after sleep
389 * wake_up() has to be called after changing any variable that could
412 * wake_up() has to be called after changing any variable that could
442 * wake_up() has to be called after changing any variable that could
446 * 0 if the @condition evaluated to %false after the @timeout elapsed,
447 * 1 if the @condition evaluated to %true after the @timeout elapsed,
497 * wake_up() has to be called after changing any variable that could
523 * wake_up() has to be called after changing any variable that could
614 * wake_up_locked() has to be called after changing any variable that could
641 * wake_up_locked() has to be called after changing any variable that could
672 * wake_up_locked() has to be called after changing any variable that could
703 * wake_up_locked() has to be called after changing any variable that could
726 * wake_up() has to be called after changing any variable that could
765 * wake_up() has to be called after changing any variable that could
793 * wake_up() has to be called after changing any variable that could
829 * wake_up() has to be called after changing any variable that could
861 * wake_up() has to be called after changing any variable that could
901 * wake_up() has to be called after changing any variable that could
H A Drculist.h65 * @head: list head to add it after
67 * Insert a new entry after the specified head.
109 * Note: list_empty() on entry does not return true after this,
139 * Note: list_unhashed() on the node return true after this. It is
145 * zero the pprev pointer so list_unhashed() will return true after
313 * Continue to iterate over list of given type, continuing after
325 * Note: list_unhashed() on entry does not return true after this,
434 * @prev: the existing element to add the new element after.
438 * after the specified node while permitting racing traversals.
519 * hlist_for_each_entry_continue_rcu - iterate over a hlist continuing after current point
531 * hlist_for_each_entry_continue_rcu_bh - iterate over a hlist continuing after current point
/linux-4.4.14/include/uapi/linux/netfilter/
H A Dxt_LED.h9 __u32 delay; /* Delay until LED is switched off after trigger */
/linux-4.4.14/include/linux/platform_data/
H A Dspi-omap2-mcspi.h26 /* toggle chip select after every word */
H A Dmmc-pxamci.h12 unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */
H A Dsa11x0-serial.h16 * functions; it is intended to be discarded after boot.
H A Dlp855x.h115 LP8556_COMBINED2, /* pwm + i2c after the shaper block */
121 LP8557_COMBINED1, /* pwm + i2c after the shaper block */
/linux-4.4.14/drivers/scsi/mvsas/
H A Dmv_64xx.h69 /* ports 1-3 follow after this */
72 /* ports 5-7 follow after this */
76 /* ports 1-3 follow after this */
78 /* ports 5-7 follow after this */
84 /* ports 1-3 follow after this */
87 /* ports 5-7 follow after this */
91 /* ports 1-3 follow after this */
94 /* ports 5-7 follow after this */
H A Dmv_94xx.h84 /* ports 1-3 follow after this */
87 /* ports 5-7 follow after this */
91 /* ports 1-3 follow after this */
93 /* ports 5-7 follow after this */
96 /* ports 1-3 follow after this */
99 /* ports 5-7 follow after this */
103 /* phys 1-3 follow after this */
106 /* phys 1-3 follow after this */
/linux-4.4.14/arch/arc/include/uapi/asm/
H A Dsignal.h17 * which allows sigreturn based re-entry into kernel after handling signal.
20 * -TLB Flush (after making the stack page executable)
/linux-4.4.14/arch/m32r/kernel/
H A Dvmlinux.lds.S52 /* will be freed after init */
60 /* freed after init ends here */
/linux-4.4.14/sound/usb/
H A Dhelper.h6 void *snd_usb_find_desc(void *descstart, int desclen, void *after, u8 dtype);
7 void *snd_usb_find_csint_desc(void *descstart, int desclen, void *after, u8 dsubtype);
H A Dhelper.c44 void *snd_usb_find_desc(void *descstart, int desclen, void *after, u8 dtype) snd_usb_find_desc() argument
56 if (p[1] == dtype && (!after || (void *)p > after)) { snd_usb_find_desc()
67 void *snd_usb_find_csint_desc(void *buffer, int buflen, void *after, u8 dsubtype) snd_usb_find_csint_desc() argument
69 unsigned char *p = after; snd_usb_find_csint_desc()
/linux-4.4.14/drivers/base/
H A Dinit.c31 /* These are also core pieces, but must come after the driver_init()
H A Dsyscore.c71 "Interrupts enabled after %pF\n", ops->suspend); syscore_suspend()
107 "Interrupts enabled after %pF\n", ops->resume); syscore_resume()
/linux-4.4.14/arch/sh/include/mach-kfr2r09/mach/
H A Dromimage.h11 /* execute icbi after enabling cache */
/linux-4.4.14/arch/mn10300/kernel/
H A Dvmlinux.lds.S51 /* might get freed after init */
59 /* will be freed after init */
77 /* freed after init ends here */
/linux-4.4.14/tools/testing/selftests/vm/
H A Dthuge-gen.c142 unsigned long before, after; test_mmap() local
151 after = read_free(size); test_mmap()
152 Dprintf("before %lu after %lu diff %ld size %lu\n", test_mmap()
153 before, after, before - after, size); test_mmap()
154 assert(size == getpagesize() || (before - after) == NUM_PAGES); test_mmap()
163 unsigned long before, after; test_shmget() local
182 after = read_free(size); test_shmget()
184 Dprintf("before %lu after %lu diff %ld size %lu\n", test_shmget()
185 before, after, before - after, size); test_shmget()
186 assert(size == getpagesize() || (before - after) == NUM_PAGES); test_shmget()
/linux-4.4.14/drivers/net/ethernet/sfc/
H A Denum.h18 * @LOOPBACK_XGMII: loopback after XMAC
19 * @LOOPBACK_XGXS: loopback within BPX after XGXS
21 * @LOOPBACK_GMII: loopback within BPX after GMAC
25 * @LOOPBACK_XAUI_FAR: loopback within BPX after XAUI serdes
27 * @LOOPBACK_SGMII_FAR: loopback within BPX after SGMII
28 * @LOOPBACK_XFI_FAR: loopback after XFI serdes
/linux-4.4.14/include/linux/usb/
H A Dehci_pdriver.h31 * @port_power_on: set to 1 if the controller needs a power up after
34 * after initialization.
