1/* 2 * Copyright 2008-2010 Cisco Systems, Inc. All rights reserved. 3 * Copyright 2007 Nuova Systems, Inc. All rights reserved. 4 * 5 * This program is free software; you may redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; version 2 of the License. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 10 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 11 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 12 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 13 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 14 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 15 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 16 * SOFTWARE. 17 * 18 */ 19 20#ifndef _VNIC_DEVCMD_H_ 21#define _VNIC_DEVCMD_H_ 22 23#define _CMD_NBITS 14 24#define _CMD_VTYPEBITS 10 25#define _CMD_FLAGSBITS 6 26#define _CMD_DIRBITS 2 27 28#define _CMD_NMASK ((1 << _CMD_NBITS)-1) 29#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) 30#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) 31#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) 32 33#define _CMD_NSHIFT 0 34#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) 35#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) 36#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) 37 38/* 39 * Direction bits (from host perspective). 40 */ 41#define _CMD_DIR_NONE 0U 42#define _CMD_DIR_WRITE 1U 43#define _CMD_DIR_READ 2U 44#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) 45 46/* 47 * Flag bits. 48 */ 49#define _CMD_FLAGS_NONE 0U 50#define _CMD_FLAGS_NOWAIT 1U 51 52/* 53 * vNIC type bits. 54 */ 55#define _CMD_VTYPE_NONE 0U 56#define _CMD_VTYPE_ENET 1U 57#define _CMD_VTYPE_FC 2U 58#define _CMD_VTYPE_SCSI 4U 59#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) 60 61/* 62 * Used to create cmds.. 63*/ 64#define _CMDCF(dir, flags, vtype, nr) \ 65 (((dir) << _CMD_DIRSHIFT) | \ 66 ((flags) << _CMD_FLAGSSHIFT) | \ 67 ((vtype) << _CMD_VTYPESHIFT) | \ 68 ((nr) << _CMD_NSHIFT)) 69#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) 70#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) 71 72/* 73 * Used to decode cmds.. 74*/ 75#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) 76#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) 77#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) 78#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) 79 80enum vnic_devcmd_cmd { 81 CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), 82 83 /* 84 * mcpu fw info in mem: 85 * in: 86 * (u64)a0=paddr to struct vnic_devcmd_fw_info 87 * action: 88 * Fills in struct vnic_devcmd_fw_info (128 bytes) 89 * note: 90 * An old definition of CMD_MCPU_FW_INFO 91 */ 92 CMD_MCPU_FW_INFO_OLD = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), 93 94 /* 95 * mcpu fw info in mem: 96 * in: 97 * (u64)a0=paddr to struct vnic_devcmd_fw_info 98 * (u16)a1=size of the structure 99 * out: 100 * (u16)a1=0 for in:a1 = 0, 101 * data size actually written for other values. 102 * action: 103 * Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0, 104 * first in:a1 bytes for 0 < in:a1 <= 132, 105 * 132 bytes for other values of in:a1. 106 * note: 107 * CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1 108 * for source compatibility. 109 */ 110 CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1), 111 112 /* dev-specific block member: 113 * in: (u16)a0=offset,(u8)a1=size 114 * out: a0=value */ 115 CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), 116 117 /* stats clear */ 118 CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), 119 120 /* stats dump in mem: (u64)a0=paddr to stats area, 121 * (u16)a1=sizeof stats area */ 122 CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), 123 124 /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ 125 CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), 126 127 /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */ 128 CMD_PACKET_FILTER_ALL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7), 129 130 /* hang detection notification */ 131 CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), 132 133 /* MAC address in (u48)a0 */ 134 CMD_GET_MAC_ADDR = _CMDC(_CMD_DIR_READ, 135 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), 136 137 /* add addr from (u48)a0 */ 138 CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, 139 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), 140 141 /* del addr from (u48)a0 */ 142 CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, 143 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), 144 145 /* add VLAN id in (u16)a0 */ 146 CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), 147 148 /* del VLAN id in (u16)a0 */ 149 CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), 150 151 /* nic_cfg in (u32)a0 */ 152 CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), 153 154 /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ 155 CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), 156 157 /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ 158 CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), 159 160 /* initiate softreset */ 161 CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), 162 163 /* softreset status: 164 * out: a0=0 reset complete, a0=1 reset in progress */ 165 CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), 166 167 /* set struct vnic_devcmd_notify buffer in mem: 168 * in: 169 * (u64)a0=paddr to notify (set paddr=0 to unset) 170 * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) 171 * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) 172 * out: 173 * (u32)a1 = effective size 174 */ 175 CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), 176 177 /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, 178 * (u8)a1=PXENV_UNDI_xxx */ 179 CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), 180 181 /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ 182 CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), 183 184 /* open status: 185 * out: a0=0 open complete, a0=1 open in progress */ 186 CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), 187 188 /* close vnic */ 189 CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), 190 191 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ 192/***** Replaced by CMD_INIT *****/ 193 CMD_INIT_v1 = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), 194 195 /* variant of CMD_INIT, with provisioning info 196 * (u64)a0=paddr of vnic_devcmd_provinfo 197 * (u32)a1=sizeof provision info */ 198 CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), 199 200 /* enable virtual link */ 201 CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), 202 203 /* enable virtual link, waiting variant. */ 204 CMD_ENABLE_WAIT = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), 205 206 /* disable virtual link */ 207 CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), 208 209 /* stats dump sum of all vnic stats on same uplink in mem: 210 * (u64)a0=paddr 211 * (u16)a1=sizeof stats area */ 212 CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), 213 214 /* init status: 215 * out: a0=0 init complete, a0=1 init in progress 216 * if a0=0, a1=errno */ 217 CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), 218 219 /* INT13 API: (u64)a0=paddr to vnic_int13_params struct 220 * (u32)a1=INT13_CMD_xxx */ 221 CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), 222 223 /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ 224 CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), 225 226 /* undo initialize of virtual link */ 227 CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), 228 229 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ 230 CMD_INIT = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35), 231 232 /* check fw capability of a cmd: 233 * in: (u32)a0=cmd 234 * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */ 235 CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36), 236 237 /* persistent binding info 238 * in: (u64)a0=paddr of arg 239 * (u32)a1=CMD_PERBI_XXX */ 240 CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37), 241 242 /* Interrupt Assert Register functionality 243 * in: (u16)a0=interrupt number to assert 244 */ 245 CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38), 246 247 /* initiate hangreset, like softreset after hang detected */ 248 CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39), 249 250 /* hangreset status: 251 * out: a0=0 reset complete, a0=1 reset in progress */ 252 CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40), 253 254 /* 255 * Set hw ingress packet vlan rewrite mode: 256 * in: (u32)a0=new vlan rewrite mode 257 * out: (u32)a0=old vlan rewrite mode */ 258 CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41), 259 260 /* 261 * in: (u16)a0=bdf of target vnic 262 * (u32)a1=cmd to proxy 263 * a2-a15=args to cmd in a1 264 * out: (u32)a0=status of proxied cmd 265 * a1-a15=out args of proxied cmd */ 266 CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42), 267 268 /* 269 * As for BY_BDF except a0 is index of hvnlink subordinate vnic 270 * or SR-IOV virtual vnic 271 */ 272 CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43), 273 274 /* 275 * For HPP toggle: 276 * adapter-info-get 277 * in: (u64)a0=phsical address of buffer passed in from caller. 278 * (u16)a1=size of buffer specified in a0. 279 * out: (u64)a0=phsical address of buffer passed in from caller. 280 * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or 281 * 0 if no VIF-CONFIG-INFO TLV was ever received. */ 282 CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44), 283 284 /* INT13 API: (u64)a0=paddr to vnic_int13_params struct 285 * (u32)a1=INT13_CMD_xxx 286 */ 287 CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45), 288 289 /* Set default vlan: 290 * in: (u16)a0=new default vlan 291 * (u16)a1=zero for overriding vlan with param a0, 292 * non-zero for resetting vlan to the default 293 * out: (u16)a0=old default vlan 294 */ 295 CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46), 296 297 /* init_prov_info2: 298 * Variant of CMD_INIT_PROV_INFO, where it will not try to enable 299 * the vnic until CMD_ENABLE2 is issued. 300 * (u64)a0=paddr of vnic_devcmd_provinfo 301 * (u32)a1=sizeof provision info 302 */ 303 CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47), 304 305 /* enable2: 306 * (u32)a0=0 ==> standby 307 * =CMD_ENABLE2_ACTIVE ==> active 308 */ 309 CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48), 310 311 /* 312 * cmd_status: 313 * Returns the status of the specified command 314 * Input: 315 * a0 = command for which status is being queried. 316 * Possible values are: 317 * CMD_SOFT_RESET 318 * CMD_HANG_RESET 319 * CMD_OPEN 320 * CMD_INIT 321 * CMD_INIT_PROV_INFO 322 * CMD_DEINIT 323 * CMD_INIT_PROV_INFO2 324 * CMD_ENABLE2 325 * Output: 326 * if status == STAT_ERROR 327 * a0 = ERR_ENOTSUPPORTED - status for command in a0 is 328 * not supported 329 * if status == STAT_NONE 330 * a0 = status of the devcmd specified in a0 as follows. 331 * ERR_SUCCESS - command in a0 completed successfully 332 * ERR_EINPROGRESS - command in a0 is still in progress 333 */ 334 CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49), 335 336 /* 337 * Returns interrupt coalescing timer conversion factors. 338 * After calling this devcmd, ENIC driver can convert 339 * interrupt coalescing timer in usec into CPU cycles as follows: 340 * 341 * intr_timer_cycles = intr_timer_usec * multiplier / divisor 342 * 343 * Interrupt coalescing timer in usecs can be obtained from 344 * CPU cycles as follows: 345 * 346 * intr_timer_usec = intr_timer_cycles * divisor / multiplier 347 * 348 * in: none 349 * out: (u32)a0 = multiplier 350 * (u32)a1 = divisor 351 * (u32)a2 = maximum timer value in usec 352 */ 353 CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50), 354 355 /* 356 * Set the predefined mac address as default 357 * in: 358 * (u48)a0 = mac addr 359 */ 360 CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55), 361 362 /* Update the provisioning info of the given VIF 363 * (u64)a0=paddr of vnic_devcmd_provinfo 364 * (u32)a1=sizeof provision info 365 */ 366 CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56), 367 368 /* Initialization for the devcmd2 interface. 