1/* 2 * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> 3 * 4 * Based on msm_serial.c, which is: 5 * Copyright (C) 2007 Google, Inc. 6 * Author: Robert Love <rlove@google.com> 7 * 8 * This software is licensed under the terms of the GNU General Public 9 * License version 2, as published by the Free Software Foundation, and 10 * may be copied, distributed, and modified under those terms. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17 18#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 19# define SUPPORT_SYSRQ 20#endif 21 22#include <linux/hrtimer.h> 23#include <linux/delay.h> 24#include <linux/module.h> 25#include <linux/io.h> 26#include <linux/ioport.h> 27#include <linux/irq.h> 28#include <linux/init.h> 29#include <linux/console.h> 30#include <linux/tty.h> 31#include <linux/tty_flip.h> 32#include <linux/serial_core.h> 33#include <linux/serial.h> 34#include <linux/slab.h> 35#include <linux/clk.h> 36#include <linux/of.h> 37#include <linux/of_device.h> 38#include <linux/err.h> 39 40/* 41 * UART Register offsets 42 */ 43 44#define VT8500_URTDR 0x0000 /* Transmit data */ 45#define VT8500_URRDR 0x0004 /* Receive data */ 46#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ 47#define VT8500_URLCR 0x000C /* Line control */ 48#define VT8500_URICR 0x0010 /* IrDA control */ 49#define VT8500_URIER 0x0014 /* Interrupt enable */ 50#define VT8500_URISR 0x0018 /* Interrupt status */ 51#define VT8500_URUSR 0x001c /* UART status */ 52#define VT8500_URFCR 0x0020 /* FIFO control */ 53#define VT8500_URFIDX 0x0024 /* FIFO index */ 54#define VT8500_URBKR 0x0028 /* Break signal count */ 55#define VT8500_URTOD 0x002c /* Time out divisor */ 56#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ 57#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ 58 59/* 60 * Interrupt enable and status bits 61 */ 62 63#define TXDE (1 << 0) /* Tx Data empty */ 64#define RXDF (1 << 1) /* Rx Data full */ 65#define TXFAE (1 << 2) /* Tx FIFO almost empty */ 66#define TXFE (1 << 3) /* Tx FIFO empty */ 67#define RXFAF (1 << 4) /* Rx FIFO almost full */ 68#define RXFF (1 << 5) /* Rx FIFO full */ 69#define TXUDR (1 << 6) /* Tx underrun */ 70#define RXOVER (1 << 7) /* Rx overrun */ 71#define PER (1 << 8) /* Parity error */ 72#define FER (1 << 9) /* Frame error */ 73#define TCTS (1 << 10) /* Toggle of CTS */ 74#define RXTOUT (1 << 11) /* Rx timeout */ 75#define BKDONE (1 << 12) /* Break signal done */ 76#define ERR (1 << 13) /* AHB error response */ 77 78#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) 79#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) 80 81/* 82 * Line control bits 83 */ 84 85#define VT8500_TXEN (1 << 0) /* Enable transmit logic */ 86#define VT8500_RXEN (1 << 1) /* Enable receive logic */ 87#define VT8500_CS8 (1 << 2) /* 8-bit data length (vs. 7-bit) */ 88#define VT8500_CSTOPB (1 << 3) /* 2 stop bits (vs. 1) */ 89#define VT8500_PARENB (1 << 4) /* Enable parity */ 90#define VT8500_PARODD (1 << 5) /* Odd parity (vs. even) */ 91#define VT8500_RTS (1 << 6) /* Ready to send */ 92#define VT8500_LOOPBK (1 << 7) /* Enable internal loopback */ 93#define VT8500_DMA (1 << 8) /* Enable DMA mode (needs FIFO) */ 94#define VT8500_BREAK (1 << 9) /* Initiate break signal */ 95#define VT8500_PSLVERR (1 << 10) /* APB error upon empty RX FIFO read */ 96#define VT8500_SWRTSCTS (1 << 11) /* Software-controlled RTS/CTS */ 97 98/* 99 * Capability flags (driver-internal) 100 */ 101 102#define VT8500_HAS_SWRTSCTS_SWITCH (1 << 1) 103 104#define VT8500_RECOMMENDED_CLK 12000000 105#define VT8500_OVERSAMPLING_DIVISOR 13 106#define