37 * @reset_on_resume: set to 1 if the controller needs to be reset after
H A Dsl811.h12 /* given port_power, msec/2 after power on till power good */
/linux-4.4.14/drivers/usb/image/
H A Dmicrotek.h25 u8 *scsi_status; /* status returned from ep_response after command completion */
/linux-4.4.14/drivers/net/ethernet/altera/
H A Daltera_sgdmahw.h85 * bit 2: interrupt after every descriptor
86 * bit 3: interrupt after last descrip in a chain
116 #define SGDMA_CTRLREG_IDESCRIP BIT(2) /* Interrupt after every descriptor */
117 #define SGDMA_CTRLREG_ILASTD BIT(3) /* Interrupt after last descriptor */
/linux-4.4.14/drivers/net/ethernet/broadcom/bnxt/
H A Dbnxt_nvm_defs.h59 #endif /* Don't add anything after this line */
/linux-4.4.14/net/9p/
H A Dtrans_common.c19 * p9_release_req_pages - Release pages after the transaction.
/linux-4.4.14/kernel/printk/
H A Dbraille.c19 pr_err("need port name after brl=\n"); _braille_console_setup()
/linux-4.4.14/include/linux/netfilter/
H A Dnf_conntrack_ftp.h14 /* Valid seq positions for cmd matching after newline */
/linux-4.4.14/include/linux/power/
H A Dgeneric-adc-battery.h18 * @jitter_delay: delay required after the interrupt to check battery
/linux-4.4.14/arch/arm/mach-omap2/
H A Domap4-restart.c25 /* XXX Should save 'cmd' into scratchpad for use after reboot */ omap44xx_restart()
H A Domap_hwmod_reset.c38 * is enabled. Since internal autogating is disabled by default after
39 * AESS reset, we must enable autogating after the hwmod code resets
H A Dsdrc.c49 * Save SMS registers that need to be restored after off mode.
59 * Restore SMS registers that need to be Restored after off mode.
H A Dwd_timer.c28 * timer. Hence it is required to disable the watchdog after the WDT reset
71 * re-armed after an OCP soft-reset.) Returns -ETIMEDOUT if the reset
/linux-4.4.14/tools/lib/lockdep/uinclude/linux/
H A Dkern_levels.h19 * Annotation for a "continued" line of log printout (only done after a
/linux-4.4.14/tools/perf/tests/
H A Dfdarray.c61 fdarray__fprintf_prefix(fda, " after", stderr); test__fdarray__filter()
82 fdarray__fprintf_prefix(fda, " after", stderr); test__fdarray__filter()
153 fdarray__fprintf_prefix(fda, "after 3rd add", stderr); test__fdarray__add()
157 fdarray__fprintf_prefix(fda, "after 4th add", stderr); test__fdarray__add()
/linux-4.4.14/tools/perf/util/
H A Dtop.h20 * get out after decayed.
H A Dstrbuf.c60 die("`pos' is too far after the end of the buffer"); strbuf_splice()
62 die("`pos + len' is too far after the end of the buffer"); strbuf_splice()
/linux-4.4.14/drivers/scsi/fnic/
H A Dfnic_fip.h23 #define FCOE_CTLR_START_DELAY 2000 /* ms after first adv. to choose FCF */
24 #define FCOE_CTLR_FIPVLAN_TOV 2000 /* ms after FIP VLAN disc */
/linux-4.4.14/arch/x86/include/asm/
H A Dapm.h31 * N.B. We do NOT need a cld after the BIOS call apm_bios_call_asm()
55 * N.B. We do NOT need a cld after the BIOS call apm_bios_call_simple_asm()
H A Diommu_table.h59 * and it will be run after the SWIOTLB and the other IOMMUs
63 * to stop detecting the other IOMMUs after yours has been detected.
84 * list after the detection routine returns a positive number, while the
/linux-4.4.14/arch/xtensa/include/uapi/asm/
H A Dswab.h39 * zero. We are careful to mask values after shifting. __arch_swab16()
43 * inserts an extui instruction after putting this function inline __arch_swab16()
/linux-4.4.14/arch/arc/include/asm/
H A Dhighmem.h18 /* start after vmalloc area */
24 /* start after fixmap area */
H A Datomic.h82 * Explicit full memory barrier needed before/after as \
156 * spin lock/unlock provides the needed smp_mb() before/after \
204 * Explicit full memory barrier needed before/after as \
/linux-4.4.14/include/linux/spi/
H A Dads7846.h30 /* If set to non-zero, after samples are taken this delay is applied
47 * required after the first two */
H A Dds1305.h8 * be sure that Linux (re)initializes this as needed ... after losing
/linux-4.4.14/include/uapi/linux/
H A Dncp_mount.h33 unsigned int time_out; /* How long should I wait after
56 unsigned int time_out; /* How long should I wait after
H A Datmarp.h15 NAK after 30 sec - should go into
H A Dserial.h122 RTS pin after sent*/
125 __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
/linux-4.4.14/arch/s390/kernel/
H A Dvmlinux.lds.S57 /* will be freed after init */
81 __init_end = .; /* freed after init ends here */
/linux-4.4.14/arch/m68k/include/asm/
H A Dswitch_to.h18 * by syscall after the function in the syscall has been called.
22 * to push them onto the stack and read them back right after.
/linux-4.4.14/arch/h8300/include/asm/
H A Dswitch_to.h18 * by syscall after the function in the syscall has been called.
22 * to push them onto the stack and read them back right after.
/linux-4.4.14/tools/arch/sparc/include/asm/
H A Dbarrier_64.h7 * #51. Essentially, if a memory barrier occurs soon after a mispredicted
13 * was one instruction after the branch delay slot and the chip still hung.
/linux-4.4.14/include/linux/mfd/pcf50633/
H A Dbacklight.h22 * Brightness to be used after the driver has been probed.
