1#
2# Ethernet LAN device configuration
3#
4
5menuconfig ETHERNET
6	bool "Ethernet driver support"
7	depends on NET
8	default y
9	---help---
10	  This section contains all the Ethernet device drivers.
11
12if ETHERNET
13
14config MDIO
15	tristate
16
17config SUNGEM_PHY
18	tristate
19
20source "drivers/net/ethernet/3com/Kconfig"
21source "drivers/net/ethernet/adaptec/Kconfig"
22source "drivers/net/ethernet/aeroflex/Kconfig"
23source "drivers/net/ethernet/agere/Kconfig"
24source "drivers/net/ethernet/allwinner/Kconfig"
25source "drivers/net/ethernet/alteon/Kconfig"
26source "drivers/net/ethernet/altera/Kconfig"
27source "drivers/net/ethernet/amd/Kconfig"
28source "drivers/net/ethernet/apm/Kconfig"
29source "drivers/net/ethernet/apple/Kconfig"
30source "drivers/net/ethernet/arc/Kconfig"
31source "drivers/net/ethernet/atheros/Kconfig"
32source "drivers/net/ethernet/aurora/Kconfig"
33source "drivers/net/ethernet/cadence/Kconfig"
34source "drivers/net/ethernet/adi/Kconfig"
35source "drivers/net/ethernet/broadcom/Kconfig"
36source "drivers/net/ethernet/brocade/Kconfig"
37source "drivers/net/ethernet/calxeda/Kconfig"
38source "drivers/net/ethernet/cavium/Kconfig"
39source "drivers/net/ethernet/chelsio/Kconfig"
40source "drivers/net/ethernet/cirrus/Kconfig"
41source "drivers/net/ethernet/cisco/Kconfig"
42
43config CX_ECAT
44	tristate "Beckhoff CX5020 EtherCAT master support"
45	depends on PCI
46	depends on X86 || COMPILE_TEST
47	---help---
48	  Driver for EtherCAT master module located on CCAT FPGA
49	  that can be found on Beckhoff CX5020, and possibly other of CX
50	  Beckhoff CX series industrial PCs.
51
52	  To compile this driver as a module, choose M here. The module
53	  will be called ec_bhf.
54
55source "drivers/net/ethernet/davicom/Kconfig"
56
57config DNET
58	tristate "Dave ethernet support (DNET)"
59	depends on HAS_IOMEM
60	select PHYLIB
61	---help---
62	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
63	  Say Y to include support for the DNET chip.
64
65	  To compile this driver as a module, choose M here: the module
66	  will be called dnet.
67
68source "drivers/net/ethernet/dec/Kconfig"
69source "drivers/net/ethernet/dlink/Kconfig"
70source "drivers/net/ethernet/emulex/Kconfig"
71source "drivers/net/ethernet/ezchip/Kconfig"
72source "drivers/net/ethernet/neterion/Kconfig"
73source "drivers/net/ethernet/faraday/Kconfig"
74source "drivers/net/ethernet/freescale/Kconfig"
75source "drivers/net/ethernet/fujitsu/Kconfig"
76source "drivers/net/ethernet/hisilicon/Kconfig"
77source "drivers/net/ethernet/hp/Kconfig"
78source "drivers/net/ethernet/ibm/Kconfig"
79source "drivers/net/ethernet/intel/Kconfig"
80source "drivers/net/ethernet/i825xx/Kconfig"
81source "drivers/net/ethernet/xscale/Kconfig"
82
83config JME
84	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
85	depends on PCI
86	select CRC32
87	select MII
88	---help---
89	  This driver supports the PCI-Express gigabit ethernet adapters
90	  based on JMicron JMC250 chipset.
91
92	  To compile this driver as a module, choose M here. The module
93	  will be called jme.
94
95config KORINA
96	tristate "Korina (IDT RC32434) Ethernet support"
97	depends on MIKROTIK_RB532
98	---help---
99	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
100	  based system say Y. Otherwise say N.
101
102config LANTIQ_ETOP
103	tristate "Lantiq SoC ETOP driver"
104	depends on SOC_TYPE_XWAY
105	---help---
106	  Support for the MII0 inside the Lantiq SoC
107
108source "drivers/net/ethernet/marvell/Kconfig"
109source "drivers/net/ethernet/mellanox/Kconfig"
110source "drivers/net/ethernet/micrel/Kconfig"
111source "drivers/net/ethernet/microchip/Kconfig"
112source "drivers/net/ethernet/moxa/Kconfig"
113source "drivers/net/ethernet/myricom/Kconfig"
114
115config FEALNX
116	tristate "Myson MTD-8xx PCI Ethernet support"
117	depends on PCI
118	select CRC32
119	select MII
120	---help---
121	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
122	  cards. <http://www.myson.com.tw/>
123
124source "drivers/net/ethernet/natsemi/Kconfig"
125source "drivers/net/ethernet/8390/Kconfig"
126
127config NET_NETX
128	tristate "NetX Ethernet support"
129	select MII
130	depends on ARCH_NETX
131	---help---
132	  This is support for the Hilscher netX builtin Ethernet ports
133
134	  To compile this driver as a module, choose M here. The module
135	  will be called netx-eth.
136
137source "drivers/net/ethernet/nuvoton/Kconfig"
138source "drivers/net/ethernet/nvidia/Kconfig"
139source "drivers/net/ethernet/nxp/Kconfig"
140source "drivers/net/ethernet/octeon/Kconfig"
141source "drivers/net/ethernet/oki-semi/Kconfig"
142
143config ETHOC
144	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
145	depends on HAS_IOMEM && HAS_DMA
146	select MII
147	select PHYLIB
148	select CRC32
149	select BITREVERSE
150	---help---
151	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
152
153source "drivers/net/ethernet/packetengines/Kconfig"
154source "drivers/net/ethernet/pasemi/Kconfig"
155source "drivers/net/ethernet/qlogic/Kconfig"
156source "drivers/net/ethernet/qualcomm/Kconfig"
157source "drivers/net/ethernet/realtek/Kconfig"
158source "drivers/net/ethernet/renesas/Kconfig"
159source "drivers/net/ethernet/rdc/Kconfig"
160source "drivers/net/ethernet/rocker/Kconfig"
161source "drivers/net/ethernet/samsung/Kconfig"
162source "drivers/net/ethernet/seeq/Kconfig"
163source "drivers/net/ethernet/silan/Kconfig"
164source "drivers/net/ethernet/sis/Kconfig"
165source "drivers/net/ethernet/sfc/Kconfig"
166source "drivers/net/ethernet/sgi/Kconfig"
167source "drivers/net/ethernet/smsc/Kconfig"
168source "drivers/net/ethernet/stmicro/Kconfig"
169source "drivers/net/ethernet/sun/Kconfig"
170source "drivers/net/ethernet/synopsys/Kconfig"
171source "drivers/net/ethernet/tehuti/Kconfig"
172source "drivers/net/ethernet/ti/Kconfig"
173source "drivers/net/ethernet/tile/Kconfig"
174source "drivers/net/ethernet/toshiba/Kconfig"
175source "drivers/net/ethernet/tundra/Kconfig"
176source "drivers/net/ethernet/via/Kconfig"
177source "drivers/net/ethernet/wiznet/Kconfig"
178source "drivers/net/ethernet/xilinx/Kconfig"
179source "drivers/net/ethernet/xircom/Kconfig"
180
181endif # ETHERNET
182