1/* 2 * Copyright (C) 2007,2008 Freescale semiconductor, Inc. 3 * 4 * Author: Li Yang <LeoLi@freescale.com> 5 * Jerry Huang <Chang-Ming.Huang@freescale.com> 6 * 7 * Initialization based on code from Shlomi Gridish. 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, but 15 * WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 17 * General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License along 20 * with this program; if not, write to the Free Software Foundation, Inc., 21 * 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24#include <linux/module.h> 25#include <linux/kernel.h> 26#include <linux/delay.h> 27#include <linux/slab.h> 28#include <linux/proc_fs.h> 29#include <linux/errno.h> 30#include <linux/interrupt.h> 31#include <linux/io.h> 32#include <linux/timer.h> 33#include <linux/usb.h> 34#include <linux/device.h> 35#include <linux/usb/ch9.h> 36#include <linux/usb/gadget.h> 37#include <linux/workqueue.h> 38#include <linux/time.h> 39#include <linux/fsl_devices.h> 40#include <linux/platform_device.h> 41#include <linux/uaccess.h> 42 43#include <asm/unaligned.h> 44 45#include "phy-fsl-usb.h" 46 47#define DRIVER_VERSION "Rev. 1.55" 48#define DRIVER_AUTHOR "Jerry Huang/Li Yang" 49#define DRIVER_DESC "Freescale USB OTG Transceiver Driver" 50#define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION 51 52static const char driver_name[] = "fsl-usb2-otg"; 53 54const pm_message_t otg_suspend_state = { 55 .event = 1, 56}; 57 58#define HA_DATA_PULSE 59 60static struct usb_dr_mmap *usb_dr_regs; 61static struct fsl_otg *fsl_otg_dev; 62static int srp_wait_done; 63 64/* FSM timers */ 65struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr, 66 *b_ase0_brst_tmr, *b_se0_srp_tmr; 67 68/* Driver specific timers */ 69struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, 70 *b_srp_wait_tmr, *a_wait_enum_tmr; 71 72static struct list_head active_timers; 73 74static struct fsl_otg_config fsl_otg_initdata = { 75 .otg_port = 1, 76}; 77 78#ifdef CONFIG_PPC32 79static u32 _fsl_readl_be(const unsigned __iomem *p) 80{ 81 return in_be32(p); 82} 83 84static u32 _fsl_readl_le(const unsigned __iomem *p) 85{ 86 return in_le32(p); 87} 88 89static void _fsl_writel_be(u32 v, unsigned __iomem *p) 90{ 91 out_be32(p, v); 92} 93 94static void _fsl_writel_le(u32 v, unsigned __iomem *p) 95{ 96 out_le32(p, v); 97} 98 99static u32 (*_fsl_readl)(const unsigned __iomem *p); 100static void (*_fsl_writel)(u32 v, unsigned __iomem *p); 101 102#define fsl_readl(p) (*_fsl_readl)((p)) 103#define fsl_writel(v, p) (*_fsl_writel)((v), (p)) 104 105#else 106#define fsl_readl(addr) readl(addr) 107#define fsl_writel(val, addr) writel(val, addr) 108#endif /* CONFIG_PPC32 */ 109 110int write_ulpi(u8 addr, u8 data) 111{ 112 u32 temp; 113 114 temp = 0x60000000 | (addr << 16) | data; 115 fsl_writel(temp, &usb_dr_regs->ulpiview); 116 return 0; 117} 118 119/* -------------------------------------------------------------*/ 120/* Operations that will be called from OTG Finite State Machine */ 121 122/* Charge vbus for vbus pulsing in SRP */ 123void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on) 124{ 125 u32 tmp; 126 127 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 128 129 if (on) 130 /* stop discharging, start charging */ 131 tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) | 132 OTGSC_CTRL_VBUS_CHARGE; 133 else 134 /* stop charging */ 135 tmp &= ~OTGSC_CTRL_VBUS_CHARGE; 136 137 fsl_writel(tmp, &usb_dr_regs->otgsc); 138} 139 140/* Discharge vbus through a resistor to ground */ 141void fsl_otg_dischrg_vbus(int on) 142{ 143 u32 tmp; 144 145 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 146 147 if (on) 148 /* stop charging, start discharging */ 149 tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) | 150 OTGSC_CTRL_VBUS_DISCHARGE; 151 else 152 /* stop discharging */ 153 tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; 