1/**************************************************************************** 2 * Driver for Solarflare network controllers and boards 3 * Copyright 2007-2011 Solarflare Communications Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published 7 * by the Free Software Foundation, incorporated herein by reference. 8 */ 9 10#include <linux/delay.h> 11#include <linux/rtnetlink.h> 12#include <linux/seq_file.h> 13#include <linux/slab.h> 14#include "efx.h" 15#include "mdio_10g.h" 16#include "nic.h" 17#include "phy.h" 18#include "workarounds.h" 19 20/* We expect these MMDs to be in the package. */ 21#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD | \ 22 MDIO_DEVS_PCS | \ 23 MDIO_DEVS_PHYXS | \ 24 MDIO_DEVS_AN) 25 26#define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \ 27 (1 << LOOPBACK_PCS) | \ 28 (1 << LOOPBACK_PMAPMD) | \ 29 (1 << LOOPBACK_PHYXS_WS)) 30 31/* We complain if we fail to see the link partner as 10G capable this many 32 * times in a row (must be > 1 as sampling the autoneg. registers is racy) 33 */ 34#define MAX_BAD_LP_TRIES (5) 35 36/* Extended control register */ 37#define PMA_PMD_XCONTROL_REG 49152 38#define PMA_PMD_EXT_GMII_EN_LBN 1 39#define PMA_PMD_EXT_GMII_EN_WIDTH 1 40#define PMA_PMD_EXT_CLK_OUT_LBN 2 41#define PMA_PMD_EXT_CLK_OUT_WIDTH 1 42#define PMA_PMD_LNPGA_POWERDOWN_LBN 8 43#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1 44#define PMA_PMD_EXT_CLK312_WIDTH 1 45#define PMA_PMD_EXT_LPOWER_LBN 12 46#define PMA_PMD_EXT_LPOWER_WIDTH 1 47#define PMA_PMD_EXT_ROBUST_LBN 14 48#define PMA_PMD_EXT_ROBUST_WIDTH 1 49#define PMA_PMD_EXT_SSR_LBN 15 50#define PMA_PMD_EXT_SSR_WIDTH 1 51 52/* extended status register */ 53#define PMA_PMD_XSTATUS_REG 49153 54#define PMA_PMD_XSTAT_MDIX_LBN 14 55#define PMA_PMD_XSTAT_FLP_LBN (12) 56 57/* LED control register */ 58#define PMA_PMD_LED_CTRL_REG 49159 59#define PMA_PMA_LED_ACTIVITY_LBN (3) 60 61/* LED function override register */ 62#define PMA_PMD_LED_OVERR_REG 49161 63/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/ 64#define PMA_PMD_LED_LINK_LBN (0) 65#define PMA_PMD_LED_SPEED_LBN (2) 66#define PMA_PMD_LED_TX_LBN (4) 67#define PMA_PMD_LED_RX_LBN (6) 68/* Override settings */ 69#define PMA_PMD_LED_AUTO (0) /* H/W control */ 70#define PMA_PMD_LED_ON (1) 71#define PMA_PMD_LED_OFF (2) 72#define PMA_PMD_LED_FLASH (3) 73#define PMA_PMD_LED_MASK 3 74/* All LEDs under hardware control */ 75/* Green and Amber under hardware control, Red off */ 76#define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) 77 78#define PMA_PMD_SPEED_ENABLE_REG 49192 79#define PMA_PMD_100TX_ADV_LBN 1 80#define PMA_PMD_100TX_ADV_WIDTH 1 81#define PMA_PMD_1000T_ADV_LBN 2 82#define PMA_PMD_1000T_ADV_WIDTH 1 83#define PMA_PMD_10000T_ADV_LBN 3 84#define PMA_PMD_10000T_ADV_WIDTH 1 85#define PMA_PMD_SPEED_LBN 4 86#define PMA_PMD_SPEED_WIDTH 4 87 88/* Misc register defines */ 89#define PCS_CLOCK_CTRL_REG 55297 90#define PLL312_RST_N_LBN 2 91 92#define PCS_SOFT_RST2_REG 55302 93#define SERDES_RST_N_LBN 13 94#define XGXS_RST_N_LBN 12 95 96#define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */ 97#define CLK312_EN_LBN 3 98 99/* PHYXS registers */ 100#define PHYXS_XCONTROL_REG 49152 101#define PHYXS_RESET_LBN 15 102#define PHYXS_RESET_WIDTH 1 103 104#define PHYXS_TEST1 (49162) 105#define LOOPBACK_NEAR_LBN (8) 106#define LOOPBACK_NEAR_WIDTH (1) 107 108/* Boot status register */ 109#define PCS_BOOT_STATUS_REG 53248 110#define PCS_BOOT_FATAL_ERROR_LBN 0 111#define PCS_BOOT_PROGRESS_LBN 1 112#define PCS_BOOT_PROGRESS_WIDTH 2 113#define PCS_BOOT_PROGRESS_INIT 0 114#define PCS_BOOT_PROGRESS_WAIT_MDIO 1 115#define PCS_BOOT_PROGRESS_CHECKSUM 2 116#define