1/* 2 * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver 3 * 4 * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is largely derived from the Belkin USB Serial Adapter Driver 12 * (see belkin_sa.[ch]). All of the information about the device was acquired 13 * by using SniffUSB on Windows98. For technical details see mct_u232.h. 14 * 15 * William G. Greathouse and Greg Kroah-Hartman provided great help on how to 16 * do the reverse engineering and how to write a USB serial device driver. 17 * 18 * TO BE DONE, TO BE CHECKED: 19 * DTR/RTS signal handling may be incomplete or incorrect. I have mainly 20 * implemented what I have seen with SniffUSB or found in belkin_sa.c. 21 * For further TODOs check also belkin_sa.c. 22 */ 23 24#include <linux/kernel.h> 25#include <linux/errno.h> 26#include <linux/slab.h> 27#include <linux/tty.h> 28#include <linux/tty_driver.h> 29#include <linux/tty_flip.h> 30#include <linux/module.h> 31#include <linux/spinlock.h> 32#include <linux/uaccess.h> 33#include <asm/unaligned.h> 34#include <linux/usb.h> 35#include <linux/usb/serial.h> 36#include <linux/serial.h> 37#include "mct_u232.h" 38 39#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" 40#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" 41 42/* 43 * Function prototypes 44 */ 45static int mct_u232_port_probe(struct usb_serial_port *port); 46static int mct_u232_port_remove(struct usb_serial_port *remove); 47static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); 48static void mct_u232_close(struct usb_serial_port *port); 49static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); 50static void mct_u232_read_int_callback(struct urb *urb); 51static void mct_u232_set_termios(struct tty_struct *tty, 52 struct usb_serial_port *port, struct ktermios *old); 53static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); 54static int mct_u232_tiocmget(struct tty_struct *tty); 55static int mct_u232_tiocmset(struct tty_struct *tty, 56 unsigned int set, unsigned int clear); 57static void mct_u232_throttle(struct tty_struct *tty); 58static void mct_u232_unthrottle(struct tty_struct *tty); 59 60 61/* 62 * All of the device info needed for the MCT USB-RS232 converter. 63 */ 64static const struct usb_device_id id_table[] = { 65 { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, 66 { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, 67 { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, 68 { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) }, 69 { } /* Terminating entry */ 70}; 71MODULE_DEVICE_TABLE(usb, id_table); 72 73static struct usb_serial_driver mct_u232_device = { 74 .driver = { 75 .owner = THIS_MODULE, 76 .name = "mct_u232", 77 }, 78 .description = "MCT U232", 79 .id_table = id_table, 80 .num_ports = 1, 81 .open = mct_u232_open, 82 .close = mct_u232_close, 83 .dtr_rts = mct_u232_dtr_rts, 84 .throttle = mct_u232_throttle, 85 .unthrottle = mct_u232_unthrottle, 86 .read_int_callback = mct_u232_read_int_callback, 87 .set_termios = mct_u232_set_termios, 88 .break_ctl = mct_u232_break_ctl, 89 .tiocmget = mct_u232_tiocmget, 90 .tiocmset = mct_u232_tiocmset, 91 .tiocmiwait = usb_serial_generic_tiocmiwait, 92 .port_probe = mct_u232_port_probe, 93 .port_remove = mct_u232_port_remove, 94 .get_icount = usb_serial_generic_get_icount, 95}; 96 97static struct usb_serial_driver * const serial_drivers[] = { 98 &mct_u232_device, NULL 99}; 100 101struct mct_u232_private { 102 struct urb *read_urb; 103 spinlock_t lock; 104 unsigned int control_state; /* Modem Line Setting (TIOCM) */ 105 unsigned char last_lcr; /* Line Control Register */ 106 unsigned char last_lsr; /* Line Status Register */ 107 unsigned char last_msr; /* Modem Status Register */ 108 unsigned int rx_flags; /* Throttling flags */ 109}; 110 111#define THROTTLED 0x01 112 113/* 114 * Handle vendor specific USB requests 115 */ 116 117#define WDR_TIMEOUT 5000 /* default urb timeout */ 118 119/* 120 * Later day 2.6.0-test kernels have new baud rates like B230400 which 121 * we do not know how to support. We ignore them for the moment. 