27 * Brightness limit to be used after the driver has been probed. This is useful
/linux-4.4.14/tools/power/cpupower/bench/
H A Dparse.h26 * sleep time after every round in µs */
28 * load time after every round in µs */
/linux-4.4.14/net/netfilter/
H A Dnf_conntrack_seqadj.c85 if (after(ntohl(sack->start_seq) - seq->offset_before, nf_ct_sack_block_adjust()
93 if (after(ntohl(sack->end_seq) - seq->offset_before, nf_ct_sack_block_adjust()
182 if (after(ntohl(tcph->seq), this_way->correction_pos)) nf_ct_seq_adjust()
187 if (after(ntohl(tcph->ack_seq) - other_way->offset_before, nf_ct_seq_adjust()
225 return after(seq, this_way->correction_pos) ? nf_ct_seq_offset()
/linux-4.4.14/arch/powerpc/lib/
H A Drheap.c155 rh_block_t *after; attach_free_block() local
166 /* Find the blocks immediately before and after the given one attach_free_block()
169 after = NULL; attach_free_block()
185 after = blk; attach_free_block()
188 if (before != NULL && after != NULL) attach_free_block()
196 if (after && e != after->start) attach_free_block()
197 after = NULL; attach_free_block()
200 if (before == NULL && after == NULL) { attach_free_block()
214 if (before != NULL && after == NULL) { attach_free_block()
219 /* Grow the after block backwards */ attach_free_block()
220 if (before == NULL && after != NULL) { attach_free_block()
221 after->start -= size; attach_free_block()
222 after->size += size; attach_free_block()
226 /* Grow the before block, and release the after block */ attach_free_block()
227 before->size += size + after->size; attach_free_block()
228 list_del(&after->list); attach_free_block()
229 release_slot(info, after); attach_free_block()
/linux-4.4.14/drivers/net/wireless/brcm80211/brcmsmac/phy/
H A Dphy_qmath.c106 * the specified shift is -ve. This function return the result after shifting
131 * the specified shift is -ve. This function return the result after shifting
252 /* The qformat of N after normalization. qm_log10()
254 * i.e. after adding the -30 to the qformat the decimal point will be qm_log10()
255 * just rigtht of the MSB. (i.e. after sign bit and 1st MSB). i.e. qm_log10()
264 /* remove the MSB. the MSB is always 1 after normalization. */ qm_log10()
271 /* take the offset as the 16 MSBS after table index. qm_log10()
/linux-4.4.14/arch/powerpc/platforms/cell/spufs/
H A Dspu_restore.c212 * followed by stop-and-signal instruction after restore_complete()
221 * by stop-and-signal instruction after end of restore_complete()
230 * followed by 'br -4' after end of restore restore_complete()
240 * followed by 'br -4' after end of restore code. restore_complete()
249 * by infinite loop after end of restore sequence. restore_complete()
265 * after end of restore code. restore_complete()
274 * after end of restore code. restore_complete()
/linux-4.4.14/drivers/thunderbolt/
H A Dnhi.h34 struct mutex lock; /* must be acquired after nhi->lock */
84 * If ring_stop is called after the packet has been enqueued frame->callback
103 * If ring_stop is called after the packet has been enqueued frame->callback
/linux-4.4.14/drivers/video/fbdev/
H A Dc2p_iplan2.c38 * Array containing the permutation indices of the planar data after c2p
45 * Store a full block of iplan2 data after c2p conversion
58 * Store a partial block of iplan2 data after c2p conversion
H A Dc2p_planar.c38 * Array containing the permutation indices of the planar data after c2p
45 * Store a full block of planar data after c2p conversion
58 * Store a partial block of planar data after c2p conversion
/linux-4.4.14/drivers/md/
H A Ddm-bufio.h75 * pointer and dm_buffer pointer is no longer valid after this call.
80 * Mark a buffer dirty. It should be called after the buffer is modified.
82 * In case of memory pressure, the buffer may be written after
/linux-4.4.14/include/drm/
H A Ddrm_flip_work.h34 * Util to queue up work to run from work-queue context after flip/vblank.
36 * bo's, etc until after vblank. The APIs are all thread-safe.
49 * Callback function to be called for each of the queue'd work items after
/linux-4.4.14/arch/mips/kernel/
H A Dvmlinux.lds.S113 /* will be freed after init */
156 /* freed after init ends here */
161 * no holes after __init_end. */
H A Dhead.S128 /* Set the SP after an empty pt_regs. */
141 * function after setting up the stack and gp registers.
/linux-4.4.14/arch/ia64/include/uapi/asm/
H A Dsigcontext.h23 * be found in ar.bsp after executing a "cover" instruction the context in which the
25 * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
66 sigset_t sc_mask; /* signal mask to restore after handler returns */
/linux-4.4.14/arch/arm/plat-samsung/include/plat/
H A Dpm.h101 * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. s3c_pm_debug_smdkled()
103 * Restore the state of the GPIO pins after sleep, which may involve ensuring s3c_pm_debug_smdkled()
110 * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. s3c_pm_debug_smdkled()
/linux-4.4.14/net/ipv4/
H A Dtcp_recovery.c19 * The current version is only used after recovery starts but can be
53 if (!after(scb->end_seq, tp->snd_una) || tcp_for_write_queue()
73 * b/c the rest are all sent after rack_sent tcp_for_write_queue()
H A Dtcp_input.c405 /* 4. Try to fixup all. It is made immediately after connection enters
443 /* 5. Recalculate window clamp after socket hit its memory bounds. */ tcp_clamp_window()
734 if (after(tp->snd_una, tp->rtt_seq)) { tcp_rtt_estimator()
896 after(TCP_SKB_CB(skb)->end_seq, tp->retransmit_high)) tcp_verify_retransmit_hint()
997 * similar case (end_seq after snd_nxt wrap) as earlier reversed check in
1018 if (after(end_seq, tp->snd_nxt) || !before(start_seq, end_seq)) tcp_is_sackblock_valid()
1028 if (after(start_seq, tp->snd_una)) tcp_is_sackblock_valid()
1035 if (after(end_seq, tp->snd_una)) tcp_is_sackblock_valid()
1042 if (!after(end_seq, tp->undo_marker)) tcp_is_sackblock_valid()
1068 if (!after(end_seq_0, end_seq_1) && tcp_check_dsack()
1079 !after(end_seq_0, prior_snd_una) && tcp_check_dsack()
1080 after(end_seq_0, tp->undo_marker)) tcp_check_dsack()
1114 in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq) && tcp_match_skb_to_sack()
1118 after(TCP_SKB_CB(skb)->end_seq, start_seq)) { tcp_match_skb_to_sack()
1120 in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq); tcp_match_skb_to_sack()
1165 after(end_seq, tp->undo_marker)) tcp_sacktag_one()
1172 if (!after(end_seq, tp->snd_una)) tcp_sacktag_one()
1197 if (!after(end_seq, tp->high_seq)) tcp_sacktag_one()
1274 * code can come after this skb later on it's better to keep tcp_shifted_skb()
1356 if (!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una)) tcp_shift_skb_data()
1367 in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq) && tcp_shift_skb_data()
1381 if (!after(TCP_SKB_CB(skb)->end_seq, start_seq)) tcp_shift_skb_data()
1390 in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq); tcp_shift_skb_data()
1393 * if (!after(TCP_SKB_CB(skb)->end_seq, end_seq)), tcp_shift_skb_data()
1433 if (!after(TCP_SKB_CB(skb)->seq + len, tp->snd_una)) tcp_shift_skb_data()
1557 if (after(TCP_SKB_CB(skb)->end_seq, skip_to_seq)) tcp_for_write_queue_from()
1651 !after(sp[used_sacks].end_seq, tp->snd_una)) tcp_sacktag_write_queue()
1663 if (!after(sp[used_sacks].end_seq, prior_snd_una)) tcp_sacktag_write_queue()
1672 if (after(sp[j].start_seq, sp[j + 1].start_seq)) { tcp_sacktag_write_queue()
1713 after(end_seq, cache->start_seq)) { tcp_sacktag_write_queue()
1727 if (!after(end_seq, cache->end_seq)) tcp_sacktag_write_queue()
1882 !after(tp->high_seq, tp->snd_una) || tcp_enter_loss()
1922 /* Timeout in disordered state after receiving substantial DUPACKs
2059 * F.e. after RTO, when all the queue is considered as lost,
2134 /* If a thin stream is detected, retransmit after first tcp_time_to_recover()
2193 if (after(TCP_SKB_CB(skb)->end_seq, loss_high)) tcp_for_write_queue_from()
2428 /* Undo during loss recovery after partial ACK or using F-RTO. */ tcp_try_undo_loss()
2684 if (after(tp->snd_nxt, tp->high_seq)) { tcp_process_loss()
2691 if (after(tp->snd_nxt, tp->high_seq)) tcp_process_loss()
2706 if (after(tp->snd_nxt, tp->high_seq) && is_dupack) tcp_process_loss()
2714 /* Undo during fast recovery after partial ACK. */ tcp_try_undo_partial()
3003 /* Restart timer after forward progress on connection.
