1/*
2 * Copyright 2012 by Oracle Inc
3 * Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
4 *
5 * This code borrows ideas from https://lkml.org/lkml/2011/11/30/249
6 * so many thanks go to Kevin Tian <kevin.tian@intel.com>
7 * and Yu Ke <ke.yu@intel.com>.
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms and conditions of the GNU General Public License,
11 * version 2, as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
16 * more details.
17 *
18 */
19
20#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22#include <linux/cpumask.h>
23#include <linux/cpufreq.h>
24#include <linux/freezer.h>
25#include <linux/kernel.h>
26#include <linux/kthread.h>
27#include <linux/init.h>
28#include <linux/module.h>
29#include <linux/types.h>
30#include <linux/acpi.h>
31#include <acpi/processor.h>
32#include <xen/xen.h>
33#include <xen/xen-ops.h>
34#include <xen/interface/platform.h>
35#include <asm/xen/hypercall.h>
36
37static int no_hypercall;
38MODULE_PARM_DESC(off, "Inhibit the hypercall.");
39module_param_named(off, no_hypercall, int, 0400);
40
41/*
42 * Note: Do not convert the acpi_id* below to cpumask_var_t or use cpumask_bit
43 * - as those shrink to nr_cpu_bits (which is dependent on possible_cpu), which
44 * can be less than what we want to put in. Instead use the 'nr_acpi_bits'
45 * which is dynamically computed based on the MADT or x2APIC table.
46 */
47static unsigned int nr_acpi_bits;
48/* Mutex to protect the acpi_ids_done - for CPU hotplug use. */
49static DEFINE_MUTEX(acpi_ids_mutex);
50/* Which ACPI ID we have processed from 'struct acpi_processor'. */
51static unsigned long *acpi_ids_done;
52/* Which ACPI ID exist in the SSDT/DSDT processor definitions. */
53static unsigned long *acpi_id_present;
54/* And if there is an _CST definition (or a PBLK) for the ACPI IDs */
55static unsigned long *acpi_id_cst_present;
56
57static int push_cxx_to_hypervisor(struct acpi_processor *_pr)
58{
59	struct xen_platform_op op = {
60		.cmd			= XENPF_set_processor_pminfo,
61		.interface_version	= XENPF_INTERFACE_VERSION,
62		.u.set_pminfo.id	= _pr->acpi_id,
63		.u.set_pminfo.type	= XEN_PM_CX,
64	};
65	struct xen_processor_cx *dst_cx, *dst_cx_states = NULL;
66	struct acpi_processor_cx *cx;
67	unsigned int i, ok;
68	int ret = 0;
69
70	dst_cx_states = kcalloc(_pr->power.count,
71				sizeof(struct xen_processor_cx), GFP_KERNEL);
72	if (!dst_cx_states)
73		return -ENOMEM;
74
75	for (ok = 0, i = 1; i <= _pr->power.count; i++) {
76		cx = &_pr->power.states[i];
77		if (!cx->valid)
78			continue;
79
80		dst_cx = &(dst_cx_states[ok++]);
81
82		dst_cx->reg.space_id = ACPI_ADR_SPACE_SYSTEM_IO;
83		if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
84			dst_cx->reg.bit_width = 8;
85			dst_cx->reg.bit_offset = 0;
86			dst_cx->reg.access_size = 1;
87		} else {
88			dst_cx->reg.space_id = ACPI_ADR_SPACE_FIXED_HARDWARE;
89			if (cx->entry_method == ACPI_CSTATE_FFH) {
90				/* NATIVE_CSTATE_BEYOND_HALT */
91				dst_cx->reg.bit_offset = 2;
92				dst_cx->reg.bit_width = 1; /* VENDOR_INTEL */
93			}
94			dst_cx->reg.access_size = 0;
95		}
96		dst_cx->reg.address = cx->address;
97
98		dst_cx->type = cx->type;
99		dst_cx->latency = cx->latency;
100
101		dst_cx->dpcnt = 0;
102		set_xen_guest_handle(dst_cx->dp, NULL);
103	}
104	if (!ok) {
105		pr_debug("No _Cx for ACPI CPU %u\n", _pr->acpi_id);
106		kfree(dst_cx_states);
107		return -EINVAL;
