1/* bnx2x_main.c: QLogic Everest network driver. 2 * 3 * Copyright (c) 2007-2013 Broadcom Corporation 4 * Copyright (c) 2014 QLogic Corporation 5 * All rights reserved 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation. 10 * 11 * Maintained by: Ariel Elior <ariel.elior@qlogic.com> 12 * Written by: Eliezer Tamir 13 * Based on code from Michael Chan's bnx2 driver 14 * UDP CSUM errata workaround by Arik Gendelman 15 * Slowpath and fastpath rework by Vladislav Zolotarov 16 * Statistics and Link management by Yitchak Gertner 17 * 18 */ 19 20#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 21 22#include <linux/module.h> 23#include <linux/moduleparam.h> 24#include <linux/kernel.h> 25#include <linux/device.h> /* for dev_info() */ 26#include <linux/timer.h> 27#include <linux/errno.h> 28#include <linux/ioport.h> 29#include <linux/slab.h> 30#include <linux/interrupt.h> 31#include <linux/pci.h> 32#include <linux/aer.h> 33#include <linux/init.h> 34#include <linux/netdevice.h> 35#include <linux/etherdevice.h> 36#include <linux/skbuff.h> 37#include <linux/dma-mapping.h> 38#include <linux/bitops.h> 39#include <linux/irq.h> 40#include <linux/delay.h> 41#include <asm/byteorder.h> 42#include <linux/time.h> 43#include <linux/ethtool.h> 44#include <linux/mii.h> 45#include <linux/if_vlan.h> 46#include <linux/crash_dump.h> 47#include <net/ip.h> 48#include <net/ipv6.h> 49#include <net/tcp.h> 50#include <net/vxlan.h> 51#include <net/checksum.h> 52#include <net/ip6_checksum.h> 53#include <linux/workqueue.h> 54#include <linux/crc32.h> 55#include <linux/crc32c.h> 56#include <linux/prefetch.h> 57#include <linux/zlib.h> 58#include <linux/io.h> 59#include <linux/semaphore.h> 60#include <linux/stringify.h> 61#include <linux/vmalloc.h> 62 63#include "bnx2x.h" 64#include "bnx2x_init.h" 65#include "bnx2x_init_ops.h" 66#include "bnx2x_cmn.h" 67#include "bnx2x_vfpf.h" 68#include "bnx2x_dcb.h" 69#include "bnx2x_sp.h" 70#include <linux/firmware.h> 71#include "bnx2x_fw_file_hdr.h" 72/* FW files */ 73#define FW_FILE_VERSION \ 74 __stringify(BCM_5710_FW_MAJOR_VERSION) "." \ 75 __stringify(BCM_5710_FW_MINOR_VERSION) "." \ 76 __stringify(BCM_5710_FW_REVISION_VERSION) "." \ 77 __stringify(BCM_5710_FW_ENGINEERING_VERSION) 78#define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw" 79#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw" 80#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw" 81 82/* Time in jiffies before concluding the transmitter is hung */ 83#define TX_TIMEOUT (5*HZ) 84 85static char version[] = 86 "QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver " 87 DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; 88 89MODULE_AUTHOR("Eliezer Tamir"); 90MODULE_DESCRIPTION("QLogic " 91 "BCM57710/57711/57711E/" 92 "57712/57712_MF/57800/57800_MF/57810/57810_MF/" 93 "57840/57840_MF Driver"); 94MODULE_LICENSE("GPL"); 95MODULE_VERSION(DRV_MODULE_VERSION); 96MODULE_FIRMWARE(FW_FILE_NAME_E1); 97MODULE_FIRMWARE(FW_FILE_NAME_E1H); 98MODULE_FIRMWARE(FW_FILE_NAME_E2); 99 100int bnx2x_num_queues; 101module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO); 102MODULE_PARM_DESC(num_queues, 103 " Set number of queues (default is as a number of CPUs)"); 104 105static int disable_tpa; 106module_param(disable_tpa, int, S_IRUGO); 107MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); 108 109static int int_mode; 110module_param(int_mode, int, S_IRUGO); 111MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " 112 "(1 INT#x; 2 MSI)"); 113 114static int dropless_fc; 115module_param(dropless_fc, int, S_IRUGO); 116MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); 117 118static int mrrs = -1; 119module_param(mrrs, int, S_IRUGO); 120MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); 121 122static int debug; 123module_param(debug, int, S_IRUGO); 124MODULE_PARM_DESC(debug, " Default debug msglevel"); 125 126static struct workqueue_struct *bnx2x_wq; 127struct workqueue_struct *bnx2x_iov_wq; 128 129struct bnx2x_mac_vals { 130 u32 xmac_addr; 131 u32 xmac_val; 132 u32 emac_addr; 133 u32 emac_val; 134 u32 umac_addr[2]; 135 u32 umac_val[2]; 136 u32 bmac_addr; 137 u32 bmac_val[2]; 138}; 139 140enum bnx2x_board_type { 141 BCM57710 = 0, 142 BCM57711, 143 BCM57711E, 144 BCM57712, 145 BCM57712_MF, 146 BCM57712_VF, 147 BCM57800, 148 BCM57800_MF, 149 BCM57800_VF, 150 BCM57810, 151 BCM57810_MF, 152 BCM57810_VF, 153 BCM57840_4_10, 154 BCM57840_2_20, 155 BCM57840_MF, 156 BCM57840_VF, 157 BCM57811, 158 BCM57811_MF, 159 BCM57840_O, 160 BCM57840_MFO, 161 BCM57811_VF 162}; 163 164/* indexed by board_type, above */ 165static struct { 166 char *name; 167} board_info[] = { 168 [BCM57710] = { "QLogic BCM57710 10 Gigabit PCIe [Everest]" }, 169 [BCM57711] = { "QLogic BCM57711 10 Gigabit PCIe" }, 170 [BCM57711E] = { "QLogic BCM57711E 10 Gigabit PCIe" }, 171 [BCM57712] = { "QLogic BCM57712 10 Gigabit Ethernet" }, 172 [BCM57712_MF] = { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" }, 173 [BCM57712_VF] = { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" }, 174 [BCM57800] = { "QLogic BCM57800 10 Gigabit Ethernet" }, 175 [BCM57800_MF] = { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" }, 176 [BCM57800_VF] = { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" }, 177 [BCM57810] = { "QLogic BCM57810 10 Gigabit Ethernet" }, 178 [BCM57810_MF] = { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" }, 179 [BCM57810_VF] = { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" }, 180 [BCM57840_4_10] = { "QLogic BCM57840 10 Gigabit Ethernet" }, 181 [BCM57840_2_20] = { "QLogic BCM57840 20 Gigabit Ethernet" }, 182 [BCM57840_MF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" }, 183 [BCM57840_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }, 184 [BCM57811] = { "QLogic BCM57811 10 Gigabit Ethernet" }, 185 [BCM57811_MF] = { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" }, 186 [BCM57840_O] = { "QLogic BCM57840 10/20 Gigabit Ethernet" }, 187 [BCM57840_MFO] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" }, 188 [BCM57811_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" } 189}; 190 191#ifndef PCI_DEVICE_ID_NX2_57710 192#define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710 193#endif 194#ifndef PCI_DEVICE_ID_NX2_57711 195#define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711 196#endif 197#ifndef PCI_DEVICE_ID_NX2_57711E 198#define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E 199#endif 200#ifndef PCI_DEVICE_ID_NX2_57712 201#define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712 202#endif 203#ifndef PCI_DEVICE_ID_NX2_57712_MF 204#define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF 205#endif 206#ifndef PCI_DEVICE_ID_NX2_57712_VF 207#define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF 208#endif 209#ifndef PCI_DEVICE_ID_NX2_57800 210#define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800 211#endif 212#ifndef PCI_DEVICE_ID_NX2_57800_MF 213#define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF 214#endif 215#ifndef PCI_DEVICE_ID_NX2_57800_VF 216#define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF 217#endif 218#ifndef PCI_DEVICE_ID_NX2_57810 219#define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810 220#endif 221#ifndef PCI_DEVICE_ID_NX2_57810_MF 222#define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF 223#endif 224#ifndef PCI_DEVICE_ID_NX2_57840_O 225#define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE 226#endif 227#ifndef PCI_DEVICE_ID_NX2_57810_VF 228#define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF 229#endif 230#ifndef PCI_DEVICE_ID_NX2_57840_4_10 231#define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10 232#endif 233#ifndef PCI_DEVICE_ID_NX2_57840_2_20 234#define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20 235#endif 236#ifndef PCI_DEVICE_ID_NX2_57840_MFO 237#define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE 238#endif 239#ifndef PCI_DEVICE_ID_NX2_57840_MF 240#define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF 241#endif 242#ifndef PCI_DEVICE_ID_NX2_57840_VF 243#define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF 244#endif 245#ifndef PCI_DEVICE_ID_NX2_57811 246#define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811 247#endif 248#ifndef PCI_DEVICE_ID_NX2_57811_MF 249#define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF 250#endif 251#ifndef PCI_DEVICE_ID_NX2_57811_VF 252#define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF 253#endif 254 255static const struct pci_device_id bnx2x_pci_tbl[] = { 256 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 }, 257 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 }, 258 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E }, 259 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 }, 260 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF }, 261 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF }, 262 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 }, 263 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF }, 264 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF }, 265 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 }, 266 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF }, 267 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O }, 268 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, 269 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, 270 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 }, 271 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF }, 272 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO }, 273 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, 274 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, 275 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, 276 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, 277 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 }, 278 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF }, 279 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF }, 280 { 0 } 281}; 282 283MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl); 284 285/* Global resources for unloading a previously loaded device */ 286#define BNX2X_PREV_WAIT_NEEDED 1 287static DEFINE_SEMAPHORE(bnx2x_prev_sem); 288static LIST_HEAD(bnx2x_prev_list); 289 290/* Forward declaration */ 291static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev); 292static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp); 293static int bnx2x_set_storm_rx_mode(struct bnx2x *bp); 294 295/**************************************************************************** 296* General service functions 297****************************************************************************/ 298 299static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr); 300 301static void __storm_memset_dma_mapping(struct bnx2x *bp, 302 u32 addr, dma_addr_t mapping) 303{ 304 REG_WR(bp, addr, U64_LO(mapping)); 305 REG_WR(bp, addr + 4, U64_HI(mapping)); 306} 307 308static void storm_memset_spq_addr(struct bnx2x *bp, 309 dma_addr_t mapping, u16 abs_fid) 310{ 311 u32 addr = XSEM_REG_FAST_MEMORY + 312 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid); 313 314 __storm_memset_dma_mapping(bp, addr, mapping); 315} 316 317static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, 318 u16 pf_id) 319{ 320 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), 321 pf_id); 322 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), 323 pf_id); 324 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), 325 pf_id); 326 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), 327 pf_id); 328} 329 330static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, 331 u8 enable) 332{ 333 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), 334 enable); 335 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), 336 enable); 337 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), 338 enable); 339 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), 340 enable); 341} 342 343static void storm_memset_eq_data(struct bnx2x *bp, 344 struct event_ring_data *eq_data, 345 u16 pfid) 346{ 347 size_t size = sizeof(struct event_ring_data); 348 349 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid); 350 351 __storm_memset_struct(bp, addr, size, (u32 *)eq_data); 352} 353 354static void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod, 355 u16 pfid) 356{ 357 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid); 358 REG_WR16(bp, addr, eq_prod); 359} 360 361/* used only at init 362 * locking is done by mcp 363 */ 364static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val) 365{ 366 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); 367 pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val); 368 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, 369 PCICFG_VENDOR_ID_OFFSET); 370} 371 372static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr) 373{ 374 u32 val; 375 376 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); 377 pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val); 378 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, 379 PCICFG_VENDOR_ID_OFFSET); 380 381 return val; 382} 383 384#define DMAE_DP_SRC_GRC "grc src_addr [%08x]" 385#define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]" 386#define DMAE_DP_DST_GRC "grc dst_addr [%08x]" 387#define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]" 388#define DMAE_DP_DST_NONE "dst_addr [none]" 389 390static void bnx2x_dp_dmae(struct bnx2x *bp, 391 struct dmae_command *dmae, int msglvl) 392{ 393 u32 src_type = dmae->opcode & DMAE_COMMAND_SRC; 394 int i; 395 396 switch (dmae->opcode & DMAE_COMMAND_DST) { 397 case DMAE_CMD_DST_PCI: 398 if (src_type == DMAE_CMD_SRC_PCI) 399 DP(msglvl, "DMAE: opcode 0x%08x\n" 400 "src [%x:%08x], len [%d*4], dst [%x:%08x]\n" 401 "comp_addr [%x:%08x], comp_val 0x%08x\n", 402 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, 403 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, 404 dmae->comp_addr_hi, dmae->comp_addr_lo, 405 dmae->comp_val); 406 else 407 DP(msglvl, "DMAE: opcode 0x%08x\n" 408 "src [%08x], len [%d*4], dst [%x:%08x]\n" 409 "comp_addr [%x:%08x], comp_val 0x%08x\n", 410 dmae->opcode, dmae->src_addr_lo >> 2, 411 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, 412 dmae->comp_addr_hi, dmae->comp_addr_lo, 413 dmae->comp_val); 414 break; 415 case DMAE_CMD_DST_GRC: 416 if (src_type == DMAE_CMD_SRC_PCI) 417 DP(msglvl, "DMAE: opcode 0x%08x\n" 418 "src [%x:%08x], len [%d*4], dst_addr [%08x]\n" 419 "comp_addr [%x:%08x], comp_val 0x%08x\n", 420 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, 421 dmae->len, dmae->dst_addr_lo >> 2, 422 dmae->comp_addr_hi, dmae->comp_addr_lo, 423 dmae->comp_val); 424 else 425 DP(msglvl, "DMAE: opcode 0x%08x\n" 426 "src [%08x], len [%d*4], dst [%08x]\n" 427 "comp_addr [%x:%08x], comp_val 0x%08x\n", 428 dmae->opcode, dmae->src_addr_lo >> 2, 429 dmae->len, dmae->dst_addr_lo >> 2, 430 dmae->comp_addr_hi, dmae->comp_addr_lo, 431 dmae->comp_val); 432 break; 433 default: 434 if (src_type == DMAE_CMD_SRC_PCI) 435 DP(msglvl, "DMAE: opcode 0x%08x\n" 436 "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n" 437 "comp_addr [%x:%08x] comp_val 0x%08x\n", 438 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, 439 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, 440 dmae->comp_val); 441 else 442 DP(msglvl, "DMAE: opcode 0x%08x\n" 443 "src_addr [%08x] len [%d * 4] dst_addr [none]\n" 444 "comp_addr [%x:%08x] comp_val 0x%08x\n", 445 dmae->opcode, dmae->src_addr_lo >> 2, 446 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, 447 dmae->comp_val); 448 break; 449 } 450 451 for (i = 0; i < (sizeof(struct dmae_command)/4); i++) 452 DP(msglvl, "DMAE RAW [%02d]: 0x%08x\n", 453 i, *(((u32 *)dmae) + i)); 454} 455 456/* copy command into DMAE command memory and set DMAE command go */ 457void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx) 458{ 459 u32 cmd_offset; 460 int i; 461 462 cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx); 463 for (i = 0; i < (sizeof(struct dmae_command)/4); i++) { 464 REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i)); 465 } 466 REG_WR(bp, dmae_reg_go_c[idx], 1); 467} 468 469u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type) 470{ 471 return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) | 472 DMAE_CMD_C_ENABLE); 473} 474 475u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode) 476{ 477 return opcode & ~DMAE_CMD_SRC_RESET; 478} 479 480u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, 481 bool with_comp, u8 comp_type) 482{ 483 u32 opcode = 0; 484 485 opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) | 486 (dst_type << DMAE_COMMAND_DST_SHIFT)); 487 488 opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); 489 490 opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); 491 opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | 492 (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); 493 opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); 494 495#ifdef __BIG_ENDIAN 496 opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP; 497#else 498 opcode |= DMAE_CMD_ENDIANITY_DW_SWAP; 499#endif 500 if (with_comp) 501 opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type); 502 return opcode; 503} 504 505void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, 506 struct dmae_command *dmae, 507 u8 src_type, u8 dst_type) 508{ 509 memset(dmae, 0, sizeof(struct dmae_command)); 510 511 /* set the opcode */ 512 dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type, 513 true, DMAE_COMP_PCI); 514 515 /* fill in the completion parameters */ 516 dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp)); 517 dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp)); 518 dmae->comp_val = DMAE_COMP_VAL; 519} 520 521/* issue a dmae command over the init-channel and wait for completion */ 522int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, 523 u32 *comp) 524{ 525 int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; 526 int rc = 0; 527 528 bnx2x_dp_dmae(bp, dmae, BNX2X_MSG_DMAE); 529 530 /* Lock the dmae channel. Disable BHs to prevent a dead-lock 531 * as long as this code is called both from syscall context and 532 * from ndo_set_rx_mode() flow that may be called from BH. 533 */ 534 535 spin_lock_bh(&bp->dmae_lock); 536 537 /* reset completion */ 538 *comp = 0; 539 540 /* post the command on the channel used for initializations */ 541 bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); 542 543 /* wait for completion */ 544 udelay(5); 545 while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { 546 547 if (!cnt || 548 (bp->recovery_state != BNX2X_RECOVERY_DONE && 549 bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { 550 BNX2X_ERR("DMAE timeout!\n"); 551 rc = DMAE_TIMEOUT; 552 goto unlock; 553 } 554 cnt--; 555 udelay(50); 556 } 557 if (*comp & DMAE_PCI_ERR_FLAG) { 558 BNX2X_ERR("DMAE PCI error!\n"); 559 rc = DMAE_PCI_ERROR; 560 } 561 562unlock: 563 564 spin_unlock_bh(&bp->dmae_lock); 565 566 return rc; 567} 568 569void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, 570 u32 len32) 571{ 572 int rc; 573 struct dmae_command dmae; 574 575 if (!bp->dmae_ready) { 576 u32 *data = bnx2x_sp(bp, wb_data[0]); 577 578 if (CHIP_IS_E1(bp)) 579 bnx2x_init_ind_wr(bp, dst_addr, data, len32); 580 else 581 bnx2x_init_str_wr(bp, dst_addr, data, len32); 582 return; 583 } 584 585 /* set opcode and fixed command fields */ 586 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC); 587 588 /* fill in addresses and len */ 589 dmae.src_addr_lo = U64_LO(dma_addr); 590 dmae.src_addr_hi = U64_HI(dma_addr); 591 dmae.dst_addr_lo = dst_addr >> 2; 592 dmae.dst_addr_hi = 0; 593 dmae.len = len32; 594 595 /* issue the command and wait for completion */ 596 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); 597 if (rc) { 598 BNX2X_ERR("DMAE returned failure %d\n", rc); 599#ifdef BNX2X_STOP_ON_ERROR 600 bnx2x_panic(); 601#endif 602 } 603} 604 605void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) 606{ 607 int rc; 608 struct dmae_command dmae; 609 610 if (!bp->dmae_ready) { 611 u32 *data = bnx2x_sp(bp, wb_data[0]); 612 int i; 613 614 if (CHIP_IS_E1(bp)) 615 for (i = 0; i < len32; i++) 616 data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); 617 else 618 for (i = 0; i < len32; i++) 619 data[i] = REG_RD(bp, src_addr + i*4); 620 621 return; 622 } 623 624 /* set opcode and fixed command fields */ 625 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI); 626 627 /* fill in addresses and len */ 628 dmae.src_addr_lo = src_addr >> 2; 629 dmae.src_addr_hi = 0; 630 dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data)); 631 dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data)); 632 dmae.len = len32; 633 634 /* issue the command and wait for completion */ 635 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); 636 if (rc) { 637 BNX2X_ERR("DMAE returned failure %d\n", rc); 638#ifdef BNX2X_STOP_ON_ERROR 639 bnx2x_panic(); 640#endif 641 } 642} 643 644static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr, 645 u32 addr, u32 len) 646{ 647 int dmae_wr_max = DMAE_LEN32_WR_MAX(bp); 648 int offset = 0; 649 650 while (len > dmae_wr_max) { 651 bnx2x_write_dmae(bp, phys_addr + offset, 652 addr + offset, dmae_wr_max); 653 offset += dmae_wr_max * 4; 654 len -= dmae_wr_max; 655 } 656 657 bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len); 658} 659 660enum storms { 661 XSTORM, 662 TSTORM, 663 CSTORM, 664 USTORM, 665 MAX_STORMS 666}; 667 668#define STORMS_NUM 4 669#define REGS_IN_ENTRY 4 670 671static inline int bnx2x_get_assert_list_entry(struct bnx2x *bp, 672 enum storms storm, 673 int entry) 674{ 675 switch (storm) { 676 case XSTORM: 677 return XSTORM_ASSERT_LIST_OFFSET(entry); 678 case TSTORM: 679 return TSTORM_ASSERT_LIST_OFFSET(entry); 680 case CSTORM: 681 return CSTORM_ASSERT_LIST_OFFSET(entry); 682 case USTORM: 683 return USTORM_ASSERT_LIST_OFFSET(entry); 684 case MAX_STORMS: 685 default: 686 BNX2X_ERR("unknown storm\n"); 687 } 688 return -EINVAL; 689} 690 691static int bnx2x_mc_assert(struct bnx2x *bp) 692{ 693 char last_idx; 694 int i, j, rc = 0; 695 enum storms storm; 696 u32 regs[REGS_IN_ENTRY]; 697 u32 bar_storm_intmem[STORMS_NUM] = { 698 BAR_XSTRORM_INTMEM, 699 BAR_TSTRORM_INTMEM, 700 BAR_CSTRORM_INTMEM, 701 BAR_USTRORM_INTMEM 702 }; 703 u32 storm_assert_list_index[STORMS_NUM] = { 704 XSTORM_ASSERT_LIST_INDEX_OFFSET, 705 TSTORM_ASSERT_LIST_INDEX_OFFSET, 706 CSTORM_ASSERT_LIST_INDEX_OFFSET, 707 USTORM_ASSERT_LIST_INDEX_OFFSET 708 }; 709 char *storms_string[STORMS_NUM] = { 710 "XSTORM", 711 "TSTORM", 712 "CSTORM", 713 "USTORM" 714 }; 715 716 for (storm = XSTORM; storm < MAX_STORMS; storm++) { 717 last_idx = REG_RD8(bp, bar_storm_intmem[storm] + 718 storm_assert_list_index[storm]); 719 if (last_idx) 720 BNX2X_ERR("%s_ASSERT_LIST_INDEX 0x%x\n", 721 storms_string[storm], last_idx); 722 723 /* print the asserts */ 724 for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { 725 /* read a single assert entry */ 726 for (j = 0; j < REGS_IN_ENTRY; j++) 727 regs[j] = REG_RD(bp, bar_storm_intmem[storm] + 728 bnx2x_get_assert_list_entry(bp, 729 storm, 730 i) + 731 sizeof(u32) * j); 732 733 /* log entry if it contains a valid assert */ 734 if (regs[0] != COMMON_ASM_INVALID_ASSERT_OPCODE) { 735 BNX2X_ERR("%s_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n", 736 storms_string[storm], i, regs[3], 737 regs[2], regs[1], regs[0]); 738 rc++; 739 } else { 740 break; 741 } 742 } 743 } 744 745 BNX2X_ERR("Chip Revision: %s, FW Version: %d_%d_%d\n", 746 CHIP_IS_E1(bp) ? "everest1" : 747 CHIP_IS_E1H(bp) ? "everest1h" : 748 CHIP_IS_E2(bp) ? "everest2" : "everest3", 749 BCM_5710_FW_MAJOR_VERSION, 750 BCM_5710_FW_MINOR_VERSION, 751 BCM_5710_FW_REVISION_VERSION); 752 753 return rc; 754} 755 756#define MCPR_TRACE_BUFFER_SIZE (0x800) 757#define SCRATCH_BUFFER_SIZE(bp) \ 758 (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000)) 759 760void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) 761{ 762 u32 addr, val; 763 u32 mark, offset; 764 __be32 data[9]; 765 int word; 766 u32 trace_shmem_base; 767 if (BP_NOMCP(bp)) { 768 BNX2X_ERR("NO MCP - can not dump\n"); 769 return; 770 } 771 netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n", 772 (bp->common.bc_ver & 0xff0000) >> 16, 773 (bp->common.bc_ver & 0xff00) >> 8, 774 (bp->common.bc_ver & 0xff)); 775 776 val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); 777 if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) 778 BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val); 779 780 if (BP_PATH(bp) == 0) 781 trace_shmem_base = bp->common.shmem_base; 782 else 783 trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); 784 785 /* sanity */ 786 if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE || 787 trace_shmem_base >= MCPR_SCRATCH_BASE(bp) + 788 SCRATCH_BUFFER_SIZE(bp)) { 789 BNX2X_ERR("Unable to dump trace buffer (mark %x)\n", 790 trace_shmem_base); 791 return; 792 } 793 794 addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE; 795 796 /* validate TRCB signature */ 797 mark = REG_RD(bp, addr); 798 if (mark != MFW_TRACE_SIGNATURE) { 799 BNX2X_ERR("Trace buffer signature is missing."); 800 return ; 801 } 802 803 /* read cyclic buffer pointer */ 804 addr += 4; 805 mark = REG_RD(bp, addr); 806 mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000; 807 if (mark >= trace_shmem_base || mark < addr + 4) { 808 BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n"); 809 return; 810 } 811 printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); 812 813 printk("%s", lvl); 814 815 /* dump buffer after the mark */ 816 for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) { 817 for (word = 0; word < 8; word++) 818 data[word] = htonl(REG_RD(bp, offset + 4*word)); 819 data[8] = 0x0; 820 pr_cont("%s", (char *)data); 821 } 822 823 /* dump buffer before the mark */ 824 for (offset = addr + 4; offset <= mark; offset += 0x8*4) { 825 for (word = 0; word < 8; word++) 826 data[word] = htonl(REG_RD(bp, offset + 4*word)); 827 data[8] = 0x0; 828 pr_cont("%s", (char *)data); 829 } 830 printk("%s" "end of fw dump\n", lvl); 831} 832 833static void bnx2x_fw_dump(struct bnx2x *bp) 834{ 835 bnx2x_fw_dump_lvl(bp, KERN_ERR); 836} 837 838static void bnx2x_hc_int_disable(struct bnx2x *bp) 839{ 840 int port = BP_PORT(bp); 841 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; 842 u32 val = REG_RD(bp, addr); 843 844 /* in E1 we must use only PCI configuration space to disable 845 * MSI/MSIX capability 846 * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block 847 */ 848 if (CHIP_IS_E1(bp)) { 849 /* Since IGU_PF_CONF_MSI_MSIX_EN still always on 850 * Use mask register to prevent from HC sending interrupts 851 * after we exit the function 852 */ 853 REG_WR(bp, HC_REG_INT_MASK + port*4, 0); 854 855 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 856 HC_CONFIG_0_REG_INT_LINE_EN_0 | 857 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 858 } else 859 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 860 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 861 HC_CONFIG_0_REG_INT_LINE_EN_0 | 862 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 863 864 DP(NETIF_MSG_IFDOWN, 865 "write %x to HC %d (addr 0x%x)\n", 866 val, port, addr); 867 868 /* flush all outstanding writes */ 869 mmiowb(); 870 871 REG_WR(bp, addr, val); 872 if (REG_RD(bp, addr) != val) 873 BNX2X_ERR("BUG! Proper val not read from IGU!\n"); 874} 875 876static void bnx2x_igu_int_disable(struct bnx2x *bp) 877{ 878 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); 879 880 val &= ~(IGU_PF_CONF_MSI_MSIX_EN | 881 IGU_PF_CONF_INT_LINE_EN | 882 IGU_PF_CONF_ATTN_BIT_EN); 883 884 DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val); 885 886 /* flush all outstanding writes */ 887 mmiowb(); 888 889 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 890 if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) 891 BNX2X_ERR("BUG! Proper val not read from IGU!\n"); 892} 893 894static void bnx2x_int_disable(struct bnx2x *bp) 895{ 896 if (bp->common.int_block == INT_BLOCK_HC) 897 bnx2x_hc_int_disable(bp); 898 else 899 bnx2x_igu_int_disable(bp); 900} 901 902void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int) 903{ 904 int i; 905 u16 j; 906 struct hc_sp_status_block_data sp_sb_data; 907 int func = BP_FUNC(bp); 908#ifdef BNX2X_STOP_ON_ERROR 909 u16 start = 0, end = 0; 910 u8 cos; 911#endif 912 if (IS_PF(bp) && disable_int) 913 bnx2x_int_disable(bp); 914 915 bp->stats_state = STATS_STATE_DISABLED; 916 bp->eth_stats.unrecoverable_error++; 917 DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n"); 918 919 BNX2X_ERR("begin crash dump -----------------\n"); 920 921 /* Indices */ 922 /* Common */ 923 if (IS_PF(bp)) { 924 struct host_sp_status_block *def_sb = bp->def_status_blk; 925 int data_size, cstorm_offset; 926 927 BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n", 928 bp->def_idx, bp->def_att_idx, bp->attn_state, 929 bp->spq_prod_idx, bp->stats_counter); 930 BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n", 931 def_sb->atten_status_block.attn_bits, 932 def_sb->atten_status_block.attn_bits_ack, 933 def_sb->atten_status_block.status_block_id, 934 def_sb->atten_status_block.attn_bits_index); 935 BNX2X_ERR(" def ("); 936 for (i = 0; i < HC_SP_SB_MAX_INDICES; i++) 937 pr_cont("0x%x%s", 938 def_sb->sp_sb.index_values[i], 939 (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " "); 940 941 data_size = sizeof(struct hc_sp_status_block_data) / 942 sizeof(u32); 943 cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func); 944 for (i = 0; i < data_size; i++) 945 *((u32 *)&sp_sb_data + i) = 946 REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset + 947 i * sizeof(u32)); 948 949 pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n", 950 sp_sb_data.igu_sb_id, 951 sp_sb_data.igu_seg_id, 952 sp_sb_data.p_func.pf_id, 953 sp_sb_data.p_func.vnic_id, 954 sp_sb_data.p_func.vf_id, 955 sp_sb_data.p_func.vf_valid, 956 sp_sb_data.state); 957 } 958 959 for_each_eth_queue(bp, i) { 960 struct bnx2x_fastpath *fp = &bp->fp[i]; 961 int loop; 962 struct hc_status_block_data_e2 sb_data_e2; 963 struct hc_status_block_data_e1x sb_data_e1x; 964 struct hc_status_block_sm *hc_sm_p = 965 CHIP_IS_E1x(bp) ? 966 sb_data_e1x.common.state_machine : 967 sb_data_e2.common.state_machine; 968 struct hc_index_data *hc_index_p = 969 CHIP_IS_E1x(bp) ? 970 sb_data_e1x.index_data : 971 sb_data_e2.index_data; 972 u8 data_size, cos; 973 u32 *sb_data_p; 974 struct bnx2x_fp_txdata txdata; 975 976 if (!bp->fp) 977 break; 978 979 if (!fp->rx_cons_sb) 980 continue; 981 982 /* Rx */ 983 BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n", 984 i, fp->rx_bd_prod, fp->rx_bd_cons, 985 fp->rx_comp_prod, 986 fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb)); 987 BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n", 988 fp->rx_sge_prod, fp->last_max_sge, 989 le16_to_cpu(fp->fp_hc_idx)); 990 991 /* Tx */ 992 for_each_cos_in_tx_queue(fp, cos) 993 { 994 if (!fp->txdata_ptr[cos]) 995 break; 996 997 txdata = *fp->txdata_ptr[cos]; 998 999 if (!txdata.tx_cons_sb) 1000 continue; 1001 1002 BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n", 1003 i, txdata.tx_pkt_prod, 1004 txdata.tx_pkt_cons, txdata.tx_bd_prod, 1005 txdata.tx_bd_cons, 1006 le16_to_cpu(*txdata.tx_cons_sb)); 1007 } 1008 1009 loop = CHIP_IS_E1x(bp) ? 1010 HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2; 1011 1012 /* host sb data */ 1013 1014 if (IS_FCOE_FP(fp)) 1015 continue; 1016 1017 BNX2X_ERR(" run indexes ("); 1018 for (j = 0; j < HC_SB_MAX_SM; j++) 1019 pr_cont("0x%x%s", 1020 fp->sb_running_index[j], 1021 (j == HC_SB_MAX_SM - 1) ? ")" : " "); 1022 1023 BNX2X_ERR(" indexes ("); 1024 for (j = 0; j < loop; j++) 1025 pr_cont("0x%x%s", 1026 fp->sb_index_values[j], 1027 (j == loop - 1) ? ")" : " "); 1028 1029 /* VF cannot access FW refelection for status block */ 1030 if (IS_VF(bp)) 1031 continue; 1032 1033 /* fw sb data */ 1034 data_size = CHIP_IS_E1x(bp) ? 1035 sizeof(struct hc_status_block_data_e1x) : 1036 sizeof(struct hc_status_block_data_e2); 1037 data_size /= sizeof(u32); 1038 sb_data_p = CHIP_IS_E1x(bp) ? 1039 (u32 *)&sb_data_e1x : 1040 (u32 *)&sb_data_e2; 1041 /* copy sb data in here */ 1042 for (j = 0; j < data_size; j++) 1043 *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM + 1044 CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) + 1045 j * sizeof(u32)); 1046 1047 if (!CHIP_IS_E1x(bp)) { 1048 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", 1049 sb_data_e2.common.p_func.pf_id, 1050 sb_data_e2.common.p_func.vf_id, 1051 sb_data_e2.common.p_func.vf_valid, 1052 sb_data_e2.common.p_func.vnic_id, 1053 sb_data_e2.common.same_igu_sb_1b, 1054 sb_data_e2.common.state); 1055 } else { 1056 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", 1057 sb_data_e1x.common.p_func.pf_id, 1058 sb_data_e1x.common.p_func.vf_id, 1059 sb_data_e1x.common.p_func.vf_valid, 1060 sb_data_e1x.common.p_func.vnic_id, 1061 sb_data_e1x.common.same_igu_sb_1b, 1062 sb_data_e1x.common.state); 1063 } 1064 1065 /* SB_SMs data */ 1066 for (j = 0; j < HC_SB_MAX_SM; j++) { 1067 pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n", 1068 j, hc_sm_p[j].__flags, 1069 hc_sm_p[j].igu_sb_id, 1070 hc_sm_p[j].igu_seg_id, 1071 hc_sm_p[j].time_to_expire, 1072 hc_sm_p[j].timer_value); 1073 } 1074 1075 /* Indices data */ 1076 for (j = 0; j < loop; j++) { 1077 pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j, 1078 hc_index_p[j].flags, 1079 hc_index_p[j].timeout); 1080 } 1081 } 1082 1083#ifdef BNX2X_STOP_ON_ERROR 1084 if (IS_PF(bp)) { 1085 /* event queue */ 1086 BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod); 1087 for (i = 0; i < NUM_EQ_DESC; i++) { 1088 u32 *data = (u32 *)&bp->eq_ring[i].message.data; 1089 1090 BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n", 1091 i, bp->eq_ring[i].message.opcode, 1092 bp->eq_ring[i].message.error); 1093 BNX2X_ERR("data: %x %x %x\n", 1094 data[0], data[1], data[2]); 1095 } 1096 } 1097 1098 /* Rings */ 1099 /* Rx */ 1100 for_each_valid_rx_queue(bp, i) { 1101 struct bnx2x_fastpath *fp = &bp->fp[i]; 1102 1103 if (!bp->fp) 1104 break; 1105 1106 if (!fp->rx_cons_sb) 1107 continue; 1108 1109 start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10); 1110 end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503); 1111 for (j = start; j != end; j = RX_BD(j + 1)) { 1112 u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j]; 1113 struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j]; 1114 1115 BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n", 1116 i, j, rx_bd[1], rx_bd[0], sw_bd->data); 1117 } 1118 1119 start = RX_SGE(fp->rx_sge_prod); 1120 end = RX_SGE(fp->last_max_sge); 1121 for (j = start; j != end; j = RX_SGE(j + 1)) { 1122 u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j]; 1123 struct sw_rx_page *sw_page = &fp->rx_page_ring[j]; 1124 1125 BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n", 1126 i, j, rx_sge[1], rx_sge[0], sw_page->page); 1127 } 1128 1129 start = RCQ_BD(fp->rx_comp_cons - 10); 1130 end = RCQ_BD(fp->rx_comp_cons + 503); 1131 for (j = start; j != end; j = RCQ_BD(j + 1)) { 1132 u32 *cqe = (u32 *)&fp->rx_comp_ring[j]; 1133 1134 BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n", 1135 i, j, cqe[0], cqe[1], cqe[2], cqe[3]); 1136 } 1137 } 1138 1139 /* Tx */ 1140 for_each_valid_tx_queue(bp, i) { 1141 struct bnx2x_fastpath *fp = &bp->fp[i]; 1142 1143 if (!bp->fp) 1144 break; 1145 1146 for_each_cos_in_tx_queue(fp, cos) { 1147 struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; 1148 1149 if (!fp->txdata_ptr[cos]) 1150 break; 1151 1152 if (!txdata->tx_cons_sb) 1153 continue; 1154 1155 start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10); 1156 end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245); 1157 for (j = start; j != end; j = TX_BD(j + 1)) { 1158 struct sw_tx_bd *sw_bd = 1159 &txdata->tx_buf_ring[j]; 1160 1161 BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n", 1162 i, cos, j, sw_bd->skb, 1163 sw_bd->first_bd); 1164 } 1165 1166 start = TX_BD(txdata->tx_bd_cons - 10); 1167 end = TX_BD(txdata->tx_bd_cons + 254); 1168 for (j = start; j != end; j = TX_BD(j + 1)) { 1169 u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j]; 1170 1171 BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n", 1172 i, cos, j, tx_bd[0], tx_bd[1], 1173 tx_bd[2], tx_bd[3]); 1174 } 1175 } 1176 } 1177#endif 1178 if (IS_PF(bp)) { 1179 bnx2x_fw_dump(bp); 1180 bnx2x_mc_assert(bp); 1181 } 1182 BNX2X_ERR("end crash dump -----------------\n"); 1183} 1184 1185/* 1186 * FLR Support for E2 1187 * 1188 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW 1189 * initialization. 1190 */ 1191#define FLR_WAIT_USEC 10000 /* 10 milliseconds */ 1192#define FLR_WAIT_INTERVAL 50 /* usec */ 1193#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */ 1194 1195struct pbf_pN_buf_regs { 1196 int pN; 1197 u32 init_crd; 1198 u32 crd; 1199 u32 crd_freed; 1200}; 1201 1202struct pbf_pN_cmd_regs { 1203 int pN; 1204 u32 lines_occup; 1205 u32 lines_freed; 1206}; 1207 1208static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, 1209 struct pbf_pN_buf_regs *regs, 1210 u32 poll_count) 1211{ 1212 u32 init_crd, crd, crd_start, crd_freed, crd_freed_start; 1213 u32 cur_cnt = poll_count; 1214 1215 crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed); 1216 crd = crd_start = REG_RD(bp, regs->crd); 1217 init_crd = REG_RD(bp, regs->init_crd); 1218 1219 DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd); 1220 DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd); 1221 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed); 1222 1223 while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) < 1224 (init_crd - crd_start))) { 1225 if (cur_cnt--) { 1226 udelay(FLR_WAIT_INTERVAL); 1227 crd = REG_RD(bp, regs->crd); 1228 crd_freed = REG_RD(bp, regs->crd_freed); 1229 } else { 1230 DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n", 1231 regs->pN); 1232 DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n", 1233 regs->pN, crd); 1234 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n", 1235 regs->pN, crd_freed); 1236 break; 1237 } 1238 } 1239 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n", 1240 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); 1241} 1242 1243static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, 1244 struct pbf_pN_cmd_regs *regs, 1245 u32 poll_count) 1246{ 1247 u32 occup, to_free, freed, freed_start; 1248 u32 cur_cnt = poll_count; 1249 1250 occup = to_free = REG_RD(bp, regs->lines_occup); 1251 freed = freed_start = REG_RD(bp, regs->lines_freed); 1252 1253 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup); 1254 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed); 1255 1256 while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) { 1257 if (cur_cnt--) { 1258 udelay(FLR_WAIT_INTERVAL); 1259 occup = REG_RD(bp, regs->lines_occup); 1260 freed = REG_RD(bp, regs->lines_freed); 1261 } else { 1262 DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n", 1263 regs->pN); 1264 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", 1265 regs->pN, occup); 1266 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", 1267 regs->pN, freed); 1268 break; 1269 } 1270 } 1271 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n", 1272 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); 1273} 1274 1275static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, 1276 u32 expected, u32 poll_count) 1277{ 1278 u32 cur_cnt = poll_count; 1279 u32 val; 1280 1281 while ((val = REG_RD(bp, reg)) != expected && cur_cnt--) 1282 udelay(FLR_WAIT_INTERVAL); 1283 1284 return val; 1285} 1286 1287int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, 1288 char *msg, u32 poll_cnt) 1289{ 1290 u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt); 1291 if (val != 0) { 1292 BNX2X_ERR("%s usage count=%d\n", msg, val); 1293 return 1; 1294 } 1295 return 0; 1296} 1297 1298/* Common routines with VF FLR cleanup */ 1299u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) 1300{ 1301 /* adjust polling timeout */ 1302 if (CHIP_REV_IS_EMUL(bp)) 1303 return FLR_POLL_CNT * 2000; 1304 1305 if (CHIP_REV_IS_FPGA(bp)) 1306 return FLR_POLL_CNT * 120; 1307 1308 return FLR_POLL_CNT; 1309} 1310 1311void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) 1312{ 1313 struct pbf_pN_cmd_regs cmd_regs[] = { 1314 {0, (CHIP_IS_E3B0(bp)) ? 1315 PBF_REG_TQ_OCCUPANCY_Q0 : 1316 PBF_REG_P0_TQ_OCCUPANCY, 1317 (CHIP_IS_E3B0(bp)) ? 1318 PBF_REG_TQ_LINES_FREED_CNT_Q0 : 1319 PBF_REG_P0_TQ_LINES_FREED_CNT}, 1320 {1, (CHIP_IS_E3B0(bp)) ? 1321 PBF_REG_TQ_OCCUPANCY_Q1 : 1322 PBF_REG_P1_TQ_OCCUPANCY, 1323 (CHIP_IS_E3B0(bp)) ? 1324 PBF_REG_TQ_LINES_FREED_CNT_Q1 : 1325 PBF_REG_P1_TQ_LINES_FREED_CNT}, 1326 {4, (CHIP_IS_E3B0(bp)) ? 1327 PBF_REG_TQ_OCCUPANCY_LB_Q : 1328 PBF_REG_P4_TQ_OCCUPANCY, 1329 (CHIP_IS_E3B0(bp)) ? 1330 PBF_REG_TQ_LINES_FREED_CNT_LB_Q : 1331 PBF_REG_P4_TQ_LINES_FREED_CNT} 1332 }; 1333 1334 struct pbf_pN_buf_regs buf_regs[] = { 1335 {0, (CHIP_IS_E3B0(bp)) ? 1336 PBF_REG_INIT_CRD_Q0 : 1337 PBF_REG_P0_INIT_CRD , 1338 (CHIP_IS_E3B0(bp)) ? 1339 PBF_REG_CREDIT_Q0 : 1340 PBF_REG_P0_CREDIT, 1341 (CHIP_IS_E3B0(bp)) ? 1342 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 : 1343 PBF_REG_P0_INTERNAL_CRD_FREED_CNT}, 1344 {1, (CHIP_IS_E3B0(bp)) ? 1345 PBF_REG_INIT_CRD_Q1 : 1346 PBF_REG_P1_INIT_CRD, 1347 (CHIP_IS_E3B0(bp)) ? 1348 PBF_REG_CREDIT_Q1 : 1349 PBF_REG_P1_CREDIT, 1350 (CHIP_IS_E3B0(bp)) ? 1351 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 : 1352 PBF_REG_P1_INTERNAL_CRD_FREED_CNT}, 1353 {4, (CHIP_IS_E3B0(bp)) ? 1354 PBF_REG_INIT_CRD_LB_Q : 1355 PBF_REG_P4_INIT_CRD, 1356 (CHIP_IS_E3B0(bp)) ? 1357 PBF_REG_CREDIT_LB_Q : 1358 PBF_REG_P4_CREDIT, 1359 (CHIP_IS_E3B0(bp)) ? 1360 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q : 1361 PBF_REG_P4_INTERNAL_CRD_FREED_CNT}, 1362 }; 1363 1364 int i; 1365 1366 /* Verify the command queues are flushed P0, P1, P4 */ 1367 for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) 1368 bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count); 1369 1370 /* Verify the transmission buffers are flushed P0, P1, P4 */ 1371 for (i = 0; i < ARRAY_SIZE(buf_regs); i++) 1372 bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count); 1373} 1374 1375#define OP_GEN_PARAM(param) \ 1376 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM) 1377 1378#define OP_GEN_TYPE(type) \ 1379 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE) 1380 1381#define OP_GEN_AGG_VECT(index) \ 1382 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX) 1383 1384int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) 1385{ 1386 u32 op_gen_command = 0; 1387 u32 comp_addr = BAR_CSTRORM_INTMEM + 1388 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func); 1389 int ret = 0; 1390 1391 if (REG_RD(bp, comp_addr)) { 1392 BNX2X_ERR("Cleanup complete was not 0 before sending\n"); 1393 return 1; 1394 } 1395 1396 op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); 1397 op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); 1398 op_gen_command |= OP_GEN_AGG_VECT(clnup_func); 1399 op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; 1400 1401 DP(BNX2X_MSG_SP, "sending FW Final cleanup\n"); 1402 REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command); 1403 1404 if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { 1405 BNX2X_ERR("FW final cleanup did not succeed\n"); 1406 DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n", 1407 (REG_RD(bp, comp_addr))); 1408 bnx2x_panic(); 1409 return 1; 1410 } 1411 /* Zero completion for next FLR */ 1412 REG_WR(bp, comp_addr, 0); 1413 1414 return ret; 1415} 1416 1417u8 bnx2x_is_pcie_pending(struct pci_dev *dev) 1418{ 1419 u16 status; 1420 1421 pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status); 1422 return status & PCI_EXP_DEVSTA_TRPND; 1423} 1424 1425/* PF FLR specific routines 1426*/ 1427static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt) 1428{ 1429 /* wait for CFC PF usage-counter to zero (includes all the VFs) */ 1430 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1431 CFC_REG_NUM_LCIDS_INSIDE_PF, 1432 "CFC PF usage counter timed out", 1433 poll_cnt)) 1434 return 1; 1435 1436 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */ 1437 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1438 DORQ_REG_PF_USAGE_CNT, 1439 "DQ PF usage counter timed out", 1440 poll_cnt)) 1441 return 1; 1442 1443 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */ 1444 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1445 QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp), 1446 "QM PF usage counter timed out", 1447 poll_cnt)) 1448 return 1; 1449 1450 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */ 1451 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1452 TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp), 1453 "Timers VNIC usage counter timed out", 1454 poll_cnt)) 1455 return 1; 1456 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1457 TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp), 1458 "Timers NUM_SCANS usage counter timed out", 1459 poll_cnt)) 1460 return 1; 1461 1462 /* Wait DMAE PF usage counter to zero */ 1463 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1464 dmae_reg_go_c[INIT_DMAE_C(bp)], 1465 "DMAE command register timed out", 1466 poll_cnt)) 1467 return 1; 1468 1469 return 0; 1470} 1471 1472static void bnx2x_hw_enable_status(struct bnx2x *bp) 1473{ 1474 u32 val; 1475 1476 val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF); 1477 DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val); 1478 1479 val = REG_RD(bp, PBF_REG_DISABLE_PF); 1480 DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val); 1481 1482 val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN); 1483 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val); 1484 1485 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN); 1486 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val); 1487 1488 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK); 1489 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val); 1490 1491 val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR); 1492 DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val); 1493 1494 val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR); 1495 DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val); 1496 1497 val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER); 1498 DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n", 1499 val); 1500} 1501 1502static int bnx2x_pf_flr_clnup(struct bnx2x *bp) 1503{ 1504 u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); 1505 1506 DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp)); 1507 1508 /* Re-enable PF target read access */ 1509 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); 1510 1511 /* Poll HW usage counters */ 1512 DP(BNX2X_MSG_SP, "Polling usage counters\n"); 1513 if (bnx2x_poll_hw_usage_counters(bp, poll_cnt)) 1514 return -EBUSY; 1515 1516 /* Zero the igu 'trailing edge' and 'leading edge' */ 1517 1518 /* Send the FW cleanup command */ 1519 if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt)) 1520 return -EBUSY; 1521 1522 /* ATC cleanup */ 1523 1524 /* Verify TX hw is flushed */ 1525 bnx2x_tx_hw_flushed(bp, poll_cnt); 1526 1527 /* Wait 100ms (not adjusted according to platform) */ 1528 msleep(100); 1529 1530 /* Verify no pending pci transactions */ 1531 if (bnx2x_is_pcie_pending(bp->pdev)) 1532 BNX2X_ERR("PCIE Transactions still pending\n"); 1533 1534 /* Debug */ 1535 bnx2x_hw_enable_status(bp); 1536 1537 /* 1538 * Master enable - Due to WB DMAE writes performed before this 1539 * register is re-initialized as part of the regular function init 1540 */ 1541 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); 1542 1543 return 0; 1544} 1545 1546static void bnx2x_hc_int_enable(struct bnx2x *bp) 1547{ 1548 int port = BP_PORT(bp); 1549 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; 1550 u32 val = REG_RD(bp, addr); 1551 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; 1552 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; 1553 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; 1554 1555 if (msix) { 1556 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 1557 HC_CONFIG_0_REG_INT_LINE_EN_0); 1558 val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 1559 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 1560 if (single_msix) 1561 val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0; 1562 } else if (msi) { 1563 val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0; 1564 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 1565 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 1566 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 1567 } else { 1568 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 1569 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 1570 HC_CONFIG_0_REG_INT_LINE_EN_0 | 1571 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 1572 1573 if (!CHIP_IS_E1(bp)) { 1574 DP(NETIF_MSG_IFUP, 1575 "write %x to HC %d (addr 0x%x)\n", val, port, addr); 1576 1577 REG_WR(bp, addr, val); 1578 1579 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; 1580 } 1581 } 1582 1583 if (CHIP_IS_E1(bp)) 1584 REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF); 1585 1586 DP(NETIF_MSG_IFUP, 1587 "write %x to HC %d (addr 0x%x) mode %s\n", val, port, addr, 1588 (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); 1589 1590 REG_WR(bp, addr, val); 1591 /* 1592 * Ensure that HC_CONFIG is written before leading/trailing edge config 1593 */ 1594 mmiowb(); 1595 barrier(); 1596 1597 if (!CHIP_IS_E1(bp)) { 1598 /* init leading/trailing edge */ 1599 if (IS_MF(bp)) { 1600 val = (0xee0f | (1 << (BP_VN(bp) + 4))); 1601 if (bp->port.pmf) 1602 /* enable nig and gpio3 attention */ 1603 val |= 0x1100; 1604 } else 1605 val = 0xffff; 1606 1607 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); 1608 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); 1609 } 1610 1611 /* Make sure that interrupts are indeed enabled from here on */ 1612 mmiowb(); 1613} 1614 1615static void bnx2x_igu_int_enable(struct bnx2x *bp) 1616{ 1617 u32 val; 1618 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; 1619 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; 1620 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; 1621 1622 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); 1623 1624 if (msix) { 1625 val &= ~(IGU_PF_CONF_INT_LINE_EN | 1626 IGU_PF_CONF_SINGLE_ISR_EN); 1627 val |= (IGU_PF_CONF_MSI_MSIX_EN | 1628 IGU_PF_CONF_ATTN_BIT_EN); 1629 1630 if (single_msix) 1631 val |= IGU_PF_CONF_SINGLE_ISR_EN; 1632 } else if (msi) { 1633 val &= ~IGU_PF_CONF_INT_LINE_EN; 1634 val |= (IGU_PF_CONF_MSI_MSIX_EN | 1635 IGU_PF_CONF_ATTN_BIT_EN | 1636 IGU_PF_CONF_SINGLE_ISR_EN); 1637 } else { 1638 val &= ~IGU_PF_CONF_MSI_MSIX_EN; 1639 val |= (IGU_PF_CONF_INT_LINE_EN | 1640 IGU_PF_CONF_ATTN_BIT_EN | 1641 IGU_PF_CONF_SINGLE_ISR_EN); 1642 } 1643 1644 /* Clean previous status - need to configure igu prior to ack*/ 1645 if ((!msix) || single_msix) { 1646 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 1647 bnx2x_ack_int(bp); 1648 } 1649 1650 val |= IGU_PF_CONF_FUNC_EN; 1651 1652 DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n", 1653 val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); 1654 1655 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 1656 1657 if (val & IGU_PF_CONF_INT_LINE_EN) 1658 pci_intx(bp->pdev, true); 1659 1660 barrier(); 1661 1662 /* init leading/trailing edge */ 1663 if (IS_MF(bp)) { 1664 val = (0xee0f | (1 << (BP_VN(bp) + 4))); 1665 if (bp->port.pmf) 1666 /* enable nig and gpio3 attention */ 1667 val |= 0x1100; 1668 } else 1669 val = 0xffff; 1670 1671 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); 1672 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); 1673 1674 /* Make sure that interrupts are indeed enabled from here on */ 1675 mmiowb(); 1676} 1677 1678void bnx2x_int_enable(struct bnx2x *bp) 1679{ 1680 if (bp->common.int_block == INT_BLOCK_HC) 1681 bnx2x_hc_int_enable(bp); 1682 else 1683 bnx2x_igu_int_enable(bp); 1684} 1685 1686void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) 1687{ 1688 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; 1689 int i, offset; 1690 1691 if (disable_hw) 1692 /* prevent the HW from sending interrupts */ 1693 bnx2x_int_disable(bp); 1694 1695 /* make sure all ISRs are done */ 1696 if (msix) { 1697 synchronize_irq(bp->msix_table[0].vector); 1698 offset = 1; 1699 if (CNIC_SUPPORT(bp)) 1700 offset++; 1701 for_each_eth_queue(bp, i) 1702 synchronize_irq(bp->msix_table[offset++].vector); 1703 } else 1704 synchronize_irq(bp->pdev->irq); 1705 1706 /* make sure sp_task is not running */ 1707 cancel_delayed_work(&bp->sp_task); 1708 cancel_delayed_work(&bp->period_task); 1709 flush_workqueue(bnx2x_wq); 1710} 1711 1712/* fast path */ 1713 1714/* 1715 * General service functions 1716 */ 1717 1718/* Return true if succeeded to acquire the lock */ 1719static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource) 1720{ 1721 u32 lock_status; 1722 u32 resource_bit = (1 << resource); 1723 int func = BP_FUNC(bp); 1724 u32 hw_lock_control_reg; 1725 1726 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, 1727 "Trying to take a lock on resource %d\n", resource); 1728 1729 /* Validating that the resource is within range */ 1730 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { 1731 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, 1732 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", 1733 resource, HW_LOCK_MAX_RESOURCE_VALUE); 1734 return false; 1735 } 1736 1737 if (func <= 5) 1738 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); 1739 else 1740 hw_lock_control_reg = 1741 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); 1742 1743 /* Try to acquire the lock */ 1744 REG_WR(bp, hw_lock_control_reg + 4, resource_bit); 1745 lock_status = REG_RD(bp, hw_lock_control_reg); 1746 if (lock_status & resource_bit) 1747 return true; 1748 1749 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, 1750 "Failed to get a lock on resource %d\n", resource); 1751 return false; 1752} 1753 1754/** 1755 * bnx2x_get_leader_lock_resource - get the recovery leader resource id 1756 * 1757 * @bp: driver handle 1758 * 1759 * Returns the recovery leader resource id according to the engine this function 1760 * belongs to. Currently only only 2 engines is supported. 1761 */ 1762static int bnx2x_get_leader_lock_resource(struct bnx2x *bp) 1763{ 1764 if (BP_PATH(bp)) 1765 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1; 1766 else 1767 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0; 1768} 1769 1770/** 1771 * bnx2x_trylock_leader_lock- try to acquire a leader lock. 1772 * 1773 * @bp: driver handle 1774 * 1775 * Tries to acquire a leader lock for current engine. 1776 */ 1777static bool bnx2x_trylock_leader_lock(struct bnx2x *bp) 1778{ 1779 return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); 1780} 1781 1782static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err); 1783 1784/* schedule the sp task and mark that interrupt occurred (runs from ISR) */ 1785static int bnx2x_schedule_sp_task(struct bnx2x *bp) 1786{ 1787 /* Set the interrupt occurred bit for the sp-task to recognize it 1788 * must ack the interrupt and transition according to the IGU 1789 * state machine. 1790 */ 1791 atomic_set(&bp->interrupt_occurred, 1); 1792 1793 /* The sp_task must execute only after this bit 1794 * is set, otherwise we will get out of sync and miss all 1795 * further interrupts. Hence, the barrier. 1796 */ 1797 smp_wmb(); 1798 1799 /* schedule sp_task to workqueue */ 1800 return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); 1801} 1802 1803void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) 1804{ 1805 struct bnx2x *bp = fp->bp; 1806 int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data); 1807 int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data); 1808 enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX; 1809 struct bnx2x_queue_sp_obj *q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 1810 1811 DP(BNX2X_MSG_SP, 1812 "fp %d cid %d got ramrod #%d state is %x type is %d\n", 1813 fp->index, cid, command, bp->state, 1814 rr_cqe->ramrod_cqe.ramrod_type); 1815 1816 /* If cid is within VF range, replace the slowpath object with the 1817 * one corresponding to this VF 1818 */ 1819 if (cid >= BNX2X_FIRST_VF_CID && 1820 cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS) 1821 bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj); 1822 1823 switch (command) { 1824 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE): 1825 DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid); 1826 drv_cmd = BNX2X_Q_CMD_UPDATE; 1827 break; 1828 1829 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP): 1830 DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid); 1831 drv_cmd = BNX2X_Q_CMD_SETUP; 1832 break; 1833 1834 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP): 1835 DP(BNX2X_MSG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid); 1836 drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; 1837 break; 1838 1839 case (RAMROD_CMD_ID_ETH_HALT): 1840 DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid); 1841 drv_cmd = BNX2X_Q_CMD_HALT; 1842 break; 1843 1844 case (RAMROD_CMD_ID_ETH_TERMINATE): 1845 DP(BNX2X_MSG_SP, "got MULTI[%d] terminate ramrod\n", cid); 1846 drv_cmd = BNX2X_Q_CMD_TERMINATE; 1847 break; 1848 1849 case (RAMROD_CMD_ID_ETH_EMPTY): 1850 DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid); 1851 drv_cmd = BNX2X_Q_CMD_EMPTY; 1852 break; 1853 1854 case (RAMROD_CMD_ID_ETH_TPA_UPDATE): 1855 DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid); 1856 drv_cmd = BNX2X_Q_CMD_UPDATE_TPA; 1857 break; 1858 1859 default: 1860 BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n", 1861 command, fp->index); 1862 return; 1863 } 1864 1865 if ((drv_cmd != BNX2X_Q_CMD_MAX) && 1866 q_obj->complete_cmd(bp, q_obj, drv_cmd)) 1867 /* q_obj->complete_cmd() failure means that this was 1868 * an unexpected completion. 1869 * 1870 * In this case we don't want to increase the bp->spq_left 1871 * because apparently we haven't sent this command the first 1872 * place. 1873 */ 1874#ifdef BNX2X_STOP_ON_ERROR 1875 bnx2x_panic(); 1876#else 1877 return; 1878#endif 1879 1880 smp_mb__before_atomic(); 1881 atomic_inc(&bp->cq_spq_left); 1882 /* push the change in bp->spq_left and towards the memory */ 1883 smp_mb__after_atomic(); 1884 1885 DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left)); 1886 1887 if ((drv_cmd == BNX2X_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) && 1888 (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state))) { 1889 /* if Q update ramrod is completed for last Q in AFEX vif set 1890 * flow, then ACK MCP at the end 1891 * 1892 * mark pending ACK to MCP bit. 1893 * prevent case that both bits are cleared. 1894 * At the end of load/unload driver checks that 1895 * sp_state is cleared, and this order prevents 1896 * races 1897 */ 1898 smp_mb__before_atomic(); 1899 set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, &bp->sp_state); 1900 wmb(); 1901 clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); 1902 smp_mb__after_atomic(); 1903 1904 /* schedule the sp task as mcp ack is required */ 1905 bnx2x_schedule_sp_task(bp); 1906 } 1907 1908 return; 1909} 1910 1911irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) 1912{ 1913 struct bnx2x *bp = netdev_priv(dev_instance); 1914 u16 status = bnx2x_ack_int(bp); 1915 u16 mask; 1916 int i; 1917 u8 cos; 1918 1919 /* Return here if interrupt is shared and it's not for us */ 1920 if (unlikely(status == 0)) { 1921 DP(NETIF_MSG_INTR, "not our interrupt!\n"); 1922 return IRQ_NONE; 1923 } 1924 DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status); 1925 1926#ifdef BNX2X_STOP_ON_ERROR 1927 if (unlikely(bp->panic)) 1928 return IRQ_HANDLED; 1929#endif 1930 1931 for_each_eth_queue(bp, i) { 1932 struct bnx2x_fastpath *fp = &bp->fp[i]; 1933 1934 mask = 0x2 << (fp->index + CNIC_SUPPORT(bp)); 1935 if (status & mask) { 1936 /* Handle Rx or Tx according to SB id */ 1937 for_each_cos_in_tx_queue(fp, cos) 1938 prefetch(fp->txdata_ptr[cos]->tx_cons_sb); 1939 prefetch(&fp->sb_running_index[SM_RX_ID]); 1940 napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi)); 1941 status &= ~mask; 1942 } 1943 } 1944 1945 if (CNIC_SUPPORT(bp)) { 1946 mask = 0x2; 1947 if (status & (mask | 0x1)) { 1948 struct cnic_ops *c_ops = NULL; 1949 1950 rcu_read_lock(); 1951 c_ops = rcu_dereference(bp->cnic_ops); 1952 if (c_ops && (bp->cnic_eth_dev.drv_state & 1953 CNIC_DRV_STATE_HANDLES_IRQ)) 1954 c_ops->cnic_handler(bp->cnic_data, NULL); 1955 rcu_read_unlock(); 1956 1957 status &= ~mask; 1958 } 1959 } 1960 1961 if (unlikely(status & 0x1)) { 1962 1963 /* schedule sp task to perform default status block work, ack 1964 * attentions and enable interrupts. 