3021 /* Offset the time elapsed after installing regular RTO */ tcp_rearm_rto()
3048 /* Stop if ER is disabled after the delayed ER timer is scheduled */ tcp_resume_early_retransmit()
3063 BUG_ON(!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una)); tcp_tso_acked()
3125 if (after(scb->end_seq, tp->snd_una)) { tcp_clean_rtx_queue()
3127 !after(tp->snd_una, scb->seq)) tcp_clean_rtx_queue()
3152 if (!after(scb->end_seq, tp->high_seq)) tcp_clean_rtx_queue()
3213 !after(tp->mtu_probe.probe_seq_end, tp->snd_una))) { tcp_clean_rtx_queue()
3236 * after when the head was last (re)transmitted. Otherwise the tcp_clean_rtx_queue()
3278 if (!after(TCP_SKB_CB(tcp_send_head(sk))->end_seq, tcp_wnd_end(tp))) { tcp_ack_probe()
3323 return after(ack, tp->snd_una) || tcp_may_update_window()
3324 after(ack_seq, tp->snd_wl1) || tcp_may_update_window()
3458 if (tp->rx_opt.saw_tstamp && !after(seq, tp->rcv_wup)) { tcp_replace_ts_recent()
3473 * ack is after tlp_high_seq.
3486 } else if (after(ack, tp->tlp_high_seq)) { tcp_process_tlp_ack()
3546 if (after(ack, tp->snd_nxt)) tcp_ack()
3553 if (after(ack, prior_snd_una)) { tcp_ack()
3560 /* ts_recent update must be made after we are sure that the packet tcp_ack()
3566 if (!(flag & FLAG_SLOWPATH) && after(ack, prior_snd_una)) { tcp_ack()
3658 SOCK_DEBUG(sk, "Ack %u after %u:%u\n", ack, tp->snd_una, tp->snd_nxt); tcp_ack()
3906 * states that events when retransmit arrives after original data are rare.
3945 * fits to the window after truncation to the window. Acceptability
3958 !after(seq, tp->rcv_nxt + tcp_receive_window(tp)); tcp_sequence()
4072 if (!after(seq, sp->end_seq) && !after(sp->start_seq, end_seq)) { tcp_sack_extend()
4075 if (after(end_seq, sp->end_seq)) tcp_sack_extend()
4124 if (after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) tcp_send_dupack()
4244 * Before queueing skb @from after @to, try to merge them
4286 if (after(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) tcp_ofo_queue()
4297 if (!after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) { tcp_ofo_queue()
4394 /* Common case: data arrive in order after hole. */ tcp_data_queue_ofo()
4401 if (!after(TCP_SKB_CB(skb1)->seq, seq)) tcp_data_queue_ofo()
4412 if (!after(end_seq, TCP_SKB_CB(skb1)->end_seq)) { tcp_data_queue_ofo()
4420 if (after(seq, TCP_SKB_CB(skb1)->seq)) { tcp_data_queue_ofo()
4443 if (!after(end_seq, TCP_SKB_CB(skb1)->seq)) tcp_data_queue_ofo()
4615 if (!after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) { tcp_data_queue()
4642 /* If window is closed, drop tail of packet. But after tcp_data_queue()
4793 after(TCP_SKB_CB(skb)->seq, end) || tcp_collapse_ofo_queue()
4806 if (after(TCP_SKB_CB(skb)->end_seq, end)) tcp_collapse_ofo_queue()
5003 if (after(tp->copied_seq, ptr)) tcp_check_urg()
5020 if (tp->urg_data && !after(ptr, tp->urg_seq)) tcp_check_urg()
5223 * receive procedure patterned after RFC793 to handle all cases.
5263 !after(TCP_SKB_CB(skb)->ack_seq, tp->snd_nxt)) { tcp_rcv_established()
5538 if (!after(TCP_SKB_CB(skb)->ack_seq, tp->snd_una) || tcp_rcv_synsent_state_process()
5539 after(TCP_SKB_CB(skb)->ack_seq, tp->snd_nxt)) tcp_rcv_synsent_state_process()
5618 * Change state from SYN-SENT only after copied_seq tcp_rcv_synsent_state_process()
5633 /* Save one ACK. Data will be ready after tcp_rcv_synsent_state_process()
5929 after(TCP_SKB_CB(skb)->end_seq - th->fin, tp->rcv_nxt))) { tcp_rcv_state_process()
5987 after(TCP_SKB_CB(skb)->end_seq - th->fin, tp->rcv_nxt)) { tcp_rcv_state_process()
/linux-4.4.14/drivers/sh/intc/
H A Dvirq-debugfs.c6 * Modelled after arch/powerpc/kernel/irq.c.
