1/* 2 * ASCII values for a number of symbolic constants, printing functions, 3 * etc. 4 * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) 5 * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) 6 * by D. Gilbert and aeb (20020609) 7 * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701 8 */ 9 10#include <linux/blkdev.h> 11#include <linux/module.h> 12#include <linux/kernel.h> 13 14#include <scsi/scsi.h> 15#include <scsi/scsi_cmnd.h> 16#include <scsi/scsi_device.h> 17#include <scsi/scsi_host.h> 18#include <scsi/scsi_eh.h> 19#include <scsi/scsi_dbg.h> 20 21/* Commands with service actions that change the command name */ 22#define THIRD_PARTY_COPY_OUT 0x83 23#define THIRD_PARTY_COPY_IN 0x84 24 25struct sa_name_list { 26 int opcode; 27 const struct value_name_pair *arr; 28 int arr_sz; 29}; 30 31struct value_name_pair { 32 int value; 33 const char * name; 34}; 35 36static const char * cdb_byte0_names[] = { 37/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", 38/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, 39 "Reassign Blocks", 40/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, 41/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", 42/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", 43 "Reserve(6)", 44/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)", 45/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", 46/* 1e-1f */ "Prevent/Allow Medium Removal", NULL, 47/* 20-22 */ NULL, NULL, NULL, 48/* 23-28 */ "Read Format Capacities", "Set Window", 49 "Read Capacity(10)", NULL, NULL, "Read(10)", 50/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)", 51 "Read updated block", 52/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal", 53/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", 54/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)", 55 "Read Defect Data(10)", 56/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", 57 "Read Buffer", 58/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)", 59/* 40-41 */ "Change Definition", "Write Same(10)", 60/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP", 61 "Read density support", "Play audio(10)", "Get configuration", 62 "Play audio msf", "Sanitize/Play audio track/index", 63/* 49-4f */ "Play track relative(10)", "Get event status notification", 64 "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", 65 NULL, 66/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", 67 "Reserve track", "Send OPC info", "Mode Select(10)", 68/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue", 69 "Mode Sense(10)", "Close track/session", 70/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", 71 "Persistent reserve out", 72/* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 73/* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 74/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 75/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB", 76 "Variable length", 77/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", 78 "Third party copy out", "Third party copy in", 79/* 85-89 */ "ATA command pass through(16)", "Access control in", 80 "Access control out", "Read(16)", "Compare and Write", 81/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes", 82 "Write and verify(16)", "Verify(16)", 83/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)", 84 "Lock/unlock cache(16)", "Write same(16)", NULL, 85/* 95-99 */ NULL, NULL, NULL, NULL, NULL, 86/* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional", 87 "Service action in(16)", "Service action out(16)", 88/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank", 89 "Security protocol in", "Maintenance in", "Maintenance out", 90 "Move medium/play audio(12)", 91/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", 92 "Play track relative(12)", 93/* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", 94 "Read DVD structure", "Write and verify(12)", 95/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", 96/* b2-b4 */ "Search data low(12)", "Set limits(12)", 97 "Read element status attached", 98/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming", 99/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", 100/* ba-bc */ "Redundancy group (in), Scan", 101 "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", 102/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", 103 "Volume set (out), Send DVD structure", 104}; 105 106static const struct value_name_pair maint_in_arr[] = { 107 {0x5, "Report identifying information"}, 108 {0xa, "Report target port groups"}, 109 {0xb, "Report aliases"}, 110 {0xc, "Report supported operation codes"}, 111 {0xd, "Report supported task management functions"}, 112 {0xe, "Report priority"}, 113 {0xf, "Report timestamp"}, 114 {0x10, "Management protocol in"}, 115}; 116#define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) 117 118static const struct value_name_pair maint_out_arr[] = { 119 {0x6, "Set identifying information"}, 120 {0xa, "Set target port groups"}, 121 {0xb, "Change aliases"}, 122 {0xc, "Remove I_T nexus"}, 123 {0xe, "Set priority"}, 124 {0xf, "Set timestamp"}, 125 {0x10, "Management protocol out"}, 126}; 127#define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) 128 129static const struct value_name_pair serv_in12_arr[] = { 130 {0x1, "Read media serial number"}, 131}; 132#define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr) 133 134static const struct value_name_pair serv_out12_arr[] = { 135 {-1, "dummy entry"}, 136}; 137#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr) 138 139static const struct value_name_pair serv_bidi_arr[] = { 140 {-1, "dummy entry"}, 141}; 142#define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr) 143 144static const struct value_name_pair serv_in16_arr[] = { 145 {0x10, "Read capacity(16)"}, 146 {0x11, "Read long(16)"}, 147 {0x12, "Get LBA status"}, 148 {0x13, "Report referrals"}, 149}; 150#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr) 151 152static const struct value_name_pair serv_out16_arr[] = { 153 {0x11, "Write long(16)"}, 154 {0x1f, "Notify data transfer device(16)"}, 155}; 156#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr) 157 158static const struct value_name_pair pr_in_arr[] = { 159 {0x0, "Persistent reserve in, read keys"}, 160 {0x1, "Persistent reserve in, read reservation"}, 161 {0x2, "Persistent reserve in, report capabilities"}, 162 {0x3, "Persistent reserve in, read full status"}, 163}; 164#define PR_IN_SZ ARRAY_SIZE(pr_in_arr) 165 166static const struct value_name_pair pr_out_arr[] = { 167 {0x0, "Persistent reserve out, register"}, 168 {0x1, "Persistent reserve out, reserve"}, 169 {0x2, "Persistent reserve out, release"}, 170 {0x3, "Persistent reserve