1965 */ 1966 bnx2x_schedule_sp_task(bp); 1967 1968 status &= ~0x1; 1969 if (!status) 1970 return IRQ_HANDLED; 1971 } 1972 1973 if (unlikely(status)) 1974 DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n", 1975 status); 1976 1977 return IRQ_HANDLED; 1978} 1979 1980/* Link */ 1981 1982/* 1983 * General service functions 1984 */ 1985 1986int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource) 1987{ 1988 u32 lock_status; 1989 u32 resource_bit = (1 << resource); 1990 int func = BP_FUNC(bp); 1991 u32 hw_lock_control_reg; 1992 int cnt; 1993 1994 /* Validating that the resource is within range */ 1995 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { 1996 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", 1997 resource, HW_LOCK_MAX_RESOURCE_VALUE); 1998 return -EINVAL; 1999 } 2000 2001 if (func <= 5) { 2002 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); 2003 } else { 2004 hw_lock_control_reg = 2005 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); 2006 } 2007 2008 /* Validating that the resource is not already taken */ 2009 lock_status = REG_RD(bp, hw_lock_control_reg); 2010 if (lock_status & resource_bit) { 2011 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n", 2012 lock_status, resource_bit); 2013 return -EEXIST; 2014 } 2015 2016 /* Try for 5 second every 5ms */ 2017 for (cnt = 0; cnt < 1000; cnt++) { 2018 /* Try to acquire the lock */ 2019 REG_WR(bp, hw_lock_control_reg + 4, resource_bit); 2020 lock_status = REG_RD(bp, hw_lock_control_reg); 2021 if (lock_status & resource_bit) 2022 return 0; 2023 2024 usleep_range(5000, 10000); 2025 } 2026 BNX2X_ERR("Timeout\n"); 2027 return -EAGAIN; 2028} 2029 2030int bnx2x_release_leader_lock(struct bnx2x *bp) 2031{ 2032 return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); 2033} 2034 2035int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource) 2036{ 2037 u32 lock_status; 2038 u32 resource_bit = (1 << resource); 2039 int func = BP_FUNC(bp); 2040 u32 hw_lock_control_reg; 2041 2042 /* Validating that the resource is within range */ 2043 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { 2044 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", 2045 resource, HW_LOCK_MAX_RESOURCE_VALUE); 2046 return -EINVAL; 2047 } 2048 2049 if (func <= 5) { 2050 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); 2051 } else { 2052 hw_lock_control_reg = 2053 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); 2054 } 2055 2056 /* Validating that the resource is currently taken */ 2057 lock_status = REG_RD(bp, hw_lock_control_reg); 2058 if (!(lock_status & resource_bit)) { 2059 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n", 2060 lock_status, resource_bit); 2061 return -EFAULT; 2062 } 2063 2064 REG_WR(bp, hw_lock_control_reg, resource_bit); 2065 return 0; 2066} 2067 2068int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port) 2069{ 2070 /* The GPIO should be swapped if swap register is set and active */ 2071 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && 2072 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; 2073 int gpio_shift = gpio_num + 2074 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); 2075 u32 gpio_mask = (1 << gpio_shift); 2076 u32 gpio_reg; 2077 int value; 2078 2079 if (gpio_num > MISC_REGISTERS_GPIO_3) { 2080 BNX2X_ERR("Invalid GPIO %d\n", gpio_num); 2081 return -EINVAL; 2082 } 2083 2084 /* read GPIO value */ 2085 gpio_reg = REG_RD(bp, MISC_REG_GPIO); 2086 2087 /* get the requested pin value */ 2088 if ((gpio_reg & gpio_mask) == gpio_mask) 2089 value = 1; 2090 else 2091 value = 0; 2092 2093 return value; 2094} 2095 2096int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) 2097{ 2098 /* The GPIO should be swapped if swap register is set and active */ 2099 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && 2100 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; 2101 int gpio_shift = gpio_num + 2102 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); 2103 u32 gpio_mask = (1 << gpio_shift); 2104 u32 gpio_reg; 2105 2106 if (gpio_num > MISC_REGISTERS_GPIO_3) { 2107 BNX2X_ERR("Invalid GPIO %d\n", gpio_num); 2108 return -EINVAL; 2109 } 2110 2111 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2112 /* read GPIO and mask except the float bits */ 2113 gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); 2114 2115 switch (mode) { 2116 case MISC_REGISTERS_GPIO_OUTPUT_LOW: 2117 DP(NETIF_MSG_LINK, 2118 "Set GPIO %d (shift %d) -> output low\n", 2119 gpio_num, gpio_shift); 2120 /* clear FLOAT and set CLR */ 2121 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); 2122 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); 2123 break; 2124 2125 case MISC_REGISTERS_GPIO_OUTPUT_HIGH: 2126 DP(NETIF_MSG_LINK, 2127 "Set GPIO %d (shift %d) -> output high\n", 2128 gpio_num, gpio_shift); 2129 /* clear FLOAT and set SET */ 2130 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); 2131 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); 2132 break; 2133 2134 case MISC_REGISTERS_GPIO_INPUT_HI_Z: 2135 DP(NETIF_MSG_LINK, 2136 "Set GPIO %d (shift %d) -> input\n", 2137 gpio_num, gpio_shift); 2138 /* set FLOAT */ 2139 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); 2140 break; 2141 2142 default: 2143 break; 2144 } 2145 2146 REG_WR(bp, MISC_REG_GPIO, gpio_reg); 2147 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2148 2149 return 0; 2150} 2151 2152int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode) 2153{ 2154 u32 gpio_reg = 0; 2155 int rc = 0; 2156 2157 /* Any port swapping should be handled by caller. */ 2158 2159 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2160 /* read GPIO and mask except the float bits */ 2161 gpio_reg = REG_RD(bp, MISC_REG_GPIO); 2162 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS); 2163 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS); 2164 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS); 2165 2166 switch (mode) { 2167 case MISC_REGISTERS_GPIO_OUTPUT_LOW: 2168 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins); 2169 /* set CLR */ 2170 gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS); 2171 break; 2172 2173 case MISC_REGISTERS_GPIO_OUTPUT_HIGH: 2174 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins); 2175 /* set SET */ 2176 gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS); 2177 break; 2178 2179 case MISC_REGISTERS_GPIO_INPUT_HI_Z: 2180 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins); 2181 /* set FLOAT */ 2182 gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS); 2183 break; 2184 2185 default: 2186 BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode); 2187 rc = -EINVAL; 2188 break; 2189 } 2190 2191 if (rc == 0) 2192 REG_WR(bp, MISC_REG_GPIO, gpio_reg); 2193 2194 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2195 2196 return rc; 2197} 2198 2199int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) 2200{ 2201 /* The GPIO should be swapped if swap register is set and active */ 2202 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && 2203 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; 2204 int gpio_shift = gpio_num + 2205 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); 2206 u32 gpio_mask = (1 << gpio_shift); 2207 u32 gpio_reg; 2208 2209 if (gpio_num > MISC_REGISTERS_GPIO_3) { 2210 BNX2X_ERR("Invalid GPIO %d\n", gpio_num); 2211 return -EINVAL; 2212 } 2213 2214 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2215 /* read GPIO int */ 2216 gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT); 2217 2218 switch (mode) { 2219 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR: 2220 DP(NETIF_MSG_LINK, 2221 "Clear GPIO INT %d (shift %d) -> output low\n", 2222 gpio_num, gpio_shift); 2223 /* clear SET and set CLR */ 2224 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); 2225 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); 2226 break; 2227 2228 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET: 2229 DP(NETIF_MSG_LINK, 2230 "Set GPIO INT %d (shift %d) -> output high\n", 2231 gpio_num, gpio_shift); 2232 /* clear CLR and set SET */ 2233 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); 2234 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); 2235 break; 2236 2237 default: 2238 break; 2239 } 2240 2241 REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg); 2242 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2243 2244 return 0; 2245} 2246 2247static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode) 2248{ 2249 u32 spio_reg; 2250 2251 /* Only 2 SPIOs are configurable */ 2252 if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) { 2253 BNX2X_ERR("Invalid SPIO 0x%x\n", spio); 2254 return -EINVAL; 2255 } 2256 2257 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); 2258 /* read SPIO and mask except the float bits */ 2259 spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_SPIO_FLOAT); 2260 2261 switch (mode) { 2262 case MISC_SPIO_OUTPUT_LOW: 2263 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output low\n", spio); 2264 /* clear FLOAT and set CLR */ 2265 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); 2266 spio_reg |= (spio << MISC_SPIO_CLR_POS); 2267 break; 2268 2269 case MISC_SPIO_OUTPUT_HIGH: 2270 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output high\n", spio); 2271 /* clear FLOAT and set SET */ 2272 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); 2273 spio_reg |= (spio << MISC_SPIO_SET_POS); 2274 break; 2275 2276 case MISC_SPIO_INPUT_HI_Z: 2277 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> input\n", spio); 2278 /* set FLOAT */ 2279 spio_reg |= (spio << MISC_SPIO_FLOAT_POS); 2280 break; 2281 2282 default: 2283 break; 2284 } 2285 2286 REG_WR(bp, MISC_REG_SPIO, spio_reg); 2287 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); 2288 2289 return 0; 2290} 2291 2292void bnx2x_calc_fc_adv(struct bnx2x *bp) 2293{ 2294 u8 cfg_idx = bnx2x_get_link_cfg_idx(bp); 2295 2296 bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | 2297 ADVERTISED_Pause); 2298 switch (bp->link_vars.ieee_fc & 2299 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) { 2300 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: 2301 bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause | 2302 ADVERTISED_Pause); 2303 break; 2304 2305 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC: 2306 bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause; 2307 break; 2308 2309 default: 2310 break; 2311 } 2312} 2313 2314static void bnx2x_set_requested_fc(struct bnx2x *bp) 2315{ 2316 /* Initialize link parameters structure variables 2317 * It is recommended to turn off RX FC for jumbo frames 2318 * for better performance 2319 */ 2320 if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000)) 2321 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; 2322 else 2323 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; 2324} 2325 2326static void bnx2x_init_dropless_fc(struct bnx2x *bp) 2327{ 2328 u32 pause_enabled = 0; 2329 2330 if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) { 2331 if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) 2332 pause_enabled = 1; 2333 2334 REG_WR(bp, BAR_USTRORM_INTMEM + 2335 USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)), 2336 pause_enabled); 2337 } 2338 2339 DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n", 2340 pause_enabled ? "enabled" : "disabled"); 2341} 2342 2343int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) 2344{ 2345 int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp); 2346 u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx]; 2347 2348 if (!BP_NOMCP(bp)) { 2349 bnx2x_set_requested_fc(bp); 2350 bnx2x_acquire_phy_lock(bp); 2351 2352 if (load_mode == LOAD_DIAG) { 2353 struct link_params *lp = &bp->link_params; 2354 lp->loopback_mode = LOOPBACK_XGXS; 2355 /* Prefer doing PHY loopback at highest speed */ 2356 if (lp->req_line_speed[cfx_idx] < SPEED_20000) { 2357 if (lp->speed_cap_mask[cfx_idx] & 2358 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G) 2359 lp->req_line_speed[cfx_idx] = 2360 SPEED_20000; 2361 else if (lp->speed_cap_mask[cfx_idx] & 2362 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) 2363 lp->req_line_speed[cfx_idx] = 2364 SPEED_10000; 2365 else 2366 lp->req_line_speed[cfx_idx] = 2367 SPEED_1000; 2368 } 2369 } 2370 2371 if (load_mode == LOAD_LOOPBACK_EXT) { 2372 struct link_params *lp = &bp->link_params; 2373 lp->loopback_mode = LOOPBACK_EXT; 2374 } 2375 2376 rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); 2377 2378 bnx2x_release_phy_lock(bp); 2379 2380 bnx2x_init_dropless_fc(bp); 2381 2382 bnx2x_calc_fc_adv(bp); 2383 2384 if (bp->link_vars.link_up) { 2385 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2386 bnx2x_link_report(bp); 2387 } 2388 queue_delayed_work(bnx2x_wq, &bp->period_task, 0); 2389 bp->link_params.req_line_speed[cfx_idx] = req_line_speed; 2390 return rc; 2391 } 2392 BNX2X_ERR("Bootcode is missing - can not initialize link\n"); 2393 return -EINVAL; 2394} 2395 2396void bnx2x_link_set(struct bnx2x *bp) 2397{ 2398 if (!BP_NOMCP(bp)) { 2399 bnx2x_acquire_phy_lock(bp); 2400 bnx2x_phy_init(&bp->link_params, &bp->link_vars); 2401 bnx2x_release_phy_lock(bp); 2402 2403 bnx2x_init_dropless_fc(bp); 2404 2405 bnx2x_calc_fc_adv(bp); 2406 } else 2407 BNX2X_ERR("Bootcode is missing - can not set link\n"); 2408} 2409 2410static void bnx2x__link_reset(struct bnx2x *bp) 2411{ 2412 if (!BP_NOMCP(bp)) { 2413 bnx2x_acquire_phy_lock(bp); 2414 bnx2x_lfa_reset(&bp->link_params, &bp->link_vars); 2415 bnx2x_release_phy_lock(bp); 2416 } else 2417 BNX2X_ERR("Bootcode is missing - can not reset link\n"); 2418} 2419 2420void bnx2x_force_link_reset(struct bnx2x *bp) 2421{ 2422 bnx2x_acquire_phy_lock(bp); 2423 bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); 2424 bnx2x_release_phy_lock(bp); 2425} 2426 2427u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes) 2428{ 2429 u8 rc = 0; 2430 2431 if (!BP_NOMCP(bp)) { 2432 bnx2x_acquire_phy_lock(bp); 2433 rc = bnx2x_test_link(&bp->link_params, &bp->link_vars, 2434 is_serdes); 2435 bnx2x_release_phy_lock(bp); 2436 } else 2437 BNX2X_ERR("Bootcode is missing - can not test link\n"); 2438 2439 return rc; 2440} 2441 2442/* Calculates the sum of vn_min_rates. 2443 It's needed for further normalizing of the min_rates. 2444 Returns: 2445 sum of vn_min_rates. 2446 or 2447 0 - if all the min_rates are 0. 2448 In the later case fairness algorithm should be deactivated. 2449 If not all min_rates are zero then those that are zeroes will be set to 1. 2450 */ 2451static void bnx2x_calc_vn_min(struct bnx2x *bp, 2452 struct cmng_init_input *input) 2453{ 2454 int all_zero = 1; 2455 int vn; 2456 2457 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { 2458 u32 vn_cfg = bp->mf_config[vn]; 2459 u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> 2460 FUNC_MF_CFG_MIN_BW_SHIFT) * 100; 2461 2462 /* Skip hidden vns */ 2463 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) 2464 vn_min_rate = 0; 2465 /* If min rate is zero - set it to 1 */ 2466 else if (!vn_min_rate) 2467 vn_min_rate = DEF_MIN_RATE; 2468 else 2469 all_zero = 0; 2470 2471 input->vnic_min_rate[vn] = vn_min_rate; 2472 } 2473 2474 /* if ETS or all min rates are zeros - disable fairness */ 2475 if (BNX2X_IS_ETS_ENABLED(bp)) { 2476 input->flags.cmng_enables &= 2477 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; 2478 DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n"); 2479 } else if (all_zero) { 2480 input->flags.cmng_enables &= 2481 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; 2482 DP(NETIF_MSG_IFUP, 2483 "All MIN values are zeroes fairness will be disabled\n"); 2484 } else 2485 input->flags.cmng_enables |= 2486 CMNG_FLAGS_PER_PORT_FAIRNESS_VN; 2487} 2488 2489static void bnx2x_calc_vn_max(struct bnx2x *bp, int vn, 2490 struct cmng_init_input *input) 2491{ 2492 u16 vn_max_rate; 2493 u32 vn_cfg = bp->mf_config[vn]; 2494 2495 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) 2496 vn_max_rate = 0; 2497 else { 2498 u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg); 2499 2500 if (IS_MF_PERCENT_BW(bp)) { 2501 /* maxCfg in percents of linkspeed */ 2502 vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100; 2503 } else /* SD modes */ 2504 /* maxCfg is absolute in 100Mb units */ 2505 vn_max_rate = maxCfg * 100; 2506 } 2507 2508 DP(NETIF_MSG_IFUP, "vn %d: vn_max_rate %d\n", vn, vn_max_rate); 2509 2510 input->vnic_max_rate[vn] = vn_max_rate; 2511} 2512 2513static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp) 2514{ 2515 if (CHIP_REV_IS_SLOW(bp)) 2516 return CMNG_FNS_NONE; 2517 if (IS_MF(bp)) 2518 return CMNG_FNS_MINMAX; 2519 2520 return CMNG_FNS_NONE; 2521} 2522 2523void bnx2x_read_mf_cfg(struct bnx2x *bp) 2524{ 2525 int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1); 2526 2527 if (BP_NOMCP(bp)) 2528 return; /* what should be the default value in this case */ 2529 2530 /* For 2 port configuration the absolute function number formula 2531 * is: 2532 * abs_func = 2 * vn + BP_PORT + BP_PATH 2533 * 2534 * and there are 4 functions per port 2535 * 2536 * For 4 port configuration it is 2537 * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH 2538 * 2539 * and there are 2 functions per port 2540 */ 2541 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { 2542 int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); 2543 2544 if (func >= E1H_FUNC_MAX) 2545 break; 2546 2547 bp->mf_config[vn] = 2548 MF_CFG_RD(bp, func_mf_config[func].config); 2549 } 2550 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { 2551 DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n"); 2552 bp->flags |= MF_FUNC_DIS; 2553 } else { 2554 DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n"); 2555 bp->flags &= ~MF_FUNC_DIS; 2556 } 2557} 2558 2559static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) 2560{ 2561 struct cmng_init_input input; 2562 memset(&input, 0, sizeof(struct cmng_init_input)); 2563 2564 input.port_rate = bp->link_vars.line_speed; 2565 2566 if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) { 2567 int vn; 2568 2569 /* read mf conf from shmem */ 2570 if (read_cfg) 2571 bnx2x_read_mf_cfg(bp); 2572 2573 /* vn_weight_sum and enable fairness if not 0 */ 2574 bnx2x_calc_vn_min(bp, &input); 2575 2576 /* calculate and set min-max rate for each vn */ 2577 if (bp->port.pmf) 2578 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) 2579 bnx2x_calc_vn_max(bp, vn, &input); 2580 2581 /* always enable rate shaping and fairness */ 2582 input.flags.cmng_enables |= 2583 CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN; 2584 2585 bnx2x_init_cmng(&input, &bp->cmng); 2586 return; 2587 } 2588 2589 /* rate shaping and fairness are disabled */ 2590 DP(NETIF_MSG_IFUP, 2591 "rate shaping and fairness are disabled\n"); 2592} 2593 2594static void storm_memset_cmng(struct bnx2x *bp, 2595 struct cmng_init *cmng, 2596 u8 port) 2597{ 2598 int vn; 2599 size_t size = sizeof(struct cmng_struct_per_port); 2600 2601 u32 addr = BAR_XSTRORM_INTMEM + 2602 XSTORM_CMNG_PER_PORT_VARS_OFFSET(port); 2603 2604 __storm_memset_struct(bp, addr, size, (u32 *)&cmng->port); 2605 2606 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { 2607 int func = func_by_vn(bp, vn); 2608 2609 addr = BAR_XSTRORM_INTMEM + 2610 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func); 2611 size = sizeof(struct rate_shaping_vars_per_vn); 2612 __storm_memset_struct(bp, addr, size, 2613 (u32 *)&cmng->vnic.vnic_max_rate[vn]); 2614 2615 addr = BAR_XSTRORM_INTMEM + 2616 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func); 2617 size = sizeof(struct fairness_vars_per_vn); 2618 __storm_memset_struct(bp, addr, size, 2619 (u32 *)&cmng->vnic.vnic_min_rate[vn]); 2620 } 2621} 2622 2623/* init cmng mode in HW according to local configuration */ 2624void bnx2x_set_local_cmng(struct bnx2x *bp) 2625{ 2626 int cmng_fns = bnx2x_get_cmng_fns_mode(bp); 2627 2628 if (cmng_fns != CMNG_FNS_NONE) { 2629 bnx2x_cmng_fns_init(bp, false, cmng_fns); 2630 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); 2631 } else { 2632 /* rate shaping and fairness are disabled */ 2633 DP(NETIF_MSG_IFUP, 2634 "single function mode without fairness\n"); 2635 } 2636} 2637 2638/* This function is called upon link interrupt */ 2639static void bnx2x_link_attn(struct bnx2x *bp) 2640{ 2641 /* Make sure that we are synced with the current statistics */ 2642 bnx2x_stats_handle(bp, STATS_EVENT_STOP); 2643 2644 bnx2x_link_update(&bp->link_params, &bp->link_vars); 2645 2646 bnx2x_init_dropless_fc(bp); 2647 2648 if (bp->link_vars.link_up) { 2649 2650 if (bp->link_vars.mac_type != MAC_TYPE_EMAC) { 2651 struct host_port_stats *pstats; 2652 2653 pstats = bnx2x_sp(bp, port_stats); 2654 /* reset old mac stats */ 2655 memset(&(pstats->mac_stx[0]), 0, 2656 sizeof(struct mac_stx)); 2657 } 2658 if (bp->state == BNX2X_STATE_OPEN) 2659 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2660 } 2661 2662 if (bp->link_vars.link_up && bp->link_vars.line_speed) 2663 bnx2x_set_local_cmng(bp); 2664 2665 __bnx2x_link_report(bp); 2666 2667 if (IS_MF(bp)) 2668 bnx2x_link_sync_notify(bp); 2669} 2670 2671void bnx2x__link_status_update(struct bnx2x *bp) 2672{ 2673 if (bp->state != BNX2X_STATE_OPEN) 2674 return; 2675 2676 /* read updated dcb configuration */ 2677 if (IS_PF(bp)) { 2678 bnx2x_dcbx_pmf_update(bp); 2679 bnx2x_link_status_update(&bp->link_params, &bp->link_vars); 2680 if (bp->link_vars.link_up) 2681 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2682 else 2683 bnx2x_stats_handle(bp, STATS_EVENT_STOP); 2684 /* indicate link status */ 2685 bnx2x_link_report(bp); 2686 2687 } else { /* VF */ 2688 bp->port.supported[0] |= (SUPPORTED_10baseT_Half | 2689 SUPPORTED_10baseT_Full | 2690 SUPPORTED_100baseT_Half | 2691 SUPPORTED_100baseT_Full | 2692 SUPPORTED_1000baseT_Full | 2693 SUPPORTED_2500baseX_Full | 2694 SUPPORTED_10000baseT_Full | 2695 SUPPORTED_TP | 2696 SUPPORTED_FIBRE | 2697 SUPPORTED_Autoneg | 2698 SUPPORTED_Pause | 2699 SUPPORTED_Asym_Pause); 2700 bp->port.advertising[0] = bp->port.supported[0]; 2701 2702 bp->link_params.bp = bp; 2703 bp->link_params.port = BP_PORT(bp); 2704 bp->link_params.req_duplex[0] = DUPLEX_FULL; 2705 bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE; 2706 bp->link_params.req_line_speed[0] = SPEED_10000; 2707 bp->link_params.speed_cap_mask[0] = 0x7f0000; 2708 bp->link_params.switch_cfg = SWITCH_CFG_10G; 2709 bp->link_vars.mac_type = MAC_TYPE_BMAC; 2710 bp->link_vars.line_speed = SPEED_10000; 2711 bp->link_vars.link_status = 2712 (LINK_STATUS_LINK_UP | 2713 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD); 2714 bp->link_vars.link_up = 1; 2715 bp->link_vars.duplex = DUPLEX_FULL; 2716 bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE; 2717 __bnx2x_link_report(bp); 2718 2719 bnx2x_sample_bulletin(bp); 2720 2721 /* if bulletin board did not have an update for link status 2722 * __bnx2x_link_report will report current status 2723 * but it will NOT duplicate report in case of already reported 2724 * during sampling bulletin board. 2725 */ 2726 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2727 } 2728} 2729 2730static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, 2731 u16 vlan_val, u8 allowed_prio) 2732{ 2733 struct bnx2x_func_state_params func_params = {NULL}; 2734 struct bnx2x_func_afex_update_params *f_update_params = 2735 &func_params.params.afex_update; 2736 2737 func_params.f_obj = &bp->func_obj; 2738 func_params.cmd = BNX2X_F_CMD_AFEX_UPDATE; 2739 2740 /* no need to wait for RAMROD completion, so don't 2741 * set RAMROD_COMP_WAIT flag 2742 */ 2743 2744 f_update_params->vif_id = vifid; 2745 f_update_params->afex_default_vlan = vlan_val; 2746 f_update_params->allowed_priorities = allowed_prio; 2747 2748 /* if ramrod can not be sent, response to MCP immediately */ 2749 if (bnx2x_func_state_change(bp, &func_params) < 0) 2750 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); 2751 2752 return 0; 2753} 2754 2755static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type, 2756 u16 vif_index, u8 func_bit_map) 2757{ 2758 struct bnx2x_func_state_params func_params = {NULL}; 2759 struct bnx2x_func_afex_viflists_params *update_params = 2760 &func_params.params.afex_viflists; 2761 int rc; 2762 u32 drv_msg_code; 2763 2764 /* validate only LIST_SET and LIST_GET are received from switch */ 2765 if ((cmd_type != VIF_LIST_RULE_GET) && (cmd_type != VIF_LIST_RULE_SET)) 2766 BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n", 2767 cmd_type); 2768 2769 func_params.f_obj = &bp->func_obj; 2770 func_params.cmd = BNX2X_F_CMD_AFEX_VIFLISTS; 2771 2772 /* set parameters according to cmd_type */ 2773 update_params->afex_vif_list_command = cmd_type; 2774 update_params->vif_list_index = vif_index; 2775 update_params->func_bit_map = 2776 (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map; 2777 update_params->func_to_clear = 0; 2778 drv_msg_code = 2779 (cmd_type == VIF_LIST_RULE_GET) ? 2780 DRV_MSG_CODE_AFEX_LISTGET_ACK : 2781 DRV_MSG_CODE_AFEX_LISTSET_ACK; 2782 2783 /* if ramrod can not be sent, respond to MCP immediately for 2784 * SET and GET requests (other are not triggered from MCP) 2785 */ 2786 rc = bnx2x_func_state_change(bp, &func_params); 2787 if (rc < 0) 2788 bnx2x_fw_command(bp, drv_msg_code, 0); 2789 2790 return 0; 2791} 2792 2793static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd) 2794{ 2795 struct afex_stats afex_stats; 2796 u32 func = BP_ABS_FUNC(bp); 2797 u32 mf_config; 2798 u16 vlan_val; 2799 u32 vlan_prio; 2800 u16 vif_id; 2801 u8 allowed_prio; 2802 u8 vlan_mode; 2803 u32 addr_to_write, vifid, addrs, stats_type, i; 2804 2805 if (cmd & DRV_STATUS_AFEX_LISTGET_REQ) { 2806 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); 2807 DP(BNX2X_MSG_MCP, 2808 "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid); 2809 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_GET, vifid, 0); 2810 } 2811 2812 if (cmd & DRV_STATUS_AFEX_LISTSET_REQ) { 2813 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); 2814 addrs = SHMEM2_RD(bp, afex_param2_to_driver[BP_FW_MB_IDX(bp)]); 2815 DP(BNX2X_MSG_MCP, 2816 "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n", 2817 vifid, addrs); 2818 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_SET, vifid, 2819 addrs); 2820 } 2821 2822 if (cmd & DRV_STATUS_AFEX_STATSGET_REQ) { 2823 addr_to_write = SHMEM2_RD(bp, 2824 afex_scratchpad_addr_to_write[BP_FW_MB_IDX(bp)]); 2825 stats_type = SHMEM2_RD(bp, 2826 afex_param1_to_driver[BP_FW_MB_IDX(bp)]); 2827 2828 DP(BNX2X_MSG_MCP, 2829 "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n", 2830 addr_to_write); 2831 2832 bnx2x_afex_collect_stats(bp, (void *)&afex_stats, stats_type); 2833 2834 /* write response to scratchpad, for MCP */ 2835 for (i = 0; i < (sizeof(struct afex_stats)/sizeof(u32)); i++) 2836 REG_WR(bp, addr_to_write + i*sizeof(u32), 2837 *(((u32 *)(&afex_stats))+i)); 2838 2839 /* send ack message to MCP */ 2840 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_STATSGET_ACK, 0); 2841 } 2842 2843 if (cmd & DRV_STATUS_AFEX_VIFSET_REQ) { 2844 mf_config = MF_CFG_RD(bp, func_mf_config[func].config); 2845 bp->mf_config[BP_VN(bp)] = mf_config; 2846 DP(BNX2X_MSG_MCP, 2847 "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n", 2848 mf_config); 2849 2850 /* if VIF_SET is "enabled" */ 2851 if (!(mf_config & FUNC_MF_CFG_FUNC_DISABLED)) { 2852 /* set rate limit directly to internal RAM */ 2853 struct cmng_init_input cmng_input; 2854 struct rate_shaping_vars_per_vn m_rs_vn; 2855 size_t size = sizeof(struct rate_shaping_vars_per_vn); 2856 u32 addr = BAR_XSTRORM_INTMEM + 2857 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp)); 2858 2859 bp->mf_config[BP_VN(bp)] = mf_config; 2860 2861 bnx2x_calc_vn_max(bp, BP_VN(bp), &cmng_input); 2862 m_rs_vn.vn_counter.rate = 2863 cmng_input.vnic_max_rate[BP_VN(bp)]; 2864 m_rs_vn.vn_counter.quota = 2865 (m_rs_vn.vn_counter.rate * 2866 RS_PERIODIC_TIMEOUT_USEC) / 8; 2867 2868 __storm_memset_struct(bp, addr, size, (u32 *)&m_rs_vn); 2869 2870 /* read relevant values from mf_cfg struct in shmem */ 2871 vif_id = 2872 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 2873 FUNC_MF_CFG_E1HOV_TAG_MASK) >> 2874 FUNC_MF_CFG_E1HOV_TAG_SHIFT; 2875 vlan_val = 2876 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 2877 FUNC_MF_CFG_AFEX_VLAN_MASK) >> 2878 FUNC_MF_CFG_AFEX_VLAN_SHIFT; 2879 vlan_prio = (mf_config & 2880 FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >> 2881 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT; 2882 vlan_val |= (vlan_prio << VLAN_PRIO_SHIFT); 2883 vlan_mode = 2884 (MF_CFG_RD(bp, 2885 func_mf_config[func].afex_config) & 2886 FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >> 2887 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT; 2888 allowed_prio = 2889 (MF_CFG_RD(bp, 2890 func_mf_config[func].afex_config) & 2891 FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >> 2892 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT; 2893 2894 /* send ramrod to FW, return in case of failure */ 2895 if (bnx2x_afex_func_update(bp, vif_id, vlan_val, 2896 allowed_prio)) 2897 return; 2898 2899 bp->afex_def_vlan_tag = vlan_val; 2900 bp->afex_vlan_mode = vlan_mode; 2901 } else { 2902 /* notify link down because BP->flags is disabled */ 2903 bnx2x_link_report(bp); 2904 2905 /* send INVALID VIF ramrod to FW */ 2906 bnx2x_afex_func_update(bp, 0xFFFF, 0, 0); 2907 2908 /* Reset the default afex VLAN */ 2909 bp->afex_def_vlan_tag = -1; 2910 } 2911 } 2912} 2913 2914static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp) 2915{ 2916 struct bnx2x_func_switch_update_params *switch_update_params; 2917 struct bnx2x_func_state_params func_params; 2918 2919 memset(&func_params, 0, sizeof(struct bnx2x_func_state_params)); 2920 switch_update_params = &func_params.params.switch_update; 2921 func_params.f_obj = &bp->func_obj; 2922 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; 2923 2924 if (IS_MF_UFP(bp) || IS_MF_BD(bp)) { 2925 int func = BP_ABS_FUNC(bp); 2926 u32 val; 2927 2928 /* Re-learn the S-tag from shmem */ 2929 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 2930 FUNC_MF_CFG_E1HOV_TAG_MASK; 2931 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { 2932 bp->mf_ov = val; 2933 } else { 2934 BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n"); 2935 goto fail; 2936 } 2937 2938 /* Configure new S-tag in LLH */ 2939 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8, 2940 bp->mf_ov); 2941 2942 /* Send Ramrod to update FW of change */ 2943 __set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, 2944 &switch_update_params->changes); 2945 switch_update_params->vlan = bp->mf_ov; 2946 2947 if (bnx2x_func_state_change(bp, &func_params) < 0) { 2948 BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n", 2949 bp->mf_ov); 2950 goto fail; 2951 } else { 2952 DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", 2953 bp->mf_ov); 2954 } 2955 } else { 2956 goto fail; 2957 } 2958 2959 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0); 2960 return; 2961fail: 2962 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0); 2963} 2964 2965static void bnx2x_pmf_update(struct bnx2x *bp) 2966{ 2967 int port = BP_PORT(bp); 2968 u32 val; 2969 2970 bp->port.pmf = 1; 2971 DP(BNX2X_MSG_MCP, "pmf %d\n", bp->port.pmf); 2972 2973 /* 2974 * We need the mb() to ensure the ordering between the writing to 2975 * bp->port.pmf here and reading it from the bnx2x_periodic_task(). 2976 */ 2977 smp_mb(); 2978 2979 /* queue a periodic task */ 2980 queue_delayed_work(bnx2x_wq, &bp->period_task, 0); 2981 2982 bnx2x_dcbx_pmf_update(bp); 2983 2984 /* enable nig attention */ 2985 val = (0xff0f | (1 << (BP_VN(bp) + 4))); 2986 if (bp->common.int_block == INT_BLOCK_HC) { 2987 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); 2988 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); 2989 } else if (!CHIP_IS_E1x(bp)) { 2990 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); 2991 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); 2992 } 2993 2994 bnx2x_stats_handle(bp, STATS_EVENT_PMF); 2995} 2996 2997/* end of Link */ 2998 2999/* slow path */ 3000 3001/* 3002 * General service functions 3003 */ 3004 3005/* send the MCP a request, block until there is a reply */ 3006u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param) 3007{ 3008 int mb_idx = BP_FW_MB_IDX(bp); 3009 u32 seq; 3010 u32 rc = 0; 3011 u32 cnt = 1; 3012 u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10; 3013 3014 mutex_lock(&bp->fw_mb_mutex); 3015 seq = ++bp->fw_seq; 3016 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param); 3017 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq)); 3018 3019 DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n", 3020 (command | seq), param); 3021 3022 do { 3023 /* let the FW do it's magic ... */ 3024 msleep(delay); 3025 3026 rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header); 3027 3028 /* Give the FW up to 5 second (500*10ms) */ 3029 } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500)); 3030 3031 DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n", 3032 cnt*delay, rc, seq); 3033 3034 /* is this a reply to our command? */ 3035 if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) 3036 rc &= FW_MSG_CODE_MASK; 3037 else { 3038 /* FW BUG! */ 3039 BNX2X_ERR("FW failed to respond!\n"); 3040 bnx2x_fw_dump(bp); 3041 rc = 0; 3042 } 3043 mutex_unlock(&bp->fw_mb_mutex); 3044 3045 return rc; 3046} 3047 3048static void storm_memset_func_cfg(struct bnx2x *bp, 3049 struct tstorm_eth_function_common_config *tcfg, 3050 u16 abs_fid) 3051{ 3052 size_t size = sizeof(struct tstorm_eth_function_common_config); 3053 3054 u32 addr = BAR_TSTRORM_INTMEM + 3055 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid); 3056 3057 __storm_memset_struct(bp, addr, size, (u32 *)tcfg); 3058} 3059 3060void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p) 3061{ 3062 if (CHIP_IS_E1x(bp)) { 3063 struct tstorm_eth_function_common_config tcfg = {0}; 3064 3065 storm_memset_func_cfg(bp, &tcfg, p->func_id); 3066 } 3067 3068 /* Enable the function in the FW */ 3069 storm_memset_vf_to_pf(bp, p->func_id, p->pf_id); 3070 storm_memset_func_en(bp, p->func_id, 1); 3071 3072 /* spq */ 3073 if (p->spq_active) { 3074 storm_memset_spq_addr(bp, p->spq_map, p->func_id); 3075 REG_WR(bp, XSEM_REG_FAST_MEMORY + 3076 XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod); 3077 } 3078} 3079 3080/** 3081 * bnx2x_get_common_flags - Return common flags 3082 * 3083 * @bp device handle 3084 * @fp queue handle 3085 * @zero_stats TRUE if statistics zeroing is needed 3086 * 3087 * Return the flags that are common for the Tx-only and not normal connections. 3088 */ 3089static unsigned long bnx2x_get_common_flags(struct bnx2x *bp, 3090 struct bnx2x_fastpath *fp, 3091 bool zero_stats) 3092{ 3093 unsigned long flags = 0; 3094 3095 /* PF driver will always initialize the Queue to an ACTIVE state */ 3096 __set_bit(BNX2X_Q_FLG_ACTIVE, &flags); 3097 3098 /* tx only connections collect statistics (on the same index as the 3099 * parent connection). The statistics are zeroed when the parent 3100 * connection is initialized. 3101 */ 3102 3103 __set_bit(BNX2X_Q_FLG_STATS, &flags); 3104 if (zero_stats) 3105 __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags); 3106 3107 if (bp->flags & TX_SWITCHING) 3108 __set_bit(BNX2X_Q_FLG_TX_SWITCH, &flags); 3109 3110 __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags); 3111 __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, &flags); 3112 3113#ifdef BNX2X_STOP_ON_ERROR 3114 __set_bit(BNX2X_Q_FLG_TX_SEC, &flags); 3115#endif 3116 3117 return flags; 3118} 3119 3120static unsigned long bnx2x_get_q_flags(struct bnx2x *bp, 3121 struct bnx2x_fastpath *fp, 3122 bool leading) 3123{ 3124 unsigned long flags = 0; 3125 3126 /* calculate other queue flags */ 3127 if (IS_MF_SD(bp)) 3128 __set_bit(BNX2X_Q_FLG_OV, &flags); 3129 3130 if (IS_FCOE_FP(fp)) { 3131 __set_bit(BNX2X_Q_FLG_FCOE, &flags); 3132 /* For FCoE - force usage of default priority (for afex) */ 3133 __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags); 3134 } 3135 3136 if (fp->mode != TPA_MODE_DISABLED) { 3137 __set_bit(BNX2X_Q_FLG_TPA, &flags); 3138 __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags); 3139 if (fp->mode == TPA_MODE_GRO) 3140 __set_bit(BNX2X_Q_FLG_TPA_GRO, &flags); 3141 } 3142 3143 if (leading) { 3144 __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags); 3145 __set_bit(BNX2X_Q_FLG_MCAST, &flags); 3146 } 3147 3148 /* Always set HW VLAN stripping */ 3149 __set_bit(BNX2X_Q_FLG_VLAN, &flags); 3150 3151 /* configure silent vlan removal */ 3152 if (IS_MF_AFEX(bp)) 3153 __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, &flags); 3154 3155 return flags | bnx2x_get_common_flags(bp, fp, true); 3156} 3157 3158static void bnx2x_pf_q_prep_general(struct bnx2x *bp, 3159 struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init, 3160 u8 cos) 3161{ 3162 gen_init->stat_id = bnx2x_stats_id(fp); 3163 gen_init->spcl_id = fp->cl_id; 3164 3165 /* Always use mini-jumbo MTU for FCoE L2 ring */ 3166 if (IS_FCOE_FP(fp)) 3167 gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU; 3168 else 3169 gen_init->mtu = bp->dev->mtu; 3170 3171 gen_init->cos = cos; 3172 3173 gen_init->fp_hsi = ETH_FP_HSI_VERSION; 3174} 3175 3176static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, 3177 struct bnx2x_fastpath *fp, struct rxq_pause_params *pause, 3178 struct bnx2x_rxq_setup_params *rxq_init) 3179{ 3180 u8 max_sge = 0; 3181 u16 sge_sz = 0; 3182 u16 tpa_agg_size = 0; 3183 3184 if (fp->mode != TPA_MODE_DISABLED) { 3185 pause->sge_th_lo = SGE_TH_LO(bp); 3186 pause->sge_th_hi = SGE_TH_HI(bp); 3187 3188 /* validate SGE ring has enough to cross high threshold */ 3189 WARN_ON(bp->dropless_fc && 3190 pause->sge_th_hi + FW_PREFETCH_CNT > 3191 MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); 3192 3193 tpa_agg_size = TPA_AGG_SIZE; 3194 max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >> 3195 SGE_PAGE_SHIFT; 3196 max_sge = ((max_sge + PAGES_PER_SGE - 1) & 3197 (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; 3198 sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff); 3199 } 3200 3201 /* pause - not for e1 */ 3202 if (!CHIP_IS_E1(bp)) { 3203 pause->bd_th_lo = BD_TH_LO(bp); 3204 pause->bd_th_hi = BD_TH_HI(bp); 3205 3206 pause->rcq_th_lo = RCQ_TH_LO(bp); 3207 pause->rcq_th_hi = RCQ_TH_HI(bp); 3208 /* 3209 * validate that rings have enough entries to cross 3210 * high thresholds 3211 */ 3212 WARN_ON(bp->dropless_fc && 3213 pause->bd_th_hi + FW_PREFETCH_CNT > 3214 bp->rx_ring_size); 3215 WARN_ON(bp->dropless_fc && 3216 pause->rcq_th_hi + FW_PREFETCH_CNT > 3217 NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); 3218 3219 pause->pri_map = 1; 3220 } 3221 3222 /* rxq setup */ 3223 rxq_init->dscr_map = fp->rx_desc_mapping; 3224 rxq_init->sge_map = fp->rx_sge_mapping; 3225 rxq_init->rcq_map = fp->rx_comp_mapping; 3226 rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE; 3227 3228 /* This should be a maximum number of data bytes that may be 3229 * placed on the BD (not including paddings). 3230 */ 3231 rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START - 3232 BNX2X_FW_RX_ALIGN_END - IP_HEADER_ALIGNMENT_PADDING; 3233 3234 rxq_init->cl_qzone_id = fp->cl_qzone_id; 3235 rxq_init->tpa_agg_sz = tpa_agg_size; 3236 rxq_init->sge_buf_sz = sge_sz; 3237 rxq_init->max_sges_pkt = max_sge; 3238 rxq_init->rss_engine_id = BP_FUNC(bp); 3239 rxq_init->mcast_engine_id = BP_FUNC(bp); 3240 3241 /* Maximum number or simultaneous TPA aggregation for this Queue. 3242 * 3243 * For PF Clients it should be the maximum available number. 3244 * VF driver(s) may want to define it to a smaller value. 3245 */ 3246 rxq_init->max_tpa_queues = MAX_AGG_QS(bp); 3247 3248 rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; 3249 rxq_init->fw_sb_id = fp->fw_sb_id; 3250 3251 if (IS_FCOE_FP(fp)) 3252 rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS; 3253 else 3254 rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; 3255 /* configure silent vlan removal 3256 * if multi function mode is afex, then mask default vlan 3257 */ 3258 if (IS_MF_AFEX(bp)) { 3259 rxq_init->silent_removal_value = bp->afex_def_vlan_tag; 3260 rxq_init->silent_removal_mask = VLAN_VID_MASK; 3261 } 3262} 3263 3264static void bnx2x_pf_tx_q_prep(struct bnx2x *bp, 3265 struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init, 3266 u8 cos) 3267{ 3268 txq_init->dscr_map = fp->txdata_ptr[cos]->tx_desc_mapping; 3269 txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos; 3270 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW; 3271 txq_init->fw_sb_id = fp->fw_sb_id; 3272 3273 /* 3274 * set the tss leading client id for TX classification == 3275 * leading RSS client id 3276 */ 3277 txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id); 3278 3279 if (IS_FCOE_FP(fp)) { 3280 txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS; 3281 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE; 3282 } 3283} 3284 3285static void bnx2x_pf_init(struct bnx2x *bp) 3286{ 3287 struct bnx2x_func_init_params func_init = {0}; 3288 struct event_ring_data eq_data = { {0} }; 3289 3290 if (!CHIP_IS_E1x(bp)) { 3291 /* reset IGU PF statistics: MSIX + ATTN */ 3292 /* PF */ 3293 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + 3294 BNX2X_IGU_STAS_MSG_VF_CNT*4 + 3295 (CHIP_MODE_IS_4_PORT(bp) ? 3296 BP_FUNC(bp) : BP_VN(bp))*4, 0); 3297 /* ATTN */ 3298 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + 3299 BNX2X_IGU_STAS_MSG_VF_CNT*4 + 3300 BNX2X_IGU_STAS_MSG_PF_CNT*4 + 3301 (CHIP_MODE_IS_4_PORT(bp) ? 3302 BP_FUNC(bp) : BP_VN(bp))*4, 0); 3303 } 3304 3305 func_init.spq_active = true; 3306 func_init.pf_id = BP_FUNC(bp); 3307 func_init.func_id = BP_FUNC(bp); 3308 func_init.spq_map = bp->spq_mapping; 3309 func_init.spq_prod = bp->spq_prod_idx; 3310 3311 bnx2x_func_init(bp, &func_init); 3312 3313 memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port)); 3314 3315 /* 3316 * Congestion management values depend on the link rate 3317 * There is no active link so initial link rate is set to 10 Gbps. 3318 * When the link comes up The congestion management values are 3319 * re-calculated according to the actual link rate. 3320 */ 3321 bp->link_vars.line_speed = SPEED_10000; 3322 bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp)); 3323 3324 /* Only the PMF sets the HW */ 3325 if (bp->port.pmf) 3326 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); 3327 3328 /* init Event Queue - PCI bus guarantees correct endianity*/ 3329 eq_data.base_addr.hi = U64_HI(bp->eq_mapping); 3330 eq_data.base_addr.lo = U64_LO(bp->eq_mapping); 3331 eq_data.producer = bp->eq_prod; 3332 eq_data.index_id = HC_SP_INDEX_EQ_CONS; 3333 eq_data.sb_id = DEF_SB_ID; 3334 storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp)); 3335} 3336 3337static void bnx2x_e1h_disable(struct bnx2x *bp) 3338{ 3339 int port = BP_PORT(bp); 3340 3341 bnx2x_tx_disable(bp); 3342 3343 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); 3344} 3345 3346static void bnx2x_e1h_enable(struct bnx2x *bp) 3347{ 3348 int port = BP_PORT(bp); 3349 3350 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) 3351 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); 3352 3353 /* Tx queue should be only re-enabled */ 3354 netif_tx_wake_all_queues(bp->dev); 3355 3356 /* 3357 * Should not call netif_carrier_on since it will be called if the link 3358 * is up when checking for link state 3359 */ 3360} 3361 3362#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3 3363 3364static void bnx2x_drv_info_ether_stat(struct bnx2x *bp) 3365{ 3366 struct eth_stats_info *ether_stat = 3367 &bp->slowpath->drv_info_to_mcp.ether_stat; 3368 struct bnx2x_vlan_mac_obj *mac_obj = 3369 &bp->sp_objs->mac_obj; 3370 int i; 3371 3372 strlcpy(ether_stat->version, DRV_MODULE_VERSION, 3373 ETH_STAT_INFO_VERSION_LEN); 3374 3375 /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the 3376 * mac_local field in ether_stat struct. The base address is offset by 2 3377 * bytes to account for the field being 8 bytes but a mac address is 3378 * only 6 bytes. Likewise, the stride for the get_n_elements function is 3379 * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes 3380 * allocated by the ether_stat struct, so the macs will land in their 3381 * proper positions. 3382 */ 3383 for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++) 3384 memset(ether_stat->mac_local + i, 0, 3385 sizeof(ether_stat->mac_local[0])); 3386 mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj, 3387 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED, 3388 ether_stat->mac_local + MAC_PAD, MAC_PAD, 3389 ETH_ALEN); 3390 ether_stat->mtu_size = bp->dev->mtu; 3391 if (bp->dev->features & NETIF_F_RXCSUM) 3392 ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK; 3393 if (bp->dev->features & NETIF_F_TSO) 3394 ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK; 3395 ether_stat->feature_flags |= bp->common.boot_mode; 3396 3397 ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0; 3398 3399 ether_stat->txq_size = bp->tx_ring_size; 3400 ether_stat->rxq_size = bp->rx_ring_size; 3401 3402#ifdef CONFIG_BNX2X_SRIOV 3403 ether_stat->vf_cnt = IS_SRIOV(bp) ? bp->vfdb->sriov.nr_virtfn : 0; 3404#endif 3405} 3406 3407static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp) 3408{ 3409 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; 3410 struct fcoe_stats_info *fcoe_stat = 3411 &bp->slowpath->drv_info_to_mcp.fcoe_stat; 3412 3413 if (!CNIC_LOADED(bp)) 3414 return; 3415 3416 memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN); 3417 3418 fcoe_stat->qos_priority = 3419 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE]; 3420 3421 /* insert FCoE stats from ramrod response */ 3422 if (!NO_FCOE(bp)) { 3423 struct tstorm_per_queue_stats *fcoe_q_tstorm_stats = 3424 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. 3425 tstorm_queue_statistics; 3426 3427 struct xstorm_per_queue_stats *fcoe_q_xstorm_stats = 3428 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. 3429 xstorm_queue_statistics; 3430 3431 struct fcoe_statistics_params *fw_fcoe_stat = 3432 &bp->fw_stats_data->fcoe; 3433 3434 ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0, 3435 fcoe_stat->rx_bytes_lo, 3436 fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); 3437 3438 ADD_64_LE(fcoe_stat->rx_bytes_hi, 3439 fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, 3440 fcoe_stat->rx_bytes_lo, 3441 fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); 3442 3443 ADD_64_LE(fcoe_stat->rx_bytes_hi, 3444 fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, 3445 fcoe_stat->rx_bytes_lo, 3446 fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); 3447 3448 ADD_64_LE(fcoe_stat->rx_bytes_hi, 3449 fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, 3450 fcoe_stat->rx_bytes_lo, 3451 fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); 3452 3453 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3454 fcoe_stat->rx_frames_lo, 3455 fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); 3456 3457 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3458 fcoe_stat->rx_frames_lo, 3459 fcoe_q_tstorm_stats->rcv_ucast_pkts); 3460 3461 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3462 fcoe_stat->rx_frames_lo, 3463 fcoe_q_tstorm_stats->rcv_bcast_pkts); 3464 3465 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3466 fcoe_stat->rx_frames_lo, 3467 fcoe_q_tstorm_stats->rcv_mcast_pkts); 3468 3469 ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0, 3470 fcoe_stat->tx_bytes_lo, 3471 fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); 3472 3473 ADD_64_LE(fcoe_stat->tx_bytes_hi, 3474 fcoe_q_xstorm_stats->ucast_bytes_sent.hi, 3475 fcoe_stat->tx_bytes_lo, 3476 fcoe_q_xstorm_stats->ucast_bytes_sent.lo); 3477 3478 ADD_64_LE(fcoe_stat->tx_bytes_hi, 3479 fcoe_q_xstorm_stats->bcast_bytes_sent.hi, 3480 fcoe_stat->tx_bytes_lo, 3481 fcoe_q_xstorm_stats->bcast_bytes_sent.lo); 3482 3483 ADD_64_LE(fcoe_stat->tx_bytes_hi, 3484 fcoe_q_xstorm_stats->mcast_bytes_sent.hi, 3485 fcoe_stat->tx_bytes_lo, 3486 fcoe_q_xstorm_stats->mcast_bytes_sent.lo); 3487 3488 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3489 fcoe_stat->tx_frames_lo, 3490 fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); 3491 3492 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3493 fcoe_stat->tx_frames_lo, 3494 fcoe_q_xstorm_stats->ucast_pkts_sent); 3495 3496 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3497 fcoe_stat->tx_frames_lo, 3498 fcoe_q_xstorm_stats->bcast_pkts_sent); 3499 3500 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3501 fcoe_stat->tx_frames_lo, 3502 fcoe_q_xstorm_stats->mcast_pkts_sent); 3503 } 3504 3505 /* ask L5 driver to add data to the struct */ 3506 bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD); 3507} 3508 3509static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp) 3510{ 3511 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; 3512 struct iscsi_stats_info *iscsi_stat = 3513 &bp->slowpath->drv_info_to_mcp.iscsi_stat; 3514 3515 if (!CNIC_LOADED(bp)) 3516 return; 3517 3518 memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac, 3519 ETH_ALEN); 3520 3521 iscsi_stat->qos_priority = 3522 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI]; 3523 3524 /* ask L5 driver to add data to the struct */ 3525 bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD); 3526} 3527 3528/* called due to MCP event (on pmf): 3529 * reread new bandwidth configuration 3530 * configure FW 3531 * notify others function about the change 3532 */ 3533static void bnx2x_config_mf_bw(struct bnx2x *bp) 3534{ 3535 if (bp->link_vars.link_up) { 3536 bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX); 3537 bnx2x_link_sync_notify(bp); 3538 } 3539 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); 3540} 3541 3542static void bnx2x_set_mf_bw(struct bnx2x *bp) 3543{ 3544 bnx2x_config_mf_bw(bp); 3545 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0); 3546} 3547 3548static void bnx2x_handle_eee_event(struct bnx2x *bp) 3549{ 3550 DP(BNX2X_MSG_MCP, "EEE - LLDP event\n"); 3551 bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0); 3552} 3553 3554#define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20) 3555#define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25) 3556 3557static void bnx2x_handle_drv_info_req(struct bnx2x *bp) 3558{ 3559 enum drv_info_opcode op_code; 3560 u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control); 3561 bool release = false; 3562 int wait; 3563 3564 /* if drv_info version supported by MFW doesn't match - send NACK */ 3565 if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) { 3566 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); 3567 return; 3568 } 3569 3570 op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >> 3571 DRV_INFO_CONTROL_OP_CODE_SHIFT; 3572 3573 /* Must prevent other flows from accessing drv_info_to_mcp */ 3574 mutex_lock(&bp->drv_info_mutex); 3575 3576 memset(&bp->slowpath->drv_info_to_mcp, 0, 3577 sizeof(union drv_info_to_mcp)); 3578 3579 switch (op_code) { 3580 case ETH_STATS_OPCODE: 3581 bnx2x_drv_info_ether_stat(bp); 3582 break; 3583 case FCOE_STATS_OPCODE: 3584 bnx2x_drv_info_fcoe_stat(bp); 3585 break; 3586 case ISCSI_STATS_OPCODE: 3587 bnx2x_drv_info_iscsi_stat(bp); 3588 break; 3589 default: 3590 /* if op code isn't supported - send NACK */ 3591 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); 3592 goto out; 3593 } 3594 3595 /* if we got drv_info attn from MFW then these fields are defined in 3596 * shmem2 for sure 3597 */ 3598 SHMEM2_WR(bp, drv_info_host_addr_lo, 3599 U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp))); 3600 SHMEM2_WR(bp, drv_info_host_addr_hi, 3601 U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp))); 3602 3603 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0); 3604 3605 /* Since possible management wants both this and get_driver_version 3606 * need to wait until management notifies us it finished utilizing 3607 * the buffer. 3608 */ 3609 if (!SHMEM2_HAS(bp, mfw_drv_indication)) { 3610 DP(BNX2X_MSG_MCP, "Management does not support indication\n"); 3611 } else if (!bp->drv_info_mng_owner) { 3612 u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1)); 3613 3614 for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) { 3615 u32 indication = SHMEM2_RD(bp, mfw_drv_indication); 3616 3617 /* Management is done; need to clear indication */ 3618 if (indication & bit) { 3619 SHMEM2_WR(bp, mfw_drv_indication, 3620 indication & ~bit); 3621 release = true; 3622 break; 3623 } 3624 3625 msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH); 3626 } 3627 } 3628 if (!release) { 3629 DP(BNX2X_MSG_MCP, "Management did not release indication\n"); 3630 bp->drv_info_mng_owner = true; 3631 } 3632 3633out: 3634 mutex_unlock(&bp->drv_info_mutex); 3635} 3636 3637static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format) 3638{ 3639 u8 vals[4]; 3640 int i = 0; 3641 3642 if (bnx2x_format) { 3643 i = sscanf(version, "1.%c%hhd.%hhd.%hhd", 3644 &vals[0], &vals[1], &vals[2], &vals[3]); 3645 if (i > 0) 3646 vals[0] -= '0'; 3647 } else { 3648 i = sscanf(version, "%hhd.%hhd.%hhd.%hhd", 3649 &vals[0], &vals[1], &vals[2], &vals[3]); 3650 } 3651 3652 while (i < 4) 3653 vals[i++] = 0; 3654 3655 return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3]; 3656} 3657 3658void bnx2x_update_mng_version(struct bnx2x *bp) 3659{ 3660 u32 iscsiver = DRV_VER_NOT_LOADED; 3661 u32 fcoever = DRV_VER_NOT_LOADED; 3662 u32 ethver = DRV_VER_NOT_LOADED; 3663 int idx = BP_FW_MB_IDX(bp); 3664 u8 *version; 3665 3666 if (!SHMEM2_HAS(bp, func_os_drv_ver)) 3667 return; 3668 3669 mutex_lock(&bp->drv_info_mutex); 3670 /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */ 3671 if (bp->drv_info_mng_owner) 3672 goto out; 3673 3674 if (bp->state != BNX2X_STATE_OPEN) 3675 goto out; 3676 3677 /* Parse ethernet driver version */ 3678 ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); 3679 if (!CNIC_LOADED(bp)) 3680 goto out; 3681 3682 /* Try getting storage driver version via cnic */ 3683 memset(&bp->slowpath->drv_info_to_mcp, 0, 3684 sizeof(union drv_info_to_mcp)); 3685 bnx2x_drv_info_iscsi_stat(bp); 3686 version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version; 3687 iscsiver = bnx2x_update_mng_version_utility(version, false); 3688 3689 memset(&bp->slowpath->drv_info_to_mcp, 0, 3690 sizeof(union drv_info_to_mcp)); 3691 bnx2x_drv_info_fcoe_stat(bp); 3692 version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version; 3693 fcoever = bnx2x_update_mng_version_utility(version, false); 3694 3695out: 3696 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver); 3697 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver); 3698 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever); 3699 3700 mutex_unlock(&bp->drv_info_mutex); 3701 3702 DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n", 3703 ethver, iscsiver, fcoever); 3704} 3705 3706void bnx2x_update_mfw_dump(struct bnx2x *bp) 3707{ 3708 u32 drv_ver; 3709 u32 valid_dump; 3710 3711 if (!SHMEM2_HAS(bp, drv_info)) 3712 return; 3713 3714 /* Update Driver load time, possibly broken in y2038 */ 3715 SHMEM2_WR(bp, drv_info.epoc, (u32)ktime_get_real_seconds()); 3716 3717 drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); 3718 SHMEM2_WR(bp, drv_info.drv_ver, drv_ver); 3719 3720 SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM)); 3721 3722 /* Check & notify On-Chip dump. */ 3723 valid_dump = SHMEM2_RD(bp, drv_info.valid_dump); 3724 3725 if (valid_dump & FIRST_DUMP_VALID) 3726 DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n"); 3727 3728 if (valid_dump & SECOND_DUMP_VALID) 3729 DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n"); 3730} 3731 3732static void bnx2x_oem_event(struct bnx2x *bp, u32 event) 3733{ 3734 u32 cmd_ok, cmd_fail; 3735 3736 /* sanity */ 3737 if (event & DRV_STATUS_DCC_EVENT_MASK && 3738 event & DRV_STATUS_OEM_EVENT_MASK) { 3739 BNX2X_ERR("Received simultaneous events %08x\n", event); 3740 return; 3741 } 3742 3743 if (event & DRV_STATUS_DCC_EVENT_MASK) { 3744 cmd_fail = DRV_MSG_CODE_DCC_FAILURE; 3745 cmd_ok = DRV_MSG_CODE_DCC_OK; 3746 } else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ { 3747 cmd_fail = DRV_MSG_CODE_OEM_FAILURE; 3748 cmd_ok = DRV_MSG_CODE_OEM_OK; 3749 } 3750 3751 DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event); 3752 3753 if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF | 3754 DRV_STATUS_OEM_DISABLE_ENABLE_PF)) { 3755 /* This is the only place besides the function initialization 3756 * where the bp->flags can change so it is done without any 3757 * locks 3758 */ 3759 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { 3760 DP(BNX2X_MSG_MCP, "mf_cfg function disabled\n"); 3761 bp->flags |= MF_FUNC_DIS; 3762 3763 bnx2x_e1h_disable(bp); 3764 } else { 3765 DP(BNX2X_MSG_MCP, "mf_cfg function enabled\n"); 3766 bp->flags &= ~MF_FUNC_DIS; 3767 3768 bnx2x_e1h_enable(bp); 3769 } 3770 event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF | 3771 DRV_STATUS_OEM_DISABLE_ENABLE_PF); 3772 } 3773 3774 if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | 3775 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) { 3776 bnx2x_config_mf_bw(bp); 3777 event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | 3778 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION); 3779 } 3780 3781 /* Report results to MCP */ 3782 if (event) 3783 bnx2x_fw_command(bp, cmd_fail, 0); 3784 else 3785 bnx2x_fw_command(bp, cmd_ok, 0); 3786} 3787 3788/* must be called under the spq lock */ 3789static struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp) 3790{ 3791 struct eth_spe *next_spe = bp->spq_prod_bd; 3792 3793 if (bp->spq_prod_bd == bp->spq_last_bd) { 3794 bp->spq_prod_bd = bp->spq; 3795 bp->spq_prod_idx = 0; 3796 DP(BNX2X_MSG_SP, "end of spq\n"); 3797 } else { 3798 bp->spq_prod_bd++; 3799 bp->spq_prod_idx++; 3800 } 3801 return next_spe; 3802} 3803 3804/* must be called under the spq lock */ 3805static void bnx2x_sp_prod_update(struct bnx2x *bp) 3806{ 3807 int func = BP_FUNC(bp); 3808 3809 /* 3810 * Make sure that BD data is updated before writing the producer: 3811 * BD data is written to the memory, the producer is read from the 3812 * memory, thus we need a full memory barrier to ensure the ordering. 3813 */ 3814 mb(); 3815 3816 REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func), 3817 bp->spq_prod_idx); 3818 mmiowb(); 3819} 3820 3821/** 3822 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ 3823 * 3824 * @cmd: command to check 3825 * @cmd_type: command type 3826 */ 3827static bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type) 3828{ 3829 if ((cmd_type == NONE_CONNECTION_TYPE) || 3830 (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) || 3831 (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) || 3832 (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) || 3833 (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) || 3834 (cmd == RAMROD_CMD_ID_ETH_SET_MAC) || 3835 (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) 3836 return true; 3837 else 3838 return false; 3839} 3840 3841/** 3842 * bnx2x_sp_post - place a single command on an SP ring 3843 * 3844 * @bp: driver handle 3845 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.) 3846 * @cid: SW CID the command is related to 3847 * @data_hi: command private data address (high 32 bits) 3848 * @data_lo: command private data address (low 32 bits) 3849 * @cmd_type: command type (e.g. NONE, ETH) 3850 * 3851 * SP data is handled as if it's always an address pair, thus data fields are 3852 * not swapped to little endian in upper functions. Instead this function swaps 3853 * data as if it's two u32 fields. 3854 */ 3855int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, 3856 u32 data_hi, u32 data_lo, int cmd_type) 3857{ 3858 struct eth_spe *spe; 3859 u16 type; 3860 bool common = bnx2x_is_contextless_ramrod(command, cmd_type); 3861 3862#ifdef BNX2X_STOP_ON_ERROR 3863 if (unlikely(bp->panic)) { 3864 BNX2X_ERR("Can't post SP when there is panic\n"); 3865 return -EIO; 3866 } 3867#endif 3868 3869 spin_lock_bh(&bp->spq_lock); 3870 3871 if (common) { 3872 if (!atomic_read(&bp->eq_spq_left)) { 3873 BNX2X_ERR("BUG! EQ ring full!