1/* 2 * Adaptec AAC series RAID controller driver 3 * (c) Copyright 2001 Red Hat Inc. 4 * 5 * based on the old aacraid driver that is.. 6 * Adaptec aacraid device driver for Linux. 7 * 8 * Copyright (c) 2000-2010 Adaptec, Inc. 9 * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2, or (at your option) 14 * any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; see the file COPYING. If not, write to 23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 24 * 25 * Module Name: 26 * rx.c 27 * 28 * Abstract: Hardware miniport for Drawbridge specific hardware functions. 29 * 30 */ 31 32#include <linux/kernel.h> 33#include <linux/init.h> 34#include <linux/types.h> 35#include <linux/pci.h> 36#include <linux/spinlock.h> 37#include <linux/blkdev.h> 38#include <linux/delay.h> 39#include <linux/completion.h> 40#include <linux/time.h> 41#include <linux/interrupt.h> 42 43#include <scsi/scsi_host.h> 44 45#include "aacraid.h" 46 47static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id) 48{ 49 struct aac_dev *dev = dev_id; 50 unsigned long bellbits; 51 u8 intstat = rx_readb(dev, MUnit.OISR); 52 53 /* 54 * Read mask and invert because drawbridge is reversed. 55 * This allows us to only service interrupts that have 56 * been enabled. 57 * Check to see if this is our interrupt. If it isn't just return 58 */ 59 if (likely(intstat & ~(dev->OIMR))) { 60 bellbits = rx_readl(dev, OutboundDoorbellReg); 61 if (unlikely(bellbits & DoorBellPrintfReady)) { 62 aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5])); 63 rx_writel(dev, MUnit.ODR,DoorBellPrintfReady); 64 rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); 65 } 66 else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) { 67 rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); 68 aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); 69 } 70 else if (likely(bellbits & DoorBellAdapterNormRespReady)) { 71 rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady); 72 aac_response_normal(&dev->queues->queue[HostNormRespQueue]); 73 } 74 else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) { 75 rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); 76 } 77 else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) { 78 rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); 79 rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull); 80 } 81 return IRQ_HANDLED; 82 } 83 return IRQ_NONE; 84} 85 86static irqreturn_t aac_rx_intr_message(int irq, void *dev_id) 87{ 88 int isAif, isFastResponse, isSpecial; 89 struct aac_dev *dev = dev_id; 90 u32 Index = rx_readl(dev, MUnit.OutboundQueue); 91 if (unlikely(Index == 0xFFFFFFFFL)) 92 Index = rx_readl(dev, MUnit.OutboundQueue); 93 if (likely(Index != 0xFFFFFFFFL)) { 94 do { 95 isAif = isFastResponse = isSpecial = 0; 96 if (Index & 0x00000002L) { 97 isAif = 1; 98 if (Index == 0xFFFFFFFEL) 99 isSpecial = 1; 100 Index &= ~0x00000002L; 101 } else { 102 if (Index & 0x00000001L) 103 isFastResponse = 1; 104 Index >>= 2; 105 } 106 if (!isSpecial) { 107 if (unlikely(aac_intr_normal(dev, 108 Index, isAif, 109 isFastResponse, NULL))) { 110 rx_writel(dev, 111 MUnit.OutboundQueue, 112 Index); 113 rx_writel(dev, 114 MUnit.ODR, 115 DoorBellAdapterNormRespReady); 116 } 117 } 118 Index = rx_readl(dev, MUnit.OutboundQueue); 119 } while (Index != 0xFFFFFFFFL); 120 return IRQ_HANDLED; 121 } 122 return IRQ_NONE; 123} 124 125/** 126 * aac_rx_disable_interrupt - Disable interrupts 127 * @dev: Adapter 128 */ 129 130static void aac_rx_disable_interrupt(struct aac_dev *dev) 131{ 132 rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); 133} 134 135/** 136 * aac_rx_enable_interrupt_producer - Enable interrupts 137 * @dev: Adapter 138 */ 139 140static void aac_rx_enable_interrupt_producer(struct