154 155 fsl_writel(tmp, &usb_dr_regs->otgsc); 156} 157 158/* A-device driver vbus, controlled through PP bit in PORTSC */ 159void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on) 160{ 161 u32 tmp; 162 163 if (on) { 164 tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS; 165 fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc); 166 } else { 167 tmp = fsl_readl(&usb_dr_regs->portsc) & 168 ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER; 169 fsl_writel(tmp, &usb_dr_regs->portsc); 170 } 171} 172 173/* 174 * Pull-up D+, signalling connect by periperal. Also used in 175 * data-line pulsing in SRP 176 */ 177void fsl_otg_loc_conn(struct otg_fsm *fsm, int on) 178{ 179 u32 tmp; 180 181 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 182 183 if (on) 184 tmp |= OTGSC_CTRL_DATA_PULSING; 185 else 186 tmp &= ~OTGSC_CTRL_DATA_PULSING; 187 188 fsl_writel(tmp, &usb_dr_regs->otgsc); 189} 190 191/* 192 * Generate SOF by host. This is controlled through suspend/resume the 193 * port. In host mode, controller will automatically send SOF. 194 * Suspend will block the data on the port. 195 */ 196void fsl_otg_loc_sof(struct otg_fsm *fsm, int on) 197{ 198 u32 tmp; 199 200 tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS; 201 if (on) 202 tmp |= PORTSC_PORT_FORCE_RESUME; 203 else 204 tmp |= PORTSC_PORT_SUSPEND; 205 206 fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc); 207 208} 209 210/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ 211void fsl_otg_start_pulse(struct otg_fsm *fsm) 212{ 213 u32 tmp; 214 215 srp_wait_done = 0; 216#ifdef HA_DATA_PULSE 217 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 218 tmp |= OTGSC_HA_DATA_PULSE; 219 fsl_writel(tmp, &usb_dr_regs->otgsc); 220#else 221 fsl_otg_loc_conn(1); 222#endif 223 224 fsl_otg_add_timer(fsm, b_data_pulse_tmr); 225} 226 227void b_data_pulse_end(unsigned long foo) 228{ 229#ifdef HA_DATA_PULSE 230#else 231 fsl_otg_loc_conn(0); 232#endif 233 234 /* Do VBUS pulse after data pulse */ 235 fsl_otg_pulse_vbus(); 236} 237 238void fsl_otg_pulse_vbus(void) 239{ 240 srp_wait_done = 0; 241 fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1); 242 /* start the timer to end vbus charge */ 243 fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr); 244} 245 246void b_vbus_pulse_end(unsigned long foo) 247{ 248 fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0); 249 250 /* 251 * As USB3300 using the same a_sess_vld and b_sess_vld voltage 252 * we need to discharge the bus for a while to distinguish 253 * residual voltage of vbus pulsing and A device pull up 254 */ 255 fsl_otg_dischrg_vbus(1); 256 fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr); 257} 258 259void b_srp_end(unsigned long foo) 260{ 261 fsl_otg_dischrg_vbus(0); 262 srp_wait_done = 1; 263 264 if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) && 265 fsl_otg_dev->fsm.b_sess_vld) 266 fsl_otg_dev->fsm.b_srp_done = 1; 267} 268 269/* 270 * Workaround for a_host suspending too fast. When a_bus_req=0, 271 * a_host will start by SRP. It needs to set b_hnp_enable before 272 * actually suspending to start HNP 273 */ 274void a_wait_enum(unsigned long foo) 275{ 276 VDBG("a_wait_enum timeout\n"); 277 if (!fsl_otg_dev->phy.otg->host->b_hnp_enable) 278 fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr); 279 else 280 otg_statemachine(&fsl_otg_dev->fsm); 281} 282 283/* The timeout callback function to set time out bit */ 284void set_tmout(unsigned long indicator) 285{ 286 *(int *)indicator = 1; 287} 288 289/* Initialize timers */ 290int fsl_otg_init_timers(struct otg_fsm *fsm) 291{ 292 /* FSM used timers */ 293 a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, 294 (unsigned long)&fsm->a_wait_vrise_tmout); 295 if (!a_wait_vrise_tmr) 296 return -ENOMEM; 297 298 a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, 299 (unsigned long)&fsm->a_wait_bcon_tmout); 300 if (!a_wait_bcon_tmr) 301 return -ENOMEM; 302 303 a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, 304 (unsigned long)&fsm->a_aidl_bdis_tmout); 305 if (!a_aidl_bdis_tmr) 306 return -ENOMEM; 307 308 b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, 309 (unsigned long)&fsm->b_ase0_brst_tmout); 310 if (!b_ase0_brst_tmr) 311 return -ENOMEM; 312 313 b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, 314 (unsigned long)&fsm->b_se0_srp); 315 if (!b_se0_srp_tmr) 316 return -ENOMEM; 317 318 b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL, 319 (unsigned long)&fsm->b_srp_done); 320 if (!b_srp_fail_tmr) 321 return -ENOMEM; 322 323 a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10, 324 (unsigned long)&fsm); 325 if (!a_wait_enum_tmr) 326 return -ENOMEM; 327 328 /* device driver used timers */ 329 b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0); 330 if (!b_srp_wait_tmr) 331 return -ENOMEM; 332 333 b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end, 334 TB_DATA_PLS, 0); 335 if (!b_data_pulse_tmr) 336 return -ENOMEM; 337 338 b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end, 339 TB_VBUS_PLS, 0); 340 if (!b_vbus_pulse_tmr) 341 return -ENOMEM; 342 343 return 0; 344} 345 346/* Uninitialize timers */ 347void fsl_otg_uninit_timers(void) 348{ 349 /* FSM used timers */ 350 kfree(a_wait_vrise_tmr); 351 kfree(a_wait_bcon_tmr); 352 kfree(a_aidl_bdis_tmr); 353 kfree(b_ase0_brst_tmr); 354 kfree(b_se0_srp_tmr); 355 kfree(b_srp_fail_tmr); 356 kfree(a_wait_enum_tmr); 357 358 /* device driver used timers */ 359 kfree(b_srp_wait_tmr); 360 kfree(b_data_pulse_tmr); 361 kfree(b_vbus_pulse_tmr); 362} 363 364static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t) 365{ 366 struct fsl_otg_timer *timer; 367 368 /* REVISIT: use array of pointers to timers instead */ 369 switch (t) { 370 case A_WAIT_VRISE: 371 timer = a_wait_vrise_tmr; 372 break; 373 case A_WAIT_BCON: 374 timer = a_wait_vrise_tmr; 375 break; 376 case A_AIDL_BDIS: 377 timer = a_wait_vrise_tmr; 378 break; 379 case B_ASE0_BRST: 380 timer = a_wait_vrise_tmr; 381 break; 382 case B_SE0_SRP: 383 timer = a_wait_vrise_tmr; 384 break; 385 case B_SRP_FAIL: 386 timer = a_wait_vrise_tmr; 387 break; 388 case A_WAIT_ENUM: 389 timer = a_wait_vrise_tmr; 390 break; 391 default: 392 timer = NULL; 393 } 394 395 return timer; 396} 397 398/* Add timer to timer list */ 399void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer) 400{ 401 struct fsl_otg_timer *timer = gtimer; 402 struct fsl_otg_timer *tmp_timer; 403 404 /* 405 * Check if the timer is already in the active list, 406 * if so update timer count 407 */ 408 list_for_each_entry(tmp_timer, &active_timers, list) 409 if (tmp_timer == timer) { 410 timer->count = timer->expires; 411 return; 412 } 413 timer->count = timer->expires; 414 list_add_tail(&timer->list, &active_timers); 415} 416 417static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) 418{ 419 struct fsl_otg_timer *timer; 420 421 timer = fsl_otg_get_timer(t); 422 if (!timer) 423 return; 424 425 fsl_otg_add_timer(fsm, timer); 426} 427 428/* Remove timer from the timer list; clear timeout status */ 429void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer) 430{ 431 struct fsl_otg_timer *timer = gtimer; 432 struct fsl_otg_timer *tmp_timer, *del_tmp; 433 434 list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) 435 if (tmp_timer == timer) 436 list_del(&timer->list); 437} 438 439static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) 440{ 441 struct fsl_otg_timer *timer; 442 443 timer = fsl_otg_get_timer(t); 444 if (!timer) 445 return; 446 447 fsl_otg_del_timer(fsm, timer); 448} 449 450/* Reset controller, not reset the bus */ 451void otg_reset_controller(void) 452{ 453 u32 command; 454 455 command = fsl_readl(&usb_dr_regs->usbcmd); 456 command |= (1 << 1); 457 fsl_writel(command, &usb_dr_regs->usbcmd); 458 while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1)) 459 ; 460} 461 462/* Call suspend/resume routines in host driver */ 463int fsl_otg_start_host(struct otg_fsm *fsm, int on) 464{ 465 struct usb_otg *otg = fsm->otg; 466 struct device *dev; 467 struct fsl_otg *otg_dev = 468 container_of(otg->usb_phy, struct fsl_otg, phy); 469 u32 retval = 0; 470 471 if (!otg->host) 472 return -ENODEV; 473 dev = otg->host->controller; 474 475 /* 476 * Update a_vbus_vld state as a_vbus_vld int is disabled 477 * in device mode 478 */ 479 fsm->a_vbus_vld = 480 !