\n"); 3874 spin_unlock_bh(&bp->spq_lock); 3875 bnx2x_panic(); 3876 return -EBUSY; 3877 } 3878 } else if (!atomic_read(&bp->cq_spq_left)) { 3879 BNX2X_ERR("BUG! SPQ ring full!\n"); 3880 spin_unlock_bh(&bp->spq_lock); 3881 bnx2x_panic(); 3882 return -EBUSY; 3883 } 3884 3885 spe = bnx2x_sp_get_next(bp); 3886 3887 /* CID needs port number to be encoded int it */ 3888 spe->hdr.conn_and_cmd_data = 3889 cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) | 3890 HW_CID(bp, cid)); 3891 3892 /* In some cases, type may already contain the func-id 3893 * mainly in SRIOV related use cases, so we add it here only 3894 * if it's not already set. 3895 */ 3896 if (!(cmd_type & SPE_HDR_FUNCTION_ID)) { 3897 type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & 3898 SPE_HDR_CONN_TYPE; 3899 type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) & 3900 SPE_HDR_FUNCTION_ID); 3901 } else { 3902 type = cmd_type; 3903 } 3904 3905 spe->hdr.type = cpu_to_le16(type); 3906 3907 spe->data.update_data_addr.hi = cpu_to_le32(data_hi); 3908 spe->data.update_data_addr.lo = cpu_to_le32(data_lo); 3909 3910 /* 3911 * It's ok if the actual decrement is issued towards the memory 3912 * somewhere between the spin_lock and spin_unlock. Thus no 3913 * more explicit memory barrier is needed. 3914 */ 3915 if (common) 3916 atomic_dec(&bp->eq_spq_left); 3917 else 3918 atomic_dec(&bp->cq_spq_left); 3919 3920 DP(BNX2X_MSG_SP, 3921 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n", 3922 bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping), 3923 (u32)(U64_LO(bp->spq_mapping) + 3924 (void *)bp->spq_prod_bd - (void *)bp->spq), command, common, 3925 HW_CID(bp, cid), data_hi, data_lo, type, 3926 atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left)); 3927 3928 bnx2x_sp_prod_update(bp); 3929 spin_unlock_bh(&bp->spq_lock); 3930 return 0; 3931} 3932 3933/* acquire split MCP access lock register */ 3934static int bnx2x_acquire_alr(struct bnx2x *bp) 3935{ 3936 u32 j, val; 3937 int rc = 0; 3938 3939 might_sleep(); 3940 for (j = 0; j < 1000; j++) { 3941 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, MCPR_ACCESS_LOCK_LOCK); 3942 val = REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK); 3943 if (val & MCPR_ACCESS_LOCK_LOCK) 3944 break; 3945 3946 usleep_range(5000, 10000); 3947 } 3948 if (!(val & MCPR_ACCESS_LOCK_LOCK)) { 3949 BNX2X_ERR("Cannot acquire MCP access lock register\n"); 3950 rc = -EBUSY; 3951 } 3952 3953 return rc; 3954} 3955 3956/* release split MCP access lock register */ 3957static void bnx2x_release_alr(struct bnx2x *bp) 3958{ 3959 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0); 3960} 3961 3962#define BNX2X_DEF_SB_ATT_IDX 0x0001 3963#define BNX2X_DEF_SB_IDX 0x0002 3964 3965static u16 bnx2x_update_dsb_idx(struct bnx2x *bp) 3966{ 3967 struct host_sp_status_block *def_sb = bp->def_status_blk; 3968 u16 rc = 0; 3969 3970 barrier(); /* status block is written to by the chip */ 3971 if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) { 3972 bp->def_att_idx = def_sb->atten_status_block.attn_bits_index; 3973 rc |= BNX2X_DEF_SB_ATT_IDX; 3974 } 3975 3976 if (bp->def_idx != def_sb->sp_sb.running_index) { 3977 bp->def_idx = def_sb->sp_sb.running_index; 3978 rc |= BNX2X_DEF_SB_IDX; 3979 } 3980 3981 /* Do not reorder: indices reading should complete before handling */ 3982 barrier(); 3983 return rc; 3984} 3985 3986/* 3987 * slow path service functions 3988 */ 3989 3990static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) 3991{ 3992 int port = BP_PORT(bp); 3993 u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : 3994 MISC_REG_AEU_MASK_ATTN_FUNC_0; 3995 u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : 3996 NIG_REG_MASK_INTERRUPT_PORT0; 3997 u32 aeu_mask; 3998 u32 nig_mask = 0; 3999 u32 reg_addr; 4000 4001 if (bp->attn_state & asserted) 4002 BNX2X_ERR("IGU ERROR\n"); 4003 4004 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 4005 aeu_mask = REG_RD(bp, aeu_addr); 4006 4007 DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n", 4008 aeu_mask, asserted); 4009 aeu_mask &= ~(asserted & 0x3ff); 4010 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); 4011 4012 REG_WR(bp, aeu_addr, aeu_mask); 4013 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 4014 4015 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); 4016 bp->attn_state |= asserted; 4017 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); 4018 4019 if (asserted & ATTN_HARD_WIRED_MASK) { 4020 if (asserted & ATTN_NIG_FOR_FUNC) { 4021 4022 bnx2x_acquire_phy_lock(bp); 4023 4024 /* save nig interrupt mask */ 4025 nig_mask = REG_RD(bp, nig_int_mask_addr); 4026 4027 /* If nig_mask is not set, no need to call the update 4028 * function. 4029 */ 4030 if (nig_mask) { 4031 REG_WR(bp, nig_int_mask_addr, 0); 4032 4033 bnx2x_link_attn(bp); 4034 } 4035 4036 /* handle unicore attn? */ 4037 } 4038 if (asserted & ATTN_SW_TIMER_4_FUNC) 4039 DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n"); 4040 4041 if (asserted & GPIO_2_FUNC) 4042 DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n"); 4043 4044 if (asserted & GPIO_3_FUNC) 4045 DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n"); 4046 4047 if (asserted & GPIO_4_FUNC) 4048 DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n"); 4049 4050 if (port == 0) { 4051 if (asserted & ATTN_GENERAL_ATTN_1) { 4052 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n"); 4053 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0); 4054 } 4055 if (asserted & ATTN_GENERAL_ATTN_2) { 4056 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n"); 4057 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0); 4058 } 4059 if (asserted & ATTN_GENERAL_ATTN_3) { 4060 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n"); 4061 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0); 4062 } 4063 } else { 4064 if (asserted & ATTN_GENERAL_ATTN_4) { 4065 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n"); 4066 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0); 4067 } 4068 if (asserted & ATTN_GENERAL_ATTN_5) { 4069 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n"); 4070 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0); 4071 } 4072 if (asserted & ATTN_GENERAL_ATTN_6) { 4073 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n"); 4074 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0); 4075 } 4076 } 4077 4078 } /* if hardwired */ 4079 4080 if (bp->common.int_block == INT_BLOCK_HC) 4081 reg_addr = (HC_REG_COMMAND_REG + port*32 + 4082 COMMAND_REG_ATTN_BITS_SET); 4083 else 4084 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8); 4085 4086 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted, 4087 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); 4088 REG_WR(bp, reg_addr, asserted); 4089 4090 /* now set back the mask */ 4091 if (asserted & ATTN_NIG_FOR_FUNC) { 4092 /* Verify that IGU ack through BAR was written before restoring 4093 * NIG mask. This loop should exit after 2-3 iterations max. 4094 */ 4095 if (bp->common.int_block != INT_BLOCK_HC) { 4096 u32 cnt = 0, igu_acked; 4097 do { 4098 igu_acked = REG_RD(bp, 4099 IGU_REG_ATTENTION_ACK_BITS); 4100 } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) && 4101 (++cnt < MAX_IGU_ATTN_ACK_TO)); 4102 if (!igu_acked) 4103 DP(NETIF_MSG_HW, 4104 "Failed to verify IGU ack on time\n"); 4105 barrier(); 4106 } 4107 REG_WR(bp, nig_int_mask_addr, nig_mask); 4108 bnx2x_release_phy_lock(bp); 4109 } 4110} 4111 4112static void bnx2x_fan_failure(struct bnx2x *bp) 4113{ 4114 int port = BP_PORT(bp); 4115 u32 ext_phy_config; 4116 /* mark the failure */ 4117 ext_phy_config = 4118 SHMEM_RD(bp, 4119 dev_info.port_hw_config[port].external_phy_config); 4120 4121 ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; 4122 ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; 4123 SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config, 4124 ext_phy_config); 4125 4126 /* log the failure */ 4127 netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n" 4128 "Please contact OEM Support for assistance\n"); 4129 4130 /* Schedule device reset (unload) 4131 * This is due to some boards consuming sufficient power when driver is 4132 * up to overheat if fan fails. 4133 */ 4134 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0); 4135} 4136 4137static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) 4138{ 4139 int port = BP_PORT(bp); 4140 int reg_offset; 4141 u32 val; 4142 4143 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : 4144 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); 4145 4146 if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { 4147 4148 val = REG_RD(bp, reg_offset); 4149 val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; 4150 REG_WR(bp, reg_offset, val); 4151 4152 BNX2X_ERR("SPIO5 hw attention\n"); 4153 4154 /* Fan failure attention */ 4155 bnx2x_hw_reset_phy(&bp->link_params); 4156 bnx2x_fan_failure(bp); 4157 } 4158 4159 if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) { 4160 bnx2x_acquire_phy_lock(bp); 4161 bnx2x_handle_module_detect_int(&bp->link_params); 4162 bnx2x_release_phy_lock(bp); 4163 } 4164 4165 if (attn & HW_INTERRUT_ASSERT_SET_0) { 4166 4167 val = REG_RD(bp, reg_offset); 4168 val &= ~(attn & HW_INTERRUT_ASSERT_SET_0); 4169 REG_WR(bp, reg_offset, val); 4170 4171 BNX2X_ERR("FATAL HW block attention set0 0x%x\n", 4172 (u32)(attn & HW_INTERRUT_ASSERT_SET_0)); 4173 bnx2x_panic(); 4174 } 4175} 4176 4177static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) 4178{ 4179 u32 val; 4180 4181 if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) { 4182 4183 val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); 4184 BNX2X_ERR("DB hw attention 0x%x\n", val); 4185 /* DORQ discard attention */ 4186 if (val & 0x2) 4187 BNX2X_ERR("FATAL error from DORQ\n"); 4188 } 4189 4190 if (attn & HW_INTERRUT_ASSERT_SET_1) { 4191 4192 int port = BP_PORT(bp); 4193 int reg_offset; 4194 4195 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 : 4196 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1); 4197 4198 val = REG_RD(bp, reg_offset); 4199 val &= ~(attn & HW_INTERRUT_ASSERT_SET_1); 4200 REG_WR(bp, reg_offset, val); 4201 4202 BNX2X_ERR("FATAL HW block attention set1 0x%x\n", 4203 (u32)(attn & HW_INTERRUT_ASSERT_SET_1)); 4204 bnx2x_panic(); 4205 } 4206} 4207 4208static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) 4209{ 4210 u32 val; 4211 4212 if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { 4213 4214 val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); 4215 BNX2X_ERR("CFC hw attention 0x%x\n", val); 4216 /* CFC error attention */ 4217 if (val & 0x2) 4218 BNX2X_ERR("FATAL error from CFC\n"); 4219 } 4220 4221 if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { 4222 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); 4223 BNX2X_ERR("PXP hw attention-0 0x%x\n", val); 4224 /* RQ_USDMDP_FIFO_OVERFLOW */ 4225 if (val & 0x18000) 4226 BNX2X_ERR("FATAL error from PXP\n"); 4227 4228 if (!CHIP_IS_E1x(bp)) { 4229 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1); 4230 BNX2X_ERR("PXP hw attention-1 0x%x\n", val); 4231 } 4232 } 4233 4234 if (attn & HW_INTERRUT_ASSERT_SET_2) { 4235 4236 int port = BP_PORT(bp); 4237 int reg_offset; 4238 4239 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 : 4240 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2); 4241 4242 val = REG_RD(bp, reg_offset); 4243 val &= ~(attn & HW_INTERRUT_ASSERT_SET_2); 4244 REG_WR(bp, reg_offset, val); 4245 4246 BNX2X_ERR("FATAL HW block attention set2 0x%x\n", 4247 (u32)(attn & HW_INTERRUT_ASSERT_SET_2)); 4248 bnx2x_panic(); 4249 } 4250} 4251 4252static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) 4253{ 4254 u32 val; 4255 4256 if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { 4257 4258 if (attn & BNX2X_PMF_LINK_ASSERT) { 4259 int func = BP_FUNC(bp); 4260 4261 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); 4262 bnx2x_read_mf_cfg(bp); 4263 bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp, 4264 func_mf_config[BP_ABS_FUNC(bp)].config); 4265 val = SHMEM_RD(bp, 4266 func_mb[BP_FW_MB_IDX(bp)].drv_status); 4267 4268 if (val & (DRV_STATUS_DCC_EVENT_MASK | 4269 DRV_STATUS_OEM_EVENT_MASK)) 4270 bnx2x_oem_event(bp, 4271 (val & (DRV_STATUS_DCC_EVENT_MASK | 4272 DRV_STATUS_OEM_EVENT_MASK))); 4273 4274 if (val & DRV_STATUS_SET_MF_BW) 4275 bnx2x_set_mf_bw(bp); 4276 4277 if (val & DRV_STATUS_DRV_INFO_REQ) 4278 bnx2x_handle_drv_info_req(bp); 4279 4280 if (val & DRV_STATUS_VF_DISABLED) 4281 bnx2x_schedule_iov_task(bp, 4282 BNX2X_IOV_HANDLE_FLR); 4283 4284 if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF)) 4285 bnx2x_pmf_update(bp); 4286 4287 if (bp->port.pmf && 4288 (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) && 4289 bp->dcbx_enabled > 0) 4290 /* start dcbx state machine */ 4291 bnx2x_dcbx_set_params(bp, 4292 BNX2X_DCBX_STATE_NEG_RECEIVED); 4293 if (val & DRV_STATUS_AFEX_EVENT_MASK) 4294 bnx2x_handle_afex_cmd(bp, 4295 val & DRV_STATUS_AFEX_EVENT_MASK); 4296 if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS) 4297 bnx2x_handle_eee_event(bp); 4298 4299 if (val & DRV_STATUS_OEM_UPDATE_SVID) 4300 bnx2x_handle_update_svid_cmd(bp); 4301 4302 if (bp->link_vars.periodic_flags & 4303 PERIODIC_FLAGS_LINK_EVENT) { 4304 /* sync with link */ 4305 bnx2x_acquire_phy_lock(bp); 4306 bp->link_vars.periodic_flags &= 4307 ~PERIODIC_FLAGS_LINK_EVENT; 4308 bnx2x_release_phy_lock(bp); 4309 if (IS_MF(bp)) 4310 bnx2x_link_sync_notify(bp); 4311 bnx2x_link_report(bp); 4312 } 4313 /* Always call it here: bnx2x_link_report() will 4314 * prevent the link indication duplication. 4315 */ 4316 bnx2x__link_status_update(bp); 4317 } else if (attn & BNX2X_MC_ASSERT_BITS) { 4318 4319 BNX2X_ERR("MC assert!\n"); 4320 bnx2x_mc_assert(bp); 4321 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); 4322 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); 4323 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); 4324 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); 4325 bnx2x_panic(); 4326 4327 } else if (attn & BNX2X_MCP_ASSERT) { 4328 4329 BNX2X_ERR("MCP assert!\n"); 4330 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); 4331 bnx2x_fw_dump(bp); 4332 4333 } else 4334 BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); 4335 } 4336 4337 if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { 4338 BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn); 4339 if (attn & BNX2X_GRC_TIMEOUT) { 4340 val = CHIP_IS_E1(bp) ? 0 : 4341 REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN); 4342 BNX2X_ERR("GRC time-out 0x%08x\n", val); 4343 } 4344 if (attn & BNX2X_GRC_RSV) { 4345 val = CHIP_IS_E1(bp) ? 0 : 4346 REG_RD(bp, MISC_REG_GRC_RSV_ATTN); 4347 BNX2X_ERR("GRC reserved 0x%08x\n", val); 4348 } 4349 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); 4350 } 4351} 4352 4353/* 4354 * Bits map: 4355 * 0-7 - Engine0 load counter. 4356 * 8-15 - Engine1 load counter. 4357 * 16 - Engine0 RESET_IN_PROGRESS bit. 4358 * 17 - Engine1 RESET_IN_PROGRESS bit. 4359 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function 4360 * on the engine 4361 * 19 - Engine1 ONE_IS_LOADED. 4362 * 20 - Chip reset flow bit. When set none-leader must wait for both engines 4363 * leader to complete (check for both RESET_IN_PROGRESS bits and not for 4364 * just the one belonging to its engine). 4365 * 4366 */ 4367#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1 4368 4369#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff 4370#define BNX2X_PATH0_LOAD_CNT_SHIFT 0 4371#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00 4372#define BNX2X_PATH1_LOAD_CNT_SHIFT 8 4373#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000 4374#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000 4375#define BNX2X_GLOBAL_RESET_BIT 0x00040000 4376 4377/* 4378 * Set the GLOBAL_RESET bit. 4379 * 4380 * Should be run under rtnl lock 4381 */ 4382void bnx2x_set_reset_global(struct bnx2x *bp) 4383{ 4384 u32 val; 4385 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4386 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4387 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT); 4388 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4389} 4390 4391/* 4392 * Clear the GLOBAL_RESET bit. 4393 * 4394 * Should be run under rtnl lock 4395 */ 4396static void bnx2x_clear_reset_global(struct bnx2x *bp) 4397{ 4398 u32 val; 4399 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4400 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4401 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT)); 4402 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4403} 4404 4405/* 4406 * Checks the GLOBAL_RESET bit. 4407 * 4408 * should be run under rtnl lock 4409 */ 4410static bool bnx2x_reset_is_global(struct bnx2x *bp) 4411{ 4412 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4413 4414 DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val); 4415 return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false; 4416} 4417 4418/* 4419 * Clear RESET_IN_PROGRESS bit for the current engine. 4420 * 4421 * Should be run under rtnl lock 4422 */ 4423static void bnx2x_set_reset_done(struct bnx2x *bp) 4424{ 4425 u32 val; 4426 u32 bit = BP_PATH(bp) ? 4427 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; 4428 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4429 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4430 4431 /* Clear the bit */ 4432 val &= ~bit; 4433 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4434 4435 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4436} 4437 4438/* 4439 * Set RESET_IN_PROGRESS for the current engine. 4440 * 4441 * should be run under rtnl lock 4442 */ 4443void bnx2x_set_reset_in_progress(struct bnx2x *bp) 4444{ 4445 u32 val; 4446 u32 bit = BP_PATH(bp) ? 4447 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; 4448 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4449 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4450 4451 /* Set the bit */ 4452 val |= bit; 4453 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4454 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4455} 4456 4457/* 4458 * Checks the RESET_IN_PROGRESS bit for the given engine. 4459 * should be run under rtnl lock 4460 */ 4461bool bnx2x_reset_is_done(struct bnx2x *bp, int engine) 4462{ 4463 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4464 u32 bit = engine ? 4465 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; 4466 4467 /* return false if bit is set */ 4468 return (val & bit) ? false : true; 4469} 4470 4471/* 4472 * set pf load for the current pf. 4473 * 4474 * should be run under rtnl lock 4475 */ 4476void bnx2x_set_pf_load(struct bnx2x *bp) 4477{ 4478 u32 val1, val; 4479 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : 4480 BNX2X_PATH0_LOAD_CNT_MASK; 4481 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : 4482 BNX2X_PATH0_LOAD_CNT_SHIFT; 4483 4484 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4485 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4486 4487 DP(NETIF_MSG_IFUP, "Old GEN_REG_VAL=0x%08x\n", val); 4488 4489 /* get the current counter value */ 4490 val1 = (val & mask) >> shift; 4491 4492 /* set bit of that PF */ 4493 val1 |= (1 << bp->pf_num); 4494 4495 /* clear the old value */ 4496 val &= ~mask; 4497 4498 /* set the new one */ 4499 val |= ((val1 << shift) & mask); 4500 4501 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4502 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4503} 4504 4505/** 4506 * bnx2x_clear_pf_load - clear pf load mark 4507 * 4508 * @bp: driver handle 4509 * 4510 * Should be run under rtnl lock. 4511 * Decrements the load counter for the current engine. Returns 4512 * whether other functions are still loaded 4513 */ 4514bool bnx2x_clear_pf_load(struct bnx2x *bp) 4515{ 4516 u32 val1, val; 4517 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : 4518 BNX2X_PATH0_LOAD_CNT_MASK; 4519 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : 4520 BNX2X_PATH0_LOAD_CNT_SHIFT; 4521 4522 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4523 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4524 DP(NETIF_MSG_IFDOWN, "Old GEN_REG_VAL=0x%08x\n", val); 4525 4526 /* get the current counter value */ 4527 val1 = (val & mask) >> shift; 4528 4529 /* clear bit of that PF */ 4530 val1 &= ~(1 << bp->pf_num); 4531 4532 /* clear the old value */ 4533 val &= ~mask; 4534 4535 /* set the new one */ 4536 val |= ((val1 << shift) & mask); 4537 4538 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4539 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4540 return val1 != 0; 4541} 4542 4543/* 4544 * Read the load status for the current engine. 4545 * 4546 * should be run under rtnl lock 4547 */ 4548static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) 4549{ 4550 u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK : 4551 BNX2X_PATH0_LOAD_CNT_MASK); 4552 u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT : 4553 BNX2X_PATH0_LOAD_CNT_SHIFT); 4554 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4555 4556 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "GLOB_REG=0x%08x\n", val); 4557 4558 val = (val & mask) >> shift; 4559 4560 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "load mask for engine %d = 0x%x\n", 4561 engine, val); 4562 4563 return val != 0; 4564} 4565 4566static void _print_parity(struct bnx2x *bp, u32 reg) 4567{ 4568 pr_cont(" [0x%08x] ", REG_RD(bp, reg)); 4569} 4570 4571static void _print_next_block(int idx, const char *blk) 4572{ 4573 pr_cont("%s%s", idx ? ", " : "", blk); 4574} 4575 4576static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, 4577 int *par_num, bool print) 4578{ 4579 u32 cur_bit; 4580 bool res; 4581 int i; 4582 4583 res = false; 4584 4585 for (i = 0; sig; i++) { 4586 cur_bit = (0x1UL << i); 4587 if (sig & cur_bit) { 4588 res |= true; /* Each bit is real error! */ 4589 4590 if (print) { 4591 switch (cur_bit) { 4592 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: 4593 _print_next_block((*par_num)++, "BRB"); 4594 _print_parity(bp, 4595 BRB1_REG_BRB1_PRTY_STS); 4596 break; 4597 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: 4598 _print_next_block((*par_num)++, 4599 "PARSER"); 4600 _print_parity(bp, PRS_REG_PRS_PRTY_STS); 4601 break; 4602 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: 4603 _print_next_block((*par_num)++, "TSDM"); 4604 _print_parity(bp, 4605 TSDM_REG_TSDM_PRTY_STS); 4606 break; 4607 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: 4608 _print_next_block((*par_num)++, 4609 "SEARCHER"); 4610 _print_parity(bp, SRC_REG_SRC_PRTY_STS); 4611 break; 4612 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: 4613 _print_next_block((*par_num)++, "TCM"); 4614 _print_parity(bp, TCM_REG_TCM_PRTY_STS); 4615 break; 4616 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: 4617 _print_next_block((*par_num)++, 4618 "TSEMI"); 4619 _print_parity(bp, 4620 TSEM_REG_TSEM_PRTY_STS_0); 4621 _print_parity(bp, 4622 TSEM_REG_TSEM_PRTY_STS_1); 4623 break; 4624 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: 4625 _print_next_block((*par_num)++, "XPB"); 4626 _print_parity(bp, GRCBASE_XPB + 4627 PB_REG_PB_PRTY_STS); 4628 break; 4629 } 4630 } 4631 4632 /* Clear the bit */ 4633 sig &= ~cur_bit; 4634 } 4635 } 4636 4637 return res; 4638} 4639 4640static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, 4641 int *par_num, bool *global, 4642 bool print) 4643{ 4644 u32 cur_bit; 4645 bool res; 4646 int i; 4647 4648 res = false; 4649 4650 for (i = 0; sig; i++) { 4651 cur_bit = (0x1UL << i); 4652 if (sig & cur_bit) { 4653 res |= true; /* Each bit is real error! */ 4654 switch (cur_bit) { 4655 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: 4656 if (print) { 4657 _print_next_block((*par_num)++, "PBF"); 4658 _print_parity(bp, PBF_REG_PBF_PRTY_STS); 4659 } 4660 break; 4661 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: 4662 if (print) { 4663 _print_next_block((*par_num)++, "QM"); 4664 _print_parity(bp, QM_REG_QM_PRTY_STS); 4665 } 4666 break; 4667 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: 4668 if (print) { 4669 _print_next_block((*par_num)++, "TM"); 4670 _print_parity(bp, TM_REG_TM_PRTY_STS); 4671 } 4672 break; 4673 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: 4674 if (print) { 4675 _print_next_block((*par_num)++, "XSDM"); 4676 _print_parity(bp, 4677 XSDM_REG_XSDM_PRTY_STS); 4678 } 4679 break; 4680 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: 4681 if (print) { 4682 _print_next_block((*par_num)++, "XCM"); 4683 _print_parity(bp, XCM_REG_XCM_PRTY_STS); 4684 } 4685 break; 4686 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: 4687 if (print) { 4688 _print_next_block((*par_num)++, 4689 "XSEMI"); 4690 _print_parity(bp, 4691 XSEM_REG_XSEM_PRTY_STS_0); 4692 _print_parity(bp, 4693 XSEM_REG_XSEM_PRTY_STS_1); 4694 } 4695 break; 4696 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: 4697 if (print) { 4698 _print_next_block((*par_num)++, 4699 "DOORBELLQ"); 4700 _print_parity(bp, 4701 DORQ_REG_DORQ_PRTY_STS); 4702 } 4703 break; 4704 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: 4705 if (print) { 4706 _print_next_block((*par_num)++, "NIG"); 4707 if (CHIP_IS_E1x(bp)) { 4708 _print_parity(bp, 4709 NIG_REG_NIG_PRTY_STS); 4710 } else { 4711 _print_parity(bp, 4712 NIG_REG_NIG_PRTY_STS_0); 4713 _print_parity(bp, 4714 NIG_REG_NIG_PRTY_STS_1); 4715 } 4716 } 4717 break; 4718 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: 4719 if (print) 4720 _print_next_block((*par_num)++, 4721 "VAUX PCI CORE"); 4722 *global = true; 4723 break; 4724 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: 4725 if (print) { 4726 _print_next_block((*par_num)++, 4727 "DEBUG"); 4728 _print_parity(bp, DBG_REG_DBG_PRTY_STS); 4729 } 4730 break; 4731 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: 4732 if (print) { 4733 _print_next_block((*par_num)++, "USDM"); 4734 _print_parity(bp, 4735 USDM_REG_USDM_PRTY_STS); 4736 } 4737 break; 4738 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: 4739 if (print) { 4740 _print_next_block((*par_num)++, "UCM"); 4741 _print_parity(bp, UCM_REG_UCM_PRTY_STS); 4742 } 4743 break; 4744 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: 4745 if (print) { 4746 _print_next_block((*par_num)++, 4747 "USEMI"); 4748 _print_parity(bp, 4749 USEM_REG_USEM_PRTY_STS_0); 4750 _print_parity(bp, 4751 USEM_REG_USEM_PRTY_STS_1); 4752 } 4753 break; 4754 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: 4755 if (print) { 4756 _print_next_block((*par_num)++, "UPB"); 4757 _print_parity(bp, GRCBASE_UPB + 4758 PB_REG_PB_PRTY_STS); 4759 } 4760 break; 4761 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: 4762 if (print) { 4763 _print_next_block((*par_num)++, "CSDM"); 4764 _print_parity(bp, 4765 CSDM_REG_CSDM_PRTY_STS); 4766 } 4767 break; 4768 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: 4769 if (print) { 4770 _print_next_block((*par_num)++, "CCM"); 4771 _print_parity(bp, CCM_REG_CCM_PRTY_STS); 4772 } 4773 break; 4774 } 4775 4776 /* Clear the bit */ 4777 sig &= ~cur_bit; 4778 } 4779 } 4780 4781 return res; 4782} 4783 4784static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, 4785 int *par_num, bool print) 4786{ 4787 u32 cur_bit; 4788 bool res; 4789 int i; 4790 4791 res = false; 4792 4793 for (i = 0; sig; i++) { 4794 cur_bit = (0x1UL << i); 4795 if (sig & cur_bit) { 4796 res = true; /* Each bit is real error! */ 4797 if (print) { 4798 switch (cur_bit) { 4799 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: 4800 _print_next_block((*par_num)++, 4801 "CSEMI"); 4802 _print_parity(bp, 4803 CSEM_REG_CSEM_PRTY_STS_0); 4804 _print_parity(bp, 4805 CSEM_REG_CSEM_PRTY_STS_1); 4806 break; 4807 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: 4808 _print_next_block((*par_num)++, "PXP"); 4809 _print_parity(bp, PXP_REG_PXP_PRTY_STS); 4810 _print_parity(bp, 4811 PXP2_REG_PXP2_PRTY_STS_0); 4812 _print_parity(bp, 4813 PXP2_REG_PXP2_PRTY_STS_1); 4814 break; 4815 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: 4816 _print_next_block((*par_num)++, 4817 "PXPPCICLOCKCLIENT"); 4818 break; 4819 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: 4820 _print_next_block((*par_num)++, "CFC"); 4821 _print_parity(bp, 4822 CFC_REG_CFC_PRTY_STS); 4823 break; 4824 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: 4825 _print_next_block((*par_num)++, "CDU"); 4826 _print_parity(bp, CDU_REG_CDU_PRTY_STS); 4827 break; 4828 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: 4829 _print_next_block((*par_num)++, "DMAE"); 4830 _print_parity(bp, 4831 DMAE_REG_DMAE_PRTY_STS); 4832 break; 4833 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: 4834 _print_next_block((*par_num)++, "IGU"); 4835 if (CHIP_IS_E1x(bp)) 4836 _print_parity(bp, 4837 HC_REG_HC_PRTY_STS); 4838 else 4839 _print_parity(bp, 4840 IGU_REG_IGU_PRTY_STS); 4841 break; 4842 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: 4843 _print_next_block((*par_num)++, "MISC"); 4844 _print_parity(bp, 4845 MISC_REG_MISC_PRTY_STS); 4846 break; 4847 } 4848 } 4849 4850 /* Clear the bit */ 4851 sig &= ~cur_bit; 4852 } 4853 } 4854 4855 return res; 4856} 4857 4858static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig, 4859 int *par_num, bool *global, 4860 bool print) 4861{ 4862 bool res = false; 4863 u32 cur_bit; 4864 int i; 4865 4866 for (i = 0; sig; i++) { 4867 cur_bit = (0x1UL << i); 4868 if (sig & cur_bit) { 4869 switch (cur_bit) { 4870 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: 4871 if (print) 4872 _print_next_block((*par_num)++, 4873 "MCP ROM"); 4874 *global = true; 4875 res = true; 4876 break; 4877 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: 4878 if (print) 4879 _print_next_block((*par_num)++, 4880 "MCP UMP RX"); 4881 *global = true; 4882 res = true; 4883 break; 4884 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: 4885 if (print) 4886 _print_next_block((*par_num)++, 4887 "MCP UMP TX"); 4888 *global = true; 4889 res = true; 4890 break; 4891 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: 4892 (*par_num)++; 4893 /* clear latched SCPAD PATIRY from MCP */ 4894 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 4895 1UL << 10); 4896 break; 4897 } 4898 4899 /* Clear the bit */ 4900 sig &= ~cur_bit; 4901 } 4902 } 4903 4904 return res; 4905} 4906 4907static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, 4908 int *par_num, bool print) 4909{ 4910 u32 cur_bit; 4911 bool res; 4912 int i; 4913 4914 res = false; 4915 4916 for (i = 0; sig; i++) { 4917 cur_bit = (0x1UL << i); 4918 if (sig & cur_bit) { 4919 res = true; /* Each bit is real error! */ 4920 if (print) { 4921 switch (cur_bit) { 4922 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: 4923 _print_next_block((*par_num)++, 4924 "PGLUE_B"); 4925 _print_parity(bp, 4926 PGLUE_B_REG_PGLUE_B_PRTY_STS); 4927 break; 4928 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: 4929 _print_next_block((*par_num)++, "ATC"); 4930 _print_parity(bp, 4931 ATC_REG_ATC_PRTY_STS); 4932 break; 4933 } 4934 } 4935 /* Clear the bit */ 4936 sig &= ~cur_bit; 4937 } 4938 } 4939 4940 return res; 4941} 4942 4943static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, 4944 u32 *sig) 4945{ 4946 bool res = false; 4947 4948 if ((sig[0] & HW_PRTY_ASSERT_SET_0) || 4949 (sig[1] & HW_PRTY_ASSERT_SET_1) || 4950 (sig[2] & HW_PRTY_ASSERT_SET_2) || 4951 (sig[3] & HW_PRTY_ASSERT_SET_3) || 4952 (sig[4] & HW_PRTY_ASSERT_SET_4)) { 4953 int par_num = 0; 4954 4955 DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n" 4956 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n", 4957 sig[0] & HW_PRTY_ASSERT_SET_0, 4958 sig[1] & HW_PRTY_ASSERT_SET_1, 4959 sig[2] & HW_PRTY_ASSERT_SET_2, 4960 sig[3] & HW_PRTY_ASSERT_SET_3, 4961 sig[4] & HW_PRTY_ASSERT_SET_4); 4962 if (print) { 4963 if (((sig[0] & HW_PRTY_ASSERT_SET_0) || 4964 (sig[1] & HW_PRTY_ASSERT_SET_1) || 4965 (sig[2] & HW_PRTY_ASSERT_SET_2) || 4966 (sig[4] & HW_PRTY_ASSERT_SET_4)) || 4967 (sig[3] & HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD)) { 4968 netdev_err(bp->dev, 4969 "Parity errors detected in blocks: "); 4970 } else { 4971 print = false; 4972 } 4973 } 4974 res |= bnx2x_check_blocks_with_parity0(bp, 4975 sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print); 4976 res |= bnx2x_check_blocks_with_parity1(bp, 4977 sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print); 4978 res |= bnx2x_check_blocks_with_parity2(bp, 4979 sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print); 4980 res |= bnx2x_check_blocks_with_parity3(bp, 4981 sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print); 4982 res |= bnx2x_check_blocks_with_parity4(bp, 4983 sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print); 4984 4985 if (print) 4986 pr_cont("\n"); 4987 } 4988 4989 return res; 4990} 4991 4992/** 4993 * bnx2x_chk_parity_attn - checks for parity attentions. 4994 * 4995 * @bp: driver handle 4996 * @global: true if there was a global attention 4997 * @print: show parity attention in syslog 4998 */ 4999bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) 5000{ 5001 struct attn_route attn = { {0} }; 5002 int port = BP_PORT(bp); 5003 5004 attn.sig[0] = REG_RD(bp, 5005 MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + 5006 port*4); 5007 attn.sig[1] = REG_RD(bp, 5008 MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + 5009 port*4); 5010 attn.sig[2] = REG_RD(bp, 5011 MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + 5012 port*4); 5013 attn.sig[3] = REG_RD(bp, 5014 MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + 5015 port*4); 5016 /* Since MCP attentions can't be disabled inside the block, we need to 5017 * read AEU registers to see whether they're currently disabled 5018 */ 5019 attn.sig[3] &= ((REG_RD(bp, 5020 !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 5021 : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & 5022 MISC_AEU_ENABLE_MCP_PRTY_BITS) | 5023 ~MISC_AEU_ENABLE_MCP_PRTY_BITS); 5024 5025 if (!CHIP_IS_E1x(bp)) 5026 attn.sig[4] = REG_RD(bp, 5027 MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + 5028 port*4); 5029 5030 return bnx2x_parity_attn(bp, global, print, attn.sig); 5031} 5032 5033static void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn) 5034{ 5035 u32 val; 5036 if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) { 5037 5038 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR); 5039 BNX2X_ERR("PGLUE hw attention 0x%x\n", val); 5040 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR) 5041 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n"); 5042 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR) 5043 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n"); 5044 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) 5045 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n"); 5046 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN) 5047 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n"); 5048 if (val & 5049 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN) 5050 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n"); 5051 if (val & 5052 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN) 5053 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n"); 5054 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN) 5055 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n"); 5056 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN) 5057 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n"); 5058 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW) 5059 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n"); 5060 } 5061 if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) { 5062 val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR); 5063 BNX2X_ERR("ATC hw attention 0x%x\n", val); 5064 if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR) 5065 BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n"); 5066 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND) 5067 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n"); 5068 if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS) 5069 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n"); 5070 if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT) 5071 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n"); 5072 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR) 5073 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n"); 5074 if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU) 5075 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n"); 5076 } 5077 5078 if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | 5079 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) { 5080 BNX2X_ERR("FATAL parity attention set4 0x%x\n", 5081 (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | 5082 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR))); 5083 } 5084} 5085 5086static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) 5087{ 5088 struct attn_route attn, *group_mask; 5089 int port = BP_PORT(bp); 5090 int index; 5091 u32 reg_addr; 5092 u32 val; 5093 u32 aeu_mask; 5094 bool global = false; 5095 5096 /* need to take HW lock because MCP or other port might also 5097 try to handle this event */ 5098 bnx2x_acquire_alr(bp); 5099 5100 if (bnx2x_chk_parity_attn(bp, &global, true)) { 5101#ifndef BNX2X_STOP_ON_ERROR 5102 bp->recovery_state = BNX2X_RECOVERY_INIT; 5103 schedule_delayed_work(&bp->sp_rtnl_task, 0); 5104 /* Disable HW interrupts */ 5105 bnx2x_int_disable(bp); 5106 /* In case of parity errors don't handle attentions so that 5107 * other function would "see" parity errors. 5108 */ 5109#else 5110 bnx2x_panic(); 5111#endif 5112 bnx2x_release_alr(bp); 5113 return; 5114 } 5115 5116 attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4); 5117 attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4); 5118 attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4); 5119 attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); 5120 if (!CHIP_IS_E1x(bp)) 5121 attn.sig[4] = 5122 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4); 5123 else 5124 attn.sig[4] = 0; 5125 5126 DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n", 5127 attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]); 5128 5129 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { 5130 if (deasserted & (1 << index)) { 5131 group_mask = &bp->attn_group[index]; 5132 5133 DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x %08x\n", 5134 index, 5135 group_mask->sig[0], group_mask->sig[1], 5136 group_mask->sig[2], group_mask->sig[3], 5137 group_mask->sig[4]); 5138 5139 bnx2x_attn_int_deasserted4(bp, 5140 attn.sig[4] & group_mask->sig[4]); 5141 bnx2x_attn_int_deasserted3(bp, 5142 attn.sig[3] & group_mask->sig[3]); 5143 bnx2x_attn_int_deasserted1(bp, 5144 attn.sig[1] & group_mask->sig[1]); 5145 bnx2x_attn_int_deasserted2(bp, 5146 attn.sig[2] & group_mask->sig[2]); 5147 bnx2x_attn_int_deasserted0(bp, 5148 attn.sig[0] & group_mask->sig[0]); 5149 } 5150 } 5151 5152 bnx2x_release_alr(bp); 5153 5154 if (bp->common.int_block == INT_BLOCK_HC) 5155 reg_addr = (HC_REG_COMMAND_REG + port*32 + 5156 COMMAND_REG_ATTN_BITS_CLR); 5157 else 5158 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8); 5159 5160 val = ~deasserted; 5161 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val, 5162 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); 5163 REG_WR(bp, reg_addr, val); 5164 5165 if (~bp->attn_state & deasserted) 5166 BNX2X_ERR("IGU ERROR\n"); 5167 5168 reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : 5169 MISC_REG_AEU_MASK_ATTN_FUNC_0; 5170 5171 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 5172 aeu_mask = REG_RD(bp, reg_addr); 5173 5174 DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n", 5175 aeu_mask, deasserted); 5176 aeu_mask |= (deasserted & 0x3ff); 5177 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); 5178 5179 REG_WR(bp, reg_addr, aeu_mask); 5180 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 5181 5182 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); 5183 bp->attn_state &= ~deasserted; 5184 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); 5185} 5186 5187static void bnx2x_attn_int(struct bnx2x *bp) 5188{ 5189 /* read local copy of bits */ 5190 u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block. 5191 attn_bits); 5192 u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block. 5193 attn_bits_ack); 5194 u32 attn_state = bp->attn_state; 5195 5196 /* look for changed bits */ 5197 u32 asserted = attn_bits & ~attn_ack & ~attn_state; 5198 u32 deasserted = ~attn_bits & attn_ack & attn_state; 5199 5200 DP(NETIF_MSG_HW, 5201 "attn_bits %x attn_ack %x asserted %x deasserted %x\n", 5202 attn_bits, attn_ack, asserted, deasserted); 5203 5204 if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) 5205 BNX2X_ERR("BAD attention state\n"); 5206 5207 /* handle bits that were raised */ 5208 if (asserted) 5209 bnx2x_attn_int_asserted(bp, asserted); 5210 5211 if (deasserted) 5212 bnx2x_attn_int_deasserted(bp, deasserted); 5213} 5214 5215void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, 5216 u16 index, u8 op, u8 update) 5217{ 5218 u32 igu_addr = bp->igu_base_addr; 5219 igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; 5220 bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, 5221 igu_addr); 5222} 5223 5224static void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod) 5225{ 5226 /* No memory barriers */ 5227 storm_memset_eq_prod(bp, prod, BP_FUNC(bp)); 5228 mmiowb(); /* keep prod updates ordered */ 5229} 5230 5231static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid, 5232 union event_ring_elem *elem) 5233{ 5234 u8 err = elem->message.error; 5235 5236 if (!bp->cnic_eth_dev.starting_cid || 5237 (cid < bp->cnic_eth_dev.starting_cid && 5238 cid != bp->cnic_eth_dev.iscsi_l2_cid)) 5239 return 1; 5240 5241 DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid); 5242 5243 if (unlikely(err)) { 5244 5245 BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n", 5246 cid); 5247 bnx2x_panic_dump(bp, false); 5248 } 5249 bnx2x_cnic_cfc_comp(bp, cid, err); 5250 return 0; 5251} 5252 5253static void bnx2x_handle_mcast_eqe(struct bnx2x *bp) 5254{ 5255 struct bnx2x_mcast_ramrod_params rparam; 5256 int rc; 5257 5258 memset(&rparam, 0, sizeof(rparam)); 5259 5260 rparam.mcast_obj = &bp->mcast_obj; 5261 5262 netif_addr_lock_bh(bp->dev); 5263 5264 /* Clear pending state for the last command */ 5265 bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw); 5266 5267 /* If there are pending mcast commands - send them */ 5268 if (bp->mcast_obj.check_pending(&bp->mcast_obj)) { 5269 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); 5270 if (rc < 0) 5271 BNX2X_ERR("Failed to send pending mcast commands: %d\n", 5272 rc); 5273 } 5274 5275 netif_addr_unlock_bh(bp->dev); 5276} 5277 5278static void bnx2x_handle_classification_eqe(struct bnx2x *bp, 5279 union event_ring_elem *elem) 5280{ 5281 unsigned long ramrod_flags = 0; 5282 int rc = 0; 5283 u32 cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK; 5284 struct bnx2x_vlan_mac_obj *vlan_mac_obj; 5285 5286 /* Always push next commands out, don't wait here */ 5287 __set_bit(RAMROD_CONT, &ramrod_flags); 5288 5289 switch (le32_to_cpu((__force __le32)elem->message.data.eth_event.echo) 5290 >> BNX2X_SWCID_SHIFT) { 5291 case BNX2X_FILTER_MAC_PENDING: 5292 DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n"); 5293 if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp))) 5294 vlan_mac_obj = &bp->iscsi_l2_mac_obj; 5295 else 5296 vlan_mac_obj = &bp->sp_objs[cid].mac_obj; 5297 5298 break; 5299 case BNX2X_FILTER_VLAN_PENDING: 5300 DP(BNX2X_MSG_SP, "Got SETUP_VLAN completions\n"); 5301 vlan_mac_obj = &bp->sp_objs[cid].vlan_obj; 5302 break; 5303 case BNX2X_FILTER_MCAST_PENDING: 5304 DP(BNX2X_MSG_SP, "Got SETUP_MCAST completions\n"); 5305 /* This is only relevant for 57710 where multicast MACs are 5306 * configured as unicast MACs using the same ramrod. 5307 */ 5308 bnx2x_handle_mcast_eqe(bp); 5309 return; 5310 default: 5311 BNX2X_ERR("Unsupported classification command: %d\n", 5312 elem->message.data.eth_event.echo); 5313 return; 5314 } 5315 5316 rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags); 5317 5318 if (rc < 0) 5319 BNX2X_ERR("Failed to schedule new commands: %d\n", rc); 5320 else if (rc > 0) 5321 DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n"); 5322} 5323 5324static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start); 5325 5326static void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp) 5327{ 5328 netif_addr_lock_bh(bp->dev); 5329 5330 clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); 5331 5332 /* Send rx_mode command again if was requested */ 5333 if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state)) 5334 bnx2x_set_storm_rx_mode(bp); 5335 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, 5336 &bp->sp_state)) 5337 bnx2x_set_iscsi_eth_rx_mode(bp, true); 5338 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, 5339 &bp->sp_state)) 5340 bnx2x_set_iscsi_eth_rx_mode(bp, false); 5341 5342 netif_addr_unlock_bh(bp->dev); 5343} 5344 5345static void bnx2x_after_afex_vif_lists(struct bnx2x *bp, 5346 union event_ring_elem *elem) 5347{ 5348 if (elem->message.data.vif_list_event.echo == VIF_LIST_RULE_GET) { 5349 DP(BNX2X_MSG_SP, 5350 "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n", 5351 elem->message.data.vif_list_event.func_bit_map); 5352 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTGET_ACK, 5353 elem->message.data.vif_list_event.func_bit_map); 5354 } else if (elem->message.data.vif_list_event.echo == 5355 VIF_LIST_RULE_SET) { 5356 DP(BNX2X_MSG_SP, "afex: ramrod completed VIF LIST_SET\n"); 5357 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTSET_ACK, 0); 5358 } 5359} 5360 5361/* called with rtnl_lock */ 5362static void bnx2x_after_function_update(struct bnx2x *bp) 5363{ 5364 int q, rc; 5365 struct bnx2x_fastpath *fp; 5366 struct bnx2x_queue_state_params queue_params = {NULL}; 5367 struct bnx2x_queue_update_params *q_update_params = 5368 &queue_params.params.update; 5369 5370 /* Send Q update command with afex vlan removal values for all Qs */ 5371 queue_params.cmd = BNX2X_Q_CMD_UPDATE; 5372 5373 /* set silent vlan removal values according to vlan mode */ 5374 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, 5375 &q_update_params->update_flags); 5376 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, 5377 &q_update_params->update_flags); 5378 __set_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); 5379 5380 /* in access mode mark mask and value are 0 to strip all vlans */ 5381 if (bp->afex_vlan_mode == FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE) { 5382 q_update_params->silent_removal_value = 0; 5383 q_update_params->silent_removal_mask = 0; 5384 } else { 5385 q_update_params->silent_removal_value = 5386 (bp->afex_def_vlan_tag & VLAN_VID_MASK); 5387 q_update_params->silent_removal_mask = VLAN_VID_MASK; 5388 } 5389 5390 for_each_eth_queue(bp, q) { 5391 /* Set the appropriate Queue object */ 5392 fp = &bp->fp[q]; 5393 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 5394 5395 /* send the ramrod */ 5396 rc = bnx2x_queue_state_change(bp, &queue_params); 5397 if (rc < 0) 5398 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", 5399 q); 5400 } 5401 5402 if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) { 5403 fp = &bp->fp[FCOE_IDX(bp)]; 5404 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 5405 5406 /* clear pending completion bit */ 5407 __clear_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); 5408 5409 /* mark latest Q bit */ 5410 smp_mb__before_atomic(); 5411 set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); 5412 smp_mb__after_atomic(); 5413 5414 /* send Q update ramrod for FCoE Q */ 5415 rc = bnx2x_queue_state_change(bp, &queue_params); 5416 if (rc < 0) 5417 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", 5418 q); 5419 } else { 5420 /* If no FCoE ring - ACK MCP now */ 5421 bnx2x_link_report(bp); 5422 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); 5423 } 5424} 5425 5426static struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj( 5427 struct bnx2x *bp, u32 cid) 5428{ 5429 DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid); 5430 5431 if (CNIC_LOADED(bp) && (cid == BNX2X_FCOE_ETH_CID(bp))) 5432 return &bnx2x_fcoe_sp_obj(bp, q_obj); 5433 else 5434 return &bp->sp_objs[CID_TO_FP(cid, bp)].q_obj; 5435} 5436 5437static void bnx2x_eq_int(struct bnx2x *bp) 5438{ 5439 u16 hw_cons, sw_cons, sw_prod; 5440 union event_ring_elem *elem; 5441 u8 echo; 5442 u32 cid; 5443 u8 opcode; 5444 int rc, spqe_cnt = 0; 5445 struct bnx2x_queue_sp_obj *q_obj; 5446 struct bnx2x_func_sp_obj *f_obj = &bp->func_obj; 5447 struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw; 5448 5449 hw_cons = le16_to_cpu(*bp->eq_cons_sb); 5450 5451 /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256. 5452 * when we get the next-page we need to adjust so the loop 5453 * condition below will be met. The next element is the size of a 5454 * regular element and hence incrementing by 1 5455 */ 5456 if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) 5457 hw_cons++; 5458 5459 /* This function may never run in parallel with itself for a 5460 * specific bp, thus there is no need in "paired" read memory 5461 * barrier here. 5462 */ 5463 sw_cons = bp->eq_cons; 5464 sw_prod = bp->eq_prod; 5465 5466 DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n", 5467 hw_cons, sw_cons, atomic_read(&bp->eq_spq_left)); 5468 5469 for (; sw_cons != hw_cons; 5470 sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) { 5471 5472 elem = &bp->eq_ring[EQ_DESC(sw_cons)]; 5473 5474 rc = bnx2x_iov_eq_sp_event(bp, elem); 5475 if (!rc) { 5476 DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n", 5477 rc); 5478 goto next_spqe; 5479 } 5480 5481 /* elem CID originates from FW; actually LE */ 5482 cid = SW_CID((__force __le32) 5483 elem->message.data.cfc_del_event.cid); 5484 opcode = elem->message.opcode; 5485 5486 /* handle eq element */ 5487 switch (opcode) { 5488 case EVENT_RING_OPCODE_VF_PF_CHANNEL: 5489 bnx2x_vf_mbx_schedule(bp, 5490 &elem->message.data.vf_pf_event); 5491 continue; 5492 5493 case EVENT_RING_OPCODE_STAT_QUERY: 5494 DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS), 5495 "got statistics comp event %d\n", 5496 bp->stats_comp++); 5497 /* nothing to do with stats comp */ 5498 goto next_spqe; 5499 5500 case EVENT_RING_OPCODE_CFC_DEL: 5501 /* handle according to cid range */ 5502 /* 5503 * we may want to verify here that the bp state is 5504 * HALTING 5505 */ 5506 DP(BNX2X_MSG_SP, 5507 "got delete ramrod for MULTI[%d]\n", cid); 5508 5509 if (CNIC_LOADED(bp) && 5510 !bnx2x_cnic_handle_cfc_del(bp, cid, elem)) 5511 goto next_spqe; 5512 5513 q_obj = bnx2x_cid_to_q_obj(bp, cid); 5514 5515 if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL)) 5516 break; 5517 5518 goto next_spqe; 5519 5520 case EVENT_RING_OPCODE_STOP_TRAFFIC: 5521 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n"); 5522 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED); 5523 if (f_obj->complete_cmd(bp, f_obj, 5524 BNX2X_F_CMD_TX_STOP)) 5525 break; 5526 goto next_spqe; 5527 5528 case EVENT_RING_OPCODE_START_TRAFFIC: 5529 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n"); 5530 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED); 5531 if (f_obj->complete_cmd(bp, f_obj, 5532 BNX2X_F_CMD_TX_START)) 5533 break; 5534 goto next_spqe; 5535 5536 case EVENT_RING_OPCODE_FUNCTION_UPDATE: 5537 echo = elem->message.data.function_update_event.echo; 5538 if (echo == SWITCH_UPDATE) { 5539 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, 5540 "got FUNC_SWITCH_UPDATE ramrod\n"); 5541 if (f_obj->complete_cmd( 5542 bp, f_obj, BNX2X_F_CMD_SWITCH_UPDATE)) 5543 break; 5544 5545 } else { 5546 int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE; 5547 5548 DP(BNX2X_MSG_SP | BNX2X_MSG_MCP, 5549 "AFEX: ramrod completed FUNCTION_UPDATE\n"); 5550 f_obj->complete_cmd(bp, f_obj, 5551 BNX2X_F_CMD_AFEX_UPDATE); 5552 5553 /* We will perform the Queues update from 5554 * sp_rtnl task as all Queue SP operations 5555 * should run under rtnl_lock. 5556 */ 5557 bnx2x_schedule_sp_rtnl(bp, cmd, 0); 5558 } 5559 5560 goto next_spqe; 5561 5562 case EVENT_RING_OPCODE_AFEX_VIF_LISTS: 5563 f_obj->complete_cmd(bp, f_obj, 5564 BNX2X_F_CMD_AFEX_VIFLISTS); 5565 bnx2x_after_afex_vif_lists(bp, elem); 5566 goto next_spqe; 5567 case EVENT_RING_OPCODE_FUNCTION_START: 5568 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, 5569 "got FUNC_START ramrod\n"); 5570 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START)) 5571 break; 5572 5573 goto next_spqe; 5574 5575 case EVENT_RING_OPCODE_FUNCTION_STOP: 5576 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, 5577 "got FUNC_STOP ramrod\n"); 5578 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP)) 5579 break; 5580 5581 goto next_spqe; 5582 5583 case EVENT_RING_OPCODE_SET_TIMESYNC: 5584 DP(BNX2X_MSG_SP | BNX2X_MSG_PTP, 5585 "got set_timesync ramrod completion\n"); 5586 if (f_obj->complete_cmd(bp, f_obj, 5587 BNX2X_F_CMD_SET_TIMESYNC)) 5588 break; 5589 goto next_spqe; 5590 } 5591 5592 switch (opcode | bp->state) { 5593 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | 5594 BNX2X_STATE_OPEN): 5595 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | 5596 BNX2X_STATE_OPENING_WAIT4_PORT): 5597 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | 5598 BNX2X_STATE_CLOSING_WAIT4_HALT): 5599 cid = elem->message.data.eth_event.echo & 5600 BNX2X_SWCID_MASK; 5601 DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n", 5602 cid); 5603 rss_raw->clear_pending(rss_raw); 5604 break; 5605 5606 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN): 5607 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG): 5608 case (EVENT_RING_OPCODE_SET_MAC | 5609 BNX2X_STATE_CLOSING_WAIT4_HALT): 5610 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | 5611 BNX2X_STATE_OPEN): 5612 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | 5613 BNX2X_STATE_DIAG): 5614 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | 5615 BNX2X_STATE_CLOSING_WAIT4_HALT): 5616 DP(BNX2X_MSG_SP, "got (un)set vlan/mac ramrod\n"); 5617 bnx2x_handle_classification_eqe(bp, elem); 5618 break; 5619 5620 case (EVENT_RING_OPCODE_MULTICAST_RULES | 5621 BNX2X_STATE_OPEN): 5622 case (EVENT_RING_OPCODE_MULTICAST_RULES | 5623 BNX2X_STATE_DIAG): 5624 case (EVENT_RING_OPCODE_MULTICAST_RULES | 5625 BNX2X_STATE_CLOSING_WAIT4_HALT): 5626 DP(BNX2X_MSG_SP, "got mcast ramrod\n"); 5627 bnx2x_handle_mcast_eqe(bp); 5628 break; 5629 5630 case (EVENT_RING_OPCODE_FILTERS_RULES | 5631 BNX2X_STATE_OPEN): 5632 case (EVENT_RING_OPCODE_FILTERS_RULES | 5633 BNX2X_STATE_DIAG): 5634 case (EVENT_RING_OPCODE_FILTERS_RULES | 5635 BNX2X_STATE_CLOSING_WAIT4_HALT): 5636 DP(BNX2X_MSG_SP, "got rx_mode ramrod\n"); 5637 bnx2x_handle_rx_mode_eqe(bp); 5638 break; 5639 default: 5640 /* unknown event log error and continue */ 5641 BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n", 5642 elem->message.opcode, bp->state); 5643 } 5644next_spqe: 5645 spqe_cnt++; 5646 } /* for */ 5647 5648 smp_mb__before_atomic(); 5649 atomic_add(spqe_cnt, &bp->eq_spq_left); 5650 5651 bp->eq_cons = sw_cons; 5652 bp->eq_prod = sw_prod; 5653 /* Make sure that above mem writes were issued towards the memory */ 5654 smp_wmb(); 5655 5656 /* update producer */ 5657 bnx2x_update_eq_prod(bp, bp->eq_prod); 5658} 5659 5660static void bnx2x_sp_task(struct work_struct *work) 5661{ 5662 struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work); 5663 5664 DP(BNX2X_MSG_SP, "sp task invoked\n"); 5665 5666 /* make sure the atomic interrupt_occurred has been written */ 5667 smp_rmb(); 5668 if (atomic_read(&bp->interrupt_occurred)) { 5669 5670 /* what work needs to be performed? */ 5671 u16 status = bnx2x_update_dsb_idx(bp); 5672 5673 DP(BNX2X_MSG_SP, "status %x\n", status); 5674 DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n"); 5675 atomic_set(&bp->interrupt_occurred, 0); 5676 5677 /* HW attentions */ 5678 if (status & BNX2X_DEF_SB_ATT_IDX) { 5679 bnx2x_attn_int(bp); 5680 status &= ~BNX2X_DEF_SB_ATT_IDX; 5681 } 5682 5683 /* SP events: STAT_QUERY and others */ 5684 if (status & BNX2X_DEF_SB_IDX) { 5685 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); 5686 5687 if (FCOE_INIT(bp) && 5688 (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { 5689 /* Prevent local bottom-halves from running as 5690 * we are going to change the local NAPI list. 5691 */ 5692 local_bh_disable(); 5693 napi_schedule(&bnx2x_fcoe(bp, napi)); 5694 local_bh_enable(); 5695 } 5696 5697 /* Handle EQ completions */ 5698 bnx2x_eq_int(bp); 5699 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 5700 le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); 5701 5702 status &= ~BNX2X_DEF_SB_IDX; 5703 } 5704 5705 /* if status is non zero then perhaps something went wrong */ 5706 if (unlikely(status)) 5707 DP(BNX2X_MSG_SP, 5708 "got an unknown interrupt! (status 0x%x)\n", status); 5709 5710 /* ack status block only if something was actually handled */ 5711 bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, 5712 le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); 5713 } 5714 5715 /* afex - poll to check if VIFSET_ACK should be sent to MFW */ 5716 if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, 5717 &bp->sp_state)) { 5718 bnx2x_link_report(bp); 5719 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); 5720 } 5721} 5722 5723irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) 5724{ 5725 struct net_device *dev = dev_instance; 5726 struct bnx2x *bp = netdev_priv(dev); 5727 5728 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, 5729 IGU_INT_DISABLE, 0); 5730 5731#ifdef BNX2X_STOP_ON_ERROR 5732 if (unlikely(bp->panic)) 5733 return IRQ_HANDLED; 5734#endif 5735 5736 if (CNIC_LOADED(bp)) { 5737 struct cnic_ops *c_ops; 5738 5739 rcu_read_lock(); 5740 c_ops = rcu_dereference(bp->cnic_ops); 5741 if (c_ops) 5742 c_ops->cnic_handler(bp->cnic_data, NULL); 5743 rcu_read_unlock(); 5744 } 5745 5746 /* schedule sp task to perform default status block work, ack 5747 * attentions and enable interrupts. 5748 */ 5749 bnx2x_schedule_sp_task(bp); 5750 5751 return IRQ_HANDLED; 5752} 5753 5754/* end of slow path */ 5755 5756void bnx2x_drv_pulse(struct bnx2x *bp) 5757{ 5758 SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb, 5759 bp->fw_drv_pulse_wr_seq); 5760} 5761 5762static void bnx2x_timer(unsigned long data) 5763{ 5764 struct bnx2x *bp = (struct bnx2x *) data; 5765 5766 if (!netif_running(bp->dev)) 5767 return; 5768 5769 if (IS_PF(bp) && 5770 !BP_NOMCP(bp)) { 5771 int mb_idx = BP_FW_MB_IDX(bp); 5772 u16 drv_pulse; 5773 u16 mcp_pulse; 5774 5775 ++bp->fw_drv_pulse_wr_seq; 5776 bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; 5777 drv_pulse = bp->fw_drv_pulse_wr_seq; 5778 bnx2x_drv_pulse(bp); 5779 5780 mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & 5781 MCP_PULSE_SEQ_MASK); 5782 /* The delta between driver pulse and mcp response 5783 * should not get too big. If the MFW is more than 5 pulses 5784 * behind, we should worry about it enough to generate an error 5785 * log. 5786 */ 5787 if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) 5788 BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", 5789 drv_pulse, mcp_pulse); 5790 } 5791 5792 if (bp->state == BNX2X_STATE_OPEN) 5793 bnx2x_stats_handle(bp, STATS_EVENT_UPDATE); 5794 5795 /* sample pf vf bulletin board for new posts from pf */ 5796 if (IS_VF(bp)) 5797 bnx2x_timer_sriov(bp); 5798 5799 mod_timer(&bp->timer, jiffies + bp->current_interval); 5800} 5801 5802/* end of Statistics */ 5803 5804/* nic init */ 5805 5806/* 5807 * nic init service functions 5808 */ 5809 5810static void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) 5811{ 5812 u32 i; 5813 if (!(len%4) && !