| /linux-4.1.27/Documentation/w1/slaves/ |
| D | w1_therm | 14 w1_therm provides basic temperature conversion for ds18*20 devices.
22 read sequence will initiate a temperature conversion then provide two
30 temperature conversion at a time. If none of the devices are parasite
34 precision (which would also reduce the conversion time).
45 driven when the conversion is taking place, provided the master driver
|
| /linux-4.1.27/Documentation/hwmon/ |
| D | lm73 | 26 affects the conversion time of the LM73's analog-to-digital converter.
28 conversion time via the 'update_interval' sysfs attribute for the
42 used to change the conversion time:
71 conversion time actively in use.
73 Mathematically, the resolution can be derived from the conversion time
|
| D | max197 | 29 filled with a pointer to a conversion function, defined like:
33 ctrl is the control byte to write to start a new conversion.
43 3 BIP Unipolar or Bipolar conversion mode
49 * in[0-7]_input: The conversion value for the corresponding channel.
|
| D | ina2xx | 42 programmable conversion times and filtering.
61 bus and shunt voltage conversion times multiplied by the averaging rate. We
62 don't touch the conversion times and only modify the number of averages. The
|
| D | da9055 | 13 multiplexer. The analogue input multiplexer will allow conversion of up to 5
15 the input of the ADC during the conversion.
|
| D | da9052 | 13 multiplexer. The analogue input multiplexer will allow conversion of up to 10
15 the input of the ADC during the conversion.
|
| D | ds1621 | 143 used to change the conversion time:
177 after a write operation provides the conversion time used by the device.
179 Mathematically, the resolution can be derived from the conversion time
187 -> 93.75ms = minimum conversion time
|
| D | ina209 | 71 update_interval data conversion time; affects number of samples used
|
| D | via686a | 14 (Some conversion-factor data were contributed by
|
| D | sysfs-interface | 24 values conversion, labeling of inputs and hiding of unused inputs.
30 will have to implement conversion, labeling and hiding of inputs. For
414 mathematical functions not available in the kernel, so the conversion
|
| D | pc87360 | 13 Thanks to Rudolf Marek for helping me investigate conversion issues.
|
| D | asc7621 | 26 Our conversion process produces a result that is reported as two bytes.
|
| D | lm90 | 203 * Moving average (depending on conversion rate)
|
| D | pmbus-core | 12 conversion products. This flexible and highly versatile standard allows for
|
| D | w83781d | 112 The W83782D and W83783S temperature conversion machine understands about
|
| /linux-4.1.27/tools/perf/Documentation/ |
| D | perf-data.txt | 21 It's possible to set data-convert debug variable to get debug messages from conversion,
28 Triggers the CTF conversion, specify the path of CTF data directory.
|
| /linux-4.1.27/Documentation/devicetree/bindings/media/i2c/ |
| D | tvp514x.txt | 6 to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
7 conversion and decoding of NTSC, PAL and SECAM composite and S-video into
|
| /linux-4.1.27/Documentation/devicetree/bindings/media/ |
| D | exynos5-gsc.txt | 3 G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
|
| D | renesas,vsp1.txt | 4 blending, color space conversion and various other image processing features.
|
| /linux-4.1.27/Documentation/devicetree/bindings/staging/iio/adc/ |
| D | spear-adc.txt | 15 omitted, single data conversion will be used.
|
| /linux-4.1.27/Documentation/video4linux/ |
| D | soc-camera.txt | 80 supports non-standard pixel format conversion, it should implement a
82 details about format conversion. The rest of the methods are called from
146 Format conversion
160 host drivers can also provide their own conversion rules by implementing a
|
| D | fimc.txt | 25 - memory-to-memory processing (color space conversion, scaling, mirror
|
| D | uvcvideo.txt | 212 including little-endian/big-endian conversion. This is particularly
|
| D | vivid.txt | 582 map to valid colors in all colorspaces. The colorspace conversion
636 conversion). This behavior is also what you want, since a 75% Colorbar
904 have to do pixel format conversion as well, and that's taking things too far.
|
| /linux-4.1.27/Documentation/devicetree/bindings/hwmon/ |
| D | ntc_thermistor.txt | 26 conversion.
|
| /linux-4.1.27/Documentation/arm/Samsung-S3C24XX/ |
| D | GPIO.txt | 41 GPIOLIB conversion
100 With the conversion to gpiolib, there is no longer a direct conversion
|
| /linux-4.1.27/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,spmi-vadc.txt | 38 Definition: End of conversion interrupt.
