1#
2# ADC drivers
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Analog to digital converters"
7
8config AD_SIGMA_DELTA
9	tristate
10	select IIO_BUFFER
11	select IIO_TRIGGERED_BUFFER
12
13config AD7266
14	tristate "Analog Devices AD7265/AD7266 ADC driver"
15	depends on SPI_MASTER
16	select IIO_BUFFER
17	select IIO_TRIGGER
18	select IIO_TRIGGERED_BUFFER
19	help
20	  Say yes here to build support for Analog Devices AD7265 and AD7266
21	  ADCs.
22
23config AD7291
24	tristate "Analog Devices AD7291 ADC driver"
25	depends on I2C
26	help
27	  Say yes here to build support for Analog Devices AD7291
28	  8 Channel ADC with temperature sensor.
29
30	  To compile this driver as a module, choose M here: the
31	  module will be called ad7291.
32
33config AD7298
34	tristate "Analog Devices AD7298 ADC driver"
35	depends on SPI
36	select IIO_BUFFER
37	select IIO_TRIGGERED_BUFFER
38	help
39	  Say yes here to build support for Analog Devices AD7298
40	  8 Channel ADC with temperature sensor.
41
42	  To compile this driver as a module, choose M here: the
43	  module will be called ad7298.
44
45config AD7476
46	tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
47	depends on SPI
48	select IIO_BUFFER
49	select IIO_TRIGGERED_BUFFER
50	help
51	  Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
52	  AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
53	  AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
54
55	  If unsure, say N (but it's safe to say "Y").
56
57	  To compile this driver as a module, choose M here: the
58	  module will be called ad7476.
59
60config AD7791
61	tristate "Analog Devices AD7791 ADC driver"
62	depends on SPI
63	select AD_SIGMA_DELTA
64	help
65	  Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
66	  AD7790 and AD7791 SPI analog to digital converters (ADC). If unsure, say
67	  N (but it is safe to say "Y").
68
69	  To compile this driver as a module, choose M here: the module will be
70	  called ad7791.
71
72config AD7793
73	tristate "Analog Devices AD7793 and similar ADCs driver"
74	depends on SPI
75	select AD_SIGMA_DELTA
76	help
77	  Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
78	  AD7794 and AD7795 SPI analog to digital converters (ADC).
79	  If unsure, say N (but it's safe to say "Y").
80
81	  To compile this driver as a module, choose M here: the
82	  module will be called AD7793.
83
84config AD7887
85	tristate "Analog Devices AD7887 ADC driver"
86	depends on SPI
87	select IIO_BUFFER
88	select IIO_TRIGGERED_BUFFER
89	help
90	  Say yes here to build support for Analog Devices
91	  AD7887 SPI analog to digital converter (ADC).
92	  If unsure, say N (but it's safe to say "Y").
93
94	  To compile this driver as a module, choose M here: the
95	  module will be called ad7887.
96
97config AD7923
98	tristate "Analog Devices AD7923 and similar ADCs driver"
99	depends on SPI
100	select IIO_BUFFER
101	select IIO_TRIGGERED_BUFFER
102	help
103	  Say yes here to build support for Analog Devices
104	  AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
105
106	  To compile this driver as a module, choose M here: the
107	  module will be called ad7923.
108
109config AD799X
110	tristate "Analog Devices AD799x ADC driver"
111	depends on I2C
112	select IIO_BUFFER
113	select IIO_TRIGGERED_BUFFER
114	help
115	  Say yes here to build support for Analog Devices:
116	  ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
117	  i2c analog to digital converters (ADC). Provides direct access
118	  via sysfs.