122 */ 123static int mct_u232_calculate_baud_rate(struct usb_serial *serial, 124 speed_t value, speed_t *result) 125{ 126 *result = value; 127 128 if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID 129 || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { 130 switch (value) { 131 case 300: 132 return 0x01; 133 case 600: 134 return 0x02; /* this one not tested */ 135 case 1200: 136 return 0x03; 137 case 2400: 138 return 0x04; 139 case 4800: 140 return 0x06; 141 case 9600: 142 return 0x08; 143 case 19200: 144 return 0x09; 145 case 38400: 146 return 0x0a; 147 case 57600: 148 return 0x0b; 149 case 115200: 150 return 0x0c; 151 default: 152 *result = 9600; 153 return 0x08; 154 } 155 } else { 156 /* FIXME: Can we use any divider - should we do 157 divider = 115200/value; 158 real baud = 115200/divider */ 159 switch (value) { 160 case 300: break; 161 case 600: break; 162 case 1200: break; 163 case 2400: break; 164 case 4800: break; 165 case 9600: break; 166 case 19200: break; 167 case 38400: break; 168 case 57600: break; 169 case 115200: break; 170 default: 171 value = 9600; 172 *result = 9600; 173 } 174 return 115200/value; 175 } 176} 177 178static int mct_u232_set_baud_rate(struct tty_struct *tty, 179 struct usb_serial *serial, struct usb_serial_port *port, speed_t value) 180{ 181 unsigned int divisor; 182 int rc; 183 unsigned char *buf; 184 unsigned char cts_enable_byte = 0; 185 speed_t speed; 186 187 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); 188 if (buf == NULL) 189 return -ENOMEM; 190 191 divisor = mct_u232_calculate_baud_rate(serial, value, &speed); 192 put_unaligned_le32(cpu_to_le32(divisor), buf); 193 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 194 MCT_U232_SET_BAUD_RATE_REQUEST, 195 MCT_U232_SET_REQUEST_TYPE, 196 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE, 197 WDR_TIMEOUT); 198 if (rc < 0) /*FIXME: What value speed results */ 199 dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n", 200 value, rc); 201 else 202 tty_encode_baud_rate(tty, speed, speed); 203 dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor); 204 205 /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which 206 always sends two extra USB 'device request' messages after the 207 'baud rate change' message. The actual functionality of the 208 request codes in these messages is not fully understood but these 209 particular codes are never seen in any operation besides a baud 210 rate change. Both of these messages send a single byte of data. 211 In the first message, the value of this byte is always zero. 212 213 The second message has been determined experimentally to control 214 whether data will be transmitted to a device which is not asserting 215 the 'CTS' signal. If the second message's data byte is zero, data 216 will be transmitted even if 'CTS' is not asserted (i.e. no hardware 217 flow control). if the second message's data byte is nonzero (a 218 value of 1 is used by this driver), data will not be transmitted to 219 a device which is not asserting 'CTS'. 220 */ 221 222 buf[0] = 0; 223 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 224 MCT_U232_SET_UNKNOWN1_REQUEST, 225 MCT_U232_SET_REQUEST_TYPE, 226 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE, 227 WDR_TIMEOUT); 228 if (rc < 0) 229 dev_err(&port->dev, "Sending USB device request code %d " 230 "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST, 231 rc); 232 233 if (port && C_CRTSCTS(tty)) 234 cts_enable_byte = 1; 235 236 dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n", 237 cts_enable_byte); 238 buf[0] = cts_enable_byte; 239 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 240 MCT_U232_SET_CTS_REQUEST, 241 MCT_U232_SET_REQUEST_TYPE, 242 0, 0, buf, MCT_U232_SET_CTS_SIZE, 