aac_dev *dev) 141{ 142 rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); 143} 144 145/** 146 * aac_rx_enable_interrupt_message - Enable interrupts 147 * @dev: Adapter 148 */ 149 150static void aac_rx_enable_interrupt_message(struct aac_dev *dev) 151{ 152 rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); 153} 154 155/** 156 * rx_sync_cmd - send a command and wait 157 * @dev: Adapter 158 * @command: Command to execute 159 * @p1: first parameter 160 * @ret: adapter status 161 * 162 * This routine will send a synchronous command to the adapter and wait 163 * for its completion. 164 */ 165 166static int rx_sync_cmd(struct aac_dev *dev, u32 command, 167 u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, 168 u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4) 169{ 170 unsigned long start; 171 int ok; 172 /* 173 * Write the command into Mailbox 0 174 */ 175 writel(command, &dev->IndexRegs->Mailbox[0]); 176 /* 177 * Write the parameters into Mailboxes 1 - 6 178 */ 179 writel(p1, &dev->IndexRegs->Mailbox[1]); 180 writel(p2, &dev->IndexRegs->Mailbox[2]); 181 writel(p3, &dev->IndexRegs->Mailbox[3]); 182 writel(p4, &dev->IndexRegs->Mailbox[4]); 183 /* 184 * Clear the synch command doorbell to start on a clean slate. 185 */ 186 rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); 187 /* 188 * Disable doorbell interrupts 189 */ 190 rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); 191 /* 192 * Force the completion of the mask register write before issuing 193 * the interrupt. 194 */ 195 rx_readb (dev, MUnit.OIMR); 196 /* 197 * Signal that there is a new synch command 198 */ 199 rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0); 200 201 ok = 0; 202 start = jiffies; 203 204 /* 205 * Wait up to 30 seconds 206 */ 207 while (time_before(jiffies, start+30*HZ)) 208 { 209 udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ 210 /* 211 * Mon960 will set doorbell0 bit when it has completed the command. 212 */ 213 if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) { 214 /* 215 * Clear the doorbell. 216 */ 217 rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); 218 ok = 1; 219 break; 220 } 221 /* 222 * Yield the processor in case we are slow 223 */ 224 msleep(1); 225 } 226 if (unlikely(ok != 1)) { 227 /* 228 * Restore interrupt mask even though we timed out 229 */ 230 aac_adapter_enable_int(dev); 231 return -ETIMEDOUT; 232 } 233 /* 234 * Pull the synch status from Mailbox 0. 235 */ 236 if (status) 237 *status = readl(&dev->IndexRegs->Mailbox[0]); 238 if (r1) 239 *r1 = readl(&dev->IndexRegs->Mailbox[1]); 240 if (r2) 241 *r2 = readl(&dev->IndexRegs->Mailbox[2]); 242 if (r3) 243 *r3 = readl(&dev->IndexRegs->Mailbox[3]); 244 if (r4) 245 *r4 = readl(&dev->IndexRegs->Mailbox[4]); 246 /* 247 * Clear the synch command doorbell. 248 */ 249 rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); 250 /* 251 * Restore interrupt mask 252 */ 253 aac_adapter_enable_int(dev); 254 return 0; 255 256} 257 258/** 259 * aac_rx_interrupt_adapter - interrupt adapter 260 * @dev: Adapter 261 * 262 * Send an interrupt to the i960 and breakpoint it. 263 */ 264 265static void aac_rx_interrupt_adapter(struct aac_dev *dev) 266{ 267 rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); 268} 269 270/** 271 * aac_rx_notify_adapter - send an event to the adapter 272 * @dev: Adapter 273 * @event: Event to send 274 * 275 * Notify the i960 that something it probably cares about has 276 * happened. 