1/* 2 * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series 3 * 4 * Copyright 2009 Wolfson Microelectronics PLC. 5 * 6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 */ 13 14#include <linux/module.h> 15#include <linux/moduleparam.h> 16#include <linux/init.h> 17#include <linux/bitops.h> 18#include <linux/err.h> 19#include <linux/i2c.h> 20#include <linux/platform_device.h> 21#include <linux/regulator/driver.h> 22#include <linux/regulator/machine.h> 23#include <linux/gpio.h> 24#include <linux/slab.h> 25 26#include <linux/mfd/wm831x/core.h> 27#include <linux/mfd/wm831x/regulator.h> 28#include <linux/mfd/wm831x/pdata.h> 29 30#define WM831X_BUCKV_MAX_SELECTOR 0x68 31#define WM831X_BUCKP_MAX_SELECTOR 0x66 32 33#define WM831X_DCDC_MODE_FAST 0 34#define WM831X_DCDC_MODE_NORMAL 1 35#define WM831X_DCDC_MODE_IDLE 2 36#define WM831X_DCDC_MODE_STANDBY 3 37 38#define WM831X_DCDC_MAX_NAME 9 39 40/* Register offsets in control block */ 41#define WM831X_DCDC_CONTROL_1 0 42#define WM831X_DCDC_CONTROL_2 1 43#define WM831X_DCDC_ON_CONFIG 2 44#define WM831X_DCDC_SLEEP_CONTROL 3 45#define WM831X_DCDC_DVS_CONTROL 4 46 47/* 48 * Shared 49 */ 50 51struct wm831x_dcdc { 52 char name[WM831X_DCDC_MAX_NAME]; 53 char supply_name[WM831X_DCDC_MAX_NAME]; 54 struct regulator_desc desc; 55 int base; 56 struct wm831x *wm831x; 57 struct regulator_dev *regulator; 58 int dvs_gpio; 59 int dvs_gpio_state; 60 int on_vsel; 61 int dvs_vsel; 62}; 63 64static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev) 65 66{ 67 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 68 struct wm831x *wm831x = dcdc->wm831x; 69 u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; 70 int val; 71 72 val = wm831x_reg_read(wm831x, reg); 73 if (val < 0) 74 return val; 75 76 val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT; 77 78 switch (val) { 79 case WM831X_DCDC_MODE_FAST: 80 return REGULATOR_MODE_FAST; 81 case WM831X_DCDC_MODE_NORMAL: 82 return REGULATOR_MODE_NORMAL; 83 case WM831X_DCDC_MODE_STANDBY: 84 return REGULATOR_MODE_STANDBY; 85 case WM831X_DCDC_MODE_IDLE: 86 return REGULATOR_MODE_IDLE; 87 default: 88 BUG(); 89 return -EINVAL; 90 } 91} 92 93static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg, 94 unsigned int mode) 95{ 96 int val; 97 98 switch (mode) { 99 case REGULATOR_MODE_FAST: 100 val = WM831X_DCDC_MODE_FAST; 101 break; 102 case REGULATOR_MODE_NORMAL: 103 val = WM831X_DCDC_MODE_NORMAL; 104 break; 105 case REGULATOR_MODE_STANDBY: 106 val = WM831X_DCDC_MODE_STANDBY; 107 break; 108 case REGULATOR_MODE_IDLE: 109 val = WM831X_DCDC_MODE_IDLE; 110 break; 111 default: 112 return -EINVAL; 113 } 114 115 return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK, 116 val << WM831X_DC1_ON_MODE_SHIFT); 117} 118 119static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) 120{ 121 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 122 struct wm831x *wm831x = dcdc->wm831x; 123 u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; 124 125 return wm831x_dcdc_set_mode_int(wm831x, reg, mode); 126} 127 128static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev, 129 unsigned int mode) 130{ 131 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 132 struct wm831x *wm831x = dcdc->wm831x; 133 u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; 134 135 return wm831x_dcdc_set_mode_int(wm831x, reg, mode); 136} 137 138static int wm831x_dcdc_get_status(struct regulator_dev *rdev) 139{ 140 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 141 struct wm831x *wm831x = dcdc->wm831x; 142 int ret; 143 144 /* First, check for errors */ 145 ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); 146 if (ret < 0) 147 return