243 WDR_TIMEOUT); 244 if (rc < 0) 245 dev_err(&port->dev, "Sending USB device request code %d " 246 "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc); 247 248 kfree(buf); 249 return rc; 250} /* mct_u232_set_baud_rate */ 251 252static int mct_u232_set_line_ctrl(struct usb_serial_port *port, 253 unsigned char lcr) 254{ 255 int rc; 256 unsigned char *buf; 257 258 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); 259 if (buf == NULL) 260 return -ENOMEM; 261 262 buf[0] = lcr; 263 rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), 264 MCT_U232_SET_LINE_CTRL_REQUEST, 265 MCT_U232_SET_REQUEST_TYPE, 266 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE, 267 WDR_TIMEOUT); 268 if (rc < 0) 269 dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); 270 dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr); 271 kfree(buf); 272 return rc; 273} /* mct_u232_set_line_ctrl */ 274 275static int mct_u232_set_modem_ctrl(struct usb_serial_port *port, 276 unsigned int control_state) 277{ 278 int rc; 279 unsigned char mcr; 280 unsigned char *buf; 281 282 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); 283 if (buf == NULL) 284 return -ENOMEM; 285 286 mcr = MCT_U232_MCR_NONE; 287 if (control_state & TIOCM_DTR) 288 mcr |= MCT_U232_MCR_DTR; 289 if (control_state & TIOCM_RTS) 290 mcr |= MCT_U232_MCR_RTS; 291 292 buf[0] = mcr; 293 rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), 294 MCT_U232_SET_MODEM_CTRL_REQUEST, 295 MCT_U232_SET_REQUEST_TYPE, 296 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, 297 WDR_TIMEOUT); 298 kfree(buf); 299 300 dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr); 301 302 if (rc < 0) { 303 dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); 304 return rc; 305 } 306 return 0; 307} /* mct_u232_set_modem_ctrl */ 308 309static int mct_u232_get_modem_stat(struct usb_serial_port *port, 310 unsigned char *msr) 311{ 312 int rc; 313 unsigned char *buf; 314 315 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); 316 if (buf == NULL) { 317 *msr = 0; 318 return -ENOMEM; 319 } 320 rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), 321 MCT_U232_GET_MODEM_STAT_REQUEST, 322 MCT_U232_GET_REQUEST_TYPE, 323 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE, 324 WDR_TIMEOUT); 325 if (rc < 0) { 326 dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc); 327 *msr = 0; 328 } else { 329 *msr = buf[0]; 330 } 331 dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr); 332 kfree(buf); 333 return rc; 334} /* mct_u232_get_modem_stat */ 335 336static void mct_u232_msr_to_icount(struct async_icount *icount, 337 unsigned char msr) 338{ 339 /* Translate Control Line states */ 340 if (msr & MCT_U232_MSR_DDSR) 341 icount->dsr++; 342 if (msr & MCT_U232_MSR_DCTS) 343 icount->cts++; 344 if (msr & MCT_U232_MSR_DRI) 345 icount->rng++; 346 if (msr & MCT_U232_MSR_DCD) 347 icount->dcd++; 348} /* mct_u232_msr_to_icount */ 349 350static void mct_u232_msr_to_state(struct usb_serial_port *port, 351 unsigned int *control_state, unsigned char msr) 352{ 353 /* Translate Control Line states */ 354 if (msr & MCT_U232_MSR_DSR) 355 *control_state |= TIOCM_DSR; 356 else 357 *control_state &= ~TIOCM_DSR; 358 if (msr & MCT_U232_MSR_CTS) 359 *control_state |= TIOCM_CTS; 360 else 361 *control_state &= ~TIOCM_CTS; 362 if (msr & MCT_U232_MSR_RI) 363 *control_state |= TIOCM_RI; 364 else 365 *control_state &= ~TIOCM_RI; 366 if (msr & MCT_U232_MSR_CD) 367 *control_state |= TIOCM_CD; 368 else 369 *control_state &= ~TIOCM_CD; 370 dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state); 371} /* mct_u232_msr_to_state */ 372 373/* 374 * Driver's tty interface functions 375 */ 376 377static int mct_u232_port_probe(struct usb_serial_port *port) 378{ 379 struct usb_serial *serial = port->serial; 380 struct mct_u232_private *priv; 381 382 /* check first to simplify error handling */ 383 if (!serial->port[1] || !serial->port[1]->interrupt_in_urb) { 