119
120config AT91_ADC
121	tristate "Atmel AT91 ADC"
122	depends on ARCH_AT91
123	depends on INPUT
124	select IIO_BUFFER
125	select IIO_TRIGGERED_BUFFER
126	select SYSFS
127	help
128	  Say yes here to build support for Atmel AT91 ADC.
129
130config AXP288_ADC
131	tristate "X-Powers AXP288 ADC driver"
132	depends on MFD_AXP20X
133	help
134	  Say yes here to have support for X-Powers power management IC (PMIC) ADC
135	  device. Depending on platform configuration, this general purpose ADC can
136	  be used for sampling sensors such as thermal resistors.
137
138config DA9150_GPADC
139	tristate "Dialog DA9150 GPADC driver support"
140	depends on MFD_DA9150
141	help
142	  Say yes here to build support for Dialog DA9150 GPADC.
143
144	  This driver can also be built as a module. If chosen, the module name
145	  will be da9150-gpadc.
146
147config CC10001_ADC
148	tristate "Cosmic Circuits 10001 ADC driver"
149	depends on HAS_IOMEM && HAVE_CLK && REGULATOR
150	select IIO_BUFFER
151	select IIO_TRIGGERED_BUFFER
152	help
153	  Say yes here to build support for Cosmic Circuits 10001 ADC.
154
155	  This driver can also be built as a module. If so, the module will be
156	  called cc10001_adc.
157
158config EXYNOS_ADC
159	tristate "Exynos ADC driver support"
160	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
161	help
162	  Core support for the ADC block found in the Samsung EXYNOS series
163	  of SoCs for drivers such as the touchscreen and hwmon to use to share
164	  this resource.
165
166config LP8788_ADC
167	tristate "LP8788 ADC driver"
168	depends on MFD_LP8788
169	help
170	  Say yes here to build support for TI LP8788 ADC.
171
172config MAX1027
173	tristate "Maxim max1027 ADC driver"
174	depends on SPI
175	select IIO_BUFFER
176	select IIO_TRIGGERED_BUFFER
177	help
178	  Say yes here to build support for Maxim SPI ADC models
179	  max1027, max1029 and max1031.
180
181config MAX1363
182	tristate "Maxim max1363 ADC driver"
183	depends on I2C
184	select IIO_BUFFER
185	select IIO_TRIGGERED_BUFFER
186	help
187	  Say yes here to build support for many Maxim i2c analog to digital
188	  converters (ADC). (max1361, max1362, max1363, max1364, max1036,
189	  max1037, max1038, max1039, max1136, max1136, max1137, max1138,
190	  max1139, max1236, max1237, max11238, max1239, max11600, max11601,
191	  max11602, max11603, max11604, max11605, max11606, max11607,
192	  max11608, max11609, max11610, max11611, max11612, max11613,
193	  max11614, max11615, max11616, max11617, max11644, max11645,
194	  max11646, max11647) Provides direct access via sysfs and buffered
195	  data via the iio dev interface.
196
197config MCP320X
198	tristate "Microchip Technology MCP3x01/02/04/08"
199	depends on SPI
200	help
201	  Say yes here to build support for Microchip Technology's
202	  MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204 or
203	  MCP3208 analog to digital converter.
204
205	  This driver can also be built as a module. If so, the module will be
206	  called mcp320x.
207
208config MCP3422
209	tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
210	depends on I2C
211	help
212	  Say yes here to build support for Microchip Technology's
213	  MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
214	  analog to digital converters.
215
216	  This driver can also be built as a module. If so, the module will be
217	  called mcp3422.
218
219config MEN_Z188_ADC
220	tristate "MEN 16z188 ADC IP Core support"
221	depends on MCB
222	help
223	  Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
224	  carrier.
225
226	  This driver can also be built as a module. If so, the module will be
227	  called men_z188_adc.
228
229config NAU7802
230	tristate "Nuvoton NAU7802 ADC driver"
231	depends on I2C
232	help
233	  Say yes here to build support for Nuvoton NAU7802 ADC.
234
235	  To compile this driver as a module, choose M here: the
236	  module will be called nau7802.