out, clear"}, 171 {0x4, "Persistent reserve out, preempt"}, 172 {0x5, "Persistent reserve out, preempt and abort"}, 173 {0x6, "Persistent reserve out, register and ignore existing key"}, 174 {0x7, "Persistent reserve out, register and move"}, 175}; 176#define PR_OUT_SZ ARRAY_SIZE(pr_out_arr) 177 178/* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out. 179 LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2 180 and SPC-3 */ 181static const struct value_name_pair tpc_out_arr[] = { 182 {0x0, "Extended copy(LID1)"}, 183 {0x1, "Extended copy(LID4)"}, 184 {0x10, "Populate token"}, 185 {0x11, "Write using token"}, 186 {0x1c, "Copy operation abort"}, 187}; 188#define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr) 189 190static const struct value_name_pair tpc_in_arr[] = { 191 {0x0, "Receive copy status(LID1)"}, 192 {0x1, "Receive copy data(LID1)"}, 193 {0x3, "Receive copy operating parameters"}, 194 {0x4, "Receive copy failure details(LID1)"}, 195 {0x5, "Receive copy status(LID4)"}, 196 {0x6, "Receive copy data(LID4)"}, 197 {0x7, "Receive ROD token information"}, 198 {0x8, "Report all ROD tokens"}, 199}; 200#define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr) 201 202 203static const struct value_name_pair variable_length_arr[] = { 204 {0x1, "Rebuild(32)"}, 205 {0x2, "Regenerate(32)"}, 206 {0x3, "Xdread(32)"}, 207 {0x4, "Xdwrite(32)"}, 208 {0x5, "Xdwrite extended(32)"}, 209 {0x6, "Xpwrite(32)"}, 210 {0x7, "Xdwriteread(32)"}, 211 {0x8, "Xdwrite extended(64)"}, 212 {0x9, "Read(32)"}, 213 {0xa, "Verify(32)"}, 214 {0xb, "Write(32)"}, 215 {0xc, "Write an verify(32)"}, 216 {0xd, "Write same(32)"}, 217 {0x8801, "Format OSD"}, 218 {0x8802, "Create (osd)"}, 219 {0x8803, "List (osd)"}, 220 {0x8805, "Read (osd)"}, 221 {0x8806, "Write (osd)"}, 222 {0x8807, "Append (osd)"}, 223 {0x8808, "Flush (osd)"}, 224 {0x880a, "Remove (osd)"}, 225 {0x880b, "Create partition (osd)"}, 226 {0x880c, "Remove partition (osd)"}, 227 {0x880e, "Get attributes (osd)"}, 228 {0x880f, "Set attributes (osd)"}, 229 {0x8812, "Create and write (osd)"}, 230 {0x8815, "Create collection (osd)"}, 231 {0x8816, "Remove collection (osd)"}, 232 {0x8817, "List collection (osd)"}, 233 {0x8818, "Set key (osd)"}, 234 {0x8819, "Set master key (osd)"}, 235 {0x881a, "Flush collection (osd)"}, 236 {0x881b, "Flush partition (osd)"}, 237 {0x881c, "Flush OSD"}, 238 {0x8f7e, "Perform SCSI command (osd)"}, 239 {0x8f7f, "Perform task management function (osd)"}, 240}; 241#define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr) 242 243static struct sa_name_list sa_names_arr[] = { 244 {VARIABLE_LENGTH_CMD, variable_length_arr, VARIABLE_LENGTH_SZ}, 245 {MAINTENANCE_IN, maint_in_arr, MAINT_IN_SZ}, 246 {MAINTENANCE_OUT, maint_out_arr, MAINT_OUT_SZ}, 247 {PERSISTENT_RESERVE_IN, pr_in_arr, PR_IN_SZ}, 248 {PERSISTENT_RESERVE_OUT, pr_out_arr, PR_OUT_SZ}, 249 {SERVICE_ACTION_IN_12, serv_in12_arr, SERV_IN12_SZ}, 250 {SERVICE_ACTION_OUT_12, serv_out12_arr, SERV_OUT12_SZ}, 251 {SERVICE_ACTION_BIDIRECTIONAL, serv_bidi_arr, SERV_BIDI_SZ}, 252 {SERVICE_ACTION_IN_16, serv_in16_arr, SERV_IN16_SZ}, 253 {SERVICE_ACTION_OUT_16, serv_out16_arr, SERV_OUT16_SZ}, 254 {THIRD_PARTY_COPY_IN, tpc_in_arr, TPC_IN_SZ}, 255 {THIRD_PARTY_COPY_OUT, tpc_out_arr, TPC_OUT_SZ}, 256 {0, NULL, 0}, 257}; 258 259bool scsi_opcode_sa_name(int opcode, int service_action, 260 const char **cdb_name, const char **sa_name) 261{ 262 struct sa_name_list *sa_name_ptr; 263 const struct value_name_pair *arr = NULL; 264 int arr_sz, k; 265 266 *cdb_name = NULL; 267 if (opcode >= VENDOR_SPECIFIC_CDB) 268 return false; 269 270 if (opcode < ARRAY_SIZE(cdb_byte0_names)) 271 *cdb_name = cdb_byte0_names[opcode]; 272 273 for (sa_name_ptr = sa_names_arr; sa_name_ptr->arr; ++sa_name_ptr) { 274 if (sa_name_ptr->opcode == opcode) { 275 arr = sa_name_ptr->arr; 276 arr_sz = sa_name_ptr->arr_sz; 277 break; 278 } 279 } 280 if (!arr) 281 return false; 282 283 for (k = 0; k < arr_sz; ++k, ++arr) { 284 if (service_action == arr->value) 285 break; 286 } 287 if (k < arr_sz) 288 *sa_name = arr->name; 289 290 return true; 291} 292 293struct error_info { 294 unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ 295 const char * text; 296}; 297 298/* 299 * The canonical list of T10 Additional Sense Codes is available at: 300 * http://www.t10.org/lists/asc-num.txt [most recent: 20141221] 301 */ 302 303static const struct error_info additional[] = 304{ 305 {0x0000, "No additional sense information"}, 306 {0x0001, "Filemark detected"}, 307 {0x0002, "End-of-partition/medium detected"}, 308 {0x0003, "Setmark detected"}, 309 {0x0004, "Beginning-of-partition/medium detected"}, 310 {0x0005, "End-of-data detected"}, 311 {0x0006, "I/O process terminated"}, 312 {0x0007, "Programmable early warning detected"}, 313 {0x0011, "Audio play operation in progress"}, 314 {0x0012, "Audio play operation paused"}, 315 {0x0013, "Audio play operation successfully completed"}, 316 {0x0014, "Audio play operation stopped due to error"}, 317 {0x0015, "No current audio status to return"}, 318 {0x0016, "Operation in progress"}, 319 {0x0017, "Cleaning requested"}, 320 {0x0018, "Erase operation in progress"}, 321 {0x0019, "Locate operation in progress"}, 322 {0x001A, "Rewind operation in progress"}, 323 {0x001B, "Set capacity operation in progress"}, 324 {0x001C, "Verify operation in progress"}, 325 {0x001D, "ATA pass through information available"}, 326 {0x001E, "Conflicting SA creation request"}, 327 {0x001F, "Logical unit transitioning to another power condition"}, 328 {0x0020, "Extended copy information available"}, 329 {0x0021, "Atomic command aborted due to ACA"}, 330 331 {0x0100, "No index/sector signal"}, 332 333 {0x0200, "No seek complete"}, 334 335 {0x0300, "Peripheral device write fault"}, 336 {0x0301, "No write current"}, 337 {0x0302, "Excessive write errors"}, 338 339 {0x0400, "Logical unit not ready, cause not reportable"}, 340 {0x0401, "Logical unit is in process of becoming ready"}, 341 {0x0402, "Logical unit not ready, initializing command required"}, 342 {0x0403, "Logical unit not ready, manual intervention required"}, 343 {0x0404, "Logical unit not ready, format in progress"}, 344 {0x0405, "Logical unit not ready, rebuild in progress"}, 345 {0x0406, "Logical unit not ready, recalculation in progress"}, 346 {0x0407, "Logical unit not ready, operation in progress"}, 347 {0x0408, "Logical unit not ready, long write in progress"}, 348 {0x0409, "Logical unit not ready, self-test in progress"}, 349 {0x040A, "Logical unit not accessible, asymmetric access state " 350 "transition"}, 351 {0x040B, "Logical unit not accessible, target port in standby state"}, 352 {0x040C, "Logical unit not accessible, target port in unavailable " 353 "state"}, 354 {0x040D, "Logical unit not ready, structure check required"}, 355 {0x040E, "Logical unit not ready, security session in progress"}, 356 {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, 357 {0x0411, "Logical unit not ready, notify (enable spinup) required"}, 358 {0x0412, "Logical unit not ready, offline"}, 359 {0x0413, "Logical unit not ready, SA creation in progress"}, 360 {0x0414, "Logical unit not ready, space allocation in progress"}, 361 {0x0415, "Logical unit not ready, robotics disabled"}, 362 {0x0416, "Logical unit not ready, configuration required"}, 363 {0x0417, "Logical unit not ready, calibration required"}, 364 {0x0418, "Logical unit not ready, a door is open"}, 365 {0x0419, "Logical unit not ready, operating in sequential mode"}, 366 {0x041A, "Logical unit not ready, start stop unit command in " 367 "progress"}, 368 {0x041B, "Logical unit not ready, sanitize in progress"}, 369 {0x041C, "Logical unit not ready, additional power use not yet " 370 "granted"}, 371 {0x041D, "Logical unit not ready, configuration in progress"}, 372 {0x041E, "Logical unit not ready, microcode activation required"}, 373 {0x041F, "Logical unit not ready, microcode download required"}, 374 {0x0420, "Logical unit not ready, logical unit reset required"}, 375 {0x0421, "Logical unit not ready, hard reset required"}, 376 {0x0422, "Logical unit not ready, power cycle required"}, 377 378 {0x0500, "Logical unit does not respond to selection"}, 379 380 {0x0600, "No reference position found"}, 381 382 {0x0700, "Multiple peripheral devices selected"}, 383 384 {0x0800, "Logical unit communication failure"}, 385 {0x0801, "Logical unit communication time-out"}, 386 {0x0802, "Logical unit communication parity error"}, 387 {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, 388 {0x0804, "Unreachable copy target"}, 389 390 {0x0900, "Track following error"}, 391 {0x0901, "Tracking servo failure"}, 392 {0x0902, "Focus servo failure"}, 393 {0x0903, "Spindle servo failure"}, 394 {0x0904, "Head select fault"}, 395 {0x0905, "Vibration induced tracking error"}, 396 397 {0x0A00, "Error log overflow"}, 398 399 {0x0B00, "Warning"}, 400 {0x0B01, "Warning - specified temperature exceeded"}, 401 {0x0B02, "Warning - enclosure degraded"}, 402 {0x0B03, "Warning - background self-test failed"}, 403 {0x0B04, "Warning - background pre-scan detected medium error"}, 404 {0x0B05, "Warning - background medium scan detected medium error"}, 405 {0x0B06, "Warning - non-volatile cache now volatile"}, 406 {0x0B07, "Warning - degraded power to non-volatile cache"}, 407 {0x0B08, "Warning - power loss expected"}, 408 {0x0B09, "Warning - device statistics notification active"}, 409 410 {0x0C00, "Write error"}, 411 {0x0C01, "Write error - recovered with auto reallocation"}, 412 {0x0C02, "Write error - auto reallocation failed"}, 413 {0x0C03, "Write error - recommend reassignment"}, 414 {0x0C04, "Compression check miscompare error"}, 415 {0x0C05, "Data expansion occurred during compression"}, 416 {0x0C06, "Block not compressible"}, 417 {0x0C07, "Write error - recovery needed"}, 418 {0x0C08, "Write error - recovery failed"}, 419 {0x0C09, "Write error - loss of streaming"}, 420 {0x0C0A, "Write error - padding blocks added"}, 421 {0x0C0B, "Auxiliary memory write error"}, 422 {0x0C0C, "Write error - unexpected unsolicited data"}, 423 {0x0C0D, "Write error - not enough unsolicited data"}, 424 {0x0C0E, "Multiple write errors"}, 425 {0x0C0F, "Defects in error window"}, 426 {0x0C10, "Incomplete multiple atomic write operations"}, 427 428 {0x0D00, "Error detected by third party temporary initiator"}, 429 {0x0D01, "Third party device failure"}, 430 {0x0D02, "Copy target device not reachable"}, 431 {0x0D03, "Incorrect copy target device type"}, 432 {0x0D04, "Copy target device data underrun"}, 433 {0x0D05, "Copy target device data overrun"}, 434 435 {0x0E00, "Invalid information unit"}, 436 {0x0E01, "Information unit too short"}, 437 {0x0E02, "Information unit too long"}, 438 {0x0E03, "Invalid field in command information unit"}, 439 440 {0x1000, "Id CRC or ECC error"}, 441 {0x1001, "Logical block guard check failed"}, 442 {0x1002, "Logical block application tag check failed"}, 443 {0x1003, "Logical block reference tag check failed"}, 444 {0x1004, "Logical block protection error on recover buffered data"}, 445 {0x1005, "Logical block protection method error"}, 446 447 {0x1100, "Unrecovered read error"}, 448 {0x1101, "Read retries exhausted"}, 449 {0x1102, "Error too long to correct"}, 450 {0x1103, "Multiple read errors"}, 451 {0x1104, "Unrecovered read error - auto reallocate failed"}, 452 {0x1105, "L-EC uncorrectable error"}, 453 {0x1106, "CIRC unrecovered error"}, 454 {0x1107, "Data re-synchronization error"}, 455 {0x1108, "Incomplete block read"}, 456 {0x1109, "No gap found"}, 457 {0x110A, "Miscorrected error"}, 458 {0x110B, "Unrecovered read error - recommend reassignment"}, 459 {0x110C, "Unrecovered read error - recommend rewrite the data"}, 460 {0x110D, "De-compression CRC error"}, 461 {0x110E, "Cannot decompress using declared algorithm"}, 462 {0x110F, "Error reading UPC/EAN number"}, 463 {0x1110, "Error reading ISRC number"}, 464 {0x1111, "Read error - loss of streaming"}, 465 {0x1112, "Auxiliary memory read error"}, 466 {0x1113, "Read error - failed retransmission request"}, 467 {0x1114, "Read error - lba marked bad by application client"}, 468 {0x1115, "Write after sanitize required"}, 469 470 {0x1200, "Address mark not found for id field"}, 471 472 {0x1300, "Address mark not found for data field"}, 473 474 {0x1400, "Recorded entity not found"}, 475 {0x1401, "Record not found"}, 476 {0x1402, "Filemark or setmark not found"}, 477 {0x1403, "End-of-data not found"}, 478 {0x1404, "Block sequence error"}, 479 {0x1405, "Record not found - recommend reassignment"}, 480 {0x1406, "Record not found - data auto-reallocated"}, 481 {0x1407, "Locate operation failure"}, 482 483 {0x1500, "Random positioning error"}, 484 {0x1501, "Mechanical positioning error"}, 485 {0x1502, "Positioning error detected by read of medium"}, 486 487 {0x1600, "Data synchronization mark error"}, 488 {0x1601, "Data sync error - data rewritten"}, 489 {0x1602, "Data sync error - recommend rewrite"}, 490 {0x1603, "Data sync error - data auto-reallocated"}, 491 {0x1604, "Data sync error - recommend reassignment"}, 492 493 {0x1700, "Recovered data with no error correction applied"}, 494 {0x1701, "Recovered data with retries"}, 495 {0x1702, "Recovered data with positive head offset"}, 496 {0x1703, "Recovered data with negative head offset"}, 497 {0x1704, "Recovered data with retries and/or circ applied"}, 498 {0x1705, "Recovered data using previous sector