1/***************************************************************************** 2 * * 3 * File: mv88x201x.c * 4 * $Revision: 1.12 $ * 5 * $Date: 2005/04/15 19:27:14 $ * 6 * Description: * 7 * Marvell PHY (mv88x201x) functionality. * 8 * part of the Chelsio 10Gb Ethernet Driver. * 9 * * 10 * This program is free software; you can redistribute it and/or modify * 11 * it under the terms of the GNU General Public License, version 2, as * 12 * published by the Free Software Foundation. * 13 * * 14 * You should have received a copy of the GNU General Public License along * 15 * with this program; if not, see <http://www.gnu.org/licenses/>. * 16 * * 17 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * 18 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * 19 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * 20 * * 21 * http://www.chelsio.com * 22 * * 23 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * 24 * All rights reserved. * 25 * * 26 * Maintainers: maintainers@chelsio.com * 27 * * 28 * Authors: Dimitrios Michailidis <dm@chelsio.com> * 29 * Tina Yang <tainay@chelsio.com> * 30 * Felix Marti <felix@chelsio.com> * 31 * Scott Bardone <sbardone@chelsio.com> * 32 * Kurt Ottaway <kottaway@chelsio.com> * 33 * Frank DiMambro <frank@chelsio.com> * 34 * * 35 * History: * 36 * * 37 ****************************************************************************/ 38 39#include "cphy.h" 40#include "elmer0.h" 41 42/* 43 * The 88x2010 Rev C. requires some link status registers * to be read 44 * twice in order to get the right values. Future * revisions will fix 45 * this problem and then this macro * can disappear. 46 */ 47#define MV88x2010_LINK_STATUS_BUGS 1 48 49static int led_init(struct cphy *cphy) 50{ 51 /* Setup the LED registers so we can turn on/off. 52 * Writing these bits maps control to another 53 * register. mmd(0x1) addr(0x7) 54 */ 55 cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8304, 0xdddd); 56 return 0; 57} 58 59static int led_link(struct cphy *cphy, u32 do_enable) 60{ 61 u32 led = 0; 62#define LINK_ENABLE_BIT 0x1 63 64 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, &led); 65 66 if (do_enable & LINK_ENABLE_BIT) { 67 led |= LINK_ENABLE_BIT; 68 cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led); 69 } else { 70 led &= ~LINK_ENABLE_BIT; 71 cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led); 72 } 73 return 0; 74} 75 76/* Port Reset */ 77static int mv88x201x_reset(struct cphy *cphy, int wait) 78{ 79 /* This can be done through registers. It is not required since 80 * a full chip reset is used. 81 */ 82 return 0; 83} 84 85static int mv88x201x_interrupt_enable(struct cphy *cphy) 86{ 87 /* Enable PHY LASI interrupts. */ 88 cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 89 MDIO_PMA_LASI_LSALARM); 90 91 /* Enable Marvell interrupts through Elmer0. */ 92 if (t1_is_asic(cphy->adapter)) { 93 u32 elmer; 94 95 t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); 96 elmer |= ELMER0_GP_BIT6; 97 t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); 98 } 99 return 0; 100} 101 102static int mv88x201x_interrupt_disable(struct cphy *cphy) 103{ 104 /* Disable PHY LASI interrupts. */ 105 cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0); 106 107 /* Disable Marvell interrupts through Elmer0. */ 108 if (t1_is_asic(cphy->adapter)) { 109 u32 elmer; 110 111 t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); 112 elmer &= ~ELMER0_GP_BIT6; 113 t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); 114 } 115 return 0; 116} 117 118static int mv88x201x_interrupt_clear(struct cphy *cphy) 119{ 120 u32 elmer; 121 u32 val; 122 123#ifdef MV88x2010_LINK_STATUS_BUGS 124 /* Required to read twice before clear takes affect. */ 125 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val); 126 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val); 127 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val); 128 129 /* Read this register after the others above it else 130 * the register doesn't clear correctly. 