PCS_BOOT_PROGRESS_JUMP 3 117#define PCS_BOOT_DOWNLOAD_WAIT_LBN 3 118#define PCS_BOOT_CODE_STARTED_LBN 4 119 120/* 100M/1G PHY registers */ 121#define GPHY_XCONTROL_REG 49152 122#define GPHY_ISOLATE_LBN 10 123#define GPHY_ISOLATE_WIDTH 1 124#define GPHY_DUPLEX_LBN 8 125#define GPHY_DUPLEX_WIDTH 1 126#define GPHY_LOOPBACK_NEAR_LBN 14 127#define GPHY_LOOPBACK_NEAR_WIDTH 1 128 129#define C22EXT_STATUS_REG 49153 130#define C22EXT_STATUS_LINK_LBN 2 131#define C22EXT_STATUS_LINK_WIDTH 1 132 133#define C22EXT_MSTSLV_CTRL 49161 134#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 135#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 136 137#define C22EXT_MSTSLV_STATUS 49162 138#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 139#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 140 141/* Time to wait between powering down the LNPGA and turning off the power 142 * rails */ 143#define LNPGA_PDOWN_WAIT (HZ / 5) 144 145struct tenxpress_phy_data { 146 enum efx_loopback_mode loopback_mode; 147 enum efx_phy_mode phy_mode; 148 int bad_lp_tries; 149}; 150 151static int tenxpress_init(struct efx_nic *efx) 152{ 153 /* Enable 312.5 MHz clock */ 154 efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG, 155 1 << CLK312_EN_LBN); 156 157 /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */ 158 efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG, 159 1 << PMA_PMA_LED_ACTIVITY_LBN, true); 160 efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, 161 SFX7101_PMA_PMD_LED_DEFAULT); 162 163 return 0; 164} 165 166static int tenxpress_phy_probe(struct efx_nic *efx) 167{ 168 struct tenxpress_phy_data *phy_data; 169 170 /* Allocate phy private storage */ 171 phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); 172 if (!phy_data) 173 return -ENOMEM; 174 efx->phy_data = phy_data; 175 phy_data->phy_mode = efx->phy_mode; 176 177 efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; 178 efx->mdio.mode_support = MDIO_SUPPORTS_C45; 179 180 efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; 181 182 efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | 183 ADVERTISED_10000baseT_Full); 184 185 return 0; 186} 187 188static int tenxpress_phy_init(struct efx_nic *efx) 189{ 190 int rc; 191 192 falcon_board(efx)->type->init_phy(efx); 193 194 if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { 195 rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); 196 if (rc < 0) 197 return rc; 198 199 rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS); 200 if (rc < 0) 201 return rc; 202 } 203 204 rc = tenxpress_init(efx); 205 if (rc < 0) 206 return rc; 207 208 /* Reinitialise flow control settings */ 209 efx_link_set_wanted_fc(efx, efx->wanted_fc); 210 efx_mdio_an_reconfigure(efx); 211 212 schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ 213 214 /* Let XGXS and SerDes out of reset */ 215 falcon_reset_xaui(efx); 216 217 return 0; 218} 219 220/* Perform a "special software reset" on the PHY. The caller is 221 * responsible for saving and restoring the PHY hardware registers 222 * properly, and masking/unmasking LASI */ 223static int tenxpress_special_reset(struct efx_nic *efx) 224{ 225 int rc, reg; 226 227 /* The XGMAC clock is driven from the SFX7101 312MHz clock, so 228 * a special software reset can glitch the XGMAC sufficiently for stats 229 * requests to fail. */ 230 falcon_stop_nic_stats(efx); 231 232 /* Initiate reset */ 233 reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG); 234 reg |= (1 << PMA_PMD_EXT_SSR_LBN); 235 efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); 236 237 mdelay(200); 238 239 /* Wait for the blocks to come out of reset */ 240 rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); 