VT8500_MAX_PORTS 6 107 108struct vt8500_port { 109 struct uart_port uart; 110 char name[16]; 111 struct clk *clk; 112 unsigned int clk_predivisor; 113 unsigned int ier; 114 unsigned int vt8500_uart_flags; 115}; 116 117/* 118 * we use this variable to keep track of which ports 119 * have been allocated as we can't use pdev->id in 120 * devicetree 121 */ 122static unsigned long vt8500_ports_in_use; 123 124static inline void vt8500_write(struct uart_port *port, unsigned int val, 125 unsigned int off) 126{ 127 writel(val, port->membase + off); 128} 129 130static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) 131{ 132 return readl(port->membase + off); 133} 134 135static void vt8500_stop_tx(struct uart_port *port) 136{ 137 struct vt8500_port *vt8500_port = container_of(port, 138 struct vt8500_port, 139 uart); 140 141 vt8500_port->ier &= ~TX_FIFO_INTS; 142 vt8500_write(port, vt8500_port->ier, VT8500_URIER); 143} 144 145static void vt8500_stop_rx(struct uart_port *port) 146{ 147 struct vt8500_port *vt8500_port = container_of(port, 148 struct vt8500_port, 149 uart); 150 151 vt8500_port->ier &= ~RX_FIFO_INTS; 152 vt8500_write(port, vt8500_port->ier, VT8500_URIER); 153} 154 155static void vt8500_enable_ms(struct uart_port *port) 156{ 157 struct vt8500_port *vt8500_port = container_of(port, 158 struct vt8500_port, 159 uart); 160 161 vt8500_port->ier |= TCTS; 162 vt8500_write(port, vt8500_port->ier, VT8500_URIER); 163} 164 165static void handle_rx(struct uart_port *port) 166{ 167 struct tty_port *tport = &port->state->port; 168 169 /* 170 * Handle overrun 171 */ 172 if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { 173 port->icount.overrun++; 174 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 175 } 176 177 /* and now the main RX loop */ 178 while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { 179 unsigned int c; 180 char flag = TTY_NORMAL; 181 182 c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; 183 184 /* Mask conditions we're ignorning. */ 185 c &= ~port->read_status_mask; 186 187 if (c & FER) { 188 port->icount.frame++; 189 flag = TTY_FRAME; 190 } else if (c & PER) { 191 port->icount.parity++; 192 flag = TTY_PARITY; 193 } 194 port->icount.rx++; 195 196 if (!uart_handle_sysrq_char(port, c)) 197 tty_insert_flip_char(tport, c, flag); 198 } 199 200 spin_unlock(&port->lock); 201 tty_flip_buffer_push(tport); 202 spin_lock(&port->lock); 203} 204 205static void handle_tx(struct uart_port *port) 206{ 207 struct circ_buf *xmit = &port->state->xmit; 208 209 if (port->x_char) { 210 writeb(port->x_char, port->membase + VT8500_TXFIFO); 211 port->icount.tx++; 212 port->x_char = 0; 213 } 214 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 215 vt8500_stop_tx(port); 216 return; 217 } 218 219 while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { 220 if (uart_circ_empty(xmit)) 221 break; 222 223 writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); 224 225 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 226 port->icount.tx++; 227 } 228 229 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 230 uart_write_wakeup(port); 231 232 if (uart_circ_empty(xmit)) 233 vt8500_stop_tx(port); 234} 235 236static void vt8500_start_tx(struct uart_port *port) 237{ 238 struct vt8500_port *vt8500_port = container_of(port, 239 struct vt8500_port, 240 uart); 241 242 vt8500_port->ier &= ~TX_FIFO_INTS; 243 vt8500_write(port, vt8500_port->ier, VT8500_URIER); 244 handle_tx(port); 245 vt8500_port->ier |= TX_FIFO_INTS; 246 vt8500_write(port, vt8500_port->ier, VT8500_URIER); 247} 248 249static void handle_delta_cts(struct