1/* 2 * Copyright (c) 2012 Mellanox Technologies. All rights reserved. 3 * 4 * This software is available to you under a choice of one of two 5 * licenses. You may choose to be licensed under the terms of the GNU 6 * General Public License (GPL) Version 2, available from the file 7 * COPYING in the main directory of this source tree, or the 8 * OpenIB.org BSD license below: 9 * 10 * Redistribution and use in source and binary forms, with or 11 * without modification, are permitted provided that the following 12 * conditions are met: 13 * 14 * - Redistributions of source code must retain the above 15 * copyright notice, this list of conditions and the following 16 * disclaimer. 17 * 18 * - Redistributions in binary form must reproduce the above 19 * copyright notice, this list of conditions and the following 20 * disclaimer in the documentation and/or other materials 21 * provided with the distribution. 22 * 23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 30 * SOFTWARE. 31 * 32 */ 33 34#include <linux/mlx4/device.h> 35#include <linux/clocksource.h> 36 37#include "mlx4_en.h" 38 39/* mlx4_en_read_clock - read raw cycle counter (to be used by time counter) 40 */ 41static cycle_t mlx4_en_read_clock(const struct cyclecounter *tc) 42{ 43 struct mlx4_en_dev *mdev = 44 container_of(tc, struct mlx4_en_dev, cycles); 45 struct mlx4_dev *dev = mdev->dev; 46 47 return mlx4_read_clock(dev) & tc->mask; 48} 49 50u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe) 51{ 52 u64 hi, lo; 53 struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; 54 55 lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); 56 hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; 57 58 return hi | lo; 59} 60 61void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev, 62 struct skb_shared_hwtstamps *hwts, 63 u64 timestamp) 64{ 65 unsigned long flags; 66 u64 nsec; 67 68 read_lock_irqsave(&mdev->clock_lock, flags); 69 nsec = timecounter_cyc2time(&mdev->clock, timestamp); 70 read_unlock_irqrestore(&mdev->clock_lock, flags); 71 72 memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); 73 hwts->hwtstamp = ns_to_ktime(nsec); 74} 75 76/** 77 * mlx4_en_remove_timestamp - disable PTP device 78 * @mdev: board private structure 79 * 80 * Stop the PTP support. 81 **/ 82void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) 83{ 84 if (mdev->ptp_clock) { 85 ptp_clock_unregister(mdev->ptp_clock); 86 mdev->ptp_clock = NULL; 87 mlx4_info(mdev, "removed PHC\n"); 88 } 89} 90 91void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev) 92{ 93 bool timeout = time_is_before_jiffies(mdev->last_overflow_check + 94 mdev->overflow_period); 95 unsigned long flags; 96 97 if (timeout) { 98 write_lock_irqsave(&mdev->clock_lock, flags); 99 timecounter_read(&mdev->clock); 100 write_unlock_irqrestore(&mdev->clock_lock, flags); 101 mdev->last_overflow_check = jiffies; 102 } 103} 104 105/** 106 * mlx4_en_phc_adjfreq - adjust the frequency of the hardware clock 107 * @ptp: ptp clock structure 108 * @delta: Desired frequency change in parts per billion 109 * 110 * Adjust the frequency of the PHC cycle counter by the indicated delta from 111 * the base frequency. 112 **/ 113static int mlx4_en_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) 114{ 115 u64 adj; 116 u32 diff, mult; 117 int neg_adj = 0; 118 unsigned long flags; 119 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 120 ptp_clock_info); 121 122 if (delta < 0) { 123 neg_adj = 1; 124 delta = -delta; 125 } 126 mult = mdev->nominal_c_mult; 127 adj = mult; 128 adj *= delta; 129 diff = div_u64(adj, 1000000000ULL); 130 131 write_lock_irqsave(&mdev->clock_lock, flags); 132 timecounter_read(&mdev->clock); 133 mdev->cycles.mult = neg_adj ? mult - diff : mult + diff; 134 write_unlock_irqrestore(&mdev->clock_lock, flags); 135 136 return 0; 137} 138 139/** 140 * mlx4_en_phc_adjtime - Shift the time of the hardware clock 141 * @ptp: ptp clock structure 142 * @delta: Desired change in nanoseconds 143 * 144 * Adjust the timer by resetting the timecounter structure. 145 **/ 146static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) 147{ 148 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 149 ptp_clock_info); 150 unsigned long flags; 151 152 write_lock_irqsave(&mdev->clock_lock, flags); 153 timecounter_adjtime(&mdev->clock, delta); 154 write_unlock_irqrestore(&mdev->clock_lock, flags); 155 156 return 0; 157} 158 159/** 160 * mlx4_en_phc_gettime - Reads the current time from the hardware clock 161 * @ptp: ptp clock structure 162 * @ts: timespec structure to hold the current time value 163 * 164 * Read the timecounter and return the correct value in ns after converting 165 * it into a struct timespec. 