id"}, 499 {0x1706, "Recovered data without ECC - data auto-reallocated"}, 500 {0x1707, "Recovered data without ECC - recommend reassignment"}, 501 {0x1708, "Recovered data without ECC - recommend rewrite"}, 502 {0x1709, "Recovered data without ECC - data rewritten"}, 503 504 {0x1800, "Recovered data with error correction applied"}, 505 {0x1801, "Recovered data with error corr. & retries applied"}, 506 {0x1802, "Recovered data - data auto-reallocated"}, 507 {0x1803, "Recovered data with CIRC"}, 508 {0x1804, "Recovered data with L-EC"}, 509 {0x1805, "Recovered data - recommend reassignment"}, 510 {0x1806, "Recovered data - recommend rewrite"}, 511 {0x1807, "Recovered data with ECC - data rewritten"}, 512 {0x1808, "Recovered data with linking"}, 513 514 {0x1900, "Defect list error"}, 515 {0x1901, "Defect list not available"}, 516 {0x1902, "Defect list error in primary list"}, 517 {0x1903, "Defect list error in grown list"}, 518 519 {0x1A00, "Parameter list length error"}, 520 521 {0x1B00, "Synchronous data transfer error"}, 522 523 {0x1C00, "Defect list not found"}, 524 {0x1C01, "Primary defect list not found"}, 525 {0x1C02, "Grown defect list not found"}, 526 527 {0x1D00, "Miscompare during verify operation"}, 528 {0x1D01, "Miscompare verify of unmapped LBA"}, 529 530 {0x1E00, "Recovered id with ECC correction"}, 531 532 {0x1F00, "Partial defect list transfer"}, 533 534 {0x2000, "Invalid command operation code"}, 535 {0x2001, "Access denied - initiator pending-enrolled"}, 536 {0x2002, "Access denied - no access rights"}, 537 {0x2003, "Access denied - invalid mgmt id key"}, 538 {0x2004, "Illegal command while in write capable state"}, 539 {0x2005, "Obsolete"}, 540 {0x2006, "Illegal command while in explicit address mode"}, 541 {0x2007, "Illegal command while in implicit address mode"}, 542 {0x2008, "Access denied - enrollment conflict"}, 543 {0x2009, "Access denied - invalid LU identifier"}, 544 {0x200A, "Access denied - invalid proxy token"}, 545 {0x200B, "Access denied - ACL LUN conflict"}, 546 {0x200C, "Illegal command when not in append-only mode"}, 547 548 {0x2100, "Logical block address out of range"}, 549 {0x2101, "Invalid element address"}, 550 {0x2102, "Invalid address for write"}, 551 {0x2103, "Invalid write crossing layer jump"}, 552 {0x2104, "Unaligned write command"}, 553 {0x2105, "Write boundary violation"}, 554 {0x2106, "Attempt to read invalid data"}, 555 {0x2107, "Read boundary violation"}, 556 557 {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, 558 559 {0x2300, "Invalid token operation, cause not reportable"}, 560 {0x2301, "Invalid token operation, unsupported token type"}, 561 {0x2302, "Invalid token operation, remote token usage not supported"}, 562 {0x2303, "Invalid token operation, remote rod token creation not " 563 "supported"}, 564 {0x2304, "Invalid token operation, token unknown"}, 565 {0x2305, "Invalid token operation, token corrupt"}, 566 {0x2306, "Invalid token operation, token revoked"}, 567 {0x2307, "Invalid token operation, token expired"}, 568 {0x2308, "Invalid token operation, token cancelled"}, 569 {0x2309, "Invalid token operation, token deleted"}, 570 {0x230A, "Invalid token operation, invalid token length"}, 571 572 {0x2400, "Invalid field in cdb"}, 573 {0x2401, "CDB decryption error"}, 574 {0x2402, "Obsolete"}, 575 {0x2403, "Obsolete"}, 576 {0x2404, "Security audit value frozen"}, 577 {0x2405, "Security working key frozen"}, 578 {0x2406, "Nonce not unique"}, 579 {0x2407, "Nonce timestamp out of range"}, 580 {0x2408, "Invalid XCDB"}, 581 582 {0x2500, "Logical unit not supported"}, 583 584 {0x2600, "Invalid field in parameter list"}, 585 {0x2601, "Parameter not supported"}, 586 {0x2602, "Parameter value invalid"}, 587 {0x2603, "Threshold parameters not supported"}, 588 {0x2604, "Invalid release of persistent reservation"}, 589 {0x2605, "Data decryption error"}, 590 {0x2606, "Too many target descriptors"}, 591 {0x2607, "Unsupported target descriptor type code"}, 592 {0x2608, "Too many segment descriptors"}, 593 {0x2609, "Unsupported segment descriptor type code"}, 594 {0x260A, "Unexpected inexact segment"}, 595 {0x260B, "Inline data length exceeded"}, 596 {0x260C, "Invalid operation for copy source or destination"}, 597 {0x260D, "Copy segment granularity violation"}, 598 {0x260E, "Invalid parameter while port is enabled"}, 599 {0x260F, "Invalid data-out buffer integrity check value"}, 600 {0x2610, "Data decryption key fail limit reached"}, 601 {0x2611, "Incomplete key-associated data set"}, 602 {0x2612, "Vendor specific key reference not found"}, 603 604 {0x2700, "Write protected"}, 605 {0x2701, "Hardware write protected"}, 606 {0x2702, "Logical unit software write protected"}, 607 {0x2703, "Associated write protect"}, 608 {0x2704, "Persistent write protect"}, 609 {0x2705, "Permanent write protect"}, 610 {0x2706, "Conditional write protect"}, 611 {0x2707, "Space allocation failed write protect"}, 612 {0x2708, "Zone is read only"}, 613 614 {0x2800, "Not ready to ready change, medium may have changed"}, 615 {0x2801, "Import or export element accessed"}, 616 {0x2802, "Format-layer may have changed"}, 617 {0x2803, "Import/export element accessed, medium changed"}, 618 619 {0x2900, "Power on, reset, or bus device reset occurred"}, 620 {0x2901, "Power on occurred"}, 621 {0x2902, "Scsi bus reset occurred"}, 622 {0x2903, "Bus device reset function occurred"}, 623 {0x2904, "Device internal reset"}, 624 {0x2905, "Transceiver mode changed to single-ended"}, 625 {0x2906, "Transceiver mode changed to lvd"}, 626 {0x2907, "I_T nexus loss occurred"}, 627 628 {0x2A00, "Parameters changed"}, 629 {0x2A01, "Mode parameters changed"}, 630 {0x2A02, "Log parameters changed"}, 631 {0x2A03, "Reservations preempted"}, 632 {0x2A04, "Reservations released"}, 633 {0x2A05, "Registrations preempted"}, 634 {0x2A06, "Asymmetric access state changed"}, 635 {0x2A07, "Implicit asymmetric access state transition failed"}, 636 {0x2A08, "Priority changed"}, 637 {0x2A09, "Capacity data has changed"}, 638 {0x2A0A, "Error history I_T nexus cleared"}, 639 {0x2A0B, "Error history snapshot released"}, 640 {0x2A0C, "Error recovery attributes have changed"}, 641 {0x2A0D, "Data encryption capabilities changed"}, 642 {0x2A10, "Timestamp changed"}, 643 {0x2A11, "Data encryption parameters changed by another i_t nexus"}, 644 {0x2A12, "Data encryption parameters changed by vendor specific " 645 "event"}, 646 {0x2A13, "Data encryption key instance counter has changed"}, 647 {0x2A14, "SA creation capabilities data has changed"}, 648 {0x2A15, "Medium removal prevention preempted"}, 649 650 {0x2B00, "Copy cannot execute since host cannot disconnect"}, 651 652 {0x2C00, "Command sequence error"}, 