277 */ 278 279static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) 280{ 281 switch (event) { 282 283 case AdapNormCmdQue: 284 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1); 285 break; 286 case HostNormRespNotFull: 287 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4); 288 break; 289 case AdapNormRespQue: 290 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2); 291 break; 292 case HostNormCmdNotFull: 293 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); 294 break; 295 case HostShutdown: 296 break; 297 case FastIo: 298 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); 299 break; 300 case AdapPrintfDone: 301 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5); 302 break; 303 default: 304 BUG(); 305 break; 306 } 307} 308 309/** 310 * aac_rx_start_adapter - activate adapter 311 * @dev: Adapter 312 * 313 * Start up processing on an i960 based AAC adapter 314 */ 315 316static void aac_rx_start_adapter(struct aac_dev *dev) 317{ 318 struct aac_init *init; 319 320 init = dev->init; 321 init->HostElapsedSeconds = cpu_to_le32(get_seconds()); 322 // We can only use a 32 bit address here 323 rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 324 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); 325} 326 327/** 328 * aac_rx_check_health 329 * @dev: device to check if healthy 330 * 331 * Will attempt to determine if the specified adapter is alive and 332 * capable of handling requests, returning 0 if alive. 333 */ 334static int aac_rx_check_health(struct aac_dev *dev) 335{ 336 u32 status = rx_readl(dev, MUnit.OMRx[0]); 337 338 /* 339 * Check to see if the board failed any self tests. 340 */ 341 if (unlikely(status & SELF_TEST_FAILED)) 342 return -1; 343 /* 344 * Check to see if the board panic'd. 345 */ 346 if (unlikely(status & KERNEL_PANIC)) { 347 char * buffer; 348 struct POSTSTATUS { 349 __le32 Post_Command; 350 __le32 Post_Address; 351 } * post; 352 dma_addr_t paddr, baddr; 353 int ret; 354 355 if (likely((status & 0xFF000000L) == 0xBC000000L)) 356 return (status >> 16) & 0xFF; 357 buffer = pci_alloc_consistent(dev->pdev, 512, &baddr); 358 ret = -2; 359 if (unlikely(buffer == NULL)) 360 return ret; 361 post = pci_alloc_consistent(dev->pdev, 362 sizeof(struct POSTSTATUS), &paddr); 363 if (unlikely(post == NULL)) { 364 pci_free_consistent(dev->pdev, 512, buffer, baddr); 365 return ret; 366 } 367 memset(buffer, 0, 512); 368 post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); 369 post->Post_Address = cpu_to_le32(baddr); 370 rx_writel(dev, MUnit.IMRx[0], paddr); 371 rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, 372 NULL, NULL, NULL, NULL, NULL); 373 pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS), 374 post, paddr); 375 if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) { 376 ret = (hex_to_bin(buffer[2]) << 4) + 377 hex_to_bin(buffer[3]); 378 } 379 pci_free_consistent(dev->pdev, 512, buffer, baddr); 380 return ret; 381 } 382 /* 383 * Wait for the adapter to be up and running. 384 */ 385 if (unlikely(!(status & KERNEL_UP_AND_RUNNING))) 386 return -3; 387 /* 388 * Everything is OK 389 */ 390 return 0; 391} 392 393/** 394 * aac_rx_deliver_producer 395 * @fib: fib to issue 396 * 397 * Will send a fib, returning 0 if successful. 398 */ 399int aac_rx_deliver_producer(struct fib * fib) 400{ 401 struct aac_dev *dev = fib->dev; 402 struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; 403 u32 Index; 404 unsigned long nointr = 0; 405 406 aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr); 407 408 atomic_inc(&q->numpending); 409 *(q->headers.producer) = cpu_to_le32(Index + 1); 410 if (!(nointr & aac_config.irq_mod)) 411 aac_adapter_notify(dev, AdapNormCmdQueue); 412 413 return 0; 414} 415 416/** 417 * aac_rx_deliver_message 418 * @fib: fib to issue 419 * 420 * Will send a fib, returning 0 if successful. 