(addr%4)) 5814 for (i = 0; i < len; i += 4) 5815 REG_WR(bp, addr + i, fill); 5816 else 5817 for (i = 0; i < len; i++) 5818 REG_WR8(bp, addr + i, fill); 5819} 5820 5821/* helper: writes FP SP data to FW - data_size in dwords */ 5822static void bnx2x_wr_fp_sb_data(struct bnx2x *bp, 5823 int fw_sb_id, 5824 u32 *sb_data_p, 5825 u32 data_size) 5826{ 5827 int index; 5828 for (index = 0; index < data_size; index++) 5829 REG_WR(bp, BAR_CSTRORM_INTMEM + 5830 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) + 5831 sizeof(u32)*index, 5832 *(sb_data_p + index)); 5833} 5834 5835static void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id) 5836{ 5837 u32 *sb_data_p; 5838 u32 data_size = 0; 5839 struct hc_status_block_data_e2 sb_data_e2; 5840 struct hc_status_block_data_e1x sb_data_e1x; 5841 5842 /* disable the function first */ 5843 if (!CHIP_IS_E1x(bp)) { 5844 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); 5845 sb_data_e2.common.state = SB_DISABLED; 5846 sb_data_e2.common.p_func.vf_valid = false; 5847 sb_data_p = (u32 *)&sb_data_e2; 5848 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); 5849 } else { 5850 memset(&sb_data_e1x, 0, 5851 sizeof(struct hc_status_block_data_e1x)); 5852 sb_data_e1x.common.state = SB_DISABLED; 5853 sb_data_e1x.common.p_func.vf_valid = false; 5854 sb_data_p = (u32 *)&sb_data_e1x; 5855 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); 5856 } 5857 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); 5858 5859 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5860 CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0, 5861 CSTORM_STATUS_BLOCK_SIZE); 5862 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5863 CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0, 5864 CSTORM_SYNC_BLOCK_SIZE); 5865} 5866 5867/* helper: writes SP SB data to FW */ 5868static void bnx2x_wr_sp_sb_data(struct bnx2x *bp, 5869 struct hc_sp_status_block_data *sp_sb_data) 5870{ 5871 int func = BP_FUNC(bp); 5872 int i; 5873 for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++) 5874 REG_WR(bp, BAR_CSTRORM_INTMEM + 5875 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) + 5876 i*sizeof(u32), 5877 *((u32 *)sp_sb_data + i)); 5878} 5879 5880static void bnx2x_zero_sp_sb(struct bnx2x *bp) 5881{ 5882 int func = BP_FUNC(bp); 5883 struct hc_sp_status_block_data sp_sb_data; 5884 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); 5885 5886 sp_sb_data.state = SB_DISABLED; 5887 sp_sb_data.p_func.vf_valid = false; 5888 5889 bnx2x_wr_sp_sb_data(bp, &sp_sb_data); 5890 5891 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5892 CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0, 5893 CSTORM_SP_STATUS_BLOCK_SIZE); 5894 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5895 CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0, 5896 CSTORM_SP_SYNC_BLOCK_SIZE); 5897} 5898 5899static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, 5900 int igu_sb_id, int igu_seg_id) 5901{ 5902 hc_sm->igu_sb_id = igu_sb_id; 5903 hc_sm->igu_seg_id = igu_seg_id; 5904 hc_sm->timer_value = 0xFF; 5905 hc_sm->time_to_expire = 0xFFFFFFFF; 5906} 5907 5908/* allocates state machine ids. */ 5909static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) 5910{ 5911 /* zero out state machine indices */ 5912 /* rx indices */ 5913 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; 5914 5915 /* tx indices */ 5916 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; 5917 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; 5918 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; 5919 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; 5920 5921 /* map indices */ 5922 /* rx indices */ 5923 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= 5924 SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5925 5926 /* tx indices */ 5927 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= 5928 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5929 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= 5930 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5931 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= 5932 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5933 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= 5934 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5935} 5936 5937void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, 5938 u8 vf_valid, int fw_sb_id, int igu_sb_id) 5939{ 5940 int igu_seg_id; 5941 5942 struct hc_status_block_data_e2 sb_data_e2; 5943 struct hc_status_block_data_e1x sb_data_e1x; 5944 struct hc_status_block_sm *hc_sm_p; 5945 int data_size; 5946 u32 *sb_data_p; 5947 5948 if (CHIP_INT_MODE_IS_BC(bp)) 5949 igu_seg_id = HC_SEG_ACCESS_NORM; 5950 else 5951 igu_seg_id = IGU_SEG_ACCESS_NORM; 5952 5953 bnx2x_zero_fp_sb(bp, fw_sb_id); 5954 5955 if (!CHIP_IS_E1x(bp)) { 5956 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); 5957 sb_data_e2.common.state = SB_ENABLED; 5958 sb_data_e2.common.p_func.pf_id = BP_FUNC(bp); 5959 sb_data_e2.common.p_func.vf_id = vfid; 5960 sb_data_e2.common.p_func.vf_valid = vf_valid; 5961 sb_data_e2.common.p_func.vnic_id = BP_VN(bp); 5962 sb_data_e2.common.same_igu_sb_1b = true; 5963 sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping); 5964 sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping); 5965 hc_sm_p = sb_data_e2.common.state_machine; 5966 sb_data_p = (u32 *)&sb_data_e2; 5967 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); 5968 bnx2x_map_sb_state_machines(sb_data_e2.index_data); 5969 } else { 5970 memset(&sb_data_e1x, 0, 5971 sizeof(struct hc_status_block_data_e1x)); 5972 sb_data_e1x.common.state = SB_ENABLED; 5973 sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp); 5974 sb_data_e1x.common.p_func.vf_id = 0xff; 5975 sb_data_e1x.common.p_func.vf_valid = false; 5976 sb_data_e1x.common.p_func.vnic_id = BP_VN(bp); 5977 sb_data_e1x.common.same_igu_sb_1b = true; 5978 sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping); 5979 sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping); 5980 hc_sm_p = sb_data_e1x.common.state_machine; 5981 sb_data_p = (u32 *)&sb_data_e1x; 5982 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); 5983 bnx2x_map_sb_state_machines(sb_data_e1x.index_data); 5984 } 5985 5986 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], 5987 igu_sb_id, igu_seg_id); 5988 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], 5989 igu_sb_id, igu_seg_id); 5990 5991 DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id); 5992 5993 /* write indices to HW - PCI guarantees endianity of regpairs */ 5994 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); 5995} 5996 5997static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id, 5998 u16 tx_usec, u16 rx_usec) 5999{ 6000 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS, 6001 false, rx_usec); 6002 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, 6003 HC_INDEX_ETH_TX_CQ_CONS_COS0, false, 6004 tx_usec); 6005 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, 6006 HC_INDEX_ETH_TX_CQ_CONS_COS1, false, 6007 tx_usec); 6008 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, 6009 HC_INDEX_ETH_TX_CQ_CONS_COS2, false, 6010 tx_usec); 6011} 6012 6013static void bnx2x_init_def_sb(struct bnx2x *bp) 6014{ 6015 struct host_sp_status_block *def_sb = bp->def_status_blk; 6016 dma_addr_t mapping = bp->def_status_blk_mapping; 6017 int igu_sp_sb_index; 6018 int igu_seg_id; 6019 int port = BP_PORT(bp); 6020 int func = BP_FUNC(bp); 6021 int reg_offset, reg_offset_en5; 6022 u64 section; 6023 int index; 6024 struct hc_sp_status_block_data sp_sb_data; 6025 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); 6026 6027 if (CHIP_INT_MODE_IS_BC(bp)) { 6028 igu_sp_sb_index = DEF_SB_IGU_ID; 6029 igu_seg_id = HC_SEG_ACCESS_DEF; 6030 } else { 6031 igu_sp_sb_index = bp->igu_dsb_id; 6032 igu_seg_id = IGU_SEG_ACCESS_DEF; 6033 } 6034 6035 /* ATTN */ 6036 section = ((u64)mapping) + offsetof(struct host_sp_status_block, 6037 atten_status_block); 6038 def_sb->atten_status_block.status_block_id = igu_sp_sb_index; 6039 6040 bp->attn_state = 0; 6041 6042 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : 6043 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); 6044 reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 : 6045 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0); 6046 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { 6047 int sindex; 6048 /* take care of sig[0]..sig[4] */ 6049 for (sindex = 0; sindex < 4; sindex++) 6050 bp->attn_group[index].sig[sindex] = 6051 REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index); 6052 6053 if (!CHIP_IS_E1x(bp)) 6054 /* 6055 * enable5 is separate from the rest of the registers, 6056 * and therefore the address skip is 4 6057 * and not 16 between the different groups 6058 */ 6059 bp->attn_group[index].sig[4] = REG_RD(bp, 6060 reg_offset_en5 + 0x4*index); 6061 else 6062 bp->attn_group[index].sig[4] = 0; 6063 } 6064 6065 if (bp->common.int_block == INT_BLOCK_HC) { 6066 reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L : 6067 HC_REG_ATTN_MSG0_ADDR_L); 6068 6069 REG_WR(bp, reg_offset, U64_LO(section)); 6070 REG_WR(bp, reg_offset + 4, U64_HI(section)); 6071 } else if (!CHIP_IS_E1x(bp)) { 6072 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section)); 6073 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section)); 6074 } 6075 6076 section = ((u64)mapping) + offsetof(struct host_sp_status_block, 6077 sp_sb); 6078 6079 bnx2x_zero_sp_sb(bp); 6080 6081 /* PCI guarantees endianity of regpairs */ 6082 sp_sb_data.state = SB_ENABLED; 6083 sp_sb_data.host_sb_addr.lo = U64_LO(section); 6084 sp_sb_data.host_sb_addr.hi = U64_HI(section); 6085 sp_sb_data.igu_sb_id = igu_sp_sb_index; 6086 sp_sb_data.igu_seg_id = igu_seg_id; 6087 sp_sb_data.p_func.pf_id = func; 6088 sp_sb_data.p_func.vnic_id = BP_VN(bp); 6089 sp_sb_data.p_func.vf_id = 0xff; 6090 6091 bnx2x_wr_sp_sb_data(bp, &sp_sb_data); 6092 6093 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0); 6094} 6095 6096void bnx2x_update_coalesce(struct bnx2x *bp) 6097{ 6098 int i; 6099 6100 for_each_eth_queue(bp, i) 6101 bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id, 6102 bp->tx_ticks, bp->rx_ticks); 6103} 6104 6105static void bnx2x_init_sp_ring(struct bnx2x *bp) 6106{ 6107 spin_lock_init(&bp->spq_lock); 6108 atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING); 6109 6110 bp->spq_prod_idx = 0; 6111 bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; 6112 bp->spq_prod_bd = bp->spq; 6113 bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; 6114} 6115 6116static void bnx2x_init_eq_ring(struct bnx2x *bp) 6117{ 6118 int i; 6119 for (i = 1; i <= NUM_EQ_PAGES; i++) { 6120 union event_ring_elem *elem = 6121 &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1]; 6122 6123 elem->next_page.addr.hi = 6124 cpu_to_le32(U64_HI(bp->eq_mapping + 6125 BCM_PAGE_SIZE * (i % NUM_EQ_PAGES))); 6126 elem->next_page.addr.lo = 6127 cpu_to_le32(U64_LO(bp->eq_mapping + 6128 BCM_PAGE_SIZE*(i % NUM_EQ_PAGES))); 6129 } 6130 bp->eq_cons = 0; 6131 bp->eq_prod = NUM_EQ_DESC; 6132 bp->eq_cons_sb = BNX2X_EQ_INDEX; 6133 /* we want a warning message before it gets wrought... */ 6134 atomic_set(&bp->eq_spq_left, 6135 min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1); 6136} 6137 6138/* called with netif_addr_lock_bh() */ 6139static int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, 6140 unsigned long rx_mode_flags, 6141 unsigned long rx_accept_flags, 6142 unsigned long tx_accept_flags, 6143 unsigned long ramrod_flags) 6144{ 6145 struct bnx2x_rx_mode_ramrod_params ramrod_param; 6146 int rc; 6147 6148 memset(&ramrod_param, 0, sizeof(ramrod_param)); 6149 6150 /* Prepare ramrod parameters */ 6151 ramrod_param.cid = 0; 6152 ramrod_param.cl_id = cl_id; 6153 ramrod_param.rx_mode_obj = &bp->rx_mode_obj; 6154 ramrod_param.func_id = BP_FUNC(bp); 6155 6156 ramrod_param.pstate = &bp->sp_state; 6157 ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING; 6158 6159 ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata); 6160 ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata); 6161 6162 set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); 6163 6164 ramrod_param.ramrod_flags = ramrod_flags; 6165 ramrod_param.rx_mode_flags = rx_mode_flags; 6166 6167 ramrod_param.rx_accept_flags = rx_accept_flags; 6168 ramrod_param.tx_accept_flags = tx_accept_flags; 6169 6170 rc = bnx2x_config_rx_mode(bp, &ramrod_param); 6171 if (rc < 0) { 6172 BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode); 6173 return rc; 6174 } 6175 6176 return 0; 6177} 6178 6179static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, 6180 unsigned long *rx_accept_flags, 6181 unsigned long *tx_accept_flags) 6182{ 6183 /* Clear the flags first */ 6184 *rx_accept_flags = 0; 6185 *tx_accept_flags = 0; 6186 6187 switch (rx_mode) { 6188 case BNX2X_RX_MODE_NONE: 6189 /* 6190 * 'drop all' supersedes any accept flags that may have been 6191 * passed to the function. 6192 */ 6193 break; 6194 case BNX2X_RX_MODE_NORMAL: 6195 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); 6196 __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags); 6197 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); 6198 6199 /* internal switching mode */ 6200 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); 6201 __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags); 6202 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); 6203 6204 if (bp->accept_any_vlan) { 6205 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); 6206 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); 6207 } 6208 6209 break; 6210 case BNX2X_RX_MODE_ALLMULTI: 6211 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); 6212 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); 6213 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); 6214 6215 /* internal switching mode */ 6216 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); 6217 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); 6218 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); 6219 6220 if (bp->accept_any_vlan) { 6221 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); 6222 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); 6223 } 6224 6225 break; 6226 case BNX2X_RX_MODE_PROMISC: 6227 /* According to definition of SI mode, iface in promisc mode 6228 * should receive matched and unmatched (in resolution of port) 6229 * unicast packets. 6230 */ 6231 __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags); 6232 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); 6233 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); 6234 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); 6235 6236 /* internal switching mode */ 6237 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); 6238 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); 6239 6240 if (IS_MF_SI(bp)) 6241 __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags); 6242 else 6243 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); 6244 6245 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); 6246 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); 6247 6248 break; 6249 default: 6250 BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode); 6251 return -EINVAL; 6252 } 6253 6254 return 0; 6255} 6256 6257/* called with netif_addr_lock_bh() */ 6258static int bnx2x_set_storm_rx_mode(struct bnx2x *bp) 6259{ 6260 unsigned long rx_mode_flags = 0, ramrod_flags = 0; 6261 unsigned long rx_accept_flags = 0, tx_accept_flags = 0; 6262 int rc; 6263 6264 if (!NO_FCOE(bp)) 6265 /* Configure rx_mode of FCoE Queue */ 6266 __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); 6267 6268 rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags, 6269 &tx_accept_flags); 6270 if (rc) 6271 return rc; 6272 6273 __set_bit(RAMROD_RX, &ramrod_flags); 6274 __set_bit(RAMROD_TX, &ramrod_flags); 6275 6276 return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, 6277 rx_accept_flags, tx_accept_flags, 6278 ramrod_flags); 6279} 6280 6281static void bnx2x_init_internal_common(struct bnx2x *bp) 6282{ 6283 int i; 6284 6285 /* Zero this manually as its initialization is 6286 currently missing in the initTool */ 6287 for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) 6288 REG_WR(bp, BAR_USTRORM_INTMEM + 6289 USTORM_AGG_DATA_OFFSET + i * 4, 0); 6290 if (!CHIP_IS_E1x(bp)) { 6291 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET, 6292 CHIP_INT_MODE_IS_BC(bp) ? 6293 HC_IGU_BC_MODE : HC_IGU_NBC_MODE); 6294 } 6295} 6296 6297static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code) 6298{ 6299 switch (load_code) { 6300 case FW_MSG_CODE_DRV_LOAD_COMMON: 6301 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: 6302 bnx2x_init_internal_common(bp); 6303 /* no break */ 6304 6305 case FW_MSG_CODE_DRV_LOAD_PORT: 6306 /* nothing to do */ 6307 /* no break */ 6308 6309 case FW_MSG_CODE_DRV_LOAD_FUNCTION: 6310 /* internal memory per function is 6311 initialized inside bnx2x_pf_init */ 6312 break; 6313 6314 default: 6315 BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code); 6316 break; 6317 } 6318} 6319 6320static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp) 6321{ 6322 return fp->bp->igu_base_sb + fp->index + CNIC_SUPPORT(fp->bp); 6323} 6324 6325static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp) 6326{ 6327 return fp->bp->base_fw_ndsb + fp->index + CNIC_SUPPORT(fp->bp); 6328} 6329 6330static u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp) 6331{ 6332 if (CHIP_IS_E1x(fp->bp)) 6333 return BP_L_ID(fp->bp) + fp->index; 6334 else /* We want Client ID to be the same as IGU SB ID for 57712 */ 6335 return bnx2x_fp_igu_sb_id(fp); 6336} 6337 6338static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) 6339{ 6340 struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; 6341 u8 cos; 6342 unsigned long q_type = 0; 6343 u32 cids[BNX2X_MULTI_TX_COS] = { 0 }; 6344 fp->rx_queue = fp_idx; 6345 fp->cid = fp_idx; 6346 fp->cl_id = bnx2x_fp_cl_id(fp); 6347 fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp); 6348 fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp); 6349 /* qZone id equals to FW (per path) client id */ 6350 fp->cl_qzone_id = bnx2x_fp_qzone_id(fp); 6351 6352 /* init shortcut */ 6353 fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp); 6354 6355 /* Setup SB indices */ 6356 fp->rx_cons_sb = BNX2X_RX_SB_INDEX; 6357 6358 /* Configure Queue State object */ 6359 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); 6360 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); 6361 6362 BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS); 6363 6364 /* init tx data */ 6365 for_each_cos_in_tx_queue(fp, cos) { 6366 bnx2x_init_txdata(bp, fp->txdata_ptr[cos], 6367 CID_COS_TO_TX_ONLY_CID(fp->cid, cos, bp), 6368 FP_COS_TO_TXQ(fp, cos, bp), 6369 BNX2X_TX_SB_INDEX_BASE + cos, fp); 6370 cids[cos] = fp->txdata_ptr[cos]->cid; 6371 } 6372 6373 /* nothing more for vf to do here */ 6374 if (IS_VF(bp)) 6375 return; 6376 6377 bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, 6378 fp->fw_sb_id, fp->igu_sb_id); 6379 bnx2x_update_fpsb_idx(fp); 6380 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids, 6381 fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), 6382 bnx2x_sp_mapping(bp, q_rdata), q_type); 6383 6384 /** 6385 * Configure classification DBs: Always enable Tx switching 6386 */ 6387 bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX); 6388 6389 DP(NETIF_MSG_IFUP, 6390 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", 6391 fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, 6392 fp->igu_sb_id); 6393} 6394 6395static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata) 6396{ 6397 int i; 6398 6399 for (i = 1; i <= NUM_TX_RINGS; i++) { 6400 struct eth_tx_next_bd *tx_next_bd = 6401 &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd; 6402 6403 tx_next_bd->addr_hi = 6404 cpu_to_le32(U64_HI(txdata->tx_desc_mapping + 6405 BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); 6406 tx_next_bd->addr_lo = 6407 cpu_to_le32(U64_LO(txdata->tx_desc_mapping + 6408 BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); 6409 } 6410 6411 *txdata->tx_cons_sb = cpu_to_le16(0); 6412 6413 SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1); 6414 txdata->tx_db.data.zero_fill1 = 0; 6415 txdata->tx_db.data.prod = 0; 6416 6417 txdata->tx_pkt_prod = 0; 6418 txdata->tx_pkt_cons = 0; 6419 txdata->tx_bd_prod = 0; 6420 txdata->tx_bd_cons = 0; 6421 txdata->tx_pkt = 0; 6422} 6423 6424static void bnx2x_init_tx_rings_cnic(struct bnx2x *bp) 6425{ 6426 int i; 6427 6428 for_each_tx_queue_cnic(bp, i) 6429 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[0]); 6430} 6431 6432static void bnx2x_init_tx_rings(struct bnx2x *bp) 6433{ 6434 int i; 6435 u8 cos; 6436 6437 for_each_eth_queue(bp, i) 6438 for_each_cos_in_tx_queue(&bp->fp[i], cos) 6439 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[cos]); 6440} 6441 6442static void bnx2x_init_fcoe_fp(struct bnx2x *bp) 6443{ 6444 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); 6445 unsigned long q_type = 0; 6446 6447 bnx2x_fcoe(bp, rx_queue) = BNX2X_NUM_ETH_QUEUES(bp); 6448 bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp, 6449 BNX2X_FCOE_ETH_CL_ID_IDX); 6450 bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID(bp); 6451 bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID; 6452 bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id; 6453 bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX; 6454 bnx2x_init_txdata(bp, bnx2x_fcoe(bp, txdata_ptr[0]), 6455 fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX, 6456 fp); 6457 6458 DP(NETIF_MSG_IFUP, "created fcoe tx data (fp index %d)\n", fp->index); 6459 6460 /* qZone id equals to FW (per path) client id */ 6461 bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp); 6462 /* init shortcut */ 6463 bnx2x_fcoe(bp, ustorm_rx_prods_offset) = 6464 bnx2x_rx_ustorm_prods_offset(fp); 6465 6466 /* Configure Queue State object */ 6467 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); 6468 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); 6469 6470 /* No multi-CoS for FCoE L2 client */ 6471 BUG_ON(fp->max_cos != 1); 6472 6473 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, 6474 &fp->cid, 1, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), 6475 bnx2x_sp_mapping(bp, q_rdata), q_type); 6476 6477 DP(NETIF_MSG_IFUP, 6478 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", 6479 fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, 6480 fp->igu_sb_id); 6481} 6482 6483void bnx2x_nic_init_cnic(struct bnx2x *bp) 6484{ 6485 if (!NO_FCOE(bp)) 6486 bnx2x_init_fcoe_fp(bp); 6487 6488 bnx2x_init_sb(bp, bp->cnic_sb_mapping, 6489 BNX2X_VF_ID_INVALID, false, 6490 bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp)); 6491 6492 /* ensure status block indices were read */ 6493 rmb(); 6494 bnx2x_init_rx_rings_cnic(bp); 6495 bnx2x_init_tx_rings_cnic(bp); 6496 6497 /* flush all */ 6498 mb(); 6499 mmiowb(); 6500} 6501 6502void bnx2x_pre_irq_nic_init(struct bnx2x *bp) 6503{ 6504 int i; 6505 6506 /* Setup NIC internals and enable interrupts */ 6507 for_each_eth_queue(bp, i) 6508 bnx2x_init_eth_fp(bp, i); 6509 6510 /* ensure status block indices were read */ 6511 rmb(); 6512 bnx2x_init_rx_rings(bp); 6513 bnx2x_init_tx_rings(bp); 6514 6515 if (IS_PF(bp)) { 6516 /* Initialize MOD_ABS interrupts */ 6517 bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id, 6518 bp->common.shmem_base, 6519 bp->common.shmem2_base, BP_PORT(bp)); 6520 6521 /* initialize the default status block and sp ring */ 6522 bnx2x_init_def_sb(bp); 6523 bnx2x_update_dsb_idx(bp); 6524 bnx2x_init_sp_ring(bp); 6525 } else { 6526 bnx2x_memset_stats(bp); 6527 } 6528} 6529 6530void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code) 6531{ 6532 bnx2x_init_eq_ring(bp); 6533 bnx2x_init_internal(bp, load_code); 6534 bnx2x_pf_init(bp); 6535 bnx2x_stats_init(bp); 6536 6537 /* flush all before enabling interrupts */ 6538 mb(); 6539 mmiowb(); 6540 6541 bnx2x_int_enable(bp); 6542 6543 /* Check for SPIO5 */ 6544 bnx2x_attn_int_deasserted0(bp, 6545 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) & 6546 AEU_INPUTS_ATTN_BITS_SPIO5); 6547} 6548 6549/* gzip service functions */ 6550static int bnx2x_gunzip_init(struct bnx2x *bp) 6551{ 6552 bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE, 6553 &bp->gunzip_mapping, GFP_KERNEL); 6554 if (bp->gunzip_buf == NULL) 6555 goto gunzip_nomem1; 6556 6557 bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL); 6558 if (bp->strm == NULL) 6559 goto gunzip_nomem2; 6560 6561 bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); 6562 if (bp->strm->workspace == NULL) 6563 goto gunzip_nomem3; 6564 6565 return 0; 6566 6567gunzip_nomem3: 6568 kfree(bp->strm); 6569 bp->strm = NULL; 6570 6571gunzip_nomem2: 6572 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, 6573 bp->gunzip_mapping); 6574 bp->gunzip_buf = NULL; 6575 6576gunzip_nomem1: 6577 BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n"); 6578 return -ENOMEM; 6579} 6580 6581static void bnx2x_gunzip_end(struct bnx2x *bp) 6582{ 6583 if (bp->strm) { 6584 vfree(bp->strm->workspace); 6585 kfree(bp->strm); 6586 bp->strm = NULL; 6587 } 6588 6589 if (bp->gunzip_buf) { 6590 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, 6591 bp->gunzip_mapping); 6592 bp->gunzip_buf = NULL; 6593 } 6594} 6595 6596static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) 6597{ 6598 int n, rc; 6599 6600 /* check gzip header */ 6601 if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) { 6602 BNX2X_ERR("Bad gzip header\n"); 6603 return -EINVAL; 6604 } 6605 6606 n = 10; 6607 6608#define FNAME 0x8 6609 6610 if (zbuf[3] & FNAME) 6611 while ((zbuf[n++] != 0) && (n < len)); 6612 6613 bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n; 6614 bp->strm->avail_in = len - n; 6615 bp->strm->next_out = bp->gunzip_buf; 6616 bp->strm->avail_out = FW_BUF_SIZE; 6617 6618 rc = zlib_inflateInit2(bp->strm, -MAX_WBITS); 6619 if (rc != Z_OK) 6620 return rc; 6621 6622 rc = zlib_inflate(bp->strm, Z_FINISH); 6623 if ((rc != Z_OK) && (rc != Z_STREAM_END)) 6624 netdev_err(bp->dev, "Firmware decompression error: %s\n", 6625 bp->strm->msg); 6626 6627 bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out); 6628 if (bp->gunzip_outlen & 0x3) 6629 netdev_err(bp->dev, 6630 "Firmware decompression error: gunzip_outlen (%d) not aligned\n", 6631 bp->gunzip_outlen); 6632 bp->gunzip_outlen >>= 2; 6633 6634 zlib_inflateEnd(bp->strm); 6635 6636 if (rc == Z_STREAM_END) 6637 return 0; 6638 6639 return rc; 6640} 6641 6642/* nic load/unload */ 6643 6644/* 6645 * General service functions 6646 */ 6647 6648/* send a NIG loopback debug packet */ 6649static void bnx2x_lb_pckt(struct bnx2x *bp) 6650{ 6651 u32 wb_write[3]; 6652 6653 /* Ethernet source and destination addresses */ 6654 wb_write[0] = 0x55555555; 6655 wb_write[1] = 0x55555555; 6656 wb_write[2] = 0x20; /* SOP */ 6657 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); 6658 6659 /* NON-IP protocol */ 6660 wb_write[0] = 0x09000000; 6661 wb_write[1] = 0x55555555; 6662 wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */ 6663 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); 6664} 6665 6666/* some of the internal memories 6667 * are not directly readable from the driver 6668 * to test them we send debug packets 6669 */ 6670static int bnx2x_int_mem_test(struct bnx2x *bp) 6671{ 6672 int factor; 6673 int count, i; 6674 u32 val = 0; 6675 6676 if (CHIP_REV_IS_FPGA(bp)) 6677 factor = 120; 6678 else if (CHIP_REV_IS_EMUL(bp)) 6679 factor = 200; 6680 else 6681 factor = 1; 6682 6683 /* Disable inputs of parser neighbor blocks */ 6684 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); 6685 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); 6686 REG_WR(bp, CFC_REG_DEBUG0, 0x1); 6687 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); 6688 6689 /* Write 0 to parser credits for CFC search request */ 6690 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); 6691 6692 /* send Ethernet packet */ 6693 bnx2x_lb_pckt(bp); 6694 6695 /* TODO do i reset NIG statistic? */ 6696 /* Wait until NIG register shows 1 packet of size 0x10 */ 6697 count = 1000 * factor; 6698 while (count) { 6699 6700 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); 6701 val = *bnx2x_sp(bp, wb_data[0]); 6702 if (val == 0x10) 6703 break; 6704 6705 usleep_range(10000, 20000); 6706 count--; 6707 } 6708 if (val != 0x10) { 6709 BNX2X_ERR("NIG timeout val = 0x%x\n", val); 6710 return -1; 6711 } 6712 6713 /* Wait until PRS register shows 1 packet */ 6714 count = 1000 * factor; 6715 while (count) { 6716 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); 6717 if (val == 1) 6718 break; 6719 6720 usleep_range(10000, 20000); 6721 count--; 6722 } 6723 if (val != 0x1) { 6724 BNX2X_ERR("PRS timeout val = 0x%x\n", val); 6725 return -2; 6726 } 6727 6728 /* Reset and init BRB, PRS */ 6729 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); 6730 msleep(50); 6731 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); 6732 msleep(50); 6733 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); 6734 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); 6735 6736 DP(NETIF_MSG_HW, "part2\n"); 6737 6738 /* Disable inputs of parser neighbor blocks */ 6739 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); 6740 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); 6741 REG_WR(bp, CFC_REG_DEBUG0, 0x1); 6742 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); 6743 6744 /* Write 0 to parser credits for CFC search request */ 6745 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); 6746 6747 /* send 10 Ethernet packets */ 6748 for (i = 0; i < 10; i++) 6749 bnx2x_lb_pckt(bp); 6750 6751 /* Wait until NIG register shows 10 + 1 6752 packets of size 11*0x10 = 0xb0 */ 6753 count = 1000 * factor; 6754 while (count) { 6755 6756 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); 6757 val = *bnx2x_sp(bp, wb_data[0]); 6758 if (val == 0xb0) 6759 break; 6760 6761 usleep_range(10000, 20000); 6762 count--; 6763 } 6764 if (val != 0xb0) { 6765 BNX2X_ERR("NIG timeout val = 0x%x\n", val); 6766 return -3; 6767 } 6768 6769 /* Wait until PRS register shows 2 packets */ 6770 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); 6771 if (val != 2) 6772 BNX2X_ERR("PRS timeout val = 0x%x\n", val); 6773 6774 /* Write 1 to parser credits for CFC search request */ 6775 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1); 6776 6777 /* Wait until PRS register shows 3 packets */ 6778 msleep(10 * factor); 6779 /* Wait until NIG register shows 1 packet of size 0x10 */ 6780 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); 6781 if (val != 3) 6782 BNX2X_ERR("PRS timeout val = 0x%x\n", val); 6783 6784 /* clear NIG EOP FIFO */ 6785 for (i = 0; i < 11; i++) 6786 REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO); 6787 val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY); 6788 if (val != 1) { 6789 BNX2X_ERR("clear of NIG failed\n"); 6790 return -4; 6791 } 6792 6793 /* Reset and init BRB, PRS, NIG */ 6794 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); 6795 msleep(50); 6796 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); 6797 msleep(50); 6798 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); 6799 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); 6800 if (!CNIC_SUPPORT(bp)) 6801 /* set NIC mode */ 6802 REG_WR(bp, PRS_REG_NIC_MODE, 1); 6803 6804 /* Enable inputs of parser neighbor blocks */ 6805 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff); 6806 REG_WR(bp, TCM_REG_PRS_IFEN, 0x1); 6807 REG_WR(bp, CFC_REG_DEBUG0, 0x0); 6808 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1); 6809 6810 DP(NETIF_MSG_HW, "done\n"); 6811 6812 return 0; /* OK */ 6813} 6814 6815static void bnx2x_enable_blocks_attention(struct bnx2x *bp) 6816{ 6817 u32 val; 6818 6819 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); 6820 if (!CHIP_IS_E1x(bp)) 6821 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40); 6822 else 6823 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0); 6824 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); 6825 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); 6826 /* 6827 * mask read length error interrupts in brb for parser 6828 * (parsing unit and 'checksum and crc' unit) 6829 * these errors are legal (PU reads fixed length and CAC can cause 6830 * read length error on truncated packets) 6831 */ 6832 REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00); 6833 REG_WR(bp, QM_REG_QM_INT_MASK, 0); 6834 REG_WR(bp, TM_REG_TM_INT_MASK, 0); 6835 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0); 6836 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0); 6837 REG_WR(bp, XCM_REG_XCM_INT_MASK, 0); 6838/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */ 6839/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */ 6840 REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0); 6841 REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0); 6842 REG_WR(bp, UCM_REG_UCM_INT_MASK, 0); 6843/* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */ 6844/* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */ 6845 REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0); 6846 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0); 6847 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0); 6848 REG_WR(bp, CCM_REG_CCM_INT_MASK, 0); 6849/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */ 6850/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */ 6851 6852 val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT | 6853 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF | 6854 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN; 6855 if (!CHIP_IS_E1x(bp)) 6856 val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED | 6857 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED; 6858 REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val); 6859 6860 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0); 6861 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0); 6862 REG_WR(bp, TCM_REG_TCM_INT_MASK, 0); 6863/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */ 6864 6865 if (!CHIP_IS_E1x(bp)) 6866 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */ 6867 REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff); 6868 6869 REG_WR(bp, CDU_REG_CDU_INT_MASK, 0); 6870 REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0); 6871/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */ 6872 REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */ 6873} 6874 6875static void bnx2x_reset_common(struct bnx2x *bp) 6876{ 6877 u32 val = 0x1400; 6878 6879 /* reset_common */ 6880 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 6881 0xd3ffff7f); 6882 6883 if (CHIP_IS_E3(bp)) { 6884 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; 6885 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; 6886 } 6887 6888 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val); 6889} 6890 6891static void bnx2x_setup_dmae(struct bnx2x *bp) 6892{ 6893 bp->dmae_ready = 0; 6894 spin_lock_init(&bp->dmae_lock); 6895} 6896 6897static void bnx2x_init_pxp(struct bnx2x *bp) 6898{ 6899 u16 devctl; 6900 int r_order, w_order; 6901 6902 pcie_capability_read_word(bp->pdev, PCI_EXP_DEVCTL, &devctl); 6903 DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); 6904 w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); 6905 if (bp->mrrs == -1) 6906 r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); 6907 else { 6908 DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); 6909 r_order = bp->mrrs; 6910 } 6911 6912 bnx2x_init_pxp_arb(bp, r_order, w_order); 6913} 6914 6915static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) 6916{ 6917 int is_required; 6918 u32 val; 6919 int port; 6920 6921 if (BP_NOMCP(bp)) 6922 return; 6923 6924 is_required = 0; 6925 val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) & 6926 SHARED_HW_CFG_FAN_FAILURE_MASK; 6927 6928 if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) 6929 is_required = 1; 6930 6931 /* 6932 * The fan failure mechanism is usually related to the PHY type since 6933 * the power consumption of the board is affected by the PHY. Currently, 6934 * fan is required for most designs with SFX7101, BCM8727 and BCM8481. 6935 */ 6936 else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) 6937 for (port = PORT_0; port < PORT_MAX; port++) { 6938 is_required |= 6939 bnx2x_fan_failure_det_req( 6940 bp, 6941 bp->common.shmem_base, 6942 bp->common.shmem2_base, 6943 port); 6944 } 6945 6946 DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required); 6947 6948 if (is_required == 0) 6949 return; 6950 6951 /* Fan failure is indicated by SPIO 5 */ 6952 bnx2x_set_spio(bp, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z); 6953 6954 /* set to active low mode */ 6955 val = REG_RD(bp, MISC_REG_SPIO_INT); 6956 val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS); 6957 REG_WR(bp, MISC_REG_SPIO_INT, val); 6958 6959 /* enable interrupt to signal the IGU */ 6960 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); 6961 val |= MISC_SPIO_SPIO5; 6962 REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); 6963} 6964 6965void bnx2x_pf_disable(struct bnx2x *bp) 6966{ 6967 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); 6968 val &= ~IGU_PF_CONF_FUNC_EN; 6969 6970 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 6971 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); 6972 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0); 6973} 6974 6975static void bnx2x__common_init_phy(struct bnx2x *bp) 6976{ 6977 u32 shmem_base[2], shmem2_base[2]; 6978 /* Avoid common init in case MFW supports LFA */ 6979 if (SHMEM2_RD(bp, size) > 6980 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) 6981 return; 6982 shmem_base[0] = bp->common.shmem_base; 6983 shmem2_base[0] = bp->common.shmem2_base; 6984 if (!CHIP_IS_E1x(bp)) { 6985 shmem_base[1] = 6986 SHMEM2_RD(bp, other_shmem_base_addr); 6987 shmem2_base[1] = 6988 SHMEM2_RD(bp, other_shmem2_base_addr); 6989 } 6990 bnx2x_acquire_phy_lock(bp); 6991 bnx2x_common_init_phy(bp, shmem_base, shmem2_base, 6992 bp->common.chip_id); 6993 bnx2x_release_phy_lock(bp); 6994} 6995 6996static void bnx2x_config_endianity(struct bnx2x *bp, u32 val) 6997{ 6998 REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, val); 6999 REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, val); 7000 REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, val); 7001 REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, val); 7002 REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, val); 7003 7004 /* make sure this value is 0 */ 7005 REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0); 7006 7007 REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, val); 7008 REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, val); 7009 REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, val); 7010 REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, val); 7011} 7012 7013static void bnx2x_set_endianity(struct bnx2x *bp) 7014{ 7015#ifdef __BIG_ENDIAN 7016 bnx2x_config_endianity(bp, 1); 7017#else 7018 bnx2x_config_endianity(bp, 0); 7019#endif 7020} 7021 7022static void bnx2x_reset_endianity(struct bnx2x *bp) 7023{ 7024 bnx2x_config_endianity(bp, 0); 7025} 7026 7027/** 7028 * bnx2x_init_hw_common - initialize the HW at the COMMON phase. 7029 * 7030 * @bp: driver handle 7031 */ 7032static int bnx2x_init_hw_common(struct bnx2x *bp) 7033{ 7034 u32 val; 7035 7036 DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp)); 7037 7038 /* 7039 * take the RESET lock to protect undi_unload flow from accessing 7040 * registers while we're resetting the chip 7041 */ 7042 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 7043 7044 bnx2x_reset_common(bp); 7045 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); 7046 7047 val = 0xfffc; 7048 if (CHIP_IS_E3(bp)) { 7049 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; 7050 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; 7051 } 7052 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); 7053 7054 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 7055 7056 bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); 7057 7058 if (!CHIP_IS_E1x(bp)) { 7059 u8 abs_func_id; 7060 7061 /** 7062 * 4-port mode or 2-port mode we need to turn of master-enable 7063 * for everyone, after that, turn it back on for self. 7064 * so, we disregard multi-function or not, and always disable 7065 * for all functions on the given path, this means 0,2,4,6 for 7066 * path 0 and 1,3,5,7 for path 1 7067 */ 7068 for (abs_func_id = BP_PATH(bp); 7069 abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) { 7070 if (abs_func_id == BP_ABS_FUNC(bp)) { 7071 REG_WR(bp, 7072 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 7073 1); 7074 continue; 7075 } 7076 7077 bnx2x_pretend_func(bp, abs_func_id); 7078 /* clear pf enable */ 7079 bnx2x_pf_disable(bp); 7080 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); 7081 } 7082 } 7083 7084 bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON); 7085 if (CHIP_IS_E1(bp)) { 7086 /* enable HW interrupt from PXP on USDM overflow 7087 bit 16 on INT_MASK_0 */ 7088 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); 7089 } 7090 7091 bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON); 7092 bnx2x_init_pxp(bp); 7093 bnx2x_set_endianity(bp); 7094 bnx2x_ilt_init_page_size(bp, INITOP_SET); 7095 7096 if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp)) 7097 REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1); 7098 7099 /* let the HW do it's magic ... */ 7100 msleep(100); 7101 /* finish PXP init */ 7102 val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE); 7103 if (val != 1) { 7104 BNX2X_ERR("PXP2 CFG failed\n"); 7105 return -EBUSY; 7106 } 7107 val = REG_RD(bp, PXP2_REG_RD_INIT_DONE); 7108 if (val != 1) { 7109 BNX2X_ERR("PXP2 RD_INIT failed\n"); 7110 return -EBUSY; 7111 } 7112 7113 /* Timers bug workaround E2 only. We need to set the entire ILT to 7114 * have entries with value "0" and valid bit on. 7115 * This needs to be done by the first PF that is loaded in a path 7116 * (i.e. common phase) 7117 */ 7118 if (!CHIP_IS_E1x(bp)) { 7119/* In E2 there is a bug in the timers block that can cause function 6 / 7 7120 * (i.e. vnic3) to start even if it is marked as "scan-off". 7121 * This occurs when a different function (func2,3) is being marked 7122 * as "scan-off". Real-life scenario for example: if a driver is being 7123 * load-unloaded while func6,7 are down. This will cause the timer to access 7124 * the ilt, translate to a logical address and send a request to read/write. 7125 * Since the ilt for the function that is down is not valid, this will cause 7126 * a translation error which is unrecoverable. 7127 * The Workaround is intended to make sure that when this happens nothing fatal 7128 * will occur. The workaround: 7129 * 1. First PF driver which loads on a path will: 7130 * a. After taking the chip out of reset, by using pretend, 7131 * it will write "0" to the following registers of 7132 * the other vnics. 7133 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); 7134 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0); 7135 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0); 7136 * And for itself it will write '1' to 7137 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable 7138 * dmae-operations (writing to pram for example.) 7139 * note: can be done for only function 6,7 but cleaner this 7140 * way. 7141 * b. Write zero+valid to the entire ILT. 7142 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of 7143 * VNIC3 (of that port). The range allocated will be the 7144 * entire ILT. This is needed to prevent ILT range error. 7145 * 2. Any PF driver load flow: 7146 * a. ILT update with the physical addresses of the allocated 7147 * logical pages. 7148 * b. Wait 20msec. - note that this timeout is needed to make 7149 * sure there are no requests in one of the PXP internal 7150 * queues with "old" ILT addresses. 7151 * c. PF enable in the PGLC. 7152 * d. Clear the was_error of the PF in the PGLC. (could have 7153 * occurred while driver was down) 7154 * e. PF enable in the CFC (WEAK + STRONG) 7155 * f. Timers scan enable 7156 * 3. PF driver unload flow: 7157 * a. Clear the Timers scan_en. 7158 * b. Polling for scan_on=0 for that PF. 7159 * c. Clear the PF enable bit in the PXP. 7160 * d. Clear the PF enable in the CFC (WEAK + STRONG) 7161 * e. Write zero+valid to all ILT entries (The valid bit must 7162 * stay set) 7163 * f. If this is VNIC 3 of a port then also init 7164 * first_timers_ilt_entry to zero and last_timers_ilt_entry 7165 * to the last entry in the ILT. 7166 * 7167 * Notes: 7168 * Currently the PF error in the PGLC is non recoverable. 7169 * In the future the there will be a recovery routine for this error. 7170 * Currently attention is masked. 7171 * Having an MCP lock on the load/unload process does not guarantee that 7172 * there is no Timer disable during Func6/7 enable. This is because the 7173 * Timers scan is currently being cleared by the MCP on FLR. 7174 * Step 2.d can be done only for PF6/7 and the driver can also check if 7175 * there is error before clearing it. But the flow above is simpler and 7176 * more general. 7177 * All ILT entries are written by zero+valid and not just PF6/7 7178 * ILT entries since in the future the ILT entries allocation for 7179 * PF-s might be dynamic. 7180 */ 7181 struct ilt_client_info ilt_cli; 7182 struct bnx2x_ilt ilt; 7183 memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); 7184 memset(&ilt, 0, sizeof(struct bnx2x_ilt)); 7185 7186 /* initialize dummy TM client */ 7187 ilt_cli.start = 0; 7188 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; 7189 ilt_cli.client_num = ILT_CLIENT_TM; 7190 7191 /* Step 1: set zeroes to all ilt page entries with valid bit on 7192 * Step 2: set the timers first/last ilt entry to point 7193 * to the entire range to prevent ILT range error for 3rd/4th 7194 * vnic (this code assumes existence of the vnic) 7195 * 7196 * both steps performed by call to bnx2x_ilt_client_init_op() 7197 * with dummy TM client 7198 * 7199 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT 7200 * and his brother are split registers 7201 */ 7202 bnx2x_pretend_func(bp, (BP_PATH(bp) + 6)); 7203 bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR); 7204 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); 7205 7206 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN); 7207 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN); 7208 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1); 7209 } 7210 7211 REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); 7212 REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); 7213 7214 if (!CHIP_IS_E1x(bp)) { 7215 int factor = CHIP_REV_IS_EMUL(bp) ? 1000 : 7216 (CHIP_REV_IS_FPGA(bp) ? 400 : 0); 7217 bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON); 7218 7219 bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON); 7220 7221 /* let the HW do it's magic ... */ 7222 do { 7223 msleep(200); 7224 val = REG_RD(bp, ATC_REG_ATC_INIT_DONE); 7225 } while (factor-- && (val != 1)); 7226 7227 if (val != 1) { 7228 BNX2X_ERR("ATC_INIT failed\n"); 7229 return -EBUSY; 7230 } 7231 } 7232 7233 bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON); 7234 7235 bnx2x_iov_init_dmae(bp); 7236 7237 /* clean the DMAE memory */ 7238 bp->dmae_ready = 1; 7239 bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1); 7240 7241 bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON); 7242 7243 bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON); 7244 7245 bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON); 7246 7247 bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON); 7248 7249 bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3); 7250 bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3); 7251 bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3); 7252 bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3); 7253 7254 bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON); 7255 7256 /* QM queues pointers table */ 7257 bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET); 7258 7259 /* soft reset pulse */ 7260 REG_WR(bp, QM_REG_SOFT_RESET, 1); 7261 REG_WR(bp, QM_REG_SOFT_RESET, 0); 7262 7263 if (CNIC_SUPPORT(bp)) 7264 bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON); 7265 7266 bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON); 7267 7268 if (!CHIP_REV_IS_SLOW(bp)) 7269 /* enable hw interrupt from doorbell Q */ 7270 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); 7271 7272 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); 7273 7274 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); 7275 REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); 7276 7277 if (!CHIP_IS_E1(bp)) 7278 REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan); 7279 7280 if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) { 7281 if (IS_MF_AFEX(bp)) { 7282 /* configure that VNTag and VLAN headers must be 7283 * received in afex mode 7284 */ 7285 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 0xE); 7286 REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, 0xA); 7287 REG_WR(bp, PRS_REG_HDRS_AFTER_TAG_0, 0x6); 7288 REG_WR(bp, PRS_REG_TAG_ETHERTYPE_0, 0x8926); 7289 REG_WR(bp, PRS_REG_TAG_LEN_0, 0x4); 7290 } else { 7291 /* Bit-map indicating which L2 hdrs may appear 7292 * after the basic Ethernet header 7293 */ 7294 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 7295 bp->path_has_ovlan ? 7 : 6); 7296 } 7297 } 7298 7299 bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON); 7300 bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON); 7301 bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON); 7302 bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON); 7303 7304 if (!CHIP_IS_E1x(bp)) { 7305 /* reset VFC memories */ 7306 REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, 7307 VFC_MEMORIES_RST_REG_CAM_RST | 7308 VFC_MEMORIES_RST_REG_RAM_RST); 7309 REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, 7310 VFC_MEMORIES_RST_REG_CAM_RST | 7311 VFC_MEMORIES_RST_REG_RAM_RST); 7312 7313 msleep(20); 7314 } 7315 7316 bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON); 7317 bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON); 7318 bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON); 7319 bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON); 7320 7321 /* sync semi rtc */ 7322 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 7323 0x80000000); 7324 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 7325 0x80000000); 7326 7327 bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON); 7328 bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON); 7329 bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON); 7330 7331 if (!CHIP_IS_E1x(bp)) { 7332 if (IS_MF_AFEX(bp)) { 7333 /* configure that VNTag and VLAN headers must be 7334 * sent in afex mode 7335 */ 7336 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 0xE); 7337 REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, 0xA); 7338 REG_WR(bp, PBF_REG_HDRS_AFTER_TAG_0, 0x6); 7339 REG_WR(bp, PBF_REG_TAG_ETHERTYPE_0, 0x8926); 7340 REG_WR(bp, PBF_REG_TAG_LEN_0, 0x4); 7341 } else { 7342 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 7343 bp->path_has_ovlan ? 7 : 6); 7344 } 7345 } 7346 7347 REG_WR(bp, SRC_REG_SOFT_RST, 1); 7348 7349 bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON); 7350 7351 if (CNIC_SUPPORT(bp)) { 7352 REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672); 7353 REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc); 7354 REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b); 7355 REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a); 7356 REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116); 7357 REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b); 7358 REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf); 7359 REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09); 7360 REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f); 7361 REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7); 7362 } 7363 REG_WR(bp, SRC_REG_SOFT_RST, 0); 7364 7365 if (sizeof(union cdu_context) != 1024) 7366 /* we currently assume that a context is 1024 bytes */ 7367 dev_alert(&bp->pdev->dev, 7368 "please adjust the size of cdu_context(%ld)\n", 7369 (long)sizeof(union cdu_context)); 7370 7371 bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON); 7372 val = (4 << 24) + (0 << 12) + 1024; 7373 REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val); 7374 7375 bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON); 7376 REG_WR(bp, CFC_REG_INIT_REG, 0x7FF); 7377 /* enable context validation interrupt from CFC */ 7378 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); 7379 7380 /* set the thresholds to prevent CFC/CDU race */ 7381 REG_WR(bp, CFC_REG_DEBUG0, 0x20020000); 7382 7383 bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON); 7384 7385 if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp)) 7386 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36); 7387 7388 bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON); 7389 bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON); 7390 7391 /* Reset PCIE errors for debug */ 7392 REG_WR(bp, 0x2814, 0xffffffff); 7393 REG_WR(bp, 0x3820, 0xffffffff); 7394 7395 if (!CHIP_IS_E1x(bp)) { 7396 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5, 7397 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 | 7398 PXPCS_TL_CONTROL_5_ERR_UNSPPORT)); 7399 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT, 7400 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 | 7401 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 | 7402 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2)); 7403 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT, 7404 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 | 7405 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 | 7406 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5)); 7407 } 7408 7409 bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON); 7410 if (!CHIP_IS_E1(bp)) { 7411 /* in E3 this done in per-port section */ 7412 if (!CHIP_IS_E3(bp)) 7413 REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp)); 7414 } 7415 if (CHIP_IS_E1H(bp)) 7416 /* not applicable for E2 (and above ...) */ 7417 REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp)); 7418 7419 if (CHIP_REV_IS_SLOW(bp)) 7420 msleep(200); 7421 7422 /* finish CFC init */ 7423 val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10); 7424 if (val != 1) { 7425 BNX2X_ERR("CFC LL_INIT failed\n"); 7426 return -EBUSY; 7427 } 7428 val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10); 7429 if (val != 1) { 7430 BNX2X_ERR("CFC AC_INIT failed\n"); 7431 return -EBUSY; 7432 } 7433 val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10); 7434 if (val != 1) { 7435 BNX2X_ERR("CFC CAM_INIT failed\n"); 7436 return -EBUSY; 7437 } 7438 REG_WR(bp, CFC_REG_DEBUG0, 0); 7439 7440 if (CHIP_IS_E1(bp)) { 7441 /* read NIG statistic 7442 to see if this is our first up since powerup */ 7443 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); 7444 val = *bnx2x_sp(bp, wb_data[0]); 7445 7446 /* do internal memory self test */ 7447 if ((val == 0) && bnx2x_int_mem_test(bp)) { 7448 BNX2X_ERR("internal mem self test failed\n"); 7449 return -EBUSY; 7450 } 7451 } 7452 7453 bnx2x_setup_fan_failure_detection(bp); 7454 7455 /* clear PXP2 attentions */ 7456 REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0); 7457 7458 bnx2x_enable_blocks_attention(bp); 7459 bnx2x_enable_blocks_parity(bp); 7460 7461 if (!BP_NOMCP(bp)) { 7462 if (CHIP_IS_E1x(bp)) 7463 bnx2x__common_init_phy(bp); 7464 } else 7465 BNX2X_ERR("Bootcode is missing - can not initialize link\n"); 7466 7467 if (SHMEM2_HAS(bp, netproc_fw_ver)) 7468 SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM)); 7469 7470 return 0; 7471} 7472 7473/** 7474 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase. 7475 * 7476 * @bp: driver handle 7477 */ 7478static int bnx2x_init_hw_common_chip(struct bnx2x *bp) 7479{ 7480 int rc = bnx2x_init_hw_common(bp); 7481 7482 if (rc) 7483 return rc; 7484 7485 /* In E2 2-PORT mode, same ext phy is used for the two paths */ 7486 if (!BP_NOMCP(bp)) 7487 bnx2x__common_init_phy(bp); 7488 7489 return 0; 7490} 7491 7492static int bnx2x_init_hw_port(struct bnx2x *bp) 7493{ 7494 int port = BP_PORT(bp); 7495 int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; 7496 u32 low, high; 7497 u32 val, reg; 7498 7499 DP(NETIF_MSG_HW, "starting port init port %d\n", port); 7500 7501 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); 7502 7503 bnx2x_init_block(bp, BLOCK_MISC, init_phase); 7504 bnx2x_init_block(bp, BLOCK_PXP, init_phase); 7505 bnx2x_init_block(bp, BLOCK_PXP2, init_phase); 7506 7507 /* Timers bug workaround: disables the pf_master bit in pglue at 7508 * common phase, we need to enable it here before any dmae access are 7509 * attempted. Therefore we manually added the enable-master to the 7510 * port phase (it also happens in the function phase) 7511 */ 7512 if (!CHIP_IS_E1x(bp)) 7513 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); 7514 7515 bnx2x_init_block(bp, BLOCK_ATC, init_phase); 7516 bnx2x_init_block(bp, BLOCK_DMAE, init_phase); 7517 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); 7518 bnx2x_init_block(bp, BLOCK_QM, init_phase); 7519 7520 bnx2x_init_block(bp, BLOCK_TCM, init_phase); 7521 bnx2x_init_block(bp, BLOCK_UCM, init_phase); 7522 bnx2x_init_block(bp, BLOCK_CCM, init_phase); 7523 bnx2x_init_block(bp, BLOCK_XCM, init_phase); 7524 7525 /* QM cid (connection) count */ 7526 bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET); 7527 7528 if (CNIC_SUPPORT(bp)) { 7529 bnx2x_init_block(bp, BLOCK_TM, init_phase); 7530 REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20); 7531 REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31); 7532 } 7533 7534 bnx2x_init_block(bp, BLOCK_DORQ, init_phase); 7535 7536 bnx2x_init_block(bp, BLOCK_BRB1, init_phase); 7537 7538 if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { 7539 7540 if (IS_MF(bp)) 7541 low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); 7542 else if (bp->dev->mtu > 4096) { 7543 if (bp->flags & ONE_PORT_FLAG) 7544 low = 160; 7545 else { 7546 val = bp->dev->mtu; 7547 /* (24*1024 + val*4)/256 */ 7548 low = 96 + (val/64) + 7549 ((val % 64) ? 1 : 0); 7550 } 7551 } else 7552 low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160); 7553 high = low + 56; /* 14*1024/256 */ 7554 REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low); 7555 REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high); 7556 } 7557 7558 if (CHIP_MODE_IS_4_PORT(bp)) 7559 REG_WR(bp, (BP_PORT(bp) ? 7560 BRB1_REG_MAC_GUARANTIED_1 : 7561 BRB1_REG_MAC_GUARANTIED_0), 40); 7562 7563 bnx2x_init_block(bp, BLOCK_PRS, init_phase); 7564 if (CHIP_IS_E3B0(bp)) { 7565 if (IS_MF_AFEX(bp)) { 7566 /* configure headers for AFEX mode */ 7567 REG_WR(bp, BP_PORT(bp) ? 7568 PRS_REG_HDRS_AFTER_BASIC_PORT_1 : 7569 PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE); 7570 REG_WR(bp, BP_PORT(bp) ? 7571 PRS_REG_HDRS_AFTER_TAG_0_PORT_1 : 7572 PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6); 7573 REG_WR(bp, BP_PORT(bp) ? 7574 PRS_REG_MUST_HAVE_HDRS_PORT_1 : 7575 PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA); 7576 } else { 7577 /* Ovlan exists only if we are in multi-function + 7578 * switch-dependent mode, in switch-independent there 7579 * is no ovlan headers 7580 */ 7581 REG_WR(bp, BP_PORT(bp) ? 7582 PRS_REG_HDRS_AFTER_BASIC_PORT_1 : 7583 PRS_REG_HDRS_AFTER_BASIC_PORT_0, 7584 (bp->path_has_ovlan ? 7 : 6)); 7585 } 7586 } 7587 7588 bnx2x_init_block(bp, BLOCK_TSDM, init_phase); 7589 bnx2x_init_block(bp, BLOCK_CSDM, init_phase); 7590 bnx2x_init_block(bp, BLOCK_USDM, init_phase); 7591 bnx2x_init_block(bp, BLOCK_XSDM, init_phase); 7592 7593 bnx2x_init_block(bp, BLOCK_TSEM, init_phase); 7594 bnx2x_init_block(bp, BLOCK_USEM, init_phase); 7595 bnx2x_init_block(bp, BLOCK_CSEM, init_phase); 7596 bnx2x_init_block(bp, BLOCK_XSEM, init_phase); 7597 7598 bnx2x_init_block(bp, BLOCK_UPB, init_phase); 7599 bnx2x_init_block(bp, BLOCK_XPB, init_phase); 7600 7601 bnx2x_init_block(bp, BLOCK_PBF, init_phase); 7602 7603 if (CHIP_IS_E1x(bp)) { 7604 /* configure PBF to work without PAUSE mtu 9000 */ 7605 REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); 7606 7607 /* update threshold */ 7608 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16)); 7609 /* update init credit */ 7610 REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22); 7611 7612 /* probe changes */ 7613 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1); 7614 udelay(50); 7615 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0); 7616 } 7617 7618 if (CNIC_SUPPORT(bp)) 7619 bnx2x_init_block(bp, BLOCK_SRC, init_phase); 7620 7621 bnx2x_init_block(bp, BLOCK_CDU, init_phase); 7622 bnx2x_init_block(bp, BLOCK_CFC, init_phase); 7623 7624 if (CHIP_IS_E1(bp)) { 7625 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); 7626 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); 7627 } 7628 bnx2x_init_block(bp, BLOCK_HC, init_phase); 7629 7630 bnx2x_init_block(bp, BLOCK_IGU, init_phase); 7631 7632 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); 7633 /* init aeu_mask_attn_func_0/1: 7634 * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use 7635 * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF 7636 * bits 4-7 are used for "per vn group attention" */ 7637 val = IS_MF(bp) ? 