1/*
2 * NXP ISP1301 USB transceiver driver
3 *
4 * Copyright (C) 2012 Roland Stigge
5 *
6 * Author: Roland Stigge <stigge@antcom.de>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/module.h>
14#include <linux/mutex.h>
15#include <linux/i2c.h>
16#include <linux/usb/phy.h>
17#include <linux/usb/isp1301.h>
18
19#define DRV_NAME		"isp1301"
20
21struct isp1301 {
22	struct usb_phy		phy;
23	struct mutex		mutex;
24
25	struct i2c_client	*client;
26};
27
28#define phy_to_isp(p)		(container_of((p), struct isp1301, phy))
29
30static const struct i2c_device_id isp1301_id[] = {
31	{ "isp1301", 0 },
32	{ }
33};
34MODULE_DEVICE_TABLE(i2c, isp1301_id);
35
36static struct i2c_client *isp1301_i2c_client;
37
38static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
39{
40	return i2c_smbus_write_byte_data(isp->client, reg | clear, value);
41}
42
43static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value)
44{
45	return __isp1301_write(isp, reg, value, 0);
46}
47
48static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value)
49{
50	return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR);
51}
52
53static int isp1301_phy_init(struct usb_phy *phy)
54{
55	struct isp1301 *isp = phy_to_isp(phy);
56
57	/* Disable transparent UART mode first */
58	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN);
59	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG);
60	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
61	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0);
62	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN
63				| MC2_SPD_SUSP_CTRL));
64
65	isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0);
66	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
67	isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN
68				| OTG1_DP_PULLDOWN));
69	isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP
70				| OTG1_DP_PULLUP));
71
72	/* mask all interrupts */
73	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0);
74	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0);
75	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0);
76
77	return 0;
78}
79
80static int isp1301_phy_set_vbus(struct usb_phy *phy, int on)
81{
82	struct isp1301 *isp = phy_to_isp(phy);
83
84	if (on)
85		isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
86	else
87		isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
88
89	return 0;
90}
91
92static int isp1301_probe(struct i2c_client *client,
93			 const struct i2c_device_id *i2c_id)
94{
95	struct isp1301 *isp;
96	struct usb_phy *phy;
97
98	isp = devm_kzalloc(&client->dev, sizeof(*isp), GFP_KERNEL);
99	if (!isp)
100		return -ENOMEM;
101
102	isp->client = client;
103	mutex_init(&isp->mutex);
104
105	phy = &isp->phy;
106	phy->dev = &client->dev;
107	phy->label = DRV_NAME;
108	phy->init = isp1301_phy_init;
109	phy->set_vbus = isp1301_phy_set_vbus;
110	phy->type = USB_PHY_TYPE_USB2;
111
112	i2c_set_clientdata(client, isp);
113	usb_add_phy_dev(phy);
114
115	isp1301_i2c_client = client;
116
117	return 0;
118}
119
120static int isp1301_remove(struct i2c_client *client)
121{
122	struct isp1301 *isp = i2c_get_clientdata(client);
123
124	usb_remove_phy(&isp->phy);
125	isp1301_i2c_client = NULL;
126
127	return 0;
128}
129
130static struct i2c_driver isp1301_driver = {
131	.driver = {
132		.name = DRV_NAME,
133	},
134	.probe = isp1301_probe,
135	.remove = isp1301_remove,
136	.id_table = isp1301_id,
137};
138
139module_i2c_driver(isp1301_driver);
140
141static int match(struct device *dev, void *data)
142{
143	struct device_node *node = (struct device_node *)data;
144	return (dev->of_node == node) &&
145		(dev->driver == &isp1301_driver.driver);
146}
147
148struct i2c_client *isp1301_get_client(struct device_node *node)
149{
150	if (node) { /* reference of ISP1301 I2C node via DT */
151		struct device *dev = bus_find_device(&i2c_bus_type, NULL,
152						     node, match);
153		if (!dev)
154			return NULL;
155		return to_i2c_client(dev);
156	} else { /* non-DT: only one ISP1301 chip supported */
157		return isp1301_i2c_client;
158	}
159}
160EXPORT_SYMBOL_GPL(isp1301_get_client);
161
162MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
163MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
164MODULE_LICENSE("GPL");
165