241 if (rc < 0) 242 goto out; 243 244 /* Try and reconfigure the device */ 245 rc = tenxpress_init(efx); 246 if (rc < 0) 247 goto out; 248 249 /* Wait for the XGXS state machine to churn */ 250 mdelay(10); 251out: 252 falcon_start_nic_stats(efx); 253 return rc; 254} 255 256static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok) 257{ 258 struct tenxpress_phy_data *pd = efx->phy_data; 259 bool bad_lp; 260 int reg; 261 262 if (link_ok) { 263 bad_lp = false; 264 } else { 265 /* Check that AN has started but not completed. */ 266 reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1); 267 if (!(reg & MDIO_AN_STAT1_LPABLE)) 268 return; /* LP status is unknown */ 269 bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE); 270 if (bad_lp) 271 pd->bad_lp_tries++; 272 } 273 274 /* Nothing to do if all is well and was previously so. */ 275 if (!pd->bad_lp_tries) 276 return; 277 278 /* Use the RX (red) LED as an error indicator once we've seen AN 279 * failure several times in a row, and also log a message. */ 280 if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) { 281 reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, 282 PMA_PMD_LED_OVERR_REG); 283 reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN); 284 if (!bad_lp) { 285 reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN; 286 } else { 287 reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN; 288 netif_err(efx, link, efx->net_dev, 289 "appears to be plugged into a port" 290 " that is not 10GBASE-T capable. The PHY" 291 " supports 10GBASE-T ONLY, so no link can" 292 " be established\n"); 293 } 294 efx_mdio_write(efx, MDIO_MMD_PMAPMD, 295 PMA_PMD_LED_OVERR_REG, reg); 296 pd->bad_lp_tries = bad_lp; 297 } 298} 299 300static bool sfx7101_link_ok(struct efx_nic *efx) 301{ 302 return efx_mdio_links_ok(efx, 303 MDIO_DEVS_PMAPMD | 304 MDIO_DEVS_PCS | 305 MDIO_DEVS_PHYXS); 306} 307 308static void tenxpress_ext_loopback(struct efx_nic *efx) 309{ 310 efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1, 311 1 << LOOPBACK_NEAR_LBN, 312 efx->loopback_mode == LOOPBACK_PHYXS); 313} 314 315static void tenxpress_low_power(struct efx_nic *efx) 316{ 317 efx_mdio_set_mmds_lpower( 318 efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER), 319 TENXPRESS_REQUIRED_DEVS); 320} 321 322static int tenxpress_phy_reconfigure(struct efx_nic *efx) 323{ 324 struct tenxpress_phy_data *phy_data = efx->phy_data; 325 bool phy_mode_change, loop_reset; 326 327 if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { 328 phy_data->phy_mode = efx->phy_mode; 329 return 0; 330 } 331 332 phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && 333 phy_data->phy_mode != PHY_MODE_NORMAL); 334 loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) || 335 LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); 336 337 if (loop_reset || phy_mode_change) { 338 tenxpress_special_reset(efx); 339 falcon_reset_xaui(efx); 340 } 341 342 tenxpress_low_power(efx); 343 efx_mdio_transmit_disable(efx); 344 efx_mdio_phy_reconfigure(efx); 345 tenxpress_ext_loopback(efx); 346 efx_mdio_an_reconfigure(efx); 347 348 phy_data->loopback_mode = efx->loopback_mode; 349 phy_data->phy_mode = efx->phy_mode; 350 351 return 0; 352} 353 354static void 355tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); 356 357/* Poll for link state changes */ 358static bool tenxpress_phy_poll(struct efx_nic *efx) 359{ 360 struct efx_link_state old_state = efx->link_state; 361 362 efx->link_state.up = sfx7101_link_ok(efx); 363 efx->link_state.speed = 10000; 364 efx->link_state.fd = true; 365 efx->link_state.fc = efx_mdio_get_pause(efx); 366 367 sfx7101_check_bad_lp(efx, efx->link_state.up); 