0xF7 : 0x7; 7638 /* Enable DCBX attention for all but E1 */ 7639 val |= CHIP_IS_E1(bp) ? 0 : 0x10; 7640 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); 7641 7642 /* SCPAD_PARITY should NOT trigger close the gates */ 7643 reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0; 7644 REG_WR(bp, reg, 7645 REG_RD(bp, reg) & 7646 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); 7647 7648 reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0; 7649 REG_WR(bp, reg, 7650 REG_RD(bp, reg) & 7651 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); 7652 7653 bnx2x_init_block(bp, BLOCK_NIG, init_phase); 7654 7655 if (!CHIP_IS_E1x(bp)) { 7656 /* Bit-map indicating which L2 hdrs may appear after the 7657 * basic Ethernet header 7658 */ 7659 if (IS_MF_AFEX(bp)) 7660 REG_WR(bp, BP_PORT(bp) ? 7661 NIG_REG_P1_HDRS_AFTER_BASIC : 7662 NIG_REG_P0_HDRS_AFTER_BASIC, 0xE); 7663 else 7664 REG_WR(bp, BP_PORT(bp) ? 7665 NIG_REG_P1_HDRS_AFTER_BASIC : 7666 NIG_REG_P0_HDRS_AFTER_BASIC, 7667 IS_MF_SD(bp) ? 7 : 6); 7668 7669 if (CHIP_IS_E3(bp)) 7670 REG_WR(bp, BP_PORT(bp) ? 7671 NIG_REG_LLH1_MF_MODE : 7672 NIG_REG_LLH_MF_MODE, IS_MF(bp)); 7673 } 7674 if (!CHIP_IS_E3(bp)) 7675 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); 7676 7677 if (!CHIP_IS_E1(bp)) { 7678 /* 0x2 disable mf_ov, 0x1 enable */ 7679 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4, 7680 (IS_MF_SD(bp) ? 0x1 : 0x2)); 7681 7682 if (!CHIP_IS_E1x(bp)) { 7683 val = 0; 7684 switch (bp->mf_mode) { 7685 case MULTI_FUNCTION_SD: 7686 val = 1; 7687 break; 7688 case MULTI_FUNCTION_SI: 7689 case MULTI_FUNCTION_AFEX: 7690 val = 2; 7691 break; 7692 } 7693 7694 REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE : 7695 NIG_REG_LLH0_CLS_TYPE), val); 7696 } 7697 { 7698 REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0); 7699 REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0); 7700 REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1); 7701 } 7702 } 7703 7704 /* If SPIO5 is set to generate interrupts, enable it for this port */ 7705 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); 7706 if (val & MISC_SPIO_SPIO5) { 7707 u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : 7708 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); 7709 val = REG_RD(bp, reg_addr); 7710 val |= AEU_INPUTS_ATTN_BITS_SPIO5; 7711 REG_WR(bp, reg_addr, val); 7712 } 7713 7714 return 0; 7715} 7716 7717static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr) 7718{ 7719 int reg; 7720 u32 wb_write[2]; 7721 7722 if (CHIP_IS_E1(bp)) 7723 reg = PXP2_REG_RQ_ONCHIP_AT + index*8; 7724 else 7725 reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8; 7726 7727 wb_write[0] = ONCHIP_ADDR1(addr); 7728 wb_write[1] = ONCHIP_ADDR2(addr); 7729 REG_WR_DMAE(bp, reg, wb_write, 2); 7730} 7731 7732void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf) 7733{ 7734 u32 data, ctl, cnt = 100; 7735 u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; 7736 u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; 7737 u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4; 7738 u32 sb_bit = 1 << (idu_sb_id%32); 7739 u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT; 7740 u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id; 7741 7742 /* Not supported in BC mode */ 7743 if (CHIP_INT_MODE_IS_BC(bp)) 7744 return; 7745 7746 data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 7747 << IGU_REGULAR_CLEANUP_TYPE_SHIFT) | 7748 IGU_REGULAR_CLEANUP_SET | 7749 IGU_REGULAR_BCLEANUP; 7750 7751 ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | 7752 func_encode << IGU_CTRL_REG_FID_SHIFT | 7753 IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; 7754 7755 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", 7756 data, igu_addr_data); 7757 REG_WR(bp, igu_addr_data, data); 7758 mmiowb(); 7759 barrier(); 7760 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", 7761 ctl, igu_addr_ctl); 7762 REG_WR(bp, igu_addr_ctl, ctl); 7763 mmiowb(); 7764 barrier(); 7765 7766 /* wait for clean up to finish */ 7767 while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt) 7768 msleep(20); 7769 7770 if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) { 7771 DP(NETIF_MSG_HW, 7772 "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n", 7773 idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt); 7774 } 7775} 7776 7777static void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id) 7778{ 7779 bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/); 7780} 7781 7782static void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func) 7783{ 7784 u32 i, base = FUNC_ILT_BASE(func); 7785 for (i = base; i < base + ILT_PER_FUNC; i++) 7786 bnx2x_ilt_wr(bp, i, 0); 7787} 7788 7789static void bnx2x_init_searcher(struct bnx2x *bp) 7790{ 7791 int port = BP_PORT(bp); 7792 bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM); 7793 /* T1 hash bits value determines the T1 number of entries */ 7794 REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS); 7795} 7796 7797static inline int bnx2x_func_switch_update(struct bnx2x *bp, int suspend) 7798{ 7799 int rc; 7800 struct bnx2x_func_state_params func_params = {NULL}; 7801 struct bnx2x_func_switch_update_params *switch_update_params = 7802 &func_params.params.switch_update; 7803 7804 /* Prepare parameters for function state transitions */ 7805 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 7806 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 7807 7808 func_params.f_obj = &bp->func_obj; 7809 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; 7810 7811 /* Function parameters */ 7812 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, 7813 &switch_update_params->changes); 7814 if (suspend) 7815 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, 7816 &switch_update_params->changes); 7817 7818 rc = bnx2x_func_state_change(bp, &func_params); 7819 7820 return rc; 7821} 7822 7823static int bnx2x_reset_nic_mode(struct bnx2x *bp) 7824{ 7825 int rc, i, port = BP_PORT(bp); 7826 int vlan_en = 0, mac_en[NUM_MACS]; 7827 7828 /* Close input from network */ 7829 if (bp->mf_mode == SINGLE_FUNCTION) { 7830 bnx2x_set_rx_filter(&bp->link_params, 0); 7831 } else { 7832 vlan_en = REG_RD(bp, port ? NIG_REG_LLH1_FUNC_EN : 7833 NIG_REG_LLH0_FUNC_EN); 7834 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : 7835 NIG_REG_LLH0_FUNC_EN, 0); 7836 for (i = 0; i < NUM_MACS; i++) { 7837 mac_en[i] = REG_RD(bp, port ? 7838 (NIG_REG_LLH1_FUNC_MEM_ENABLE + 7839 4 * i) : 7840 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 7841 4 * i)); 7842 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + 7843 4 * i) : 7844 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 0); 7845 } 7846 } 7847 7848 /* Close BMC to host */ 7849 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : 7850 NIG_REG_P1_TX_MNG_HOST_ENABLE, 0); 7851 7852 /* Suspend Tx switching to the PF. Completion of this ramrod 7853 * further guarantees that all the packets of that PF / child 7854 * VFs in BRB were processed by the Parser, so it is safe to 7855 * change the NIC_MODE register. 7856 */ 7857 rc = bnx2x_func_switch_update(bp, 1); 7858 if (rc) { 7859 BNX2X_ERR("Can't suspend tx-switching!\n"); 7860 return rc; 7861 } 7862 7863 /* Change NIC_MODE register */ 7864 REG_WR(bp, PRS_REG_NIC_MODE, 0); 7865 7866 /* Open input from network */ 7867 if (bp->mf_mode == SINGLE_FUNCTION) { 7868 bnx2x_set_rx_filter(&bp->link_params, 1); 7869 } else { 7870 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : 7871 NIG_REG_LLH0_FUNC_EN, vlan_en); 7872 for (i = 0; i < NUM_MACS; i++) { 7873 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + 7874 4 * i) : 7875 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 7876 mac_en[i]); 7877 } 7878 } 7879 7880 /* Enable BMC to host */ 7881 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : 7882 NIG_REG_P1_TX_MNG_HOST_ENABLE, 1); 7883 7884 /* Resume Tx switching to the PF */ 7885 rc = bnx2x_func_switch_update(bp, 0); 7886 if (rc) { 7887 BNX2X_ERR("Can't resume tx-switching!\n"); 7888 return rc; 7889 } 7890 7891 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); 7892 return 0; 7893} 7894 7895int bnx2x_init_hw_func_cnic(struct bnx2x *bp) 7896{ 7897 int rc; 7898 7899 bnx2x_ilt_init_op_cnic(bp, INITOP_SET); 7900 7901 if (CONFIGURE_NIC_MODE(bp)) { 7902 /* Configure searcher as part of function hw init */ 7903 bnx2x_init_searcher(bp); 7904 7905 /* Reset NIC mode */ 7906 rc = bnx2x_reset_nic_mode(bp); 7907 if (rc) 7908 BNX2X_ERR("Can't change NIC mode!\n"); 7909 return rc; 7910 } 7911 7912 return 0; 7913} 7914 7915/* previous driver DMAE transaction may have occurred when pre-boot stage ended 7916 * and boot began, or when kdump kernel was loaded. Either case would invalidate 7917 * the addresses of the transaction, resulting in was-error bit set in the pci 7918 * causing all hw-to-host pcie transactions to timeout. If this happened we want 7919 * to clear the interrupt which detected this from the pglueb and the was done 7920 * bit 7921 */ 7922static void bnx2x_clean_pglue_errors(struct bnx2x *bp) 7923{ 7924 if (!CHIP_IS_E1x(bp)) 7925 REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 7926 1 << BP_ABS_FUNC(bp)); 7927} 7928 7929static int bnx2x_init_hw_func(struct bnx2x *bp) 7930{ 7931 int port = BP_PORT(bp); 7932 int func = BP_FUNC(bp); 7933 int init_phase = PHASE_PF0 + func; 7934 struct bnx2x_ilt *ilt = BP_ILT(bp); 7935 u16 cdu_ilt_start; 7936 u32 addr, val; 7937 u32 main_mem_base, main_mem_size, main_mem_prty_clr; 7938 int i, main_mem_width, rc; 7939 7940 DP(NETIF_MSG_HW, "starting func init func %d\n", func); 7941 7942 /* FLR cleanup - hmmm */ 7943 if (!CHIP_IS_E1x(bp)) { 7944 rc = bnx2x_pf_flr_clnup(bp); 7945 if (rc) { 7946 bnx2x_fw_dump(bp); 7947 return rc; 7948 } 7949 } 7950 7951 /* set MSI reconfigure capability */ 7952 if (bp->common.int_block == INT_BLOCK_HC) { 7953 addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0); 7954 val = REG_RD(bp, addr); 7955 val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0; 7956 REG_WR(bp, addr, val); 7957 } 7958 7959 bnx2x_init_block(bp, BLOCK_PXP, init_phase); 7960 bnx2x_init_block(bp, BLOCK_PXP2, init_phase); 7961 7962 ilt = BP_ILT(bp); 7963 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; 7964 7965 if (IS_SRIOV(bp)) 7966 cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS; 7967 cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start); 7968 7969 /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes 7970 * those of the VFs, so start line should be reset 7971 */ 7972 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; 7973 for (i = 0; i < L2_ILT_LINES(bp); i++) { 7974 ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt; 7975 ilt->lines[cdu_ilt_start + i].page_mapping = 7976 bp->context[i].cxt_mapping; 7977 ilt->lines[cdu_ilt_start + i].size = bp->context[i].size; 7978 } 7979 7980 bnx2x_ilt_init_op(bp, INITOP_SET); 7981 7982 if (!CONFIGURE_NIC_MODE(bp)) { 7983 bnx2x_init_searcher(bp); 7984 REG_WR(bp, PRS_REG_NIC_MODE, 0); 7985 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); 7986 } else { 7987 /* Set NIC mode */ 7988 REG_WR(bp, PRS_REG_NIC_MODE, 1); 7989 DP(NETIF_MSG_IFUP, "NIC MODE configured\n"); 7990 } 7991 7992 if (!CHIP_IS_E1x(bp)) { 7993 u32 pf_conf = IGU_PF_CONF_FUNC_EN; 7994 7995 /* Turn on a single ISR mode in IGU if driver is going to use 7996 * INT#x or MSI 7997 */ 7998 if (!(bp->flags & USING_MSIX_FLAG)) 7999 pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN; 8000 /* 8001 * Timers workaround bug: function init part. 8002 * Need to wait 20msec after initializing ILT, 8003 * needed to make sure there are no requests in 8004 * one of the PXP internal queues with "old" ILT addresses 8005 */ 8006 msleep(20); 8007 /* 8008 * Master enable - Due to WB DMAE writes performed before this 8009 * register is re-initialized as part of the regular function 8010 * init 8011 */ 8012 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); 8013 /* Enable the function in IGU */ 8014 REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf); 8015 } 8016 8017 bp->dmae_ready = 1; 8018 8019 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); 8020 8021 bnx2x_clean_pglue_errors(bp); 8022 8023 bnx2x_init_block(bp, BLOCK_ATC, init_phase); 8024 bnx2x_init_block(bp, BLOCK_DMAE, init_phase); 8025 bnx2x_init_block(bp, BLOCK_NIG, init_phase); 8026 bnx2x_init_block(bp, BLOCK_SRC, init_phase); 8027 bnx2x_init_block(bp, BLOCK_MISC, init_phase); 8028 bnx2x_init_block(bp, BLOCK_TCM, init_phase); 8029 bnx2x_init_block(bp, BLOCK_UCM, init_phase); 8030 bnx2x_init_block(bp, BLOCK_CCM, init_phase); 8031 bnx2x_init_block(bp, BLOCK_XCM, init_phase); 8032 bnx2x_init_block(bp, BLOCK_TSEM, init_phase); 8033 bnx2x_init_block(bp, BLOCK_USEM, init_phase); 8034 bnx2x_init_block(bp, BLOCK_CSEM, init_phase); 8035 bnx2x_init_block(bp, BLOCK_XSEM, init_phase); 8036 8037 if (!CHIP_IS_E1x(bp)) 8038 REG_WR(bp, QM_REG_PF_EN, 1); 8039 8040 if (!CHIP_IS_E1x(bp)) { 8041 REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 8042 REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 8043 REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 8044 REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 8045 } 8046 bnx2x_init_block(bp, BLOCK_QM, init_phase); 8047 8048 bnx2x_init_block(bp, BLOCK_TM, init_phase); 8049 bnx2x_init_block(bp, BLOCK_DORQ, init_phase); 8050 REG_WR(bp, DORQ_REG_MODE_ACT, 1); /* no dpm */ 8051 8052 bnx2x_iov_init_dq(bp); 8053 8054 bnx2x_init_block(bp, BLOCK_BRB1, init_phase); 8055 bnx2x_init_block(bp, BLOCK_PRS, init_phase); 8056 bnx2x_init_block(bp, BLOCK_TSDM, init_phase); 8057 bnx2x_init_block(bp, BLOCK_CSDM, init_phase); 8058 bnx2x_init_block(bp, BLOCK_USDM, init_phase); 8059 bnx2x_init_block(bp, BLOCK_XSDM, init_phase); 8060 bnx2x_init_block(bp, BLOCK_UPB, init_phase); 8061 bnx2x_init_block(bp, BLOCK_XPB, init_phase); 8062 bnx2x_init_block(bp, BLOCK_PBF, init_phase); 8063 if (!CHIP_IS_E1x(bp)) 8064 REG_WR(bp, PBF_REG_DISABLE_PF, 0); 8065 8066 bnx2x_init_block(bp, BLOCK_CDU, init_phase); 8067 8068 bnx2x_init_block(bp, BLOCK_CFC, init_phase); 8069 8070 if (!CHIP_IS_E1x(bp)) 8071 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1); 8072 8073 if (IS_MF(bp)) { 8074 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) { 8075 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); 8076 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, 8077 bp->mf_ov); 8078 } 8079 } 8080 8081 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); 8082 8083 /* HC init per function */ 8084 if (bp->common.int_block == INT_BLOCK_HC) { 8085 if (CHIP_IS_E1H(bp)) { 8086 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); 8087 8088 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); 8089 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); 8090 } 8091 bnx2x_init_block(bp, BLOCK_HC, init_phase); 8092 8093 } else { 8094 int num_segs, sb_idx, prod_offset; 8095 8096 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); 8097 8098 if (!CHIP_IS_E1x(bp)) { 8099 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); 8100 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); 8101 } 8102 8103 bnx2x_init_block(bp, BLOCK_IGU, init_phase); 8104 8105 if (!CHIP_IS_E1x(bp)) { 8106 int dsb_idx = 0; 8107 /** 8108 * Producer memory: 8109 * E2 mode: address 0-135 match to the mapping memory; 8110 * 136 - PF0 default prod; 137 - PF1 default prod; 8111 * 138 - PF2 default prod; 139 - PF3 default prod; 8112 * 140 - PF0 attn prod; 141 - PF1 attn prod; 8113 * 142 - PF2 attn prod; 143 - PF3 attn prod; 8114 * 144-147 reserved. 8115 * 8116 * E1.5 mode - In backward compatible mode; 8117 * for non default SB; each even line in the memory 8118 * holds the U producer and each odd line hold 8119 * the C producer. The first 128 producers are for 8120 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20 8121 * producers are for the DSB for each PF. 8122 * Each PF has five segments: (the order inside each 8123 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods; 8124 * 132-135 C prods; 136-139 X prods; 140-143 T prods; 8125 * 144-147 attn prods; 8126 */ 8127 /* non-default-status-blocks */ 8128 num_segs = CHIP_INT_MODE_IS_BC(bp) ? 8129 IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS; 8130 for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) { 8131 prod_offset = (bp->igu_base_sb + sb_idx) * 8132 num_segs; 8133 8134 for (i = 0; i < num_segs; i++) { 8135 addr = IGU_REG_PROD_CONS_MEMORY + 8136 (prod_offset + i) * 4; 8137 REG_WR(bp, addr, 0); 8138 } 8139 /* send consumer update with value 0 */ 8140 bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx, 8141 USTORM_ID, 0, IGU_INT_NOP, 1); 8142 bnx2x_igu_clear_sb(bp, 8143 bp->igu_base_sb + sb_idx); 8144 } 8145 8146 /* default-status-blocks */ 8147 num_segs = CHIP_INT_MODE_IS_BC(bp) ? 8148 IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS; 8149 8150 if (CHIP_MODE_IS_4_PORT(bp)) 8151 dsb_idx = BP_FUNC(bp); 8152 else 8153 dsb_idx = BP_VN(bp); 8154 8155 prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? 8156 IGU_BC_BASE_DSB_PROD + dsb_idx : 8157 IGU_NORM_BASE_DSB_PROD + dsb_idx); 8158 8159 /* 8160 * igu prods come in chunks of E1HVN_MAX (4) - 8161 * does not matters what is the current chip mode 8162 */ 8163 for (i = 0; i < (num_segs * E1HVN_MAX); 8164 i += E1HVN_MAX) { 8165 addr = IGU_REG_PROD_CONS_MEMORY + 8166 (prod_offset + i)*4; 8167 REG_WR(bp, addr, 0); 8168 } 8169 /* send consumer update with 0 */ 8170 if (CHIP_INT_MODE_IS_BC(bp)) { 8171 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8172 USTORM_ID, 0, IGU_INT_NOP, 1); 8173 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8174 CSTORM_ID, 0, IGU_INT_NOP, 1); 8175 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8176 XSTORM_ID, 0, IGU_INT_NOP, 1); 8177 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8178 TSTORM_ID, 0, IGU_INT_NOP, 1); 8179 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8180 ATTENTION_ID, 0, IGU_INT_NOP, 1); 8181 } else { 8182 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8183 USTORM_ID, 0, IGU_INT_NOP, 1); 8184 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8185 ATTENTION_ID, 0, IGU_INT_NOP, 1); 8186 } 8187 bnx2x_igu_clear_sb(bp, bp->igu_dsb_id); 8188 8189 /* !!! These should become driver const once 8190 rf-tool supports split-68 const */ 8191 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); 8192 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); 8193 REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); 8194 REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); 8195 REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); 8196 REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); 8197 } 8198 } 8199 8200 /* Reset PCIE errors for debug */ 8201 REG_WR(bp, 0x2114, 0xffffffff); 8202 REG_WR(bp, 0x2120, 0xffffffff); 8203 8204 if (CHIP_IS_E1x(bp)) { 8205 main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/ 8206 main_mem_base = HC_REG_MAIN_MEMORY + 8207 BP_PORT(bp) * (main_mem_size * 4); 8208 main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR; 8209 main_mem_width = 8; 8210 8211 val = REG_RD(bp, main_mem_prty_clr); 8212 if (val) 8213 DP(NETIF_MSG_HW, 8214 "Hmmm... Parity errors in HC block during function init (0x%x)!\n", 8215 val); 8216 8217 /* Clear "false" parity errors in MSI-X table */ 8218 for (i = main_mem_base; 8219 i < main_mem_base + main_mem_size * 4; 8220 i += main_mem_width) { 8221 bnx2x_read_dmae(bp, i, main_mem_width / 4); 8222 bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), 8223 i, main_mem_width / 4); 8224 } 8225 /* Clear HC parity attention */ 8226 REG_RD(bp, main_mem_prty_clr); 8227 } 8228 8229#ifdef BNX2X_STOP_ON_ERROR 8230 /* Enable STORMs SP logging */ 8231 REG_WR8(bp, BAR_USTRORM_INTMEM + 8232 USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8233 REG_WR8(bp, BAR_TSTRORM_INTMEM + 8234 TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8235 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8236 CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8237 REG_WR8(bp, BAR_XSTRORM_INTMEM + 8238 XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8239#endif 8240 8241 bnx2x_phy_probe(&bp->link_params); 8242 8243 return 0; 8244} 8245 8246void bnx2x_free_mem_cnic(struct bnx2x *bp) 8247{ 8248 bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_FREE); 8249 8250 if (!CHIP_IS_E1x(bp)) 8251 BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping, 8252 sizeof(struct host_hc_status_block_e2)); 8253 else 8254 BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping, 8255 sizeof(struct host_hc_status_block_e1x)); 8256 8257 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); 8258} 8259 8260void bnx2x_free_mem(struct bnx2x *bp) 8261{ 8262 int i; 8263 8264 BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, 8265 bp->fw_stats_data_sz + bp->fw_stats_req_sz); 8266 8267 if (IS_VF(bp)) 8268 return; 8269 8270 BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping, 8271 sizeof(struct host_sp_status_block)); 8272 8273 BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping, 8274 sizeof(struct bnx2x_slowpath)); 8275 8276 for (i = 0; i < L2_ILT_LINES(bp); i++) 8277 BNX2X_PCI_FREE(bp->context[i].vcxt, bp->context[i].cxt_mapping, 8278 bp->context[i].size); 8279 bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE); 8280 8281 BNX2X_FREE(bp->ilt->lines); 8282 8283 BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE); 8284 8285 BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping, 8286 BCM_PAGE_SIZE * NUM_EQ_PAGES); 8287 8288 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); 8289 8290 bnx2x_iov_free_mem(bp); 8291} 8292 8293int bnx2x_alloc_mem_cnic(struct bnx2x *bp) 8294{ 8295 if (!CHIP_IS_E1x(bp)) { 8296 /* size = the status block + ramrod buffers */ 8297 bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, 8298 sizeof(struct host_hc_status_block_e2)); 8299 if (!bp->cnic_sb.e2_sb) 8300 goto alloc_mem_err; 8301 } else { 8302 bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, 8303 sizeof(struct host_hc_status_block_e1x)); 8304 if (!bp->cnic_sb.e1x_sb) 8305 goto alloc_mem_err; 8306 } 8307 8308 if (CONFIGURE_NIC_MODE(bp) && !bp->t2) { 8309 /* allocate searcher T2 table, as it wasn't allocated before */ 8310 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); 8311 if (!bp->t2) 8312 goto alloc_mem_err; 8313 } 8314 8315 /* write address to which L5 should insert its values */ 8316 bp->cnic_eth_dev.addr_drv_info_to_mcp = 8317 &bp->slowpath->drv_info_to_mcp; 8318 8319 if (bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_ALLOC)) 8320 goto alloc_mem_err; 8321 8322 return 0; 8323 8324alloc_mem_err: 8325 bnx2x_free_mem_cnic(bp); 8326 BNX2X_ERR("Can't allocate memory\n"); 8327 return -ENOMEM; 8328} 8329 8330int bnx2x_alloc_mem(struct bnx2x *bp) 8331{ 8332 int i, allocated, context_size; 8333 8334 if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) { 8335 /* allocate searcher T2 table */ 8336 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); 8337 if (!bp->t2) 8338 goto alloc_mem_err; 8339 } 8340 8341 bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping, 8342 sizeof(struct host_sp_status_block)); 8343 if (!bp->def_status_blk) 8344 goto alloc_mem_err; 8345 8346 bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping, 8347 sizeof(struct bnx2x_slowpath)); 8348 if (!bp->slowpath) 8349 goto alloc_mem_err; 8350 8351 /* Allocate memory for CDU context: 8352 * This memory is allocated separately and not in the generic ILT 8353 * functions because CDU differs in few aspects: 8354 * 1. There are multiple entities allocating memory for context - 8355 * 'regular' driver, CNIC and SRIOV driver. Each separately controls 8356 * its own ILT lines. 8357 * 2. Since CDU page-size is not a single 4KB page (which is the case 8358 * for the other ILT clients), to be efficient we want to support 8359 * allocation of sub-page-size in the last entry. 8360 * 3. Context pointers are used by the driver to pass to FW / update 8361 * the context (for the other ILT clients the pointers are used just to 8362 * free the memory during unload). 8363 */ 8364 context_size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp); 8365 8366 for (i = 0, allocated = 0; allocated < context_size; i++) { 8367 bp->context[i].size = min(CDU_ILT_PAGE_SZ, 8368 (context_size - allocated)); 8369 bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping, 8370 bp->context[i].size); 8371 if (!bp->context[i].vcxt) 8372 goto alloc_mem_err; 8373 allocated += bp->context[i].size; 8374 } 8375 bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line), 8376 GFP_KERNEL); 8377 if (!bp->ilt->lines) 8378 goto alloc_mem_err; 8379 8380 if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC)) 8381 goto alloc_mem_err; 8382 8383 if (bnx2x_iov_alloc_mem(bp)) 8384 goto alloc_mem_err; 8385 8386 /* Slow path ring */ 8387 bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE); 8388 if (!bp->spq) 8389 goto alloc_mem_err; 8390 8391 /* EQ */ 8392 bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping, 8393 BCM_PAGE_SIZE * NUM_EQ_PAGES); 8394 if (!bp->eq_ring) 8395 goto alloc_mem_err; 8396 8397 return 0; 8398 8399alloc_mem_err: 8400 bnx2x_free_mem(bp); 8401 BNX2X_ERR("Can't allocate memory\n"); 8402 return -ENOMEM; 8403} 8404 8405/* 8406 * Init service functions 8407 */ 8408 8409int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, 8410 struct bnx2x_vlan_mac_obj *obj, bool set, 8411 int mac_type, unsigned long *ramrod_flags) 8412{ 8413 int rc; 8414 struct bnx2x_vlan_mac_ramrod_params ramrod_param; 8415 8416 memset(&ramrod_param, 0, sizeof(ramrod_param)); 8417 8418 /* Fill general parameters */ 8419 ramrod_param.vlan_mac_obj = obj; 8420 ramrod_param.ramrod_flags = *ramrod_flags; 8421 8422 /* Fill a user request section if needed */ 8423 if (!test_bit(RAMROD_CONT, ramrod_flags)) { 8424 memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN); 8425 8426 __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags); 8427 8428 /* Set the command: ADD or DEL */ 8429 if (set) 8430 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; 8431 else 8432 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; 8433 } 8434 8435 rc = bnx2x_config_vlan_mac(bp, &ramrod_param); 8436 8437 if (rc == -EEXIST) { 8438 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); 8439 /* do not treat adding same MAC as error */ 8440 rc = 0; 8441 } else if (rc < 0) 8442 BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); 8443 8444 return rc; 8445} 8446 8447int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, 8448 struct bnx2x_vlan_mac_obj *obj, bool set, 8449 unsigned long *ramrod_flags) 8450{ 8451 int rc; 8452 struct bnx2x_vlan_mac_ramrod_params ramrod_param; 8453 8454 memset(&ramrod_param, 0, sizeof(ramrod_param)); 8455 8456 /* Fill general parameters */ 8457 ramrod_param.vlan_mac_obj = obj; 8458 ramrod_param.ramrod_flags = *ramrod_flags; 8459 8460 /* Fill a user request section if needed */ 8461 if (!test_bit(RAMROD_CONT, ramrod_flags)) { 8462 ramrod_param.user_req.u.vlan.vlan = vlan; 8463 /* Set the command: ADD or DEL */ 8464 if (set) 8465 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; 8466 else 8467 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; 8468 } 8469 8470 rc = bnx2x_config_vlan_mac(bp, &ramrod_param); 8471 8472 if (rc == -EEXIST) { 8473 /* Do not treat adding same vlan as error. */ 8474 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); 8475 rc = 0; 8476 } else if (rc < 0) { 8477 BNX2X_ERR("%s VLAN failed\n", (set ? "Set" : "Del")); 8478 } 8479 8480 return rc; 8481} 8482 8483int bnx2x_del_all_macs(struct bnx2x *bp, 8484 struct bnx2x_vlan_mac_obj *mac_obj, 8485 int mac_type, bool wait_for_comp) 8486{ 8487 int rc; 8488 unsigned long ramrod_flags = 0, vlan_mac_flags = 0; 8489 8490 /* Wait for completion of requested */ 8491 if (wait_for_comp) 8492 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 8493 8494 /* Set the mac type of addresses we want to clear */ 8495 __set_bit(mac_type, &vlan_mac_flags); 8496 8497 rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags); 8498 if (rc < 0) 8499 BNX2X_ERR("Failed to delete MACs: %d\n", rc); 8500 8501 return rc; 8502} 8503 8504int bnx2x_set_eth_mac(struct bnx2x *bp, bool set) 8505{ 8506 if (IS_PF(bp)) { 8507 unsigned long ramrod_flags = 0; 8508 8509 DP(NETIF_MSG_IFUP, "Adding Eth MAC\n"); 8510 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 8511 return bnx2x_set_mac_one(bp, bp->dev->dev_addr, 8512 &bp->sp_objs->mac_obj, set, 8513 BNX2X_ETH_MAC, &ramrod_flags); 8514 } else { /* vf */ 8515 return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, 8516 bp->fp->index, set); 8517 } 8518} 8519 8520int bnx2x_setup_leading(struct bnx2x *bp) 8521{ 8522 if (IS_PF(bp)) 8523 return bnx2x_setup_queue(bp, &bp->fp[0], true); 8524 else /* VF */ 8525 return bnx2x_vfpf_setup_q(bp, &bp->fp[0], true); 8526} 8527 8528/** 8529 * bnx2x_set_int_mode - configure interrupt mode 8530 * 8531 * @bp: driver handle 8532 * 8533 * In case of MSI-X it will also try to enable MSI-X. 8534 */ 8535int bnx2x_set_int_mode(struct bnx2x *bp) 8536{ 8537 int rc = 0; 8538 8539 if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) { 8540 BNX2X_ERR("VF not loaded since interrupt mode not msix\n"); 8541 return -EINVAL; 8542 } 8543 8544 switch (int_mode) { 8545 case BNX2X_INT_MODE_MSIX: 8546 /* attempt to enable msix */ 8547 rc = bnx2x_enable_msix(bp); 8548 8549 /* msix attained */ 8550 if (!rc) 8551 return 0; 8552 8553 /* vfs use only msix */ 8554 if (rc && IS_VF(bp)) 8555 return rc; 8556 8557 /* failed to enable multiple MSI-X */ 8558 BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", 8559 bp->num_queues, 8560 1 + bp->num_cnic_queues); 8561 8562 /* falling through... */ 8563 case BNX2X_INT_MODE_MSI: 8564 bnx2x_enable_msi(bp); 8565 8566 /* falling through... */ 8567 case BNX2X_INT_MODE_INTX: 8568 bp->num_ethernet_queues = 1; 8569 bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; 8570 BNX2X_DEV_INFO("set number of queues to 1\n"); 8571 break; 8572 default: 8573 BNX2X_DEV_INFO("unknown value in int_mode module parameter\n"); 8574 return -EINVAL; 8575 } 8576 return 0; 8577} 8578 8579/* must be called prior to any HW initializations */ 8580static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) 8581{ 8582 if (IS_SRIOV(bp)) 8583 return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS; 8584 return L2_ILT_LINES(bp); 8585} 8586 8587void bnx2x_ilt_set_info(struct bnx2x *bp) 8588{ 8589 struct ilt_client_info *ilt_client; 8590 struct bnx2x_ilt *ilt = BP_ILT(bp); 8591 u16 line = 0; 8592 8593 ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp)); 8594 DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line); 8595 8596 /* CDU */ 8597 ilt_client = &ilt->clients[ILT_CLIENT_CDU]; 8598 ilt_client->client_num = ILT_CLIENT_CDU; 8599 ilt_client->page_size = CDU_ILT_PAGE_SZ; 8600 ilt_client->flags = ILT_CLIENT_SKIP_MEM; 8601 ilt_client->start = line; 8602 line += bnx2x_cid_ilt_lines(bp); 8603 8604 if (CNIC_SUPPORT(bp)) 8605 line += CNIC_ILT_LINES; 8606 ilt_client->end = line - 1; 8607 8608 DP(NETIF_MSG_IFUP, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8609 ilt_client->start, 8610 ilt_client->end, 8611 ilt_client->page_size, 8612 ilt_client->flags, 8613 ilog2(ilt_client->page_size >> 12)); 8614 8615 /* QM */ 8616 if (QM_INIT(bp->qm_cid_count)) { 8617 ilt_client = &ilt->clients[ILT_CLIENT_QM]; 8618 ilt_client->client_num = ILT_CLIENT_QM; 8619 ilt_client->page_size = QM_ILT_PAGE_SZ; 8620 ilt_client->flags = 0; 8621 ilt_client->start = line; 8622 8623 /* 4 bytes for each cid */ 8624 line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4, 8625 QM_ILT_PAGE_SZ); 8626 8627 ilt_client->end = line - 1; 8628 8629 DP(NETIF_MSG_IFUP, 8630 "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8631 ilt_client->start, 8632 ilt_client->end, 8633 ilt_client->page_size, 8634 ilt_client->flags, 8635 ilog2(ilt_client->page_size >> 12)); 8636 } 8637 8638 if (CNIC_SUPPORT(bp)) { 8639 /* SRC */ 8640 ilt_client = &ilt->clients[ILT_CLIENT_SRC]; 8641 ilt_client->client_num = ILT_CLIENT_SRC; 8642 ilt_client->page_size = SRC_ILT_PAGE_SZ; 8643 ilt_client->flags = 0; 8644 ilt_client->start = line; 8645 line += SRC_ILT_LINES; 8646 ilt_client->end = line - 1; 8647 8648 DP(NETIF_MSG_IFUP, 8649 "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8650 ilt_client->start, 8651 ilt_client->end, 8652 ilt_client->page_size, 8653 ilt_client->flags, 8654 ilog2(ilt_client->page_size >> 12)); 8655 8656 /* TM */ 8657 ilt_client = &ilt->clients[ILT_CLIENT_TM]; 8658 ilt_client->client_num = ILT_CLIENT_TM; 8659 ilt_client->page_size = TM_ILT_PAGE_SZ; 8660 ilt_client->flags = 0; 8661 ilt_client->start = line; 8662 line += TM_ILT_LINES; 8663 ilt_client->end = line - 1; 8664 8665 DP(NETIF_MSG_IFUP, 8666 "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8667 ilt_client->start, 8668 ilt_client->end, 8669 ilt_client->page_size, 8670 ilt_client->flags, 8671 ilog2(ilt_client->page_size >> 12)); 8672 } 8673 8674 BUG_ON(line > ILT_MAX_LINES); 8675} 8676 8677/** 8678 * bnx2x_pf_q_prep_init - prepare INIT transition parameters 8679 * 8680 * @bp: driver handle 8681 * @fp: pointer to fastpath 8682 * @init_params: pointer to parameters structure 8683 * 8684 * parameters configured: 8685 * - HC configuration 8686 * - Queue's CDU context 8687 */ 8688static void bnx2x_pf_q_prep_init(struct bnx2x *bp, 8689 struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params) 8690{ 8691 u8 cos; 8692 int cxt_index, cxt_offset; 8693 8694 /* FCoE Queue uses Default SB, thus has no HC capabilities */ 8695 if (!IS_FCOE_FP(fp)) { 8696 __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags); 8697 __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags); 8698 8699 /* If HC is supported, enable host coalescing in the transition 8700 * to INIT state. 8701 */ 8702 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags); 8703 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags); 8704 8705 /* HC rate */ 8706 init_params->rx.hc_rate = bp->rx_ticks ? 8707 (1000000 / bp->rx_ticks) : 0; 8708 init_params->tx.hc_rate = bp->tx_ticks ? 8709 (1000000 / bp->tx_ticks) : 0; 8710 8711 /* FW SB ID */ 8712 init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = 8713 fp->fw_sb_id; 8714 8715 /* 8716 * CQ index among the SB indices: FCoE clients uses the default 8717 * SB, therefore it's different. 8718 */ 8719 init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; 8720 init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS; 8721 } 8722 8723 /* set maximum number of COSs supported by this queue */ 8724 init_params->max_cos = fp->max_cos; 8725 8726 DP(NETIF_MSG_IFUP, "fp: %d setting queue params max cos to: %d\n", 8727 fp->index, init_params->max_cos); 8728 8729 /* set the context pointers queue object */ 8730 for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) { 8731 cxt_index = fp->txdata_ptr[cos]->cid / ILT_PAGE_CIDS; 8732 cxt_offset = fp->txdata_ptr[cos]->cid - (cxt_index * 8733 ILT_PAGE_CIDS); 8734 init_params->cxts[cos] = 8735 &bp->context[cxt_index].vcxt[cxt_offset].eth; 8736 } 8737} 8738 8739static int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp, 8740 struct bnx2x_queue_state_params *q_params, 8741 struct bnx2x_queue_setup_tx_only_params *tx_only_params, 8742 int tx_index, bool leading) 8743{ 8744 memset(tx_only_params, 0, sizeof(*tx_only_params)); 8745 8746 /* Set the command */ 8747 q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; 8748 8749 /* Set tx-only QUEUE flags: don't zero statistics */ 8750 tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false); 8751 8752 /* choose the index of the cid to send the slow path on */ 8753 tx_only_params->cid_index = tx_index; 8754 8755 /* Set general TX_ONLY_SETUP parameters */ 8756 bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index); 8757 8758 /* Set Tx TX_ONLY_SETUP parameters */ 8759 bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index); 8760 8761 DP(NETIF_MSG_IFUP, 8762 "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n", 8763 tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX], 8764 q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id, 8765 tx_only_params->gen_params.spcl_id, tx_only_params->flags); 8766 8767 /* send the ramrod */ 8768 return bnx2x_queue_state_change(bp, q_params); 8769} 8770 8771/** 8772 * bnx2x_setup_queue - setup queue 8773 * 8774 * @bp: driver handle 8775 * @fp: pointer to fastpath 8776 * @leading: is leading 8777 * 8778 * This function performs 2 steps in a Queue state machine 8779 * actually: 1) RESET->INIT 2) INIT->SETUP 8780 */ 8781 8782int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, 8783 bool leading) 8784{ 8785 struct bnx2x_queue_state_params q_params = {NULL}; 8786 struct bnx2x_queue_setup_params *setup_params = 8787 &q_params.params.setup; 8788 struct bnx2x_queue_setup_tx_only_params *tx_only_params = 8789 &q_params.params.tx_only; 8790 int rc; 8791 u8 tx_index; 8792 8793 DP(NETIF_MSG_IFUP, "setting up queue %d\n", fp->index); 8794 8795 /* reset IGU state skip FCoE L2 queue */ 8796 if (!IS_FCOE_FP(fp)) 8797 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, 8798 IGU_INT_ENABLE, 0); 8799 8800 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 8801 /* We want to wait for completion in this context */ 8802 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); 8803 8804 /* Prepare the INIT parameters */ 8805 bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init); 8806 8807 /* Set the command */ 8808 q_params.cmd = BNX2X_Q_CMD_INIT; 8809 8810 /* Change the state to INIT */ 8811 rc = bnx2x_queue_state_change(bp, &q_params); 8812 if (rc) { 8813 BNX2X_ERR("Queue(%d) INIT failed\n", fp->index); 8814 return rc; 8815 } 8816 8817 DP(NETIF_MSG_IFUP, "init complete\n"); 8818 8819 /* Now move the Queue to the SETUP state... */ 8820 memset(setup_params, 0, sizeof(*setup_params)); 8821 8822 /* Set QUEUE flags */ 8823 setup_params->flags = bnx2x_get_q_flags(bp, fp, leading); 8824 8825 /* Set general SETUP parameters */ 8826 bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params, 8827 FIRST_TX_COS_INDEX); 8828 8829 bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params, 8830 &setup_params->rxq_params); 8831 8832 bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params, 8833 FIRST_TX_COS_INDEX); 8834 8835 /* Set the command */ 8836 q_params.cmd = BNX2X_Q_CMD_SETUP; 8837 8838 if (IS_FCOE_FP(fp)) 8839 bp->fcoe_init = true; 8840 8841 /* Change the state to SETUP */ 8842 rc = bnx2x_queue_state_change(bp, &q_params); 8843 if (rc) { 8844 BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index); 8845 return rc; 8846 } 8847 8848 /* loop through the relevant tx-only indices */ 8849 for (tx_index = FIRST_TX_ONLY_COS_INDEX; 8850 tx_index < fp->max_cos; 8851 tx_index++) { 8852 8853 /* prepare and send tx-only ramrod*/ 8854 rc = bnx2x_setup_tx_only(bp, fp, &q_params, 8855 tx_only_params, tx_index, leading); 8856 if (rc) { 8857 BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n", 8858 fp->index, tx_index); 8859 return rc; 8860 } 8861 } 8862 8863 return rc; 8864} 8865 8866static int bnx2x_stop_queue(struct bnx2x *bp, int index) 8867{ 8868 struct bnx2x_fastpath *fp = &bp->fp[index]; 8869 struct bnx2x_fp_txdata *txdata; 8870 struct bnx2x_queue_state_params q_params = {NULL}; 8871 int rc, tx_index; 8872 8873 DP(NETIF_MSG_IFDOWN, "stopping queue %d cid %d\n", index, fp->cid); 8874 8875 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 8876 /* We want to wait for completion in this context */ 8877 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); 8878 8879 /* close tx-only connections */ 8880 for (tx_index = FIRST_TX_ONLY_COS_INDEX; 8881 tx_index < fp->max_cos; 8882 tx_index++){ 8883 8884 /* ascertain this is a normal queue*/ 8885 txdata = fp->txdata_ptr[tx_index]; 8886 8887 DP(NETIF_MSG_IFDOWN, "stopping tx-only queue %d\n", 8888 txdata->txq_index); 8889 8890 /* send halt terminate on tx-only connection */ 8891 q_params.cmd = BNX2X_Q_CMD_TERMINATE; 8892 memset(&q_params.params.terminate, 0, 8893 sizeof(q_params.params.terminate)); 8894 q_params.params.terminate.cid_index = tx_index; 8895 8896 rc = bnx2x_queue_state_change(bp, &q_params); 8897 if (rc) 8898 return rc; 8899 8900 /* send halt terminate on tx-only connection */ 8901 q_params.cmd = BNX2X_Q_CMD_CFC_DEL; 8902 memset(&q_params.params.cfc_del, 0, 8903 sizeof(q_params.params.cfc_del)); 8904 q_params.params.cfc_del.cid_index = tx_index; 8905 rc = bnx2x_queue_state_change(bp, &q_params); 8906 if (rc) 8907 return rc; 8908 } 8909 /* Stop the primary connection: */ 8910 /* ...halt the connection */ 8911 q_params.cmd = BNX2X_Q_CMD_HALT; 8912 rc = bnx2x_queue_state_change(bp, &q_params); 8913 if (rc) 8914 return rc; 8915 8916 /* ...terminate the connection */ 8917 q_params.cmd = BNX2X_Q_CMD_TERMINATE; 8918 memset(&q_params.params.terminate, 0, 8919 sizeof(q_params.params.terminate)); 8920 q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX; 8921 rc = bnx2x_queue_state_change(bp, &q_params); 8922 if (rc) 8923 return rc; 8924 /* ...delete cfc entry */ 8925 q_params.cmd = BNX2X_Q_CMD_CFC_DEL; 8926 memset(&q_params.params.cfc_del, 0, 8927 sizeof(q_params.params.cfc_del)); 8928 q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX; 8929 return bnx2x_queue_state_change(bp, &q_params); 8930} 8931 8932static void bnx2x_reset_func(struct bnx2x *bp) 8933{ 8934 int port = BP_PORT(bp); 8935 int func = BP_FUNC(bp); 8936 int i; 8937 8938 /* Disable the function in the FW */ 8939 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0); 8940 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0); 8941 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0); 8942 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0); 8943 8944 /* FP SBs */ 8945 for_each_eth_queue(bp, i) { 8946 struct bnx2x_fastpath *fp = &bp->fp[i]; 8947 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8948 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id), 8949 SB_DISABLED); 8950 } 8951 8952 if (CNIC_LOADED(bp)) 8953 /* CNIC SB */ 8954 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8955 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET 8956 (bnx2x_cnic_fw_sb_id(bp)), SB_DISABLED); 8957 8958 /* SP SB */ 8959 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8960 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), 8961 SB_DISABLED); 8962 8963 for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) 8964 REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), 8965 0); 8966 8967 /* Configure IGU */ 8968 if (bp->common.int_block == INT_BLOCK_HC) { 8969 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); 8970 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); 8971 } else { 8972 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); 8973 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); 8974 } 8975 8976 if (CNIC_LOADED(bp)) { 8977 /* Disable Timer scan */ 8978 REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); 8979 /* 8980 * Wait for at least 10ms and up to 2 second for the timers 8981 * scan to complete 8982 */ 8983 for (i = 0; i < 200; i++) { 8984 usleep_range(10000, 20000); 8985 if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4)) 8986 break; 8987 } 8988 } 8989 /* Clear ILT */ 8990 bnx2x_clear_func_ilt(bp, func); 8991 8992 /* Timers workaround bug for E2: if this is vnic-3, 8993 * we need to set the entire ilt range for this timers. 8994 */ 8995 if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) { 8996 struct ilt_client_info ilt_cli; 8997 /* use dummy TM client */ 8998 memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); 8999 ilt_cli.start = 0; 9000 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; 9001 ilt_cli.client_num = ILT_CLIENT_TM; 9002 9003 bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR); 9004 } 9005 9006 /* this assumes that reset_port() called before reset_func()*/ 9007 if (!CHIP_IS_E1x(bp)) 9008 bnx2x_pf_disable(bp); 9009 9010 bp->dmae_ready = 0; 9011} 9012 9013static void bnx2x_reset_port(struct bnx2x *bp) 9014{ 9015 int port = BP_PORT(bp); 9016 u32 val; 9017 9018 /* Reset physical Link */ 9019 bnx2x__link_reset(bp); 9020 9021 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); 9022 9023 /* Do not rcv packets to BRB */ 9024 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0); 9025 /* Do not direct rcv packets that are not for MCP to the BRB */ 9026 REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : 9027 NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); 9028 9029 /* Configure AEU */ 9030 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0); 9031 9032 msleep(100); 9033 /* Check for BRB port occupancy */ 9034 val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); 9035 if (val) 9036 DP(NETIF_MSG_IFDOWN, 9037 "BRB1 is not empty %d blocks are occupied\n", val); 9038 9039 /* TODO: Close Doorbell port? */ 9040} 9041 9042static int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code) 9043{ 9044 struct bnx2x_func_state_params func_params = {NULL}; 9045 9046 /* Prepare parameters for function state transitions */ 9047 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 9048 9049 func_params.f_obj = &bp->func_obj; 9050 func_params.cmd = BNX2X_F_CMD_HW_RESET; 9051 9052 func_params.params.hw_init.load_phase = load_code; 9053 9054 return bnx2x_func_state_change(bp, &func_params); 9055} 9056 9057static int bnx2x_func_stop(struct bnx2x *bp) 9058{ 9059 struct bnx2x_func_state_params func_params = {NULL}; 9060 int rc; 9061 9062 /* Prepare parameters for function state transitions */ 9063 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 9064 func_params.f_obj = &bp->func_obj; 9065 func_params.cmd = BNX2X_F_CMD_STOP; 9066 9067 /* 9068 * Try to stop the function the 'good way'. If fails (in case 9069 * of a parity error during bnx2x_chip_cleanup()) and we are 9070 * not in a debug mode, perform a state transaction in order to 9071 * enable further HW_RESET transaction. 9072 */ 9073 rc = bnx2x_func_state_change(bp, &func_params); 9074 if (rc) { 9075#ifdef BNX2X_STOP_ON_ERROR 9076 return rc; 9077#else 9078 BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n"); 9079 __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags); 9080 return bnx2x_func_state_change(bp, &func_params); 9081#endif 9082 } 9083 9084 return 0; 9085} 9086 9087/** 9088 * bnx2x_send_unload_req - request unload mode from the MCP. 9089 * 9090 * @bp: driver handle 9091 * @unload_mode: requested function's unload mode 9092 * 9093 * Return unload mode returned by the MCP: COMMON, PORT or FUNC. 9094 */ 9095u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) 9096{ 9097 u32 reset_code = 0; 9098 int port = BP_PORT(bp); 9099 9100 /* Select the UNLOAD request mode */ 9101 if (unload_mode == UNLOAD_NORMAL) 9102 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; 9103 9104 else if (bp->flags & NO_WOL_FLAG) 9105 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; 9106 9107 else if (bp->wol) { 9108 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; 9109 u8 *mac_addr = bp->dev->dev_addr; 9110 struct pci_dev *pdev = bp->pdev; 9111 u32 val; 9112 u16 pmc; 9113 9114 /* The mac address is written to entries 1-4 to 9115 * preserve entry 0 which is used by the PMF 9116 */ 9117 u8 entry = (BP_VN(bp) + 1)*8; 9118 9119 val = (mac_addr[0] << 8) | mac_addr[1]; 9120 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); 9121 9122 val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | 9123 (mac_addr[4] << 8) | mac_addr[5]; 9124 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val); 9125 9126 /* Enable the PME and clear the status */ 9127 pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmc); 9128 pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS; 9129 pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, pmc); 9130 9131 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; 9132 9133 } else 9134 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; 9135 9136 /* Send the request to the MCP */ 9137 if (!BP_NOMCP(bp)) 9138 reset_code = bnx2x_fw_command(bp, reset_code, 0); 9139 else { 9140 int path = BP_PATH(bp); 9141 9142 DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] %d, %d, %d\n", 9143 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], 9144 bnx2x_load_count[path][2]); 9145 bnx2x_load_count[path][0]--; 9146 bnx2x_load_count[path][1 + port]--; 9147 DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] %d, %d, %d\n", 9148 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], 9149 bnx2x_load_count[path][2]); 9150 if (bnx2x_load_count[path][0] == 0) 9151 reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; 9152 else if (bnx2x_load_count[path][1 + port] == 0) 9153 reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT; 9154 else 9155 reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION; 9156 } 9157 9158 return reset_code; 9159} 9160 9161/** 9162 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. 9163 * 9164 * @bp: driver handle 9165 * @keep_link: true iff link should be kept up 9166 */ 9167void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link) 9168{ 9169 u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0; 9170 9171 /* Report UNLOAD_DONE to MCP */ 9172 if (!BP_NOMCP(bp)) 9173 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param); 9174} 9175 9176static int bnx2x_func_wait_started(struct bnx2x *bp) 9177{ 9178 int tout = 50; 9179 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; 9180 9181 if (!bp->port.pmf) 9182 return 0; 9183 9184 /* 9185 * (assumption: No Attention from MCP at this stage) 9186 * PMF probably in the middle of TX disable/enable transaction 9187 * 1. Sync IRS for default SB 9188 * 2. Sync SP queue - this guarantees us that attention handling started 9189 * 3. Wait, that TX disable/enable transaction completes 9190 * 9191 * 1+2 guarantee that if DCBx attention was scheduled it already changed 9192 * pending bit of transaction from STARTED-->TX_STOPPED, if we already 9193 * received completion for the transaction the state is TX_STOPPED. 9194 * State will return to STARTED after completion of TX_STOPPED-->STARTED 9195 * transaction. 9196 */ 9197 9198 /* make sure default SB ISR is done */ 9199 if (msix) 9200 synchronize_irq(bp->msix_table[0].vector); 9201 else 9202 synchronize_irq(bp->pdev->irq); 9203 9204 flush_workqueue(bnx2x_wq); 9205 flush_workqueue(bnx2x_iov_wq); 9206 9207 while (bnx2x_func_get_state(bp, &bp->func_obj) != 9208 BNX2X_F_STATE_STARTED && tout--) 9209 msleep(20); 9210 9211 if (bnx2x_func_get_state(bp, &bp->func_obj) != 9212 BNX2X_F_STATE_STARTED) { 9213#ifdef BNX2X_STOP_ON_ERROR 9214 BNX2X_ERR("Wrong function state\n"); 9215 return -EBUSY; 9216#else 9217 /* 9218 * Failed to complete the transaction in a "good way" 9219 * Force both transactions with CLR bit 9220 */ 9221 struct bnx2x_func_state_params func_params = {NULL}; 9222 9223 DP(NETIF_MSG_IFDOWN, 9224 "Hmmm... Unexpected function state! Forcing STARTED-->TX_STOPPED-->STARTED\n"); 9225 9226 func_params.f_obj = &bp->func_obj; 9227 __set_bit(RAMROD_DRV_CLR_ONLY, 9228 &func_params.ramrod_flags); 9229 9230 /* STARTED-->TX_ST0PPED */ 9231 func_params.cmd = BNX2X_F_CMD_TX_STOP; 9232 bnx2x_func_state_change(bp, &func_params); 9233 9234 /* TX_ST0PPED-->STARTED */ 9235 func_params.cmd = BNX2X_F_CMD_TX_START; 9236 return bnx2x_func_state_change(bp, &func_params); 9237#endif 9238 } 9239 9240 return 0; 9241} 9242 9243static void bnx2x_disable_ptp(struct bnx2x *bp) 9244{ 9245 int port = BP_PORT(bp); 9246 9247 /* Disable sending PTP packets to host */ 9248 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : 9249 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); 9250 9251 /* Reset PTP event detection rules */ 9252 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 9253 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); 9254 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 9255 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); 9256 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : 9257 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); 9258 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : 9259 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); 9260 9261 /* Disable the PTP feature */ 9262 REG_WR(bp, port ? NIG_REG_P1_PTP_EN : 9263 NIG_REG_P0_PTP_EN, 0x0); 9264} 9265 9266/* Called during unload, to stop PTP-related stuff */ 9267static void bnx2x_stop_ptp(struct bnx2x *bp) 9268{ 9269 /* Cancel PTP work queue. Should be done after the Tx queues are 9270 * drained to prevent additional scheduling. 9271 */ 9272 cancel_work_sync(&bp->ptp_task); 9273 9274 if (bp->ptp_tx_skb) { 9275 dev_kfree_skb_any(bp->ptp_tx_skb); 9276 bp->ptp_tx_skb = NULL; 9277 } 9278 9279 /* Disable PTP in HW */ 9280 bnx2x_disable_ptp(bp); 9281 9282 DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n"); 9283} 9284 9285void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) 9286{ 9287 int port = BP_PORT(bp); 9288 int i, rc = 0; 9289 u8 cos; 9290 struct bnx2x_mcast_ramrod_params rparam = {NULL}; 9291 u32 reset_code; 9292 9293 /* Wait until tx fastpath tasks complete */ 9294 for_each_tx_queue(bp, i) { 9295 struct bnx2x_fastpath *fp = &bp->fp[i]; 9296 9297 for_each_cos_in_tx_queue(fp, cos) 9298 rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]); 9299#ifdef BNX2X_STOP_ON_ERROR 9300 if (rc) 9301 return; 9302#endif 9303 } 9304 9305 /* Give HW time to discard old tx messages */ 9306 usleep_range(1000, 2000); 9307 9308 /* Clean all ETH MACs */ 9309 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC, 9310 false); 9311 if (rc < 0) 9312 BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc); 9313 9314 /* Clean up UC list */ 9315 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_UC_LIST_MAC, 9316 true); 9317 if (rc < 0) 9318 BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n", 9319 rc); 9320 9321 /* Disable LLH */ 9322 if (!CHIP_IS_E1(bp)) 9323 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); 9324 9325 /* Set "drop all" (stop Rx). 9326 * We need to take a netif_addr_lock() here in order to prevent 9327 * a race between the completion code and this code. 9328 */ 9329 netif_addr_lock_bh(bp->dev); 9330 /* Schedule the rx_mode command */ 9331 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) 9332 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); 9333 else 9334 bnx2x_set_storm_rx_mode(bp); 9335 9336 /* Cleanup multicast configuration */ 9337 rparam.mcast_obj = &bp->mcast_obj; 9338 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); 9339 if (rc < 0) 9340 BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc); 9341 9342 netif_addr_unlock_bh(bp->dev); 9343 9344 bnx2x_iov_chip_cleanup(bp); 9345 9346 /* 9347 * Send the UNLOAD_REQUEST to the MCP. This will return if 9348 * this function should perform FUNC, PORT or COMMON HW 9349 * reset. 9350 */ 9351 reset_code = bnx2x_send_unload_req(bp, unload_mode); 9352 9353 /* 9354 * (assumption: No Attention from MCP at this stage) 9355 * PMF probably in the middle of TX disable/enable transaction 9356 */ 9357 rc = bnx2x_func_wait_started(bp); 9358 if (rc) { 9359 BNX2X_ERR("bnx2x_func_wait_started failed\n"); 9360#ifdef BNX2X_STOP_ON_ERROR 9361 return; 9362#endif 9363 } 9364 9365 /* Close multi and leading connections 9366 * Completions for ramrods are collected in a synchronous way 9367 */ 9368 for_each_eth_queue(bp, i) 9369 if (bnx2x_stop_queue(bp, i)) 9370#ifdef BNX2X_STOP_ON_ERROR 9371 return; 9372#else 9373 goto unload_error; 9374#endif 9375 9376 if (CNIC_LOADED(bp)) { 9377 for_each_cnic_queue(bp, i) 9378 if (bnx2x_stop_queue(bp, i)) 9379#ifdef BNX2X_STOP_ON_ERROR 9380 return; 9381#else 9382 goto unload_error; 9383#endif 9384 } 9385 9386 /* If SP settings didn't get completed so far - something 9387 * very wrong has happen. 9388 */ 9389 if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) 9390 BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n"); 9391 9392#ifndef BNX2X_STOP_ON_ERROR 9393unload_error: 9394#endif 9395 rc = bnx2x_func_stop(bp); 9396 if (rc) { 9397 BNX2X_ERR("Function stop failed!\n"); 9398#ifdef BNX2X_STOP_ON_ERROR 9399 return; 9400#endif 9401 } 9402 9403 /* stop_ptp should be after the Tx queues are drained to prevent 9404 * scheduling to the cancelled PTP work queue. It should also be after 9405 * function stop ramrod is sent, since as part of this ramrod FW access 9406 * PTP registers. 9407 */ 9408 if (bp->flags & PTP_SUPPORTED) 9409 bnx2x_stop_ptp(bp); 9410 9411 /* Disable HW interrupts, NAPI */ 9412 bnx2x_netif_stop(bp, 1); 9413 /* Delete all NAPI objects */ 9414 bnx2x_del_all_napi(bp); 9415 if (CNIC_LOADED(bp)) 9416 bnx2x_del_all_napi_cnic(bp); 9417 9418 /* Release IRQs */ 9419 bnx2x_free_irq(bp); 9420 9421 /* Reset the chip */ 9422 rc = bnx2x_reset_hw(bp, reset_code); 9423 if (rc) 9424 BNX2X_ERR("HW_RESET failed\n"); 9425 9426 /* Report UNLOAD_DONE to MCP */ 9427 bnx2x_send_unload_done(bp, keep_link); 9428} 9429 9430void bnx2x_disable_close_the_gate(struct bnx2x *bp) 9431{ 9432 u32 val; 9433 9434 DP(NETIF_MSG_IFDOWN, "Disabling \"close the gates\"\n"); 9435 9436 if (CHIP_IS_E1(bp)) { 9437 int port = BP_PORT(bp); 9438 u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : 9439 MISC_REG_AEU_MASK_ATTN_FUNC_0; 9440 9441 val = REG_RD(bp, addr); 9442 val &= ~(0x300); 9443 REG_WR(bp, addr, val); 9444 } else { 9445 val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK); 9446 val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK | 9447 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK); 9448 REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val); 9449 } 9450} 9451 9452/* Close gates #2, #3 and #4: */ 9453static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) 9454{ 9455 u32 val; 9456 9457 /* Gates #2 and #4a are closed/opened for "not E1" only */ 9458 if (!CHIP_IS_E1(bp)) { 9459 /* #4 */ 9460 REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close); 9461 /* #2 */ 9462 REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close); 9463 } 9464 9465 /* #3 */ 9466 if (CHIP_IS_E1x(bp)) { 9467 /* Prevent interrupts from HC on both ports */ 9468 val = REG_RD(bp, HC_REG_CONFIG_1); 9469 REG_WR(bp, HC_REG_CONFIG_1, 9470 (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) : 9471 (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1)); 9472 9473 val = REG_RD(bp, HC_REG_CONFIG_0); 9474 REG_WR(bp, HC_REG_CONFIG_0, 9475 (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : 9476 (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); 9477 } else { 9478 /* Prevent incoming interrupts in IGU */ 9479 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); 9480 9481 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, 9482 (!close) ? 9483 (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) : 9484 (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE)); 9485 } 9486 9487 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "%s gates #2, #3 and #4\n", 9488 close ? "closing" : "opening"); 9489 mmiowb(); 9490} 9491 9492#define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */ 9493 9494static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val) 9495{ 9496 /* Do some magic... */ 9497 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); 9498 *magic_val = val & SHARED_MF_CLP_MAGIC; 9499 MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC); 9500} 9501 9502/** 9503 * bnx2x_clp_reset_done - restore the value of the `magic' bit. 9504 * 9505 * @bp: driver handle 9506 * @magic_val: old value of the `magic' bit. 9507 */ 9508static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val) 9509{ 9510 /* Restore the `magic' bit value... */ 9511 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); 9512 MF_CFG_WR(bp, shared_mf_config.clp_mb, 9513 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val); 9514} 9515 9516/** 9517 * bnx2x_reset_mcp_prep - prepare for MCP reset. 9518 * 9519 * @bp: driver handle 9520 * @magic_val: old value of 'magic' bit. 9521 * 9522 * Takes care of CLP configurations. 