ret; 148 149 if (ret & (1 << rdev_get_id(rdev))) { 150 dev_dbg(wm831x->dev, "DCDC%d under voltage\n", 151 rdev_get_id(rdev) + 1); 152 return REGULATOR_STATUS_ERROR; 153 } 154 155 /* DCDC1 and DCDC2 can additionally detect high voltage/current */ 156 if (rdev_get_id(rdev) < 2) { 157 if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) { 158 dev_dbg(wm831x->dev, "DCDC%d over voltage\n", 159 rdev_get_id(rdev) + 1); 160 return REGULATOR_STATUS_ERROR; 161 } 162 163 if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) { 164 dev_dbg(wm831x->dev, "DCDC%d over current\n", 165 rdev_get_id(rdev) + 1); 166 return REGULATOR_STATUS_ERROR; 167 } 168 } 169 170 /* Is the regulator on? */ 171 ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); 172 if (ret < 0) 173 return ret; 174 if (!(ret & (1 << rdev_get_id(rdev)))) 175 return REGULATOR_STATUS_OFF; 176 177 /* TODO: When we handle hardware control modes so we can report the 178 * current mode. */ 179 return REGULATOR_STATUS_ON; 180} 181 182static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data) 183{ 184 struct wm831x_dcdc *dcdc = data; 185 186 regulator_notifier_call_chain(dcdc->regulator, 187 REGULATOR_EVENT_UNDER_VOLTAGE, 188 NULL); 189 190 return IRQ_HANDLED; 191} 192 193static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) 194{ 195 struct wm831x_dcdc *dcdc = data; 196 197 regulator_notifier_call_chain(dcdc->regulator, 198 REGULATOR_EVENT_OVER_CURRENT, 199 NULL); 200 201 return IRQ_HANDLED; 202} 203 204/* 205 * BUCKV specifics 206 */ 207 208static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, 209 unsigned selector) 210{ 211 if (selector <= 0x8) 212 return 600000; 213 if (selector <= WM831X_BUCKV_MAX_SELECTOR) 214 return 600000 + ((selector - 0x8) * 12500); 215 return -EINVAL; 216} 217 218static int wm831x_buckv_map_voltage(struct regulator_dev *rdev, 219 int min_uV, int max_uV) 220{ 221 u16 vsel; 222 223 if (min_uV < 600000) 224 vsel = 0; 225 else if (min_uV <= 1800000) 226 vsel = DIV_ROUND_UP(min_uV - 600000, 12500) + 8; 227 else 228 return -EINVAL; 229 230 if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) 231 return -EINVAL; 232 233 return vsel; 234} 235 236static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) 237{ 238 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 239 240 if (state == dcdc->dvs_gpio_state) 241 return 0; 242 243 dcdc->dvs_gpio_state = state; 244 gpio_set_value(dcdc->dvs_gpio, state); 245 246 /* Should wait for DVS state change to be asserted if we have 247 * a GPIO for it, for now assume the device is configured 248 * for the fastest possible transition. 249 */ 250 251 return 0; 252} 253 254static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev, 255 unsigned vsel) 256{ 257 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 258 struct wm831x *wm831x = dcdc->wm831x; 259 int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG; 260 int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL; 261 int ret; 262 263 /* If this value is already set then do a GPIO update if we can */ 264 if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) 265 return wm831x_buckv_set_dvs(rdev, 0); 266 267 if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) 268 return wm831x_buckv_set_dvs(rdev, 1); 269 270 /* Always set the ON status to the minimum voltage */ 271 ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel); 272 if (ret < 0) 273 return ret; 274 dcdc->on_vsel = vsel; 275 276 if (!dcdc->dvs_gpio) 277 return ret; 278 279 /* Kick the voltage transition now */ 280 ret = wm831x_buckv_set_dvs(rdev, 0); 281 if (ret < 0) 282 return ret; 283 284 /* 285 * If this VSEL is higher than the last one we've seen then 286 * remember it as the DVS VSEL. This is optimised for CPUfreq 287 * usage where we want to get to the highest voltage very 288 * quickly. 