uart_port *port) 250{ 251 port->icount.cts++; 252 wake_up_interruptible(&port->state->port.delta_msr_wait); 253} 254 255static irqreturn_t vt8500_irq(int irq, void *dev_id) 256{ 257 struct uart_port *port = dev_id; 258 unsigned long isr; 259 260 spin_lock(&port->lock); 261 isr = vt8500_read(port, VT8500_URISR); 262 263 /* Acknowledge active status bits */ 264 vt8500_write(port, isr, VT8500_URISR); 265 266 if (isr & RX_FIFO_INTS) 267 handle_rx(port); 268 if (isr & TX_FIFO_INTS) 269 handle_tx(port); 270 if (isr & TCTS) 271 handle_delta_cts(port); 272 273 spin_unlock(&port->lock); 274 275 return IRQ_HANDLED; 276} 277 278static unsigned int vt8500_tx_empty(struct uart_port *port) 279{ 280 return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? 281 TIOCSER_TEMT : 0; 282} 283 284static unsigned int vt8500_get_mctrl(struct uart_port *port) 285{ 286 unsigned int usr; 287 288 usr = vt8500_read(port, VT8500_URUSR); 289 if (usr & (1 << 4)) 290 return TIOCM_CTS; 291 else 292 return 0; 293} 294 295static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) 296{ 297 unsigned int lcr = vt8500_read(port, VT8500_URLCR); 298 299 if (mctrl & TIOCM_RTS) 300 lcr |= VT8500_RTS; 301 else 302 lcr &= ~VT8500_RTS; 303 304 vt8500_write(port, lcr, VT8500_URLCR); 305} 306 307static void vt8500_break_ctl(struct uart_port *port, int break_ctl) 308{ 309 if (break_ctl) 310 vt8500_write(port, 311 vt8500_read(port, VT8500_URLCR) | VT8500_BREAK, 312 VT8500_URLCR); 313} 314 315static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) 316{ 317 struct vt8500_port *vt8500_port = 318 container_of(port, struct vt8500_port, uart); 319 unsigned long div; 320 unsigned int loops = 1000; 321 322 div = ((vt8500_port->clk_predivisor - 1) & 0xf) << 16; 323 div |= (uart_get_divisor(port, baud) - 1) & 0x3ff; 324 325 /* Effective baud rate */ 326 baud = port->uartclk / 16 / ((div & 0x3ff) + 1); 327 328 while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) 329 cpu_relax(); 330 331 vt8500_write(port, div, VT8500_URDIV); 332 333 /* Break signal timing depends on baud rate, update accordingly */ 334 vt8500_write(port, mult_frac(baud, 4096, 1000000), VT8500_URBKR); 335 336 return baud; 337} 338 339static int vt8500_startup(struct uart_port *port) 340{ 341 struct vt8500_port *vt8500_port = 342 container_of(port, struct vt8500_port, uart); 343 int ret; 344 345 snprintf(vt8500_port->name, sizeof(vt8500_port->name), 346 "vt8500_serial%d", port->line); 347 348 ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, 349 vt8500_port->name, port); 350 if (unlikely(ret)) 351 return ret; 352 353 vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ 354 355 return 0; 356} 357 358static void vt8500_shutdown(struct uart_port *port) 359{ 360 struct vt8500_port *vt8500_port = 361 container_of(port, struct vt8500_port, uart); 362 363 vt8500_port->ier = 0; 364 365 /* disable interrupts and FIFOs */ 366 vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); 367 vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); 368 free_irq(port->irq, port); 369} 370 371static void vt8500_set_termios(struct uart_port *port, 372 struct ktermios *termios, 373 struct ktermios *old) 374{ 375 struct vt8500_port *vt8500_port = 376 container_of(port, struct vt8500_port, uart); 377 unsigned long flags; 378 unsigned int baud, lcr; 379 unsigned int loops = 1000; 380 381 spin_lock_irqsave(&port->lock, flags); 382 383 /* calculate and set baud rate */ 384 baud = uart_get_baud_rate(port, termios, old, 900, 921600); 385 baud = vt8500_set_baud_rate(port, baud); 386 if (tty_termios_baud_rate(termios)) 387 tty_termios_encode_baud_rate(termios, baud, baud); 388 389 /* calculate parity */ 390 lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); 391 lcr &= ~(VT8500_PARENB | VT8500_PARODD); 392 if (termios->c_cflag & PARENB) { 393 lcr |= VT8500_PARENB; 394 termios->c_cflag &= ~CMSPAR; 395 if (termios->c_cflag & PARODD) 396 lcr |= VT8500_PARODD; 397 } 398 399 /* calculate bits per char */ 400 lcr &= ~VT8500_CS8; 401 switch (termios->c_cflag & CSIZE) { 402 case CS7: 403 break; 404 case CS8: 405 default: 406 lcr |= VT8500_CS8; 407 termios->c_cflag &= ~CSIZE; 408 termios->c_cflag |= CS8; 409 break; 410 } 411 412 /* calculate stop bits */ 413 lcr &= ~VT8500_CSTOPB; 414 if (termios->c_cflag & CSTOPB) 415 lcr |= VT8500_CSTOPB; 416 417 lcr &= ~VT8500_SWRTSCTS; 418 if (vt8500_port->vt8500_uart_flags & VT8500_HAS_SWRTSCTS_SWITCH) 419 lcr |= VT8500_SWRTSCTS; 420 421 /* set parity, bits per char, and stop bit */ 422 vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); 423 424 /* Configure status bits to ignore based on termio flags. */ 425 port->read_status_mask = 0; 426 if (termios->c_iflag & IGNPAR) 427 port->read_status_mask = FER | PER; 428 429 uart_update_timeout(port, termios->c_cflag, baud); 430 431 /* Reset FIFOs */ 432 vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); 433 while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) 434 && --loops) 435 cpu_relax(); 436 437 /* Every possible FIFO-related interrupt */ 438 vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; 439 440 /* 441 * CTS flow control 442 */ 443 if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) 444 vt8500_port->ier |= TCTS; 445 446 vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); 447 vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); 448 449 spin_unlock_irqrestore(&port->lock, flags); 450} 451 452static const char *vt8500_type(struct uart_port *port) 453{ 454 struct vt8500_port *vt8500_port = 455 container_of(port, struct vt8500_port, uart); 456 return vt8500_port->name; 457} 458 459static void vt8500_release_port(struct uart_port *port) 460{ 461} 462 463static int vt8500_request_port(struct uart_port *port) 464{ 465 return 0; 466} 467 468static void vt8500_config_port(struct uart_port *port, int flags) 469{ 470 port->type = PORT_VT8500; 471} 472 473static int vt8500_verify_port(struct uart_port *port, 474 struct serial_struct *ser) 475{ 476 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) 477 return -EINVAL; 478 if (unlikely(port->irq != ser->irq)) 479 return -EINVAL; 480 return 0; 481} 482 483static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS]; 484static struct uart_driver vt8500_uart_driver; 485 486#ifdef CONFIG_SERIAL_VT8500_CONSOLE 487 488static inline void wait_for_xmitr(struct uart_port *port) 489{ 490 unsigned int status, tmout = 10000; 491 492 /* Wait up to 10ms for the character(s) to be sent. */ 493 do { 494 status = vt8500_read(port, VT8500_URFIDX); 495 496 if (--tmout == 0) 497 break; 498 udelay(1); 499 } while (status & 0x10); 500} 501 502static void vt8500_console_putchar(struct uart_port *port, int c) 503{ 504 wait_for_xmitr(port); 505 writeb(c, port->membase + VT8500_TXFIFO); 506} 507 508static void vt8500_console_write(struct console *co, const char *s, 509 unsigned int count) 510{ 511 struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; 512 unsigned long ier; 513 514 BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); 515 516 ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); 517 vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); 518 519 