9523 */ 9524static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val) 9525{ 9526 u32 shmem; 9527 u32 validity_offset; 9528 9529 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "Starting\n"); 9530 9531 /* Set `magic' bit in order to save MF config */ 9532 if (!CHIP_IS_E1(bp)) 9533 bnx2x_clp_reset_prep(bp, magic_val); 9534 9535 /* Get shmem offset */ 9536 shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); 9537 validity_offset = 9538 offsetof(struct shmem_region, validity_map[BP_PORT(bp)]); 9539 9540 /* Clear validity map flags */ 9541 if (shmem > 0) 9542 REG_WR(bp, shmem + validity_offset, 0); 9543} 9544 9545#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */ 9546#define MCP_ONE_TIMEOUT 100 /* 100 ms */ 9547 9548/** 9549 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT 9550 * 9551 * @bp: driver handle 9552 */ 9553static void bnx2x_mcp_wait_one(struct bnx2x *bp) 9554{ 9555 /* special handling for emulation and FPGA, 9556 wait 10 times longer */ 9557 if (CHIP_REV_IS_SLOW(bp)) 9558 msleep(MCP_ONE_TIMEOUT*10); 9559 else 9560 msleep(MCP_ONE_TIMEOUT); 9561} 9562 9563/* 9564 * initializes bp->common.shmem_base and waits for validity signature to appear 9565 */ 9566static int bnx2x_init_shmem(struct bnx2x *bp) 9567{ 9568 int cnt = 0; 9569 u32 val = 0; 9570 9571 do { 9572 bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); 9573 if (bp->common.shmem_base) { 9574 val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); 9575 if (val & SHR_MEM_VALIDITY_MB) 9576 return 0; 9577 } 9578 9579 bnx2x_mcp_wait_one(bp); 9580 9581 } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT)); 9582 9583 BNX2X_ERR("BAD MCP validity signature\n"); 9584 9585 return -ENODEV; 9586} 9587 9588static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val) 9589{ 9590 int rc = bnx2x_init_shmem(bp); 9591 9592 /* Restore the `magic' bit value */ 9593 if (!CHIP_IS_E1(bp)) 9594 bnx2x_clp_reset_done(bp, magic_val); 9595 9596 return rc; 9597} 9598 9599static void bnx2x_pxp_prep(struct bnx2x *bp) 9600{ 9601 if (!CHIP_IS_E1(bp)) { 9602 REG_WR(bp, PXP2_REG_RD_START_INIT, 0); 9603 REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0); 9604 mmiowb(); 9605 } 9606} 9607 9608/* 9609 * Reset the whole chip except for: 9610 * - PCIE core 9611 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by 9612 * one reset bit) 9613 * - IGU 9614 * - MISC (including AEU) 9615 * - GRC 9616 * - RBCN, RBCP 9617 */ 9618static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global) 9619{ 9620 u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2; 9621 u32 global_bits2, stay_reset2; 9622 9623 /* 9624 * Bits that have to be set in reset_mask2 if we want to reset 'global' 9625 * (per chip) blocks. 9626 */ 9627 global_bits2 = 9628 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU | 9629 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE; 9630 9631 /* Don't reset the following blocks. 9632 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be 9633 * reset, as in 4 port device they might still be owned 9634 * by the MCP (there is only one leader per path). 9635 */ 9636 not_reset_mask1 = 9637 MISC_REGISTERS_RESET_REG_1_RST_HC | 9638 MISC_REGISTERS_RESET_REG_1_RST_PXPV | 9639 MISC_REGISTERS_RESET_REG_1_RST_PXP; 9640 9641 not_reset_mask2 = 9642 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO | 9643 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE | 9644 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE | 9645 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE | 9646 MISC_REGISTERS_RESET_REG_2_RST_RBCN | 9647 MISC_REGISTERS_RESET_REG_2_RST_GRC | 9648 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE | 9649 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B | 9650 MISC_REGISTERS_RESET_REG_2_RST_ATC | 9651 MISC_REGISTERS_RESET_REG_2_PGLC | 9652 MISC_REGISTERS_RESET_REG_2_RST_BMAC0 | 9653 MISC_REGISTERS_RESET_REG_2_RST_BMAC1 | 9654 MISC_REGISTERS_RESET_REG_2_RST_EMAC0 | 9655 MISC_REGISTERS_RESET_REG_2_RST_EMAC1 | 9656 MISC_REGISTERS_RESET_REG_2_UMAC0 | 9657 MISC_REGISTERS_RESET_REG_2_UMAC1; 9658 9659 /* 9660 * Keep the following blocks in reset: 9661 * - all xxMACs are handled by the bnx2x_link code. 9662 */ 9663 stay_reset2 = 9664 MISC_REGISTERS_RESET_REG_2_XMAC | 9665 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT; 9666 9667 /* Full reset masks according to the chip */ 9668 reset_mask1 = 0xffffffff; 9669 9670 if (CHIP_IS_E1(bp)) 9671 reset_mask2 = 0xffff; 9672 else if (CHIP_IS_E1H(bp)) 9673 reset_mask2 = 0x1ffff; 9674 else if (CHIP_IS_E2(bp)) 9675 reset_mask2 = 0xfffff; 9676 else /* CHIP_IS_E3 */ 9677 reset_mask2 = 0x3ffffff; 9678 9679 /* Don't reset global blocks unless we need to */ 9680 if (!global) 9681 reset_mask2 &= ~global_bits2; 9682 9683 /* 9684 * In case of attention in the QM, we need to reset PXP 9685 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM 9686 * because otherwise QM reset would release 'close the gates' shortly 9687 * before resetting the PXP, then the PSWRQ would send a write 9688 * request to PGLUE. Then when PXP is reset, PGLUE would try to 9689 * read the payload data from PSWWR, but PSWWR would not 9690 * respond. The write queue in PGLUE would stuck, dmae commands 9691 * would not return. Therefore it's important to reset the second 9692 * reset register (containing the 9693 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the 9694 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM 9695 * bit). 9696 */ 9697 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 9698 reset_mask2 & (~not_reset_mask2)); 9699 9700 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 9701 reset_mask1 & (~not_reset_mask1)); 9702 9703 barrier(); 9704 mmiowb(); 9705 9706 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 9707 reset_mask2 & (~stay_reset2)); 9708 9709 barrier(); 9710 mmiowb(); 9711 9712 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1); 9713 mmiowb(); 9714} 9715 9716/** 9717 * bnx2x_er_poll_igu_vq - poll for pending writes bit. 9718 * It should get cleared in no more than 1s. 9719 * 9720 * @bp: driver handle 9721 * 9722 * It should get cleared in no more than 1s. Returns 0 if 9723 * pending writes bit gets cleared. 9724 */ 9725static int bnx2x_er_poll_igu_vq(struct bnx2x *bp) 9726{ 9727 u32 cnt = 1000; 9728 u32 pend_bits = 0; 9729 9730 do { 9731 pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS); 9732 9733 if (pend_bits == 0) 9734 break; 9735 9736 usleep_range(1000, 2000); 9737 } while (cnt-- > 0); 9738 9739 if (cnt <= 0) { 9740 BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n", 9741 pend_bits); 9742 return -EBUSY; 9743 } 9744 9745 return 0; 9746} 9747 9748static int bnx2x_process_kill(struct bnx2x *bp, bool global) 9749{ 9750 int cnt = 1000; 9751 u32 val = 0; 9752 u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2; 9753 u32 tags_63_32 = 0; 9754 9755 /* Empty the Tetris buffer, wait for 1s */ 9756 do { 9757 sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT); 9758 blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT); 9759 port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0); 9760 port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1); 9761 pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2); 9762 if (CHIP_IS_E3(bp)) 9763 tags_63_32 = REG_RD(bp, PGLUE_B_REG_TAGS_63_32); 9764 9765 if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) && 9766 ((port_is_idle_0 & 0x1) == 0x1) && 9767 ((port_is_idle_1 & 0x1) == 0x1) && 9768 (pgl_exp_rom2 == 0xffffffff) && 9769 (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff))) 9770 break; 9771 usleep_range(1000, 2000); 9772 } while (cnt-- > 0); 9773 9774 if (cnt <= 0) { 9775 BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n"); 9776 BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n", 9777 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, 9778 pgl_exp_rom2); 9779 return -EAGAIN; 9780 } 9781 9782 barrier(); 9783 9784 /* Close gates #2, #3 and #4 */ 9785 bnx2x_set_234_gates(bp, true); 9786 9787 /* Poll for IGU VQs for 57712 and newer chips */ 9788 if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp)) 9789 return -EAGAIN; 9790 9791 /* TBD: Indicate that "process kill" is in progress to MCP */ 9792 9793 /* Clear "unprepared" bit */ 9794 REG_WR(bp, MISC_REG_UNPREPARED, 0); 9795 barrier(); 9796 9797 /* Make sure all is written to the chip before the reset */ 9798 mmiowb(); 9799 9800 /* Wait for 1ms to empty GLUE and PCI-E core queues, 9801 * PSWHST, GRC and PSWRD Tetris buffer. 9802 */ 9803 usleep_range(1000, 2000); 9804 9805 /* Prepare to chip reset: */ 9806 /* MCP */ 9807 if (global) 9808 bnx2x_reset_mcp_prep(bp, &val); 9809 9810 /* PXP */ 9811 bnx2x_pxp_prep(bp); 9812 barrier(); 9813 9814 /* reset the chip */ 9815 bnx2x_process_kill_chip_reset(bp, global); 9816 barrier(); 9817 9818 /* clear errors in PGB */ 9819 if (!CHIP_IS_E1x(bp)) 9820 REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f); 9821 9822 /* Recover after reset: */ 9823 /* MCP */ 9824 if (global && bnx2x_reset_mcp_comp(bp, val)) 9825 return -EAGAIN; 9826 9827 /* TBD: Add resetting the NO_MCP mode DB here */ 9828 9829 /* Open the gates #2, #3 and #4 */ 9830 bnx2x_set_234_gates(bp, false); 9831 9832 /* TBD: IGU/AEU preparation bring back the AEU/IGU to a 9833 * reset state, re-enable attentions. */ 9834 9835 return 0; 9836} 9837 9838static int bnx2x_leader_reset(struct bnx2x *bp) 9839{ 9840 int rc = 0; 9841 bool global = bnx2x_reset_is_global(bp); 9842 u32 load_code; 9843 9844 /* if not going to reset MCP - load "fake" driver to reset HW while 9845 * driver is owner of the HW 9846 */ 9847 if (!global && !BP_NOMCP(bp)) { 9848 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 9849 DRV_MSG_CODE_LOAD_REQ_WITH_LFA); 9850 if (!load_code) { 9851 BNX2X_ERR("MCP response failure, aborting\n"); 9852 rc = -EAGAIN; 9853 goto exit_leader_reset; 9854 } 9855 if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) && 9856 (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) { 9857 BNX2X_ERR("MCP unexpected resp, aborting\n"); 9858 rc = -EAGAIN; 9859 goto exit_leader_reset2; 9860 } 9861 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); 9862 if (!load_code) { 9863 BNX2X_ERR("MCP response failure, aborting\n"); 9864 rc = -EAGAIN; 9865 goto exit_leader_reset2; 9866 } 9867 } 9868 9869 /* Try to recover after the failure */ 9870 if (bnx2x_process_kill(bp, global)) { 9871 BNX2X_ERR("Something bad had happen on engine %d! Aii!\n", 9872 BP_PATH(bp)); 9873 rc = -EAGAIN; 9874 goto exit_leader_reset2; 9875 } 9876 9877 /* 9878 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver 9879 * state. 9880 */ 9881 bnx2x_set_reset_done(bp); 9882 if (global) 9883 bnx2x_clear_reset_global(bp); 9884 9885exit_leader_reset2: 9886 /* unload "fake driver" if it was loaded */ 9887 if (!global && !BP_NOMCP(bp)) { 9888 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); 9889 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); 9890 } 9891exit_leader_reset: 9892 bp->is_leader = 0; 9893 bnx2x_release_leader_lock(bp); 9894 smp_mb(); 9895 return rc; 9896} 9897 9898static void bnx2x_recovery_failed(struct bnx2x *bp) 9899{ 9900 netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n"); 9901 9902 /* Disconnect this device */ 9903 netif_device_detach(bp->dev); 9904 9905 /* 9906 * Block ifup for all function on this engine until "process kill" 9907 * or power cycle. 9908 */ 9909 bnx2x_set_reset_in_progress(bp); 9910 9911 /* Shut down the power */ 9912 bnx2x_set_power_state(bp, PCI_D3hot); 9913 9914 bp->recovery_state = BNX2X_RECOVERY_FAILED; 9915 9916 smp_mb(); 9917} 9918 9919/* 9920 * Assumption: runs under rtnl lock. This together with the fact 9921 * that it's called only from bnx2x_sp_rtnl() ensure that it 9922 * will never be called when netif_running(bp->dev) is false. 9923 */ 9924static void bnx2x_parity_recover(struct bnx2x *bp) 9925{ 9926 bool global = false; 9927 u32 error_recovered, error_unrecovered; 9928 bool is_parity; 9929 9930 DP(NETIF_MSG_HW, "Handling parity\n"); 9931 while (1) { 9932 switch (bp->recovery_state) { 9933 case BNX2X_RECOVERY_INIT: 9934 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n"); 9935 is_parity = bnx2x_chk_parity_attn(bp, &global, false); 9936 WARN_ON(!is_parity); 9937 9938 /* Try to get a LEADER_LOCK HW lock */ 9939 if (bnx2x_trylock_leader_lock(bp)) { 9940 bnx2x_set_reset_in_progress(bp); 9941 /* 9942 * Check if there is a global attention and if 9943 * there was a global attention, set the global 9944 * reset bit. 9945 */ 9946 9947 if (global) 9948 bnx2x_set_reset_global(bp); 9949 9950 bp->is_leader = 1; 9951 } 9952 9953 /* Stop the driver */ 9954 /* If interface has been removed - break */ 9955 if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false)) 9956 return; 9957 9958 bp->recovery_state = BNX2X_RECOVERY_WAIT; 9959 9960 /* Ensure "is_leader", MCP command sequence and 9961 * "recovery_state" update values are seen on other 9962 * CPUs. 9963 */ 9964 smp_mb(); 9965 break; 9966 9967 case BNX2X_RECOVERY_WAIT: 9968 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n"); 9969 if (bp->is_leader) { 9970 int other_engine = BP_PATH(bp) ? 0 : 1; 9971 bool other_load_status = 9972 bnx2x_get_load_status(bp, other_engine); 9973 bool load_status = 9974 bnx2x_get_load_status(bp, BP_PATH(bp)); 9975 global = bnx2x_reset_is_global(bp); 9976 9977 /* 9978 * In case of a parity in a global block, let 9979 * the first leader that performs a 9980 * leader_reset() reset the global blocks in 9981 * order to clear global attentions. Otherwise 9982 * the gates will remain closed for that 9983 * engine. 9984 */ 9985 if (load_status || 9986 (global && other_load_status)) { 9987 /* Wait until all other functions get 9988 * down. 9989 */ 9990 schedule_delayed_work(&bp->sp_rtnl_task, 9991 HZ/10); 9992 return; 9993 } else { 9994 /* If all other functions got down - 9995 * try to bring the chip back to 9996 * normal. In any case it's an exit 9997 * point for a leader. 9998 */ 9999 if (bnx2x_leader_reset(bp)) { 10000 bnx2x_recovery_failed(bp); 10001 return; 10002 } 10003 10004 /* If we are here, means that the 10005 * leader has succeeded and doesn't 10006 * want to be a leader any more. Try 10007 * to continue as a none-leader. 10008 */ 10009 break; 10010 } 10011 } else { /* non-leader */ 10012 if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) { 10013 /* Try to get a LEADER_LOCK HW lock as 10014 * long as a former leader may have 10015 * been unloaded by the user or 10016 * released a leadership by another 10017 * reason. 10018 */ 10019 if (bnx2x_trylock_leader_lock(bp)) { 10020 /* I'm a leader now! Restart a 10021 * switch case. 10022 */ 10023 bp->is_leader = 1; 10024 break; 10025 } 10026 10027 schedule_delayed_work(&bp->sp_rtnl_task, 10028 HZ/10); 10029 return; 10030 10031 } else { 10032 /* 10033 * If there was a global attention, wait 10034 * for it to be cleared. 10035 */ 10036 if (bnx2x_reset_is_global(bp)) { 10037 schedule_delayed_work( 10038 &bp->sp_rtnl_task, 10039 HZ/10); 10040 return; 10041 } 10042 10043 error_recovered = 10044 bp->eth_stats.recoverable_error; 10045 error_unrecovered = 10046 bp->eth_stats.unrecoverable_error; 10047 bp->recovery_state = 10048 BNX2X_RECOVERY_NIC_LOADING; 10049 if (bnx2x_nic_load(bp, LOAD_NORMAL)) { 10050 error_unrecovered++; 10051 netdev_err(bp->dev, 10052 "Recovery failed. Power cycle needed\n"); 10053 /* Disconnect this device */ 10054 netif_device_detach(bp->dev); 10055 /* Shut down the power */ 10056 bnx2x_set_power_state( 10057 bp, PCI_D3hot); 10058 smp_mb(); 10059 } else { 10060 bp->recovery_state = 10061 BNX2X_RECOVERY_DONE; 10062 error_recovered++; 10063 smp_mb(); 10064 } 10065 bp->eth_stats.recoverable_error = 10066 error_recovered; 10067 bp->eth_stats.unrecoverable_error = 10068 error_unrecovered; 10069 10070 return; 10071 } 10072 } 10073 default: 10074 return; 10075 } 10076 } 10077} 10078 10079#ifdef CONFIG_BNX2X_VXLAN 10080static int bnx2x_vxlan_port_update(struct bnx2x *bp, u16 port) 10081{ 10082 struct bnx2x_func_switch_update_params *switch_update_params; 10083 struct bnx2x_func_state_params func_params = {NULL}; 10084 int rc; 10085 10086 switch_update_params = &func_params.params.switch_update; 10087 10088 /* Prepare parameters for function state transitions */ 10089 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 10090 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 10091 10092 func_params.f_obj = &bp->func_obj; 10093 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; 10094 10095 /* Function parameters */ 10096 __set_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG, 10097 &switch_update_params->changes); 10098 switch_update_params->vxlan_dst_port = port; 10099 rc = bnx2x_func_state_change(bp, &func_params); 10100 if (rc) 10101 BNX2X_ERR("failed to change vxlan dst port to %d (rc = 0x%x)\n", 10102 port, rc); 10103 return rc; 10104} 10105 10106static void __bnx2x_add_vxlan_port(struct bnx2x *bp, u16 port) 10107{ 10108 if (!netif_running(bp->dev)) 10109 return; 10110 10111 if (bp->vxlan_dst_port_count && bp->vxlan_dst_port == port) { 10112 bp->vxlan_dst_port_count++; 10113 return; 10114 } 10115 10116 if (bp->vxlan_dst_port_count || !IS_PF(bp)) { 10117 DP(BNX2X_MSG_SP, "Vxlan destination port limit reached\n"); 10118 return; 10119 } 10120 10121 bp->vxlan_dst_port = port; 10122 bp->vxlan_dst_port_count = 1; 10123 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_ADD_VXLAN_PORT, 0); 10124} 10125 10126static void bnx2x_add_vxlan_port(struct net_device *netdev, 10127 sa_family_t sa_family, __be16 port) 10128{ 10129 struct bnx2x *bp = netdev_priv(netdev); 10130 u16 t_port = ntohs(port); 10131 10132 __bnx2x_add_vxlan_port(bp, t_port); 10133} 10134 10135static void __bnx2x_del_vxlan_port(struct bnx2x *bp, u16 port) 10136{ 10137 if (!bp->vxlan_dst_port_count || bp->vxlan_dst_port != port || 10138 !IS_PF(bp)) { 10139 DP(BNX2X_MSG_SP, "Invalid vxlan port\n"); 10140 return; 10141 } 10142 bp->vxlan_dst_port_count--; 10143 if (bp->vxlan_dst_port_count) 10144 return; 10145 10146 if (netif_running(bp->dev)) { 10147 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_DEL_VXLAN_PORT, 0); 10148 } else { 10149 bp->vxlan_dst_port = 0; 10150 netdev_info(bp->dev, "Deleted vxlan dest port %d", port); 10151 } 10152} 10153 10154static void bnx2x_del_vxlan_port(struct net_device *netdev, 10155 sa_family_t sa_family, __be16 port) 10156{ 10157 struct bnx2x *bp = netdev_priv(netdev); 10158 u16 t_port = ntohs(port); 10159 10160 __bnx2x_del_vxlan_port(bp, t_port); 10161} 10162#endif 10163 10164static int bnx2x_close(struct net_device *dev); 10165 10166/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is 10167 * scheduled on a general queue in order to prevent a dead lock. 10168 */ 10169static void bnx2x_sp_rtnl_task(struct work_struct *work) 10170{ 10171 struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work); 10172#ifdef CONFIG_BNX2X_VXLAN 10173 u16 port; 10174#endif 10175 10176 rtnl_lock(); 10177 10178 if (!netif_running(bp->dev)) { 10179 rtnl_unlock(); 10180 return; 10181 } 10182 10183 if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) { 10184#ifdef BNX2X_STOP_ON_ERROR 10185 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" 10186 "you will need to reboot when done\n"); 10187 goto sp_rtnl_not_reset; 10188#endif 10189 /* 10190 * Clear all pending SP commands as we are going to reset the 10191 * function anyway. 10192 */ 10193 bp->sp_rtnl_state = 0; 10194 smp_mb(); 10195 10196 bnx2x_parity_recover(bp); 10197 10198 rtnl_unlock(); 10199 return; 10200 } 10201 10202 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) { 10203#ifdef BNX2X_STOP_ON_ERROR 10204 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" 10205 "you will need to reboot when done\n"); 10206 goto sp_rtnl_not_reset; 10207#endif 10208 10209 /* 10210 * Clear all pending SP commands as we are going to reset the 10211 * function anyway. 10212 */ 10213 bp->sp_rtnl_state = 0; 10214 smp_mb(); 10215 10216 bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); 10217 bnx2x_nic_load(bp, LOAD_NORMAL); 10218 10219 rtnl_unlock(); 10220 return; 10221 } 10222#ifdef BNX2X_STOP_ON_ERROR 10223sp_rtnl_not_reset: 10224#endif 10225 if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state)) 10226 bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos); 10227 if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE, &bp->sp_rtnl_state)) 10228 bnx2x_after_function_update(bp); 10229 /* 10230 * in case of fan failure we need to reset id if the "stop on error" 10231 * debug flag is set, since we trying to prevent permanent overheating 10232 * damage 10233 */ 10234 if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) { 10235 DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n"); 10236 netif_device_detach(bp->dev); 10237 bnx2x_close(bp->dev); 10238 rtnl_unlock(); 10239 return; 10240 } 10241 10242 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) { 10243 DP(BNX2X_MSG_SP, 10244 "sending set mcast vf pf channel message from rtnl sp-task\n"); 10245 bnx2x_vfpf_set_mcast(bp->dev); 10246 } 10247 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, 10248 &bp->sp_rtnl_state)){ 10249 if (!test_bit(__LINK_STATE_NOCARRIER, &bp->dev->state)) { 10250 bnx2x_tx_disable(bp); 10251 BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n"); 10252 } 10253 } 10254 10255 if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state)) { 10256 DP(BNX2X_MSG_SP, "Handling Rx Mode setting\n"); 10257 bnx2x_set_rx_mode_inner(bp); 10258 } 10259 10260 if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN, 10261 &bp->sp_rtnl_state)) 10262 bnx2x_pf_set_vfs_vlan(bp); 10263 10264 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) { 10265 bnx2x_dcbx_stop_hw_tx(bp); 10266 bnx2x_dcbx_resume_hw_tx(bp); 10267 } 10268 10269 if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION, 10270 &bp->sp_rtnl_state)) 10271 bnx2x_update_mng_version(bp); 10272 10273#ifdef CONFIG_BNX2X_VXLAN 10274 port = bp->vxlan_dst_port; 10275 if (test_and_clear_bit(BNX2X_SP_RTNL_ADD_VXLAN_PORT, 10276 &bp->sp_rtnl_state)) { 10277 if (!bnx2x_vxlan_port_update(bp, port)) 10278 netdev_info(bp->dev, "Added vxlan dest port %d", port); 10279 else 10280 bp->vxlan_dst_port = 0; 10281 } 10282 10283 if (test_and_clear_bit(BNX2X_SP_RTNL_DEL_VXLAN_PORT, 10284 &bp->sp_rtnl_state)) { 10285 if (!bnx2x_vxlan_port_update(bp, 0)) { 10286 netdev_info(bp->dev, 10287 "Deleted vxlan dest port %d", port); 10288 bp->vxlan_dst_port = 0; 10289 vxlan_get_rx_port(bp->dev); 10290 } 10291 } 10292#endif 10293 10294 /* work which needs rtnl lock not-taken (as it takes the lock itself and 10295 * can be called from other contexts as well) 10296 */ 10297 rtnl_unlock(); 10298 10299 /* enable SR-IOV if applicable */ 10300 if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, 10301 &bp->sp_rtnl_state)) { 10302 bnx2x_disable_sriov(bp); 10303 bnx2x_enable_sriov(bp); 10304 } 10305} 10306 10307static void bnx2x_period_task(struct work_struct *work) 10308{ 10309 struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work); 10310 10311 if (!netif_running(bp->dev)) 10312 goto period_task_exit; 10313 10314 if (CHIP_REV_IS_SLOW(bp)) { 10315 BNX2X_ERR("period task called on emulation, ignoring\n"); 10316 goto period_task_exit; 10317 } 10318 10319 bnx2x_acquire_phy_lock(bp); 10320 /* 10321 * The barrier is needed to ensure the ordering between the writing to 10322 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and 10323 * the reading here. 10324 */ 10325 smp_mb(); 10326 if (bp->port.pmf) { 10327 bnx2x_period_func(&bp->link_params, &bp->link_vars); 10328 10329 /* Re-queue task in 1 sec */ 10330 queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ); 10331 } 10332 10333 bnx2x_release_phy_lock(bp); 10334period_task_exit: 10335 return; 10336} 10337 10338/* 10339 * Init service functions 10340 */ 10341 10342static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) 10343{ 10344 u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0; 10345 u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base; 10346 return base + (BP_ABS_FUNC(bp)) * stride; 10347} 10348 10349static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp, 10350 u8 port, u32 reset_reg, 10351 struct bnx2x_mac_vals *vals) 10352{ 10353 u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; 10354 u32 base_addr; 10355 10356 if (!(mask & reset_reg)) 10357 return false; 10358 10359 BNX2X_DEV_INFO("Disable umac Rx %02x\n", port); 10360 base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; 10361 vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG; 10362 vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]); 10363 REG_WR(bp, vals->umac_addr[port], 0); 10364 10365 return true; 10366} 10367 10368static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, 10369 struct bnx2x_mac_vals *vals) 10370{ 10371 u32 val, base_addr, offset, mask, reset_reg; 10372 bool mac_stopped = false; 10373 u8 port = BP_PORT(bp); 10374 10375 /* reset addresses as they also mark which values were changed */ 10376 memset(vals, 0, sizeof(*vals)); 10377 10378 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); 10379 10380 if (!CHIP_IS_E3(bp)) { 10381 val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4); 10382 mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port; 10383 if ((mask & reset_reg) && val) { 10384 u32 wb_data[2]; 10385 BNX2X_DEV_INFO("Disable bmac Rx\n"); 10386 base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM 10387 : NIG_REG_INGRESS_BMAC0_MEM; 10388 offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL 10389 : BIGMAC_REGISTER_BMAC_CONTROL; 10390 10391 /* 10392 * use rd/wr since we cannot use dmae. This is safe 10393 * since MCP won't access the bus due to the request 10394 * to unload, and no function on the path can be 10395 * loaded at this time. 10396 */ 10397 wb_data[0] = REG_RD(bp, base_addr + offset); 10398 wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); 10399 vals->bmac_addr = base_addr + offset; 10400 vals->bmac_val[0] = wb_data[0]; 10401 vals->bmac_val[1] = wb_data[1]; 10402 wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; 10403 REG_WR(bp, vals->bmac_addr, wb_data[0]); 10404 REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); 10405 } 10406 BNX2X_DEV_INFO("Disable emac Rx\n"); 10407 vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; 10408 vals->emac_val = REG_RD(bp, vals->emac_addr); 10409 REG_WR(bp, vals->emac_addr, 0); 10410 mac_stopped = true; 10411 } else { 10412 if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { 10413 BNX2X_DEV_INFO("Disable xmac Rx\n"); 10414 base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; 10415 val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI); 10416 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, 10417 val & ~(1 << 1)); 10418 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, 10419 val | (1 << 1)); 10420 vals->xmac_addr = base_addr + XMAC_REG_CTRL; 10421 vals->xmac_val = REG_RD(bp, vals->xmac_addr); 10422 REG_WR(bp, vals->xmac_addr, 0); 10423 mac_stopped = true; 10424 } 10425 10426 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0, 10427 reset_reg, vals); 10428 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1, 10429 reset_reg, vals); 10430 } 10431 10432 if (mac_stopped) 10433 msleep(20); 10434} 10435 10436#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4)) 10437#define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \ 10438 0x1848 + ((f) << 4)) 10439#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff) 10440#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff) 10441#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq)) 10442 10443#define BCM_5710_UNDI_FW_MF_MAJOR (0x07) 10444#define BCM_5710_UNDI_FW_MF_MINOR (0x08) 10445#define BCM_5710_UNDI_FW_MF_VERS (0x05) 10446 10447static bool bnx2x_prev_is_after_undi(struct bnx2x *bp) 10448{ 10449 /* UNDI marks its presence in DORQ - 10450 * it initializes CID offset for normal bell to 0x7 10451 */ 10452 if (!(REG_RD(bp, MISC_REG_RESET_REG_1) & 10453 MISC_REGISTERS_RESET_REG_1_RST_DORQ)) 10454 return false; 10455 10456 if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) { 10457 BNX2X_DEV_INFO("UNDI previously loaded\n"); 10458 return true; 10459 } 10460 10461 return false; 10462} 10463 10464static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc) 10465{ 10466 u16 rcq, bd; 10467 u32 addr, tmp_reg; 10468 10469 if (BP_FUNC(bp) < 2) 10470 addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp)); 10471 else 10472 addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2); 10473 10474 tmp_reg = REG_RD(bp, addr); 10475 rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc; 10476 bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc; 10477 10478 tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd); 10479 REG_WR(bp, addr, tmp_reg); 10480 10481 BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n", 10482 BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq); 10483} 10484 10485static int bnx2x_prev_mcp_done(struct bnx2x *bp) 10486{ 10487 u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 10488 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET); 10489 if (!rc) { 10490 BNX2X_ERR("MCP response failure, aborting\n"); 10491 return -EBUSY; 10492 } 10493 10494 return 0; 10495} 10496 10497static struct bnx2x_prev_path_list * 10498 bnx2x_prev_path_get_entry(struct bnx2x *bp) 10499{ 10500 struct bnx2x_prev_path_list *tmp_list; 10501 10502 list_for_each_entry(tmp_list, &bnx2x_prev_list, list) 10503 if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot && 10504 bp->pdev->bus->number == tmp_list->bus && 10505 BP_PATH(bp) == tmp_list->path) 10506 return tmp_list; 10507 10508 return NULL; 10509} 10510 10511static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp) 10512{ 10513 struct bnx2x_prev_path_list *tmp_list; 10514 int rc; 10515 10516 rc = down_interruptible(&bnx2x_prev_sem); 10517 if (rc) { 10518 BNX2X_ERR("Received %d when tried to take lock\n", rc); 10519 return rc; 10520 } 10521 10522 tmp_list = bnx2x_prev_path_get_entry(bp); 10523 if (tmp_list) { 10524 tmp_list->aer = 1; 10525 rc = 0; 10526 } else { 10527 BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n", 10528 BP_PATH(bp)); 10529 } 10530 10531 up(&bnx2x_prev_sem); 10532 10533 return rc; 10534} 10535 10536static bool bnx2x_prev_is_path_marked(struct bnx2x *bp) 10537{ 10538 struct bnx2x_prev_path_list *tmp_list; 10539 bool rc = false; 10540 10541 if (down_trylock(&bnx2x_prev_sem)) 10542 return false; 10543 10544 tmp_list = bnx2x_prev_path_get_entry(bp); 10545 if (tmp_list) { 10546 if (tmp_list->aer) { 10547 DP(NETIF_MSG_HW, "Path %d was marked by AER\n", 10548 BP_PATH(bp)); 10549 } else { 10550 rc = true; 10551 BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n", 10552 BP_PATH(bp)); 10553 } 10554 } 10555 10556 up(&bnx2x_prev_sem); 10557 10558 return rc; 10559} 10560 10561bool bnx2x_port_after_undi(struct bnx2x *bp) 10562{ 10563 struct bnx2x_prev_path_list *entry; 10564 bool val; 10565 10566 down(&bnx2x_prev_sem); 10567 10568 entry = bnx2x_prev_path_get_entry(bp); 10569 val = !!(entry && (entry->undi & (1 << BP_PORT(bp)))); 10570 10571 up(&bnx2x_prev_sem); 10572 10573 return val; 10574} 10575 10576static int bnx2x_prev_mark_path(struct bnx2x *bp, bool after_undi) 10577{ 10578 struct bnx2x_prev_path_list *tmp_list; 10579 int rc; 10580 10581 rc = down_interruptible(&bnx2x_prev_sem); 10582 if (rc) { 10583 BNX2X_ERR("Received %d when tried to take lock\n", rc); 10584 return rc; 10585 } 10586 10587 /* Check whether the entry for this path already exists */ 10588 tmp_list = bnx2x_prev_path_get_entry(bp); 10589 if (tmp_list) { 10590 if (!tmp_list->aer) { 10591 BNX2X_ERR("Re-Marking the path.\n"); 10592 } else { 10593 DP(NETIF_MSG_HW, "Removing AER indication from path %d\n", 10594 BP_PATH(bp)); 10595 tmp_list->aer = 0; 10596 } 10597 up(&bnx2x_prev_sem); 10598 return 0; 10599 } 10600 up(&bnx2x_prev_sem); 10601 10602 /* Create an entry for this path and add it */ 10603 tmp_list = kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL); 10604 if (!tmp_list) { 10605 BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n"); 10606 return -ENOMEM; 10607 } 10608 10609 tmp_list->bus = bp->pdev->bus->number; 10610 tmp_list->slot = PCI_SLOT(bp->pdev->devfn); 10611 tmp_list->path = BP_PATH(bp); 10612 tmp_list->aer = 0; 10613 tmp_list->undi = after_undi ? (1 << BP_PORT(bp)) : 0; 10614 10615 rc = down_interruptible(&bnx2x_prev_sem); 10616 if (rc) { 10617 BNX2X_ERR("Received %d when tried to take lock\n", rc); 10618 kfree(tmp_list); 10619 } else { 10620 DP(NETIF_MSG_HW, "Marked path [%d] - finished previous unload\n", 10621 BP_PATH(bp)); 10622 list_add(&tmp_list->list, &bnx2x_prev_list); 10623 up(&bnx2x_prev_sem); 10624 } 10625 10626 return rc; 10627} 10628 10629static int bnx2x_do_flr(struct bnx2x *bp) 10630{ 10631 struct pci_dev *dev = bp->pdev; 10632 10633 if (CHIP_IS_E1x(bp)) { 10634 BNX2X_DEV_INFO("FLR not supported in E1/E1H\n"); 10635 return -EINVAL; 10636 } 10637 10638 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */ 10639 if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { 10640 BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", 10641 bp->common.bc_ver); 10642 return -EINVAL; 10643 } 10644 10645 if (!pci_wait_for_pending_transaction(dev)) 10646 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 10647 10648 BNX2X_DEV_INFO("Initiating FLR\n"); 10649 bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); 10650 10651 return 0; 10652} 10653 10654static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) 10655{ 10656 int rc; 10657 10658 BNX2X_DEV_INFO("Uncommon unload Flow\n"); 10659 10660 /* Test if previous unload process was already finished for this path */ 10661 if (bnx2x_prev_is_path_marked(bp)) 10662 return bnx2x_prev_mcp_done(bp); 10663 10664 BNX2X_DEV_INFO("Path is unmarked\n"); 10665 10666 /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */ 10667 if (bnx2x_prev_is_after_undi(bp)) 10668 goto out; 10669 10670 /* If function has FLR capabilities, and existing FW version matches 10671 * the one required, then FLR will be sufficient to clean any residue 10672 * left by previous driver 10673 */ 10674 rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false); 10675 10676 if (!rc) { 10677 /* fw version is good */ 10678 BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n"); 10679 rc = bnx2x_do_flr(bp); 10680 } 10681 10682 if (!rc) { 10683 /* FLR was performed */ 10684 BNX2X_DEV_INFO("FLR successful\n"); 10685 return 0; 10686 } 10687 10688 BNX2X_DEV_INFO("Could not FLR\n"); 10689 10690out: 10691 /* Close the MCP request, return failure*/ 10692 rc = bnx2x_prev_mcp_done(bp); 10693 if (!rc) 10694 rc = BNX2X_PREV_WAIT_NEEDED; 10695 10696 return rc; 10697} 10698 10699static int bnx2x_prev_unload_common(struct bnx2x *bp) 10700{ 10701 u32 reset_reg, tmp_reg = 0, rc; 10702 bool prev_undi = false; 10703 struct bnx2x_mac_vals mac_vals; 10704 10705 /* It is possible a previous function received 'common' answer, 10706 * but hasn't loaded yet, therefore creating a scenario of 10707 * multiple functions receiving 'common' on the same path. 10708 */ 10709 BNX2X_DEV_INFO("Common unload Flow\n"); 10710 10711 memset(&mac_vals, 0, sizeof(mac_vals)); 10712 10713 if (bnx2x_prev_is_path_marked(bp)) 10714 return bnx2x_prev_mcp_done(bp); 10715 10716 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); 10717 10718 /* Reset should be performed after BRB is emptied */ 10719 if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) { 10720 u32 timer_count = 1000; 10721 10722 /* Close the MAC Rx to prevent BRB from filling up */ 10723 bnx2x_prev_unload_close_mac(bp, &mac_vals); 10724 10725 /* close LLH filters for both ports towards the BRB */ 10726 bnx2x_set_rx_filter(&bp->link_params, 0); 10727 bp->link_params.port ^= 1; 10728 bnx2x_set_rx_filter(&bp->link_params, 0); 10729 bp->link_params.port ^= 1; 10730 10731 /* Check if the UNDI driver was previously loaded */ 10732 if (bnx2x_prev_is_after_undi(bp)) { 10733 prev_undi = true; 10734 /* clear the UNDI indication */ 10735 REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); 10736 /* clear possible idle check errors */ 10737 REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); 10738 } 10739 if (!CHIP_IS_E1x(bp)) 10740 /* block FW from writing to host */ 10741 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); 10742 10743 /* wait until BRB is empty */ 10744 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); 10745 while (timer_count) { 10746 u32 prev_brb = tmp_reg; 10747 10748 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); 10749 if (!tmp_reg) 10750 break; 10751 10752 BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg); 10753 10754 /* reset timer as long as BRB actually gets emptied */ 10755 if (prev_brb > tmp_reg) 10756 timer_count = 1000; 10757 else 10758 timer_count--; 10759 10760 /* If UNDI resides in memory, manually increment it */ 10761 if (prev_undi) 10762 bnx2x_prev_unload_undi_inc(bp, 1); 10763 10764 udelay(10); 10765 } 10766 10767 if (!timer_count) 10768 BNX2X_ERR("Failed to empty BRB, hope for the best\n"); 10769 } 10770 10771 /* No packets are in the pipeline, path is ready for reset */ 10772 bnx2x_reset_common(bp); 10773 10774 if (mac_vals.xmac_addr) 10775 REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); 10776 if (mac_vals.umac_addr[0]) 10777 REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]); 10778 if (mac_vals.umac_addr[1]) 10779 REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]); 10780 if (mac_vals.emac_addr) 10781 REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); 10782 if (mac_vals.bmac_addr) { 10783 REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); 10784 REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); 10785 } 10786 10787 rc = bnx2x_prev_mark_path(bp, prev_undi); 10788 if (rc) { 10789 bnx2x_prev_mcp_done(bp); 10790 return rc; 10791 } 10792 10793 return bnx2x_prev_mcp_done(bp); 10794} 10795 10796static int bnx2x_prev_unload(struct bnx2x *bp) 10797{ 10798 int time_counter = 10; 10799 u32 rc, fw, hw_lock_reg, hw_lock_val; 10800 BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); 10801 10802 /* clear hw from errors which may have resulted from an interrupted 10803 * dmae transaction. 10804 */ 10805 bnx2x_clean_pglue_errors(bp); 10806 10807 /* Release previously held locks */ 10808 hw_lock_reg = (BP_FUNC(bp) <= 5) ? 10809 (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : 10810 (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); 10811 10812 hw_lock_val = REG_RD(bp, hw_lock_reg); 10813 if (hw_lock_val) { 10814 if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) { 10815 BNX2X_DEV_INFO("Release Previously held NVRAM lock\n"); 10816 REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, 10817 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp))); 10818 } 10819 10820 BNX2X_DEV_INFO("Release Previously held hw lock\n"); 10821 REG_WR(bp, hw_lock_reg, 0xffffffff); 10822 } else 10823 BNX2X_DEV_INFO("No need to release hw/nvram locks\n"); 10824 10825 if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) { 10826 BNX2X_DEV_INFO("Release previously held alr\n"); 10827 bnx2x_release_alr(bp); 10828 } 10829 10830 do { 10831 int aer = 0; 10832 /* Lock MCP using an unload request */ 10833 fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0); 10834 if (!fw) { 10835 BNX2X_ERR("MCP response failure, aborting\n"); 10836 rc = -EBUSY; 10837 break; 10838 } 10839 10840 rc = down_interruptible(&bnx2x_prev_sem); 10841 if (rc) { 10842 BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n", 10843 rc); 10844 } else { 10845 /* If Path is marked by EEH, ignore unload status */ 10846 aer = !!(bnx2x_prev_path_get_entry(bp) && 10847 bnx2x_prev_path_get_entry(bp)->aer); 10848 up(&bnx2x_prev_sem); 10849 } 10850 10851 if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON || aer) { 10852 rc = bnx2x_prev_unload_common(bp); 10853 break; 10854 } 10855 10856 /* non-common reply from MCP might require looping */ 10857 rc = bnx2x_prev_unload_uncommon(bp); 10858 if (rc != BNX2X_PREV_WAIT_NEEDED) 10859 break; 10860 10861 msleep(20); 10862 } while (--time_counter); 10863 10864 if (!time_counter || rc) { 10865 BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n"); 10866 rc = -EPROBE_DEFER; 10867 } 10868 10869 /* Mark function if its port was used to boot from SAN */ 10870 if (bnx2x_port_after_undi(bp)) 10871 bp->link_params.feature_config_flags |= 10872 FEATURE_CONFIG_BOOT_FROM_SAN; 10873 10874 BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc); 10875 10876 return rc; 10877} 10878 10879static void bnx2x_get_common_hwinfo(struct bnx2x *bp) 10880{ 10881 u32 val, val2, val3, val4, id, boot_mode; 10882 u16 pmc; 10883 10884 /* Get the chip revision id and number. */ 10885 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ 10886 val = REG_RD(bp, MISC_REG_CHIP_NUM); 10887 id = ((val & 0xffff) << 16); 10888 val = REG_RD(bp, MISC_REG_CHIP_REV); 10889 id |= ((val & 0xf) << 12); 10890 10891 /* Metal is read from PCI regs, but we can't access >=0x400 from 10892 * the configuration space (so we need to reg_rd) 10893 */ 10894 val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3); 10895 id |= (((val >> 24) & 0xf) << 4); 10896 val = REG_RD(bp, MISC_REG_BOND_ID); 10897 id |= (val & 0xf); 10898 bp->common.chip_id = id; 10899 10900 /* force 57811 according to MISC register */ 10901 if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) { 10902 if (CHIP_IS_57810(bp)) 10903 bp->common.chip_id = (CHIP_NUM_57811 << 16) | 10904 (bp->common.chip_id & 0x0000FFFF); 10905 else if (CHIP_IS_57810_MF(bp)) 10906 bp->common.chip_id = (CHIP_NUM_57811_MF << 16) | 10907 (bp->common.chip_id & 0x0000FFFF); 10908 bp->common.chip_id |= 0x1; 10909 } 10910 10911 /* Set doorbell size */ 10912 bp->db_size = (1 << BNX2X_DB_SHIFT); 10913 10914 if (!CHIP_IS_E1x(bp)) { 10915 val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); 10916 if ((val & 1) == 0) 10917 val = REG_RD(bp, MISC_REG_PORT4MODE_EN); 10918 else 10919 val = (val >> 1) & 1; 10920 BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" : 10921 "2_PORT_MODE"); 10922 bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE : 10923 CHIP_2_PORT_MODE; 10924 10925 if (CHIP_MODE_IS_4_PORT(bp)) 10926 bp->pfid = (bp->pf_num >> 1); /* 0..3 */ 10927 else 10928 bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */ 10929 } else { 10930 bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */ 10931 bp->pfid = bp->pf_num; /* 0..7 */ 10932 } 10933 10934 BNX2X_DEV_INFO("pf_id: %x", bp->pfid); 10935 10936 bp->link_params.chip_id = bp->common.chip_id; 10937 BNX2X_DEV_INFO("chip ID is 0x%x\n", id); 10938 10939 val = (REG_RD(bp, 0x2874) & 0x55); 10940 if ((bp->common.chip_id & 0x1) || 10941 (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) { 10942 bp->flags |= ONE_PORT_FLAG; 10943 BNX2X_DEV_INFO("single port device\n"); 10944 } 10945 10946 val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4); 10947 bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE << 10948 (val & MCPR_NVM_CFG4_FLASH_SIZE)); 10949 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n", 10950 bp->common.flash_size, bp->common.flash_size); 10951 10952 bnx2x_init_shmem(bp); 10953 10954 bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ? 10955 MISC_REG_GENERIC_CR_1 : 10956 MISC_REG_GENERIC_CR_0)); 10957 10958 bp->link_params.shmem_base = bp->common.shmem_base; 10959 bp->link_params.shmem2_base = bp->common.shmem2_base; 10960 if (SHMEM2_RD(bp, size) > 10961 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) 10962 bp->link_params.lfa_base = 10963 REG_RD(bp, bp->common.shmem2_base + 10964 (u32)offsetof(struct shmem2_region, 10965 lfa_host_addr[BP_PORT(bp)])); 10966 else 10967 bp->link_params.lfa_base = 0; 10968 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n", 10969 bp->common.shmem_base, bp->common.shmem2_base); 10970 10971 if (!bp->common.shmem_base) { 10972 BNX2X_DEV_INFO("MCP not active\n"); 10973 bp->flags |= NO_MCP_FLAG; 10974 return; 10975 } 10976 10977 bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); 10978 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config); 10979 10980 bp->link_params.hw_led_mode = ((bp->common.hw_config & 10981 SHARED_HW_CFG_LED_MODE_MASK) >> 10982 SHARED_HW_CFG_LED_MODE_SHIFT); 10983 10984 bp->link_params.feature_config_flags = 0; 10985 val = SHMEM_RD(bp, dev_info.shared_feature_config.config); 10986 if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) 10987 bp->link_params.feature_config_flags |= 10988 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; 10989 else 10990 bp->link_params.feature_config_flags &= 10991 ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; 10992 10993 val = SHMEM_RD(bp, dev_info.bc_rev) >> 8; 10994 bp->common.bc_ver = val; 10995 BNX2X_DEV_INFO("bc_ver %X\n", val); 10996 if (val < BNX2X_BC_VER) { 10997 /* for now only warn 10998 * later we might need to enforce this */ 10999 BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n", 11000 BNX2X_BC_VER, val); 11001 } 11002 bp->link_params.feature_config_flags |= 11003 (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ? 11004 FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0; 11005 11006 bp->link_params.feature_config_flags |= 11007 (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ? 11008 FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0; 11009 bp->link_params.feature_config_flags |= 11010 (val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ? 11011 FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0; 11012 bp->link_params.feature_config_flags |= 11013 (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ? 11014 FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0; 11015 11016 bp->link_params.feature_config_flags |= 11017 (val >= REQ_BC_VER_4_MT_SUPPORTED) ? 11018 FEATURE_CONFIG_MT_SUPPORT : 0; 11019 11020 bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ? 11021 BC_SUPPORTS_PFC_STATS : 0; 11022 11023 bp->flags |= (val >= REQ_BC_VER_4_FCOE_FEATURES) ? 11024 BC_SUPPORTS_FCOE_FEATURES : 0; 11025 11026 bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ? 11027 BC_SUPPORTS_DCBX_MSG_NON_PMF : 0; 11028 11029 bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ? 11030 BC_SUPPORTS_RMMOD_CMD : 0; 11031 11032 boot_mode = SHMEM_RD(bp, 11033 dev_info.port_feature_config[BP_PORT(bp)].mba_config) & 11034 PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK; 11035 switch (boot_mode) { 11036 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE: 11037 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE; 11038 break; 11039 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB: 11040 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI; 11041 break; 11042 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT: 11043 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE; 11044 break; 11045 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE: 11046 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE; 11047 break; 11048 } 11049 11050 pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_PMC, &pmc); 11051 bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG; 11052 11053 BNX2X_DEV_INFO("%sWoL capable\n", 11054 (bp->flags & NO_WOL_FLAG) ? "not " : ""); 11055 11056 val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num); 11057 val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]); 11058 val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]); 11059 val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]); 11060 11061 dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n", 11062 val, val2, val3, val4); 11063} 11064 11065#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID) 11066#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR) 11067 11068static int bnx2x_get_igu_cam_info(struct bnx2x *bp) 11069{ 11070 int pfid = BP_FUNC(bp); 11071 int igu_sb_id; 11072 u32 val; 11073 u8 fid, igu_sb_cnt = 0; 11074 11075 bp->igu_base_sb = 0xff; 11076 if (CHIP_INT_MODE_IS_BC(bp)) { 11077 int vn = BP_VN(bp); 11078 igu_sb_cnt = bp->igu_sb_cnt; 11079 bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * 11080 FP_SB_MAX_E1x; 11081 11082 bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x + 11083 (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn); 11084 11085 return 0; 11086 } 11087 11088 /* IGU in normal mode - read CAM */ 11089 for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; 11090 igu_sb_id++) { 11091 val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4); 11092 if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) 11093 continue; 11094 fid = IGU_FID(val); 11095 if ((fid & IGU_FID_ENCODE_IS_PF)) { 11096 if ((fid & IGU_FID_PF_NUM_MASK) != pfid) 11097 continue; 11098 if (IGU_VEC(val) == 0) 11099 /* default status block */ 11100 bp->igu_dsb_id = igu_sb_id; 11101 else { 11102 if (bp->igu_base_sb == 0xff) 11103 bp->igu_base_sb = igu_sb_id; 11104 igu_sb_cnt++; 11105 } 11106 } 11107 } 11108 11109#ifdef CONFIG_PCI_MSI 11110 /* Due to new PF resource allocation by MFW T7.4 and above, it's 11111 * optional that number of CAM entries will not be equal to the value 11112 * advertised in PCI. 11113 * Driver should use the minimal value of both as the actual status 11114 * block count 11115 */ 11116 bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); 11117#endif 11118 11119 if (igu_sb_cnt == 0) { 11120 BNX2X_ERR("CAM configuration error\n"); 11121 return -EINVAL; 11122 } 11123 11124 return 0; 11125} 11126 11127static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) 11128{ 11129 int cfg_size = 0, idx, port = BP_PORT(bp); 11130 11131 /* Aggregation of supported attributes of all external phys */ 11132 bp->port.supported[0] = 0; 11133 bp->port.supported[1] = 0; 11134 switch (bp->link_params.num_phys) { 11135 case 1: 11136 bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported; 11137 cfg_size = 1; 11138 break; 11139 case 2: 11140 bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported; 11141 cfg_size = 1; 11142 break; 11143 case 3: 11144 if (bp->link_params.multi_phy_config & 11145 PORT_HW_CFG_PHY_SWAPPED_ENABLED) { 11146 bp->port.supported[1] = 11147 bp->link_params.phy[EXT_PHY1].supported; 11148 bp->port.supported[0] = 11149 bp->link_params.phy[EXT_PHY2].supported; 11150 } else { 11151 bp->port.supported[0] = 11152 bp->link_params.phy[EXT_PHY1].supported; 11153 bp->port.supported[1] = 11154 bp->link_params.phy[EXT_PHY2].supported; 11155 } 11156 cfg_size = 2; 11157 break; 11158 } 11159 11160 if (!(bp->port.supported[0] || bp->port.supported[1])) { 11161 BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n", 11162 SHMEM_RD(bp, 11163 dev_info.port_hw_config[port].external_phy_config), 11164 SHMEM_RD(bp, 11165 dev_info.port_hw_config[port].external_phy_config2)); 11166 return; 11167 } 11168 11169 if (CHIP_IS_E3(bp)) 11170 bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR); 11171 else { 11172 switch (switch_cfg) { 11173 case SWITCH_CFG_1G: 11174 bp->port.phy_addr = REG_RD( 11175 bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10); 11176 break; 11177 case SWITCH_CFG_10G: 11178 bp->port.phy_addr = REG_RD( 11179 bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18); 11180 break; 11181 default: 11182 BNX2X_ERR("BAD switch_cfg link_config 0x%x\n", 11183 bp->port.link_config[0]); 11184 return; 11185 } 11186 } 11187 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr); 11188 /* mask what we support according to speed_cap_mask per configuration */ 11189 for (idx = 0; idx < cfg_size; idx++) { 11190 if (!(bp->link_params.speed_cap_mask[idx] & 11191 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) 11192 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half; 11193 11194 if (!(bp->link_params.speed_cap_mask[idx] & 11195 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) 11196 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full; 11197 11198 if (!(bp->link_params.speed_cap_mask[idx] & 11199 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) 11200 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half; 11201 11202 if (!(bp->link_params.speed_cap_mask[idx] & 11203 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) 11204 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full; 11205 11206 if (!(bp->link_params.speed_cap_mask[idx] & 11207 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) 11208 bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half | 11209 SUPPORTED_1000baseT_Full); 11210 11211 if (!(bp->link_params.speed_cap_mask[idx] & 11212 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) 11213 bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full; 11214 11215 if (!(bp->link_params.speed_cap_mask[idx] & 11216 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) 11217 bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full; 11218 11219 if (!(bp->link_params.speed_cap_mask[idx] & 11220 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) 11221 bp->port.supported[idx] &= ~SUPPORTED_20000baseKR2_Full; 11222 } 11223 11224 BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0], 11225 bp->port.supported[1]); 11226} 11227 11228static void bnx2x_link_settings_requested(struct bnx2x *bp) 11229{ 11230 u32 link_config, idx, cfg_size = 0; 11231 bp->port.advertising[0] = 0; 11232 bp->port.advertising[1] = 0; 11233 switch (bp->link_params.num_phys) { 11234 case 1: 11235 case 2: 11236 cfg_size = 1; 11237 break; 11238 case 3: 11239 cfg_size = 2; 11240 break; 11241 } 11242 for (idx = 0; idx < cfg_size; idx++) { 11243 bp->link_params.req_duplex[idx] = DUPLEX_FULL; 11244 link_config = bp->port.link_config[idx]; 11245 switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { 11246 case PORT_FEATURE_LINK_SPEED_AUTO: 11247 if (bp->port.supported[idx] & SUPPORTED_Autoneg) { 11248 bp->link_params.req_line_speed[idx] = 11249 SPEED_AUTO_NEG; 11250 bp->port.advertising[idx] |= 11251 bp->port.supported[idx]; 11252 if (bp->link_params.phy[EXT_PHY1].type == 11253 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) 11254 bp->port.advertising[idx] |= 11255 (SUPPORTED_100baseT_Half | 11256 SUPPORTED_100baseT_Full); 11257 } else { 11258 /* force 10G, no AN */ 11259 bp->link_params.req_line_speed[idx] = 11260 SPEED_10000; 11261 bp->port.advertising[idx] |= 11262 (ADVERTISED_10000baseT_Full | 11263 ADVERTISED_FIBRE); 11264 continue; 11265 } 11266 break; 11267 11268 case PORT_FEATURE_LINK_SPEED_10M_FULL: 11269 if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) { 11270 bp->link_params.req_line_speed[idx] = 11271 SPEED_10; 11272 bp->port.advertising[idx] |= 11273 (ADVERTISED_10baseT_Full | 11274 ADVERTISED_TP); 11275 } else { 11276 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11277 link_config, 11278 bp->link_params.speed_cap_mask[idx]); 11279 return; 11280 } 11281 break; 11282 11283 case PORT_FEATURE_LINK_SPEED_10M_HALF: 11284 if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) { 11285 bp->link_params.req_line_speed[idx] = 11286 SPEED_10; 11287 bp->link_params.req_duplex[idx] = 11288 DUPLEX_HALF; 11289 bp->port.advertising[idx] |= 11290 (ADVERTISED_10baseT_Half | 11291 ADVERTISED_TP); 11292 } else { 11293 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11294 link_config, 11295 bp->link_params.speed_cap_mask[idx]); 11296 return; 11297 } 11298 break; 11299 11300 case PORT_FEATURE_LINK_SPEED_100M_FULL: 11301 if (bp->port.supported[idx] & 11302 SUPPORTED_100baseT_Full) { 11303 bp->link_params.req_line_speed[idx] = 11304 SPEED_100; 11305 bp->port.advertising[idx] |= 11306 (ADVERTISED_100baseT_Full | 11307 ADVERTISED_TP); 11308 } else { 11309 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11310 link_config, 11311 bp->link_params.speed_cap_mask[idx]); 11312 return; 11313 } 11314 break; 11315 11316 case PORT_FEATURE_LINK_SPEED_100M_HALF: 11317 if (bp->port.supported[idx] & 11318 SUPPORTED_100baseT_Half) { 11319 bp->link_params.req_line_speed[idx] = 11320 SPEED_100; 11321 bp->link_params.req_duplex[idx] = 11322 DUPLEX_HALF; 11323 bp->port.advertising[idx] |= 11324 (ADVERTISED_100baseT_Half | 11325 ADVERTISED_TP); 11326 } else { 11327 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11328 link_config, 11329 bp->link_params.speed_cap_mask[idx]); 11330 return; 11331 } 11332 break; 11333 11334 case PORT_FEATURE_LINK_SPEED_1G: 11335 if (bp->port.supported[idx] & 11336 SUPPORTED_1000baseT_Full) { 11337 bp->link_params.req_line_speed[idx] = 11338 SPEED_1000; 11339 bp->port.advertising[idx] |= 11340 (ADVERTISED_1000baseT_Full | 11341 ADVERTISED_TP); 11342 } else if (bp->port.supported[idx] & 11343 SUPPORTED_1000baseKX_Full) { 11344 bp->link_params.req_line_speed[idx] = 11345 SPEED_1000; 11346 bp->port.advertising[idx] |= 11347 ADVERTISED_1000baseKX_Full; 11348 } else { 11349 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11350 link_config, 11351 bp->link_params.speed_cap_mask[idx]); 11352 return; 11353 } 11354 break; 11355 11356 case PORT_FEATURE_LINK_SPEED_2_5G: 11357 if (bp->port.supported[idx] & 11358 SUPPORTED_2500baseX_Full) { 11359 bp->link_params.req_line_speed[idx] = 11360 SPEED_2500; 11361 bp->port.advertising[idx] |= 11362 (ADVERTISED_2500baseX_Full | 11363 ADVERTISED_TP); 11364 } else { 11365 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11366 link_config, 11367 bp->link_params.speed_cap_mask[idx]); 11368 return; 11369 } 11370 break; 11371 11372 case PORT_FEATURE_LINK_SPEED_10G_CX4: 11373 if (bp->port.supported[idx] & 11374 SUPPORTED_10000baseT_Full) { 11375 bp->link_params.req_line_speed[idx] = 11376 SPEED_10000; 11377 bp->port.advertising[idx] |= 11378 (ADVERTISED_10000baseT_Full | 11379 ADVERTISED_FIBRE); 11380 } else if (bp->port.supported[idx] & 11381 SUPPORTED_10000baseKR_Full) { 11382 bp->link_params.req_line_speed[idx] = 11383 SPEED_10000; 11384 bp->port.advertising[idx] |= 11385 (ADVERTISED_10000baseKR_Full | 11386 ADVERTISED_FIBRE); 11387 } else { 11388 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11389 link_config, 11390 bp->link_params.speed_cap_mask[idx]); 11391 return; 11392 } 11393 break; 11394 case PORT_FEATURE_LINK_SPEED_20G: 11395 bp->link_params.req_line_speed[idx] = SPEED_20000; 11396 11397 break; 11398 default: 11399 BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n", 11400 link_config); 11401 bp->link_params.req_line_speed[idx] = 11402 SPEED_AUTO_NEG; 11403 bp->port.advertising[idx] = 11404 bp->port.supported[idx]; 11405 break; 11406 } 11407 11408 bp->link_params.req_flow_ctrl[idx] = (link_config & 11409 PORT_FEATURE_FLOW_CONTROL_MASK); 11410 if (bp->link_params.req_flow_ctrl[idx] == 11411 BNX2X_FLOW_CTRL_AUTO) { 11412 if (!(bp->port.supported[idx] & SUPPORTED_Autoneg)) 11413 bp->link_params.req_flow_ctrl[idx] = 11414 BNX2X_FLOW_CTRL_NONE; 11415 else 11416 bnx2x_set_requested_fc(bp); 11417 } 11418 11419 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n", 11420 bp->link_params.req_line_speed[idx], 11421 bp->link_params.req_duplex[idx], 11422 bp->link_params.req_flow_ctrl[idx], 11423 bp->port.advertising[idx]); 11424 } 11425} 11426 11427static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi) 11428{ 11429 __be16 mac_hi_be = cpu_to_be16(mac_hi); 11430 __be32 mac_lo_be = cpu_to_be32(mac_lo); 11431 memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be)); 11432 memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be)); 11433} 11434 11435static void bnx2x_get_port_hwinfo(struct bnx2x *bp) 11436{ 11437 int port = BP_PORT(bp); 11438 u32 config; 11439 u32 ext_phy_type, ext_phy_config, eee_mode; 11440 11441 bp->link_params.bp = bp; 11442 bp->link_params.port = port; 11443 11444 bp->link_params.lane_config = 11445 SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); 11446 11447 bp->link_params.speed_cap_mask[0] = 11448 SHMEM_RD(bp, 11449 dev_info.port_hw_config[port].speed_capability_mask) & 11450 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; 11451 bp->link_params.speed_cap_mask[1] = 11452 SHMEM_RD(bp, 11453 dev_info.port_hw_config[port].speed_capability_mask2) & 11454 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; 11455 bp->port.link_config[0] = 11456 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); 11457 11458 bp->port.link_config[1] = 11459 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2); 11460 11461 bp->link_params.multi_phy_config = 11462 SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config); 11463 /* If the device is capable of WoL, set the default state according 11464 * to the HW 11465 */ 11466 config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); 11467 bp->wol = (!