653 {0x2C01, "Too many windows specified"}, 654 {0x2C02, "Invalid combination of windows specified"}, 655 {0x2C03, "Current program area is not empty"}, 656 {0x2C04, "Current program area is empty"}, 657 {0x2C05, "Illegal power condition request"}, 658 {0x2C06, "Persistent prevent conflict"}, 659 {0x2C07, "Previous busy status"}, 660 {0x2C08, "Previous task set full status"}, 661 {0x2C09, "Previous reservation conflict status"}, 662 {0x2C0A, "Partition or collection contains user objects"}, 663 {0x2C0B, "Not reserved"}, 664 {0x2C0C, "Orwrite generation does not match"}, 665 {0x2C0D, "Reset write pointer not allowed"}, 666 {0x2C0E, "Zone is offline"}, 667 668 {0x2D00, "Overwrite error on update in place"}, 669 670 {0x2E00, "Insufficient time for operation"}, 671 {0x2E01, "Command timeout before processing"}, 672 {0x2E02, "Command timeout during processing"}, 673 {0x2E03, "Command timeout during processing due to error recovery"}, 674 675 {0x2F00, "Commands cleared by another initiator"}, 676 {0x2F01, "Commands cleared by power loss notification"}, 677 {0x2F02, "Commands cleared by device server"}, 678 {0x2F03, "Some commands cleared by queuing layer event"}, 679 680 {0x3000, "Incompatible medium installed"}, 681 {0x3001, "Cannot read medium - unknown format"}, 682 {0x3002, "Cannot read medium - incompatible format"}, 683 {0x3003, "Cleaning cartridge installed"}, 684 {0x3004, "Cannot write medium - unknown format"}, 685 {0x3005, "Cannot write medium - incompatible format"}, 686 {0x3006, "Cannot format medium - incompatible medium"}, 687 {0x3007, "Cleaning failure"}, 688 {0x3008, "Cannot write - application code mismatch"}, 689 {0x3009, "Current session not fixated for append"}, 690 {0x300A, "Cleaning request rejected"}, 691 {0x300C, "WORM medium - overwrite attempted"}, 692 {0x300D, "WORM medium - integrity check"}, 693 {0x3010, "Medium not formatted"}, 694 {0x3011, "Incompatible volume type"}, 695 {0x3012, "Incompatible volume qualifier"}, 696 {0x3013, "Cleaning volume expired"}, 697 698 {0x3100, "Medium format corrupted"}, 699 {0x3101, "Format command failed"}, 700 {0x3102, "Zoned formatting failed due to spare linking"}, 701 {0x3103, "Sanitize command failed"}, 702 703 {0x3200, "No defect spare location available"}, 704 {0x3201, "Defect list update failure"}, 705 706 {0x3300, "Tape length error"}, 707 708 {0x3400, "Enclosure failure"}, 709 710 {0x3500, "Enclosure services failure"}, 711 {0x3501, "Unsupported enclosure function"}, 712 {0x3502, "Enclosure services unavailable"}, 713 {0x3503, "Enclosure services transfer failure"}, 714 {0x3504, "Enclosure services transfer refused"}, 715 {0x3505, "Enclosure services checksum error"}, 716 717 {0x3600, "Ribbon, ink, or toner failure"}, 718 719 {0x3700, "Rounded parameter"}, 720 721 {0x3800, "Event status notification"}, 722 {0x3802, "Esn - power management class event"}, 723 {0x3804, "Esn - media class event"}, 724 {0x3806, "Esn - device busy class event"}, 725 {0x3807, "Thin Provisioning soft threshold reached"}, 726 727 {0x3900, "Saving parameters not supported"}, 728 729 {0x3A00, "Medium not present"}, 730 {0x3A01, "Medium not present - tray closed"}, 731 {0x3A02, "Medium not present - tray open"}, 732 {0x3A03, "Medium not present - loadable"}, 733 {0x3A04, "Medium not present - medium auxiliary memory accessible"}, 734 735 {0x3B00, "Sequential positioning error"}, 736 {0x3B01, "Tape position error at beginning-of-medium"}, 737 {0x3B02, "Tape position error at end-of-medium"}, 738 {0x3B03, "Tape or electronic vertical forms unit not ready"}, 739 {0x3B04, "Slew failure"}, 740 {0x3B05, "Paper jam"}, 741 {0x3B06, "Failed to sense top-of-form"}, 742 {0x3B07, "Failed to sense bottom-of-form"}, 743 {0x3B08, "Reposition error"}, 744 {0x3B09, "Read past end of medium"}, 745 {0x3B0A, "Read past beginning of medium"}, 746 {0x3B0B, "Position past end of medium"}, 747 {0x3B0C, "Position past beginning of medium"}, 748 {0x3B0D, "Medium destination element full"}, 749 {0x3B0E, "Medium source element empty"}, 750 {0x3B0F, "End of medium reached"}, 751 {0x3B11, "Medium magazine not accessible"}, 752 {0x3B12, "Medium magazine removed"}, 753 {0x3B13, "Medium magazine inserted"}, 754 {0x3B14, "Medium magazine locked"}, 755 {0x3B15, "Medium magazine unlocked"}, 756 {0x3B16, "Mechanical positioning or changer error"}, 757 {0x3B17, "Read past end of user object"}, 758 {0x3B18, "Element disabled"}, 759 {0x3B19, "Element enabled"}, 760 {0x3B1A, "Data transfer device removed"}, 761 {0x3B1B, "Data transfer device inserted"}, 762 {0x3B1C, "Too many logical objects on partition to support " 763 "operation"}, 764 765 {0x3D00, "Invalid bits in identify message"}, 766 767 {0x3E00, "Logical unit has not self-configured yet"}, 768 {0x3E01, "Logical unit failure"}, 769 {0x3E02, "Timeout on logical unit"}, 770 {0x3E03, "Logical unit failed self-test"}, 771 {0x3E04, "Logical unit unable to update self-test log"}, 772 773 {0x3F00, "Target operating conditions have changed"}, 774 {0x3F01, "Microcode has been changed"}, 775 {0x3F02, "Changed operating definition"}, 776 {0x3F03, "Inquiry data has changed"}, 777 {0x3F04, "Component device attached"}, 778 {0x3F05, "Device identifier changed"}, 779 {0x3F06, "Redundancy group created or modified"}, 780 {0x3F07, "Redundancy group deleted"}, 781 {0x3F08, "Spare created or modified"}, 782 {0x3F09, "Spare deleted"}, 783 {0x3F0A, "Volume set created or modified"}, 784 {0x3F0B, "Volume set deleted"}, 785 {0x3F0C, "Volume set deassigned"}, 786 {0x3F0D, "Volume set reassigned"}, 787 {0x3F0E, "Reported luns data has changed"}, 788 {0x3F0F, "Echo buffer overwritten"}, 789 {0x3F10, "Medium loadable"}, 790 {0x3F11, "Medium auxiliary memory accessible"}, 791 {0x3F12, "iSCSI IP address added"}, 792 {0x3F13, "iSCSI IP address removed"}, 793 {0x3F14, "iSCSI IP address changed"}, 794 {0x3F15, "Inspect referrals sense descriptors"}, 795 {0x3F16, "Microcode has been changed without reset"}, 796/* 797 * {0x40NN, "Ram failure"}, 798 * {0x40NN, "Diagnostic failure on component nn"}, 799 * {0x41NN, "Data path failure"}, 800 * {0x42NN, "Power-on or self-test failure"}, 801 */ 802 {0x4300, "Message error"}, 803 804 {0x4400, "Internal target failure"}, 805 {0x4401, "Persistent reservation information lost"}, 806 {0x4471, "ATA device failed set features"}, 807 808 {0x4500, "Select or reselect failure"}, 809 810 {0x4600, "Unsuccessful soft reset"}, 811 812 {0x4700, "Scsi parity error"}, 813 {0x4701, "Data phase CRC error detected"}, 814 {0x4702, "Scsi parity error detected during st data phase"}, 815 {0x4703, "Information unit iuCRC error detected"}, 816 {0x4704, "Asynchronous information protection error detected"}, 817 {0x4705, "Protocol service