79 conversion. Delay = 100us * (value) for value < 11, and
|
| D | qcom,spmi-iadc.txt | 24 Definition: End of ADC conversion.
|
| D | at91_adc.txt | 27 - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
|
| /linux-4.1.27/drivers/staging/iio/Documentation/ |
| D | sysfs-bus-iio-impedance-analyzer-ad5933 | 30 to perform a conversion sequence of the response signal.
|
| /linux-4.1.27/Documentation/devicetree/bindings/power/ |
| D | ltc2941.txt | 5 temperature monitoring, and uses a slightly different conversion
|
| /linux-4.1.27/Documentation/isdn/ |
| D | INTERFACE.fax | 17 conversion by itself.
18 In receive-mode the LL-driver takes care of the bit-order conversion
|
| /linux-4.1.27/sound/oss/ |
| D | swarm_cs4297a.c | 307 unsigned conversion:1; // conversion from 16 to 8 bit in progress member
869 if (s->conversion == 1) { in stop_adc()
870 s->conversion = 0; in stop_adc()
915 s->conversion = 1; in start_adc()
1721 if (s->conversion) { in cs4297a_read()
2208 if (s->conversion) { in cs4297a_ioctl()
2257 if (s->conversion) { in cs4297a_ioctl()
2266 if (s->conversion) in cs4297a_ioctl()
2307 if (s->conversion) in cs4297a_ioctl()
2489 s->conversion = 0; in cs4297a_locked_open()
[all …]
|
| /linux-4.1.27/Documentation/arm/nwfpe/ |
| D | NOTES | 17 then no conversion would occur. This has performance considerations. The
|
| /linux-4.1.27/Documentation/i2c/ |
| D | old-module-parameters | 11 With the conversion of the i2c subsystem to the standard device driver
|
| /linux-4.1.27/Documentation/ABI/testing/ |
| D | sysfs-class-backlight-driver-adp8870 | 36 Get conversion value of the light sensor.
|
| D | sysfs-bus-iio | 684 Specifies the conversion factor from the standard units
1167 Often these sensors are unit less and as such conversion
|
| /linux-4.1.27/Documentation/devicetree/bindings/video/ |
| D | adi,adv7511.txt | 5 compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
|
| /linux-4.1.27/Documentation/filesystems/ |
| D | jfs.txt | 9 ASCII. The default is to do no conversion. Use
|
| D | vfat.txt | 108 This option disables the conversion of timestamps
115 -- Set offset for conversion of timestamps from local time
|
| D | hpfs.txt | 11 Werner Almesberger, 1992, 1993, MSDos option parser & CR/LF conversion
24 CR/LF -> LF conversion, if auto, decision is made according to extension
|
| D | btrfs.txt | 268 * btrfs-convert: in-place conversion from ext2/3/4 filesystems
|
| D | ext2.txt | 352 the need for data conversion.
|
| /linux-4.1.27/kernel/time/ |
| D | timeconst.bc | 43 print "/* Time conversion constants for HZ == ", hz, " */\n"
|
| /linux-4.1.27/drivers/staging/iio/ |
| D | TODO | 32 unit conversion.
|
| /linux-4.1.27/Documentation/watchdog/ |
| D | convert_drivers_to_kernel_api.txt | 72 Example conversion:
181 by adding a module parameter. The conversion for this would be something like:
|
| /linux-4.1.27/Documentation/networking/ |
| D | gen_stats.txt | 86 conversion routine. It does a few clever things. It takes a time
|
| D | netlink_mmap.txt | 32 - conversion of the RX path to get messages from the ring instead of recvmsg()
33 - conversion of the TX path to construct messages into the ring
|
| D | filter.txt | 596 before a conversion to the new layout is being done behind the scenes!
841 eBPF is reusing most of the opcode encoding from classic to simplify conversion
896 BPF_END 0xd0 /* eBPF only: endianness conversion */
|
| D | timestamping.txt | 268 a HW PTP clock source, to allow time conversion in userspace and
|
| /linux-4.1.27/Documentation/misc-devices/ |
| D | apds990x.txt | 35 Platform data can provide tuned values to the conversion formulas if
|
| /linux-4.1.27/Documentation/timers/ |
| D | highres.txt | 122 the kernel binary size. The conversion of i386 removes about 100 lines of
127 The conversion of an architecture has no functional impact, but allows to
129 to the clock event device and timer interrupt code. After the conversion the
|
| D | hrtimers.txt | 163 The conversion of nanosleep and posix-timers enabled the unification of
|
| /linux-4.1.27/Documentation/ |
| D | sparse.txt | 19 but in this case we really _do_ want to force the conversion). And because
|
| D | printk-formats.txt | 97 few examples show how the conversion would be done (the result string
104 The conversion rules are applied according to an optional combination
|
| D | CodingStyle | 731 Casting the return value which is a void pointer is redundant. The conversion
|
| /linux-4.1.27/Documentation/driver-model/ |
| D | bus.txt | 66 lists as they please, but conversion to the bus-specific type may be
|
| D | devres.txt | 229 and 400 bytes on 32bit machine after naive conversion (we can
|
| /linux-4.1.27/Documentation/cpu-freq/ |
| D | core.txt | 104 a ready to use conversion routine to translate the OPP layer's internal
|
| /linux-4.1.27/fs/xfs/ |
| D | Kconfig | 35 for conversion.