384 dev_err(&port->dev, "expected endpoint missing\n"); 385 return -ENODEV; 386 } 387 388 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 389 if (!priv) 390 return -ENOMEM; 391 392 /* Use second interrupt-in endpoint for reading. */ 393 priv->read_urb = serial->port[1]->interrupt_in_urb; 394 priv->read_urb->context = port; 395 396 spin_lock_init(&priv->lock); 397 398 usb_set_serial_port_data(port, priv); 399 400 return 0; 401} 402 403static int mct_u232_port_remove(struct usb_serial_port *port) 404{ 405 struct mct_u232_private *priv; 406 407 priv = usb_get_serial_port_data(port); 408 kfree(priv); 409 410 return 0; 411} 412 413static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) 414{ 415 struct usb_serial *serial = port->serial; 416 struct mct_u232_private *priv = usb_get_serial_port_data(port); 417 int retval = 0; 418 unsigned int control_state; 419 unsigned long flags; 420 unsigned char last_lcr; 421 unsigned char last_msr; 422 423 /* Compensate for a hardware bug: although the Sitecom U232-P25 424 * device reports a maximum output packet size of 32 bytes, 425 * it seems to be able to accept only 16 bytes (and that's what 426 * SniffUSB says too...) 427 */ 428 if (le16_to_cpu(serial->dev->descriptor.idProduct) 429 == MCT_U232_SITECOM_PID) 430 port->bulk_out_size = 16; 431 432 /* Do a defined restart: the normal serial device seems to 433 * always turn on DTR and RTS here, so do the same. I'm not 434 * sure if this is really necessary. But it should not harm 435 * either. 436 */ 437 spin_lock_irqsave(&priv->lock, flags); 438 if (tty && (tty->termios.c_cflag & CBAUD)) 439 priv->control_state = TIOCM_DTR | TIOCM_RTS; 440 else 441 priv->control_state = 0; 442 443 priv->last_lcr = (MCT_U232_DATA_BITS_8 | 444 MCT_U232_PARITY_NONE | 445 MCT_U232_STOP_BITS_1); 446 control_state = priv->control_state; 447 last_lcr = priv->last_lcr; 448 spin_unlock_irqrestore(&priv->lock, flags); 449 mct_u232_set_modem_ctrl(port, control_state); 450 mct_u232_set_line_ctrl(port, last_lcr); 451 452 /* Read modem status and update control state */ 453 mct_u232_get_modem_stat(port, &last_msr); 454 spin_lock_irqsave(&priv->lock, flags); 455 priv->last_msr = last_msr; 456 mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); 457 spin_unlock_irqrestore(&priv->lock, flags); 458 459 retval = usb_submit_urb(priv->read_urb, GFP_KERNEL); 460 if (retval) { 461 dev_err(&port->dev, 462 "usb_submit_urb(read) failed pipe 0x%x err %d\n", 463 port->read_urb->pipe, retval); 464 goto error; 465 } 466 467 retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 468 if (retval) { 469 usb_kill_urb(priv->read_urb); 470 dev_err(&port->dev, 471 "usb_submit_urb(read int) failed pipe 0x%x err %d", 472 port->interrupt_in_urb->pipe, retval); 473 goto error; 474 } 475 return 0; 476 477error: 478 return retval; 479} /* mct_u232_open */ 480 481static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) 482{ 483 unsigned int control_state; 484 struct mct_u232_private *priv = usb_get_serial_port_data(port); 485 486 spin_lock_irq(&priv->lock); 487 if (on) 488 priv->control_state |= TIOCM_DTR | TIOCM_RTS; 489 else 490 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); 491 control_state = priv->control_state; 492 spin_unlock_irq(&priv->lock); 493 494 mct_u232_set_modem_ctrl(port, control_state); 495} 496 497static void mct_u232_close(struct usb_serial_port *port) 498{ 499 struct mct_u232_private *priv = usb_get_serial_port_data(port); 500 501 usb_kill_urb(priv->read_urb); 502 usb_kill_urb(port->interrupt_in_urb); 503 504 usb_serial_generic_close(port); 505} /* mct_u232_close */ 506 507 508static void mct_u232_read_int_callback(struct urb *urb) 509{ 510 struct usb_serial_port *port = urb->context; 511 struct mct_u232_private *priv = usb_get_serial_port_data(port); 512 unsigned char *data = urb->transfer_buffer; 513 int retval; 514 int status = urb->status; 