CRC error"}, 818 {0x4706, "Phy test function in progress"}, 819 {0x477f, "Some commands cleared by iSCSI Protocol event"}, 820 821 {0x4800, "Initiator detected error message received"}, 822 823 {0x4900, "Invalid message error"}, 824 825 {0x4A00, "Command phase error"}, 826 827 {0x4B00, "Data phase error"}, 828 {0x4B01, "Invalid target port transfer tag received"}, 829 {0x4B02, "Too much write data"}, 830 {0x4B03, "Ack/nak timeout"}, 831 {0x4B04, "Nak received"}, 832 {0x4B05, "Data offset error"}, 833 {0x4B06, "Initiator response timeout"}, 834 {0x4B07, "Connection lost"}, 835 {0x4B08, "Data-in buffer overflow - data buffer size"}, 836 {0x4B09, "Data-in buffer overflow - data buffer descriptor area"}, 837 {0x4B0A, "Data-in buffer error"}, 838 {0x4B0B, "Data-out buffer overflow - data buffer size"}, 839 {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"}, 840 {0x4B0D, "Data-out buffer error"}, 841 {0x4B0E, "PCIe fabric error"}, 842 {0x4B0F, "PCIe completion timeout"}, 843 {0x4B10, "PCIe completer abort"}, 844 {0x4B11, "PCIe poisoned tlp received"}, 845 {0x4B12, "PCIe eCRC check failed"}, 846 {0x4B13, "PCIe unsupported request"}, 847 {0x4B14, "PCIe acs violation"}, 848 {0x4B15, "PCIe tlp prefix blocked"}, 849 850 {0x4C00, "Logical unit failed self-configuration"}, 851/* 852 * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, 853 */ 854 {0x4E00, "Overlapped commands attempted"}, 855 856 {0x5000, "Write append error"}, 857 {0x5001, "Write append position error"}, 858 {0x5002, "Position error related to timing"}, 859 860 {0x5100, "Erase failure"}, 861 {0x5101, "Erase failure - incomplete erase operation detected"}, 862 863 {0x5200, "Cartridge fault"}, 864 865 {0x5300, "Media load or eject failed"}, 866 {0x5301, "Unload tape failure"}, 867 {0x5302, "Medium removal prevented"}, 868 {0x5303, "Medium removal prevented by data transfer element"}, 869 {0x5304, "Medium thread or unthread failure"}, 870 {0x5305, "Volume identifier invalid"}, 871 {0x5306, "Volume identifier missing"}, 872 {0x5307, "Duplicate volume identifier"}, 873 {0x5308, "Element status unknown"}, 874 {0x5309, "Data transfer device error - load failed"}, 875 {0x530a, "Data transfer device error - unload failed"}, 876 {0x530b, "Data transfer device error - unload missing"}, 877 {0x530c, "Data transfer device error - eject failed"}, 878 {0x530d, "Data transfer device error - library communication failed"}, 879 880 {0x5400, "Scsi to host system interface failure"}, 881 882 {0x5500, "System resource failure"}, 883 {0x5501, "System buffer full"}, 884 {0x5502, "Insufficient reservation resources"}, 885 {0x5503, "Insufficient resources"}, 886 {0x5504, "Insufficient registration resources"}, 887 {0x5505, "Insufficient access control resources"}, 888 {0x5506, "Auxiliary memory out of space"}, 889 {0x5507, "Quota error"}, 890 {0x5508, "Maximum number of supplemental decryption keys exceeded"}, 891 {0x5509, "Medium auxiliary memory not accessible"}, 892 {0x550A, "Data currently unavailable"}, 893 {0x550B, "Insufficient power for operation"}, 894 {0x550C, "Insufficient resources to create rod"}, 895 {0x550D, "Insufficient resources to create rod token"}, 896 {0x550E, "Insufficient zone resources"}, 897 898 {0x5700, "Unable to recover table-of-contents"}, 899 900 {0x5800, "Generation does not exist"}, 901 902 {0x5900, "Updated block read"}, 903 904 {0x5A00, "Operator request or state change input"}, 905 {0x5A01, "Operator medium removal request"}, 906 {0x5A02, "Operator selected write protect"}, 907 {0x5A03, "Operator selected write permit"}, 908 909 {0x5B00, "Log exception"}, 910 {0x5B01, "Threshold condition met"}, 911 {0x5B02, "Log counter at maximum"}, 912 {0x5B03, "Log list codes exhausted"}, 913 914 {0x5C00, "Rpl status change"}, 915 {0x5C01, "Spindles synchronized"}, 916 {0x5C02, "Spindles not synchronized"}, 917 918 {0x5D00, "Failure prediction threshold exceeded"}, 919 {0x5D01, "Media failure prediction threshold exceeded"}, 920 {0x5D02, "Logical unit failure prediction threshold exceeded"}, 921 {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, 922 {0x5D10, "Hardware impending failure general hard drive failure"}, 923 {0x5D11, "Hardware impending failure drive error rate too high"}, 924 {0x5D12, "Hardware impending failure data error rate too high"}, 925 {0x5D13, "Hardware impending failure seek error rate too high"}, 926 {0x5D14, "Hardware impending failure too many block reassigns"}, 927 {0x5D15, "Hardware impending failure access times too high"}, 928 {0x5D16, "Hardware impending failure start unit times too high"}, 929 {0x5D17, "Hardware impending failure channel parametrics"}, 930 {0x5D18, "Hardware impending failure controller detected"}, 931 {0x5D19, "Hardware impending failure throughput performance"}, 932 {0x5D1A, "Hardware impending failure seek time performance"}, 933 {0x5D1B, "Hardware impending failure spin-up retry count"}, 934 {0x5D1C, "Hardware impending failure drive calibration retry count"}, 935 {0x5D20, "Controller impending failure general hard drive failure"}, 936 {0x5D21, "Controller impending failure drive error rate too high"}, 937 {0x5D22, "Controller impending failure data error rate too high"}, 938 {0x5D23, "Controller impending failure seek error rate too high"}, 939 {0x5D24, "Controller impending failure too many block reassigns"}, 940 {0x5D25, "Controller impending failure access times too high"}, 941 {0x5D26, "Controller impending failure start unit times too high"}, 942 {0x5D27, "Controller impending failure channel parametrics"}, 943 {0x5D28, "Controller impending failure controller detected"}, 944 {0x5D29, "Controller impending failure throughput performance"}, 945 {0x5D2A, "Controller impending failure seek time performance"}, 946 {0x5D2B, "Controller impending failure spin-up retry count"}, 947 {0x5D2C, "Controller impending failure drive calibration retry count"}, 948 {0x5D30, "Data channel impending failure general hard drive failure"}, 949 {0x5D31, "Data channel impending failure drive error rate too high"}, 950 {0x5D32, "Data channel impending failure data error rate too high"}, 951 {0x5D33, "Data channel impending failure seek error rate too high"}, 952 {0x5D34, "Data channel impending failure too many block reassigns"}, 953 {0x5D35, "Data channel impending failure access times too high"}, 954 {0x5D36, "Data channel impending failure start unit times too high"}, 955 {0x5D37, "Data channel impending failure channel parametrics"}, 956 {0x5D38, "Data channel impending failure controller detected"}, 957 {0x5D39, "Data channel impending failure throughput performance"}, 958 {0x5D3A, "Data channel impending failure seek time performance"}, 959 {0x5D3B, "Data channel impending