289 */ 290 if (vsel > dcdc->dvs_vsel) { 291 ret = wm831x_set_bits(wm831x, dvs_reg, 292 WM831X_DC1_DVS_VSEL_MASK, 293 vsel); 294 if (ret == 0) 295 dcdc->dvs_vsel = vsel; 296 else 297 dev_warn(wm831x->dev, 298 "Failed to set DCDC DVS VSEL: %d\n", ret); 299 } 300 301 return 0; 302} 303 304static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, 305 int uV) 306{ 307 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 308 struct wm831x *wm831x = dcdc->wm831x; 309 u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; 310 int vsel; 311 312 vsel = wm831x_buckv_map_voltage(rdev, uV, uV); 313 if (vsel < 0) 314 return vsel; 315 316 return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel); 317} 318 319static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev) 320{ 321 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 322 323 if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) 324 return dcdc->dvs_vsel; 325 else 326 return dcdc->on_vsel; 327} 328 329/* Current limit options */ 330static u16 wm831x_dcdc_ilim[] = { 331 125, 250, 375, 500, 625, 750, 875, 1000 332}; 333 334static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, 335 int min_uA, int max_uA) 336{ 337 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 338 struct wm831x *wm831x = dcdc->wm831x; 339 u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; 340 int i; 341 342 for (i = ARRAY_SIZE(wm831x_dcdc_ilim) - 1; i >= 0; i--) { 343 if ((min_uA <= wm831x_dcdc_ilim[i]) && 344 (wm831x_dcdc_ilim[i] <= max_uA)) 345 return wm831x_set_bits(wm831x, reg, 346 WM831X_DC1_HC_THR_MASK, 347 i << WM831X_DC1_HC_THR_SHIFT); 348 } 349 350 return -EINVAL; 351} 352 353static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) 354{ 355 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 356 struct wm831x *wm831x = dcdc->wm831x; 357 u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; 358 int val; 359 360 val = wm831x_reg_read(wm831x, reg); 361 if (val < 0) 362 return val; 363 364 val = (val & WM831X_DC1_HC_THR_MASK) >> WM831X_DC1_HC_THR_SHIFT; 365 return wm831x_dcdc_ilim[val]; 366} 367 368static struct regulator_ops wm831x_buckv_ops = { 369 .set_voltage_sel = wm831x_buckv_set_voltage_sel, 370 .get_voltage_sel = wm831x_buckv_get_voltage_sel, 371 .list_voltage = wm831x_buckv_list_voltage, 372 .map_voltage = wm831x_buckv_map_voltage, 373 .set_suspend_voltage = wm831x_buckv_set_suspend_voltage, 374 .set_current_limit = wm831x_buckv_set_current_limit, 375 .get_current_limit = wm831x_buckv_get_current_limit, 376 377 .is_enabled = regulator_is_enabled_regmap, 378 .enable = regulator_enable_regmap, 379 .disable = regulator_disable_regmap, 380 .get_status = wm831x_dcdc_get_status, 381 .get_mode = wm831x_dcdc_get_mode, 382 .set_mode = wm831x_dcdc_set_mode, 383 .set_suspend_mode = wm831x_dcdc_set_suspend_mode, 384}; 385 386/* 387 * Set up DVS control. We just log errors since we can still run 388 * (with reduced performance) if we fail. 389 */ 390static void wm831x_buckv_dvs_init(struct platform_device *pdev, 391 struct wm831x_dcdc *dcdc, 392 struct wm831x_buckv_pdata *pdata) 393{ 394 struct wm831x *wm831x = dcdc->wm831x; 395 int ret; 396 u16 ctrl; 397 398 if (!pdata || !pdata->dvs_gpio) 399 return; 400 401 /* gpiolib won't let us read the GPIO status so pick the higher 402 * of the two existing voltages so we take it as platform data. 403 */ 404 dcdc->dvs_gpio_state = pdata->dvs_init_state; 405 406 ret = devm_gpio_request_one(&pdev->dev, pdata->dvs_gpio, 407 dcdc->dvs_gpio_state ? GPIOF_INIT_HIGH : 0, 408 "DCDC DVS"); 409 if (ret < 0) { 410 dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", 411 dcdc->name, ret); 412 return; 413 } 414 415 dcdc->dvs_gpio = pdata->dvs_gpio; 416 417 switch (pdata->dvs_control_src) { 418 case 1: 419 ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; 420 break; 421 case 2: 422 ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT; 423 break; 424 default: 425 dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n", 426 pdata->dvs_control_src, dcdc->name); 427 return; 428 } 429 430 /* If DVS_VSEL is set to the minimum value then raise it to ON_VSEL 431 * to make bootstrapping a bit smoother. 432 */ 433 if (!dcdc->dvs_vsel) { 434 ret = wm831x_set_bits(wm831x, 435 dcdc->base + WM831X_DCDC_DVS_CONTROL, 436 WM831X_DC1_DVS_VSEL_MASK, dcdc->on_vsel); 437 if (ret == 0) 438 dcdc->dvs_vsel = dcdc->on_vsel; 439 else 440 dev_warn(wm831x->dev, "Failed to set DVS_VSEL: %d\n", 441 ret); 442 } 443 444 ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL, 445 WM831X_DC1_DVS_SRC_MASK, ctrl); 446 if (ret < 0) { 447 dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n", 448 dcdc->name, ret); 449 } 450} 451 452static int wm831x_buckv_probe(struct platform_device *pdev) 453{ 454 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); 455 struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev); 456 struct regulator_config config = { }; 457 int id; 458 struct wm831x_dcdc *dcdc; 459 struct resource *res; 460 int ret, irq; 461 462 if (pdata && pdata->wm831x_num) 463 id = (pdata->wm831x_num * 10) + 1; 464 else 465 id = 0; 466 id = pdev->id - id; 467 468 dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); 469 470 dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc), 471 GFP_KERNEL); 472 if (!dcdc) 473 return -ENOMEM; 474 475 dcdc->wm831x = wm831x; 476 477 res = platform_get_resource(pdev, IORESOURCE_REG, 0); 478 if (res == NULL) { 479 dev_err(&pdev->dev, "No REG resource\n"); 480 ret = -EINVAL; 481 goto err; 482 } 483 dcdc->base = res->start; 484 485 snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); 486 dcdc->desc.name = dcdc->name; 487 488 snprintf(dcdc->supply_name, sizeof(dcdc->supply_name), 489 "DC%dVDD", id + 1); 490 dcdc->desc.supply_name = dcdc->supply_name; 491 492 dcdc->desc.id = id; 493 dcdc->desc.type = REGULATOR_VOLTAGE; 494 dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1; 495 dcdc->desc.ops = &wm831x_buckv_ops; 496 dcdc->desc.owner = THIS_MODULE; 497 dcdc->desc.enable_reg = WM831X_DCDC_ENABLE; 498 dcdc->desc.enable_mask = 1 << id; 499 500 ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); 501 if (ret < 0) { 502 dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret); 503 goto err; 504 } 505 dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK; 506 507 ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL); 508 if (ret < 0) { 509 dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret); 510 goto err; 511 } 512 dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK; 513 514 if (pdata && pdata->dcdc[id]) 515 wm831x_buckv_dvs_init(pdev, dcdc, 516 pdata->dcdc[id]->driver_data); 517 518 config.dev = pdev->dev.parent; 519 if (pdata) 520 config.init_data = pdata->dcdc[id]; 521 config.driver_data = dcdc; 522 config.regmap = wm831x->regmap; 523 524 dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc, 525 &config); 526 if (IS_ERR(dcdc->regulator)) { 527 ret = PTR_ERR(dcdc->regulator); 528 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", 529 id + 1, ret); 530 goto err; 531 } 532 533 irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV")); 534 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, 535 wm831x_dcdc_uv_irq, 