1/* 2 * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 3 * Copyright (c) 2008, Jouni Malinen <j@w1.fi> 4 * Copyright (c) 2011, Javier Lopez <jlopex@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 11#ifndef __MAC80211_HWSIM_H 12#define __MAC80211_HWSIM_H 13 14/** 15 * enum hwsim_tx_control_flags - flags to describe transmission info/status 16 * 17 * These flags are used to give the wmediumd extra information in order to 18 * modify its behavior for each frame 19 * 20 * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. 21 * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack 22 * @HWSIM_TX_STAT_ACK: Frame was acknowledged 23 * 24 */ 25enum hwsim_tx_control_flags { 26 HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0), 27 HWSIM_TX_CTL_NO_ACK = BIT(1), 28 HWSIM_TX_STAT_ACK = BIT(2), 29}; 30 31/** 32 * DOC: Frame transmission/registration support 33 * 34 * Frame transmission and registration support exists to allow userspace 35 * entities such as wmediumd to receive and process all broadcasted 36 * frames from a mac80211_hwsim radio device. 37 * 38 * This allow user space applications to decide if the frame should be 39 * dropped or not and implement a wireless medium simulator at user space. 40 * 41 * Registration is done by sending a register message to the driver and 42 * will be automatically unregistered if the user application doesn't 43 * responds to sent frames. 44 * Once registered the user application has to take responsibility of 45 * broadcasting the frames to all listening mac80211_hwsim radio 46 * interfaces. 47 * 48 * For more technical details, see the corresponding command descriptions 49 * below. 50 */ 51 52/** 53 * enum hwsim_commands - supported hwsim commands 54 * 55 * @HWSIM_CMD_UNSPEC: unspecified command to catch errors 56 * 57 * @HWSIM_CMD_REGISTER: request to register and received all broadcasted 58 * frames by any mac80211_hwsim radio device. 59 * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user 60 * space, uses: 61 * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER, 62 * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE, 63 * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional) 64 * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to 65 * kernel, uses: 66 * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS, 67 * %HWSIM_ATTR_TX_INFO, %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE 68 * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters, 69 * returns the radio ID (>= 0) or negative on errors, if successful 70 * then multicast the result 71 * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted 72 * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses: 73 * %HWSIM_ATTR_RADIO_ID 74 * @__HWSIM_CMD_MAX: enum limit 75 */ 76enum { 77 HWSIM_CMD_UNSPEC, 78 HWSIM_CMD_REGISTER, 79 HWSIM_CMD_FRAME, 80 HWSIM_CMD_TX_INFO_FRAME, 81 HWSIM_CMD_NEW_RADIO, 82 HWSIM_CMD_DEL_RADIO, 83 HWSIM_CMD_GET_RADIO, 84 __HWSIM_CMD_MAX, 85}; 86#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1) 87 88#define HWSIM_CMD_CREATE_RADIO HWSIM_CMD_NEW_RADIO 89#define HWSIM_CMD_DESTROY_RADIO HWSIM_CMD_DEL_RADIO 90 91/** 92 * enum hwsim_attrs - hwsim netlink attributes 93 * 94 * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors 95 * 96 * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that 97 * the frame is broadcasted to 98 * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that 99 * the frame was broadcasted from 100 * @HWSIM_ATTR_FRAME: Data array 101 * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process 102 properly the frame at user space 103 * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user 104 space 105 * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user 106 space 107 * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array 108 * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame 109 * @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO 110 * command giving the number of channels supported by the new radio 111 * @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO 112 * only to destroy a radio 113 * @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint 114 * (nla string, length 2) 115 * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute) 116 * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute) 117 * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag) 118 * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO 119 * command to force use of channel contexts even when only a 120 * single channel is supported 121 * @HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE: used with the %HWSIM_CMD_CREATE_RADIO 122 * command to force radio removal when process that created the radio dies 123 * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666 124 * @HWSIM_ATTR_NO_VIF: Do not create vif (wlanX) when creating radio. 125 * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received. 126 * @__HWSIM_ATTR_MAX: enum limit 127 */ 128 129 130enum { 131 HWSIM_ATTR_UNSPEC, 132 HWSIM_ATTR_ADDR_RECEIVER, 133 HWSIM_ATTR_ADDR_TRANSMITTER, 134 HWSIM_ATTR_FRAME, 135 HWSIM_ATTR_FLAGS, 136 HWSIM_ATTR_RX_RATE, 137 HWSIM_ATTR_SIGNAL, 138 HWSIM_ATTR_TX_INFO, 139 HWSIM_ATTR_COOKIE, 140 HWSIM_ATTR_CHANNELS, 141 HWSIM_ATTR_RADIO_ID, 142 HWSIM_ATTR_REG_HINT_ALPHA2, 143 HWSIM_ATTR_REG_CUSTOM_REG, 144 HWSIM_ATTR_REG_STRICT_REG, 145 HWSIM_ATTR_SUPPORT_P2P_DEVICE, 146 HWSIM_ATTR_USE_CHANCTX, 147 HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, 148 HWSIM_ATTR_RADIO_NAME, 149 HWSIM_ATTR_NO_VIF, 150 HWSIM_ATTR_FREQ, 151 __HWSIM_ATTR_MAX, 152}; 153#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1) 154 155/** 156 * struct hwsim_tx_rate - rate selection/status 157 * 158 * @idx: rate index to attempt to send with 159 * @count: number of tries in this rate before going to the next rate 160 * 161 * A value of -1 for @idx indicates an invalid rate and, if used 162 * in an array of retry rates, that no more rates should be tried. 163 * 164 * When used for transmit status reporting, the driver should 165 * always report the rate and number of retries used. 166 * 167 */ 168struct hwsim_tx_rate { 169 s8 idx; 170 u8 count; 171} __packed; 172 173#endif /* __MAC80211_HWSIM_H */ 174