(bp->flags & NO_WOL_FLAG) && 11468 (config & PORT_FEATURE_WOL_ENABLED)); 11469 11470 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == 11471 PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp)) 11472 bp->flags |= NO_ISCSI_FLAG; 11473 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == 11474 PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp))) 11475 bp->flags |= NO_FCOE_FLAG; 11476 11477 BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n", 11478 bp->link_params.lane_config, 11479 bp->link_params.speed_cap_mask[0], 11480 bp->port.link_config[0]); 11481 11482 bp->link_params.switch_cfg = (bp->port.link_config[0] & 11483 PORT_FEATURE_CONNECTED_SWITCH_MASK); 11484 bnx2x_phy_probe(&bp->link_params); 11485 bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); 11486 11487 bnx2x_link_settings_requested(bp); 11488 11489 /* 11490 * If connected directly, work with the internal PHY, otherwise, work 11491 * with the external PHY 11492 */ 11493 ext_phy_config = 11494 SHMEM_RD(bp, 11495 dev_info.port_hw_config[port].external_phy_config); 11496 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); 11497 if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) 11498 bp->mdio.prtad = bp->port.phy_addr; 11499 11500 else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && 11501 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) 11502 bp->mdio.prtad = 11503 XGXS_EXT_PHY_ADDR(ext_phy_config); 11504 11505 /* Configure link feature according to nvram value */ 11506 eee_mode = (((SHMEM_RD(bp, dev_info. 11507 port_feature_config[port].eee_power_mode)) & 11508 PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >> 11509 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT); 11510 if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) { 11511 bp->link_params.eee_mode = EEE_MODE_ADV_LPI | 11512 EEE_MODE_ENABLE_LPI | 11513 EEE_MODE_OUTPUT_TIME; 11514 } else { 11515 bp->link_params.eee_mode = 0; 11516 } 11517} 11518 11519void bnx2x_get_iscsi_info(struct bnx2x *bp) 11520{ 11521 u32 no_flags = NO_ISCSI_FLAG; 11522 int port = BP_PORT(bp); 11523 u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, 11524 drv_lic_key[port].max_iscsi_conn); 11525 11526 if (!CNIC_SUPPORT(bp)) { 11527 bp->flags |= no_flags; 11528 return; 11529 } 11530 11531 /* Get the number of maximum allowed iSCSI connections */ 11532 bp->cnic_eth_dev.max_iscsi_conn = 11533 (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >> 11534 BNX2X_MAX_ISCSI_INIT_CONN_SHIFT; 11535 11536 BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n", 11537 bp->cnic_eth_dev.max_iscsi_conn); 11538 11539 /* 11540 * If maximum allowed number of connections is zero - 11541 * disable the feature. 11542 */ 11543 if (!bp->cnic_eth_dev.max_iscsi_conn) 11544 bp->flags |= no_flags; 11545} 11546 11547static void bnx2x_get_ext_wwn_info(struct bnx2x *bp, int func) 11548{ 11549 /* Port info */ 11550 bp->cnic_eth_dev.fcoe_wwn_port_name_hi = 11551 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_upper); 11552 bp->cnic_eth_dev.fcoe_wwn_port_name_lo = 11553 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_lower); 11554 11555 /* Node info */ 11556 bp->cnic_eth_dev.fcoe_wwn_node_name_hi = 11557 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_upper); 11558 bp->cnic_eth_dev.fcoe_wwn_node_name_lo = 11559 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_lower); 11560} 11561 11562static int bnx2x_shared_fcoe_funcs(struct bnx2x *bp) 11563{ 11564 u8 count = 0; 11565 11566 if (IS_MF(bp)) { 11567 u8 fid; 11568 11569 /* iterate over absolute function ids for this path: */ 11570 for (fid = BP_PATH(bp); fid < E2_FUNC_MAX * 2; fid += 2) { 11571 if (IS_MF_SD(bp)) { 11572 u32 cfg = MF_CFG_RD(bp, 11573 func_mf_config[fid].config); 11574 11575 if (!(cfg & FUNC_MF_CFG_FUNC_HIDE) && 11576 ((cfg & FUNC_MF_CFG_PROTOCOL_MASK) == 11577 FUNC_MF_CFG_PROTOCOL_FCOE)) 11578 count++; 11579 } else { 11580 u32 cfg = MF_CFG_RD(bp, 11581 func_ext_config[fid]. 11582 func_cfg); 11583 11584 if ((cfg & MACP_FUNC_CFG_FLAGS_ENABLED) && 11585 (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)) 11586 count++; 11587 } 11588 } 11589 } else { /* SF */ 11590 int port, port_cnt = CHIP_MODE_IS_4_PORT(bp) ? 2 : 1; 11591 11592 for (port = 0; port < port_cnt; port++) { 11593 u32 lic = SHMEM_RD(bp, 11594 drv_lic_key[port].max_fcoe_conn) ^ 11595 FW_ENCODE_32BIT_PATTERN; 11596 if (lic) 11597 count++; 11598 } 11599 } 11600 11601 return count; 11602} 11603 11604static void bnx2x_get_fcoe_info(struct bnx2x *bp) 11605{ 11606 int port = BP_PORT(bp); 11607 int func = BP_ABS_FUNC(bp); 11608 u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, 11609 drv_lic_key[port].max_fcoe_conn); 11610 u8 num_fcoe_func = bnx2x_shared_fcoe_funcs(bp); 11611 11612 if (!CNIC_SUPPORT(bp)) { 11613 bp->flags |= NO_FCOE_FLAG; 11614 return; 11615 } 11616 11617 /* Get the number of maximum allowed FCoE connections */ 11618 bp->cnic_eth_dev.max_fcoe_conn = 11619 (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >> 11620 BNX2X_MAX_FCOE_INIT_CONN_SHIFT; 11621 11622 /* Calculate the number of maximum allowed FCoE tasks */ 11623 bp->cnic_eth_dev.max_fcoe_exchanges = MAX_NUM_FCOE_TASKS_PER_ENGINE; 11624 11625 /* check if FCoE resources must be shared between different functions */ 11626 if (num_fcoe_func) 11627 bp->cnic_eth_dev.max_fcoe_exchanges /= num_fcoe_func; 11628 11629 /* Read the WWN: */ 11630 if (!IS_MF(bp)) { 11631 /* Port info */ 11632 bp->cnic_eth_dev.fcoe_wwn_port_name_hi = 11633 SHMEM_RD(bp, 11634 dev_info.port_hw_config[port]. 11635 fcoe_wwn_port_name_upper); 11636 bp->cnic_eth_dev.fcoe_wwn_port_name_lo = 11637 SHMEM_RD(bp, 11638 dev_info.port_hw_config[port]. 11639 fcoe_wwn_port_name_lower); 11640 11641 /* Node info */ 11642 bp->cnic_eth_dev.fcoe_wwn_node_name_hi = 11643 SHMEM_RD(bp, 11644 dev_info.port_hw_config[port]. 11645 fcoe_wwn_node_name_upper); 11646 bp->cnic_eth_dev.fcoe_wwn_node_name_lo = 11647 SHMEM_RD(bp, 11648 dev_info.port_hw_config[port]. 11649 fcoe_wwn_node_name_lower); 11650 } else if (!IS_MF_SD(bp)) { 11651 /* Read the WWN info only if the FCoE feature is enabled for 11652 * this function. 11653 */ 11654 if (BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp)) 11655 bnx2x_get_ext_wwn_info(bp, func); 11656 } else { 11657 if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp)) 11658 bnx2x_get_ext_wwn_info(bp, func); 11659 } 11660 11661 BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn); 11662 11663 /* 11664 * If maximum allowed number of connections is zero - 11665 * disable the feature. 11666 */ 11667 if (!bp->cnic_eth_dev.max_fcoe_conn) 11668 bp->flags |= NO_FCOE_FLAG; 11669} 11670 11671static void bnx2x_get_cnic_info(struct bnx2x *bp) 11672{ 11673 /* 11674 * iSCSI may be dynamically disabled but reading 11675 * info here we will decrease memory usage by driver 11676 * if the feature is disabled for good 11677 */ 11678 bnx2x_get_iscsi_info(bp); 11679 bnx2x_get_fcoe_info(bp); 11680} 11681 11682static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp) 11683{ 11684 u32 val, val2; 11685 int func = BP_ABS_FUNC(bp); 11686 int port = BP_PORT(bp); 11687 u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac; 11688 u8 *fip_mac = bp->fip_mac; 11689 11690 if (IS_MF(bp)) { 11691 /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or 11692 * FCoE MAC then the appropriate feature should be disabled. 11693 * In non SD mode features configuration comes from struct 11694 * func_ext_config. 11695 */ 11696 if (!IS_MF_SD(bp)) { 11697 u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); 11698 if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) { 11699 val2 = MF_CFG_RD(bp, func_ext_config[func]. 11700 iscsi_mac_addr_upper); 11701 val = MF_CFG_RD(bp, func_ext_config[func]. 11702 iscsi_mac_addr_lower); 11703 bnx2x_set_mac_buf(iscsi_mac, val, val2); 11704 BNX2X_DEV_INFO 11705 ("Read iSCSI MAC: %pM\n", iscsi_mac); 11706 } else { 11707 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; 11708 } 11709 11710 if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) { 11711 val2 = MF_CFG_RD(bp, func_ext_config[func]. 11712 fcoe_mac_addr_upper); 11713 val = MF_CFG_RD(bp, func_ext_config[func]. 11714 fcoe_mac_addr_lower); 11715 bnx2x_set_mac_buf(fip_mac, val, val2); 11716 BNX2X_DEV_INFO 11717 ("Read FCoE L2 MAC: %pM\n", fip_mac); 11718 } else { 11719 bp->flags |= NO_FCOE_FLAG; 11720 } 11721 11722 bp->mf_ext_config = cfg; 11723 11724 } else { /* SD MODE */ 11725 if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) { 11726 /* use primary mac as iscsi mac */ 11727 memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN); 11728 11729 BNX2X_DEV_INFO("SD ISCSI MODE\n"); 11730 BNX2X_DEV_INFO 11731 ("Read iSCSI MAC: %pM\n", iscsi_mac); 11732 } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) { 11733 /* use primary mac as fip mac */ 11734 memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN); 11735 BNX2X_DEV_INFO("SD FCoE MODE\n"); 11736 BNX2X_DEV_INFO 11737 ("Read FIP MAC: %pM\n", fip_mac); 11738 } 11739 } 11740 11741 /* If this is a storage-only interface, use SAN mac as 11742 * primary MAC. Notice that for SD this is already the case, 11743 * as the SAN mac was copied from the primary MAC. 11744 */ 11745 if (IS_MF_FCOE_AFEX(bp)) 11746 memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN); 11747 } else { 11748 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11749 iscsi_mac_upper); 11750 val = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11751 iscsi_mac_lower); 11752 bnx2x_set_mac_buf(iscsi_mac, val, val2); 11753 11754 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11755 fcoe_fip_mac_upper); 11756 val = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11757 fcoe_fip_mac_lower); 11758 bnx2x_set_mac_buf(fip_mac, val, val2); 11759 } 11760 11761 /* Disable iSCSI OOO if MAC configuration is invalid. */ 11762 if (!is_valid_ether_addr(iscsi_mac)) { 11763 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; 11764 eth_zero_addr(iscsi_mac); 11765 } 11766 11767 /* Disable FCoE if MAC configuration is invalid. */ 11768 if (!is_valid_ether_addr(fip_mac)) { 11769 bp->flags |= NO_FCOE_FLAG; 11770 eth_zero_addr(bp->fip_mac); 11771 } 11772} 11773 11774static void bnx2x_get_mac_hwinfo(struct bnx2x *bp) 11775{ 11776 u32 val, val2; 11777 int func = BP_ABS_FUNC(bp); 11778 int port = BP_PORT(bp); 11779 11780 /* Zero primary MAC configuration */ 11781 eth_zero_addr(bp->dev->dev_addr); 11782 11783 if (BP_NOMCP(bp)) { 11784 BNX2X_ERROR("warning: random MAC workaround active\n"); 11785 eth_hw_addr_random(bp->dev); 11786 } else if (IS_MF(bp)) { 11787 val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper); 11788 val = MF_CFG_RD(bp, func_mf_config[func].mac_lower); 11789 if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) && 11790 (val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) 11791 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); 11792 11793 if (CNIC_SUPPORT(bp)) 11794 bnx2x_get_cnic_mac_hwinfo(bp); 11795 } else { 11796 /* in SF read MACs from port configuration */ 11797 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); 11798 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); 11799 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); 11800 11801 if (CNIC_SUPPORT(bp)) 11802 bnx2x_get_cnic_mac_hwinfo(bp); 11803 } 11804 11805 if (!BP_NOMCP(bp)) { 11806 /* Read physical port identifier from shmem */ 11807 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); 11808 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); 11809 bnx2x_set_mac_buf(bp->phys_port_id, val, val2); 11810 bp->flags |= HAS_PHYS_PORT_ID; 11811 } 11812 11813 memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); 11814 11815 if (!is_valid_ether_addr(bp->dev->dev_addr)) 11816 dev_err(&bp->pdev->dev, 11817 "bad Ethernet MAC address configuration: %pM\n" 11818 "change it manually before bringing up the appropriate network interface\n", 11819 bp->dev->dev_addr); 11820} 11821 11822static bool bnx2x_get_dropless_info(struct bnx2x *bp) 11823{ 11824 int tmp; 11825 u32 cfg; 11826 11827 if (IS_VF(bp)) 11828 return false; 11829 11830 if (IS_MF(bp) && !CHIP_IS_E1x(bp)) { 11831 /* Take function: tmp = func */ 11832 tmp = BP_ABS_FUNC(bp); 11833 cfg = MF_CFG_RD(bp, func_ext_config[tmp].func_cfg); 11834 cfg = !!(cfg & MACP_FUNC_CFG_PAUSE_ON_HOST_RING); 11835 } else { 11836 /* Take port: tmp = port */ 11837 tmp = BP_PORT(bp); 11838 cfg = SHMEM_RD(bp, 11839 dev_info.port_hw_config[tmp].generic_features); 11840 cfg = !!(cfg & PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED); 11841 } 11842 return cfg; 11843} 11844 11845static void validate_set_si_mode(struct bnx2x *bp) 11846{ 11847 u8 func = BP_ABS_FUNC(bp); 11848 u32 val; 11849 11850 val = MF_CFG_RD(bp, func_mf_config[func].mac_upper); 11851 11852 /* check for legal mac (upper bytes) */ 11853 if (val != 0xffff) { 11854 bp->mf_mode = MULTI_FUNCTION_SI; 11855 bp->mf_config[BP_VN(bp)] = 11856 MF_CFG_RD(bp, func_mf_config[func].config); 11857 } else 11858 BNX2X_DEV_INFO("illegal MAC address for SI\n"); 11859} 11860 11861static int bnx2x_get_hwinfo(struct bnx2x *bp) 11862{ 11863 int /*abs*/func = BP_ABS_FUNC(bp); 11864 int vn, mfw_vn; 11865 u32 val = 0, val2 = 0; 11866 int rc = 0; 11867 11868 /* Validate that chip access is feasible */ 11869 if (REG_RD(bp, MISC_REG_CHIP_NUM) == 0xffffffff) { 11870 dev_err(&bp->pdev->dev, 11871 "Chip read returns all Fs. Preventing probe from continuing\n"); 11872 return -EINVAL; 11873 } 11874 11875 bnx2x_get_common_hwinfo(bp); 11876 11877 /* 11878 * initialize IGU parameters 11879 */ 11880 if (CHIP_IS_E1x(bp)) { 11881 bp->common.int_block = INT_BLOCK_HC; 11882 11883 bp->igu_dsb_id = DEF_SB_IGU_ID; 11884 bp->igu_base_sb = 0; 11885 } else { 11886 bp->common.int_block = INT_BLOCK_IGU; 11887 11888 /* do not allow device reset during IGU info processing */ 11889 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 11890 11891 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); 11892 11893 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { 11894 int tout = 5000; 11895 11896 BNX2X_DEV_INFO("FORCING Normal Mode\n"); 11897 11898 val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN); 11899 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val); 11900 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f); 11901 11902 while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) { 11903 tout--; 11904 usleep_range(1000, 2000); 11905 } 11906 11907 if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) { 11908 dev_err(&bp->pdev->dev, 11909 "FORCING Normal Mode failed!!!\n"); 11910 bnx2x_release_hw_lock(bp, 11911 HW_LOCK_RESOURCE_RESET); 11912 return -EPERM; 11913 } 11914 } 11915 11916 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { 11917 BNX2X_DEV_INFO("IGU Backward Compatible Mode\n"); 11918 bp->common.int_block |= INT_BLOCK_MODE_BW_COMP; 11919 } else 11920 BNX2X_DEV_INFO("IGU Normal Mode\n"); 11921 11922 rc = bnx2x_get_igu_cam_info(bp); 11923 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 11924 if (rc) 11925 return rc; 11926 } 11927 11928 /* 11929 * set base FW non-default (fast path) status block id, this value is 11930 * used to initialize the fw_sb_id saved on the fp/queue structure to 11931 * determine the id used by the FW. 11932 */ 11933 if (CHIP_IS_E1x(bp)) 11934 bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp); 11935 else /* 11936 * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of 11937 * the same queue are indicated on the same IGU SB). So we prefer 11938 * FW and IGU SBs to be the same value. 11939 */ 11940 bp->base_fw_ndsb = bp->igu_base_sb; 11941 11942 BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n" 11943 "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb, 11944 bp->igu_sb_cnt, bp->base_fw_ndsb); 11945 11946 /* 11947 * Initialize MF configuration 11948 */ 11949 11950 bp->mf_ov = 0; 11951 bp->mf_mode = 0; 11952 bp->mf_sub_mode = 0; 11953 vn = BP_VN(bp); 11954 mfw_vn = BP_FW_MB_IDX(bp); 11955 11956 if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { 11957 BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", 11958 bp->common.shmem2_base, SHMEM2_RD(bp, size), 11959 (u32)offsetof(struct shmem2_region, mf_cfg_addr)); 11960 11961 if (SHMEM2_HAS(bp, mf_cfg_addr)) 11962 bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr); 11963 else 11964 bp->common.mf_cfg_base = bp->common.shmem_base + 11965 offsetof(struct shmem_region, func_mb) + 11966 E1H_FUNC_MAX * sizeof(struct drv_func_mb); 11967 /* 11968 * get mf configuration: 11969 * 1. Existence of MF configuration 11970 * 2. MAC address must be legal (check only upper bytes) 11971 * for Switch-Independent mode; 11972 * OVLAN must be legal for Switch-Dependent mode 11973 * 3. SF_MODE configures specific MF mode 11974 */ 11975 if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { 11976 /* get mf configuration */ 11977 val = SHMEM_RD(bp, 11978 dev_info.shared_feature_config.config); 11979 val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK; 11980 11981 switch (val) { 11982 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT: 11983 validate_set_si_mode(bp); 11984 break; 11985 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE: 11986 if ((!CHIP_IS_E1x(bp)) && 11987 (MF_CFG_RD(bp, func_mf_config[func]. 11988 mac_upper) != 0xffff) && 11989 (SHMEM2_HAS(bp, 11990 afex_driver_support))) { 11991 bp->mf_mode = MULTI_FUNCTION_AFEX; 11992 bp->mf_config[vn] = MF_CFG_RD(bp, 11993 func_mf_config[func].config); 11994 } else { 11995 BNX2X_DEV_INFO("can not configure afex mode\n"); 11996 } 11997 break; 11998 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED: 11999 /* get OV configuration */ 12000 val = MF_CFG_RD(bp, 12001 func_mf_config[FUNC_0].e1hov_tag); 12002 val &= FUNC_MF_CFG_E1HOV_TAG_MASK; 12003 12004 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { 12005 bp->mf_mode = MULTI_FUNCTION_SD; 12006 bp->mf_config[vn] = MF_CFG_RD(bp, 12007 func_mf_config[func].config); 12008 } else 12009 BNX2X_DEV_INFO("illegal OV for SD\n"); 12010 break; 12011 case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE: 12012 bp->mf_mode = MULTI_FUNCTION_SD; 12013 bp->mf_sub_mode = SUB_MF_MODE_BD; 12014 bp->mf_config[vn] = 12015 MF_CFG_RD(bp, 12016 func_mf_config[func].config); 12017 12018 if (SHMEM2_HAS(bp, mtu_size)) { 12019 int mtu_idx = BP_FW_MB_IDX(bp); 12020 u16 mtu_size; 12021 u32 mtu; 12022 12023 mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]); 12024 mtu_size = (u16)mtu; 12025 DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n", 12026 mtu_size, mtu); 12027 12028 /* if valid: update device mtu */ 12029 if (((mtu_size + ETH_HLEN) >= 12030 ETH_MIN_PACKET_SIZE) && 12031 (mtu_size <= 12032 ETH_MAX_JUMBO_PACKET_SIZE)) 12033 bp->dev->mtu = mtu_size; 12034 } 12035 break; 12036 case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE: 12037 bp->mf_mode = MULTI_FUNCTION_SD; 12038 bp->mf_sub_mode = SUB_MF_MODE_UFP; 12039 bp->mf_config[vn] = 12040 MF_CFG_RD(bp, 12041 func_mf_config[func].config); 12042 break; 12043 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF: 12044 bp->mf_config[vn] = 0; 12045 break; 12046 case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE: 12047 val2 = SHMEM_RD(bp, 12048 dev_info.shared_hw_config.config_3); 12049 val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK; 12050 switch (val2) { 12051 case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5: 12052 validate_set_si_mode(bp); 12053 bp->mf_sub_mode = 12054 SUB_MF_MODE_NPAR1_DOT_5; 12055 break; 12056 default: 12057 /* Unknown configuration */ 12058 bp->mf_config[vn] = 0; 12059 BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n", 12060 val); 12061 } 12062 break; 12063 default: 12064 /* Unknown configuration: reset mf_config */ 12065 bp->mf_config[vn] = 0; 12066 BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val); 12067 } 12068 } 12069 12070 BNX2X_DEV_INFO("%s function mode\n", 12071 IS_MF(bp) ? "multi" : "single"); 12072 12073 switch (bp->mf_mode) { 12074 case MULTI_FUNCTION_SD: 12075 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 12076 FUNC_MF_CFG_E1HOV_TAG_MASK; 12077 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { 12078 bp->mf_ov = val; 12079 bp->path_has_ovlan = true; 12080 12081 BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n", 12082 func, bp->mf_ov, bp->mf_ov); 12083 } else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) || 12084 (bp->mf_sub_mode == SUB_MF_MODE_BD)) { 12085 dev_err(&bp->pdev->dev, 12086 "Unexpected - no valid MF OV for func %d in UFP/BD mode\n", 12087 func); 12088 bp->path_has_ovlan = true; 12089 } else { 12090 dev_err(&bp->pdev->dev, 12091 "No valid MF OV for func %d, aborting\n", 12092 func); 12093 return -EPERM; 12094 } 12095 break; 12096 case MULTI_FUNCTION_AFEX: 12097 BNX2X_DEV_INFO("func %d is in MF afex mode\n", func); 12098 break; 12099 case MULTI_FUNCTION_SI: 12100 BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n", 12101 func); 12102 break; 12103 default: 12104 if (vn) { 12105 dev_err(&bp->pdev->dev, 12106 "VN %d is in a single function mode, aborting\n", 12107 vn); 12108 return -EPERM; 12109 } 12110 break; 12111 } 12112 12113 /* check if other port on the path needs ovlan: 12114 * Since MF configuration is shared between ports 12115 * Possible mixed modes are only 12116 * {SF, SI} {SF, SD} {SD, SF} {SI, SF} 12117 */ 12118 if (CHIP_MODE_IS_4_PORT(bp) && 12119 !bp->path_has_ovlan && 12120 !IS_MF(bp) && 12121 bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { 12122 u8 other_port = !BP_PORT(bp); 12123 u8 other_func = BP_PATH(bp) + 2*other_port; 12124 val = MF_CFG_RD(bp, 12125 func_mf_config[other_func].e1hov_tag); 12126 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) 12127 bp->path_has_ovlan = true; 12128 } 12129 } 12130 12131 /* adjust igu_sb_cnt to MF for E1H */ 12132 if (CHIP_IS_E1H(bp) && IS_MF(bp)) 12133 bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT); 12134 12135 /* port info */ 12136 bnx2x_get_port_hwinfo(bp); 12137 12138 /* Get MAC addresses */ 12139 bnx2x_get_mac_hwinfo(bp); 12140 12141 bnx2x_get_cnic_info(bp); 12142 12143 return rc; 12144} 12145 12146static void bnx2x_read_fwinfo(struct bnx2x *bp) 12147{ 12148 int cnt, i, block_end, rodi; 12149 char vpd_start[BNX2X_VPD_LEN+1]; 12150 char str_id_reg[VENDOR_ID_LEN+1]; 12151 char str_id_cap[VENDOR_ID_LEN+1]; 12152 char *vpd_data; 12153 char *vpd_extended_data = NULL; 12154 u8 len; 12155 12156 cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start); 12157 memset(bp->fw_ver, 0, sizeof(bp->fw_ver)); 12158 12159 if (cnt < BNX2X_VPD_LEN) 12160 goto out_not_found; 12161 12162 /* VPD RO tag should be first tag after identifier string, hence 12163 * we should be able to find it in first BNX2X_VPD_LEN chars 12164 */ 12165 i = pci_vpd_find_tag(vpd_start, 0, BNX2X_VPD_LEN, 12166 PCI_VPD_LRDT_RO_DATA); 12167 if (i < 0) 12168 goto out_not_found; 12169 12170 block_end = i + PCI_VPD_LRDT_TAG_SIZE + 12171 pci_vpd_lrdt_size(&vpd_start[i]); 12172 12173 i += PCI_VPD_LRDT_TAG_SIZE; 12174 12175 if (block_end > BNX2X_VPD_LEN) { 12176 vpd_extended_data = kmalloc(block_end, GFP_KERNEL); 12177 if (vpd_extended_data == NULL) 12178 goto out_not_found; 12179 12180 /* read rest of vpd image into vpd_extended_data */ 12181 memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN); 12182 cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN, 12183 block_end - BNX2X_VPD_LEN, 12184 vpd_extended_data + BNX2X_VPD_LEN); 12185 if (cnt < (block_end - BNX2X_VPD_LEN)) 12186 goto out_not_found; 12187 vpd_data = vpd_extended_data; 12188 } else 12189 vpd_data = vpd_start; 12190 12191 /* now vpd_data holds full vpd content in both cases */ 12192 12193 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, 12194 PCI_VPD_RO_KEYWORD_MFR_ID); 12195 if (rodi < 0) 12196 goto out_not_found; 12197 12198 len = pci_vpd_info_field_size(&vpd_data[rodi]); 12199 12200 if (len != VENDOR_ID_LEN) 12201 goto out_not_found; 12202 12203 rodi += PCI_VPD_INFO_FLD_HDR_SIZE; 12204 12205 /* vendor specific info */ 12206 snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL); 12207 snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL); 12208 if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) || 12209 !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) { 12210 12211 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, 12212 PCI_VPD_RO_KEYWORD_VENDOR0); 12213 if (rodi >= 0) { 12214 len = pci_vpd_info_field_size(&vpd_data[rodi]); 12215 12216 rodi += PCI_VPD_INFO_FLD_HDR_SIZE; 12217 12218 if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) { 12219 memcpy(bp->fw_ver, &vpd_data[rodi], len); 12220 bp->fw_ver[len] = ' '; 12221 } 12222 } 12223 kfree(vpd_extended_data); 12224 return; 12225 } 12226out_not_found: 12227 kfree(vpd_extended_data); 12228 return; 12229} 12230 12231static void bnx2x_set_modes_bitmap(struct bnx2x *bp) 12232{ 12233 u32 flags = 0; 12234 12235 if (CHIP_REV_IS_FPGA(bp)) 12236 SET_FLAGS(flags, MODE_FPGA); 12237 else if (CHIP_REV_IS_EMUL(bp)) 12238 SET_FLAGS(flags, MODE_EMUL); 12239 else 12240 SET_FLAGS(flags, MODE_ASIC); 12241 12242 if (CHIP_MODE_IS_4_PORT(bp)) 12243 SET_FLAGS(flags, MODE_PORT4); 12244 else 12245 SET_FLAGS(flags, MODE_PORT2); 12246 12247 if (CHIP_IS_E2(bp)) 12248 SET_FLAGS(flags, MODE_E2); 12249 else if (CHIP_IS_E3(bp)) { 12250 SET_FLAGS(flags, MODE_E3); 12251 if (CHIP_REV(bp) == CHIP_REV_Ax) 12252 SET_FLAGS(flags, MODE_E3_A0); 12253 else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/ 12254 SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3); 12255 } 12256 12257 if (IS_MF(bp)) { 12258 SET_FLAGS(flags, MODE_MF); 12259 switch (bp->mf_mode) { 12260 case MULTI_FUNCTION_SD: 12261 SET_FLAGS(flags, MODE_MF_SD); 12262 break; 12263 case MULTI_FUNCTION_SI: 12264 SET_FLAGS(flags, MODE_MF_SI); 12265 break; 12266 case MULTI_FUNCTION_AFEX: 12267 SET_FLAGS(flags, MODE_MF_AFEX); 12268 break; 12269 } 12270 } else 12271 SET_FLAGS(flags, MODE_SF); 12272 12273#if defined(__LITTLE_ENDIAN) 12274 SET_FLAGS(flags, MODE_LITTLE_ENDIAN); 12275#else /*(__BIG_ENDIAN)*/ 12276 SET_FLAGS(flags, MODE_BIG_ENDIAN); 12277#endif 12278 INIT_MODE_FLAGS(bp) = flags; 12279} 12280 12281static int bnx2x_init_bp(struct bnx2x *bp) 12282{ 12283 int func; 12284 int rc; 12285 12286 mutex_init(&bp->port.phy_mutex); 12287 mutex_init(&bp->fw_mb_mutex); 12288 mutex_init(&bp->drv_info_mutex); 12289 sema_init(&bp->stats_lock, 1); 12290 bp->drv_info_mng_owner = false; 12291 INIT_LIST_HEAD(&bp->vlan_reg); 12292 12293 INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); 12294 INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); 12295 INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); 12296 INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task); 12297 if (IS_PF(bp)) { 12298 rc = bnx2x_get_hwinfo(bp); 12299 if (rc) 12300 return rc; 12301 } else { 12302 eth_zero_addr(bp->dev->dev_addr); 12303 } 12304 12305 bnx2x_set_modes_bitmap(bp); 12306 12307 rc = bnx2x_alloc_mem_bp(bp); 12308 if (rc) 12309 return rc; 12310 12311 bnx2x_read_fwinfo(bp); 12312 12313 func = BP_FUNC(bp); 12314 12315 /* need to reset chip if undi was active */ 12316 if (IS_PF(bp) && !BP_NOMCP(bp)) { 12317 /* init fw_seq */ 12318 bp->fw_seq = 12319 SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & 12320 DRV_MSG_SEQ_NUMBER_MASK; 12321 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); 12322 12323 rc = bnx2x_prev_unload(bp); 12324 if (rc) { 12325 bnx2x_free_mem_bp(bp); 12326 return rc; 12327 } 12328 } 12329 12330 if (CHIP_REV_IS_FPGA(bp)) 12331 dev_err(&bp->pdev->dev, "FPGA detected\n"); 12332 12333 if (BP_NOMCP(bp) && (func == 0)) 12334 dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n"); 12335 12336 bp->disable_tpa = disable_tpa; 12337 bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp); 12338 /* Reduce memory usage in kdump environment by disabling TPA */ 12339 bp->disable_tpa |= is_kdump_kernel(); 12340 12341 /* Set TPA flags */ 12342 if (bp->disable_tpa) { 12343 bp->dev->hw_features &= ~NETIF_F_LRO; 12344 bp->dev->features &= ~NETIF_F_LRO; 12345 } 12346 12347 if (CHIP_IS_E1(bp)) 12348 bp->dropless_fc = 0; 12349 else 12350 bp->dropless_fc = dropless_fc | bnx2x_get_dropless_info(bp); 12351 12352 bp->mrrs = mrrs; 12353 12354 bp->tx_ring_size = IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL; 12355 if (IS_VF(bp)) 12356 bp->rx_ring_size = MAX_RX_AVAIL; 12357 12358 /* make sure that the numbers are in the right granularity */ 12359 bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; 12360 bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR; 12361 12362 bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ; 12363 12364 init_timer(&bp->timer); 12365 bp->timer.expires = jiffies + bp->current_interval; 12366 bp->timer.data = (unsigned long) bp; 12367 bp->timer.function = bnx2x_timer; 12368 12369 if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) && 12370 SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) && 12371 SHMEM2_RD(bp, dcbx_lldp_params_offset) && 12372 SHMEM2_RD(bp, dcbx_lldp_dcbx_stat_offset)) { 12373 bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON); 12374 bnx2x_dcbx_init_params(bp); 12375 } else { 12376 bnx2x_dcbx_set_state(bp, false, BNX2X_DCBX_ENABLED_OFF); 12377 } 12378 12379 if (CHIP_IS_E1x(bp)) 12380 bp->cnic_base_cl_id = FP_SB_MAX_E1x; 12381 else 12382 bp->cnic_base_cl_id = FP_SB_MAX_E2; 12383 12384 /* multiple tx priority */ 12385 if (IS_VF(bp)) 12386 bp->max_cos = 1; 12387 else if (CHIP_IS_E1x(bp)) 12388 bp->max_cos = BNX2X_MULTI_TX_COS_E1X; 12389 else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) 12390 bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; 12391 else if (CHIP_IS_E3B0(bp)) 12392 bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; 12393 else 12394 BNX2X_ERR("unknown chip %x revision %x\n", 12395 CHIP_NUM(bp), CHIP_REV(bp)); 12396 BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos); 12397 12398 /* We need at least one default status block for slow-path events, 12399 * second status block for the L2 queue, and a third status block for 12400 * CNIC if supported. 12401 */ 12402 if (IS_VF(bp)) 12403 bp->min_msix_vec_cnt = 1; 12404 else if (CNIC_SUPPORT(bp)) 12405 bp->min_msix_vec_cnt = 3; 12406 else /* PF w/o cnic */ 12407 bp->min_msix_vec_cnt = 2; 12408 BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp->min_msix_vec_cnt); 12409 12410 bp->dump_preset_idx = 1; 12411 12412 if (CHIP_IS_E3B0(bp)) 12413 bp->flags |= PTP_SUPPORTED; 12414 12415 return rc; 12416} 12417 12418/**************************************************************************** 12419* General service functions 12420****************************************************************************/ 12421 12422/* 12423 * net_device service functions 12424 */ 12425 12426/* called with rtnl_lock */ 12427static int bnx2x_open(struct net_device *dev) 12428{ 12429 struct bnx2x *bp = netdev_priv(dev); 12430 int rc; 12431 12432 bp->stats_init = true; 12433 12434 netif_carrier_off(dev); 12435 12436 bnx2x_set_power_state(bp, PCI_D0); 12437 12438 /* If parity had happen during the unload, then attentions 12439 * and/or RECOVERY_IN_PROGRES may still be set. In this case we 12440 * want the first function loaded on the current engine to 12441 * complete the recovery. 12442 * Parity recovery is only relevant for PF driver. 12443 */ 12444 if (IS_PF(bp)) { 12445 int other_engine = BP_PATH(bp) ? 0 : 1; 12446 bool other_load_status, load_status; 12447 bool global = false; 12448 12449 other_load_status = bnx2x_get_load_status(bp, other_engine); 12450 load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); 12451 if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || 12452 bnx2x_chk_parity_attn(bp, &global, true)) { 12453 do { 12454 /* If there are attentions and they are in a 12455 * global blocks, set the GLOBAL_RESET bit 12456 * regardless whether it will be this function 12457 * that will complete the recovery or not. 12458 */ 12459 if (global) 12460 bnx2x_set_reset_global(bp); 12461 12462 /* Only the first function on the current 12463 * engine should try to recover in open. In case 12464 * of attentions in global blocks only the first 12465 * in the chip should try to recover. 12466 */ 12467 if ((!load_status && 12468 (!global || !other_load_status)) && 12469 bnx2x_trylock_leader_lock(bp) && 12470 !bnx2x_leader_reset(bp)) { 12471 netdev_info(bp->dev, 12472 "Recovered in open\n"); 12473 break; 12474 } 12475 12476 /* recovery has failed... */ 12477 bnx2x_set_power_state(bp, PCI_D3hot); 12478 bp->recovery_state = BNX2X_RECOVERY_FAILED; 12479 12480 BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n" 12481 "If you still see this message after a few retries then power cycle is required.\n"); 12482 12483 return -EAGAIN; 12484 } while (0); 12485 } 12486 } 12487 12488 bp->recovery_state = BNX2X_RECOVERY_DONE; 12489 rc = bnx2x_nic_load(bp, LOAD_OPEN); 12490 if (rc) 12491 return rc; 12492 12493#ifdef CONFIG_BNX2X_VXLAN 12494 if (IS_PF(bp)) 12495 vxlan_get_rx_port(dev); 12496#endif 12497 12498 return 0; 12499} 12500 12501/* called with rtnl_lock */ 12502static int bnx2x_close(struct net_device *dev) 12503{ 12504 struct bnx2x *bp = netdev_priv(dev); 12505 12506 /* Unload the driver, release IRQs */ 12507 bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); 12508 12509 return 0; 12510} 12511 12512static int bnx2x_init_mcast_macs_list(struct bnx2x *bp, 12513 struct bnx2x_mcast_ramrod_params *p) 12514{ 12515 int mc_count = netdev_mc_count(bp->dev); 12516 struct bnx2x_mcast_list_elem *mc_mac = 12517 kcalloc(mc_count, sizeof(*mc_mac), GFP_ATOMIC); 12518 struct netdev_hw_addr *ha; 12519 12520 if (!mc_mac) 12521 return -ENOMEM; 12522 12523 INIT_LIST_HEAD(&p->mcast_list); 12524 12525 netdev_for_each_mc_addr(ha, bp->dev) { 12526 mc_mac->mac = bnx2x_mc_addr(ha); 12527 list_add_tail(&mc_mac->link, &p->mcast_list); 12528 mc_mac++; 12529 } 12530 12531 p->mcast_list_len = mc_count; 12532 12533 return 0; 12534} 12535 12536static void bnx2x_free_mcast_macs_list( 12537 struct bnx2x_mcast_ramrod_params *p) 12538{ 12539 struct bnx2x_mcast_list_elem *mc_mac = 12540 list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem, 12541 link); 12542 12543 WARN_ON(!mc_mac); 12544 kfree(mc_mac); 12545} 12546 12547/** 12548 * bnx2x_set_uc_list - configure a new unicast MACs list. 12549 * 12550 * @bp: driver handle 12551 * 12552 * We will use zero (0) as a MAC type for these MACs. 12553 */ 12554static int bnx2x_set_uc_list(struct bnx2x *bp) 12555{ 12556 int rc; 12557 struct net_device *dev = bp->dev; 12558 struct netdev_hw_addr *ha; 12559 struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj; 12560 unsigned long ramrod_flags = 0; 12561 12562 /* First schedule a cleanup up of old configuration */ 12563 rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false); 12564 if (rc < 0) { 12565 BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc); 12566 return rc; 12567 } 12568 12569 netdev_for_each_uc_addr(ha, dev) { 12570 rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, 12571 BNX2X_UC_LIST_MAC, &ramrod_flags); 12572 if (rc == -EEXIST) { 12573 DP(BNX2X_MSG_SP, 12574 "Failed to schedule ADD operations: %d\n", rc); 12575 /* do not treat adding same MAC as error */ 12576 rc = 0; 12577 12578 } else if (rc < 0) { 12579 12580 BNX2X_ERR("Failed to schedule ADD operations: %d\n", 12581 rc); 12582 return rc; 12583 } 12584 } 12585 12586 /* Execute the pending commands */ 12587 __set_bit(RAMROD_CONT, &ramrod_flags); 12588 return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */, 12589 BNX2X_UC_LIST_MAC, &ramrod_flags); 12590} 12591 12592static int bnx2x_set_mc_list(struct bnx2x *bp) 12593{ 12594 struct net_device *dev = bp->dev; 12595 struct bnx2x_mcast_ramrod_params rparam = {NULL}; 12596 int rc = 0; 12597 12598 rparam.mcast_obj = &bp->mcast_obj; 12599 12600 /* first, clear all configured multicast MACs */ 12601 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); 12602 if (rc < 0) { 12603 BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc); 12604 return rc; 12605 } 12606 12607 /* then, configure a new MACs list */ 12608 if (netdev_mc_count(dev)) { 12609 rc = bnx2x_init_mcast_macs_list(bp, &rparam); 12610 if (rc) { 12611 BNX2X_ERR("Failed to create multicast MACs list: %d\n", 12612 rc); 12613 return rc; 12614 } 12615 12616 /* Now add the new MACs */ 12617 rc = bnx2x_config_mcast(bp, &rparam, 12618 BNX2X_MCAST_CMD_ADD); 12619 if (rc < 0) 12620 BNX2X_ERR("Failed to set a new multicast configuration: %d\n", 12621 rc); 12622 12623 bnx2x_free_mcast_macs_list(&rparam); 12624 } 12625 12626 return rc; 12627} 12628 12629/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */ 12630static void bnx2x_set_rx_mode(struct net_device *dev) 12631{ 12632 struct bnx2x *bp = netdev_priv(dev); 12633 12634 if (bp->state != BNX2X_STATE_OPEN) { 12635 DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); 12636 return; 12637 } else { 12638 /* Schedule an SP task to handle rest of change */ 12639 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE, 12640 NETIF_MSG_IFUP); 12641 } 12642} 12643 12644void bnx2x_set_rx_mode_inner(struct bnx2x *bp) 12645{ 12646 u32 rx_mode = BNX2X_RX_MODE_NORMAL; 12647 12648 DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags); 12649 12650 netif_addr_lock_bh(bp->dev); 12651 12652 if (bp->dev->flags & IFF_PROMISC) { 12653 rx_mode = BNX2X_RX_MODE_PROMISC; 12654 } else if ((bp->dev->flags & IFF_ALLMULTI) || 12655 ((netdev_mc_count(bp->dev) > BNX2X_MAX_MULTICAST) && 12656 CHIP_IS_E1(bp))) { 12657 rx_mode = BNX2X_RX_MODE_ALLMULTI; 12658 } else { 12659 if (IS_PF(bp)) { 12660 /* some multicasts */ 12661 if (bnx2x_set_mc_list(bp) < 0) 12662 rx_mode = BNX2X_RX_MODE_ALLMULTI; 12663 12664 /* release bh lock, as bnx2x_set_uc_list might sleep */ 12665 netif_addr_unlock_bh(bp->dev); 12666 if (bnx2x_set_uc_list(bp) < 0) 12667 rx_mode = BNX2X_RX_MODE_PROMISC; 12668 netif_addr_lock_bh(bp->dev); 12669 } else { 12670 /* configuring mcast to a vf involves sleeping (when we 12671 * wait for the pf's response). 12672 */ 12673 bnx2x_schedule_sp_rtnl(bp, 12674 BNX2X_SP_RTNL_VFPF_MCAST, 0); 12675 } 12676 } 12677 12678 bp->rx_mode = rx_mode; 12679 /* handle ISCSI SD mode */ 12680 if (IS_MF_ISCSI_ONLY(bp)) 12681 bp->rx_mode = BNX2X_RX_MODE_NONE; 12682 12683 /* Schedule the rx_mode command */ 12684 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) { 12685 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); 12686 netif_addr_unlock_bh(bp->dev); 12687 return; 12688 } 12689 12690 if (IS_PF(bp)) { 12691 bnx2x_set_storm_rx_mode(bp); 12692 netif_addr_unlock_bh(bp->dev); 12693 } else { 12694 /* VF will need to request the PF to make this change, and so 12695 * the VF needs to release the bottom-half lock prior to the 12696 * request (as it will likely require sleep on the VF side) 12697 */ 12698 netif_addr_unlock_bh(bp->dev); 12699 bnx2x_vfpf_storm_rx_mode(bp); 12700 } 12701} 12702 12703/* called with rtnl_lock */ 12704static int bnx2x_mdio_read(struct net_device *netdev, int prtad, 12705 int devad, u16 addr) 12706{ 12707 struct bnx2x *bp = netdev_priv(netdev); 12708 u16 value; 12709 int rc; 12710 12711 DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n", 12712 prtad, devad, addr); 12713 12714 /* The HW expects different devad if CL22 is used */ 12715 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; 12716 12717 bnx2x_acquire_phy_lock(bp); 12718 rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value); 12719 bnx2x_release_phy_lock(bp); 12720 DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc); 12721 12722 if (!rc) 12723 rc = value; 12724 return rc; 12725} 12726 12727/* called with rtnl_lock */ 12728static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad, 12729 u16 addr, u16 value) 12730{ 12731 struct bnx2x *bp = netdev_priv(netdev); 12732 int rc; 12733 12734 DP(NETIF_MSG_LINK, 12735 "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n", 12736 prtad, devad, addr, value); 12737 12738 /* The HW expects different devad if CL22 is used */ 12739 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; 12740 12741 bnx2x_acquire_phy_lock(bp); 12742 rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value); 12743 bnx2x_release_phy_lock(bp); 12744 return rc; 12745} 12746 12747/* called with rtnl_lock */ 12748static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 12749{ 12750 struct bnx2x *bp = netdev_priv(dev); 12751 struct mii_ioctl_data *mdio = if_mii(ifr); 12752 12753 if (!netif_running(dev)) 12754 return -EAGAIN; 12755 12756 switch (cmd) { 12757 case SIOCSHWTSTAMP: 12758 return bnx2x_hwtstamp_ioctl(bp, ifr); 12759 default: 12760 DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", 12761 mdio->phy_id, mdio->reg_num, mdio->val_in); 12762 return mdio_mii_ioctl(&bp->mdio, mdio, cmd); 12763 } 12764} 12765 12766#ifdef CONFIG_NET_POLL_CONTROLLER 12767static void poll_bnx2x(struct net_device *dev) 12768{ 12769 struct bnx2x *bp = netdev_priv(dev); 12770 int i; 12771 12772 for_each_eth_queue(bp, i) { 12773 struct bnx2x_fastpath *fp = &bp->fp[i]; 12774 napi_schedule(&bnx2x_fp(bp, fp->index, napi)); 12775 } 12776} 12777#endif 12778 12779static int bnx2x_validate_addr(struct net_device *dev) 12780{ 12781 struct bnx2x *bp = netdev_priv(dev); 12782 12783 /* query the bulletin board for mac address configured by the PF */ 12784 if (IS_VF(bp)) 12785 bnx2x_sample_bulletin(bp); 12786 12787 if (!is_valid_ether_addr(dev->dev_addr)) { 12788 BNX2X_ERR("Non-valid Ethernet address\n"); 12789 return -EADDRNOTAVAIL; 12790 } 12791 return 0; 12792} 12793 12794static int bnx2x_get_phys_port_id(struct net_device *netdev, 12795 struct netdev_phys_item_id *ppid) 12796{ 12797 struct bnx2x *bp = netdev_priv(netdev); 12798 12799 if (!(bp->flags & HAS_PHYS_PORT_ID)) 12800 return -EOPNOTSUPP; 12801 12802 ppid->id_len = sizeof(bp->phys_port_id); 12803 memcpy(ppid->id, bp->phys_port_id, ppid->id_len); 12804 12805 return 0; 12806} 12807 12808static netdev_features_t bnx2x_features_check(struct sk_buff *skb, 12809 struct net_device *dev, 12810 netdev_features_t features) 12811{ 12812 features = vlan_features_check(skb, features); 12813 return vxlan_features_check(skb, features); 12814} 12815 12816static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add) 12817{ 12818 int rc; 12819 12820 if (IS_PF(bp)) { 12821 unsigned long ramrod_flags = 0; 12822 12823 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 12824 rc = bnx2x_set_vlan_one(bp, vid, &bp->sp_objs->vlan_obj, 12825 add, &ramrod_flags); 12826 } else { 12827 rc = bnx2x_vfpf_update_vlan(bp, vid, bp->fp->index, add); 12828 } 12829 12830 return rc; 12831} 12832 12833int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) 12834{ 12835 struct bnx2x_vlan_entry *vlan; 12836 int rc = 0; 12837 12838 if (!bp->vlan_cnt) { 12839 DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n"); 12840 return 0; 12841 } 12842 12843 list_for_each_entry(vlan, &bp->vlan_reg, link) { 12844 /* Prepare for cleanup in case of errors */ 12845 if (rc) { 12846 vlan->hw = false; 12847 continue; 12848 } 12849 12850 if (!vlan->hw) 12851 continue; 12852 12853 DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid); 12854 12855 rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); 12856 if (rc) { 12857 BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid); 12858 vlan->hw = false; 12859 rc = -EINVAL; 12860 continue; 12861 } 12862 } 12863 12864 return rc; 12865} 12866 12867static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) 12868{ 12869 struct bnx2x *bp = netdev_priv(dev); 12870 struct bnx2x_vlan_entry *vlan; 12871 bool hw = false; 12872 int rc = 0; 12873 12874 if (!netif_running(bp->dev)) { 12875 DP(NETIF_MSG_IFUP, 12876 "Ignoring VLAN configuration the interface is down\n"); 12877 return -EFAULT; 12878 } 12879 12880 DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid); 12881 12882 vlan = kmalloc(sizeof(*vlan), GFP_KERNEL); 12883 if (!vlan) 12884 return -ENOMEM; 12885 12886 bp->vlan_cnt++; 12887 if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) { 12888 DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n"); 12889 bp->accept_any_vlan = true; 12890 if (IS_PF(bp)) 12891 bnx2x_set_rx_mode_inner(bp); 12892 else 12893 bnx2x_vfpf_storm_rx_mode(bp); 12894 } else if (bp->vlan_cnt <= bp->vlan_credit) { 12895 rc = __bnx2x_vlan_configure_vid(bp, vid, true); 12896 hw = true; 12897 } 12898 12899 vlan->vid = vid; 12900 vlan->hw = hw; 12901 12902 if (!rc) { 12903 list_add(&vlan->link, &bp->vlan_reg); 12904 } else { 12905 bp->vlan_cnt--; 12906 kfree(vlan); 12907 } 12908 12909 DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc); 12910 12911 return rc; 12912} 12913 12914static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) 12915{ 12916 struct bnx2x *bp = netdev_priv(dev); 12917 struct bnx2x_vlan_entry *vlan; 12918 int rc = 0; 12919 12920 if (!netif_running(bp->dev)) { 12921 DP(NETIF_MSG_IFUP, 12922 "Ignoring VLAN configuration the interface is down\n"); 12923 return -EFAULT; 12924 } 12925 12926 DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid); 12927 12928 if (!bp->vlan_cnt) { 12929 BNX2X_ERR("Unable to kill VLAN %d\n", vid); 12930 return -EINVAL; 12931 } 12932 12933 list_for_each_entry(vlan, &bp->vlan_reg, link) 12934 if (vlan->vid == vid) 12935 break; 12936 12937 if (vlan->vid != vid) { 12938 BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid); 12939 return -EINVAL; 12940 } 12941 12942 if (vlan->hw) 12943 rc = __bnx2x_vlan_configure_vid(bp, vid, false); 12944 12945 list_del(&vlan->link); 12946 kfree(vlan); 12947 12948 bp->vlan_cnt--; 12949 12950 if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) { 12951 /* Configure all non-configured entries */ 12952 list_for_each_entry(vlan, &bp->vlan_reg, link) { 12953 if (vlan->hw) 12954 continue; 12955 12956 rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); 12957 if (rc) { 12958 BNX2X_ERR("Unable to config VLAN %d\n", 12959 vlan->vid); 12960 continue; 12961 } 12962 DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", 12963 vlan->vid); 12964 vlan->hw = true; 12965 } 12966 DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n"); 12967 bp->accept_any_vlan = false; 12968 if (IS_PF(bp)) 12969 bnx2x_set_rx_mode_inner(bp); 12970 else 12971 bnx2x_vfpf_storm_rx_mode(bp); 12972 } 12973 12974 DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc); 12975 12976 return rc; 12977} 12978 12979static const struct net_device_ops bnx2x_netdev_ops = { 12980 .ndo_open = bnx2x_open, 12981 .ndo_stop = bnx2x_close, 12982 .ndo_start_xmit = bnx2x_start_xmit, 12983 .ndo_select_queue = bnx2x_select_queue, 12984 .ndo_set_rx_mode = bnx2x_set_rx_mode, 12985 .ndo_set_mac_address = bnx2x_change_mac_addr, 12986 .ndo_validate_addr = bnx2x_validate_addr, 12987 .ndo_do_ioctl = bnx2x_ioctl, 12988 .ndo_change_mtu = bnx2x_change_mtu, 12989 .ndo_fix_features = bnx2x_fix_features, 12990 .ndo_set_features = bnx2x_set_features, 12991 .ndo_tx_timeout = bnx2x_tx_timeout, 12992 .ndo_vlan_rx_add_vid = bnx2x_vlan_rx_add_vid, 12993 .ndo_vlan_rx_kill_vid = bnx2x_vlan_rx_kill_vid, 12994#ifdef CONFIG_NET_POLL_CONTROLLER 12995 .ndo_poll_controller = poll_bnx2x, 12996#endif 12997 .ndo_setup_tc = bnx2x_setup_tc, 12998#ifdef CONFIG_BNX2X_SRIOV 12999 .ndo_set_vf_mac = bnx2x_set_vf_mac, 13000 .ndo_set_vf_vlan = bnx2x_set_vf_vlan, 13001 .ndo_get_vf_config = bnx2x_get_vf_config, 13002#endif 13003#ifdef NETDEV_FCOE_WWNN 13004 .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, 13005#endif 13006 13007#ifdef CONFIG_NET_RX_BUSY_POLL 13008 .ndo_busy_poll = bnx2x_low_latency_recv, 13009#endif 13010 .ndo_get_phys_port_id = bnx2x_get_phys_port_id, 13011 .ndo_set_vf_link_state = bnx2x_set_vf_link_state, 13012 .ndo_features_check = bnx2x_features_check, 13013#ifdef CONFIG_BNX2X_VXLAN 13014 .ndo_add_vxlan_port = bnx2x_add_vxlan_port, 13015 .ndo_del_vxlan_port = bnx2x_del_vxlan_port, 13016#endif 13017}; 13018 13019static int bnx2x_set_coherency_mask(struct bnx2x *bp) 13020{ 13021 struct device *dev = &bp->pdev->dev; 13022 13023 if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) != 0 && 13024 dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)) != 0) { 13025 dev_err(dev, "System does not support DMA, aborting\n"); 13026 return -EIO; 13027 } 13028 13029 return 0; 13030} 13031 13032static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp) 13033{ 13034 if (bp->flags & AER_ENABLED) { 13035 pci_disable_pcie_error_reporting(bp->pdev); 13036 bp->flags &= ~AER_ENABLED; 13037 } 13038} 13039 13040static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, 13041 struct net_device *dev, unsigned long board_type) 13042{ 13043 int rc; 13044 u32 pci_cfg_dword; 13045 bool chip_is_e1x = (board_type == BCM57710 || 13046 board_type == BCM57711 || 13047 board_type == BCM57711E); 13048 13049 SET_NETDEV_DEV(dev, &pdev->dev); 13050 13051 bp->dev = dev; 13052 bp->pdev = pdev; 13053 13054 rc = pci_enable_device(pdev); 13055 if (rc) { 13056 dev_err(&bp->pdev->dev, 13057 "Cannot enable PCI device, aborting\n"); 13058 goto err_out; 13059 } 13060 13061 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { 13062 dev_err(&bp->pdev->dev, 13063 "Cannot find PCI device base address, aborting\n"); 13064 rc = -ENODEV; 13065 goto err_out_disable; 13066 } 13067 13068 if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { 13069 dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n"); 13070 rc = -ENODEV; 13071 goto err_out_disable; 13072 } 13073 13074 pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword); 13075 if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) == 13076 PCICFG_REVESION_ID_ERROR_VAL) { 13077 pr_err("PCI device error, probably due to fan failure, aborting\n"); 13078 rc = -ENODEV; 13079 goto err_out_disable; 13080 } 13081 13082 if (atomic_read(&pdev->enable_cnt) == 1) { 13083 rc = pci_request_regions(pdev, DRV_MODULE_NAME); 13084 if (rc) { 13085 dev_err(&bp->pdev->dev, 13086 "Cannot obtain PCI resources, aborting\n"); 13087 goto err_out_disable; 13088 } 13089 13090 pci_set_master(pdev); 13091 pci_save_state(pdev); 13092 } 13093 13094 if (IS_PF(bp)) { 13095 if (!pdev->pm_cap) { 13096 dev_err(&bp->pdev->dev, 13097 "Cannot find power management capability, aborting\n"); 13098 rc = -EIO; 13099 goto err_out_release; 13100 } 13101 } 13102 13103 if (!pci_is_pcie(pdev)) { 13104 dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n"); 13105 rc = -EIO; 13106 goto err_out_release; 13107 } 13108 13109 rc = bnx2x_set_coherency_mask(bp); 13110 if (rc) 13111 goto err_out_release; 13112 13113 dev->mem_start = pci_resource_start(pdev, 0); 13114 dev->base_addr = dev->mem_start; 13115 dev->mem_end = pci_resource_end(pdev, 0); 13116 13117 dev->irq = pdev->irq; 13118 13119 bp->regview = pci_ioremap_bar(pdev, 0); 13120 if (!bp->regview) { 13121 dev_err(&bp->pdev->dev, 13122 "Cannot map register space, aborting\n"); 13123 rc = -ENOMEM; 13124 goto err_out_release; 13125 } 13126 13127 /* In E1/E1H use pci device function given by kernel. 13128 * In E2/E3 read physical function from ME register since these chips 13129 * support Physical Device Assignment where kernel BDF maybe arbitrary 13130 * (depending on hypervisor). 13131 */ 13132 if (chip_is_e1x) { 13133 bp->pf_num = PCI_FUNC(pdev->devfn); 13134 } else { 13135 /* chip is E2/3*/ 13136 pci_read_config_dword(bp->pdev, 13137 PCICFG_ME_REGISTER, &pci_cfg_dword); 13138 bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >> 13139 ME_REG_ABS_PF_NUM_SHIFT); 13140 } 13141 BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num); 13142 13143 /* clean indirect addresses */ 13144 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, 13145 PCICFG_VENDOR_ID_OFFSET); 13146 13147 /* Set PCIe reset type to fundamental for EEH recovery */ 13148 pdev->needs_freset = 1; 13149 13150 /* AER (Advanced Error reporting) configuration */ 13151 rc = pci_enable_pcie_error_reporting(pdev); 13152 if (!rc) 13153 bp->flags |= AER_ENABLED; 13154 else 13155 BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc); 13156 13157 /* 13158 * Clean the following indirect addresses for all functions since it 13159 * is not used by the driver. 13160 */ 13161 if (IS_PF(bp)) { 13162 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); 13163 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); 13164 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); 13165 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); 13166 13167 if (chip_is_e1x) { 13168 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); 13169 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); 13170 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); 13171 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); 13172 } 13173 13174 /* Enable internal target-read (in case we are probed after PF 13175 * FLR). Must be done prior to any BAR read access. Only for 13176 * 57712 and up 13177 */ 13178 if (!chip_is_e1x) 13179 REG_WR(bp, 13180 PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); 13181 } 13182 13183 dev->watchdog_timeo = TX_TIMEOUT; 13184 13185 dev->netdev_ops = &bnx2x_netdev_ops; 13186 bnx2x_set_ethtool_ops(bp, dev); 13187 13188 dev->priv_flags |= IFF_UNICAST_FLT; 13189 13190 dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | 13191 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | 13192 NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | 13193 NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX; 13194 if (!chip_is_e1x) { 13195 dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL | 13196 NETIF_F_GSO_IPIP | NETIF_F_GSO_SIT; 13197 dev->hw_enc_features = 13198 NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG | 13199 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | 13200 NETIF_F_GSO_IPIP | 13201 NETIF_F_GSO_SIT | 13202 NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL; 13203 } 13204 13205 dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | 13206 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; 13207 13208 /* VF with OLD Hypervisor or old PF do not support filtering */ 13209 if (IS_PF(bp)) { 13210 if (chip_is_e1x) 13211 bp->accept_any_vlan = true; 13212 else 13213 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; 13214#ifdef CONFIG_BNX2X_SRIOV 13215 } else if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) { 13216 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; 13217#endif 13218 } 13219 13220 dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; 13221 dev->features |= NETIF_F_HIGHDMA; 13222 13223 /* Add Loopback capability to the device */ 13224 dev->hw_features |= NETIF_F_LOOPBACK; 13225 13226#ifdef BCM_DCBNL 13227 dev->dcbnl_ops = &bnx2x_dcbnl_ops; 13228#endif 13229 13230 /* get_port_hwinfo() will set prtad and mmds properly */ 13231 bp->mdio.prtad = MDIO_PRTAD_NONE; 13232 bp->mdio.mmds = 0; 13233 bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; 13234 bp->mdio.dev = dev; 13235 bp->mdio.mdio_read = bnx2x_mdio_read; 13236 bp->mdio.mdio_write = bnx2x_mdio_write; 13237 13238 return 0; 13239 13240err_out_release: 13241 if (atomic_read(&pdev->enable_cnt) == 1) 13242 pci_release_regions(pdev); 13243 13244err_out_disable: 13245 pci_disable_device(pdev); 13246 13247err_out: 13248 return rc; 13249} 13250 13251static int bnx2x_check_firmware(struct bnx2x *bp) 13252{ 13253 const struct firmware *firmware = bp->firmware; 13254 struct bnx2x_fw_file_hdr *fw_hdr; 13255 struct bnx2x_fw_file_section *sections; 13256 u32 offset, len, num_ops; 13257 __be16 *ops_offsets; 13258 int i; 13259 const u8 *fw_ver; 13260 13261 if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) { 13262 BNX2X_ERR("Wrong FW size\n"); 13263 return -EINVAL; 13264 } 13265 13266 fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data; 13267 sections = (struct bnx2x_fw_file_section *)fw_hdr; 13268 13269 /* Make sure none of the offsets and sizes make us read beyond 13270 * the end of the firmware data */ 13271 for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) { 13272 offset = be32_to_cpu(sections[i].offset); 13273 len = be32_to_cpu(sections[i].len); 13274 if (offset + len > firmware->size) { 13275 BNX2X_ERR("Section %d length is out of bounds\n", i); 13276 return -EINVAL; 13277 } 13278 } 13279 13280 /* Likewise for the init_ops offsets */ 13281 offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); 13282 ops_offsets = (__force __be16 *)(firmware->data + offset); 13283 num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); 13284 13285 for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { 13286 if (be16_to_cpu(ops_offsets[i]) > num_ops) { 13287 BNX2X_ERR("Section offset %d is out of bounds\n", i); 13288 return -EINVAL; 13289 } 13290 } 13291 13292 /* Check FW version */ 13293 offset = be32_to_cpu(fw_hdr->fw_version.offset); 13294 fw_ver = firmware->data + offset; 13295 if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) || 13296 (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || 13297 (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || 13298 (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { 13299 BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n", 13300 fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3], 13301 BCM_5710_FW_MAJOR_VERSION, 13302 BCM_5710_FW_MINOR_VERSION, 13303 BCM_5710_FW_REVISION_VERSION, 13304 BCM_5710_FW_ENGINEERING_VERSION); 13305 return -EINVAL; 13306 } 13307 13308 return 0; 13309} 13310 13311static void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) 13312{ 13313 const __be32 *source = (const __be32 *)_source; 13314 u32 *target = (u32 *)_target; 13315 u32 i; 13316 13317 for (i = 0; i < n/4; i++) 13318 target[i] = be32_to_cpu(source[i]); 13319} 13320 13321/* 13322 Ops array is stored in the following format: 13323 {op(8bit), offset(24bit, big endian), data(32bit, big endian)} 13324 */ 13325static void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) 13326{ 13327 const __be32 *source = (const __be32 *)_source; 13328 struct raw_op *target = (struct raw_op *)_target; 13329 u32 i, j, tmp; 13330 13331 for (i = 0, j = 0; i < n/8; i++, j += 2) { 13332 tmp = be32_to_cpu(source[j]); 13333 target[i].op = (tmp >> 24) & 0xff; 13334 target[i].offset = tmp & 0xffffff; 13335 target[i].raw_data = be32_to_cpu(source[j + 1]); 13336 } 13337} 13338 13339/* IRO array is stored in the following format: 13340 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) } 13341 */ 13342static void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n) 13343{ 13344 const __be32 *source = (const __be32 *)_source; 13345 struct iro *target = (struct iro *)_target; 13346 u32 i, j, tmp; 13347 13348 for (i = 0, j = 0; i < n/sizeof(struct iro); i++) { 13349 target[i].base = be32_to_cpu(source[j]); 13350 j++; 13351 tmp = be32_to_cpu(source[j]); 13352 target[i].m1 = (tmp >> 16) & 0xffff; 13353 target[i].m2 = tmp & 0xffff; 13354 j++; 13355 tmp = be32_to_cpu(source[j]); 13356 target[i].m3 = (tmp >> 16) & 0xffff; 13357 target[i].size = tmp & 0xffff; 13358 j++; 13359 } 13360} 13361 13362static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) 13363{ 13364 const __be16 *source = (const __be16 *)_source; 13365 u16 *target = (u16 *)_target; 13366 u32 i; 13367 13368 for (i = 0; i < n/2; i++) 13369 target[i] = be16_to_cpu(source[i]); 13370} 13371 13372#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ 13373do { \ 13374 u32 len = be32_to_cpu(fw_hdr->arr.len); \ 13375 bp->arr = kmalloc(len, GFP_KERNEL); \ 13376 if (!bp->arr) \ 13377 goto lbl; \ 13378 func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ 13379 (u8 *)bp->arr, len); \ 13380} while (0) 13381 13382static int bnx2x_init_firmware(struct bnx2x *bp) 13383{ 13384 const char *fw_file_name; 13385 struct bnx2x_fw_file_hdr *fw_hdr; 13386 int rc; 13387 13388 if (bp->firmware) 13389 return 0; 13390 13391 if (CHIP_IS_E1(bp)) 13392 fw_file_name = FW_FILE_NAME_E1; 13393 else if (CHIP_IS_E1H(bp)) 13394 fw_file_name = FW_FILE_NAME_E1H; 13395 else if (!CHIP_IS_E1x(bp)) 13396 fw_file_name = FW_FILE_NAME_E2; 13397 else { 13398 BNX2X_ERR("Unsupported chip revision\n"); 13399 return -EINVAL; 13400 } 13401 BNX2X_DEV_INFO("Loading %s\n", fw_file_name); 13402 13403 rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); 13404 if (rc) { 13405 BNX2X_ERR("Can't load firmware file %s\n", 13406 fw_file_name); 13407 goto request_firmware_exit; 13408 } 13409 13410 rc = bnx2x_check_firmware(bp); 13411 if (rc) { 13412 BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); 13413 goto request_firmware_exit; 13414 } 13415 13416 fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; 13417 13418 /* Initialize the pointers to the init arrays */ 13419 /* Blob */ 13420 BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n); 13421 13422 /* Opcodes */ 13423 BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); 13424 13425 /* Offsets */ 13426 BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, 13427 be16_to_cpu_n); 13428 13429 /* STORMs firmware */ 13430 INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13431 be32_to_cpu(fw_hdr->tsem_int_table_data.offset); 13432 INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data + 13433 be32_to_cpu(fw_hdr->tsem_pram_data.offset); 13434 INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13435 be32_to_cpu(fw_hdr->usem_int_table_data.offset); 13436 INIT_USEM_PRAM_DATA(bp) = bp->firmware->data + 13437 be32_to_cpu(fw_hdr->usem_pram_data.offset); 13438 INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13439 be32_to_cpu(fw_hdr->xsem_int_table_data.offset); 13440 INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data + 13441 be32_to_cpu(fw_hdr->xsem_pram_data.offset); 13442 INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13443 be32_to_cpu(fw_hdr->csem_int_table_data.offset); 13444 INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data + 13445 be32_to_cpu(fw_hdr->csem_pram_data.offset); 13446 /* IRO */ 13447 BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro); 13448 13449 return 0; 13450 13451iro_alloc_err: 13452 kfree(bp->init_ops_offsets); 13453init_offsets_alloc_err: 13454 kfree(bp->init_ops); 13455init_ops_alloc_err: 13456 kfree(bp->init_data); 13457request_firmware_exit: 13458 release_firmware(bp->firmware); 13459 bp->firmware = NULL; 13460 13461 return rc; 13462} 13463 13464static void bnx2x_release_firmware(struct bnx2x *bp) 13465{ 13466 kfree(bp->init_ops_offsets); 13467 kfree(bp->init_ops); 13468 kfree(bp->init_data); 13469 release_firmware(bp->firmware); 13470 bp->firmware = NULL; 13471} 13472 13473static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = { 13474 .init_hw_cmn_chip = bnx2x_init_hw_common_chip, 13475 .init_hw_cmn = bnx2x_init_hw_common, 13476 .init_hw_port = bnx2x_init_hw_port, 13477 .init_hw_func = bnx2x_init_hw_func, 13478 13479 .reset_hw_cmn = bnx2x_reset_common, 13480 .reset_hw_port = bnx2x_reset_port, 13481 .reset_hw_func = bnx2x_reset_func, 13482 13483 .gunzip_init = bnx2x_gunzip_init, 13484 .gunzip_end = bnx2x_gunzip_end, 13485 13486 .init_fw = bnx2x_init_firmware, 13487 .release_fw = bnx2x_release_firmware, 13488}; 13489 13490void bnx2x__init_func_obj(struct bnx2x *bp) 13491{ 13492 /* Prepare DMAE related driver resources */ 13493 bnx2x_setup_dmae(bp); 13494 13495 bnx2x_init_func_obj(bp, &bp->func_obj, 13496 bnx2x_sp(bp, func_rdata), 13497 bnx2x_sp_mapping(bp, func_rdata), 13498 bnx2x_sp(bp, func_afex_rdata), 13499 bnx2x_sp_mapping(bp, func_afex_rdata), 13500 &bnx2x_func_sp_drv); 13501} 13502 13503/* must be called after sriov-enable */ 13504static int bnx2x_set_qm_cid_count(struct bnx2x *bp) 13505{ 13506 int cid_count = BNX2X_L2_MAX_CID(bp); 13507 13508 if (IS_SRIOV(bp)) 13509 cid_count += BNX2X_VF_CIDS; 13510 13511 if (CNIC_SUPPORT(bp)) 13512 cid_count += CNIC_CID_MAX; 13513 13514 return roundup(cid_count, QM_CID_ROUND); 13515} 13516 13517/** 13518 * bnx2x_get_num_none_def_sbs - return the number of none default SBs 13519 * 13520 * @dev: pci device 13521 * 13522 */ 13523static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt) 13524{ 13525 int index; 13526 u16 control = 0; 13527 13528 /* 13529 * If MSI-X is not supported - return number of SBs needed to support 13530 * one fast path queue: one FP queue + SB for CNIC 13531 */ 13532 if (!pdev->msix_cap) { 13533 dev_info(&pdev->dev, "no msix capability found\n"); 13534 return 1 + cnic_cnt; 13535 } 13536 dev_info(&pdev->dev, "msix capability found\n"); 13537 13538 /* 13539 * The value in the PCI configuration space is the index of the last 13540 * entry, namely one less than the actual size of the table, which is 13541 * exactly what we want to return from this function: number of all SBs 13542 * without the default SB. 13543 * For VFs there is no default SB, then we return (index+1). 