421 */ 422static int aac_rx_deliver_message(struct fib * fib) 423{ 424 struct aac_dev *dev = fib->dev; 425 struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; 426 u32 Index; 427 u64 addr; 428 volatile void __iomem *device; 429 430 unsigned long count = 10000000L; /* 50 seconds */ 431 atomic_inc(&q->numpending); 432 for(;;) { 433 Index = rx_readl(dev, MUnit.InboundQueue); 434 if (unlikely(Index == 0xFFFFFFFFL)) 435 Index = rx_readl(dev, MUnit.InboundQueue); 436 if (likely(Index != 0xFFFFFFFFL)) 437 break; 438 if (--count == 0) { 439 atomic_dec(&q->numpending); 440 return -ETIMEDOUT; 441 } 442 udelay(5); 443 } 444 device = dev->base + Index; 445 addr = fib->hw_fib_pa; 446 writel((u32)(addr & 0xffffffff), device); 447 device += sizeof(u32); 448 writel((u32)(addr >> 32), device); 449 device += sizeof(u32); 450 writel(le16_to_cpu(fib->hw_fib_va->header.Size), device); 451 rx_writel(dev, MUnit.InboundQueue, Index); 452 return 0; 453} 454 455/** 456 * aac_rx_ioremap 457 * @size: mapping resize request 458 * 459 */ 460static int aac_rx_ioremap(struct aac_dev * dev, u32 size) 461{ 462 if (!size) { 463 iounmap(dev->regs.rx); 464 return 0; 465 } 466 dev->base = dev->regs.rx = ioremap(dev->base_start, size); 467 if (dev->base == NULL) 468 return -1; 469 dev->IndexRegs = &dev->regs.rx->IndexRegs; 470 return 0; 471} 472 473static int aac_rx_restart_adapter(struct aac_dev *dev, int bled) 474{ 475 u32 var = 0; 476 477 if (!(dev->supplement_adapter_info.SupportedOptions2 & 478 AAC_OPTION_MU_RESET) || (bled >= 0) || (bled == -2)) { 479 if (bled) 480 printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n", 481 dev->name, dev->id, bled); 482 else { 483 bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 484 0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL); 485 if (!bled && (var != 0x00000001) && (var != 0x3803000F)) 486 bled = -EINVAL; 487 } 488 if (bled && (bled != -ETIMEDOUT)) 489 bled = aac_adapter_sync_cmd(dev, IOP_RESET, 490 0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL); 491 492 if (bled && (bled != -ETIMEDOUT)) 493 return -EINVAL; 494 } 495 if (bled && (var == 0x3803000F)) { /* USE_OTHER_METHOD */ 496 rx_writel(dev, MUnit.reserved2, 3); 497 msleep(5000); /* Delay 5 seconds */ 498 var = 0x00000001; 499 } 500 if (bled && (var != 0x00000001)) 501 return -EINVAL; 502 ssleep(5); 503 if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) 504 return -ENODEV; 505 if (startup_timeout < 300) 506 startup_timeout = 300; 507 return 0; 508} 509 510/** 511 * aac_rx_select_comm - Select communications method 512 * @dev: Adapter 513 * @comm: communications method 514 */ 515 516int aac_rx_select_comm(struct aac_dev *dev, int comm) 517{ 518 switch (comm) { 519 case AAC_COMM_PRODUCER: 520 dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_producer; 521 dev->a_ops.adapter_intr = aac_rx_intr_producer; 522 dev->a_ops.adapter_deliver = aac_rx_deliver_producer; 523 break; 524 case AAC_COMM_MESSAGE: 525 dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_message; 526 dev->a_ops.adapter_intr = aac_rx_intr_message; 527 dev->a_ops.adapter_deliver = aac_rx_deliver_message; 528 break; 529 default: 530 return 1; 531 } 532 return 0; 533} 534 535/** 536 * aac_rx_init - initialize an i960 based AAC card 537 * @dev: device to configure 538 * 539 * Allocate and set up resources for the i960 based AAC variants. The 540 * device_interface in the commregion will be allocated and linked 541 * to the comm region. 542 */ 543 544int _aac_rx_init(struct aac_dev *dev) 545{ 546 unsigned long start; 547 unsigned long status; 548 int restart = 0; 549 int instance = dev->id; 550 const char * name = dev->name; 551 552 if (aac_adapter_ioremap(dev, dev->base_size)) { 553 printk(KERN_WARNING "%s: unable to map adapter.