| /linux-4.1.27/arch/arm/mach-mmp/ |
| D | clock-pxa910.c | 39 static APBC_CLK(pwm2, PWM2, 1, 13000000);
|
| D | clock-pxa168.c | 46 static APBC_CLK(pwm2, PWM2, 1, 13000000);
|
| D | pxa168.c | 101 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
|
| D | pxa910.c | 140 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
|
| /linux-4.1.27/Documentation/devicetree/bindings/clock/ |
| D | pwm-clock.txt | 25 pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
|
| /linux-4.1.27/Documentation/hwmon/ |
| D | w83795 | 65 43 | FANCTL2 | 11h (bank 2) | pwm2
118 35 | FANCTL2 | 11h (bank 2) | pwm2
|
| D | max6639 | 39 pwm2 RW Fan 2 target duty cycle (0..255)
|
| D | w83781d | 189 782d and 783s datasheets differ on which is pwm1 and which is pwm2.
192 782d and 783s pin is programmable for fan3 input or pwm2 output;
194 If pwm2 is enabled (with echo 255 1 > pwm2), then
|
| D | f71882fg | 137 All of the automatic modes require that pwm1 corresponds to fan1, pwm2 to
|
| D | lm93 | 137 and pwm2 are used to set the manual duty cycle; each is an integer (0-255)
141 PWM mode is disabled, the value of pwm1 and pwm2 indicates the current duty
|
| D | f71805f | 165 Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to
|
| D | w83627ehf | 91 temp2 -> pwm2
|
| /linux-4.1.27/arch/arm/boot/dts/ |
| D | pxa27x.dtsi | 27 pwm2: pwm@40c00000 { label
|
| D | spear320-hmi.dts | 86 pwm2 {
88 st,function = "pwm2";
|
| D | imx6dl-tx6dl-comtft.dts | 26 pwms = <&pwm2 0 500000 0>;
|
| D | imx6q-tx6q-1010-comtft.dts | 26 pwms = <&pwm2 0 500000 0>;
|
| D | rk3188.dtsi | 264 pwm2 {
265 pwm2_out: pwm2-out {
492 &pwm2 {
|
| D | imx6q-tx6q-1020-comtft.dts | 26 pwms = <&pwm2 0 500000 0>;
|
| D | rk3066a.dtsi | 323 pwm2 {
324 pwm2_out: pwm2-out {
565 &pwm2 {
|
| D | imx6dl-tx6u-811x.dts | 28 pwms = <&pwm2 0 500000 0>;
|
| D | imx6q-tx6q-1110.dts | 28 pwms = <&pwm2 0 500000 0>;
|
| D | imx6dl-tx6u-801x.dts | 26 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
| D | imx6q-tx6q-1010.dts | 26 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
| D | imx6q-tx6q-1020.dts | 26 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
| D | imx53-tx53-x13x.dts | 28 pwms = <&pwm2 0 500000 0>;
|
| D | tegra30-apalis-eval.dts | 217 pwm2 {
|
| D | imx53-mba53.dts | 26 pwms = <&pwm2 0 50000>;
|
| D | imx6qdl-tx6.dtsi | 24 pwm1 = &pwm2;
633 &pwm2 {
|
| D | imx53-tx53-x03x.dts | 157 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
| D | atlas6.dtsi | 462 pwm2_pins_a: pwm2@0 {
465 sirf,function = "pwm2";
|
| D | prima2.dtsi | 476 pwm2_pins_a: pwm2@0 {
479 sirf,function = "pwm2";
|
| D | rk3188-radxarock.dts | 269 &pwm2 {
|
| D | imx6qdl-hummingboard.dtsi | 255 &pwm2 {
|
| D | rk3288.dtsi | 511 pwm2: pwm@ff680020 { label
1228 pwm2 {
1229 pwm2_pin: pwm2-pin {
|
| D | imx23.dtsi | 252 pwm2_pins_a: pwm2@0 {
|
| D | rk3xxx.dtsi | 270 pwm2: pwm@20050020 { label
|
| D | imx6dl-riotboard.dts | 238 &pwm2 {
|
| D | exynos3250-pinctrl.dtsi | 202 pwm2_out: pwm2-out {
|
| D | imx53-tx53.dtsi | 494 &pwm2 {
|
| D | imx50.dtsi | 298 pwm2: pwm@53fb8000 { label
|
| D | exynos4415-pinctrl.dtsi | 238 pwm2_out: pwm2-out {
|
| D | rk3066a-rayeager.dts | 427 &pwm2 {
|
| D | imx25.dtsi | 368 pwm2: pwm@53fa0000 { label
|
| D | exynos5420-pinctrl.dtsi | 648 pwm2_out: pwm2-out {
|
| D | tegra30-apalis.dtsi | 164 nvidia,function = "pwm2";
|
| D | imx51.dtsi | 386 pwm2: pwm@73fb8000 { label
|
| D | exynos5250-pinctrl.dtsi | 368 pwm2_out: pwm2-out {
|
| D | s5pv210-pinctrl.dtsi | 446 pwm2_out: pwm2-out {
|
| D | exynos4210-pinctrl.dtsi | 348 pwm2_out: pwm2-out {
|
| D | imx53.dtsi | 483 pwm2: pwm@53fb8000 { label
|
| D | imx6sl.dtsi | 314 pwm2: pwm@02084000 { label
|
| D | exynos4x12-pinctrl.dtsi | 331 pwm2_out: pwm2-out {
|
| D | imx28.dtsi | 644 pwm2_pins_a: pwm2@0 {
|
| D | tegra114-roth.dts | 698 nvidia,function = "pwm2";