13544 */ 13545 pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control); 13546 13547 index = control & PCI_MSIX_FLAGS_QSIZE; 13548 13549 return index; 13550} 13551 13552static int set_max_cos_est(int chip_id) 13553{ 13554 switch (chip_id) { 13555 case BCM57710: 13556 case BCM57711: 13557 case BCM57711E: 13558 return BNX2X_MULTI_TX_COS_E1X; 13559 case BCM57712: 13560 case BCM57712_MF: 13561 return BNX2X_MULTI_TX_COS_E2_E3A0; 13562 case BCM57800: 13563 case BCM57800_MF: 13564 case BCM57810: 13565 case BCM57810_MF: 13566 case BCM57840_4_10: 13567 case BCM57840_2_20: 13568 case BCM57840_O: 13569 case BCM57840_MFO: 13570 case BCM57840_MF: 13571 case BCM57811: 13572 case BCM57811_MF: 13573 return BNX2X_MULTI_TX_COS_E3B0; 13574 case BCM57712_VF: 13575 case BCM57800_VF: 13576 case BCM57810_VF: 13577 case BCM57840_VF: 13578 case BCM57811_VF: 13579 return 1; 13580 default: 13581 pr_err("Unknown board_type (%d), aborting\n", chip_id); 13582 return -ENODEV; 13583 } 13584} 13585 13586static int set_is_vf(int chip_id) 13587{ 13588 switch (chip_id) { 13589 case BCM57712_VF: 13590 case BCM57800_VF: 13591 case BCM57810_VF: 13592 case BCM57840_VF: 13593 case BCM57811_VF: 13594 return true; 13595 default: 13596 return false; 13597 } 13598} 13599 13600/* nig_tsgen registers relative address */ 13601#define tsgen_ctrl 0x0 13602#define tsgen_freecount 0x10 13603#define tsgen_synctime_t0 0x20 13604#define tsgen_offset_t0 0x28 13605#define tsgen_drift_t0 0x30 13606#define tsgen_synctime_t1 0x58 13607#define tsgen_offset_t1 0x60 13608#define tsgen_drift_t1 0x68 13609 13610/* FW workaround for setting drift */ 13611static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir, 13612 int best_val, int best_period) 13613{ 13614 struct bnx2x_func_state_params func_params = {NULL}; 13615 struct bnx2x_func_set_timesync_params *set_timesync_params = 13616 &func_params.params.set_timesync; 13617 13618 /* Prepare parameters for function state transitions */ 13619 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 13620 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 13621 13622 func_params.f_obj = &bp->func_obj; 13623 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; 13624 13625 /* Function parameters */ 13626 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET; 13627 set_timesync_params->offset_cmd = TS_OFFSET_KEEP; 13628 set_timesync_params->add_sub_drift_adjust_value = 13629 drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE; 13630 set_timesync_params->drift_adjust_value = best_val; 13631 set_timesync_params->drift_adjust_period = best_period; 13632 13633 return bnx2x_func_state_change(bp, &func_params); 13634} 13635 13636static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) 13637{ 13638 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13639 int rc; 13640 int drift_dir = 1; 13641 int val, period, period1, period2, dif, dif1, dif2; 13642 int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0; 13643 13644 DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb); 13645 13646 if (!netif_running(bp->dev)) { 13647 DP(BNX2X_MSG_PTP, 13648 "PTP adjfreq called while the interface is down\n"); 13649 return -EFAULT; 13650 } 13651 13652 if (ppb < 0) { 13653 ppb = -ppb; 13654 drift_dir = 0; 13655 } 13656 13657 if (ppb == 0) { 13658 best_val = 1; 13659 best_period = 0x1FFFFFF; 13660 } else if (ppb >= BNX2X_MAX_PHC_DRIFT) { 13661 best_val = 31; 13662 best_period = 1; 13663 } else { 13664 /* Changed not to allow val = 8, 16, 24 as these values 13665 * are not supported in workaround. 13666 */ 13667 for (val = 0; val <= 31; val++) { 13668 if ((val & 0x7) == 0) 13669 continue; 13670 period1 = val * 1000000 / ppb; 13671 period2 = period1 + 1; 13672 if (period1 != 0) 13673 dif1 = ppb - (val * 1000000 / period1); 13674 else 13675 dif1 = BNX2X_MAX_PHC_DRIFT; 13676 if (dif1 < 0) 13677 dif1 = -dif1; 13678 dif2 = ppb - (val * 1000000 / period2); 13679 if (dif2 < 0) 13680 dif2 = -dif2; 13681 dif = (dif1 < dif2) ? dif1 : dif2; 13682 period = (dif1 < dif2) ? period1 : period2; 13683 if (dif < best_dif) { 13684 best_dif = dif; 13685 best_val = val; 13686 best_period = period; 13687 } 13688 } 13689 } 13690 13691 rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val, 13692 best_period); 13693 if (rc) { 13694 BNX2X_ERR("Failed to set drift\n"); 13695 return -EFAULT; 13696 } 13697 13698 DP(BNX2X_MSG_PTP, "Configured val = %d, period = %d\n", best_val, 13699 best_period); 13700 13701 return 0; 13702} 13703 13704static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) 13705{ 13706 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13707 13708 DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta); 13709 13710 timecounter_adjtime(&bp->timecounter, delta); 13711 13712 return 0; 13713} 13714 13715static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) 13716{ 13717 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13718 u64 ns; 13719 13720 ns = timecounter_read(&bp->timecounter); 13721 13722 DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns); 13723 13724 *ts = ns_to_timespec64(ns); 13725 13726 return 0; 13727} 13728 13729static int bnx2x_ptp_settime(struct ptp_clock_info *ptp, 13730 const struct timespec64 *ts) 13731{ 13732 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13733 u64 ns; 13734 13735 ns = timespec64_to_ns(ts); 13736 13737 DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns); 13738 13739 /* Re-init the timecounter */ 13740 timecounter_init(&bp->timecounter, &bp->cyclecounter, ns); 13741 13742 return 0; 13743} 13744 13745/* Enable (or disable) ancillary features of the phc subsystem */ 13746static int bnx2x_ptp_enable(struct ptp_clock_info *ptp, 13747 struct ptp_clock_request *rq, int on) 13748{ 13749 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13750 13751 BNX2X_ERR("PHC ancillary features are not supported\n"); 13752 return -ENOTSUPP; 13753} 13754 13755static void bnx2x_register_phc(struct bnx2x *bp) 13756{ 13757 /* Fill the ptp_clock_info struct and register PTP clock*/ 13758 bp->ptp_clock_info.owner = THIS_MODULE; 13759 snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name); 13760 bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */ 13761 bp->ptp_clock_info.n_alarm = 0; 13762 bp->ptp_clock_info.n_ext_ts = 0; 13763 bp->ptp_clock_info.n_per_out = 0; 13764 bp->ptp_clock_info.pps = 0; 13765 bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq; 13766 bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime; 13767 bp->ptp_clock_info.gettime64 = bnx2x_ptp_gettime; 13768 bp->ptp_clock_info.settime64 = bnx2x_ptp_settime; 13769 bp->ptp_clock_info.enable = bnx2x_ptp_enable; 13770 13771 bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev); 13772 if (IS_ERR(bp->ptp_clock)) { 13773 bp->ptp_clock = NULL; 13774 BNX2X_ERR("PTP clock registeration failed\n"); 13775 } 13776} 13777 13778static int bnx2x_init_one(struct pci_dev *pdev, 13779 const struct pci_device_id *ent) 13780{ 13781 struct net_device *dev = NULL; 13782 struct bnx2x *bp; 13783 enum pcie_link_width pcie_width; 13784 enum pci_bus_speed pcie_speed; 13785 int rc, max_non_def_sbs; 13786 int rx_count, tx_count, rss_count, doorbell_size; 13787 int max_cos_est; 13788 bool is_vf; 13789 int cnic_cnt; 13790 13791 /* Management FW 'remembers' living interfaces. Allow it some time 13792 * to forget previously living interfaces, allowing a proper re-load. 13793 */ 13794 if (is_kdump_kernel()) { 13795 ktime_t now = ktime_get_boottime(); 13796 ktime_t fw_ready_time = ktime_set(5, 0); 13797 13798 if (ktime_before(now, fw_ready_time)) 13799 msleep(ktime_ms_delta(fw_ready_time, now)); 13800 } 13801 13802 /* An estimated maximum supported CoS number according to the chip 13803 * version. 13804 * We will try to roughly estimate the maximum number of CoSes this chip 13805 * may support in order to minimize the memory allocated for Tx 13806 * netdev_queue's. This number will be accurately calculated during the 13807 * initialization of bp->max_cos based on the chip versions AND chip 13808 * revision in the bnx2x_init_bp(). 13809 */ 13810 max_cos_est = set_max_cos_est(ent->driver_data); 13811 if (max_cos_est < 0) 13812 return max_cos_est; 13813 is_vf = set_is_vf(ent->driver_data); 13814 cnic_cnt = is_vf ? 0 : 1; 13815 13816 max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt); 13817 13818 /* add another SB for VF as it has no default SB */ 13819 max_non_def_sbs += is_vf ? 1 : 0; 13820 13821 /* Maximum number of RSS queues: one IGU SB goes to CNIC */ 13822 rss_count = max_non_def_sbs - cnic_cnt; 13823 13824 if (rss_count < 1) 13825 return -EINVAL; 13826 13827 /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ 13828 rx_count = rss_count + cnic_cnt; 13829 13830 /* Maximum number of netdev Tx queues: 13831 * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 13832 */ 13833 tx_count = rss_count * max_cos_est + cnic_cnt; 13834 13835 /* dev zeroed in init_etherdev */ 13836 dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count); 13837 if (!dev) 13838 return -ENOMEM; 13839 13840 bp = netdev_priv(dev); 13841 13842 bp->flags = 0; 13843 if (is_vf) 13844 bp->flags |= IS_VF_FLAG; 13845 13846 bp->igu_sb_cnt = max_non_def_sbs; 13847 bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM; 13848 bp->msg_enable = debug; 13849 bp->cnic_support = cnic_cnt; 13850 bp->cnic_probe = bnx2x_cnic_probe; 13851 13852 pci_set_drvdata(pdev, dev); 13853 13854 rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data); 13855 if (rc < 0) { 13856 free_netdev(dev); 13857 return rc; 13858 } 13859 13860 BNX2X_DEV_INFO("This is a %s function\n", 13861 IS_PF(bp) ? "physical" : "virtual"); 13862 BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); 13863 BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); 13864 BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", 13865 tx_count, rx_count); 13866 13867 rc = bnx2x_init_bp(bp); 13868 if (rc) 13869 goto init_one_exit; 13870 13871 /* Map doorbells here as we need the real value of bp->max_cos which 13872 * is initialized in bnx2x_init_bp() to determine the number of 13873 * l2 connections. 13874 */ 13875 if (IS_VF(bp)) { 13876 bp->doorbells = bnx2x_vf_doorbells(bp); 13877 rc = bnx2x_vf_pci_alloc(bp); 13878 if (rc) 13879 goto init_one_exit; 13880 } else { 13881 doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); 13882 if (doorbell_size > pci_resource_len(pdev, 2)) { 13883 dev_err(&bp->pdev->dev, 13884 "Cannot map doorbells, bar size too small, aborting\n"); 13885 rc = -ENOMEM; 13886 goto init_one_exit; 13887 } 13888 bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), 13889 doorbell_size); 13890 } 13891 if (!bp->doorbells) { 13892 dev_err(&bp->pdev->dev, 13893 "Cannot map doorbell space, aborting\n"); 13894 rc = -ENOMEM; 13895 goto init_one_exit; 13896 } 13897 13898 if (IS_VF(bp)) { 13899 rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count); 13900 if (rc) 13901 goto init_one_exit; 13902 } 13903 13904 /* Enable SRIOV if capability found in configuration space */ 13905 rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS); 13906 if (rc) 13907 goto init_one_exit; 13908 13909 /* calc qm_cid_count */ 13910 bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); 13911 BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); 13912 13913 /* disable FCOE L2 queue for E1x*/ 13914 if (CHIP_IS_E1x(bp)) 13915 bp->flags |= NO_FCOE_FLAG; 13916 13917 /* Set bp->num_queues for MSI-X mode*/ 13918 bnx2x_set_num_queues(bp); 13919 13920 /* Configure interrupt mode: try to enable MSI-X/MSI if 13921 * needed. 13922 */ 13923 rc = bnx2x_set_int_mode(bp); 13924 if (rc) { 13925 dev_err(&pdev->dev, "Cannot set interrupts\n"); 13926 goto init_one_exit; 13927 } 13928 BNX2X_DEV_INFO("set interrupts successfully\n"); 13929 13930 /* register the net device */ 13931 rc = register_netdev(dev); 13932 if (rc) { 13933 dev_err(&pdev->dev, "Cannot register net device\n"); 13934 goto init_one_exit; 13935 } 13936 BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name); 13937 13938 if (!NO_FCOE(bp)) { 13939 /* Add storage MAC address */ 13940 rtnl_lock(); 13941 dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); 13942 rtnl_unlock(); 13943 } 13944 if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) || 13945 pcie_speed == PCI_SPEED_UNKNOWN || 13946 pcie_width == PCIE_LNK_WIDTH_UNKNOWN) 13947 BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n"); 13948 else 13949 BNX2X_DEV_INFO( 13950 "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", 13951 board_info[ent->driver_data].name, 13952 (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), 13953 pcie_width, 13954 pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" : 13955 pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" : 13956 pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" : 13957 "Unknown", 13958 dev->base_addr, bp->pdev->irq, dev->dev_addr); 13959 13960 bnx2x_register_phc(bp); 13961 13962 if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) 13963 bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED); 13964 13965 return 0; 13966 13967init_one_exit: 13968 bnx2x_disable_pcie_error_reporting(bp); 13969 13970 if (bp->regview) 13971 iounmap(bp->regview); 13972 13973 if (IS_PF(bp) && bp->doorbells) 13974 iounmap(bp->doorbells); 13975 13976 free_netdev(dev); 13977 13978 if (atomic_read(&pdev->enable_cnt) == 1) 13979 pci_release_regions(pdev); 13980 13981 pci_disable_device(pdev); 13982 13983 return rc; 13984} 13985 13986static void __bnx2x_remove(struct pci_dev *pdev, 13987 struct net_device *dev, 13988 struct bnx2x *bp, 13989 bool remove_netdev) 13990{ 13991 if (bp->ptp_clock) { 13992 ptp_clock_unregister(bp->ptp_clock); 13993 bp->ptp_clock = NULL; 13994 } 13995 13996 /* Delete storage MAC address */ 13997 if (!NO_FCOE(bp)) { 13998 rtnl_lock(); 13999 dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); 14000 rtnl_unlock(); 14001 } 14002 14003#ifdef BCM_DCBNL 14004 /* Delete app tlvs from dcbnl */ 14005 bnx2x_dcbnl_update_applist(bp, true); 14006#endif 14007 14008 if (IS_PF(bp) && 14009 !BP_NOMCP(bp) && 14010 (bp->flags & BC_SUPPORTS_RMMOD_CMD)) 14011 bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0); 14012 14013 /* Close the interface - either directly or implicitly */ 14014 if (remove_netdev) { 14015 unregister_netdev(dev); 14016 } else { 14017 rtnl_lock(); 14018 dev_close(dev); 14019 rtnl_unlock(); 14020 } 14021 14022 bnx2x_iov_remove_one(bp); 14023 14024 /* Power on: we can't let PCI layer write to us while we are in D3 */ 14025 if (IS_PF(bp)) { 14026 bnx2x_set_power_state(bp, PCI_D0); 14027 bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED); 14028 14029 /* Set endianity registers to reset values in case next driver 14030 * boots in different endianty environment. 14031 */ 14032 bnx2x_reset_endianity(bp); 14033 } 14034 14035 /* Disable MSI/MSI-X */ 14036 bnx2x_disable_msi(bp); 14037 14038 /* Power off */ 14039 if (IS_PF(bp)) 14040 bnx2x_set_power_state(bp, PCI_D3hot); 14041 14042 /* Make sure RESET task is not scheduled before continuing */ 14043 cancel_delayed_work_sync(&bp->sp_rtnl_task); 14044 14045 /* send message via vfpf channel to release the resources of this vf */ 14046 if (IS_VF(bp)) 14047 bnx2x_vfpf_release(bp); 14048 14049 /* Assumes no further PCIe PM changes will occur */ 14050 if (system_state == SYSTEM_POWER_OFF) { 14051 pci_wake_from_d3(pdev, bp->wol); 14052 pci_set_power_state(pdev, PCI_D3hot); 14053 } 14054 14055 bnx2x_disable_pcie_error_reporting(bp); 14056 if (remove_netdev) { 14057 if (bp->regview) 14058 iounmap(bp->regview); 14059 14060 /* For vfs, doorbells are part of the regview and were unmapped 14061 * along with it. FW is only loaded by PF. 14062 */ 14063 if (IS_PF(bp)) { 14064 if (bp->doorbells) 14065 iounmap(bp->doorbells); 14066 14067 bnx2x_release_firmware(bp); 14068 } else { 14069 bnx2x_vf_pci_dealloc(bp); 14070 } 14071 bnx2x_free_mem_bp(bp); 14072 14073 free_netdev(dev); 14074 14075 if (atomic_read(&pdev->enable_cnt) == 1) 14076 pci_release_regions(pdev); 14077 14078 pci_disable_device(pdev); 14079 } 14080} 14081 14082static void bnx2x_remove_one(struct pci_dev *pdev) 14083{ 14084 struct net_device *dev = pci_get_drvdata(pdev); 14085 struct bnx2x *bp; 14086 14087 if (!dev) { 14088 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); 14089 return; 14090 } 14091 bp = netdev_priv(dev); 14092 14093 __bnx2x_remove(pdev, dev, bp, true); 14094} 14095 14096static int bnx2x_eeh_nic_unload(struct bnx2x *bp) 14097{ 14098 bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; 14099 14100 bp->rx_mode = BNX2X_RX_MODE_NONE; 14101 14102 if (CNIC_LOADED(bp)) 14103 bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); 14104 14105 /* Stop Tx */ 14106 bnx2x_tx_disable(bp); 14107 /* Delete all NAPI objects */ 14108 bnx2x_del_all_napi(bp); 14109 if (CNIC_LOADED(bp)) 14110 bnx2x_del_all_napi_cnic(bp); 14111 netdev_reset_tc(bp->dev); 14112 14113 del_timer_sync(&bp->timer); 14114 cancel_delayed_work_sync(&bp->sp_task); 14115 cancel_delayed_work_sync(&bp->period_task); 14116 14117 if (!down_timeout(&bp->stats_lock, HZ / 10)) { 14118 bp->stats_state = STATS_STATE_DISABLED; 14119 up(&bp->stats_lock); 14120 } 14121 14122 bnx2x_save_statistics(bp); 14123 14124 netif_carrier_off(bp->dev); 14125 14126 return 0; 14127} 14128 14129/** 14130 * bnx2x_io_error_detected - called when PCI error is detected 14131 * @pdev: Pointer to PCI device 14132 * @state: The current pci connection state 14133 * 14134 * This function is called after a PCI bus error affecting 14135 * this device has been detected. 14136 */ 14137static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev, 14138 pci_channel_state_t state) 14139{ 14140 struct net_device *dev = pci_get_drvdata(pdev); 14141 struct bnx2x *bp = netdev_priv(dev); 14142 14143 rtnl_lock(); 14144 14145 BNX2X_ERR("IO error detected\n"); 14146 14147 netif_device_detach(dev); 14148 14149 if (state == pci_channel_io_perm_failure) { 14150 rtnl_unlock(); 14151 return PCI_ERS_RESULT_DISCONNECT; 14152 } 14153 14154 if (netif_running(dev)) 14155 bnx2x_eeh_nic_unload(bp); 14156 14157 bnx2x_prev_path_mark_eeh(bp); 14158 14159 pci_disable_device(pdev); 14160 14161 rtnl_unlock(); 14162 14163 /* Request a slot reset */ 14164 return PCI_ERS_RESULT_NEED_RESET; 14165} 14166 14167/** 14168 * bnx2x_io_slot_reset - called after the PCI bus has been reset 14169 * @pdev: Pointer to PCI device 14170 * 14171 * Restart the card from scratch, as if from a cold-boot. 14172 */ 14173static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) 14174{ 14175 struct net_device *dev = pci_get_drvdata(pdev); 14176 struct bnx2x *bp = netdev_priv(dev); 14177 int i; 14178 14179 rtnl_lock(); 14180 BNX2X_ERR("IO slot reset initializing...\n"); 14181 if (pci_enable_device(pdev)) { 14182 dev_err(&pdev->dev, 14183 "Cannot re-enable PCI device after reset\n"); 14184 rtnl_unlock(); 14185 return PCI_ERS_RESULT_DISCONNECT; 14186 } 14187 14188 pci_set_master(pdev); 14189 pci_restore_state(pdev); 14190 pci_save_state(pdev); 14191 14192 if (netif_running(dev)) 14193 bnx2x_set_power_state(bp, PCI_D0); 14194 14195 if (netif_running(dev)) { 14196 BNX2X_ERR("IO slot reset --> driver unload\n"); 14197 14198 /* MCP should have been reset; Need to wait for validity */ 14199 bnx2x_init_shmem(bp); 14200 14201 if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { 14202 u32 v; 14203 14204 v = SHMEM2_RD(bp, 14205 drv_capabilities_flag[BP_FW_MB_IDX(bp)]); 14206 SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], 14207 v & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); 14208 } 14209 bnx2x_drain_tx_queues(bp); 14210 bnx2x_send_unload_req(bp, UNLOAD_RECOVERY); 14211 bnx2x_netif_stop(bp, 1); 14212 bnx2x_free_irq(bp); 14213 14214 /* Report UNLOAD_DONE to MCP */ 14215 bnx2x_send_unload_done(bp, true); 14216 14217 bp->sp_state = 0; 14218 bp->port.pmf = 0; 14219 14220 bnx2x_prev_unload(bp); 14221 14222 /* We should have reseted the engine, so It's fair to 14223 * assume the FW will no longer write to the bnx2x driver. 14224 */ 14225 bnx2x_squeeze_objects(bp); 14226 bnx2x_free_skbs(bp); 14227 for_each_rx_queue(bp, i) 14228 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); 14229 bnx2x_free_fp_mem(bp); 14230 bnx2x_free_mem(bp); 14231 14232 bp->state = BNX2X_STATE_CLOSED; 14233 } 14234 14235 rtnl_unlock(); 14236 14237 /* If AER, perform cleanup of the PCIe registers */ 14238 if (bp->flags & AER_ENABLED) { 14239 if (pci_cleanup_aer_uncorrect_error_status(pdev)) 14240 BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n"); 14241 else 14242 DP(NETIF_MSG_HW, "pci_cleanup_aer_uncorrect_error_status succeeded\n"); 14243 } 14244 14245 return PCI_ERS_RESULT_RECOVERED; 14246} 14247 14248/** 14249 * bnx2x_io_resume - called when traffic can start flowing again 14250 * @pdev: Pointer to PCI device 14251 * 14252 * This callback is called when the error recovery driver tells us that 14253 * its OK to resume normal operation. 14254 */ 14255static void bnx2x_io_resume(struct pci_dev *pdev) 14256{ 14257 struct net_device *dev = pci_get_drvdata(pdev); 14258 struct bnx2x *bp = netdev_priv(dev); 14259 14260 if (bp->recovery_state != BNX2X_RECOVERY_DONE) { 14261 netdev_err(bp->dev, "Handling parity error recovery. Try again later\n"); 14262 return; 14263 } 14264 14265 rtnl_lock(); 14266 14267 bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & 14268 DRV_MSG_SEQ_NUMBER_MASK; 14269 14270 if (netif_running(dev)) 14271 bnx2x_nic_load(bp, LOAD_NORMAL); 14272 14273 netif_device_attach(dev); 14274 14275 rtnl_unlock(); 14276} 14277 14278static const struct pci_error_handlers bnx2x_err_handler = { 14279 .error_detected = bnx2x_io_error_detected, 14280 .slot_reset = bnx2x_io_slot_reset, 14281 .resume = bnx2x_io_resume, 14282}; 14283 14284static void bnx2x_shutdown(struct pci_dev *pdev) 14285{ 14286 struct net_device *dev = pci_get_drvdata(pdev); 14287 struct bnx2x *bp; 14288 14289 if (!dev) 14290 return; 14291 14292 bp = netdev_priv(dev); 14293 if (!bp) 14294 return; 14295 14296 rtnl_lock(); 14297 netif_device_detach(dev); 14298 rtnl_unlock(); 14299 14300 /* Don't remove the netdevice, as there are scenarios which will cause 14301 * the kernel to hang, e.g., when trying to remove bnx2i while the 14302 * rootfs is mounted from SAN. 14303 */ 14304 __bnx2x_remove(pdev, dev, bp, false); 14305} 14306 14307static struct pci_driver bnx2x_pci_driver = { 14308 .name = DRV_MODULE_NAME, 14309 .id_table = bnx2x_pci_tbl, 14310 .probe = bnx2x_init_one, 14311 .remove = bnx2x_remove_one, 14312 .suspend = bnx2x_suspend, 14313 .resume = bnx2x_resume, 14314 .err_handler = &bnx2x_err_handler, 14315#ifdef CONFIG_BNX2X_SRIOV 14316 .sriov_configure = bnx2x_sriov_configure, 14317#endif 14318 .shutdown = bnx2x_shutdown, 14319}; 14320 14321static int __init bnx2x_init(void) 14322{ 14323 int ret; 14324 14325 pr_info("%s", version); 14326 14327 bnx2x_wq = create_singlethread_workqueue("bnx2x"); 14328 if (bnx2x_wq == NULL) { 14329 pr_err("Cannot create workqueue\n"); 14330 return -ENOMEM; 14331 } 14332 bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov"); 14333 if (!bnx2x_iov_wq) { 14334 pr_err("Cannot create iov workqueue\n"); 14335 destroy_workqueue(bnx2x_wq); 14336 return -ENOMEM; 14337 } 14338 14339 ret = pci_register_driver(&bnx2x_pci_driver); 14340 if (ret) { 14341 pr_err("Cannot register driver\n"); 14342 destroy_workqueue(bnx2x_wq); 14343 destroy_workqueue(bnx2x_iov_wq); 14344 } 14345 return ret; 14346} 14347 14348static void __exit bnx2x_cleanup(void) 14349{ 14350 struct list_head *pos, *q; 14351 14352 pci_unregister_driver(&bnx2x_pci_driver); 14353 14354 destroy_workqueue(bnx2x_wq); 14355 destroy_workqueue(bnx2x_iov_wq); 14356 14357 /* Free globally allocated resources */ 14358 list_for_each_safe(pos, q, &bnx2x_prev_list) { 14359 struct bnx2x_prev_path_list *tmp = 14360 list_entry(pos, struct bnx2x_prev_path_list, list); 14361 list_del(pos); 14362 kfree(tmp); 14363 } 14364} 14365 14366void bnx2x_notify_link_changed(struct bnx2x *bp) 14367{ 14368 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1); 14369} 14370 14371module_init(bnx2x_init); 14372module_exit(bnx2x_cleanup); 14373 14374/** 14375 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s). 14376 * 14377 * @bp: driver handle 14378 * @set: set or clear the CAM entry 14379 * 14380 * This function will wait until the ramrod completion returns. 14381 * Return 0 if success, -ENODEV if ramrod doesn't return. 14382 */ 14383static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp) 14384{ 14385 unsigned long ramrod_flags = 0; 14386 14387 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 14388 return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac, 14389 &bp->iscsi_l2_mac_obj, true, 14390 BNX2X_ISCSI_ETH_MAC, &ramrod_flags); 14391} 14392 14393/* count denotes the number of new completions we have seen */ 14394static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count) 14395{ 14396 struct eth_spe *spe; 14397 int cxt_index, cxt_offset; 14398 14399#ifdef BNX2X_STOP_ON_ERROR 14400 if (unlikely(bp->panic)) 14401 return; 14402#endif 14403 14404 spin_lock_bh(&bp->spq_lock); 14405 BUG_ON(bp->cnic_spq_pending < count); 14406 bp->cnic_spq_pending -= count; 14407 14408 for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) { 14409 u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type) 14410 & SPE_HDR_CONN_TYPE) >> 14411 SPE_HDR_CONN_TYPE_SHIFT; 14412 u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data) 14413 >> SPE_HDR_CMD_ID_SHIFT) & 0xff; 14414 14415 /* Set validation for iSCSI L2 client before sending SETUP 14416 * ramrod 14417 */ 14418 if (type == ETH_CONNECTION_TYPE) { 14419 if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) { 14420 cxt_index = BNX2X_ISCSI_ETH_CID(bp) / 14421 ILT_PAGE_CIDS; 14422 cxt_offset = BNX2X_ISCSI_ETH_CID(bp) - 14423 (cxt_index * ILT_PAGE_CIDS); 14424 bnx2x_set_ctx_validation(bp, 14425 &bp->context[cxt_index]. 14426 vcxt[cxt_offset].eth, 14427 BNX2X_ISCSI_ETH_CID(bp)); 14428 } 14429 } 14430 14431 /* 14432 * There may be not more than 8 L2, not more than 8 L5 SPEs 14433 * and in the air. We also check that number of outstanding 14434 * COMMON ramrods is not more than the EQ and SPQ can 14435 * accommodate. 14436 */ 14437 if (type == ETH_CONNECTION_TYPE) { 14438 if (!atomic_read(&bp->cq_spq_left)) 14439 break; 14440 else 14441 atomic_dec(&bp->cq_spq_left); 14442 } else if (type == NONE_CONNECTION_TYPE) { 14443 if (!atomic_read(&bp->eq_spq_left)) 14444 break; 14445 else 14446 atomic_dec(&bp->eq_spq_left); 14447 } else if ((type == ISCSI_CONNECTION_TYPE) || 14448 (type == FCOE_CONNECTION_TYPE)) { 14449 if (bp->cnic_spq_pending >= 14450 bp->cnic_eth_dev.max_kwqe_pending) 14451 break; 14452 else 14453 bp->cnic_spq_pending++; 14454 } else { 14455 BNX2X_ERR("Unknown SPE type: %d\n", type); 14456 bnx2x_panic(); 14457 break; 14458 } 14459 14460 spe = bnx2x_sp_get_next(bp); 14461 *spe = *bp->cnic_kwq_cons; 14462 14463 DP(BNX2X_MSG_SP, "pending on SPQ %d, on KWQ %d count %d\n", 14464 bp->cnic_spq_pending, bp->cnic_kwq_pending, count); 14465 14466 if (bp->cnic_kwq_cons == bp->cnic_kwq_last) 14467 bp->cnic_kwq_cons = bp->cnic_kwq; 14468 else 14469 bp->cnic_kwq_cons++; 14470 } 14471 bnx2x_sp_prod_update(bp); 14472 spin_unlock_bh(&bp->spq_lock); 14473} 14474 14475static int bnx2x_cnic_sp_queue(struct net_device *dev, 14476 struct kwqe_16 *kwqes[], u32 count) 14477{ 14478 struct bnx2x *bp = netdev_priv(dev); 14479 int i; 14480 14481#ifdef BNX2X_STOP_ON_ERROR 14482 if (unlikely(bp->panic)) { 14483 BNX2X_ERR("Can't post to SP queue while panic\n"); 14484 return -EIO; 14485 } 14486#endif 14487 14488 if ((bp->recovery_state != BNX2X_RECOVERY_DONE) && 14489 (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { 14490 BNX2X_ERR("Handling parity error recovery. Try again later\n"); 14491 return -EAGAIN; 14492 } 14493 14494 spin_lock_bh(&bp->spq_lock); 14495 14496 for (i = 0; i < count; i++) { 14497 struct eth_spe *spe = (struct eth_spe *)kwqes[i]; 14498 14499 if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT) 14500 break; 14501 14502 *bp->cnic_kwq_prod = *spe; 14503 14504 bp->cnic_kwq_pending++; 14505 14506 DP(BNX2X_MSG_SP, "L5 SPQE %x %x %x:%x pos %d\n", 14507 spe->hdr.conn_and_cmd_data, spe->hdr.type, 14508 spe->data.update_data_addr.hi, 14509 spe->data.update_data_addr.lo, 14510 bp->cnic_kwq_pending); 14511 14512 if (bp->cnic_kwq_prod == bp->cnic_kwq_last) 14513 bp->cnic_kwq_prod = bp->cnic_kwq; 14514 else 14515 bp->cnic_kwq_prod++; 14516 } 14517 14518 spin_unlock_bh(&bp->spq_lock); 14519 14520 if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending) 14521 bnx2x_cnic_sp_post(bp, 0); 14522 14523 return i; 14524} 14525 14526static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl) 14527{ 14528 struct cnic_ops *c_ops; 14529 int rc = 0; 14530 14531 mutex_lock(&bp->cnic_mutex); 14532 c_ops = rcu_dereference_protected(bp->cnic_ops, 14533 lockdep_is_held(&bp->cnic_mutex)); 14534 if (c_ops) 14535 rc = c_ops->cnic_ctl(bp->cnic_data, ctl); 14536 mutex_unlock(&bp->cnic_mutex); 14537 14538 return rc; 14539} 14540 14541static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl) 14542{ 14543 struct cnic_ops *c_ops; 14544 int rc = 0; 14545 14546 rcu_read_lock(); 14547 c_ops = rcu_dereference(bp->cnic_ops); 14548 if (c_ops) 14549 rc = c_ops->cnic_ctl(bp->cnic_data, ctl); 14550 rcu_read_unlock(); 14551 14552 return rc; 14553} 14554 14555/* 14556 * for commands that have no data 14557 */ 14558int bnx2x_cnic_notify(struct bnx2x *bp, int cmd) 14559{ 14560 struct cnic_ctl_info ctl = {0}; 14561 14562 ctl.cmd = cmd; 14563 14564 return bnx2x_cnic_ctl_send(bp, &ctl); 14565} 14566 14567static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err) 14568{ 14569 struct cnic_ctl_info ctl = {0}; 14570 14571 /* first we tell CNIC and only then we count this as a completion */ 14572 ctl.cmd = CNIC_CTL_COMPLETION_CMD; 14573 ctl.data.comp.cid = cid; 14574 ctl.data.comp.error = err; 14575 14576 bnx2x_cnic_ctl_send_bh(bp, &ctl); 14577 bnx2x_cnic_sp_post(bp, 0); 14578} 14579 14580/* Called with netif_addr_lock_bh() taken. 14581 * Sets an rx_mode config for an iSCSI ETH client. 14582 * Doesn't block. 14583 * Completion should be checked outside. 14584 */ 14585static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start) 14586{ 14587 unsigned long accept_flags = 0, ramrod_flags = 0; 14588 u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); 14589 int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED; 14590 14591 if (start) { 14592 /* Start accepting on iSCSI L2 ring. Accept all multicasts 14593 * because it's the only way for UIO Queue to accept 14594 * multicasts (in non-promiscuous mode only one Queue per 14595 * function will receive multicast packets (leading in our 14596 * case). 14597 */ 14598 __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags); 14599 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags); 14600 __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags); 14601 __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); 14602 14603 /* Clear STOP_PENDING bit if START is requested */ 14604 clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state); 14605 14606 sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED; 14607 } else 14608 /* Clear START_PENDING bit if STOP is requested */ 14609 clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state); 14610 14611 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) 14612 set_bit(sched_state, &bp->sp_state); 14613 else { 14614 __set_bit(RAMROD_RX, &ramrod_flags); 14615 bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0, 14616 ramrod_flags); 14617 } 14618} 14619 14620static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl) 14621{ 14622 struct bnx2x *bp = netdev_priv(dev); 14623 int rc = 0; 14624 14625 switch (ctl->cmd) { 14626 case DRV_CTL_CTXTBL_WR_CMD: { 14627 u32 index = ctl->data.io.offset; 14628 dma_addr_t addr = ctl->data.io.dma_addr; 14629 14630 bnx2x_ilt_wr(bp, index, addr); 14631 break; 14632 } 14633 14634 case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: { 14635 int count = ctl->data.credit.credit_count; 14636 14637 bnx2x_cnic_sp_post(bp, count); 14638 break; 14639 } 14640 14641 /* rtnl_lock is held. */ 14642 case DRV_CTL_START_L2_CMD: { 14643 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14644 unsigned long sp_bits = 0; 14645 14646 /* Configure the iSCSI classification object */ 14647 bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj, 14648 cp->iscsi_l2_client_id, 14649 cp->iscsi_l2_cid, BP_FUNC(bp), 14650 bnx2x_sp(bp, mac_rdata), 14651 bnx2x_sp_mapping(bp, mac_rdata), 14652 BNX2X_FILTER_MAC_PENDING, 14653 &bp->sp_state, BNX2X_OBJ_TYPE_RX, 14654 &bp->macs_pool); 14655 14656 /* Set iSCSI MAC address */ 14657 rc = bnx2x_set_iscsi_eth_mac_addr(bp); 14658 if (rc) 14659 break; 14660 14661 mmiowb(); 14662 barrier(); 14663 14664 /* Start accepting on iSCSI L2 ring */ 14665 14666 netif_addr_lock_bh(dev); 14667 bnx2x_set_iscsi_eth_rx_mode(bp, true); 14668 netif_addr_unlock_bh(dev); 14669 14670 /* bits to wait on */ 14671 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); 14672 __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits); 14673 14674 if (!bnx2x_wait_sp_comp(bp, sp_bits)) 14675 BNX2X_ERR("rx_mode completion timed out!\n"); 14676 14677 break; 14678 } 14679 14680 /* rtnl_lock is held. */ 14681 case DRV_CTL_STOP_L2_CMD: { 14682 unsigned long sp_bits = 0; 14683 14684 /* Stop accepting on iSCSI L2 ring */ 14685 netif_addr_lock_bh(dev); 14686 bnx2x_set_iscsi_eth_rx_mode(bp, false); 14687 netif_addr_unlock_bh(dev); 14688 14689 /* bits to wait on */ 14690 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); 14691 __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits); 14692 14693 if (!bnx2x_wait_sp_comp(bp, sp_bits)) 14694 BNX2X_ERR("rx_mode completion timed out!\n"); 14695 14696 mmiowb(); 14697 barrier(); 14698 14699 /* Unset iSCSI L2 MAC */ 14700 rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj, 14701 BNX2X_ISCSI_ETH_MAC, true); 14702 break; 14703 } 14704 case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: { 14705 int count = ctl->data.credit.credit_count; 14706 14707 smp_mb__before_atomic(); 14708 atomic_add(count, &bp->cq_spq_left); 14709 smp_mb__after_atomic(); 14710 break; 14711 } 14712 case DRV_CTL_ULP_REGISTER_CMD: { 14713 int ulp_type = ctl->data.register_data.ulp_type; 14714 14715 if (CHIP_IS_E3(bp)) { 14716 int idx = BP_FW_MB_IDX(bp); 14717 u32 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); 14718 int path = BP_PATH(bp); 14719 int port = BP_PORT(bp); 14720 int i; 14721 u32 scratch_offset; 14722 u32 *host_addr; 14723 14724 /* first write capability to shmem2 */ 14725 if (ulp_type == CNIC_ULP_ISCSI) 14726 cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; 14727 else if (ulp_type == CNIC_ULP_FCOE) 14728 cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE; 14729 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); 14730 14731 if ((ulp_type != CNIC_ULP_FCOE) || 14732 (!SHMEM2_HAS(bp, ncsi_oem_data_addr)) || 14733 (!(bp->flags & BC_SUPPORTS_FCOE_FEATURES))) 14734 break; 14735 14736 /* if reached here - should write fcoe capabilities */ 14737 scratch_offset = SHMEM2_RD(bp, ncsi_oem_data_addr); 14738 if (!scratch_offset) 14739 break; 14740 scratch_offset += offsetof(struct glob_ncsi_oem_data, 14741 fcoe_features[path][port]); 14742 host_addr = (u32 *) &(ctl->data.register_data. 14743 fcoe_features); 14744 for (i = 0; i < sizeof(struct fcoe_capabilities); 14745 i += 4) 14746 REG_WR(bp, scratch_offset + i, 14747 *(host_addr + i/4)); 14748 } 14749 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); 14750 break; 14751 } 14752 14753 case DRV_CTL_ULP_UNREGISTER_CMD: { 14754 int ulp_type = ctl->data.ulp_type; 14755 14756 if (CHIP_IS_E3(bp)) { 14757 int idx = BP_FW_MB_IDX(bp); 14758 u32 cap; 14759 14760 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); 14761 if (ulp_type == CNIC_ULP_ISCSI) 14762 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; 14763 else if (ulp_type == CNIC_ULP_FCOE) 14764 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE; 14765 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); 14766 } 14767 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); 14768 break; 14769 } 14770 14771 default: 14772 BNX2X_ERR("unknown command %x\n", ctl->cmd); 14773 rc = -EINVAL; 14774 } 14775 14776 /* For storage-only interfaces, change driver state */ 14777 if (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) { 14778 switch (ctl->drv_state) { 14779 case DRV_NOP: 14780 break; 14781 case DRV_ACTIVE: 14782 bnx2x_set_os_driver_state(bp, 14783 OS_DRIVER_STATE_ACTIVE); 14784 break; 14785 case DRV_INACTIVE: 14786 bnx2x_set_os_driver_state(bp, 14787 OS_DRIVER_STATE_DISABLED); 14788 break; 14789 case DRV_UNLOADED: 14790 bnx2x_set_os_driver_state(bp, 14791 OS_DRIVER_STATE_NOT_LOADED); 14792 break; 14793 default: 14794 BNX2X_ERR("Unknown cnic driver state: %d\n", ctl->drv_state); 14795 } 14796 } 14797 14798 return rc; 14799} 14800 14801static int bnx2x_get_fc_npiv(struct net_device *dev, 14802 struct cnic_fc_npiv_tbl *cnic_tbl) 14803{ 14804 struct bnx2x *bp = netdev_priv(dev); 14805 struct bdn_fc_npiv_tbl *tbl = NULL; 14806 u32 offset, entries; 14807 int rc = -EINVAL; 14808 int i; 14809 14810 if (!SHMEM2_HAS(bp, fc_npiv_nvram_tbl_addr[0])) 14811 goto out; 14812 14813 DP(BNX2X_MSG_MCP, "About to read the FC-NPIV table\n"); 14814 14815 tbl = kmalloc(sizeof(*tbl), GFP_KERNEL); 14816 if (!tbl) { 14817 BNX2X_ERR("Failed to allocate fc_npiv table\n"); 14818 goto out; 14819 } 14820 14821 offset = SHMEM2_RD(bp, fc_npiv_nvram_tbl_addr[BP_PORT(bp)]); 14822 DP(BNX2X_MSG_MCP, "Offset of FC-NPIV in NVRAM: %08x\n", offset); 14823 14824 /* Read the table contents from nvram */ 14825 if (bnx2x_nvram_read(bp, offset, (u8 *)tbl, sizeof(*tbl))) { 14826 BNX2X_ERR("Failed to read FC-NPIV table\n"); 14827 goto out; 14828 } 14829 14830 /* Since bnx2x_nvram_read() returns data in be32, we need to convert 14831 * the number of entries back to cpu endianness. 14832 */ 14833 entries = tbl->fc_npiv_cfg.num_of_npiv; 14834 entries = (__force u32)be32_to_cpu((__force __be32)entries); 14835 tbl->fc_npiv_cfg.num_of_npiv = entries; 14836 14837 if (!tbl->fc_npiv_cfg.num_of_npiv) { 14838 DP(BNX2X_MSG_MCP, 14839 "No FC-NPIV table [valid, simply not present]\n"); 14840 goto out; 14841 } else if (tbl->fc_npiv_cfg.num_of_npiv > MAX_NUMBER_NPIV) { 14842 BNX2X_ERR("FC-NPIV table with bad length 0x%08x\n", 14843 tbl->fc_npiv_cfg.num_of_npiv); 14844 goto out; 14845 } else { 14846 DP(BNX2X_MSG_MCP, "Read 0x%08x entries from NVRAM\n", 14847 tbl->fc_npiv_cfg.num_of_npiv); 14848 } 14849 14850 /* Copy the data into cnic-provided struct */ 14851 cnic_tbl->count = tbl->fc_npiv_cfg.num_of_npiv; 14852 for (i = 0; i < cnic_tbl->count; i++) { 14853 memcpy(cnic_tbl->wwpn[i], tbl->settings[i].npiv_wwpn, 8); 14854 memcpy(cnic_tbl->wwnn[i], tbl->settings[i].npiv_wwnn, 8); 14855 } 14856 14857 rc = 0; 14858out: 14859 kfree(tbl); 14860 return rc; 14861} 14862 14863void bnx2x_setup_cnic_irq_info(struct bnx2x *bp) 14864{ 14865 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14866 14867 if (bp->flags & USING_MSIX_FLAG) { 14868 cp->drv_state |= CNIC_DRV_STATE_USING_MSIX; 14869 cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX; 14870 cp->irq_arr[0].vector = bp->msix_table[1].vector; 14871 } else { 14872 cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX; 14873 cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX; 14874 } 14875 if (!CHIP_IS_E1x(bp)) 14876 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb; 14877 else 14878 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb; 14879 14880 cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp); 14881 cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp); 14882 cp->irq_arr[1].status_blk = bp->def_status_blk; 14883 cp->irq_arr[1].status_blk_num = DEF_SB_ID; 14884 cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID; 14885 14886 cp->num_irq = 2; 14887} 14888 14889void bnx2x_setup_cnic_info(struct bnx2x *bp) 14890{ 14891 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14892 14893 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 14894 bnx2x_cid_ilt_lines(bp); 14895 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; 14896 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); 14897 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); 14898 14899 DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n", 14900 BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid, 14901 cp->iscsi_l2_cid); 14902 14903 if (NO_ISCSI_OOO(bp)) 14904 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; 14905} 14906 14907static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops, 14908 void *data) 14909{ 14910 struct bnx2x *bp = netdev_priv(dev); 14911 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14912 int rc; 14913 14914 DP(NETIF_MSG_IFUP, "Register_cnic called\n"); 14915 14916 if (ops == NULL) { 14917 BNX2X_ERR("NULL ops received\n"); 14918 return -EINVAL; 14919 } 14920 14921 if (!CNIC_SUPPORT(bp)) { 14922 BNX2X_ERR("Can't register CNIC when not supported\n"); 14923 return -EOPNOTSUPP; 14924 } 14925 14926 if (!CNIC_LOADED(bp)) { 14927 rc = bnx2x_load_cnic(bp); 14928 if (rc) { 14929 BNX2X_ERR("CNIC-related load failed\n"); 14930 return rc; 14931 } 14932 } 14933 14934 bp->cnic_enabled = true; 14935 14936 bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL); 14937 if (!bp->cnic_kwq) 14938 return -ENOMEM; 14939 14940 bp->cnic_kwq_cons = bp->cnic_kwq; 14941 bp->cnic_kwq_prod = bp->cnic_kwq; 14942 bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT; 14943 14944 bp->cnic_spq_pending = 0; 14945 bp->cnic_kwq_pending = 0; 14946 14947 bp->cnic_data = data; 14948 14949 cp->num_irq = 0; 14950 cp->drv_state |= CNIC_DRV_STATE_REGD; 14951 cp->iro_arr = bp->iro_arr; 14952 14953 bnx2x_setup_cnic_irq_info(bp); 14954 14955 rcu_assign_pointer(bp->cnic_ops, ops); 14956 14957 /* Schedule driver to read CNIC driver versions */ 14958 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); 14959 14960 return 0; 14961} 14962 14963static int bnx2x_unregister_cnic(struct net_device *dev) 14964{ 14965 struct bnx2x *bp = netdev_priv(dev); 14966 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14967 14968 mutex_lock(&bp->cnic_mutex); 14969 cp->drv_state = 0; 14970 RCU_INIT_POINTER(bp->cnic_ops, NULL); 14971 mutex_unlock(&bp->cnic_mutex); 14972 synchronize_rcu(); 14973 bp->cnic_enabled = false; 14974 kfree(bp->cnic_kwq); 14975 bp->cnic_kwq = NULL; 14976 14977 return 0; 14978} 14979 14980static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) 14981{ 14982 struct bnx2x *bp = netdev_priv(dev); 14983 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14984 14985 /* If both iSCSI and FCoE are disabled - return NULL in 14986 * order to indicate CNIC that it should not try to work 14987 * with this device. 14988 */ 14989 if (NO_ISCSI(bp) && NO_FCOE(bp)) 14990 return NULL; 14991 14992 cp->drv_owner = THIS_MODULE; 14993 cp->chip_id = CHIP_ID(bp); 14994 cp->pdev = bp->pdev; 14995 cp->io_base = bp->regview; 14996 cp->io_base2 = bp->doorbells; 14997 cp->max_kwqe_pending = 8; 14998 cp->ctx_blk_size = CDU_ILT_PAGE_SZ; 14999 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 15000 bnx2x_cid_ilt_lines(bp); 15001 cp->ctx_tbl_len = CNIC_ILT_LINES; 15002 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; 15003 cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue; 15004 cp->drv_ctl = bnx2x_drv_ctl; 15005 cp->drv_get_fc_npiv_tbl = bnx2x_get_fc_npiv; 15006 cp->drv_register_cnic = bnx2x_register_cnic; 15007 cp->drv_unregister_cnic = bnx2x_unregister_cnic; 15008 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); 15009 cp->iscsi_l2_client_id = 15010 bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); 15011 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); 15012 15013 if (NO_ISCSI_OOO(bp)) 15014 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; 15015 15016 if (NO_ISCSI(bp)) 15017 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI; 15018 15019 if (NO_FCOE(bp)) 15020 cp->drv_state |= CNIC_DRV_STATE_NO_FCOE; 15021 15022 BNX2X_DEV_INFO( 15023 "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n", 15024 cp->ctx_blk_size, 15025 cp->ctx_tbl_offset, 15026 cp->ctx_tbl_len, 15027 cp->starting_cid); 15028 return cp; 15029} 15030 15031static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) 15032{ 15033 struct bnx2x *bp = fp->bp; 15034 u32 offset = BAR_USTRORM_INTMEM; 15035 15036 if (IS_VF(bp)) 15037 return bnx2x_vf_ustorm_prods_offset(bp, fp); 15038 else if (!CHIP_IS_E1x(bp)) 15039 offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); 15040 else 15041 offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); 15042 15043 return offset; 15044} 15045 15046/* called only on E1H or E2. 15047 * When pretending to be PF, the pretend value is the function number 0...7 15048 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID 15049 * combination 15050 */ 15051int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) 15052{ 15053 u32 pretend_reg; 15054 15055 if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX) 15056 return -1; 15057 15058 /* get my own pretend register */ 15059 pretend_reg = bnx2x_get_pretend_reg(bp); 15060 REG_WR(bp, pretend_reg, pretend_func_val); 15061 REG_RD(bp, pretend_reg); 15062 return 0; 15063} 15064 15065static void bnx2x_ptp_task(struct work_struct *work) 15066{ 15067 struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task); 15068 int port = BP_PORT(bp); 15069 u32 val_seq; 15070 u64 timestamp, ns; 15071 struct skb_shared_hwtstamps shhwtstamps; 15072 15073 /* Read Tx timestamp registers */ 15074 val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : 15075 NIG_REG_P0_TLLH_PTP_BUF_SEQID); 15076 if (val_seq & 0x10000) { 15077 /* There is a valid timestamp value */ 15078 timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB : 15079 NIG_REG_P0_TLLH_PTP_BUF_TS_MSB); 15080 timestamp <<= 32; 15081 timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB : 15082 NIG_REG_P0_TLLH_PTP_BUF_TS_LSB); 15083 /* Reset timestamp register to allow new timestamp */ 15084 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : 15085 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); 15086 ns = timecounter_cyc2time(&bp->timecounter, timestamp); 15087 15088 memset(&shhwtstamps, 0, sizeof(shhwtstamps)); 15089 shhwtstamps.hwtstamp = ns_to_ktime(ns); 15090 skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps); 15091 dev_kfree_skb_any(bp->ptp_tx_skb); 15092 bp->ptp_tx_skb = NULL; 15093 15094 DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n", 15095 timestamp, ns); 15096 } else { 15097 DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n"); 15098 /* Reschedule to keep checking for a valid timestamp value */ 15099 schedule_work(&bp->ptp_task); 15100 } 15101} 15102 15103void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb) 15104{ 15105 int port = BP_PORT(bp); 15106 u64 timestamp, ns; 15107 15108 timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB : 15109 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB); 15110 timestamp <<= 32; 15111 timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB : 15112 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB); 15113 15114 /* Reset timestamp register to allow new timestamp */ 15115 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : 15116 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); 15117 15118 ns = timecounter_cyc2time(&bp->timecounter, timestamp); 15119 15120 skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns); 15121 15122 DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n", 15123 timestamp, ns); 15124} 15125 15126/* Read the PHC */ 15127static cycle_t bnx2x_cyclecounter_read(const struct cyclecounter *cc) 15128{ 15129 struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter); 15130 int port = BP_PORT(bp); 15131 u32 wb_data[2]; 15132 u64 phc_cycles; 15133 15134 REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 : 15135 NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2); 15136 phc_cycles = wb_data[1]; 15137 phc_cycles = (phc_cycles << 32) + wb_data[0]; 15138 15139 DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles); 15140 15141 return phc_cycles; 15142} 15143 15144static void bnx2x_init_cyclecounter(struct bnx2x *bp) 15145{ 15146 memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter)); 15147 bp->cyclecounter.read = bnx2x_cyclecounter_read; 15148 bp->cyclecounter.mask = CYCLECOUNTER_MASK(64); 15149 bp->cyclecounter.shift = 1; 15150 bp->cyclecounter.mult = 1; 15151} 15152 15153static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp) 15154{ 15155 struct bnx2x_func_state_params func_params = {NULL}; 15156 struct bnx2x_func_set_timesync_params *set_timesync_params = 15157 &func_params.params.set_timesync; 15158 15159 /* Prepare parameters for function state transitions */ 15160 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 15161 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 15162 15163 func_params.f_obj = &bp->func_obj; 15164 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; 15165 15166 /* Function parameters */ 15167 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET; 15168 set_timesync_params->offset_cmd = TS_OFFSET_KEEP; 15169 15170 return bnx2x_func_state_change(bp, &func_params); 15171} 15172 15173static int bnx2x_enable_ptp_packets(struct bnx2x *bp) 15174{ 15175 struct bnx2x_queue_state_params q_params; 15176 int rc, i; 15177 15178 /* send queue update ramrod to enable PTP packets */ 15179 memset(&q_params, 0, sizeof(q_params)); 15180 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); 15181 q_params.cmd = BNX2X_Q_CMD_UPDATE; 15182 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, 15183 &q_params.params.update.update_flags); 15184 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS, 15185 &q_params.params.update.update_flags); 15186 15187 /* send the ramrod on all the queues of the PF */ 15188 for_each_eth_queue(bp, i) { 15189 struct bnx2x_fastpath *fp = &bp->fp[i]; 15190 15191 /* Set the appropriate Queue object */ 15192 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 15193 15194 /* Update the Queue state */ 15195 rc = bnx2x_queue_state_change(bp, &q_params); 15196 if (rc) { 15197 BNX2X_ERR("Failed to enable PTP packets\n"); 15198 return rc; 15199 } 15200 } 15201 15202 return 0; 15203} 15204 15205int bnx2x_configure_ptp_filters(struct bnx2x *bp) 15206{ 15207 int port = BP_PORT(bp); 15208 int rc; 15209 15210 if (!bp->hwtstamp_ioctl_called) 15211 return 0; 15212 15213 switch (bp->tx_type) { 15214 case HWTSTAMP_TX_ON: 15215 bp->flags |= TX_TIMESTAMPING_EN; 15216 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : 15217 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x6AA); 15218 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : 15219 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3EEE); 15220 break; 15221 case HWTSTAMP_TX_ONESTEP_SYNC: 15222 BNX2X_ERR("One-step timestamping is not supported\n"); 15223 return -ERANGE; 15224 } 15225 15226 switch (bp->rx_filter) { 15227 case HWTSTAMP_FILTER_NONE: 15228 break; 15229 case HWTSTAMP_FILTER_ALL: 15230 case HWTSTAMP_FILTER_SOME: 15231 bp->rx_filter = HWTSTAMP_FILTER_NONE; 15232 break; 15233 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: 15234 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: 15235 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: 15236 bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; 15237 /* Initialize PTP detection for UDP/IPv4 events */ 15238 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 15239 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EE); 15240 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 15241 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFE); 15242 break; 15243 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: 15244 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: 15245 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: 15246 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; 15247 /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */ 15248 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 15249 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EA); 15250 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 15251 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FEE); 15252 break; 15253 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: 15254 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: 15255 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: 15256 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; 15257 /* Initialize PTP detection L2 events */ 15258 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 15259 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6BF); 15260 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 15261 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EFF); 15262 15263 break; 15264 case HWTSTAMP_FILTER_PTP_V2_EVENT: 15265 case HWTSTAMP_FILTER_PTP_V2_SYNC: 15266 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: 15267 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; 15268 /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */ 15269 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 15270 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6AA); 15271 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 15272 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EEE); 15273 break; 15274 } 15275 15276 /* Indicate to FW that this PF expects recorded PTP packets */ 15277 rc = bnx2x_enable_ptp_packets(bp); 15278 if (rc) 15279 return rc; 15280 15281 /* Enable sending PTP packets to host */ 15282 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : 15283 NIG_REG_P0_LLH_PTP_TO_HOST, 0x1); 15284 15285 return 0; 15286} 15287 15288static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr) 15289{ 15290 struct hwtstamp_config config; 15291 int rc; 15292 15293 DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n"); 15294 15295 if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) 15296 return -EFAULT; 15297 15298 DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n", 15299 config.tx_type, config.rx_filter); 15300 15301 if (config.flags) { 15302 BNX2X_ERR("config.flags is reserved for future use\n"); 15303 return -EINVAL; 15304 } 15305 15306 bp->hwtstamp_ioctl_called = 1; 15307 bp->tx_type = config.tx_type; 15308 bp->rx_filter = config.rx_filter; 15309 15310 rc = bnx2x_configure_ptp_filters(bp); 15311 if (rc) 15312 return rc; 15313 15314 config.rx_filter = bp->rx_filter; 15315 15316 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? 15317 -EFAULT : 0; 15318} 15319 15320/* Configures HW for PTP */ 15321static int bnx2x_configure_ptp(struct bnx2x *bp) 15322{ 15323 int rc, port = BP_PORT(bp); 15324 u32 wb_data[2]; 15325 15326 /* Reset PTP event detection rules - will be configured in the IOCTL */ 15327 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 15328 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); 15329 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 15330 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); 15331 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : 15332 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); 15333 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : 15334 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); 15335 15336 /* Disable PTP packets to host - will be configured in the IOCTL*/ 15337 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : 15338 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); 15339 15340 /* Enable the PTP feature */ 15341 REG_WR(bp, port ? NIG_REG_P1_PTP_EN : 15342 NIG_REG_P0_PTP_EN, 0x3F); 15343 15344 /* Enable the free-running counter */ 15345 wb_data[0] = 0; 15346 wb_data[1] = 0; 15347 REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2); 15348 15349 /* Reset drift register (offset register is not reset) */ 15350 rc = bnx2x_send_reset_timesync_ramrod(bp); 15351 if (rc) { 15352 BNX2X_ERR("Failed to reset PHC drift register\n"); 15353 return -EFAULT; 15354 } 15355 15356 /* Reset possibly old timestamps */ 15357 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : 15358 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); 15359 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : 15360 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); 15361 15362 return 0; 15363} 15364 15365/* Called during load, to initialize PTP-related stuff */ 15366void bnx2x_init_ptp(struct bnx2x *bp) 15367{ 15368 int rc; 15369 15370 /* Configure PTP in HW */ 15371 rc = bnx2x_configure_ptp(bp); 15372 if (rc) { 15373 BNX2X_ERR("Stopping PTP initialization\n"); 15374 return; 15375 } 15376 15377 /* Init work queue for Tx timestamping */ 15378 INIT_WORK(&bp->ptp_task, bnx2x_ptp_task); 15379 15380 /* Init cyclecounter and timecounter. This is done only in the first 15381 * load. If done in every load, PTP application will fail when doing 15382 * unload / load (e.g. MTU change) while it is running. 15383 */ 15384 if (!bp->timecounter_init_done) { 15385 bnx2x_init_cyclecounter(bp); 15386 timecounter_init(&bp->timecounter, &bp->cyclecounter, 15387 ktime_to_ns(ktime_get_real())); 15388 bp->timecounter_init_done = 1; 15389 } 15390 15391 DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n"); 15392} 15393