1/* 2 * MPC512x PSC in SPI mode driver. 3 * 4 * Copyright (C) 2007,2008 Freescale Semiconductor Inc. 5 * Original port from 52xx driver: 6 * Hongjun Chen <hong-jun.chen@freescale.com> 7 * 8 * Fork of mpc52xx_psc_spi.c: 9 * Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 */ 16 17#include <linux/module.h> 18#include <linux/kernel.h> 19#include <linux/errno.h> 20#include <linux/interrupt.h> 21#include <linux/of_address.h> 22#include <linux/of_irq.h> 23#include <linux/of_platform.h> 24#include <linux/completion.h> 25#include <linux/io.h> 26#include <linux/delay.h> 27#include <linux/clk.h> 28#include <linux/spi/spi.h> 29#include <linux/fsl_devices.h> 30#include <linux/gpio.h> 31#include <asm/mpc52xx_psc.h> 32 33enum { 34 TYPE_MPC5121, 35 TYPE_MPC5125, 36}; 37 38/* 39 * This macro abstracts the differences in the PSC register layout between 40 * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc). 41 */ 42#define psc_addr(mps, regname) ({ \ 43 void *__ret = NULL; \ 44 switch (mps->type) { \ 45 case TYPE_MPC5121: { \ 46 struct mpc52xx_psc __iomem *psc = mps->psc; \ 47 __ret = &psc->regname; \ 48 }; \ 49 break; \ 50 case TYPE_MPC5125: { \ 51 struct mpc5125_psc __iomem *psc = mps->psc; \ 52 __ret = &psc->regname; \ 53 }; \ 54 break; \ 55 } \ 56 __ret; }) 57 58struct mpc512x_psc_spi { 59 void (*cs_control)(struct spi_device *spi, bool on); 60 61 /* driver internal data */ 62 int type; 63 void __iomem *psc; 64 struct mpc512x_psc_fifo __iomem *fifo; 65 unsigned int irq; 66 u8 bits_per_word; 67 struct clk *clk_mclk; 68 struct clk *clk_ipg; 69 u32 mclk_rate; 70 71 struct completion txisrdone; 72}; 73 74/* controller state */ 75struct mpc512x_psc_spi_cs { 76 int bits_per_word; 77 int speed_hz; 78}; 79 80/* set clock freq, clock ramp, bits per work 81 * if t is NULL then reset the values to the default values 82 */ 83static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi, 84 struct spi_transfer *t) 85{ 86 struct mpc512x_psc_spi_cs *cs = spi->controller_state; 87 88 cs->speed_hz = (t && t->speed_hz) 89 ? t->speed_hz : spi->max_speed_hz; 90 cs->bits_per_word = (t && t->bits_per_word) 91 ? t->bits_per_word : spi->bits_per_word; 92 cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8; 93 return 0; 94} 95 96static void mpc512x_psc_spi_activate_cs(struct spi_device *spi) 97{ 98 struct mpc512x_psc_spi_cs *cs = spi->controller_state; 99 struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); 100 u32 sicr; 101 u32 ccr; 102 int speed; 103 u16 bclkdiv; 104 105 sicr = in_be32(psc_addr(mps, sicr)); 106 107 /* Set clock phase and polarity */ 108 if (spi->mode & SPI_CPHA) 109 sicr |= 0x00001000; 110 else 111 sicr &= ~0x00001000; 112 113 if (spi->mode & SPI_CPOL) 114 sicr |= 0x00002000; 115 else 116 sicr &= ~0x00002000; 117 118 if (spi->mode & SPI_LSB_FIRST) 119 sicr |= 0x10000000; 120 else 121 sicr &= ~0x10000000; 122 out_be32(psc_addr(mps, sicr), sicr); 123 124 ccr = in_be32(psc_addr(mps, ccr)); 125 ccr &= 0xFF000000; 126 speed = cs->speed_hz; 127 if (!speed) 128 speed = 1000000; /* default 1MHz */ 129 bclkdiv = (mps->mclk_rate / speed) - 1; 130 131 ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8)); 132 out_be32(psc_addr(mps, ccr), ccr); 133 mps->bits_per_word = cs->bits_per_word; 134 135 if (mps->cs_control && gpio_is_valid(spi->cs_gpio)) 136 mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0); 137} 138 139static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi) 140{ 141 struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); 