|
| D | imx6qdl.dtsi | 365 pwm2: pwm@02084000 { label
|
| D | imx6sx.dtsi | 370 pwm2: pwm@02084000 { label
|
| D | tegra30-beaver.dts | 1184 nvidia,function = "pwm2";
|
| /linux-4.1.27/drivers/hwmon/ |
| D | smsc47m1.c | 711 int fan1, fan2, fan3, pwm1, pwm2, pwm3; in smsc47m1_probe() local
740 pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05) in smsc47m1_probe()
759 if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) { in smsc47m1_probe()
807 if (pwm2) { in smsc47m1_probe()
|
| D | nct7904.c | 455 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
|
| D | max6639.c | 364 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
|
| D | w83l786ng.c | 569 SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
|
| D | f75375s.c | 720 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
|
| D | adm1031.c | 521 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
|
| D | pc87427.c | 670 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
|
| D | asc7621.c | 956 PWRITE(pwm2, 1, PRI_HIGH, 0x31, 0, 0, 0, u8),
|
| D | adt7470.c | 1037 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
|
| D | w83791d.c | 756 SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO,
|
| D | adt7475.c | 1034 static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
|
| D | w83792d.c | 1076 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
|
| D | f71805f.c | 1092 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1);
|
| D | w83781d.c | 777 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
|
| D | adt7462.c | 1627 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
|
| D | w83627hf.c | 1097 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
|
| D | adm1026.c | 1362 static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
|
| D | pc87360.c | 389 SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1),
|
| D | it87.c | 1314 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
|
| D | f71882fg.c | 563 SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
|
| D | lm93.c | 1908 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
|
| D | w83627ehf.c | 1567 SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
|
| /linux-4.1.27/arch/cris/arch-v32/mach-a3/ |
| D | pinmux.c | 168 hwprot.pwm2 = regk_pinmux_yes; in crisv32_pinmux_alloc_fixed()
327 hwprot.pwm2 = regk_pinmux_no; in crisv32_pinmux_dealloc_fixed()
|
| /linux-4.1.27/Documentation/devicetree/bindings/pinctrl/ |
| D | brcm,cygnus-pinmux.txt | 57 "pwm2": "pwm2_grp"
|
| D | nvidia,tegra30-pinmux.txt | 100 nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
|
| D | pinctrl_spear.txt | 140 "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
|
| D | nvidia,tegra114-pinmux.txt | 89 pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
|
| D | nvidia,tegra124-pinmux.txt | 107 i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3,
|
| D | nvidia,tegra210-pinmux.txt | 139 pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
|
| /linux-4.1.27/arch/cris/include/arch-v32/mach-a3/mach/hwregs/ |
| D | pinmux_defs.h | 100 unsigned int pwm2 : 1; member
|
| /linux-4.1.27/drivers/pinctrl/bcm/ |
| D | pinctrl-cygnus-mux.c | 525 CYGNUS_PIN_GROUP(pwm2, 0xc, 8, 0),
662 CYGNUS_PIN_FUNCTION(pwm2),
|
| /linux-4.1.27/drivers/pinctrl/ |
| D | pinctrl-palmas.c | 444 OD_INFO(pwm2, PU_PD_OD, PALMAS_OD_OUTPUT_CTRL, 0x80, 0x80, 0x0);
478 PIN_INFO(pwm2, PWM, NULL, &od_pwm2_info);
|
| D | pinctrl-tegra210.c | 1240 FUNCTION(pwm2),
|
| D | pinctrl-tegra114.c | 1507 FUNCTION(pwm2),
|
| D | pinctrl-tegra124.c | 1670 FUNCTION(pwm2),
|
| D | pinctrl-tegra30.c | 2066 FUNCTION(pwm2),
|
| /linux-4.1.27/arch/arm64/boot/dts/exynos/ |
| D | exynos7-pinctrl.dtsi | 274 pwm2_out: pwm2-out {
|
| /linux-4.1.27/drivers/char/ |
| D | i8k.c | 668 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
|