/linux-4.4.14/drivers/media/dvb-frontends/
H A Dmn88472.h40 /* Everything after that is returned by the driver. */
H A Dmn88473.h30 /* Everything after that is returned by the driver. */
H A Dix2505v.h44 /* delay after tune */
/linux-4.4.14/drivers/net/ethernet/chelsio/cxgb/
H A Dvsc7326_reg.h231 TxMultipleColl = 0x1e, // # frames tx after multiple collisions
244 TxSingleColl = 0x2b, // # frames tx after single collision
245 TxBackoff2 = 0x2c, // # frames tx ok after 2 backoffs/collisions
246 TxBackoff3 = 0x2d, // after 3 backoffs/collisions
247 TxBackoff4 = 0x2e, // after 4
248 TxBackoff5 = 0x2f, // after 5
249 TxBackoff6 = 0x30, // after 6
250 TxBackoff7 = 0x31, // after 7
251 TxBackoff8 = 0x32, // after 8
252 TxBackoff9 = 0x33, // after 9
253 TxBackoff10 = 0x34, // after 10
254 TxBackoff11 = 0x35, // after 11
255 TxBackoff12 = 0x36, // after 12
256 TxBackoff13 = 0x37, // after 13
257 TxBackoff14 = 0x38, // after 14
258 TxBackoff15 = 0x39, // after 15
/linux-4.4.14/arch/sparc/prom/
H A Dbootstr_64.c13 * after another in the .data section. Do not move this stuff into
/linux-4.4.14/block/partitions/
H A Dmac.h29 /* there is more stuff after this that we don't need */
/linux-4.4.14/lib/
H A Ddebug_locks.c22 * shut up after that.
H A Dtest_kasan.c90 pr_info("out-of-bounds after krealloc more\n"); kmalloc_oob_krealloc_more()
109 pr_info("out-of-bounds after krealloc less\n"); kmalloc_oob_krealloc_less()
227 pr_info("use-after-free\n"); kmalloc_uaf()
243 pr_info("use-after-free in memset\n"); kmalloc_uaf_memset()
259 pr_info("use-after-free after another kmalloc\n"); kmalloc_uaf2()
H A Dpercpu-refcount.c150 "percpu ref (%pf) <= 0 (%ld) after switching to atomic", percpu_ref_switch_to_atomic_rcu()
176 percpu_ref_get(ref); /* put after confirmation */ __percpu_ref_switch_to_atomic()
181 * progress. @confirm_switch must be invoked after the __percpu_ref_switch_to_atomic()
189 percpu_ref_get(ref); /* put after confirmation */ __percpu_ref_switch_to_atomic()
213 * will be invoked after the switching is complete.
216 * after at least one full sched RCU grace period has passed but this is an
287 * called after @ref is seen as dead from all CPUs at which point all
296 * after at least one full sched RCU grace period has passed but this is an
H A Dtimerqueue.c93 * timerqueue_iterate_next - Returns the timer after the provided timer
97 * Provides the timer that is after the given node. This is used, when
/linux-4.4.14/lib/zlib_inflate/
H A Dinfutil.c35 /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */ zlib_inflate_blob()
/linux-4.4.14/net/atm/
H A Dlec.h58 * field in h_type field. Data follows immediately after header.
109 * after the first LEC_ARP_REQUEST (C13)
129 * Time limit ot wait to receive an LE_FLUSH_RESPONSE after the
133 /* The time since sending a frame to the bus after which the
/linux-4.4.14/kernel/locking/
H A Dpercpu-rwsem.c31 * assumes that percpu_free_rwsem() is safe after kzalloc(). percpu_free_rwsem()
38 brw->fast_read_ctr = NULL; /* catch use after free bugs */ percpu_free_rwsem()
64 * come after the first percpu_down_read() and create the deadlock.
153 * but only after another gp pass; this adds the necessary barrier percpu_up_write()
H A Dqspinlock_paravirt.h160 * Wait for node->locked to become true, halt the vcpu after a short spin.
197 * If the locked flag is still not set after wakeup, it is a pv_wait_node()
213 * Called after setting next->locked = 1 when we're the lock owner.
245 * Wait for l->locked to become clear; halt the vcpu after a short spin.
298 * wakeup and so the vCPU should wait again after spinning for pv_wait_head()
339 * pv_unhash *after* we've read the lock being _Q_SLOW_VAL. __pv_queued_spin_unlock()
H A Dmcs_spinlock.h26 * subsequent operations happen after the lock is acquired.
51 * used after mcs_lock.
/linux-4.4.14/include/media/
H A Dm5mols.h24 * to be called after enabling and before disabling
H A Dvideobuf-vmalloc.h28 * after mmap() on some cases */
/linux-4.4.14/include/net/netfilter/
H A Dnf_conntrack_seqadj.h11 * @offset_after: sequence number offset after last modification
/linux-4.4.14/include/sound/
H A Dwm8993.h35 /* Delay to add for microphones to stabalise after power up */
/linux-4.4.14/include/trace/events/
H A Dcontext_tracking.h30 * This event occurs when the kernel resumes to userspace after
H A Dworkqueue.h70 * which happens immediately after queueing unless @max_active limit
106 * workqueue_execute_end - called immediately after the workqueue callback
H A Dirq.h72 * irq_handler_exit - called immediately after the irq action handler returns
135 * softirq_exit - called immediately after the softirq handler returns
/linux-4.4.14/include/linux/sched/
H A Drt.h56 * Timeslices get refilled after they expire.
/linux-4.4.14/arch/sh/include/mach-ecovec24/mach/
H A Dromimage.h11 /* execute icbi after enabling cache */
/linux-4.4.14/arch/m68k/kernel/
H A Dearly_printk.c53 * after init sections are discarded (for platforms that use it).
/linux-4.4.14/arch/frv/kernel/
H A Dpm-mb93093.c38 * Cleanup interrupt masks, etc after wakeup by power switch
/linux-4.4.14/arch/arm/mach-s3c24xx/
H A Danubis.h34 /* start peripherals off after the S3C2410 */
H A Dosiris.h30 /* start peripherals off after the S3C2410 */
/linux-4.4.14/arch/arm/mach-ebsa110/
H A Dleds.c68 * until after subsystem_init.