108	}
109	op.u.set_pminfo.power.count = ok;
110	op.u.set_pminfo.power.flags.bm_control = _pr->flags.bm_control;
111	op.u.set_pminfo.power.flags.bm_check = _pr->flags.bm_check;
112	op.u.set_pminfo.power.flags.has_cst = _pr->flags.has_cst;
113	op.u.set_pminfo.power.flags.power_setup_done =
114		_pr->flags.power_setup_done;
115
116	set_xen_guest_handle(op.u.set_pminfo.power.states, dst_cx_states);
117
118	if (!no_hypercall)
119		ret = HYPERVISOR_dom0_op(&op);
120
121	if (!ret) {
122		pr_debug("ACPI CPU%u - C-states uploaded.\n", _pr->acpi_id);
123		for (i = 1; i <= _pr->power.count; i++) {
124			cx = &_pr->power.states[i];
125			if (!cx->valid)
126				continue;
127			pr_debug("     C%d: %s %d uS\n",
128				 cx->type, cx->desc, (u32)cx->latency);
129		}
130	} else if ((ret != -EINVAL) && (ret != -ENOSYS))
131		/* EINVAL means the ACPI ID is incorrect - meaning the ACPI
132		 * table is referencing a non-existing CPU - which can happen
133		 * with broken ACPI tables. */
134		pr_err("(CX): Hypervisor error (%d) for ACPI CPU%u\n",
135		       ret, _pr->acpi_id);
136
137	kfree(dst_cx_states);
138
139	return ret;
140}
141static struct xen_processor_px *
142xen_copy_pss_data(struct acpi_processor *_pr,
143		  struct xen_processor_performance *dst_perf)
144{
145	struct xen_processor_px *dst_states = NULL;
146	unsigned int i;
147
148	BUILD_BUG_ON(sizeof(struct xen_processor_px) !=
149		     sizeof(struct acpi_processor_px));
150
151	dst_states = kcalloc(_pr->performance->state_count,
152			     sizeof(struct xen_processor_px), GFP_KERNEL);
153	if (!dst_states)
154		return ERR_PTR(-ENOMEM);
155
156	dst_perf->state_count = _pr->performance->state_count;
157	for (i = 0; i < _pr->performance->state_count; i++) {
158		/* Fortunatly for us, they are both the same size */
159		memcpy(&(dst_states[i]), &(_pr->performance->states[i]),
160		       sizeof(struct acpi_processor_px));
161	}
162	return dst_states;
163}
164static int xen_copy_psd_data(struct acpi_processor *_pr,
165			     struct xen_processor_performance *dst)
166{
167	struct acpi_psd_package *pdomain;
168
169	BUILD_BUG_ON(sizeof(struct xen_psd_package) !=
170		     sizeof(struct acpi_psd_package));
171
172	/* This information is enumerated only if acpi_processor_preregister_performance
173	 * has been called.
174	 */
175	dst->shared_type = _pr->performance->shared_type;
176
177	pdomain = &(_pr->performance->domain_info);
178
179	/* 'acpi_processor_preregister_performance' does not parse if the
180	 * num_processors <= 1, but Xen still requires it. Do it manually here.
181	 */
182	if (pdomain->num_processors <= 1) {
183		if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
184			dst->shared_type = CPUFREQ_SHARED_TYPE_ALL;
185		else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
186			dst->shared_type = CPUFREQ_SHARED_TYPE_HW;
187		else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
188			dst->shared_type = CPUFREQ_SHARED_TYPE_ANY;
189
190	}
191	memcpy(&(dst->domain_info), pdomain, sizeof(struct acpi_psd_package));
192	return 0;
193}
194static int xen_copy_pct_data(struct acpi_pct_register *pct,
195			     struct xen_pct_register *dst_pct)
196{
197	/* It would be nice if you could just do 'memcpy(pct, dst_pct') but
198	 * sadly the Xen structure did not have the proper padding so the
199	 * descriptor field takes two (dst_pct) bytes instead of one (pct).