\n", name); 554 goto error_iounmap; 555 } 556 557 /* Failure to reset here is an option ... */ 558 dev->a_ops.adapter_sync_cmd = rx_sync_cmd; 559 dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt; 560 dev->OIMR = status = rx_readb (dev, MUnit.OIMR); 561 if ((((status & 0x0c) != 0x0c) || aac_reset_devices || reset_devices) && 562 !aac_rx_restart_adapter(dev, 0)) 563 /* Make sure the Hardware FIFO is empty */ 564 while ((++restart < 512) && 565 (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL)); 566 /* 567 * Check to see if the board panic'd while booting. 568 */ 569 status = rx_readl(dev, MUnit.OMRx[0]); 570 if (status & KERNEL_PANIC) { 571 if (aac_rx_restart_adapter(dev, aac_rx_check_health(dev))) 572 goto error_iounmap; 573 ++restart; 574 } 575 /* 576 * Check to see if the board failed any self tests. 577 */ 578 status = rx_readl(dev, MUnit.OMRx[0]); 579 if (status & SELF_TEST_FAILED) { 580 printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); 581 goto error_iounmap; 582 } 583 /* 584 * Check to see if the monitor panic'd while booting. 585 */ 586 if (status & MONITOR_PANIC) { 587 printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); 588 goto error_iounmap; 589 } 590 start = jiffies; 591 /* 592 * Wait for the adapter to be up and running. Wait up to 3 minutes 593 */ 594 while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING)) 595 { 596 if ((restart && 597 (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || 598 time_after(jiffies, start+HZ*startup_timeout)) { 599 printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", 600 dev->name, instance, status); 601 goto error_iounmap; 602 } 603 if (!restart && 604 ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) || 605 time_after(jiffies, start + HZ * 606 ((startup_timeout > 60) 607 ? (startup_timeout - 60) 608 : (startup_timeout / 2))))) { 609 if (likely(!aac_rx_restart_adapter(dev, aac_rx_check_health(dev)))) 610 start = jiffies; 611 ++restart; 612 } 613 msleep(1); 614 } 615 if (restart && aac_commit) 616 aac_commit = 1; 617 /* 618 * Fill in the common function dispatch table. 619 */ 620 dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter; 621 dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt; 622 dev->a_ops.adapter_notify = aac_rx_notify_adapter; 623 dev->a_ops.adapter_sync_cmd = rx_sync_cmd; 624 dev->a_ops.adapter_check_health = aac_rx_check_health; 625 dev->a_ops.adapter_restart = aac_rx_restart_adapter; 626 dev->a_ops.adapter_start = aac_rx_start_adapter; 627 628 /* 629 * First clear out all interrupts. Then enable the one's that we 630 * can handle. 631 */ 632 aac_adapter_comm(dev, AAC_COMM_PRODUCER); 633 aac_adapter_disable_int(dev); 634 rx_writel(dev, MUnit.ODR, 0xffffffff); 635 aac_adapter_enable_int(dev); 636 637 if (aac_init_adapter(dev) == NULL) 638 goto error_iounmap; 639 aac_adapter_comm(dev, dev->comm_interface); 640 dev->sync_mode = 0; /* sync. mode not supported */ 641 dev->msi = aac_msi && !pci_enable_msi(dev->pdev); 642 if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, 643 IRQF_SHARED, "aacraid", dev) < 0) { 644 if (dev->msi) 645 pci_disable_msi(dev->pdev); 646 printk(KERN_ERR "%s%d: Interrupt unavailable.\n", 647 name, instance); 648 goto error_iounmap; 649 } 650 dev->dbg_base = dev->base_start; 651 dev->dbg_base_mapped = dev->base; 652 dev->dbg_size = dev->base_size; 653 654 aac_adapter_enable_int(dev); 655 /* 656 * Tell the adapter that all is configured, and it can 657 * start accepting requests 658 */ 659 aac_rx_start_adapter(dev); 660 661 return 0; 662 663error_iounmap: 664 665 return -1; 666} 667 668int aac_rx_init(struct aac_dev *dev) 669{ 670 /* 671 * Fill in the function dispatch table. 672 */ 673 dev->a_ops.adapter_ioremap = aac_rx_ioremap; 674 dev->a_ops.adapter_comm = aac_rx_select_comm; 675 676 return _aac_rx_init(dev); 677} 678