/linux-4.4.14/sound/usb/line6/
H A Dplayback.h24 * buffer is cleared after the data have been read, but there must be a better
/linux-4.4.14/tools/arch/sh/include/asm/
H A Dbarrier.h13 * Legacy SH cores typically require a sequence of 8 nops after
/linux-4.4.14/tools/include/linux/
H A Dlist.h13 * Note: list_empty on the range of entries does not return true after this,
/linux-4.4.14/drivers/media/usb/dvb-usb/
H A Dm920x.h52 set the R/W bit to 1 when sending the slave's address after the
56 clock cycle, after every byte but the last. This flags only makes
/linux-4.4.14/drivers/net/wireless/ath/ath10k/
H A Dtestmode_i.h17 /* "API" level of the ath10k testmode interface. Bump it after every
22 /* Bump this after every _compatible_ interface change, for example
/linux-4.4.14/arch/xtensa/include/asm/
H A Drwsem.h78 * unlock after reading
91 * unlock after writing
/linux-4.4.14/arch/alpha/include/asm/
H A Dcacheflush.h23 /* We need to flush the kernel's icache after loading modules. The
38 /* We need to flush the userspace icache after setting breakpoints in
/linux-4.4.14/net/batman-adv/
H A Dhard-interface.h42 * enum batadv_hard_if_cleanup - Cleanup modi for soft_iface after slave removal
44 * @BATADV_IF_CLEANUP_AUTO: Delete soft-interface after last slave was removed
/linux-4.4.14/fs/omfs/
H A Domfs_fs.h35 __be32 h_body_size; /* size of useful data after header */
72 __be64 e_blocks; /* number of blocks after e_cluster */
/linux-4.4.14/include/asm-generic/
H A Drwsem.h81 * unlock after reading
93 * unlock after writing
/linux-4.4.14/arch/score/kernel/
H A Dvmlinux.lds.S68 /* will be freed after init */
86 /* freed after init ends here */
/linux-4.4.14/arch/sh/include/asm/
H A Drwsem.h73 * unlock after reading
86 * unlock after writing
/linux-4.4.14/arch/sparc/include/asm/
H A Dbarrier_64.h5 * #51. Essentially, if a memory barrier occurs soon after a mispredicted
11 * was one instruction after the branch delay slot and the chip still hung.
H A Drwsem.h73 * unlock after reading
85 * unlock after writing
/linux-4.4.14/arch/metag/include/asm/
H A Dbarrier.h62 * after the fence on this thread (and to prevent the ensuing cache-memory
63 * incoherence). It is therefore ineffective if used after and on the same
/linux-4.4.14/arch/mips/vdso/
H A Dvdso.lds.S83 * The ABI flags header must exist directly after the PT_INTERP header,
84 * so we must explicitly place the PT_MIPS_REGINFO header after it to
/linux-4.4.14/arch/blackfin/kernel/
H A Dkgdb_test.c33 pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); kgdb_l1_test()
47 pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); kgdb_l2_test()
/linux-4.4.14/arch/blackfin/lib/
H A Dins.S56 * can be interrupted at any time (even after they have been issued on to the
57 * external bus), and re-issued after the interrupt occurs.
/linux-4.4.14/tools/testing/selftests/firmware/
H A Dfw_filesystem.sh62 # This should succeed via kernel load or will fail after 1 second after
/linux-4.4.14/drivers/net/wireless/ath/wcn36xx/
H A Dwcn36xx.h123 * HW after first config_bss call and must be used in delete_bss and
148 * @sta_index: STA index is returned from HW after config_sta call and is
150 * @dpu_desc_index: DPU descriptor index is returned from HW after config_sta
152 * @bss_sta_index: STA index is returned from HW after config_bss call and is
154 * @bss_dpu_desc_index: DPU descriptor index is returned from HW after
210 * that all messages are sent one after another
/linux-4.4.14/scripts/kconfig/
H A Dqconf.h126 ConfigItem(ConfigList *parent, ConfigItem *after, struct menu *m, bool v) ConfigItem() argument
127 : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false) ConfigItem()
131 ConfigItem(ConfigItem *parent, ConfigItem *after, struct menu *m, bool v) ConfigItem() argument
132 : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false) ConfigItem()
136 ConfigItem(ConfigList *parent, ConfigItem *after, bool v) ConfigItem() argument
137 : Parent(parent, after), nextItem(0), menu(0), visible(v), goParent(true) ConfigItem()
/linux-4.4.14/arch/blackfin/include/asm/
H A Dbfin_ppi.h91 #define EPPI_HCNT_VALUE 0x0000FFFF /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */
93 #define EPPI_HDLY_VALUE 0x0000FFFF /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */
95 #define EPPI_VCNT_VALUE 0x0000FFFF /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */
97 #define EPPI_VDLY_VALUE 0x0000FFFF /* Number of lines to wait after the start of a new frame before starting to read/transmit data */
156 #define EPPI_FS2_WLVB_F2VBAD 0xFF000000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */
158 #define EPPI_FS2_WLVB_F1VBAD 0x0000FF00 /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */
/linux-4.4.14/drivers/i2c/algos/
H A Di2c-algo-pca.c61 * returns after the start condition has occurred
76 * return after the repeated start condition has occurred
91 * returns after the stop condition has been generated
109 * returns after the address has been sent
134 * Returns after the byte has been transmitted
164 * Returns after next byte has arrived.