368 369 return !efx_link_state_equal(&efx->link_state, &old_state); 370} 371 372static void sfx7101_phy_fini(struct efx_nic *efx) 373{ 374 int reg; 375 376 /* Power down the LNPGA */ 377 reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); 378 efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); 379 380 /* Waiting here ensures that the board fini, which can turn 381 * off the power to the PHY, won't get run until the LNPGA 382 * powerdown has been given long enough to complete. */ 383 schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ 384} 385 386static void tenxpress_phy_remove(struct efx_nic *efx) 387{ 388 kfree(efx->phy_data); 389 efx->phy_data = NULL; 390} 391 392 393/* Override the RX, TX and link LEDs */ 394void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) 395{ 396 int reg; 397 398 switch (mode) { 399 case EFX_LED_OFF: 400 reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) | 401 (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) | 402 (PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN); 403 break; 404 case EFX_LED_ON: 405 reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) | 406 (PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) | 407 (PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN); 408 break; 409 default: 410 reg = SFX7101_PMA_PMD_LED_DEFAULT; 411 break; 412 } 413 414 efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); 415} 416 417static const char *const sfx7101_test_names[] = { 418 "bist" 419}; 420 421static const char *sfx7101_test_name(struct efx_nic *efx, unsigned int index) 422{ 423 if (index < ARRAY_SIZE(sfx7101_test_names)) 424 return sfx7101_test_names[index]; 425 return NULL; 426} 427 428static int 429sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags) 430{ 431 int rc; 432 433 if (!(flags & ETH_TEST_FL_OFFLINE)) 434 return 0; 435 436 /* BIST is automatically run after a special software reset */ 437 rc = tenxpress_special_reset(efx); 438 results[0] = rc ? -1 : 1; 439 440 efx_mdio_an_reconfigure(efx); 441 442 return rc; 443} 444 445static void 446tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) 447{ 448 u32 adv = 0, lpa = 0; 449 int reg; 450 451 reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); 452 if (reg & MDIO_AN_10GBT_CTRL_ADV10G) 453 adv |= ADVERTISED_10000baseT_Full; 454 reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); 455 if (reg & MDIO_AN_10GBT_STAT_LP10G) 456 lpa |= ADVERTISED_10000baseT_Full; 457 458 mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa); 459 460 /* In loopback, the PHY automatically brings up the correct interface, 461 * but doesn't advertise the correct speed. So override it */ 462 if (LOOPBACK_EXTERNAL(efx)) 463 ethtool_cmd_speed_set(ecmd, SPEED_10000); 464} 465 466static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) 467{ 468 if (!ecmd->autoneg) 469 return -EINVAL; 470 471 return efx_mdio_set_settings(efx, ecmd); 472} 473 474static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) 475{ 476 efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, 477 MDIO_AN_10GBT_CTRL_ADV10G, 478 advertising & ADVERTISED_10000baseT_Full); 479} 480 481const struct efx_phy_operations falcon_sfx7101_phy_ops = { 482 .probe = tenxpress_phy_probe, 483 .init = tenxpress_phy_init, 484 .reconfigure = tenxpress_phy_reconfigure, 485 .poll = tenxpress_phy_poll, 486 .fini = sfx7101_phy_fini, 487 .remove = tenxpress_phy_remove, 488 .get_settings = tenxpress_get_settings, 489 .set_settings = tenxpress_set_settings, 490 .set_npage_adv = sfx7101_set_npage_adv, 491 .test_alive = efx_mdio_test_alive, 492 .test_name = sfx7101_test_name, 493 .run_tests = sfx7101_run_tests, 494}; 495