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID); 481 if (on) { 482 /* start fsl usb host controller */ 483 if (otg_dev->host_working) 484 goto end; 485 else { 486 otg_reset_controller(); 487 VDBG("host on......\n"); 488 if (dev->driver->pm && dev->driver->pm->resume) { 489 retval = dev->driver->pm->resume(dev); 490 if (fsm->id) { 491 /* default-b */ 492 fsl_otg_drv_vbus(fsm, 1); 493 /* 494 * Workaround: b_host can't driver 495 * vbus, but PP in PORTSC needs to 496 * be 1 for host to work. 497 * So we set drv_vbus bit in 498 * transceiver to 0 thru ULPI. 499 */ 500 write_ulpi(0x0c, 0x20); 501 } 502 } 503 504 otg_dev->host_working = 1; 505 } 506 } else { 507 /* stop fsl usb host controller */ 508 if (!otg_dev->host_working) 509 goto end; 510 else { 511 VDBG("host off......\n"); 512 if (dev && dev->driver) { 513 if (dev->driver->pm && dev->driver->pm->suspend) 514 retval = dev->driver->pm->suspend(dev); 515 if (fsm->id) 516 /* default-b */ 517 fsl_otg_drv_vbus(fsm, 0); 518 } 519 otg_dev->host_working = 0; 520 } 521 } 522end: 523 return retval; 524} 525 526/* 527 * Call suspend and resume function in udc driver 528 * to stop and start udc driver. 529 */ 530int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) 531{ 532 struct usb_otg *otg = fsm->otg; 533 struct device *dev; 534 535 if (!otg->gadget || !otg->gadget->dev.parent) 536 return -ENODEV; 537 538 VDBG("gadget %s\n", on ? "on" : "off"); 539 dev = otg->gadget->dev.parent; 540 541 if (on) { 542 if (dev->driver->resume) 543 dev->driver->resume(dev); 544 } else { 545 if (dev->driver->suspend) 546 dev->driver->suspend(dev, otg_suspend_state); 547 } 548 549 return 0; 550} 551 552/* 553 * Called by initialization code of host driver. Register host controller 554 * to the OTG. Suspend host for OTG role detection. 555 */ 556static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) 557{ 558 struct fsl_otg *otg_dev; 559 560 if (!otg) 561 return -ENODEV; 562 563 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 564 if (otg_dev != fsl_otg_dev) 565 return -ENODEV; 566 567 otg->host = host; 568 569 otg_dev->fsm.a_bus_drop = 0; 570 otg_dev->fsm.a_bus_req = 1; 571 572 if (host) { 573 VDBG("host off......\n"); 574 575 otg->host->otg_port = fsl_otg_initdata.otg_port; 576 otg->host->is_b_host = otg_dev->fsm.id; 577 /* 578 * must leave time for hub_wq to finish its thing 579 * before yanking the host driver out from under it, 580 * so suspend the host after a short delay. 581 */ 582 otg_dev->host_working = 1; 583 schedule_delayed_work(&otg_dev->otg_event, 100); 584 return 0; 585 } else { 586 /* host driver going away */ 587 if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) & 588 OTGSC_STS_USB_ID)) { 589 /* Mini-A cable connected */ 590 struct otg_fsm *fsm = &otg_dev->fsm; 591 592 otg->state = OTG_STATE_UNDEFINED; 593 fsm->protocol = PROTO_UNDEF; 594 } 595 } 596 597 otg_dev->host_working = 0; 598 599 otg_statemachine(&otg_dev->fsm); 600 601 return 0; 602} 603 604/* Called by initialization code of udc. Register udc to OTG. */ 605static int fsl_otg_set_peripheral(struct usb_otg *otg, 606 struct usb_gadget *gadget) 607{ 608 struct fsl_otg *otg_dev; 609 610 if (!otg) 611 return -ENODEV; 612 613 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 614 VDBG("otg_dev 0x%x\n", (int)otg_dev); 615 VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); 