260 DEB2("NOT ACK received after SLA+W\n"); pca_xfer()
285 DEB2("NOT ACK received after SLA+R\n"); pca_xfer()
291 DEB2("NOT ACK received after data byte\n"); pca_xfer()
318 DEB2("NOT ACK sent after data byte received. " pca_xfer()
/linux-4.4.14/arch/mips/cavium-octeon/executive/
H A Dcvmx-interrupt-decodes.c72 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
93 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
116 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
138 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
160 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
183 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
213 /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ __cvmx_interrupt_gmxx_rxx_int_en_enable()
/linux-4.4.14/drivers/usb/host/
H A Dehci-timer.c60 * handled after 2 ms at most, which is okay. In addition to this, we
117 /* Poll again later, but give up after about 2-4 ms */ ehci_poll_ASS()
135 /* Turn off the schedule after a while */ ehci_poll_ASS()
142 /* Turn off the async schedule after a brief delay */ ehci_disable_ASE()
163 /* Poll again later, but give up after about 2-4 ms */ ehci_poll_PSS()
181 /* Turn off the schedule after a while */ ehci_poll_PSS()
188 /* Turn off the periodic schedule after a brief delay */ ehci_disable_PSE()
200 /* Give up after a few milliseconds */ ehci_handle_controller_death()
351 * after the watchdog timer expired (_way_ late, so we'll ehci_iaa_watchdog()
/linux-4.4.14/drivers/media/usb/gspca/m5602/
H A Dm5602_s5k83a.h10 * v4l2 interface modeled after the V4L2 driver
106 /* The following sequence is useless after a clean boot
107 but is necessary after resume from suspend */
158 (this is value after boot, but after tries can be different) */
H A Dm5602_sensor.h10 * v4l2 interface modeled after the V4L2 driver
/linux-4.4.14/kernel/rcu/
H A Dsync.c134 * rcu_sync_exit(), so that it is invoked after a grace period following the
141 * readers back onto their fastpaths (after a grace period). If both
170 * We're at least a GP after rcu_sync_exit(); eveybody will now rcu_sync_func()
180 * rcu_sync_exit() - Allow readers back onto fast patch after grace period
184 * now allow readers to make use of their fastpaths after a grace period
/linux-4.4.14/drivers/scsi/
H A Dosst_options.h22 /* If OSST_IN_FILE_POS is nonzero, the driver positions the tape after the
66 /* If OSST_TWO_FM is non-zero, the driver writes two filemarks after a
86 read or write command after the device is opened. The door is opened
H A Dst_options.h23 /* If ST_IN_FILE_POS is nonzero, the driver positions the tape after the
58 /* If ST_TWO_FM is non-zero, the driver writes two filemarks after a
78 read or write command after the device is opened. The door is opened
/linux-4.4.14/drivers/message/fusion/lsi/
H A Dmpi_log_fc.h59 MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */
65 MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */
66 MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */
/linux-4.4.14/drivers/mfd/
H A D88pm80x.c43 * pm800 and pm805. would remove it after HW chip fixes the issue.
108 * remove it after HW chip fixes the issue. pm80x_init()
125 * would remove it after HW chip fixes the issue. pm80x_deinit()
/linux-4.4.14/drivers/gpu/drm/i915/
H A Ddvo.h54 * Called to allow the output a chance to create properties after the
90 * Callback for setting up a video mode after fixups have been made.
94 * after this function is called.
/linux-4.4.14/arch/cris/arch-v10/kernel/
H A Dprocess.c48 * into an eternal loop, and the watchdog will reset the CPU after 0.1s
120 childregs->r10 = 0; /* child returns 0 after a fork/clone */ copy_thread()
126 /* we want to return into ret_from_sys_call after the _resume */ copy_thread()
/linux-4.4.14/net/dccp/ccids/lib/
H A Dpacket_history.h69 /* Number of packets to wait after a missing packet (RFC 4342, 6.1) */
102 * tfrc_rx_hist_index - index to reach n-th entry after loss_start
119 * tfrc_rx_hist_entry - return the n-th history entry after loss_start
/linux-4.4.14/fs/ntfs/
H A Dattrib.h38 * @is_first: if true ntfs_attr_lookup() begins search with @attr, else after
47 * the search begins after @attr. This is so that, after the first call to one
/linux-4.4.14/arch/sh/lib/
H A Dmcount.S41 * addresses for kernel stacks are anywhere after the bss
42 * (after __bss_stop) and anywhere in init_thread_union (init_stack).
192 * Place new labels either after the ftrace_stub body, or before
/linux-4.4.14/arch/metag/mm/
H A Dhugetlbpage.c111 * Look for an unmapped area starting after another hugetlb vma.
166 /* space after a huge vma in 2nd level page table? */ hugetlb_get_unmapped_area_existing()
219 * Look for an existing hugetlb vma with space after it (this is to to hugetlb_get_unmapped_area()
/linux-4.4.14/arch/arm/mach-mmp/
H A Dpm-mmp2.c178 printk(KERN_INFO "%s: after suspend\n", __func__); mmp2_pm_enter()
187 * Called after processes are frozen, but before we shut down devices.
197 * Called after devices are re-setup, but before processes are thawed.
/linux-4.4.14/tools/lib/traceevent/
H A Dtrace-seq.c31 * a trace_seq structure after it was destroyed.
37 "Usage of trace_seq after it was destroyed")) \
242 fprintf(fp, "%s\n", "Usage of trace_seq after it was destroyed"); trace_seq_do_fprintf()
/linux-4.4.14/tools/testing/selftests/futex/functional/
H A Dfutex_requeue_pi_signal_restart.c12 * before and after the requeue. The first should be restarted by the
92 requeued.val ? "after" : "prior to"); handle_signal()
203 * Signal the waiter after requeue, waiter should return from main()
/linux-4.4.14/tools/usb/usbip/libsrc/
H A Dlist.h52 * @head: list head to add it after
54 * Insert a new entry after the specified head.
82 * Note: list_empty() on entry does not return true after this, the entry is
/linux-4.4.14/drivers/net/ethernet/i825xx/
H A Dsun3_82586.h61 unsigned char busy; /* 586 clears after successful init */
90 #define RUC_RESUME 0x0020 /* resume RU after suspend */
97 #define CUC_RESUME 0x02 /* resume after suspend */
143 #define RFD_SUSP 0x40 /* last: suspend RU after */
198 #define CMD_SUSPEND 0x4000 /* suspend CU after this CB */
199 #define CMD_INT 0x2000 /* generate interrupt after execution */
/linux-4.4.14/drivers/usb/usbip/
H A Dstub.h48 * priv_tx : linked to this after the completion of a urb.
49 * priv_free: linked to this after the sending of the result.
/linux-4.4.14/drivers/i2c/
H A Di2c-boardinfo.c50 * The I2C devices will be created later, after the adapter for the relevant
67 /* dynamic bus numbers will be assigned after the last static one */ i2c_register_board_info()
/linux-4.4.14/drivers/gpu/host1x/hw/
H A Dhw_host1x01_channel.h36 * <x>_<y>_<z>_f(void) : Returns the constant value <z> after being shifted
41 * <x> value 'r' after being shifted to place its LSB at bit 0.
H A Dhw_host1x02_channel.h36 * <x>_<y>_<z>_f(void) : Returns the constant value <z> after being shifted
41 * <x> value 'r' after being shifted to place its LSB at bit 0.
H A Dhw_host1x04_channel.h36 * <x>_<y>_<z>_f(void) : Returns the constant value <z> after being shifted
41 * <x> value 'r' after being shifted to place its LSB at bit 0.
/linux-4.4.14/drivers/media/i2c/smiapp/
H A Dsmiapp-quirk.h29 * @post_poweron: Called always after the sensor has been fully powered on.