failure spin-up retry count"}, 960 {0x5D3C, "Data channel impending failure drive calibration retry " 961 "count"}, 962 {0x5D40, "Servo impending failure general hard drive failure"}, 963 {0x5D41, "Servo impending failure drive error rate too high"}, 964 {0x5D42, "Servo impending failure data error rate too high"}, 965 {0x5D43, "Servo impending failure seek error rate too high"}, 966 {0x5D44, "Servo impending failure too many block reassigns"}, 967 {0x5D45, "Servo impending failure access times too high"}, 968 {0x5D46, "Servo impending failure start unit times too high"}, 969 {0x5D47, "Servo impending failure channel parametrics"}, 970 {0x5D48, "Servo impending failure controller detected"}, 971 {0x5D49, "Servo impending failure throughput performance"}, 972 {0x5D4A, "Servo impending failure seek time performance"}, 973 {0x5D4B, "Servo impending failure spin-up retry count"}, 974 {0x5D4C, "Servo impending failure drive calibration retry count"}, 975 {0x5D50, "Spindle impending failure general hard drive failure"}, 976 {0x5D51, "Spindle impending failure drive error rate too high"}, 977 {0x5D52, "Spindle impending failure data error rate too high"}, 978 {0x5D53, "Spindle impending failure seek error rate too high"}, 979 {0x5D54, "Spindle impending failure too many block reassigns"}, 980 {0x5D55, "Spindle impending failure access times too high"}, 981 {0x5D56, "Spindle impending failure start unit times too high"}, 982 {0x5D57, "Spindle impending failure channel parametrics"}, 983 {0x5D58, "Spindle impending failure controller detected"}, 984 {0x5D59, "Spindle impending failure throughput performance"}, 985 {0x5D5A, "Spindle impending failure seek time performance"}, 986 {0x5D5B, "Spindle impending failure spin-up retry count"}, 987 {0x5D5C, "Spindle impending failure drive calibration retry count"}, 988 {0x5D60, "Firmware impending failure general hard drive failure"}, 989 {0x5D61, "Firmware impending failure drive error rate too high"}, 990 {0x5D62, "Firmware impending failure data error rate too high"}, 991 {0x5D63, "Firmware impending failure seek error rate too high"}, 992 {0x5D64, "Firmware impending failure too many block reassigns"}, 993 {0x5D65, "Firmware impending failure access times too high"}, 994 {0x5D66, "Firmware impending failure start unit times too high"}, 995 {0x5D67, "Firmware impending failure channel parametrics"}, 996 {0x5D68, "Firmware impending failure controller detected"}, 997 {0x5D69, "Firmware impending failure throughput performance"}, 998 {0x5D6A, "Firmware impending failure seek time performance"}, 999 {0x5D6B, "Firmware impending failure spin-up retry count"}, 1000 {0x5D6C, "Firmware impending failure drive calibration retry count"}, 1001 {0x5DFF, "Failure prediction threshold exceeded (false)"}, 1002 1003 {0x5E00, "Low power condition on"}, 1004 {0x5E01, "Idle condition activated by timer"}, 1005 {0x5E02, "Standby condition activated by timer"}, 1006 {0x5E03, "Idle condition activated by command"}, 1007 {0x5E04, "Standby condition activated by command"}, 1008 {0x5E05, "Idle_b condition activated by timer"}, 1009 {0x5E06, "Idle_b condition activated by command"}, 1010 {0x5E07, "Idle_c condition activated by timer"}, 1011 {0x5E08, "Idle_c condition activated by command"}, 1012 {0x5E09, "Standby_y condition activated by timer"}, 1013 {0x5E0A, "Standby_y condition activated by command"}, 1014 {0x5E41, "Power state change to active"}, 1015 {0x5E42, "Power state change to idle"}, 1016 {0x5E43, "Power state change to standby"}, 1017 {0x5E45, "Power state change to sleep"}, 1018 {0x5E47, "Power state change to device control"}, 1019 1020 {0x6000, "Lamp failure"}, 1021 1022 {0x6100, "Video acquisition error"}, 1023 {0x6101, "Unable to acquire video"}, 1024 {0x6102, "Out of focus"}, 1025 1026 {0x6200, "Scan head positioning error"}, 1027 1028 {0x6300, "End of user area encountered on this track"}, 1029 {0x6301, "Packet does not fit in available space"}, 1030 1031 {0x6400, "Illegal mode for this track"}, 1032 {0x6401, "Invalid packet size"}, 1033 1034 {0x6500, "Voltage fault"}, 1035 1036 {0x6600, "Automatic document feeder cover up"}, 1037 {0x6601, "Automatic document feeder lift up"}, 1038 {0x6602, "Document jam in automatic document feeder"}, 1039 {0x6603, "Document miss feed automatic in document feeder"}, 1040 1041 {0x6700, "Configuration failure"}, 1042 {0x6701, "Configuration of incapable logical units failed"}, 1043 {0x6702, "Add logical unit failed"}, 1044 {0x6703, "Modification of logical unit failed"}, 1045 {0x6704, "Exchange of logical unit failed"}, 1046 {0x6705, "Remove of logical unit failed"}, 1047 {0x6706, "Attachment of logical unit failed"}, 1048 {0x6707, "Creation of logical unit failed"}, 1049 {0x6708, "Assign failure occurred"}, 1050 {0x6709, "Multiply assigned logical unit"}, 1051 {0x670A, "Set target port groups command failed"}, 1052 {0x670B, "ATA device feature not enabled"}, 1053 1054 {0x6800, "Logical unit not configured"}, 1055 {0x6801, "Subsidiary logical unit not configured"}, 1056 1057 {0x6900, "Data loss on logical unit"}, 1058 {0x6901, "Multiple logical unit failures"}, 1059 {0x6902, "Parity/data mismatch"}, 1060 1061 {0x6A00, "Informational, refer to log"}, 1062 1063 {0x6B00, "State change has occurred"}, 1064 {0x6B01, "Redundancy level got better"}, 1065 {0x6B02, "Redundancy level got worse"}, 1066 1067 {0x6C00, "Rebuild failure occurred"}, 1068 1069 {0x6D00, "Recalculate failure occurred"}, 1070 1071 {0x6E00, "Command to logical unit failed"}, 1072 1073 {0x6F00, "Copy protection key exchange failure - authentication " 1074 "failure"}, 1075 {0x6F01, "Copy protection key exchange failure - key not present"}, 1076 {0x6F02, "Copy protection key exchange failure - key not established"}, 1077 {0x6F03, "Read of scrambled sector without authentication"}, 1078 {0x6F04, "Media region code is mismatched to logical unit region"}, 1079 {0x6F05, "Drive region must be permanent/region reset count error"}, 1080 {0x6F06, "Insufficient block count for binding nonce recording"}, 1081 {0x6F07, "Conflict in binding nonce recording"}, 1082/* 1083 * {0x70NN, "Decompression exception short algorithm id of nn"}, 1084 */ 1085 {0x7100, "Decompression exception long algorithm id"}, 1086 1087 {0x7200, "Session fixation error"}, 1088 {0x7201, "Session fixation error writing lead-in"}, 1089 {0x7202, "Session fixation error writing lead-out"}, 1090 {0x7203, "Session fixation error - incomplete track in session"}, 1091 {0x7204, "Empty or partially written reserved track"}, 1092 {0x7205, "No more track reservations allowed"}, 1093 {0x7206, "RMZ extension is not allowed"}, 1094 {0x7207, "No more test zone extensions are allowed"}, 1095 1096 {0x7300, "Cd control