1/**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 ************************************************************************* 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29****************************************************************************/ 30 31 32static int write_control_reg(struct echoaudio *chip, u32 value, char force); 33static int set_input_clock(struct echoaudio *chip, u16 clock); 34static int set_professional_spdif(struct echoaudio *chip, char prof); 35static int set_digital_mode(struct echoaudio *chip, u8 mode); 36static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic); 37static int check_asic_status(struct echoaudio *chip); 38 39 40static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) 41{ 42 int err; 43 44 if (snd_BUG_ON((subdevice_id & 0xfff0) != GINA24)) 45 return -ENODEV; 46 47 if ((err = init_dsp_comm_page(chip))) { 48 dev_err(chip->card->dev, 49 "init_hw - could not initialize DSP comm page\n"); 50 return err; 51 } 52 53 chip->device_id = device_id; 54 chip->subdevice_id = subdevice_id; 55 chip->bad_board = true; 56 chip->input_clock_types = 57 ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF | 58 ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 | 59 ECHO_CLOCK_BIT_ADAT; 60 61 /* Gina24 comes in both '301 and '361 flavors */ 62 if (chip->device_id == DEVICE_ID_56361) { 63 chip->dsp_code_to_load = FW_GINA24_361_DSP; 64 chip->digital_modes = 65 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | 66 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | 67 ECHOCAPS_HAS_DIGITAL_MODE_ADAT; 68 } else { 69 chip->dsp_code_to_load = FW_GINA24_301_DSP; 70 chip->digital_modes = 71 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | 72 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | 73 ECHOCAPS_HAS_DIGITAL_MODE_ADAT | 74 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM; 75 } 76 77 if ((err = load_firmware(chip)) < 0) 78 return err; 79 chip->bad_board = false; 80 81 return err; 82} 83 84 85 86static int set_mixer_defaults(struct echoaudio *chip) 87{ 88 chip->digital_mode = DIGITAL_MODE_SPDIF_RCA; 89 chip->professional_spdif = false; 90 chip->digital_in_automute = true; 91 return init_line_levels(chip); 92} 93 94 95 96static u32 detect_input_clocks(const struct echoaudio *chip) 97{ 98 u32 clocks_from_dsp, clock_bits; 99 100 /* Map the DSP clock detect bits to the generic driver clock 101 detect bits */ 102 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 103 104 clock_bits = ECHO_CLOCK_BIT_INTERNAL; 105 106 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF) 107 clock_bits |= ECHO_CLOCK_BIT_SPDIF; 108 109 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT) 110 clock_bits |= ECHO_CLOCK_BIT_ADAT; 111 112 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ESYNC) 113 clock_bits |= ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96; 114 115 return clock_bits; 116} 117 118 119 120/* Gina24 has an ASIC on the PCI card which must be loaded for anything 121interesting to happen. */ 122static int load_asic(struct echoaudio *chip) 123{ 124 u32 control_reg; 125 int err; 126 short asic; 127 128 if (chip->asic_loaded) 129 return 1; 130 131 /* Give the DSP a few milliseconds to settle down */ 132 mdelay(10); 133 134 /* Pick the correct ASIC for '301 or '361 Gina24 */ 135 if (chip->device_id == DEVICE_ID_56361) 136 asic = FW_GINA24_361_ASIC; 137 else 138 asic = FW_GINA24_301_ASIC; 139 140 err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, asic); 141 if (err < 0) 142 return err; 143 144 chip->asic_code = asic; 145 146 /* Now give the new ASIC a little time to set up */ 147 mdelay(10); 148 /* See if it worked */ 149 err = check_asic_status(chip); 150 151 /* Set up the control register if the load succeeded - 152 48 kHz, internal clock, S/PDIF RCA mode */ 153 if (!err) { 154 control_reg = GML_CONVERTER_ENABLE | GML_48KHZ; 155 err = write_control_reg(chip, control_reg, true); 156 } 157 return err; 158} 159 160 161 162static int set_sample_rate(struct echoaudio *chip, u32 rate) 163{ 164 u32 control_reg, clock; 165 166 if (snd_BUG_ON(rate >= 50000 && 167 chip->digital_mode == DIGITAL_MODE_ADAT)) 168 return -EINVAL; 169 170 /* Only set the clock for internal mode. */ 171 if (chip->input_clock != ECHO_CLOCK_INTERNAL) { 172 dev_warn(chip->card->dev, 173 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n"); 174 /* Save the rate anyhow */ 175 chip->comm_page->sample_rate = cpu_to_le32(rate); 176 chip->sample_rate = rate; 177 return 0; 