200	 */
201	dst_pct->descriptor = pct->descriptor;
202	dst_pct->length = pct->length;
203	dst_pct->space_id = pct->space_id;
204	dst_pct->bit_width = pct->bit_width;
205	dst_pct->bit_offset = pct->bit_offset;
206	dst_pct->reserved = pct->reserved;
207	dst_pct->address = pct->address;
208	return 0;
209}
210static int push_pxx_to_hypervisor(struct acpi_processor *_pr)
211{
212	int ret = 0;
213	struct xen_platform_op op = {
214		.cmd			= XENPF_set_processor_pminfo,
215		.interface_version	= XENPF_INTERFACE_VERSION,
216		.u.set_pminfo.id	= _pr->acpi_id,
217		.u.set_pminfo.type	= XEN_PM_PX,
218	};
219	struct xen_processor_performance *dst_perf;
220	struct xen_processor_px *dst_states = NULL;
221
222	dst_perf = &op.u.set_pminfo.perf;
223
224	dst_perf->platform_limit = _pr->performance_platform_limit;
225	dst_perf->flags |= XEN_PX_PPC;
226	xen_copy_pct_data(&(_pr->performance->control_register),
227			  &dst_perf->control_register);
228	xen_copy_pct_data(&(_pr->performance->status_register),
229			  &dst_perf->status_register);
230	dst_perf->flags |= XEN_PX_PCT;
231	dst_states = xen_copy_pss_data(_pr, dst_perf);
232	if (!IS_ERR_OR_NULL(dst_states)) {
233		set_xen_guest_handle(dst_perf->states, dst_states);
234		dst_perf->flags |= XEN_PX_PSS;
235	}
236	if (!xen_copy_psd_data(_pr, dst_perf))
237		dst_perf->flags |= XEN_PX_PSD;
238
239	if (dst_perf->flags != (XEN_PX_PSD | XEN_PX_PSS | XEN_PX_PCT | XEN_PX_PPC)) {
240		pr_warn("ACPI CPU%u missing some P-state data (%x), skipping\n",
241			_pr->acpi_id, dst_perf->flags);
242		ret = -ENODEV;
243		goto err_free;
244	}
245
246	if (!no_hypercall)
247		ret = HYPERVISOR_dom0_op(&op);
248
249	if (!ret) {
250		struct acpi_processor_performance *perf;
251		unsigned int i;
252
253		perf = _pr->performance;
254		pr_debug("ACPI CPU%u - P-states uploaded.\n", _pr->acpi_id);
255		for (i = 0; i < perf->state_count; i++) {
256			pr_debug("     %cP%d: %d MHz, %d mW, %d uS\n",
257			(i == perf->state ? '*' : ' '), i,
258			(u32) perf->states[i].core_frequency,
259			(u32) perf->states[i].power,
260			(u32) perf->states[i].transition_latency);
261		}
262	} else if ((ret != -EINVAL) && (ret != -ENOSYS))
263		/* EINVAL means the ACPI ID is incorrect - meaning the ACPI
264		 * table is referencing a non-existing CPU - which can happen
265		 * with broken ACPI tables. */
266		pr_warn("(_PXX): Hypervisor error (%d) for ACPI CPU%u\n",
267			ret, _pr->acpi_id);
268err_free:
269	if (!IS_ERR_OR_NULL(dst_states))
270		kfree(dst_states);
271
272	return ret;
273}
274static int upload_pm_data(struct acpi_processor *_pr)
275{
276	int err = 0;
277
278	mutex_lock(&acpi_ids_mutex);
279	if (__test_and_set_bit(_pr->acpi_id, acpi_ids_done)) {
280		mutex_unlock(&acpi_ids_mutex);
281		return -EBUSY;
282	}
283	if (_pr->flags.power)
284		err = push_cxx_to_hypervisor(_pr);
285
286	if (_pr->performance && _pr->performance->states)
287		err |= push_pxx_to_hypervisor(_pr);
288
289	mutex_unlock(&acpi_ids_mutex);
290	return err;
291}
292static unsigned int __init get_max_acpi_id(void)
293{
294	struct xenpf_pcpuinfo *info;
295	struct xen_platform_op op = {
296		.cmd = XENPF_get_cpuinfo,
297		.interface_version = XENPF_INTERFACE_VERSION,
298	};
299	int ret = 0;
300	unsigned int i, last_cpu, max_acpi_id = 0;
301
302	info = &op.u.pcpu_info;
303	info->xen_cpuid = 0;
304
305	ret = HYPERVISOR_dom0_op(&op);
306	if (ret)
307		return NR_CPUS;
308
309	/* The max_present is the same irregardless of the xen_cpuid */
310	last_cpu = op.u.pcpu_info.max_present;
311	for (i = 0; i <= last_cpu; i++) {
312		info->xen_cpuid = i;
313		ret = HYPERVISOR_dom0_op(&op);
314		if (ret)
315			continue;
316		max_acpi_id = max(info->acpi_id, max_acpi_id);
317	}
318	max_acpi_id *= 2; /* Slack for CPU hotplug support. */
319	pr_debug("Max ACPI ID: %u\n", max_acpi_id);
320	return max_acpi_id;
321}
322/*
323 * The read_acpi_id and check_acpi_ids are there to support the Xen
324 * oddity of virtual CPUs != physical CPUs in the initial domain.