515 unsigned long flags; 516 517 switch (status) { 518 case 0: 519 /* success */ 520 break; 521 case -ECONNRESET: 522 case -ENOENT: 523 case -ESHUTDOWN: 524 /* this urb is terminated, clean up */ 525 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", 526 __func__, status); 527 return; 528 default: 529 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", 530 __func__, status); 531 goto exit; 532 } 533 534 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); 535 536 /* 537 * Work-a-round: handle the 'usual' bulk-in pipe here 538 */ 539 if (urb->transfer_buffer_length > 2) { 540 if (urb->actual_length) { 541 tty_insert_flip_string(&port->port, data, 542 urb->actual_length); 543 tty_flip_buffer_push(&port->port); 544 } 545 goto exit; 546 } 547 548 /* 549 * The interrupt-in pipe signals exceptional conditions (modem line 550 * signal changes and errors). data[0] holds MSR, data[1] holds LSR. 551 */ 552 spin_lock_irqsave(&priv->lock, flags); 553 priv->last_msr = data[MCT_U232_MSR_INDEX]; 554 555 /* Record Control Line states */ 556 mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); 557 558 mct_u232_msr_to_icount(&port->icount, priv->last_msr); 559 560#if 0 561 /* Not yet handled. See belkin_sa.c for further information */ 562 /* Now to report any errors */ 563 priv->last_lsr = data[MCT_U232_LSR_INDEX]; 564 /* 565 * fill in the flip buffer here, but I do not know the relation 566 * to the current/next receive buffer or characters. I need 567 * to look in to this before committing any code. 568 */ 569 if (priv->last_lsr & MCT_U232_LSR_ERR) { 570 tty = tty_port_tty_get(&port->port); 571 /* Overrun Error */ 572 if (priv->last_lsr & MCT_U232_LSR_OE) { 573 } 574 /* Parity Error */ 575 if (priv->last_lsr & MCT_U232_LSR_PE) { 576 } 577 /* Framing Error */ 578 if (priv->last_lsr & MCT_U232_LSR_FE) { 579 } 580 /* Break Indicator */ 581 if (priv->last_lsr & MCT_U232_LSR_BI) { 582 } 583 tty_kref_put(tty); 584 } 585#endif 586 wake_up_interruptible(&port->port.delta_msr_wait); 587 spin_unlock_irqrestore(&priv->lock, flags); 588exit: 589 retval = usb_submit_urb(urb, GFP_ATOMIC); 590 if (retval) 591 dev_err(&port->dev, 592 "%s - usb_submit_urb failed with result %d\n", 593 __func__, retval); 594} /* mct_u232_read_int_callback */ 595 596static void mct_u232_set_termios(struct tty_struct *tty, 597 struct usb_serial_port *port, 598 struct ktermios *old_termios) 599{ 600 struct usb_serial *serial = port->serial; 601 struct mct_u232_private *priv = usb_get_serial_port_data(port); 602 struct ktermios *termios = &tty->termios; 603 unsigned int cflag = termios->c_cflag; 604 unsigned int old_cflag = old_termios->c_cflag; 605 unsigned long flags; 606 unsigned int control_state; 607 unsigned char last_lcr; 608 609 /* get a local copy of the current port settings */ 610 spin_lock_irqsave(&priv->lock, flags); 611 control_state = priv->control_state; 612 spin_unlock_irqrestore(&priv->lock, flags); 613 last_lcr = 0; 614 615 /* 616 * Update baud rate. 617 * Do not attempt to cache old rates and skip settings, 618 * disconnects screw such tricks up completely. 619 * Premature optimization is the root of all evil. 620 */ 621 622 /* reassert DTR and RTS on transition from B0 */ 623 if ((old_cflag & CBAUD) == B0) { 624 dev_dbg(&port->dev, "%s: baud was B0\n", __func__); 625 control_state |= TIOCM_DTR | TIOCM_RTS; 626 mct_u232_set_modem_ctrl(port, control_state); 627 } 628 629 mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty)); 630 631 if ((cflag & CBAUD) == B0) { 632 dev_dbg(&port->dev, "%s: baud is B0\n", __func__); 633 /* Drop RTS and DTR */ 634 control_state &= ~(TIOCM_DTR | TIOCM_RTS); 635 mct_u232_set_modem_ctrl(port, control_state); 636 } 637 638 /* 639 * Update line control register (LCR) 640 */ 641 642 /* set the parity */ 643 if (cflag & PARENB) 644 last_lcr |= (cflag & PARODD) ? 