536 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 537 dcdc->name, dcdc); 538 if (ret != 0) { 539 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", 540 irq, ret); 541 goto err; 542 } 543 544 irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "HC")); 545 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, 546 wm831x_dcdc_oc_irq, 547 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 548 dcdc->name, dcdc); 549 if (ret != 0) { 550 dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n", 551 irq, ret); 552 goto err; 553 } 554 555 platform_set_drvdata(pdev, dcdc); 556 557 return 0; 558 559err: 560 return ret; 561} 562 563static struct platform_driver wm831x_buckv_driver = { 564 .probe = wm831x_buckv_probe, 565 .driver = { 566 .name = "wm831x-buckv", 567 }, 568}; 569 570/* 571 * BUCKP specifics 572 */ 573 574static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, int uV) 575{ 576 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 577 struct wm831x *wm831x = dcdc->wm831x; 578 u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; 579 int sel; 580 581 sel = regulator_map_voltage_linear(rdev, uV, uV); 582 if (sel < 0) 583 return sel; 584 585 return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, sel); 586} 587 588static struct regulator_ops wm831x_buckp_ops = { 589 .set_voltage_sel = regulator_set_voltage_sel_regmap, 590 .get_voltage_sel = regulator_get_voltage_sel_regmap, 591 .list_voltage = regulator_list_voltage_linear, 592 .map_voltage = regulator_map_voltage_linear, 593 .set_suspend_voltage = wm831x_buckp_set_suspend_voltage, 594 595 .is_enabled = regulator_is_enabled_regmap, 596 .enable = regulator_enable_regmap, 597 .disable = regulator_disable_regmap, 598 .get_status = wm831x_dcdc_get_status, 599 .get_mode = wm831x_dcdc_get_mode, 600 .set_mode = wm831x_dcdc_set_mode, 601 .set_suspend_mode = wm831x_dcdc_set_suspend_mode, 602}; 603 604static int wm831x_buckp_probe(struct platform_device *pdev) 605{ 606 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); 607 struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev); 608 struct regulator_config config = { }; 609 int id; 610 struct wm831x_dcdc *dcdc; 611 struct resource *res; 612 int ret, irq; 613 614 if (pdata && pdata->wm831x_num) 615 id = (pdata->wm831x_num * 10) + 1; 616 else 617 id = 0; 618 id = pdev->id - id; 619 620 dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); 621 622 dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc), 623 GFP_KERNEL); 624 if (!dcdc) 625 return -ENOMEM; 626 627 dcdc->wm831x = wm831x; 628 629 res = platform_get_resource(pdev, IORESOURCE_REG, 0); 630 if (res == NULL) { 631 dev_err(&pdev->dev, "No REG resource\n"); 632 ret = -EINVAL; 633 goto err; 634 } 635 dcdc->base = res->start; 636 637 snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); 638 dcdc->desc.name = dcdc->name; 639 640 snprintf(dcdc->supply_name, sizeof(dcdc->supply_name), 641 "DC%dVDD", id + 1); 642 dcdc->desc.supply_name = dcdc->supply_name; 643 644 dcdc->desc.id = id; 645 dcdc->desc.type = REGULATOR_VOLTAGE; 646 dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1; 647 dcdc->desc.ops = &wm831x_buckp_ops; 648 dcdc->desc.owner = THIS_MODULE; 649 dcdc->desc.vsel_reg = dcdc->base + WM831X_DCDC_ON_CONFIG; 650 dcdc->desc.vsel_mask = WM831X_DC3_ON_VSEL_MASK; 651 dcdc->desc.enable_reg = WM831X_DCDC_ENABLE; 652 dcdc->desc.enable_mask = 1 << id; 653 dcdc->desc.min_uV = 850000; 654 dcdc->desc.uV_step = 25000; 655 656 config.dev = pdev->dev.parent; 657 if (pdata) 658 config.init_data = pdata->dcdc[id]; 659 config.driver_data = dcdc; 660 config.regmap = wm831x->regmap; 661 662 dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc, 