31 * @post_streamon: Called right after stopping streaming.
/linux-4.4.14/drivers/net/wireless/ti/wl18xx/
H A Dscan.h97 /* send SCAN_REPORT_EVENT in periodic scans after each cycle
103 /* Should periodic scan stop after a report event was created.
/linux-4.4.14/drivers/net/ethernet/mellanox/mlx5/core/
H A Den_txrx.c46 /* ensure cqe content is read after cqe ownership bit */ mlx5e_get_cqe()
73 /* avoid losing completion event during/after polling cqs */ mlx5e_napi_poll()
/linux-4.4.14/drivers/net/ethernet/stmicro/stmmac/
H A Dmmc.h31 /* When set, do not roll over zero after reaching the max value*/
33 #define MMC_CNTRL_RESET_ON_READ 0x4 /* Reset after reading */
/linux-4.4.14/drivers/gpu/drm/msm/dsi/pll/
H A Ddsi_pll.c22 * Keep track of their status to turn on/off after set rate success. dsi_pll_enable()
30 DBG("DSI PLL %s after sequence #%d", dsi_pll_enable()
/linux-4.4.14/drivers/gpu/drm/msm/hdmi/
H A Dhdmi_phy_8x60.c80 /* Write to HIGH after PLL power down de-assert: */ hdmi_phy_8x60_powerup()
87 /* Enable PLL lock detect, PLL lock det will go high after lock hdmi_phy_8x60_powerup()
/linux-4.4.14/arch/x86/boot/
H A Dcmdline.c38 st_wordstart, /* Start of word/after whitespace */ __cmdline_find_option()
109 st_wordstart, /* Start of word/after whitespace */ __cmdline_find_option_bool()
/linux-4.4.14/block/
H A Dblk-exec.c31 * the rq pointer) could be invalid right after this complete() blk_end_sync_rq()
65 * be resued after dying flag is set blk_execute_rq_nowait()
/linux-4.4.14/arch/alpha/lib/
H A Dstrrchr.S53 /* Mask out character matches after terminator */
60 and t3, t4, t3 # e0 : mask out char matches after null
/linux-4.4.14/net/sctp/
H A Dssnmap.c90 /* Start 'in' stream just after the map header. */ sctp_ssnmap_init()
94 /* Start 'out' stream just after 'in'. */ sctp_ssnmap_init()
/linux-4.4.14/security/apparmor/include/
H A Dapparmor.h100 * aa_dfa_null_transition - step to next state after null character
104 * aa_dfa_null_transition transitions to the next state after a null
/linux-4.4.14/include/media/blackfin/
H A Dppi.h50 u32 hdelay; /* delay after the HSYNC in pixels */
51 u32 vdelay; /* delay after the VSYNC in lines */
/linux-4.4.14/arch/powerpc/kernel/
H A Dudbg.c159 * Called by setup_system after ppc_md->probe and ppc_md->early_init.
160 * Call it again after setting udbg_putc in ppc_md->setup_arch.
/linux-4.4.14/arch/powerpc/platforms/44x/
H A Dcanyonlands.c105 /* Wait for a while after reset */ ppc460ex_canyonlands_fixup()
113 * source after USB reset. In this configuration gpio16 will be ppc460ex_canyonlands_fixup()
/linux-4.4.14/arch/mips/include/asm/
H A Dmc146818-time.h23 * called 500 ms after the second nowtime has started, because when
29 * sets the minutes. Usually you'll only notice that after reboot!
/linux-4.4.14/arch/nios2/boot/compressed/
H A Dhead.S51 /* flush the data cache after moving */
87 /* flush all data cache after decompressing */
/linux-4.4.14/arch/powerpc/boot/
H A Dmktree.c25 * bytes allocated after the _start label used by the boot rom (see
32 uint32_t bb_debug_flag; /* Run debugger or image after load */
/linux-4.4.14/arch/ia64/include/asm/
H A Drwsem.h67 * unlock after reading
79 * unlock after writing
/linux-4.4.14/drivers/staging/rdma/hfi1/
H A Dpcie.c77 * devdata is not yet allocated, and is not allocated until after this
156 * Release regions should be called after the disable. OK to hfi1_pcie_cleanup()
164 * fields required to re-initialize after a chip reset, or for
216 * Save BARs and command to rewrite after device reset. hfi1_pcie_ddinit()
235 * Do PCIe cleanup related to dd, after chip-specific cleanup, etc. Just prior
445 /* restore command and BARs after a reset has wiped them out */ restore_pci_variables()
625 hfi1_init(dd, 1); /* same as re-init after reset */ pci_resume()
773 * Steps to be done after the PCIe firmware is downloaded and
825 * The following routine does a 1s wait after the reset is dropped trigger_sbr()
828 * delay after a reset is required. Per spec requirements, trigger_sbr()
829 * the link is either working or not after that point. trigger_sbr()
954 * just after the firmware load do_pcie_gen3_transition()
975 * will be performed automatically after the SBR when the target do_pcie_gen3_transition()
1163 "%s: read of VendorID failed after SBR, err %d\n", do_pcie_gen3_transition()
1169 dd_dev_info(dd, "%s: VendorID is all 1s after SBR\n", __func__); do_pcie_gen3_transition()
1184 * This is the first CSR read after the SBR. If the read returns do_pcie_gen3_transition()
1187 * Once we're sure we can read and write, clear the DC reset after do_pcie_gen3_transition()
/linux-4.4.14/drivers/usb/gadget/function/
H A Du_fs.h102 * This state is set after closing all functionfs files, when
112 * completed, even after functionfs files closure.
119 * unrecoverable error is situation when after reading strings
174 * after all, maybe we just need some spinlock for that?
/linux-4.4.14/drivers/staging/rtl8723au/os_dep/
H A Dmlme_linux.c75 /* Do it first for tx broadcast pkt after disconnection issue! */ rtw_os_indicate_disconnect23a()
/linux-4.4.14/drivers/isdn/hardware/eicon/
H A Dpkmaint.h36 after is restored by "poppack.h"
/linux-4.4.14/drivers/media/pci/pt1/
H A Dva1j5jf8007s.h43 /* must be called after va1j5jf8007t_attach */
H A Dva1j5jf8007t.h43 /* must be called after va1j5jf8007s_attach */
/linux-4.4.14/drivers/net/wireless/libertas/
H A Dmesh.h26 /* Mesh SSID is only programmed after successful init */ lbs_mesh_activated()

Completed in 8040 milliseconds

1234567891011>>