uart_console_write(&vt8500_port->uart, s, count, 520 vt8500_console_putchar); 521 522 /* 523 * Finally, wait for transmitter to become empty 524 * and switch back to FIFO 525 */ 526 wait_for_xmitr(&vt8500_port->uart); 527 vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); 528} 529 530static int __init vt8500_console_setup(struct console *co, char *options) 531{ 532 struct vt8500_port *vt8500_port; 533 int baud = 9600; 534 int bits = 8; 535 int parity = 'n'; 536 int flow = 'n'; 537 538 if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) 539 return -ENXIO; 540 541 vt8500_port = vt8500_uart_ports[co->index]; 542 543 if (!vt8500_port) 544 return -ENODEV; 545 546 if (options) 547 uart_parse_options(options, &baud, &parity, &bits, &flow); 548 549 return uart_set_options(&vt8500_port->uart, 550 co, baud, parity, bits, flow); 551} 552 553static struct console vt8500_console = { 554 .name = "ttyWMT", 555 .write = vt8500_console_write, 556 .device = uart_console_device, 557 .setup = vt8500_console_setup, 558 .flags = CON_PRINTBUFFER, 559 .index = -1, 560 .data = &vt8500_uart_driver, 561}; 562 563#define VT8500_CONSOLE (&vt8500_console) 564 565#else 566#define VT8500_CONSOLE NULL 567#endif 568 569#ifdef CONFIG_CONSOLE_POLL 570static int vt8500_get_poll_char(struct uart_port *port) 571{ 572 unsigned int status = vt8500_read(port, VT8500_URFIDX); 573 574 if (!(status & 0x1f00)) 575 return NO_POLL_CHAR; 576 577 return vt8500_read(port, VT8500_RXFIFO) & 0xff; 578} 579 580static void vt8500_put_poll_char(struct uart_port *port, unsigned char c) 581{ 582 unsigned int status, tmout = 10000; 583 584 do { 585 status = vt8500_read(port, VT8500_URFIDX); 586 587 if (--tmout == 0) 588 break; 589 udelay(1); 590 } while (status & 0x10); 591 592 vt8500_write(port, c, VT8500_TXFIFO); 593} 594#endif 595 596static struct uart_ops vt8500_uart_pops = { 597 .tx_empty = vt8500_tx_empty, 598 .set_mctrl = vt8500_set_mctrl, 599 .get_mctrl = vt8500_get_mctrl, 600 .stop_tx = vt8500_stop_tx, 601 .start_tx = vt8500_start_tx, 602 .stop_rx = vt8500_stop_rx, 603 .enable_ms = vt8500_enable_ms, 604 .break_ctl = vt8500_break_ctl, 605 .startup = vt8500_startup, 606 .shutdown = vt8500_shutdown, 607 .set_termios = vt8500_set_termios, 608 .type = vt8500_type, 609 .release_port = vt8500_release_port, 610 .request_port = vt8500_request_port, 611 .config_port = vt8500_config_port, 612 .verify_port = vt8500_verify_port, 613#ifdef CONFIG_CONSOLE_POLL 614 .poll_get_char = vt8500_get_poll_char, 615 .poll_put_char = vt8500_put_poll_char, 616#endif 617}; 618 619static struct uart_driver vt8500_uart_driver = { 620 .owner = THIS_MODULE, 621 .driver_name = "vt8500_serial", 622 .dev_name = "ttyWMT", 623 .nr = 6, 624 .cons = VT8500_CONSOLE, 625}; 626 627static unsigned int vt8500_flags; /* none required so far */ 628static unsigned int wm8880_flags = VT8500_HAS_SWRTSCTS_SWITCH; 629 630static const struct of_device_id wmt_dt_ids[] = { 631 { .compatible = "via,vt8500-uart", .data = &vt8500_flags}, 632 { .compatible = "wm,wm8880-uart", .data = &wm8880_flags}, 633 {} 634}; 635 636static int vt8500_serial_probe(struct platform_device *pdev) 637{ 638 struct vt8500_port *vt8500_port; 639 struct resource *mmres, *irqres; 640 struct device_node *np = pdev->dev.of_node; 641 const struct of_device_id *match; 642 const unsigned int *flags; 643 int ret; 644 int port; 645 646 match = of_match_device(wmt_dt_ids, &pdev->dev); 647 if (!match) 648 return -EINVAL; 649 650 flags = match->data; 651 652 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); 653 irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 654 if (!mmres || !irqres) 655 return -ENODEV; 656 657 if (np) { 658 port = of_alias_get_id(np, "serial"); 659 if (port >= VT8500_MAX_PORTS) 660 port = -1; 661 } else { 662 port = -1; 663 } 664 665 if (port < 0) { 666 /* calculate the port id */ 667 port = find_first_zero_bit(&vt8500_ports_in_use, 668 sizeof(vt8500_ports_in_use)); 669 } 670 671 if (port >= VT8500_MAX_PORTS) 672 return -ENODEV; 673 674 /* reserve the port id */ 675 if (test_and_set_bit(port, &vt8500_ports_in_use)) { 676 /* port already in use - shouldn't really happen */ 677 return -EBUSY; 678 } 679 680 vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port), 681 GFP_KERNEL); 682 if (!vt8500_port) 683 return -ENOMEM; 684 685 vt8500_port->uart.membase = devm_ioremap_resource(&pdev->dev, mmres); 686 if (IS_ERR(vt8500_port->uart.membase)) 687 return PTR_ERR(vt8500_port->uart.membase); 688 689 vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); 690 if (IS_ERR(vt8500_port->clk)) { 691 dev_err(&pdev->dev, "failed to get clock\n"); 692 return -EINVAL; 693 } 694 695 ret = clk_prepare_enable(vt8500_port->clk); 696 if (ret) { 697 dev_err(&pdev->dev, "failed to enable clock\n"); 698 return ret; 699 } 700 701 vt8500_port->vt8500_uart_flags = *flags; 702 vt8500_port->clk_predivisor = DIV_ROUND_CLOSEST( 703 clk_get_rate(vt8500_port->clk), 704 VT8500_RECOMMENDED_CLK 705 ); 706 vt8500_port->uart.type = PORT_VT8500; 707 vt8500_port->uart.iotype = UPIO_MEM; 708 vt8500_port->uart.mapbase = mmres->start; 709 vt8500_port->uart.irq = irqres->start; 710 vt8500_port->uart.fifosize = 16; 711 vt8500_port->uart.ops = &vt8500_uart_pops; 712 vt8500_port->uart.line = port; 713 vt8500_port->uart.dev = &pdev->dev; 714 vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; 715 716 /* Serial core uses the magic "16" everywhere - adjust for it */ 717 vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) / 718 vt8500_port->clk_predivisor / 719 VT8500_OVERSAMPLING_DIVISOR; 720 721 snprintf(vt8500_port->name, sizeof(vt8500_port->name), 722 "VT8500 UART%d", pdev->id); 723 724 vt8500_uart_ports[port] = vt8500_port; 725 726 uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); 727 728 platform_set_drvdata(pdev, vt8500_port); 729 730 return 0; 731} 732 733static int vt8500_serial_remove(struct platform_device *pdev) 734{ 735 struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); 736 737 clk_disable_unprepare(vt8500_port->clk); 738 uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); 739 740 return 0; 741} 742 743static struct platform_driver vt8500_platform_driver = { 744 .probe = vt8500_serial_probe, 745 .remove = vt8500_serial_remove, 746 .driver = { 747 .name = "vt8500_serial", 748 .of_match_table = wmt_dt_ids, 749 }, 750}; 751 752static int __init vt8500_serial_init(void) 753{ 754 int ret; 755 756 ret = uart_register_driver(&vt8500_uart_driver); 757 if (unlikely(ret)) 758 return ret; 759 760 ret = platform_driver_register(&vt8500_platform_driver); 761 762 if (unlikely(ret)) 763 uart_unregister_driver(&vt8500_uart_driver); 764 765 return ret; 766} 767 768static void __exit vt8500_serial_exit(void) 769{ 770#ifdef CONFIG_SERIAL_VT8500_CONSOLE 771 unregister_console(&vt8500_console); 772#endif 773 platform_driver_unregister(&vt8500_platform_driver); 774 uart_unregister_driver(&vt8500_uart_driver); 775} 776 777module_init(vt8500_serial_init); 778module_exit(vt8500_serial_exit); 779 780MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>"); 781MODULE_DESCRIPTION("Driver for vt8500 serial device"); 782MODULE_LICENSE("GPL v2"); 783