616 if (otg_dev != fsl_otg_dev) 617 return -ENODEV; 618 619 if (!gadget) { 620 if (!otg->default_a) 621 otg->gadget->ops->vbus_draw(otg->gadget, 0); 622 usb_gadget_vbus_disconnect(otg->gadget); 623 otg->gadget = 0; 624 otg_dev->fsm.b_bus_req = 0; 625 otg_statemachine(&otg_dev->fsm); 626 return 0; 627 } 628 629 otg->gadget = gadget; 630 otg->gadget->is_a_peripheral = !otg_dev->fsm.id; 631 632 otg_dev->fsm.b_bus_req = 1; 633 634 /* start the gadget right away if the ID pin says Mini-B */ 635 pr_debug("ID pin=%d\n", otg_dev->fsm.id); 636 if (otg_dev->fsm.id == 1) { 637 fsl_otg_start_host(&otg_dev->fsm, 0); 638 otg_drv_vbus(&otg_dev->fsm, 0); 639 fsl_otg_start_gadget(&otg_dev->fsm, 1); 640 } 641 642 return 0; 643} 644 645/* Set OTG port power, only for B-device */ 646static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA) 647{ 648 if (!fsl_otg_dev) 649 return -ENODEV; 650 if (phy->otg->state == OTG_STATE_B_PERIPHERAL) 651 pr_info("FSL OTG: Draw %d mA\n", mA); 652 653 return 0; 654} 655 656/* 657 * Delayed pin detect interrupt processing. 658 * 659 * When the Mini-A cable is disconnected from the board, 660 * the pin-detect interrupt happens before the disconnect 661 * interrupts for the connected device(s). In order to 662 * process the disconnect interrupt(s) prior to switching 663 * roles, the pin-detect interrupts are delayed, and handled 664 * by this routine. 665 */ 666static void fsl_otg_event(struct work_struct *work) 667{ 668 struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work); 669 struct otg_fsm *fsm = &og->fsm; 670 671 if (fsm->id) { /* switch to gadget */ 672 fsl_otg_start_host(fsm, 0); 673 otg_drv_vbus(fsm, 0); 674 fsl_otg_start_gadget(fsm, 1); 675 } 676} 677 678/* B-device start SRP */ 679static int fsl_otg_start_srp(struct usb_otg *otg) 680{ 681 struct fsl_otg *otg_dev; 682 683 if (!otg || otg->state != OTG_STATE_B_IDLE) 684 return -ENODEV; 685 686 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 687 if (otg_dev != fsl_otg_dev) 688 return -ENODEV; 689 690 otg_dev->fsm.b_bus_req = 1; 691 otg_statemachine(&otg_dev->fsm); 692 693 return 0; 694} 695 696/* A_host suspend will call this function to start hnp */ 697static int fsl_otg_start_hnp(struct usb_otg *otg) 698{ 699 struct fsl_otg *otg_dev; 700 701 if (!otg) 702 return -ENODEV; 703 704 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 705 if (otg_dev != fsl_otg_dev) 706 return -ENODEV; 707 708 pr_debug("start_hnp...\n"); 709 710 /* clear a_bus_req to enter a_suspend state */ 711 otg_dev->fsm.a_bus_req = 0; 712 otg_statemachine(&otg_dev->fsm); 713 714 return 0; 715} 716 717/* 718 * Interrupt handler. OTG/host/peripheral share the same int line. 719 * OTG driver clears OTGSC interrupts and leaves USB interrupts 720 * intact. It needs to have knowledge of some USB interrupts 721 * such as port change. 722 */ 723irqreturn_t fsl_otg_isr(int irq, void *dev_id) 724{ 725 struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm; 726 struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg; 727 u32 otg_int_src, otg_sc; 728 729 otg_sc = fsl_readl(&usb_dr_regs->otgsc); 730 otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8); 731 732 /* Only clear otg interrupts */ 733 fsl_writel(otg_sc, &usb_dr_regs->otgsc); 734 735 /*FIXME: ID change not generate when init to 0 */ 736 fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; 737 otg->default_a = (fsm->id == 0); 738 739 /* process OTG interrupts */ 740 if (otg_int_src) { 741 if (otg_int_src & OTGSC_INTSTS_USB_ID) { 742 fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; 743 otg->default_a = (fsm->id == 0); 744 /* clear conn information */ 745 if (fsm->id) 746 fsm->b_conn = 0; 747 else 748 fsm->a_conn = 0; 749 750 if (otg->host) 751 otg->host->is_b_host = fsm->id; 752 if (otg->gadget) 753 otg->gadget->is_a_peripheral = !fsm->id; 754 VDBG("ID int (ID is %d)\n", fsm->id); 