1What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_start
2KernelVersion:	3.1.0
3Contact:	linux-iio@vger.kernel.org
4Description:
5		Frequency sweep start frequency in Hz.
6
7What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_increment
8KernelVersion:	3.1.0
9Contact:	linux-iio@vger.kernel.org
10Description:
11		Frequency increment in Hz (step size) between consecutive
12		frequency points along the sweep.
13
14What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_points
15KernelVersion:	3.1.0
16Contact:	linux-iio@vger.kernel.org
17Description:
18		Number of frequency points (steps) in the frequency sweep.
19		This value, in conjunction with the outY_freq_start and the
20		outY_freq_increment, determines the frequency sweep range
21		for the sweep operation.
22
23What:		/sys/bus/iio/devices/iio:deviceX/outY_settling_cycles
24KernelVersion:	3.1.0
25Contact:	linux-iio@vger.kernel.org
26Description:
27		Number of output excitation cycles (settling time cycles)
28		that are allowed to pass through the unknown impedance,
29		after each frequency increment, and before the ADC is triggered
30		to perform a conversion sequence of the response signal.
31