178 } 179 180 clock = 0; 181 182 control_reg = le32_to_cpu(chip->comm_page->control_register); 183 control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK; 184 185 switch (rate) { 186 case 96000: 187 clock = GML_96KHZ; 188 break; 189 case 88200: 190 clock = GML_88KHZ; 191 break; 192 case 48000: 193 clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1; 194 break; 195 case 44100: 196 clock = GML_44KHZ; 197 /* Professional mode ? */ 198 if (control_reg & GML_SPDIF_PRO_MODE) 199 clock |= GML_SPDIF_SAMPLE_RATE0; 200 break; 201 case 32000: 202 clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 | 203 GML_SPDIF_SAMPLE_RATE1; 204 break; 205 case 22050: 206 clock = GML_22KHZ; 207 break; 208 case 16000: 209 clock = GML_16KHZ; 210 break; 211 case 11025: 212 clock = GML_11KHZ; 213 break; 214 case 8000: 215 clock = GML_8KHZ; 216 break; 217 default: 218 dev_err(chip->card->dev, 219 "set_sample_rate: %d invalid!\n", rate); 220 return -EINVAL; 221 } 222 223 control_reg |= clock; 224 225 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */ 226 chip->sample_rate = rate; 227 dev_dbg(chip->card->dev, "set_sample_rate: %d clock %d\n", rate, clock); 228 229 return write_control_reg(chip, control_reg, false); 230} 231 232 233 234static int set_input_clock(struct echoaudio *chip, u16 clock) 235{ 236 u32 control_reg, clocks_from_dsp; 237 238 239 /* Mask off the clock select bits */ 240 control_reg = le32_to_cpu(chip->comm_page->control_register) & 241 GML_CLOCK_CLEAR_MASK; 242 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 243 244 switch (clock) { 245 case ECHO_CLOCK_INTERNAL: 246 chip->input_clock = ECHO_CLOCK_INTERNAL; 247 return set_sample_rate(chip, chip->sample_rate); 248 case ECHO_CLOCK_SPDIF: 249 if (chip->digital_mode == DIGITAL_MODE_ADAT) 250 return -EAGAIN; 251 control_reg |= GML_SPDIF_CLOCK; 252 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96) 253 control_reg |= GML_DOUBLE_SPEED_MODE; 254 else 255 control_reg &= ~GML_DOUBLE_SPEED_MODE; 256 break; 257 case ECHO_CLOCK_ADAT: 258 if (chip->digital_mode != DIGITAL_MODE_ADAT) 259 return -EAGAIN; 260 control_reg |= GML_ADAT_CLOCK; 261 control_reg &= ~GML_DOUBLE_SPEED_MODE; 262 break; 263 case ECHO_CLOCK_ESYNC: 264 control_reg |= GML_ESYNC_CLOCK; 265 control_reg &= ~GML_DOUBLE_SPEED_MODE; 266 break; 267 case ECHO_CLOCK_ESYNC96: 268 control_reg |= GML_ESYNC_CLOCK | GML_DOUBLE_SPEED_MODE; 269 break; 270 default: 271 dev_err(chip->card->dev, 272 "Input clock 0x%x not supported for Gina24\n", clock); 273 return -EINVAL; 274 } 275 276 chip->input_clock = clock; 277 return write_control_reg(chip, control_reg, true); 278} 279 280 281 282static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) 283{ 284 u32 control_reg; 285 int err, incompatible_clock; 286 287 /* Set clock to "internal" if it's not compatible with the new mode */ 288 incompatible_clock = false; 289 switch (mode) { 290 case DIGITAL_MODE_SPDIF_OPTICAL: 291 case DIGITAL_MODE_SPDIF_CDROM: 292 case DIGITAL_MODE_SPDIF_RCA: 293 if (chip->input_clock == ECHO_CLOCK_ADAT) 294 incompatible_clock = true; 295 break; 296 case DIGITAL_MODE_ADAT: 297 if (chip->input_clock == ECHO_CLOCK_SPDIF) 298 incompatible_clock = true; 299 break; 300 default: 301 dev_err(chip->card->dev, 302 "Digital mode not supported: %d\n", mode); 303 return -EINVAL; 304 } 305 306 spin_lock_irq(&chip->lock); 307 308 if (incompatible_clock) { /* Switch to 48KHz, internal */ 309 chip->sample_rate = 48000; 310 set_input_clock(chip, ECHO_CLOCK_INTERNAL); 311 } 312 313 /* Clear the current digital mode */ 314 control_reg = le32_to_cpu(chip->comm_page->control_register); 315 control_reg &= GML_DIGITAL_MODE_CLEAR_MASK; 316 317 /* Tweak the control reg */ 318 switch (mode) { 319 case DIGITAL_MODE_SPDIF_OPTICAL: 320 control_reg |= GML_SPDIF_OPTICAL_MODE; 321 break; 322 case DIGITAL_MODE_SPDIF_CDROM: 323 /* '361 Gina24 cards do not have the S/PDIF CD-ROM mode */ 324 if (chip->device_id == DEVICE_ID_56301) 325 control_reg |= GML_SPDIF_CDROM_MODE; 326 break; 327 case DIGITAL_MODE_SPDIF_RCA: 328 /* GML_SPDIF_OPTICAL_MODE bit cleared */ 329 break; 330 case DIGITAL_MODE_ADAT: 331 control_reg |= GML_ADAT_MODE; 332 control_reg &= ~GML_DOUBLE_SPEED_MODE; 333 break; 334 } 335 336 err = write_control_reg(chip, control_reg, true); 337 spin_unlock_irq(&chip->lock); 338 if (err < 0) 339 return err; 340 chip->digital_mode = mode; 341 342 dev_dbg(chip->card->dev, 343 "set_digital_mode to %d\n", chip->digital_mode); 344 return incompatible_clock; 345} 346