|
| /linux-4.1.27/Documentation/arm/pxa/ |
| D | mfp.txt | 283 The conversion from a generic pin configuration to the actual register
286 mfp-pxa2xx.c for how the conversion is made.
|
| /linux-4.1.27/Documentation/sound/alsa/ |
| D | CMIPCI.txt | 186 On the model 033, AC3 is implemented by the software conversion in
187 the alsa-lib. If you need to bypass the software conversion of IEC958
|
| D | hdspm.txt | 104 conversion. A test-application shows the usage of the controller.
|
| D | OSS-Emulation.txt | 150 conversion and useful for MMAP-applications.
|
| D | SB-Live-mixer.txt | 24 but the conversion routines exist only for stereo (2-channel streams)
|
| D | ALSA-Configuration.txt | 453 soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only)
1974 can perform sample rate conversion with separate rates for
|
| /linux-4.1.27/arch/m68k/fpsp040/ |
| D | scale.S | 87 fmovel #rz_mode,%fpcr |force rz for src conversion
|
| D | x_snan.S | 6 | SNAN for float -> integer conversions (integer conversion of
|
| D | bindec.S | 55 | in the output before conversion to bcd. LAMBDA is the
331 | in the output before conversion to bcd. LAMBDA is the sign
|
| D | res_func.S | 13 | reportable exception in the conversion.
1554 fmovew %fp0,L_SCR1(%a6) |let the 040 perform conversion
|
| /linux-4.1.27/Documentation/block/ |
| D | biovecs.txt | 33 conversion just required changing the types of the arguments to
|
| D | biodoc.txt | 666 to modify the internals of request to scatterlist conversion down the line
|
| /linux-4.1.27/drivers/media/platform/ |
| D | Kconfig | 203 conversion.
|
| /linux-4.1.27/sound/core/ |
| D | Kconfig | 87 support conversion of channels, formats and rates. It will
|
| /linux-4.1.27/Documentation/filesystems/nfs/ |
| D | knfsd-stats.txt | 33 rate conversion.
|
| /linux-4.1.27/fs/ |
| D | Kconfig.binfmt | 113 The conversion to ELF started in 1995. This option is primarily
|
| /linux-4.1.27/crypto/ |
| D | drbg.c | 275 struct s *conversion = (struct s *) buf; in drbg_cpu_to_be32() local
277 conversion->conv = cpu_to_be32(val); in drbg_cpu_to_be32()
|
| /linux-4.1.27/fs/affs/ |
| D | Changes | 10 problem that I'm aware of (pointer/int conversion
|
| /linux-4.1.27/Documentation/virtual/kvm/ |
| D | msr.txt | 97 The conversion from tsc to nanoseconds involves an additional
|
| /linux-4.1.27/drivers/iio/adc/ |
| D | Kconfig | 310 driver supports both RT and SW conversion methods.
|
| /linux-4.1.27/Documentation/powerpc/ |
| D | hvcs.txt | 216 or perform terminal type control sequence conversion on the data being
438 for most terminal emulators to provide adequate character conversion from
|
| /linux-4.1.27/Documentation/filesystems/cifs/ |
| D | CHANGES | 45 to DFS target. Convert string conversion functions from Unicode to more
265 Handle conversion of long share names (especially Asian languages)
354 Fix filename conversion when mapchars mount option was specified and
916 Fix bigendian bug in order of time conversion. Merge 2.5 to 2.4 version. Formatting cleanup.
|
| /linux-4.1.27/Documentation/ioctl/ |
| D | botching-up-ioctls.txt | 44 conversion or worse, fiddle the raw __u64 through your code since that
|
| /linux-4.1.27/scripts/ |
| D | spelling.txt | 270 convertion||conversion
|
| /linux-4.1.27/fs/befs/ |
| D | ChangeLog | 280 * Removed byte-order conversion code.
|
| /linux-4.1.27/Documentation/m68k/ |
| D | kernel-options.txt | 67 Normally, this "conversion" is done by the device files in /dev, but
|
| /linux-4.1.27/drivers/hwmon/ |
| D | Kconfig | 871 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
|
| /linux-4.1.27/drivers/scsi/aic7xxx/ |
| D | aic79xx.reg | 3589 * 2's complement to bit value conversion. Write the 2's complement value
|
| /linux-4.1.27/arch/arm/crypto/ |
| D | aesbs-core.S_shipped | 38 @ results keep in mind key schedule conversion overhead (see
|
| /linux-4.1.27/Documentation/scsi/ |
| D | ChangeLog.lpfc | 1434 * Initial support code for discovery in tasklet conversion.
|