663 &config); 664 if (IS_ERR(dcdc->regulator)) { 665 ret = PTR_ERR(dcdc->regulator); 666 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", 667 id + 1, ret); 668 goto err; 669 } 670 671 irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV")); 672 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, 673 wm831x_dcdc_uv_irq, 674 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 675 dcdc->name, dcdc); 676 if (ret != 0) { 677 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", 678 irq, ret); 679 goto err; 680 } 681 682 platform_set_drvdata(pdev, dcdc); 683 684 return 0; 685 686err: 687 return ret; 688} 689 690static struct platform_driver wm831x_buckp_driver = { 691 .probe = wm831x_buckp_probe, 692 .driver = { 693 .name = "wm831x-buckp", 694 }, 695}; 696 697/* 698 * DCDC boost convertors 699 */ 700 701static int wm831x_boostp_get_status(struct regulator_dev *rdev) 702{ 703 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); 704 struct wm831x *wm831x = dcdc->wm831x; 705 int ret; 706 707 /* First, check for errors */ 708 ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); 709 if (ret < 0) 710 return ret; 711 712 if (ret & (1 << rdev_get_id(rdev))) { 713 dev_dbg(wm831x->dev, "DCDC%d under voltage\n", 714 rdev_get_id(rdev) + 1); 715 return REGULATOR_STATUS_ERROR; 716 } 717 718 /* Is the regulator on? */ 719 ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); 720 if (ret < 0) 721 return ret; 722 if (ret & (1 << rdev_get_id(rdev))) 723 return REGULATOR_STATUS_ON; 724 else 725 return REGULATOR_STATUS_OFF; 726} 727 728static struct regulator_ops wm831x_boostp_ops = { 729 .get_status = wm831x_boostp_get_status, 730 731 .is_enabled = regulator_is_enabled_regmap, 732 .enable = regulator_enable_regmap, 733 .disable = regulator_disable_regmap, 734}; 735 736static int wm831x_boostp_probe(struct platform_device *pdev) 737{ 738 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); 739 struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev); 740 struct regulator_config config = { }; 741 int id = pdev->id % ARRAY_SIZE(pdata->dcdc); 742 struct wm831x_dcdc *dcdc; 743 struct resource *res; 744 int ret, irq; 745 746 dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); 747 748 if (pdata == NULL || pdata->dcdc[id] == NULL) 749 return -ENODEV; 750 751 dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc), GFP_KERNEL); 752 if (!dcdc) 753 return -ENOMEM; 754 755 dcdc->wm831x = wm831x; 756 757 res = platform_get_resource(pdev, IORESOURCE_REG, 0); 758 if (res == NULL) { 759 dev_err(&pdev->dev, "No REG resource\n"); 760 return -EINVAL; 761 } 762 dcdc->base = res->start; 763 764 snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); 765 dcdc->desc.name = dcdc->name; 766 dcdc->desc.id = id; 767 dcdc->desc.type = REGULATOR_VOLTAGE; 768 dcdc->desc.ops = &wm831x_boostp_ops; 769 dcdc->desc.owner = THIS_MODULE; 770 dcdc->desc.enable_reg = WM831X_DCDC_ENABLE; 771 dcdc->desc.enable_mask = 1 << id; 772 773 config.dev = pdev->dev.parent; 774 if (pdata) 775 config.init_data = pdata->dcdc[id]; 776 config.driver_data = dcdc; 777 config.regmap = wm831x->regmap; 778 779 dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc, 780 &config); 781 if (IS_ERR(dcdc->regulator)) { 782 ret = PTR_ERR(dcdc->regulator); 783 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", 784 id + 1, ret); 785 return ret; 786 } 787 788 irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV")); 789 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, 790 wm831x_dcdc_uv_irq, 791 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 792 dcdc->name, 793 dcdc); 794 if (ret != 0) { 795 