645 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; 646 else 647 last_lcr |= MCT_U232_PARITY_NONE; 648 649 /* set the number of data bits */ 650 switch (cflag & CSIZE) { 651 case CS5: 652 last_lcr |= MCT_U232_DATA_BITS_5; break; 653 case CS6: 654 last_lcr |= MCT_U232_DATA_BITS_6; break; 655 case CS7: 656 last_lcr |= MCT_U232_DATA_BITS_7; break; 657 case CS8: 658 last_lcr |= MCT_U232_DATA_BITS_8; break; 659 default: 660 dev_err(&port->dev, 661 "CSIZE was not CS5-CS8, using default of 8\n"); 662 last_lcr |= MCT_U232_DATA_BITS_8; 663 break; 664 } 665 666 termios->c_cflag &= ~CMSPAR; 667 668 /* set the number of stop bits */ 669 last_lcr |= (cflag & CSTOPB) ? 670 MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; 671 672 mct_u232_set_line_ctrl(port, last_lcr); 673 674 /* save off the modified port settings */ 675 spin_lock_irqsave(&priv->lock, flags); 676 priv->control_state = control_state; 677 priv->last_lcr = last_lcr; 678 spin_unlock_irqrestore(&priv->lock, flags); 679} /* mct_u232_set_termios */ 680 681static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) 682{ 683 struct usb_serial_port *port = tty->driver_data; 684 struct mct_u232_private *priv = usb_get_serial_port_data(port); 685 unsigned char lcr; 686 unsigned long flags; 687 688 spin_lock_irqsave(&priv->lock, flags); 689 lcr = priv->last_lcr; 690 691 if (break_state) 692 lcr |= MCT_U232_SET_BREAK; 693 spin_unlock_irqrestore(&priv->lock, flags); 694 695 mct_u232_set_line_ctrl(port, lcr); 696} /* mct_u232_break_ctl */ 697 698 699static int mct_u232_tiocmget(struct tty_struct *tty) 700{ 701 struct usb_serial_port *port = tty->driver_data; 702 struct mct_u232_private *priv = usb_get_serial_port_data(port); 703 unsigned int control_state; 704 unsigned long flags; 705 706 spin_lock_irqsave(&priv->lock, flags); 707 control_state = priv->control_state; 708 spin_unlock_irqrestore(&priv->lock, flags); 709 710 return control_state; 711} 712 713static int mct_u232_tiocmset(struct tty_struct *tty, 714 unsigned int set, unsigned int clear) 715{ 716 struct usb_serial_port *port = tty->driver_data; 717 struct mct_u232_private *priv = usb_get_serial_port_data(port); 718 unsigned int control_state; 719 unsigned long flags; 720 721 spin_lock_irqsave(&priv->lock, flags); 722 control_state = priv->control_state; 723 724 if (set & TIOCM_RTS) 725 control_state |= TIOCM_RTS; 726 if (set & TIOCM_DTR) 727 control_state |= TIOCM_DTR; 728 if (clear & TIOCM_RTS) 729 control_state &= ~TIOCM_RTS; 730 if (clear & TIOCM_DTR) 731 control_state &= ~TIOCM_DTR; 732 733 priv->control_state = control_state; 734 spin_unlock_irqrestore(&priv->lock, flags); 735 return mct_u232_set_modem_ctrl(port, control_state); 736} 737 738static void mct_u232_throttle(struct tty_struct *tty) 739{ 740 struct usb_serial_port *port = tty->driver_data; 741 struct mct_u232_private *priv = usb_get_serial_port_data(port); 742 unsigned int control_state; 743 744 spin_lock_irq(&priv->lock); 745 priv->rx_flags |= THROTTLED; 746 if (C_CRTSCTS(tty)) { 747 priv->control_state &= ~TIOCM_RTS; 748 control_state = priv->control_state; 749 spin_unlock_irq(&priv->lock); 750 mct_u232_set_modem_ctrl(port, control_state); 751 } else { 752 spin_unlock_irq(&priv->lock); 753 } 754} 755 756static void mct_u232_unthrottle(struct tty_struct *tty) 757{ 758 struct usb_serial_port *port = tty->driver_data; 759 struct mct_u232_private *priv = usb_get_serial_port_data(port); 760 unsigned int control_state; 761 762 spin_lock_irq(&priv->lock); 763 if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) { 764 priv->rx_flags &= ~THROTTLED; 765 priv->control_state |= TIOCM_RTS; 766 control_state = priv->control_state; 767 spin_unlock_irq(&priv->lock); 768 mct_u232_set_modem_ctrl(port, control_state); 769 } else { 770 spin_unlock_irq(&priv->lock); 771 } 772} 773 774module_usb_serial_driver(serial_drivers, id_table); 775 776MODULE_AUTHOR(DRIVER_AUTHOR); 777MODULE_DESCRIPTION(DRIVER_DESC); 778MODULE_LICENSE("GPL"); 779