| /linux-4.1.27/drivers/staging/media/lirc/ |
| D | lirc_serial.c | 742 (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); in hardware_init_port()
864 soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI); in set_use_inc()
881 (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); in set_use_dec()
1021 (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); in lirc_serial_suspend()
1047 soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI); in lirc_serial_resume()
|
| D | lirc_sir.c | 576 (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); in init_hardware()
|
| /linux-4.1.27/drivers/tty/serial/ |
| D | m32r_sio_reg.h | 147 #define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ macro
|
| D | m32r_sio.c | 304 up->ier |= UART_IER_MSI; in m32r_sio_enable_ms()
649 up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; in m32r_sio_startup()
779 up->ier &= ~UART_IER_MSI; in m32r_sio_set_termios()
781 up->ier |= UART_IER_MSI; in m32r_sio_set_termios()
|
| D | pxa.c | 76 up->ier |= UART_IER_MSI; in serial_pxa_enable_ms()
526 up->ier &= ~UART_IER_MSI; in serial_pxa_set_termios()
528 up->ier |= UART_IER_MSI; in serial_pxa_set_termios()
|
| D | vr41xx_siu.c | 291 ier |= UART_IER_MSI; in siu_enable_ms()
578 ier &= ~UART_IER_MSI; in siu_set_termios()
580 ier |= UART_IER_MSI; in siu_set_termios()
|
| D | omap-serial.c | 304 up->ier |= UART_IER_MSI; in serial_omap_enable_ms()
494 if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && in check_modem_status()
956 up->ier &= ~UART_IER_MSI; in serial_omap_set_termios()
958 up->ier |= UART_IER_MSI; in serial_omap_set_termios()
|
| D | sunsu.c | 317 up->ier |= UART_IER_MSI; in sunsu_enable_ms()
876 up->ier &= ~UART_IER_MSI; in sunsu_change_speed()
878 up->ier |= UART_IER_MSI; in sunsu_change_speed()
|
| D | serial-tegra.c | 1072 tup->ier_shadow |= UART_IER_MSI; in tegra_uart_enable_ms()
|
| /linux-4.1.27/include/uapi/linux/ |
| D | serial_reg.h | 24 #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ macro
|
| /linux-4.1.27/drivers/tty/ |
| D | amiserial.c | 458 if(info->IER & UART_IER_MSI) in ser_vbl_int()
560 info->IER = UART_IER_MSI; in startup()
728 info->IER &= ~UART_IER_MSI; in change_speed()
730 info->IER |= UART_IER_MSI; in change_speed()
733 info->IER |= UART_IER_MSI; in change_speed()
740 info->IER |= UART_IER_MSI; in change_speed()
|
| D | mxser.c | 711 info->IER &= ~UART_IER_MSI; in mxser_change_speed()
715 info->IER |= UART_IER_MSI; in mxser_change_speed()
754 info->IER |= UART_IER_MSI; in mxser_change_speed()
926 info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; in mxser_activate()
|
| /linux-4.1.27/drivers/staging/speakup/ |
| D | serialio.c | 126 outb(UART_IER_MSI|UART_IER_RLSI|UART_IER_RDI, in start_serial_interrupt()
|
| /linux-4.1.27/drivers/isdn/hisax/ |
| D | elsa_ser.c | 130 cs->hw.elsa.IER &= ~UART_IER_MSI; in change_speed()
131 cs->hw.elsa.IER |= UART_IER_MSI; in change_speed()
181 cs->hw.elsa.IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; in mstartup()
|
| /linux-4.1.27/sound/drivers/ |
| D | serial-u16550.c | 445 | UART_IER_MSI /* Enable Modem status interrupt */ in snd_uart16550_do_open()
449 | UART_IER_MSI /* Enable Modem status interrupt */ in snd_uart16550_do_open()
|
| /linux-4.1.27/drivers/mmc/card/ |
| D | sdio_uart.c | 337 port->ier &= ~UART_IER_MSI; in sdio_uart_change_speed()
339 port->ier |= UART_IER_MSI; in sdio_uart_change_speed()
|
| /linux-4.1.27/drivers/staging/dgnc/ |
| D | dgnc_cls.c | 635 ier |= UART_IER_MSI; in cls_param()
637 ier &= ~UART_IER_MSI; in cls_param()
|
| D | dgnc_neo.c | 792 ier |= UART_IER_MSI; in neo_param()
794 ier &= ~UART_IER_MSI; in neo_param()
|
| /linux-4.1.27/drivers/usb/serial/ |
| D | f81232.c | 415 UART_IER_MSI); in f81232_port_enable()
|
| D | ark3116.c | 389 ark3116_write_reg(port->serial, UART_IER, UART_IER_MSI|UART_IER_RLSI); in ark3116_open()
|
| /linux-4.1.27/drivers/tty/serial/8250/ |
| D | 8250_omap.c | 381 up->ier &= ~UART_IER_MSI; in omap_8250_set_termios()
383 up->ier |= UART_IER_MSI; in omap_8250_set_termios()
|
| D | 8250_core.c | 1450 up->ier &= ~UART_IER_MSI; in serial8250_disable_ms()
1462 up->ier |= UART_IER_MSI; in serial8250_enable_ms()
1606 if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && in serial8250_modem_status()
2647 up->ier &= ~UART_IER_MSI; in serial8250_do_set_termios()
2650 up->ier |= UART_IER_MSI; in serial8250_do_set_termios()
|
| /linux-4.1.27/drivers/tty/serial/jsm/ |
| D | jsm_cls.c | 785 ier |= (UART_IER_THRI | UART_IER_MSI); in cls_param()
|
| D | jsm_neo.c | 1055 ier |= (UART_IER_THRI | UART_IER_MSI); in neo_param()
|