325 * The user can supply 'xen_max_vcpus=X' on the Xen hypervisor line
326 * which will band the amount of CPUs the initial domain can see.
327 * In general that is OK, except it plays havoc with any of the
328 * for_each_[present|online]_cpu macros which are banded to the virtual
329 * CPU amount.
330 */
331static acpi_status
332read_acpi_id(acpi_handle handle, u32 lvl, void *context, void **rv)
333{
334	u32 acpi_id;
335	acpi_status status;
336	acpi_object_type acpi_type;
337	unsigned long long tmp;
338	union acpi_object object = { 0 };
339	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
340	acpi_io_address pblk = 0;
341
342	status = acpi_get_type(handle, &acpi_type);
343	if (ACPI_FAILURE(status))
344		return AE_OK;
345
346	switch (acpi_type) {
347	case ACPI_TYPE_PROCESSOR:
348		status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
349		if (ACPI_FAILURE(status))
350			return AE_OK;
351		acpi_id = object.processor.proc_id;
352		pblk = object.processor.pblk_address;
353		break;
354	case ACPI_TYPE_DEVICE:
355		status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
356		if (ACPI_FAILURE(status))
357			return AE_OK;
358		acpi_id = tmp;
359		break;
360	default:
361		return AE_OK;
362	}
363	/* There are more ACPI Processor objects than in x2APIC or MADT.
364	 * This can happen with incorrect ACPI SSDT declerations. */
365	if (acpi_id > nr_acpi_bits) {
366		pr_debug("We only have %u, trying to set %u\n",
367			 nr_acpi_bits, acpi_id);
368		return AE_OK;
369	}
370	/* OK, There is a ACPI Processor object */
371	__set_bit(acpi_id, acpi_id_present);
372
373	pr_debug("ACPI CPU%u w/ PBLK:0x%lx\n", acpi_id, (unsigned long)pblk);
374
375	status = acpi_evaluate_object(handle, "_CST", NULL, &buffer);
376	if (ACPI_FAILURE(status)) {
377		if (!pblk)
378			return AE_OK;
379	}
380	/* .. and it has a C-state */
381	__set_bit(acpi_id, acpi_id_cst_present);
382
383	return AE_OK;
384}
385static int check_acpi_ids(struct acpi_processor *pr_backup)
386{
387
388	if (!pr_backup)
389		return -ENODEV;
390
391	if (acpi_id_present && acpi_id_cst_present)
392		/* OK, done this once .. skip to uploading */
393		goto upload;
394
395	/* All online CPUs have been processed at this stage. Now verify
396	 * whether in fact "online CPUs" == physical CPUs.
397	 */
398	acpi_id_present = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
399	if (!acpi_id_present)
400		return -ENOMEM;
401
402	acpi_id_cst_present = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
403	if (!acpi_id_cst_present) {
404		kfree(acpi_id_present);
405		return -ENOMEM;
406	}
407
408	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
409			    ACPI_UINT32_MAX,
410			    read_acpi_id, NULL, NULL, NULL);
411	acpi_get_devices("ACPI0007", read_acpi_id, NULL, NULL);
412
413upload:
414	if (!bitmap_equal(acpi_id_present, acpi_ids_done, nr_acpi_bits)) {
415		unsigned int i;
416		for_each_set_bit(i, acpi_id_present, nr_acpi_bits) {
417			pr_backup->acpi_id = i;
418			/* Mask out C-states if there are no _CST or PBLK */
419			pr_backup->flags.power = test_bit(i, acpi_id_cst_present);
420			(void)upload_pm_data(pr_backup);
421		}
422	}
423
424	return 0;
425}
426static int __init check_prereq(void)
427{
428	struct cpuinfo_x86 *c = &cpu_data(0);
429
430	if (!xen_initial_domain())
431		return -ENODEV;
432
433	if (!acpi_gbl_FADT.smi_command)
434		return -ENODEV;
435
436	if (c->x86_vendor == X86_VENDOR_INTEL) {
437		if (!cpu_has(c, X86_FEATURE_EST))
438			return -ENODEV;
439
440		return 0;
441	}
442	if (c->x86_vendor == X86_VENDOR_AMD) {
443		/* Copied from powernow-k8.h, can't include ../cpufreq/powernow
444		 * as we get compile warnings for the static functions.