142 143 if (mps->cs_control && gpio_is_valid(spi->cs_gpio)) 144 mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1); 145 146} 147 148/* extract and scale size field in txsz or rxsz */ 149#define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2); 150 151#define EOFBYTE 1 152 153static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi, 154 struct spi_transfer *t) 155{ 156 struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); 157 struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; 158 size_t tx_len = t->len; 159 size_t rx_len = t->len; 160 u8 *tx_buf = (u8 *)t->tx_buf; 161 u8 *rx_buf = (u8 *)t->rx_buf; 162 163 if (!tx_buf && !rx_buf && t->len) 164 return -EINVAL; 165 166 while (rx_len || tx_len) { 167 size_t txcount; 168 u8 data; 169 size_t fifosz; 170 size_t rxcount; 171 int rxtries; 172 173 /* 174 * send the TX bytes in as large a chunk as possible 175 * but neither exceed the TX nor the RX FIFOs 176 */ 177 fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz)); 178 txcount = min(fifosz, tx_len); 179 fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz)); 180 fifosz -= in_be32(&fifo->rxcnt) + 1; 181 txcount = min(fifosz, txcount); 182 if (txcount) { 183 184 /* fill the TX FIFO */ 185 while (txcount-- > 0) { 186 data = tx_buf ? *tx_buf++ : 0; 187 if (tx_len == EOFBYTE && t->cs_change) 188 setbits32(&fifo->txcmd, 189 MPC512x_PSC_FIFO_EOF); 190 out_8(&fifo->txdata_8, data); 191 tx_len--; 192 } 193 194 /* have the ISR trigger when the TX FIFO is empty */ 195 reinit_completion(&mps->txisrdone); 196 out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY); 197 out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY); 198 wait_for_completion(&mps->txisrdone); 199 } 200 201 /* 202 * consume as much RX data as the FIFO holds, while we 203 * iterate over the transfer's TX data length 204 * 205 * only insist in draining all the remaining RX bytes 206 * when the TX bytes were exhausted (that's at the very 207 * end of this transfer, not when still iterating over 208 * the transfer's chunks) 209 */ 210 rxtries = 50; 211 do { 212 213 /* 214 * grab whatever was in the FIFO when we started 215 * looking, don't bother fetching what was added to 216 * the FIFO while we read from it -- we'll return 217 * here eventually and prefer sending out remaining 218 * TX data 219 */ 220 fifosz = in_be32(&fifo->rxcnt); 221 rxcount = min(fifosz, rx_len); 222 while (rxcount-- > 0) { 223 data = in_8(&fifo->rxdata_8); 224 if (rx_buf) 225 *rx_buf++ = data; 226 rx_len--; 227 } 228 229 /* 230 * come back later if there still is TX data to send, 231 * bail out of the RX drain loop if all of the TX data 232 * was sent and all of the RX data was received (i.e. 233 * when the transmission has completed) 234 */ 235 if (tx_len) 236 break; 237 if (!rx_len) 238 break; 239 240 /* 241 * TX data transmission has completed while RX data 242 * is still pending -- that's a transient situation 243 * which depends on wire speed and specific 244 * hardware implementation details (buffering) yet 245 * should resolve very quickly 246 * 247 * just yield for a moment to not hog the CPU for 248 * too long when running SPI at low speed 249 * 250 * the timeout range is rather arbitrary and tries 251 * to balance throughput against system load; the 252 * chosen values result in a minimal timeout of 50 253 * times 10us and thus work at speeds as low as 254 * some 20kbps, while the maximum timeout at the 255 * transfer's end could be 5ms _if_ nothing else 256 * ticks in the system _and_ RX data still wasn't 257 * received, which only occurs in situations that 258 * are exceptional; removing the unpredictability 259 * of the timeout either decreases throughput 260 * (longer timeouts), or puts more load on the 261 * system (fixed short timeouts) or requires the 262 * use of a timeout API instead of a counter and an 263 * unknown inner delay 264 */ 265 usleep_range(10, 100); 266 267 } while (--rxtries > 0); 268 if (!tx_len && rx_len && !rxtries) { 269 /* 270 * not enough RX bytes even after several retries 271 * and the resulting rather long timeout? 272 */ 273 rxcount = in_be32(&fifo->rxcnt); 274 dev_warn(&spi->dev, 275 "short xfer, missing %zd RX bytes, FIFO level %zd\n", 276 rx_len, rxcount); 277 } 278 279 /* 280 * drain and drop RX data which "should not be there" in 281 * the first place, for undisturbed transmission this turns 282 * into a NOP (except for the FIFO level fetch) 283 */ 284 if (!tx_len && !rx_len) { 285 while (in_be32(&fifo->rxcnt)) 286 in_8(&fifo->rxdata_8); 287 } 288 289 } 290 return 0; 291} 292 293static int mpc512x_psc_spi_msg_xfer(struct spi_master *master, 294 struct spi_message *m) 295{ 296 struct spi_device *spi; 297 unsigned cs_change; 298 int status; 299 struct spi_transfer *t; 300 301 spi = m->spi; 302 cs_change = 1; 303 status = 0; 304 list_for_each_entry(t, &m->transfers, transfer_list) { 305 status = mpc512x_psc_spi_transfer_setup(spi, t); 306 if (status < 0) 307 break; 308 309 if (cs_change) 310 mpc512x_psc_spi_activate_cs(spi); 311 cs_change = t->cs_change; 312 313 status = mpc512x_psc_spi_transfer_rxtx(spi, t); 314 if (status) 315 break; 316 m->actual_length += t->len; 317 318 if (t->delay_usecs) 319 udelay(t->delay_usecs); 320 321 if (cs_change) 322 mpc512x_psc_spi_deactivate_cs(spi); 323 } 324 325 m->status = status; 326 if (m->complete) 327 m->complete(m->context); 328 329 if (status || !cs_change) 330 mpc512x_psc_spi_deactivate_cs(spi); 331 332 mpc512x_psc_spi_transfer_setup(spi, NULL); 333 334 spi_finalize_current_message(master); 335 return status; 336} 337 338static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master) 339{ 340 struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); 341 342 dev_dbg(&master->dev, "%s()\n", __func__); 343 344 /* Zero MR2 */ 345 in_8(psc_addr(mps, mr2)); 346 out_8(psc_addr(mps, mr2), 0x0); 347 348 /* enable transmitter/receiver */ 349 out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); 350 351 return 0; 352} 353 354static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master) 355{ 356 struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); 357 struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; 358 359 dev_dbg(&master->dev, "%s()\n", __func__); 360 361 /* disable transmitter/receiver and fifo interrupt */ 362 out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); 363 out_be32(&fifo->tximr, 0); 364 365 return 0; 366} 367 368static int mpc512x_psc_spi_setup(struct spi_device *spi) 369{ 370 struct mpc512x_psc_spi_cs *cs = spi->controller_state; 371 int ret; 372 373 if (spi->bits_per_word % 8) 374 return -EINVAL; 375 376 if (!cs) { 377 cs = kzalloc(sizeof *cs, GFP_KERNEL); 378 if (!cs) 379 return -ENOMEM; 380 381 if (gpio_is_valid(spi->cs_gpio)) { 382 ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); 383 if (ret) { 384 dev_err(&spi->dev, "can't get CS gpio: %d\n", 385 ret); 386 kfree(cs); 387 return ret; 388 } 389 gpio_direction_output(spi->cs_gpio, 390 spi->mode & SPI_CS_HIGH ? 