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", 796 irq, ret); 797 return ret; 798 } 799 800 platform_set_drvdata(pdev, dcdc); 801 802 return 0; 803} 804 805static struct platform_driver wm831x_boostp_driver = { 806 .probe = wm831x_boostp_probe, 807 .driver = { 808 .name = "wm831x-boostp", 809 }, 810}; 811 812/* 813 * External Power Enable 814 * 815 * These aren't actually DCDCs but look like them in hardware so share 816 * code. 817 */ 818 819#define WM831X_EPE_BASE 6 820 821static struct regulator_ops wm831x_epe_ops = { 822 .is_enabled = regulator_is_enabled_regmap, 823 .enable = regulator_enable_regmap, 824 .disable = regulator_disable_regmap, 825 .get_status = wm831x_dcdc_get_status, 826}; 827 828static int wm831x_epe_probe(struct platform_device *pdev) 829{ 830 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); 831 struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev); 832 struct regulator_config config = { }; 833 int id = pdev->id % ARRAY_SIZE(pdata->epe); 834 struct wm831x_dcdc *dcdc; 835 int ret; 836 837 dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1); 838 839 dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc), GFP_KERNEL); 840 if (!dcdc) 841 return -ENOMEM; 842 843 dcdc->wm831x = wm831x; 844 845 /* For current parts this is correct; probably need to revisit 846 * in future. 847 */ 848 snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1); 849 dcdc->desc.name = dcdc->name; 850 dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */ 851 dcdc->desc.ops = &wm831x_epe_ops; 852 dcdc->desc.type = REGULATOR_VOLTAGE; 853 dcdc->desc.owner = THIS_MODULE; 854 dcdc->desc.enable_reg = WM831X_DCDC_ENABLE; 855 dcdc->desc.enable_mask = 1 << dcdc->desc.id; 856 857 config.dev = pdev->dev.parent; 858 if (pdata) 859 config.init_data = pdata->epe[id]; 860 config.driver_data = dcdc; 861 config.regmap = wm831x->regmap; 862 863 dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc, 864 &config); 865 if (IS_ERR(dcdc->regulator)) { 866 ret = PTR_ERR(dcdc->regulator); 867 dev_err(wm831x->dev, "Failed to register EPE%d: %d\n", 868 id + 1, ret); 869 goto err; 870 } 871 872 platform_set_drvdata(pdev, dcdc); 873 874 return 0; 875 876err: 877 return ret; 878} 879 880static struct platform_driver wm831x_epe_driver = { 881 .probe = wm831x_epe_probe, 882 .driver = { 883 .name = "wm831x-epe", 884 }, 885}; 886 887static int __init wm831x_dcdc_init(void) 888{ 889 int ret; 890 ret = platform_driver_register(&wm831x_buckv_driver); 891 if (ret != 0) 892 pr_err("Failed to register WM831x BUCKV driver: %d\n", ret); 893 894 ret = platform_driver_register(&wm831x_buckp_driver); 895 if (ret != 0) 896 pr_err("Failed to register WM831x BUCKP driver: %d\n", ret); 897 898 ret = platform_driver_register(&wm831x_boostp_driver); 899 if (ret != 0) 900 pr_err("Failed to register WM831x BOOST driver: %d\n", ret); 901 902 ret = platform_driver_register(&wm831x_epe_driver); 903 if (ret != 0) 904 pr_err("Failed to register WM831x EPE driver: %d\n", ret); 905 906 return 0; 907} 908subsys_initcall(wm831x_dcdc_init); 909 910static void __exit wm831x_dcdc_exit(void) 911{ 912 platform_driver_unregister(&wm831x_epe_driver); 913 platform_driver_unregister(&wm831x_boostp_driver); 914 platform_driver_unregister(&wm831x_buckp_driver); 915 platform_driver_unregister(&wm831x_buckv_driver); 916} 917module_exit(wm831x_dcdc_exit); 918 919/* Module information */ 920MODULE_AUTHOR("Mark Brown"); 921MODULE_DESCRIPTION("WM831x DC-DC convertor driver"); 922MODULE_LICENSE("GPL"); 923MODULE_ALIAS("platform:wm831x-buckv"); 924MODULE_ALIAS("platform:wm831x-buckp"); 925MODULE_ALIAS("platform:wm831x-boostp"); 926MODULE_ALIAS("platform:wm831x-epe"); 927