166 **/ 167static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp, 168 struct timespec64 *ts) 169{ 170 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 171 ptp_clock_info); 172 unsigned long flags; 173 u64 ns; 174 175 write_lock_irqsave(&mdev->clock_lock, flags); 176 ns = timecounter_read(&mdev->clock); 177 write_unlock_irqrestore(&mdev->clock_lock, flags); 178 179 *ts = ns_to_timespec64(ns); 180 181 return 0; 182} 183 184/** 185 * mlx4_en_phc_settime - Set the current time on the hardware clock 186 * @ptp: ptp clock structure 187 * @ts: timespec containing the new time for the cycle counter 188 * 189 * Reset the timecounter to use a new base value instead of the kernel 190 * wall timer value. 191 **/ 192static int mlx4_en_phc_settime(struct ptp_clock_info *ptp, 193 const struct timespec64 *ts) 194{ 195 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 196 ptp_clock_info); 197 u64 ns = timespec64_to_ns(ts); 198 unsigned long flags; 199 200 /* reset the timecounter */ 201 write_lock_irqsave(&mdev->clock_lock, flags); 202 timecounter_init(&mdev->clock, &mdev->cycles, ns); 203 write_unlock_irqrestore(&mdev->clock_lock, flags); 204 205 return 0; 206} 207 208/** 209 * mlx4_en_phc_enable - enable or disable an ancillary feature 210 * @ptp: ptp clock structure 211 * @request: Desired resource to enable or disable 212 * @on: Caller passes one to enable or zero to disable 213 * 214 * Enable (or disable) ancillary features of the PHC subsystem. 215 * Currently, no ancillary features are supported. 216 **/ 217static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp, 218 struct ptp_clock_request __always_unused *request, 219 int __always_unused on) 220{ 221 return -EOPNOTSUPP; 222} 223 224static const struct ptp_clock_info mlx4_en_ptp_clock_info = { 225 .owner = THIS_MODULE, 226 .max_adj = 100000000, 227 .n_alarm = 0, 228 .n_ext_ts = 0, 229 .n_per_out = 0, 230 .n_pins = 0, 231 .pps = 0, 232 .adjfreq = mlx4_en_phc_adjfreq, 233 .adjtime = mlx4_en_phc_adjtime, 234 .gettime64 = mlx4_en_phc_gettime, 235 .settime64 = mlx4_en_phc_settime, 236 .enable = mlx4_en_phc_enable, 237}; 238 239#define MLX4_EN_WRAP_AROUND_SEC 10ULL 240 241/* This function calculates the max shift that enables the user range 242 * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register. 243 */ 244static u32 freq_to_shift(u16 freq) 245{ 246 u32 freq_khz = freq * 1000; 247 u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC; 248 u64 max_val_cycles_rounded = is_power_of_2(max_val_cycles + 1) ? 249 max_val_cycles : roundup_pow_of_two(max_val_cycles) - 1; 250 /* calculate max possible multiplier in order to fit in 64bit */ 251 u64 max_mul = div_u64(0xffffffffffffffffULL, max_val_cycles_rounded); 252 253 /* This comes from the reverse of clocksource_khz2mult */ 254 return ilog2(div_u64(max_mul * freq_khz, 1000000)); 255} 256 257void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) 258{ 259 struct mlx4_dev *dev = mdev->dev; 260 unsigned long flags; 261 u64 ns, zero = 0; 262 263 /* mlx4_en_init_timestamp is called for each netdev. 264 * mdev->ptp_clock is common for all ports, skip initialization if 265 * was done for other port. 266 */ 267 if (mdev->ptp_clock) 268 return; 269 270 rwlock_init(&mdev->clock_lock); 271 272 memset(&mdev->cycles, 0, sizeof(mdev->cycles)); 273 mdev->cycles.read = mlx4_en_read_clock; 274 mdev->cycles.mask = CLOCKSOURCE_MASK(48); 275 mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock); 276 mdev->cycles.mult = 277 clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); 278 mdev->nominal_c_mult = mdev->cycles.mult; 279 280 write_lock_irqsave(&mdev->clock_lock, flags); 281 timecounter_init(&mdev->clock, &mdev->cycles, 282 ktime_to_ns(ktime_get_real())); 283 write_unlock_irqrestore(&mdev->clock_lock, flags); 284 285 /* Calculate period in seconds to call the overflow watchdog - to make 286 * sure counter is checked at least once every wrap around. 287 */ 288 ns = cyclecounter_cyc2ns(&mdev->cycles, mdev->cycles.mask, zero, &zero); 289 do_div(ns, NSEC_PER_SEC / 2 / HZ); 290 mdev->overflow_period = ns; 291 292 /* Configure the PHC */ 293 mdev->ptp_clock_info = mlx4_en_ptp_clock_info; 294 snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp"); 295 296 mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info, 297 &mdev->pdev->dev); 298 if (IS_ERR(mdev->ptp_clock)) { 299 mdev->ptp_clock = NULL; 300 mlx4_err(mdev, "ptp_clock_register failed\n"); 301 } else { 302 mlx4_info(mdev, "registered PHC clock\n"); 303 } 304 305} 306