237
238config QCOM_SPMI_IADC
239	tristate "Qualcomm SPMI PMIC current ADC"
240	depends on SPMI
241	select REGMAP_SPMI
242	help
243	  This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
244
245	  The driver supports single mode operation to read from one of two
246	  channels (external or internal). Hardware have additional
247	  channels internally used for gain and offset calibration.
248
249	  To compile this driver as a module, choose M here: the module will
250	  be called qcom-spmi-iadc.
251
252config QCOM_SPMI_VADC
253	tristate "Qualcomm SPMI PMIC voltage ADC"
254	depends on SPMI
255	select REGMAP_SPMI
256	help
257	  This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.
258
259	  The driver supports multiple channels read. The VADC is a 15-bit
260	  sigma-delta ADC. Some of the channels are internally used for
261	  calibration.
262
263	  To compile this driver as a module, choose M here: the module will
264	  be called qcom-spmi-vadc.
265
266config ROCKCHIP_SARADC
267	tristate "Rockchip SARADC driver"
268	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
269	help
270	  Say yes here to build support for the SARADC found in SoCs from
271	  Rockchip.
272
273	  To compile this driver as a module, choose M here: the
274	  module will be called rockchip_saradc.
275
276config TI_ADC081C
277	tristate "Texas Instruments ADC081C021/027"
278	depends on I2C
279	help
280	  If you say yes here you get support for Texas Instruments ADC081C021
281	  and ADC081C027 ADC chips.
282
283	  This driver can also be built as a module. If so, the module will be
284	  called ti-adc081c.
285
286config TI_ADC128S052
287	tristate "Texas Instruments ADC128S052"
288	depends on SPI
289	help
290	  If you say yes here you get support for Texas Instruments ADC128S052
291	  chip.
292
293	  This driver can also be built as a module. If so, the module will be
294	  called ti-adc128s052.
295
296config TI_AM335X_ADC
297	tristate "TI's AM335X ADC driver"
298	depends on MFD_TI_AM335X_TSCADC
299	select IIO_BUFFER
300	select IIO_KFIFO_BUF
301	help
302	  Say yes here to build support for Texas Instruments ADC
303	  driver which is also a MFD client.
304
305config TWL4030_MADC
306	tristate "TWL4030 MADC (Monitoring A/D Converter)"
307	depends on TWL4030_CORE
308	help
309	This driver provides support for Triton TWL4030-MADC. The
310	driver supports both RT and SW conversion methods.
311
312	This driver can also be built as a module. If so, the module will be
313	called twl4030-madc.
314
315config TWL6030_GPADC
316	tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
317	depends on TWL4030_CORE
318	default n
319	help
320	  Say yes here if you want support for the TWL6030/TWL6032 General
321	  Purpose A/D Converter. This will add support for battery type
322	  detection, battery voltage and temperature measurement, die
323	  temperature measurement, system supply voltage, audio accessory,
324	  USB ID detection.
325
326	  This driver can also be built as a module. If so, the module will be
327	  called twl6030-gpadc.
328
329config VF610_ADC
330	tristate "Freescale vf610 ADC driver"
331	depends on OF
332	help
333	  Say yes here to support for Vybrid board analog-to-digital converter.
334	  Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX.
335
336	  This driver can also be built as a module. If so, the module will be
337	  called vf610_adc.
338
339config VIPERBOARD_ADC
340	tristate "Viperboard ADC support"
341	depends on MFD_VIPERBOARD && USB
342	help
343	  Say yes here to access the ADC part of the Nano River
344	  Technologies Viperboard.
345
346config XILINX_XADC
347	tristate "Xilinx XADC driver"
348	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
349	depends on HAS_IOMEM
350	select IIO_BUFFER
351	select IIO_TRIGGERED_BUFFER
352	help
353	  Say yes here to have support for the Xilinx XADC. The driver does support
354	  both the ZYNQ interface to the XADC as well as the AXI-XADC interface.
355
356	  The driver can also be build as a module. If so, the module will be called
357	  xilinx-xadc.
358
359endmenu
360