755 756 if (fsm->id) { /* switch to gadget */ 757 schedule_delayed_work( 758 &((struct fsl_otg *)dev_id)->otg_event, 759 100); 760 } else { /* switch to host */ 761 cancel_delayed_work(& 762 ((struct fsl_otg *)dev_id)-> 763 otg_event); 764 fsl_otg_start_gadget(fsm, 0); 765 otg_drv_vbus(fsm, 1); 766 fsl_otg_start_host(fsm, 1); 767 } 768 return IRQ_HANDLED; 769 } 770 } 771 return IRQ_NONE; 772} 773 774static struct otg_fsm_ops fsl_otg_ops = { 775 .chrg_vbus = fsl_otg_chrg_vbus, 776 .drv_vbus = fsl_otg_drv_vbus, 777 .loc_conn = fsl_otg_loc_conn, 778 .loc_sof = fsl_otg_loc_sof, 779 .start_pulse = fsl_otg_start_pulse, 780 781 .add_timer = fsl_otg_fsm_add_timer, 782 .del_timer = fsl_otg_fsm_del_timer, 783 784 .start_host = fsl_otg_start_host, 785 .start_gadget = fsl_otg_start_gadget, 786}; 787 788/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */ 789static int fsl_otg_conf(struct platform_device *pdev) 790{ 791 struct fsl_otg *fsl_otg_tc; 792 int status; 793 794 if (fsl_otg_dev) 795 return 0; 796 797 /* allocate space to fsl otg device */ 798 fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL); 799 if (!fsl_otg_tc) 800 return -ENOMEM; 801 802 fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); 803 if (!fsl_otg_tc->phy.otg) { 804 kfree(fsl_otg_tc); 805 return -ENOMEM; 806 } 807 808 INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event); 809 810 INIT_LIST_HEAD(&active_timers); 811 status = fsl_otg_init_timers(&fsl_otg_tc->fsm); 812 if (status) { 813 pr_info("Couldn't init OTG timers\n"); 814 goto err; 815 } 816 mutex_init(&fsl_otg_tc->fsm.lock); 817 818 /* Set OTG state machine operations */ 819 fsl_otg_tc->fsm.ops = &fsl_otg_ops; 820 821 /* initialize the otg structure */ 822 fsl_otg_tc->phy.label = DRIVER_DESC; 823 fsl_otg_tc->phy.dev = &pdev->dev; 824 fsl_otg_tc->phy.set_power = fsl_otg_set_power; 825 826 fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy; 827 fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host; 828 fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral; 829 fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp; 830 fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp; 831 832 fsl_otg_dev = fsl_otg_tc; 833 834 /* Store the otg transceiver */ 835 status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2); 836 if (status) { 837 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n"); 838 goto err; 839 } 840 841 return 0; 842err: 843 fsl_otg_uninit_timers(); 844 kfree(fsl_otg_tc->phy.otg); 845 kfree(fsl_otg_tc); 846 return status; 847} 848 849/* OTG Initialization */ 850int usb_otg_start(struct platform_device *pdev) 851{ 852 struct fsl_otg *p_otg; 853 struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2); 854 struct otg_fsm *fsm; 855 int status; 856 struct resource *res; 857 u32 temp; 858 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); 859 860 p_otg = container_of(otg_trans, struct fsl_otg, phy); 861 fsm = &p_otg->fsm; 862 863 /* Initialize the state machine structure with default values */ 864 SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED); 865 fsm->otg = p_otg->phy.otg; 866 867 /* We don't require predefined MEM/IRQ resource index */ 868 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 869 if (!res) 870 return -ENXIO; 871 872 /* We don't request_mem_region here to enable resource sharing 873 * with host/device */ 874 875 usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap)); 876 p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs; 877 pdata->regs = (void *)usb_dr_regs; 878 879 if (pdata->init && pdata->init(pdev) != 0) 880 return -EINVAL; 881 882 if (pdata->big_endian_mmio) { 883 _fsl_readl = _fsl_readl_be; 884 _fsl_writel = _fsl_writel_be; 885 } else { 886 _fsl_readl = _fsl_readl_le; 887 _fsl_writel = _fsl_writel_le; 888 } 889 890 /* request irq */ 891 p_otg->irq = platform_get_irq(pdev, 0); 892 status = request_irq(p_otg->irq, fsl_otg_isr, 893 IRQF_SHARED, driver_name, p_otg); 894 if (status) { 895 dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n", 896 p_otg->irq, status); 897 iounmap(p_otg->dr_mem_map); 898 kfree(p_otg->phy.otg); 899 kfree(p_otg); 900 return status; 901 } 902 903 /* stop the controller */ 904 temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); 905 temp &= ~USB_CMD_RUN_STOP; 906 fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); 907 908 /* reset the controller */ 909 temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); 910 temp |= USB_CMD_CTRL_RESET; 911 fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); 912 913 /* wait reset completed */ 914 while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET) 915 ; 916 917 /* configure the VBUSHS as IDLE(both host and device) */ 918 temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0); 919 fsl_writel(temp, &p_otg->dr_mem_map->usbmode); 920 921 /* configure PHY interface */ 922 temp = fsl_readl(&p_otg->dr_mem_map->portsc); 923 temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW); 924 switch (pdata->phy_mode) { 925 case FSL_USB2_PHY_ULPI: 926 temp |= PORTSC_PTS_ULPI; 927 break; 928 case FSL_USB2_PHY_UTMI_WIDE: 929 temp |= PORTSC_PTW_16BIT; 930 /* fall through */ 931 case FSL_USB2_PHY_UTMI: 932 temp |= PORTSC_PTS_UTMI; 933 /* fall through */ 934 default: 935 break; 936 } 937 fsl_writel(temp, &p_otg->dr_mem_map->portsc); 938 939 if (pdata->have_sysif_regs) { 940 /* configure control enable IO output, big endian register */ 941 temp = __raw_readl(&p_otg->dr_mem_map->control); 942 temp |= USB_CTRL_IOENB; 943 __raw_writel(temp, &p_otg->dr_mem_map->control); 944 } 945 946 /* disable all interrupt and clear all OTGSC status */ 947 temp = fsl_readl(&p_otg->dr_mem_map->otgsc); 948 temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; 949 temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE; 950 fsl_writel(temp, &p_otg->dr_mem_map->otgsc); 951 952 /* 953 * The identification (id) input is FALSE when a Mini-A plug is inserted 954 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE. 955 * Also: record initial state of ID pin 956 */ 957 if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) { 958 p_otg->phy.otg->state = OTG_STATE_UNDEFINED; 959 p_otg->fsm.id = 1; 960 } else { 961 p_otg->phy.otg->state = OTG_STATE_A_IDLE; 962 p_otg->fsm.id = 0; 963 } 964 965 pr_debug("initial ID pin=%d\n", p_otg->fsm.id); 966 967 /* enable OTG ID pin interrupt */ 968 temp = fsl_readl(&p_otg->dr_mem_map->otgsc); 969 temp |= OTGSC_INTR_USB_ID_EN; 970 temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN); 971 fsl_writel(temp, &p_otg->dr_mem_map->otgsc); 972 973 return 0; 974} 975 976/* 977 * state file in sysfs 978 */ 979static int show_fsl_usb2_otg_state(struct device *dev, 980 struct device_attribute *attr, char *buf) 981{ 982 struct otg_fsm *fsm = &fsl_otg_dev->fsm; 983 char *next = buf; 984 unsigned size = PAGE_SIZE; 985 int t; 986 987 mutex_lock(&fsm->lock); 988 989 /* basic driver infomation */ 990 t = scnprintf(next, size, 991 DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n", 992 DRIVER_VERSION); 993 size -= t; 994 next += t; 995 996 /* Registers */ 997 t = scnprintf(next, size, 998 "OTGSC: 0x%08x\n" 999 "PORTSC: 0x%08x\n" 1000 "USBMODE: 0x%08x\n" 1001 "USBCMD: 0x%08x\n" 1002 "USBSTS: 0x%08x\n" 1003 "USBINTR: 0x%08x\n", 1004 fsl_readl(&usb_dr_regs->otgsc), 1005 fsl_readl(&usb_dr_regs->portsc), 1006 fsl_readl(&usb_dr_regs->usbmode), 1007 fsl_readl(&usb_dr_regs->usbcmd), 1008 fsl_readl(&usb_dr_regs->usbsts), 1009 fsl_readl(&usb_dr_regs->usbintr)); 1010 size -= t; 1011 next += t; 1012 1013 /* State */ 1014 t = scnprintf(next, size, 1015 "OTG state: %s\n\n", 1016 usb_otg_state_string(fsl_otg_dev->phy.otg->state)); 1017 size -= t; 1018 next += t; 1019 1020 /* State Machine Variables */ 1021 t = scnprintf(next, size, 1022 "a_bus_req: %d\n" 1023 "b_bus_req: %d\n" 1024 "a_bus_resume: %d\n" 1025 "a_bus_suspend: %d\n" 1026 "a_conn: %d\n" 1027 "a_sess_vld: %d\n" 1028 "a_srp_det: %d\n" 1029 "a_vbus_vld: %d\n" 1030 "b_bus_resume: %d\n" 1031 "b_bus_suspend: %d\n" 1032 "b_conn: %d\n" 1033 "b_se0_srp: %d\n" 1034 "b_ssend_srp: %d\n" 1035 "b_sess_vld: %d\n" 1036 "id: %d\n", 1037 fsm->a_bus_req, 1038 fsm->b_bus_req, 1039 fsm->a_bus_resume, 1040 fsm->a_bus_suspend, 1041 fsm->a_conn, 1042 fsm->a_sess_vld, 1043 fsm->a_srp_det, 1044 fsm->a_vbus_vld, 1045 fsm->b_bus_resume, 1046 fsm->b_bus_suspend, 1047 fsm->b_conn, 1048 fsm->b_se0_srp, 1049 fsm->b_ssend_srp, 1050 fsm->b_sess_vld, 1051 fsm->id); 1052 size -= t; 1053 next += t; 1054 1055 mutex_unlock(&fsm->lock); 1056 1057 return PAGE_SIZE - size; 1058} 1059 1060static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); 1061 1062 1063/* Char driver interface to control some OTG input */ 1064 1065/* 1066 * Handle some ioctl command, such as get otg 1067 * status and set host suspend 1068 */ 1069static long fsl_otg_ioctl(struct file *file, unsigned int cmd, 1070 unsigned long arg) 1071{ 1072 u32 retval = 0; 1073 1074 switch (cmd) { 1075 case GET_OTG_STATUS: 1076 retval = fsl_otg_dev->host_working; 1077 break; 1078 1079 case SET_A_SUSPEND_REQ: 1080 fsl_otg_dev->fsm.a_suspend_req_inf = arg; 1081 break; 1082 1083 case SET_A_BUS_DROP: 1084 fsl_otg_dev->fsm.a_bus_drop = arg; 1085 break; 1086 1087 case SET_A_BUS_REQ: 1088 fsl_otg_dev->fsm.a_bus_req = arg; 1089 break; 1090 1091 case SET_B_BUS_REQ: 1092 fsl_otg_dev->fsm.b_bus_req = arg; 1093 break; 1094 1095 default: 1096 break; 1097 } 1098 1099 otg_statemachine(&fsl_otg_dev->fsm); 1100 1101 return retval; 1102} 1103 1104static int fsl_otg_open(struct inode *inode, struct file *file) 1105{ 1106 return 0; 1107} 1108 1109static int fsl_otg_release(struct inode *inode, struct file *file) 1110{ 1111 return 0; 1112} 1113 1114static const struct file_operations otg_fops = { 1115 .owner = THIS_MODULE, 1116 .llseek = NULL, 1117 .read = NULL, 1118 .write = NULL, 1119 .unlocked_ioctl = fsl_otg_ioctl, 1120 .open = fsl_otg_open, 1121 .release = fsl_otg_release, 1122}; 1123 1124static int fsl_otg_probe(struct platform_device *pdev) 1125{ 1126 int ret; 1127 1128 if (!dev_get_platdata(&pdev->dev)) 1129 return -ENODEV; 1130 1131 /* configure the OTG */ 1132 ret = fsl_otg_conf(pdev); 1133 if (ret) { 1134 dev_err(&pdev->dev, "Couldn't configure OTG module\n"); 1135 return ret; 1136 } 1137 1138 /* start OTG */ 1139 ret = usb_otg_start(pdev); 1140 if (ret) { 1141 dev_err(&pdev->dev, "Can't init FSL OTG device\n"); 1142 return ret; 1143 } 1144 1145 ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops); 1146 if (ret) { 1147 dev_err(&pdev->dev, "unable to register FSL OTG device\n"); 1148 return ret; 1149 } 1150 1151 ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); 1152 if (ret) 1153 dev_warn(&pdev->dev, "Can't register sysfs attribute\n"); 1154 1155 return ret; 1156} 1157 1158static int fsl_otg_remove(struct platform_device *pdev) 1159{ 1160 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); 1161 1162 usb_remove_phy(&fsl_otg_dev->phy); 1163 free_irq(fsl_otg_dev->irq, fsl_otg_dev); 1164 1165 iounmap((void *)usb_dr_regs); 1166 1167 fsl_otg_uninit_timers(); 1168 kfree(fsl_otg_dev->phy.otg); 1169 kfree(fsl_otg_dev); 1170 1171 device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); 1172 1173 unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME); 1174 1175 if (pdata->exit) 1176 pdata->exit(pdev); 1177 1178 return 0; 1179} 1180 1181struct platform_driver fsl_otg_driver = { 1182 .probe = fsl_otg_probe, 1183 .remove = fsl_otg_remove, 1184 .driver = { 1185 .name = driver_name, 1186 .owner = THIS_MODULE, 1187 }, 1188}; 1189 1190module_platform_driver(fsl_otg_driver); 1191 1192MODULE_DESCRIPTION(DRIVER_INFO); 1193MODULE_AUTHOR(DRIVER_AUTHOR); 1194MODULE_LICENSE("GPL"); 1195