131 */ 132 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val); 133#endif 134 135 /* Clear link status. */ 136 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val); 137 /* Clear PHY LASI interrupts. */ 138 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val); 139 140#ifdef MV88x2010_LINK_STATUS_BUGS 141 /* Do it again. */ 142 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val); 143 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val); 144#endif 145 146 /* Clear Marvell interrupts through Elmer0. */ 147 if (t1_is_asic(cphy->adapter)) { 148 t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); 149 elmer |= ELMER0_GP_BIT6; 150 t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); 151 } 152 return 0; 153} 154 155static int mv88x201x_interrupt_handler(struct cphy *cphy) 156{ 157 /* Clear interrupts */ 158 mv88x201x_interrupt_clear(cphy); 159 160 /* We have only enabled link change interrupts and so 161 * cphy_cause must be a link change interrupt. 162 */ 163 return cphy_cause_link_change; 164} 165 166static int mv88x201x_set_loopback(struct cphy *cphy, int on) 167{ 168 return 0; 169} 170 171static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, 172 int *speed, int *duplex, int *fc) 173{ 174 u32 val = 0; 175 176 if (link_ok) { 177 /* Read link status. */ 178 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val); 179 val &= MDIO_STAT1_LSTATUS; 180 *link_ok = (val == MDIO_STAT1_LSTATUS); 181 /* Turn on/off Link LED */ 182 led_link(cphy, *link_ok); 183 } 184 if (speed) 185 *speed = SPEED_10000; 186 if (duplex) 187 *duplex = DUPLEX_FULL; 188 if (fc) 189 *fc = PAUSE_RX | PAUSE_TX; 190 return 0; 191} 192 193static void mv88x201x_destroy(struct cphy *cphy) 194{ 195 kfree(cphy); 196} 197 198static struct cphy_ops mv88x201x_ops = { 199 .destroy = mv88x201x_destroy, 200 .reset = mv88x201x_reset, 201 .interrupt_enable = mv88x201x_interrupt_enable, 202 .interrupt_disable = mv88x201x_interrupt_disable, 203 .interrupt_clear = mv88x201x_interrupt_clear, 204 .interrupt_handler = mv88x201x_interrupt_handler, 205 .get_link_status = mv88x201x_get_link_status, 206 .set_loopback = mv88x201x_set_loopback, 207 .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | 208 MDIO_DEVS_PHYXS | MDIO_DEVS_WIS), 209}; 210 211static struct cphy *mv88x201x_phy_create(struct net_device *dev, int phy_addr, 212 const struct mdio_ops *mdio_ops) 213{ 214 u32 val; 215 struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); 216 217 if (!cphy) 218 return NULL; 219 220 cphy_init(cphy, dev, phy_addr, &mv88x201x_ops, mdio_ops); 221 222 /* Commands the PHY to enable XFP's clock. */ 223 cphy_mdio_read(cphy, MDIO_MMD_PCS, 0x8300, &val); 224 cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8300, val | 1); 225 226 /* Clear link status. Required because of a bug in the PHY. */ 227 cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT2, &val); 228 cphy_mdio_read(cphy, MDIO_MMD_PCS, MDIO_STAT2, &val); 229 230 /* Allows for Link,Ack LED turn on/off */ 231 led_init(cphy); 232 return cphy; 233} 234 235/* Chip Reset */ 236static int mv88x201x_phy_reset(adapter_t *adapter) 237{ 238 u32 val; 239 240 t1_tpi_read(adapter, A_ELMER0_GPO, &val); 241 val &= ~4; 242 t1_tpi_write(adapter, A_ELMER0_GPO, val); 243 msleep(100); 244 245 t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); 246 msleep(1000); 247 248 /* Now lets enable the Laser. Delay 100us */ 249 t1_tpi_read(adapter, A_ELMER0_GPO, &val); 250 val |= 0x8000; 251 t1_tpi_write(adapter, A_ELMER0_GPO, val); 252 udelay(100); 253 return 0; 254} 255 256const struct gphy t1_mv88x201x_ops = { 257 .create = mv88x201x_phy_create, 258 .reset = mv88x201x_phy_reset 259}; 260