369 * in: (u64) a0 = host result buffer physical address 370 * in: (u16) a1 = number of entries in result buffer 371 */ 372 CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57), 373 374 /* Add a filter. 375 * in: (u64) a0= filter address 376 * (u32) a1= size of filter 377 * out: (u32) a0=filter identifier 378 */ 379 CMD_ADD_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 58), 380 381 /* Delete a filter. 382 * in: (u32) a0=filter identifier 383 */ 384 CMD_DEL_FILTER = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 59), 385 386 /* Enable a Queue Pair in User space NIC 387 * in: (u32) a0=Queue Pair number 388 * (u32) a1= command 389 */ 390 CMD_QP_ENABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 60), 391 392 /* Disable a Queue Pair in User space NIC 393 * in: (u32) a0=Queue Pair number 394 * (u32) a1= command 395 */ 396 CMD_QP_DISABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 61), 397 398 /* Stats dump Queue Pair in User space NIC 399 * in: (u32) a0=Queue Pair number 400 * (u64) a1=host buffer addr for status dump 401 * (u32) a2=length of the buffer 402 */ 403 CMD_QP_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 62), 404 405 /* Clear stats for Queue Pair in User space NIC 406 * in: (u32) a0=Queue Pair number 407 */ 408 CMD_QP_STATS_CLEAR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 63), 409}; 410 411/* CMD_ENABLE2 flags */ 412#define CMD_ENABLE2_STANDBY 0x0 413#define CMD_ENABLE2_ACTIVE 0x1 414 415/* flags for CMD_OPEN */ 416#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ 417 418/* flags for CMD_INIT */ 419#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ 420 421/* flags for CMD_PACKET_FILTER */ 422#define CMD_PFILTER_DIRECTED 0x01 423#define CMD_PFILTER_MULTICAST 0x02 424#define CMD_PFILTER_BROADCAST 0x04 425#define CMD_PFILTER_PROMISCUOUS 0x08 426#define CMD_PFILTER_ALL_MULTICAST 0x10 427 428/* Commands for CMD_QP_ENABLE/CM_QP_DISABLE */ 429#define CMD_QP_RQWQ 0x0 430 431/* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */ 432#define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK 0 433#define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN 1 434#define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN 2 435#define IG_VLAN_REWRITE_MODE_PASS_THRU 3 436 437enum vnic_devcmd_status { 438 STAT_NONE = 0, 439 STAT_BUSY = 1 << 0, /* cmd in progress */ 440 STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ 441}; 442 443enum vnic_devcmd_error { 444 ERR_SUCCESS = 0, 445 ERR_EINVAL = 1, 446 ERR_EFAULT = 2, 447 ERR_EPERM = 3, 448 ERR_EBUSY = 4, 449 ERR_ECMDUNKNOWN = 5, 450 ERR_EBADSTATE = 6, 451 ERR_ENOMEM = 7, 452 ERR_ETIMEDOUT = 8, 453 ERR_ELINKDOWN = 9, 454 ERR_EMAXRES = 10, 455 ERR_ENOTSUPPORTED = 11, 456 ERR_EINPROGRESS = 12, 457 ERR_MAX 458}; 459 460/* 461 * note: hw_version and asic_rev refer to the same thing, 462 * but have different formats. hw_version is 463 * a 32-byte string (e.g. "A2") and asic_rev is 464 * a 16-bit integer (e.g. 0xA2). 465 */ 466struct vnic_devcmd_fw_info { 467 char fw_version[32]; 468 char fw_build[32]; 469 char hw_version[32]; 470 char hw_serial_number[32]; 471 u16 asic_type; 472 u16 asic_rev; 473}; 474 475struct vnic_devcmd_notify { 476 u32 csum; /* checksum over following words */ 477 478 u32 link_state; /* link up == 1 */ 479 u32 port_speed; /* effective port speed (rate limit) */ 480 u32 mtu; /* MTU */ 481 u32 msglvl; /* requested driver msg lvl */ 482 u32 uif; /* uplink interface */ 483 u32 status; /* status bits (see VNIC_STF_*) */ 484 u32 error; /* error code (see ERR_*) for first ERR */ 485 u32 link_down_cnt; /* running count of link down transitions */ 486 u32 perbi_rebuild_cnt; /* running count of perbi rebuilds */ 487}; 488#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ 489#define VNIC_STF_STD_PAUSE 0x0002 /* standard link-level pause on */ 490#define VNIC_STF_PFC_PAUSE 0x0004 /* priority flow control pause on */ 491/* all supported status flags */ 