0 : 1); 391 } 392 393 spi->controller_state = cs; 394 } 395 396 cs->bits_per_word = spi->bits_per_word; 397 cs->speed_hz = spi->max_speed_hz; 398 399 return 0; 400} 401 402static void mpc512x_psc_spi_cleanup(struct spi_device *spi) 403{ 404 if (gpio_is_valid(spi->cs_gpio)) 405 gpio_free(spi->cs_gpio); 406 kfree(spi->controller_state); 407} 408 409static int mpc512x_psc_spi_port_config(struct spi_master *master, 410 struct mpc512x_psc_spi *mps) 411{ 412 struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; 413 u32 sicr; 414 u32 ccr; 415 int speed; 416 u16 bclkdiv; 417 418 /* Reset the PSC into a known state */ 419 out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX); 420 out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX); 421 out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); 422 423 /* Disable psc interrupts all useful interrupts are in fifo */ 424 out_be16(psc_addr(mps, isr_imr.imr), 0); 425 426 /* Disable fifo interrupts, will be enabled later */ 427 out_be32(&fifo->tximr, 0); 428 out_be32(&fifo->rximr, 0); 429 430 /* Setup fifo slice address and size */ 431 /*out_be32(&fifo->txsz, 0x0fe00004);*/ 432 /*out_be32(&fifo->rxsz, 0x0ff00004);*/ 433 434 sicr = 0x01000000 | /* SIM = 0001 -- 8 bit */ 435 0x00800000 | /* GenClk = 1 -- internal clk */ 436 0x00008000 | /* SPI = 1 */ 437 0x00004000 | /* MSTR = 1 -- SPI master */ 438 0x00000800; /* UseEOF = 1 -- SS low until EOF */ 439 440 out_be32(psc_addr(mps, sicr), sicr); 441 442 ccr = in_be32(psc_addr(mps, ccr)); 443 ccr &= 0xFF000000; 444 speed = 1000000; /* default 1MHz */ 445 bclkdiv = (mps->mclk_rate / speed) - 1; 446 ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8)); 447 out_be32(psc_addr(mps, ccr), ccr); 448 449 /* Set 2ms DTL delay */ 450 out_8(psc_addr(mps, ctur), 0x00); 451 out_8(psc_addr(mps, ctlr), 0x82); 452 453 /* we don't use the alarms */ 454 out_be32(&fifo->rxalarm, 0xfff); 455 out_be32(&fifo->txalarm, 0); 456 457 /* Enable FIFO slices for Rx/Tx */ 458 out_be32(&fifo->rxcmd, 459 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA); 460 out_be32(&fifo->txcmd, 461 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA); 462 463 mps->bits_per_word = 8; 464 465 return 0; 466} 467 468static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id) 469{ 470 struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id; 471 struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; 472 473 /* clear interrupt and wake up the rx/tx routine */ 474 if (in_be32(&fifo->txisr) & 475 in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) { 476 out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY); 477 out_be32(&fifo->tximr, 0); 478 complete(&mps->txisrdone); 479 return IRQ_HANDLED; 480 } 481 return IRQ_NONE; 482} 483 484static void mpc512x_spi_cs_control(struct spi_device *spi, bool onoff) 485{ 486 gpio_set_value(spi->cs_gpio, onoff); 487} 488 489static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, 490 u32 size, unsigned int irq) 491{ 492 struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); 493 struct mpc512x_psc_spi *mps; 494 struct spi_master *master; 495 int ret; 496 void *tempp; 497 struct clk *clk; 498 499 master = spi_alloc_master(dev, sizeof *mps); 500 if (master == NULL) 501 return -ENOMEM; 502 503 dev_set_drvdata(dev, master); 504 mps = spi_master_get_devdata(master); 505 mps->type = (int)of_device_get_match_data(dev); 506 mps->irq = irq; 507 508 if (pdata == NULL) { 509 mps->cs_control = mpc512x_spi_cs_control; 510 } else { 511 mps->cs_control = pdata->cs_control; 512 master->bus_num = pdata->bus_num; 513 master->num_chipselect = pdata->max_chipselect; 514 } 515 516 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; 517 master->setup = mpc512x_psc_spi_setup; 518 master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw; 519 master->transfer_one_message = mpc512x_psc_spi_msg_xfer; 520 master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw; 521 master->cleanup = mpc512x_psc_spi_cleanup; 522 master->dev.of_node = dev->of_node; 523 524 tempp = devm_ioremap(dev, regaddr, size); 525 if (!tempp) { 526 dev_err(dev, "could not ioremap I/O port range\n"); 527 ret = -EFAULT; 528 goto free_master; 529 } 530 mps->psc = tempp; 531 mps->fifo = 532 (struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc)); 533 ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED, 534 "mpc512x-psc-spi", mps); 535 if (ret) 536 goto free_master; 537 init_completion(&mps->txisrdone); 538 539 clk = devm_clk_get(dev, "mclk"); 540 if (IS_ERR(clk)) { 541 ret = PTR_ERR(clk); 542 goto free_master; 543 } 544 ret = clk_prepare_enable(clk); 545 if (ret) 546 goto free_master; 547 mps->clk_mclk = clk; 548 mps->mclk_rate = clk_get_rate(clk); 549 550 clk = devm_clk_get(dev, "ipg"); 551 if (IS_ERR(clk)) { 552 ret = PTR_ERR(clk); 553 goto free_mclk_clock; 554 } 555 ret = clk_prepare_enable(clk); 556 if (ret) 557 goto free_mclk_clock; 558 mps->clk_ipg = clk; 559 560 ret = mpc512x_psc_spi_port_config(master, mps); 561 if (ret < 0) 562 goto free_ipg_clock; 563 564 ret = devm_spi_register_master(dev, master); 565 if (ret < 0) 566 goto free_ipg_clock; 567 568 return ret; 569 570free_ipg_clock: 571 clk_disable_unprepare(mps->clk_ipg); 572free_mclk_clock: 573 clk_disable_unprepare(mps->clk_mclk); 574free_master: 575 spi_master_put(master); 576 577 return ret; 578} 579 580static int mpc512x_psc_spi_do_remove(struct device *dev) 581{ 582 struct spi_master *master = dev_get_drvdata(dev); 583 struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); 584 585 clk_disable_unprepare(mps->clk_mclk); 586 clk_disable_unprepare(mps->clk_ipg); 587 588 return 0; 589} 590 591static int mpc512x_psc_spi_of_probe(struct platform_device *op) 592{ 593 const u32 *regaddr_p; 594 u64 regaddr64, size64; 595 596 regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL); 597 if (!regaddr_p) { 598 dev_err(&op->dev, "Invalid PSC address\n"); 599 return -EINVAL; 600 } 601 regaddr64 = of_translate_address(op->dev.of_node, regaddr_p); 602 603 return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64, 604 irq_of_parse_and_map(op->dev.of_node, 0)); 605} 606 607static int mpc512x_psc_spi_of_remove(struct platform_device *op) 608{ 609 return mpc512x_psc_spi_do_remove(&op->dev); 610} 611 612static const struct of_device_id mpc512x_psc_spi_of_match[] = { 613 { .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 }, 614 { .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 }, 615 {}, 616}; 617 618MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match); 619 620static struct platform_driver mpc512x_psc_spi_of_driver = { 621 .probe = mpc512x_psc_spi_of_probe, 622 .remove = mpc512x_psc_spi_of_remove, 623 .driver = { 624 .name = "mpc512x-psc-spi", 625 .of_match_table = mpc512x_psc_spi_of_match, 626 }, 627}; 628module_platform_driver(mpc512x_psc_spi_of_driver); 629 630MODULE_AUTHOR("John Rigby"); 631MODULE_DESCRIPTION("MPC512x PSC SPI Driver"); 632MODULE_LICENSE("GPL"); 633