445		 */
446#define CPUID_FREQ_VOLT_CAPABILITIES    0x80000007
447#define USE_HW_PSTATE                   0x00000080
448		u32 eax, ebx, ecx, edx;
449		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
450		if ((edx & USE_HW_PSTATE) != USE_HW_PSTATE)
451			return -ENODEV;
452		return 0;
453	}
454	return -ENODEV;
455}
456/* acpi_perf_data is a pointer to percpu data. */
457static struct acpi_processor_performance __percpu *acpi_perf_data;
458
459static void free_acpi_perf_data(void)
460{
461	unsigned int i;
462
463	/* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */
464	for_each_possible_cpu(i)
465		free_cpumask_var(per_cpu_ptr(acpi_perf_data, i)
466				 ->shared_cpu_map);
467	free_percpu(acpi_perf_data);
468}
469
470static int xen_upload_processor_pm_data(void)
471{
472	struct acpi_processor *pr_backup = NULL;
473	unsigned int i;
474	int rc = 0;
475
476	pr_info("Uploading Xen processor PM info\n");
477
478	for_each_possible_cpu(i) {
479		struct acpi_processor *_pr;
480		_pr = per_cpu(processors, i /* APIC ID */);
481		if (!_pr)
482			continue;
483
484		if (!pr_backup) {
485			pr_backup = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
486			if (pr_backup)
487				memcpy(pr_backup, _pr, sizeof(struct acpi_processor));
488		}
489		(void)upload_pm_data(_pr);
490	}
491
492	rc = check_acpi_ids(pr_backup);
493	kfree(pr_backup);
494
495	return rc;
496}
497
498static int xen_acpi_processor_resume(struct notifier_block *nb,
499				     unsigned long action, void *data)
500{
501	bitmap_zero(acpi_ids_done, nr_acpi_bits);
502	return xen_upload_processor_pm_data();
503}
504
505struct notifier_block xen_acpi_processor_resume_nb = {
506	.notifier_call = xen_acpi_processor_resume,
507};
508
509static int __init xen_acpi_processor_init(void)
510{
511	unsigned int i;
512	int rc = check_prereq();
513
514	if (rc)
515		return rc;
516
517	nr_acpi_bits = get_max_acpi_id() + 1;
518	acpi_ids_done = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
519	if (!acpi_ids_done)
520		return -ENOMEM;
521
522	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
523	if (!acpi_perf_data) {
524		pr_debug("Memory allocation error for acpi_perf_data\n");
525		kfree(acpi_ids_done);
526		return -ENOMEM;
527	}
528	for_each_possible_cpu(i) {
529		if (!zalloc_cpumask_var_node(
530			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
531			GFP_KERNEL, cpu_to_node(i))) {
532			rc = -ENOMEM;
533			goto err_out;
534		}
535	}
536
537	/* Do initialization in ACPI core. It is OK to fail here. */
538	(void)acpi_processor_preregister_performance(acpi_perf_data);
539
540	for_each_possible_cpu(i) {
541		struct acpi_processor *pr;
542		struct acpi_processor_performance *perf;
543
544		pr = per_cpu(processors, i);
545		perf = per_cpu_ptr(acpi_perf_data, i);
546		if (!pr)
547			continue;
548
549		pr->performance = perf;
550		rc = acpi_processor_get_performance_info(pr);
551		if (rc)
552			goto err_out;
553	}
554
555	rc = xen_upload_processor_pm_data();
556	if (rc)
557		goto err_unregister;
558
559	xen_resume_notifier_register(&xen_acpi_processor_resume_nb);
560
561	return 0;
562err_unregister:
563	for_each_possible_cpu(i)
564		acpi_processor_unregister_performance(i);
565
566err_out:
567	/* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
568	free_acpi_perf_data();
569	kfree(acpi_ids_done);
570	return rc;
571}
572static void __exit xen_acpi_processor_exit(void)
573{
574	int i;
575
576	xen_resume_notifier_unregister(&xen_acpi_processor_resume_nb);
577	kfree(acpi_ids_done);
578	kfree(acpi_id_present);
579	kfree(acpi_id_cst_present);
580	for_each_possible_cpu(i)
581		acpi_processor_unregister_performance(i);
582
583	free_acpi_perf_data();
584}
585
586MODULE_AUTHOR("Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>");
587MODULE_DESCRIPTION("Xen ACPI Processor P-states (and Cx) driver which uploads PM data to Xen hypervisor");
588MODULE_LICENSE("GPL");
589
590/* We want to be loaded before the CPU freq scaling drivers are loaded.
591 * They are loaded in late_initcall. */
592device_initcall(xen_acpi_processor_init);
593module_exit(xen_acpi_processor_exit);
594