492#define VNIC_STF_ALL (VNIC_STF_FATAL_ERR |\ 493 VNIC_STF_STD_PAUSE |\ 494 VNIC_STF_PFC_PAUSE |\ 495 0) 496 497struct vnic_devcmd_provinfo { 498 u8 oui[3]; 499 u8 type; 500 u8 data[0]; 501}; 502 503/* These are used in flags field of different filters to denote 504 * valid fields used. 505 */ 506#define FILTER_FIELD_VALID(fld) (1 << (fld - 1)) 507 508#define FILTER_FIELDS_USNIC ( \ 509 FILTER_FIELD_VALID(1) | \ 510 FILTER_FIELD_VALID(2) | \ 511 FILTER_FIELD_VALID(3) | \ 512 FILTER_FIELD_VALID(4)) 513 514#define FILTER_FIELDS_IPV4_5TUPLE ( \ 515 FILTER_FIELD_VALID(1) | \ 516 FILTER_FIELD_VALID(2) | \ 517 FILTER_FIELD_VALID(3) | \ 518 FILTER_FIELD_VALID(4) | \ 519 FILTER_FIELD_VALID(5)) 520 521#define FILTER_FIELDS_MAC_VLAN ( \ 522 FILTER_FIELD_VALID(1) | \ 523 FILTER_FIELD_VALID(2)) 524 525#define FILTER_FIELD_USNIC_VLAN FILTER_FIELD_VALID(1) 526#define FILTER_FIELD_USNIC_ETHTYPE FILTER_FIELD_VALID(2) 527#define FILTER_FIELD_USNIC_PROTO FILTER_FIELD_VALID(3) 528#define FILTER_FIELD_USNIC_ID FILTER_FIELD_VALID(4) 529 530struct filter_usnic_id { 531 u32 flags; 532 u16 vlan; 533 u16 ethtype; 534 u8 proto_version; 535 u32 usnic_id; 536} __packed; 537 538#define FILTER_FIELD_5TUP_PROTO FILTER_FIELD_VALID(1) 539#define FILTER_FIELD_5TUP_SRC_AD FILTER_FIELD_VALID(2) 540#define FILTER_FIELD_5TUP_DST_AD FILTER_FIELD_VALID(3) 541#define FILTER_FIELD_5TUP_SRC_PT FILTER_FIELD_VALID(4) 542#define FILTER_FIELD_5TUP_DST_PT FILTER_FIELD_VALID(5) 543 544/* Enums for the protocol field. */ 545enum protocol_e { 546 PROTO_UDP = 0, 547 PROTO_TCP = 1, 548}; 549 550struct filter_ipv4_5tuple { 551 u32 flags; 552 u32 protocol; 553 u32 src_addr; 554 u32 dst_addr; 555 u16 src_port; 556 u16 dst_port; 557} __packed; 558 559#define FILTER_FIELD_VMQ_VLAN FILTER_FIELD_VALID(1) 560#define FILTER_FIELD_VMQ_MAC FILTER_FIELD_VALID(2) 561 562struct filter_mac_vlan { 563 u32 flags; 564 u16 vlan; 565 u8 mac_addr[6]; 566} __packed; 567 568/* Specifies the filter_action type. */ 569enum { 570 FILTER_ACTION_RQ_STEERING = 0, 571 FILTER_ACTION_MAX 572}; 573 574struct filter_action { 575 u32 type; 576 union { 577 u32 rq_idx; 578 } u; 579} __packed; 580 581/* Specifies the filter type. */ 582enum filter_type { 583 FILTER_USNIC_ID = 0, 584 FILTER_IPV4_5TUPLE = 1, 585 FILTER_MAC_VLAN = 2, 586 FILTER_MAX 587}; 588 589struct filter { 590 u32 type; 591 union { 592 struct filter_usnic_id usnic; 593 struct filter_ipv4_5tuple ipv4; 594 struct filter_mac_vlan mac_vlan; 595 } u; 596} __packed; 597 598enum { 599 CLSF_TLV_FILTER = 0, 600 CLSF_TLV_ACTION = 1, 601}; 602 603/* Maximum size of buffer to CMD_ADD_FILTER */ 604#define FILTER_MAX_BUF_SIZE 100 605 606struct filter_tlv { 607 u_int32_t type; 608 u_int32_t length; 609 u_int32_t val[0]; 610}; 611 612enum { 613 CLSF_ADD = 0, 614 CLSF_DEL = 1, 615}; 616 617/* 618 * Writing cmd register causes STAT_BUSY to get set in status register. 619 * When cmd completes, STAT_BUSY will be cleared. 620 * 621 * If cmd completed successfully STAT_ERROR will be clear 622 * and args registers contain cmd-specific results. 623 * 624 * If cmd error, STAT_ERROR will be set and args[0] contains error code. 625 * 626 * status register is read-only. While STAT_BUSY is set, 627 * all other register contents are read-only. 628 */ 629 630/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ 631#define VNIC_DEVCMD_NARGS 15 632struct vnic_devcmd { 633 u32 status; /* RO */ 634 u32 cmd; /* RW */ 635 u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ 636}; 637 638#define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */ 639 640#define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS 641struct vnic_devcmd2 { 642 u16 pad; 643 u16 flags; 644 u32 cmd; 645 u64 args[VNIC_DEVCMD2_NARGS]; 646}; 647 648#define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS 649struct devcmd2_result { 650 u64 results[VNIC_DEVCMD2_NRESULTS]; 651 u32 pad; 652 u16 completed_index; 653 u8 error; 654 u8 color; 655}; 656 657#define DEVCMD2_RING_SIZE 32 658#define DEVCMD2_DESC_SIZE 128 659 660#endif /* _VNIC_DEVCMD_H_ */ 661