error"}, 1097 {0x7301, "Power calibration area almost full"}, 1098 {0x7302, "Power calibration area is full"}, 1099 {0x7303, "Power calibration area error"}, 1100 {0x7304, "Program memory area update failure"}, 1101 {0x7305, "Program memory area is full"}, 1102 {0x7306, "RMA/PMA is almost full"}, 1103 {0x7310, "Current power calibration area almost full"}, 1104 {0x7311, "Current power calibration area is full"}, 1105 {0x7317, "RDZ is full"}, 1106 1107 {0x7400, "Security error"}, 1108 {0x7401, "Unable to decrypt data"}, 1109 {0x7402, "Unencrypted data encountered while decrypting"}, 1110 {0x7403, "Incorrect data encryption key"}, 1111 {0x7404, "Cryptographic integrity validation failed"}, 1112 {0x7405, "Error decrypting data"}, 1113 {0x7406, "Unknown signature verification key"}, 1114 {0x7407, "Encryption parameters not useable"}, 1115 {0x7408, "Digital signature validation failure"}, 1116 {0x7409, "Encryption mode mismatch on read"}, 1117 {0x740A, "Encrypted block not raw read enabled"}, 1118 {0x740B, "Incorrect Encryption parameters"}, 1119 {0x740C, "Unable to decrypt parameter list"}, 1120 {0x740D, "Encryption algorithm disabled"}, 1121 {0x7410, "SA creation parameter value invalid"}, 1122 {0x7411, "SA creation parameter value rejected"}, 1123 {0x7412, "Invalid SA usage"}, 1124 {0x7421, "Data Encryption configuration prevented"}, 1125 {0x7430, "SA creation parameter not supported"}, 1126 {0x7440, "Authentication failed"}, 1127 {0x7461, "External data encryption key manager access error"}, 1128 {0x7462, "External data encryption key manager error"}, 1129 {0x7463, "External data encryption key not found"}, 1130 {0x7464, "External data encryption request not authorized"}, 1131 {0x746E, "External data encryption control timeout"}, 1132 {0x746F, "External data encryption control error"}, 1133 {0x7471, "Logical unit access not authorized"}, 1134 {0x7479, "Security conflict in translated device"}, 1135 1136 {0, NULL} 1137}; 1138 1139struct error_info2 { 1140 unsigned char code1, code2_min, code2_max; 1141 const char * str; 1142 const char * fmt; 1143}; 1144 1145static const struct error_info2 additional2[] = 1146{ 1147 {0x40, 0x00, 0x7f, "Ram failure", ""}, 1148 {0x40, 0x80, 0xff, "Diagnostic failure on component", ""}, 1149 {0x41, 0x00, 0xff, "Data path failure", ""}, 1150 {0x42, 0x00, 0xff, "Power-on or self-test failure", ""}, 1151 {0x4D, 0x00, 0xff, "Tagged overlapped commands", "task tag "}, 1152 {0x70, 0x00, 0xff, "Decompression exception", "short algorithm id of "}, 1153 {0, 0, 0, NULL, NULL} 1154}; 1155 1156/* description of the sense key values */ 1157static const char * const snstext[] = { 1158 "No Sense", /* 0: There is no sense information */ 1159 "Recovered Error", /* 1: The last command completed successfully 1160 but used error correction */ 1161 "Not Ready", /* 2: The addressed target is not ready */ 1162 "Medium Error", /* 3: Data error detected on the medium */ 1163 "Hardware Error", /* 4: Controller or device failure */ 1164 "Illegal Request", /* 5: Error in request */ 1165 "Unit Attention", /* 6: Removable medium was changed, or 1166 the target has been reset, or ... */ 1167 "Data Protect", /* 7: Access to the data is blocked */ 1168 "Blank Check", /* 8: Reached unexpected written or unwritten 1169 region of the medium */ 1170 "Vendor Specific(9)", 1171 "Copy Aborted", /* A: COPY or COMPARE was aborted */ 1172 "Aborted Command", /* B: The target aborted the command */ 1173 "Equal", /* C: A SEARCH DATA command found data equal, 1174 reserved in SPC-4 rev 36 */ 1175 "Volume Overflow", /* D: Medium full with still data to be written */ 1176 "Miscompare", /* E: Source data and data on the medium 1177 do not agree */ 1178 "Completed", /* F: command completed sense data reported, 1179 may occur for successful command */ 1180}; 1181 1182/* Get sense key string or NULL if not available */ 1183const char * 1184scsi_sense_key_string(unsigned char key) { 1185 if (key <= 0xE) 1186 return snstext[key]; 1187 return NULL; 1188} 1189EXPORT_SYMBOL(scsi_sense_key_string); 1190 1191/* 1192 * Get additional sense code string or NULL if not available. 1193 * This string may contain a "%x" and should be printed with ascq as arg. 1194 */ 1195const char * 1196scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt) 1197{ 1198 int i; 1199 unsigned short code = ((asc << 8) | ascq); 1200 1201 *fmt = NULL; 1202 for (i = 0; additional[i].text; i++) 1203 if (additional[i].code12 == code) 1204 return additional[i].text; 1205 for (i = 0; additional2[i].fmt; i++) { 1206 if (additional2[i].code1 == asc && 1207 ascq >= additional2[i].code2_min && 1208 ascq <= additional2[i].code2_max) { 1209 *fmt = additional2[i].fmt; 1210 return additional2[i].str; 1211 } 1212 } 1213 return NULL; 1214} 1215EXPORT_SYMBOL(scsi_extd_sense_format); 1216 1217static const char * const hostbyte_table[]={ 1218"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", 1219"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", 1220"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE", 1221"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE", 1222"DID_NEXUS_FAILURE" }; 1223 1224static const char * const driverbyte_table[]={ 1225"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", 1226"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; 1227 1228const char *scsi_hostbyte_string(int result) 1229{ 1230 const char *hb_string = NULL; 1231 int hb = host_byte(result); 1232 1233 if (hb < ARRAY_SIZE(hostbyte_table)) 1234 hb_string = hostbyte_table[hb]; 1235 return hb_string; 1236} 1237EXPORT_SYMBOL(scsi_hostbyte_string); 1238 1239const char *scsi_driverbyte_string(int result) 1240{ 1241 const char *db_string = NULL; 1242 int db = driver_byte(result); 1243 1244 if (db < ARRAY_SIZE(driverbyte_table)) 1245 db_string = driverbyte_table[db]; 1246 return db_string; 1247} 1248EXPORT_SYMBOL(scsi_driverbyte_string); 1249 1250#define scsi_mlreturn_name(result) { result, #result } 1251static const struct value_name_pair scsi_mlreturn_arr[] = { 1252 scsi_mlreturn_name(NEEDS_RETRY), 1253 scsi_mlreturn_name(SUCCESS), 1254 scsi_mlreturn_name(FAILED), 1255 scsi_mlreturn_name(QUEUED), 1256 scsi_mlreturn_name(SOFT_ERROR), 1257 scsi_mlreturn_name(ADD_TO_MLQUEUE), 1258 scsi_mlreturn_name(TIMEOUT_ERROR), 1259 scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED), 1260 scsi_mlreturn_name(FAST_IO_FAIL) 1261}; 1262 1263const char *scsi_mlreturn_string(int result) 1264{ 1265 const struct value_name_pair *arr = scsi_mlreturn_arr; 1266 int k; 1267 1268 for (k = 0; k < ARRAY_SIZE(scsi_mlreturn_arr); ++k, ++arr) { 1269 if (result == arr->value) 1270 return arr->name; 1271 } 1272 return NULL; 1273} 1274EXPORT_SYMBOL(scsi_mlreturn_string); 1275